1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-05 18:20:38 +02:00
Commit Graph

165 Commits

Author SHA1 Message Date
kaloz
5cffa2bddb upgrade to newest stable kernel versions
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15575 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-05-03 16:58:06 +00:00
florian
21dcc33bff [brcm47xx] use vmalloc instead of kmalloc when reserving space for the lzma initramfs (#3488)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15534 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-05-01 09:23:31 +00:00
nbd
b47e0c9f48 brcm47xx: remove 2.6.25 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15448 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-27 15:47:46 +00:00
jow
d7bc7f5ba2 [brcm47xx] add nvram to default packages
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15438 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-27 13:00:27 +00:00
nbd
b3938f1ae2 brcm47xx: 2.6.28 was accidentally committed with the old (and conceptually broken) b44 phy fix. replace it with my cleaned up version from 2.6.25 (thx, netprince)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15351 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-23 14:27:16 +00:00
florian
3504fa9368 [brcm47xx] correctly set mapbase while registering the UART (#4622)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15255 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-19 13:43:00 +00:00
florian
c0d1d6df8e [brcm47xx] finally fix boot failures on buffalo devices, tested on WHR-HP-G54 and WRT54GS v1.1 with no side effects (#4061)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15232 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-17 09:22:02 +00:00
florian
6c3a094cb1 [kernel] do not override CONFIG_CONFIGFS_FS in a few places, and make gpiommc be selectable with the spio-gpio-old module (#4659)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15215 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-12 12:54:38 +00:00
nbd
47a4d53758 b44: use netdev_alloc_skb
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15159 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-08 16:57:52 +00:00
hauke
91317965c7 [kernel] update to kernel version 2.6.28.9
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15017 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-24 15:06:53 +00:00
mb
32ce3a3aa7 bcm47xx: Fix compilation on non-PCI configs.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14919 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-17 16:45:23 +00:00
kaloz
1044e166ce update other 2.6.28.7 targets to 2.6.28.8, too
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14917 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-17 12:53:22 +00:00
hauke
90fac27f2a [brcm47xx] refresh patches and configuration
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14722 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-01 20:19:55 +00:00
nbd
b19b9f9e19 nuke some wgt634u specific crap that was introduced upstream
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14619 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-02-22 17:14:28 +00:00
nbd
95246c4c70 disable all kernel config options that are set to =m
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14611 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-02-22 04:44:24 +00:00
hauke
387187ed20 [kernel] update to 2.6.28.7 and 2.6.27.19
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14601 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-02-21 18:53:05 +00:00
markus
ac63a1124d new upstream kernel 2.6.28.6
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14551 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-02-18 17:37:54 +00:00
mb
d04856e7e1 Fix bcm47xx GPIO dirin/dirout API return codes.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14509 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-02-14 20:22:31 +00:00
markus
be11e989ca changed default kernel to 2.6.28.5, it at least runs on
Asus WL-500g Premium.
The earlier version 2.6.28.4 is also running on WRT54G3G
so I don't expect any trouble here.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14501 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-02-13 17:37:57 +00:00
mb
a932888f71 bcm47xx: Implement the remaining parts of PMU init.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14394 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-02-03 18:18:15 +00:00
mb
63da6d7324 bcm47xx: Rename all SSB_PLLRES_ to SSB_PMURES_
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14374 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-02-02 20:04:22 +00:00
mb
79ee2bdad6 bcm47xx: Implement 4312 and part of 4325 PLL init.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14373 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-02-02 20:00:04 +00:00
mb
841d5f442f bcm47xx: Implement the remaining PMU resource inits.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14350 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-02-01 20:20:49 +00:00
mb
9c0ae271fe bcm47xx: Add support for the 5354 PMU.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14347 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-02-01 18:55:36 +00:00
nbd
0d563d0390 b44: fix misalignment and space-saving in rx packet handling (significant throughput and cpu load improvement)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13946 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-01-09 03:06:37 +00:00
nbd
ee47517d9a nuke old 2.6.23 code for brcm47xx
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13910 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-01-06 22:38:38 +00:00
nbd
3b617e51cc add initial 2.6.28 support for brcm47xx target
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13909 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-01-06 22:36:41 +00:00
agb
1846ada5d5 Add hostapd-mini to default images where applicable
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13819 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-01-02 05:12:46 +00:00
florian
c3bcc0c54c Fix the default negotiation to be 10Mbits HD on some devices (#4224)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13610 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-12-12 00:59:47 +00:00
kaloz
45e3fd14e6 move THERMAL symbols into the generic config
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13346 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-11-25 13:52:25 +00:00
juhosg
d8297bb0a4 [kernel] update to 2.6.25.20, 2.6.26.8, 2.6.27.5 and refresh patches
* based on a patch by Hauke Mehrtens
 * closes #4193



