1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-13 19:50:18 +02:00
Commit Graph

9 Commits

Author SHA1 Message Date
nbd
7231ec09a2 x86: turn off CONFIG_X86_GENERIC for geos and net5501
CONFIG_X86_GENERIC obscures CONFIG_MGEODE_LX, etc. and causes it to use wrong cache-line size.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24071 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-21 22:56:33 +00:00
nbd
b6b0015701 x86: refresh config, enable pci express support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24026 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-17 22:41:17 +00:00
florian
33c8f09edf [x86] net5501: Add features to net5501 and remove HID support (unneeded)
Since the net5501 doesn't have a VGA port, it doesn't need HID support either --
 all console access will be over a serial port.

Also add FEATURES to it as well.

Signed-of-by: Philip Prindeville <philip@redfish-solutions.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23916 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-07 20:37:40 +00:00
florian
cf5ff97899 [package] add kmod-leds-net5501
Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23729 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-30 22:35:59 +00:00
florian
a11e799408 [x86] resync config-default, enable gpio support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23727 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-30 22:35:50 +00:00
florian
6c229e586f [x86] Use -pipe for net5501 and geos CFLAGS, same as all of the other platforms
Makes the builds run slightly faster on multicores.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23495 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-17 12:42:06 +00:00
nbd
ebf957be00 x86: turn on optimizations for net5501 (patch by Philip A. Prindeville)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23104 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-09-20 22:14:07 +00:00
nico
7716517d56 package/kernel: use common gpio- & wdt- prefixes for GPIO and watchdog module names
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21137 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-24 14:08:49 +00:00
florian
8ff8151448 [x86] add net5501 support
This patch brings up the net5501 platform.

Note that the x86/ target included support for all x86/ class
processors.  That's not technically correct.  This should be constrained
only to the "generic" subtarget.  Every x86-class target that isn't
generic should be able to select only the optimizations/capabilities
applicable to that architectural variant.

It's also assumed that all x86 processors have keyboard & mouse ports,
ISA, DMI, ACPI... the embedded ones typically don't.  Again, moving
that to the generic subtarget.

Fortunately, this was a fairly benign tweak.

The net5501 board includes the following logic:

Geode/LX processor
CS5535 super-I/O chip
PC87360 sensor chip
Via Rhine Ethernet controllers
Via Sata controllers
USB, LEDS, I2C

Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20794 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-11 12:36:55 +00:00