qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-18 07:54:59 +02:00
Code
25,484 Commits 13 Branches 0 Tags 117 MiB
db874d1cb5
Commit Graph

10190 Commits

Author SHA1 Message Date
Xiangfu
db874d1cb5 xburst: ben nanonote: disable wpan kernel options, should be build as module 2012-12-28 10:30:01 +08:00
Xiangfu
05b58eba39 xburst: ben-wpan: fix atusb cannot build as module 2012-12-28 10:30:00 +08:00
Xiangfu
098317b74e xburst: add ben-wpan support 2012-12-28 10:24:14 +08:00
Xiangfu
4a16fa46b4 xburst: ben nanonote:: add ks7010 wrieless card support 2012-12-28 10:24:14 +08:00
nbd
5e4cd88141 kernel: remove the cisco SIP NAT patch, at least on 3.6 it crashes 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34901 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-27 22:59:51 +00:00
hauke
73af5c02d5 brcm47xx: bcma: correct M25P32 serial flash ID 
Thank you Rafał Miłecki.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34900 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-27 19:18:40 +00:00
juhosg
7d9a07b855 mpc83xx: add support for 3.7 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34892 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-26 10:40:54 +00:00
juhosg
1c7dd15a1f mpc83xx: nuke 3.3 support 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34891 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-26 10:40:51 +00:00
juhosg
44b21b72fa mpc83xx: switch to 3.6.11 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34890 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-26 10:40:50 +00:00
juhosg
575b583b39 mpc83xx: add support for 3.6 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34889 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-26 10:40:48 +00:00
juhosg
c1f1e7ccd4 mpc83xx: create package for the rbppc_cf module 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34888 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-26 10:40:47 +00:00
juhosg
0714f3921b generic: more missing symbols for 3.{6,7} 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34887 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-26 10:40:41 +00:00
juhosg
2aa10d55c9 ar71xx: build image for the AP136-020 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34886 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-26 09:50:37 +00:00
juhosg
bb447a9202 ar71xx: add user-space support for AP136-020 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34885 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-26 09:50:36 +00:00
juhosg
215bda85a8 ar71xx: add kernel support for the AP136-020 board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34884 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-26 09:50:34 +00:00
juhosg
4dc5f1942d ar71xx: rename AP136 to AP136-010 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34883 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-26 09:50:31 +00:00
juhosg
e495dc2e71 ar71xx: dynamically set AR8327's PAD configuration on AP136 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34882 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-25 18:45:32 +00:00
juhosg
a735287d68 generic: ar8216: add sgmii_delay_en field to ar8327_platform_data 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34881 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-25 18:45:31 +00:00
juhosg
ffbe131263 ar71xx: ag71xx: show PHY interface mode in dmesg 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34880 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-25 18:45:29 +00:00
juhosg
d3ca1d22b3 ramips: fix ASUS WL-330N3G MAC address 
The ASUS WL-330N and WL-330N3G has the MAC address stored at
offset 4, not 40. This is verified by reading original ASUS
firmware GPL_WL-330N3G_source.1028/user/rc/common_ex.c and
GPL_WL-330N_source.1021/user/rc/common_ex.c.

Tested on WL-330N3G, it now gets the same MAC as is printed on
the label on the router.

Signed-off-by: Jan Kardell <jan.kardell@arkub.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34877 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-24 06:52:41 +00:00
juhosg
e6076b9d37 ramips: fix wifi EEPROM extraction on DIR-615-Dx models 
Patch from #12636.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34876 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-24 06:52:38 +00:00
kaloz
bb460376f5 [cns3xxx]: add nol2x0 cmdline to disable l2x0 cache 
L2 cache via L2X0 cache controller available on some ARM boards can
provide a performance boost in some situations but decrease performance
in others.  This adds a kernel cmdline to disable L2X0 for cns3xxx based
boards.
 