git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13192 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-11-12 17:49:01 +00:00
florian
f3c918e2ea Build b43, b43legacy and ath9k for kernels >= 2.6.27 from mac80211. Include b43legacy by default in the Generic bcm47xx profile (#4179)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13164 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-11-09 22:42:36 +00:00
juhosg
94b5af79b4 [kernel] update to 2.6.25.19, and refresh patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13137 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-11-07 08:44:56 +00:00
nbd
66250ce579 turn the wrtsl54gs workaround into a more generic fix and reduce the chance of it introducing any breakage
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13098 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-11-02 23:08:42 +00:00
juhosg
31aa2c05fb [brcm47xx] fix boot failure on some boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13013 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-10-20 06:31:04 +00:00
nbd
79670e1e13 change the way ./files* and the generic kernel files are applied. ./files now applies to *ALL* kernel versions, and is copied along with ./files-* - this gets rid of quite a bit of redundancy in the extra kernel drivers.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13010 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-10-18 21:43:30 +00:00
noz
8bef1323b0 Add workaround for eth0/1 PHY on WRTSL54GS
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@12829 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-10-02 22:22:46 +00:00
agb
014f9c6b03 [ath5k] create a profile for brcm47xx and ixp4xx
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@12744 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-09-27 20:16:16 +00:00
agb
ecf4c24b4e [brcm47xx] make b43 the default profile
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@12743 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-09-27 20:15:51 +00:00
juhosg
151259743b [kernel] update to 2.6.26.5 and 2.6.25.17
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@12718 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-09-26 18:46:53 +00:00
nico
1f74483425 disable CONFIG_USB_SUPPORT in generic config for 2.6.25 & 2.6.26 and enable it on targets where USB is supported
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@12690 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-09-24 19:28:53 +00:00
juhosg
6795275961 [kernel] update to 2.6.26.3 and 2.6.25.16
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@12371 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-08-22 15:37:19 +00:00
juhosg
284a2e1864 [brcm47xx] refresh 2.6.23 patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@12311 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-08-14 18:05:37 +00:00
florian
dc08bcee1a Now we have b43 working in master mode, include b43 in the profile (#3827)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@12301 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-08-13 19:42:07 +00:00
juhosg
9c609b5b3b [kernel] update to 2.6.25.15 and 2.6.26.2
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@12242 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-08-07 16:52:52 +00:00
juhosg
115a129a30 [kernel] update to 2.6.25.12
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11933 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-07-26 10:53:23 +00:00
juhosg
92aeca3157 [brcm47xx] fix compile error (closes #3799)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11907 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-07-22 11:22:41 +00:00
mb
2d2ad6f704 Update gpiommc to use configfs
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11887 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-07-20 19:34:09 +00:00
florian
035919bae2 Disable ubsec ssb by default on WGT634U until it gets fixed
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11846 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-07-16 09:58:52 +00:00
florian
69f7e26c1a Include ubsec ssb in the WGT634U profile
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11842 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-07-15 17:15:58 +00:00
noz
da09093477 [brcm47xx] On embedded devices we must not route the interrupts through the PCI
core, if our host-bus is not PCI
Reported-by: Steve Brown <sbrown@cortland.com>
Signed-off-by: Michael Buesch <mb@bu3sch.d>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11750 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-07-08 17:50:40 +00:00
kaloz
15fb6e6e69 update targets to 2.6.25.10
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11667 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-07-05 16:52:15 +00:00
kaloz
ca231a8331 upgrade to 2.6.25.9
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11584 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-26 14:28:16 +00:00
juhosg
ad91de86f5 [kernel] upgrade to 2.6.25.7, and refresh patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11523 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-17 12:57:04 +00:00
noz
3fe8da738f [brcm47xx] Fix TG3 build. Thanks Hauke Mehrtens
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11510 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-16 19:06:14 +00:00
kaloz
c4019d34c1 upgrade to 2.6.25.6
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11435 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-11 11:38:39 +00:00
noz
8bbd8363d7 [brcm47xx] Update 2.6.25 config
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11349 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-03 21:44:25 +00:00
noz
f6b502aa14 [brcm47xx] Build against 2.6.25.4
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11347 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-03 21:43:20 +00:00
noz
6be2f95016 [brcm47xx] Remove obsolete CFE workaround, now proper fix went in r11275
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11276 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-27 15:08:34 +00:00
florian
d582e58a07 Add a WL500GPv1 profile (#3395)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11243 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-22 20:29:47 +00:00
noz
a909e87720 Revert last 3 commits made in error. Proper versions will come later
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11229 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-20 21:38:04 +00:00
noz
a0c1cebe79 Build brcm47xx against 2.6.25.1
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11228 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-20 21:21:29 +00:00
noz
c9be66008f Update generic-2.6 and brcm47xx 2.6.25 configs
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11227 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-20 21:21:23 +00:00
juhosg
17bba1a8f6 [brcm47xx] refresh kernel patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11200 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-19 08:08:23 +00:00
noz
9a949b5c62 [brcm47xx] Fix kmap_coherent use on 2.6.25 kernels
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11191 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-18 21:31:41 +00:00
juhosg
685d811b38 [kernel] upgrade to latest kernel versions (2.6.25.4; 2.6.24.7; 2.6.23.17; 2.6.22.19)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11184 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-18 20:12:54 +00:00
noz
a11dfce7a2 [generic-2.6] Remove files now present upstream in files-2.6.25
(This is mostly just drivers/ssb and include/linux/ssb)
[brcm47xx] Regenerate patches against 2.6.25.1 kernel+files set
    Default is still to build against 2.6.23.16

