qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-18 11:36:16 +02:00
Code
25,484 Commits 13 Branches 0 Tags 117 MiB
db874d1cb5
Commit Graph

21 Commits

Author SHA1 Message Date
mirko
53edda1e36 Do not overload mount-call - trying to reduce confusion 
The behaviour of calling 'mount' differed depending on whether it called
the busybox-mount, the mount of util-linux, the mount defined in
/lib/functions.sh and /lib/functions/boot.sh

/etc/preinit even included /lib/functions.sh and /lib/functions/boot.sh,
both re-defining 'mount'.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34792 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-19 16:07:46 +00:00
florian
db5048901e kernel: add missing USB configuration symbols after r34501 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34568 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-07 11:01:53 +00:00
juhosg
d87b48bbe9 x86: remove support for old kernels 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31804 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-18 20:10:42 +00:00
juhosg
336ab20ec5 x86: remove subtarget specific LINUX_VERSION overrides 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31803 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-18 20:10:38 +00:00
juhosg
f2569ecf09 x86/olpc: switch to 3.3 
Compile tested only.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31784 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-18 09:57:32 +00:00
juhosg
005d04baef x86: sync 2.6.39 configs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31749 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-16 10:44:49 +00:00
juhosg
5cc763c7b2 linux: move certain disabled symbols to the generic configs 
* CONFIG_ARCH_DMA_ADDR_T_64BIT
  * CONFIG_ARCH_HAS_ILOG2_U32
  * CONFIG_ARCH_HAS_ILOG2_U64
  * CONFIG_ARCH_PHYS_ADDR_T_64BIT
  * CONFIG_ARCH_SUPPORTS_MSI
  * CONFIG_GENERIC_CPU_DEVICES
  * CONFIG_HWMON_DEBUG_CHIP
  * CONFIG_I2C_PXA_PCI
  * CONFIG_LEDS_GPIO
  * CONFIG_MINIX_FS_NATIVE_ENDIAN
  * CONFIG_MLX4_CORE
  * CONFIG_POWER_SUPPLY
  * CONFIG_POWER_SUPPLY_DEBUG
  * CONFIG_QUOTACTL
  * CONFIG_SDIO_UART
  * CONFIG_SENSORS_K10TEMP
  * CONFIG_SENSORS_SCH56XX_COMMON
  * CONFIG_SENSORS_VIA_CPUTEMP
  * CONFIG_SERIO_AMBAKMI
  * CONFIG_SERIO_I8042
  * CONFIG_SERIO_LIBPS2
  * CONFIG_SERIO_PCIPS2
  * CONFIG_SERIO_RAW
  * CONFIG_SERIO_SERPORT
  * CONFIG_SPI_BITBANG
  * CONFIG_SPI_GPIO

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31737 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-15 10:58:52 +00:00
nbd
b6b0015701 x86: refresh config, enable pci express support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24026 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-17 22:41:17 +00:00
jow
2dde856300 [x86] Add OLPC kernel config (patch by Acinonyx) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20517 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-03-27 15:31:19 +00:00
jow
2f6b9047f2 [x86] Remove support for older kernels (patch by Acinonyx) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20515 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-03-27 15:29:22 +00:00
hauke
e2b35b4810 x86: do no overwrite CONFIG_SCSI_LOWLEVEL 
CONFIG_SCSI_LOWLEVEL is needed for some packages.
Backport commit r19759 into kernel 2.6.30


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20340 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-03-21 14:02:30 +00:00
kaloz
0b86ea3caf clean up handling of some kernel symbols 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19581 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-02-11 09:33:16 +00:00
jow
f9d040813d [x86] preinit: use grep -q where applicable 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19479 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-02-01 00:33:34 +00:00
nbd
5b5b4dd41c preinit: Remove Ctrl-C prompt...impossible on /dev/console (patch by cshore) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19367 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-01-28 19:27:49 +00:00
nbd
a9929695c6 add preinit modularization work by Daniel Dickinson (cshore) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19331 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-01-25 17:11:17 +00:00
kaloz
bda513685e some more Kconfig symbol move.. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18371 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-11-11 11:52:41 +00:00
kaloz
5ed0363af9 another round of kernel config cleanups 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18370 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-11-11 11:42:24 +00:00
kaloz
4388c9e2c1 sort all target config files 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18367 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-11-11 09:27:13 +00:00
florian
90c331955e [x86] add olpc 2.6.31 configuration, forward port the block2mtd patch, refresh patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18333 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-11-07 12:32:25 +00:00
florian
bbd135050c [x86] the olpc config that was merged from the olpc port is a 2.6.30 config 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18332 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-11-07 12:16:31 +00:00
florian
ea8823c993 [x86] merge the olpc target with the x86 target, both tested and running 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18279 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-11-03 01:02:39 +00:00