Signed-off-by: Tim Harvey <tharvey@gateworks.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34874 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-23 18:53:38 +00:00
juhosg
7eb00109f8 generic: ar8216: don't use 0 as default VID on AR8327 
VID0 is reserved for priority-tagged packets.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34862 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-22 18:30:04 +00:00
juhosg
b84d44e379 generic: more missing symbols for 3.{6,7} 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34861 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-22 17:22:41 +00:00
juhosg
9798fec0b3 ramips: unify eeprom file name for the built-in wireless MAC 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34860 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-22 16:09:03 +00:00
juhosg
4d004cb552 ramips: rt3883: fix build error 
The cpuport_cfg field has been renamed to port0_cfg.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34859 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-22 13:50:47 +00:00
juhosg
aa80373147 ar71xx: register the second ethernet interface on the AP136 
Also fix the default network configuration
according to the new setup.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34854 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-22 12:12:50 +00:00
juhosg
5af4f72904 ar71xx: fix ethernet device registration for QCA9558 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34853 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-22 12:12:48 +00:00
juhosg
6c2c55144e ar71xx: rename QCA9558 ETH_CFG bit defines 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34852 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-22 12:12:46 +00:00
juhosg
0da7fc3cdc ar71xx: fixup allowed PHY interface types for QCA9558 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34851 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-22 12:12:44 +00:00
juhosg
e52fbd2289 ar71xx: don't assign any MII bus device on QCA9558 by default 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34850 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-22 12:12:43 +00:00
juhosg
661316a678 ar71xx: ag71xx: fix mii_bus_dev sanity check 
The mii_bus device is not required if phy_mask is zero.
The driver will use a fixed connection if it is not
specified.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34849 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-22 12:12:41 +00:00
juhosg
5e4cac78d5 ar71xx: ag71xx: don't start/stop built-in switch w/o mii_bus_dev 
Trying to do that causes a NULL pointer dereference:

CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 801d170c, ra == 801d18d4
Oops[#1]:
Cpu 0
$ 0   : 00000000 00000000 00000000 00000001
$ 4   : 00000000 802e6390 ffff8f45 00000001
$ 8   : 804b5360 ffffff80 802f93bc 00000000
$12   : 802f93e8 00000000 00000000 00000000
$16   : 8381aba0 8381aba0 00000000 00000000
$20   : 8295eff0 00000032 80000000 004101b8
$24   : 00000000 777265b0
$28   : 82936000 82937cf0 00420000 801d18d4
Hi    : 00000000
Lo    : 00000001
epc   : 801d170c ar7240sw_reset+0x1c/0x19c
    Tainted: G           O
ra    : 801d18d4 ag71xx_ar7240_start+0x28/0xc0
Status: 1100fc03    KERNEL EXL IE
Cause : 00800008
BadVA : 00000000
PrId  : 00019750 (MIPS 74Kc)
Modules linked in: ath79_wdt ohci_hcd ledtrig_usbdev ledtrig_netdev
nf_nat_irc nf_nat_ftp nf_conntrack_irc nf_conntrack_ftp
 ipt_MASQUERADE iptable_nat nf_nat pppoe xt_conntrack xt_CT xt_NOTRACK
iptable_raw xt_state nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack
ehci_hcd pppox ipt_REJECT xt_TCPMSS xt_LOG xt_comment xt_multiport
xt_mac xt_limit iptable_mangle iptable_filter ip_tables xt_tcpudp x_tab
les ppp_async ppp_generic slhc ath9k(O) ath9k_common(O) ath9k_hw(O)
ath(O) mac80211(O) usbcore usb_common nls_base crc_ccitt cfg80211(O) c
ompat(O) arc4 aes_generic crypto_blkcipher cryptomgr aead crypto_hash
crypto_algapi ledtrig_timer ledtrig_default_on leds_gpio gpio_button
_hotplug(O)
Process netifd (pid: 677, threadinfo=82936000, task=82cbe140, tls=77803750)
Stack : ffffffff 80087900 00000001 82937d74 8381aba0 8381aba0 00000000 00000000
        8295eff0 801d18d4 8295eff0 801fa4a4 00420000 80092158 00000002 8381aba0
        8381a800 00000000 00000080 801cf900 8027e720 00000000 00000000 8009223c
        8381a800 8381a82c 8027e720 00000000 00000000 7f9d14f0 00420000 801ec08c
        8381a800 801ebfb0 33000000 82937e30 00000001 8381a800 00001003 801ec348
        ...
Call Trace:
[<801d170c>] ar7240sw_reset+0x1c/0x19c
[<801d18d4>] ag71xx_ar7240_start+0x28/0xc0
[<801cf900>] ag71xx_open+0x1d0/0x258
[<801ec08c>] __dev_open+0xcc/0x130
[<801ec348>] __dev_change_flags+0xc0/0x160
[<801ec490>] dev_change_flags+0x20/0x6c
[<801ec5c8>] dev_ifsioc+0xec/0x348
[<801ecdb8>] dev_ioctl+0x594/0x67c
[<800ec00c>] do_vfs_ioctl+0x598/0x5ec
[<800ec0b0>] sys_ioctl+0x50/0x90
[<8006a3c4>] stack_done+0x20/0x40
Code: afbf0024  afb40020  afb10014 <8c910000> 00809021  24100104 24130704  8e440000  02002821