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11155 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-16 19:25:20 +00:00
nico
ab01217894 enable proper PCI & USB support detection at config-time by disabling CONFIG_PCI & CONFIG_USB entries in generic/config and enabling them on targets where appropriate
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11097 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-09 17:08:51 +00:00
juhosg
b49b13bfa0 [brcm47xx] fix GENERIC_GPIO support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11004 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-02 07:24:24 +00:00
agb
488de97878 [brcm47xx] Disable CONFIG_CONNECTOR in config-2.6.23
- Unused, disabling precludes Kconfig prompt for CONFIG_W1_CON


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10994 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-01 16:07:29 +00:00
nico
112eacc155 properly disable CONFIG_CRYPTO_HW
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10952 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-04-27 12:31:50 +00:00
noz
320dc1ed40 First step to upgrade of brcm47xx to kernel version 2.6.25
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10939 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-04-25 20:49:40 +00:00
agb
fad87bd3ae Fix b44 phyaddr by applying the PHY-address mask. Closes #3712
- Adapted from patch by Michael Buesch on the linux-netdev mailing list.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10649 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-03-23 04:27:04 +00:00
mb
d1f1e397b9 linux-2.6: Add a driver to run an MMC or SD card over a GPIO based SPI interface.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10637 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-03-21 16:52:27 +00:00
mb
42f7c3889f bcm47xx: Fix warning
arch/mips/bcm947xx/irq.c: In function 'pcibios_map_irq':
arch/mips/bcm947xx/irq.c:78: warning: passing argument 1 of 'pci_name' discards qualifiers from pointer target type


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10626 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-03-19 11:55:31 +00:00
mb
89564986c3 bcm47xx: Register a GPIODEV platform device to allow GPIO access via /dev/gpio
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10623 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-03-19 10:35:56 +00:00
mb
4881d3689d bcm47xx: Fix GPIO data direction output bit assignment
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10605 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-03-15 20:52:02 +00:00
mb
7c19e5386b Update cleanups of ssb-gige
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10597 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-03-13 14:46:27 +00:00
mb
41f07b22f8 SSB-GigE: Fix IRQ routing. This makes the device work. Yay! :)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10532 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-02-28 11:34:36 +00:00
mb
3814202702 Fix the roboswitch code for the WRT350N
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10531 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-02-27 22:35:41 +00:00
mb
90344b92f9 More SSB GigE fixes.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10521 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-02-23 19:07:12 +00:00
mb
371bb6f944 bcm47xx: Add driver for the SSB Gigabit Ethernet core.
It doesn't work, yet, but let's commit what we have.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10509 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-02-20 17:56:24 +00:00
mb
cb3d8ef339 ssb: Fix the horrible crash of innocent cardbus cards.
No Animals were harmed in the production of this patch.



git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10497 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-02-19 16:50:12 +00:00
mb
84296b55ed ssb: Make the GPIO API reentrancy safe.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10496 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-02-19 15:22:17 +00:00
mb
641e19bb65 ssb: Update the GPIO API
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10495 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-02-19 13:52:57 +00:00
mb
4202d050af SSB: Update the watchdog fix to the patch version that will go upstream.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10494 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-02-19 11:58:20 +00:00
mb
ac24192a89 ssb: Move the generic ssb fixes patch to the generic kernel.
This should fix SSB for people using a b43 card on a non-47xx machine.



git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10492 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-02-19 01:43:02 +00:00
mb
e6a5f54f74 ssb: Workaround: Need subsys_initcall to be able to register a PCI bus.
This needs a different fix, but use this workaround for now.



git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10491 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-02-19 01:32:06 +00:00
mb
e6b6adc799 ssb: Update to latest upstream version of ssb.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10490 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-02-19 01:24:18 +00:00
agb
b338f05ee4 Patch for extif watchdog support. Thanks b.sander. Closes #2363 #2814 and #3141
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10489 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-02-19 00:26:12 +00:00
mb
1babd652b4 ssb: Fix serial console on new 47xx devices.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10485 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-02-18 20:41:17 +00:00
mb
f6b242d80b bcm47xx: We can use the ssb-invariants callback now,
as was changed to be called late enough.



git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10476 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-02-17 13:06:45 +00:00
mb
3452d9269b bcm47xx: Remove FIXME
We don't want to move the board time init into SSB. It's just fine as-is. Remove the FIXME.



git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10474 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-02-17 11:59:28 +00:00
mb
2950627303 bcm47xx: Extract all available information from NVRAM into the sprom data structure.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10473 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-02-16 23:35:31 +00:00
mb
c4328f2677 Fix support for PCI devices behind a SSB->PCI bridge.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10468 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-02-16 17:09:50 +00:00
kaloz
41ac39db86 upgrade & standardize kernel versions
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10443 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-02-11 10:50:40 +00:00
nbd
c6e4510d38 add brcm47xx patch by crazy_imp to fix a patch chunk for drivers/Makefile
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10279 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-01-27 14:49:55 +00:00
florian
22825c757c Enable SSB ohci driver (#2828)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9699 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-10 10:14:53 +00:00
florian
9ae7818ff7 Add bcm5354 patches from #2757
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9685 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-09 16:11:52 +00:00
nbd
4f7e54d66e fix wl-700gE ide init (patch by biblbroks, fixes #2686)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9560 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-11-16 03:11:30 +00:00