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34848 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-22 12:12:40 +00:00
juhosg
565673cb04 generic: ar8316: allow to configure port 6 via platform data on AR8327 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34847 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-22 12:12:37 +00:00
juhosg
e1ab1fcace generic: ar8216: rename cpuport_cfg to port0_cfg in ar8327_platform_data 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34846 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-22 12:12:35 +00:00
juhosg
e39812dd92 ramips: add support for 3.7 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34845 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-22 12:11:13 +00:00
juhosg
e8e5a1eaf8 ramips: convert to use {e,o}hci-platform driver 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34843 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-22 12:11:08 +00:00
juhosg
c4dd6997f2 generic/3.6: add platform specific power callbacks to {e,o}hci_platform drivers 
Backport of upstream commits:

86e4cb35f2260374df4139c2352afe7fe247cb60 usb: host: ehci-platform: BUG_ON() to WARN_ON() on probe
b6dd245c4594482d46507a0bfd100439be367952 usb: host: ohci-platform: BUG_ON() to WARN_ON() on probe
04216bedafb1b3992a6c2b7f1518281d2ba5fc7b usb: host: ehci-platform: add platform specific power callback
e4d37aeb373a5edceecc1dadc76fabbe8bc18e44 usb: host: ohci-platform: addplatform specific power callback

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34842 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-22 12:11:06 +00:00
blogic
08cce55d9c [lantiq] ar9 did not load atm driver properly 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34840 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-22 10:16:52 +00:00
blogic
881b3504ae [lantiq] dont use input layer for gpio buttons 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34839 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-21 20:04:20 +00:00
blogic
cef3fba37d [lantiq] default switch setup for WBMR 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34838 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-21 20:04:12 +00:00
blogic
d8df31cd7d [lantiq] Setting the MDC clock to 2.5MHz and changing the mii mode to rgmii seems to fix the communication issues with the ar8316 switch. (ticket #11143) 
Tested only on the wbmr-hp-g300h, could affect/break other devices.

Signed-off-by: Sebastian Mayr <sebastian.mayr@student.uibk.ac.at>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34837 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-21 20:04:04 +00:00
blogic
41d3a10f48 [lantiq] adds script to set wps info on boards with a wps button 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34836 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-21 20:03:59 +00:00
blogic
41afc96ae1 [lantiq] minor tweaks to WBMR image 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34835 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-21 20:03:54 +00:00
blogic
b05c7e7166 [lantiq] add missing PHY_BASIC_FEATURES to 100mbit phys 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34826 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-21 14:41:35 +00:00
blogic
0ca5ac81bb [lantiq] fix typo inside fritz3370 devicetree file 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34825 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-21 14:41:30 +00:00
blogic
29c2480435 [lantiq] more devicetree fixes 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34824 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-21 13:47:55 +00:00
blogic
1b259a2387 [lantiq] improve button handling 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34823 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-21 13:47:50 +00:00
blogic
5fb086db47 [lantiq] add phy-reset gpio handling to xrx200-net 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34822 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-21 13:47:44 +00:00
blogic
e8f1a67a24 [lantiq] add more lantiq phy ids based on daniels uboot code 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34821 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-21 13:47:40 +00:00