1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-29 02:56:26 +02:00
Commit Graph

142 Commits

Author SHA1 Message Date
nbd
498cc73e51 fix sysupgrade support for brcm-2.4 and brcm47xx
make mtd refresh based config append optional (leave enabled on x86)

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@12657 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-09-23 11:05:54 +00:00
kaloz
ed7e1fcda4 final fix for BCM5354 USB cores, hopefully
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@12499 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-09-02 11:28:57 +00:00
florian
9a935f099a Package ip6t_limit and ip6t_frag for 2.4 kernels (#3760)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@12276 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-08-11 06:38:48 +00:00
juhosg
2307fc302d [brcm-2.4] fix Dell TrueMobile 2300 v1/v2 detection and network configuration (closes #2788)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11935 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-07-26 16:10:44 +00:00
thepeople
b8eb82f5d3 fix sierra patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11909 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-07-22 15:16:43 +00:00
thepeople
da1c9cf11b This is the Linksys-ported driver from WRT54G3G-ST_v2.00.9_US.tgz,
re-based against 2.4.35 and repaired for obvious breakage (didn't use
its device table, etc.).

Changes from Linksys tree:
 - Remove 'vendor' and 'product' parameters; these aren't used in the
mainstream driver and seem to only have served to break it.
 - Remove bogus 'sierra_device_ids' table, used with above.
 - Changed references to 'sierra_device_ids' back to id_table
 - Changed non-standard CONFIG_USB_SERIAL_SIERRA_3G (line 886) to
current module standard CONFIG_USB_SERIAL_SIERRAWIRELESS
 - Added #include to enable pl2303 hack to remain until I can figure
out if it's still necessary.
Signed-off-by:  RB <aoz.syn@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11899 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-07-21 20:40:14 +00:00
thepeople
81504d5ab6 This series of patches closes the support gap on one of the explicitly
supported platforms (WRT54G3G) by adding direct support for the Sierra
Wireless 3G modems.
Signed-off-by:  RB <aoz.syn@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11898 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-07-21 20:36:16 +00:00
nbd
27e96c3c29 (5/6) bcm57xx: bcm4785 incomplete reboot
I noticed my wrt350n would not reliably reboot after entering
the reboot command.  I found this code in the source for the
wrt600n.  It corrects the problem, and the wrt350n reboots
reliably now.

Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11470 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-15 11:10:43 +00:00
nbd
f833889761 (3/6) bcm57xx: preinit
This patch allows the bcm57xx module to work correctly with failsafe mode.

insmod doesn't return an error when a module loads but doesn't detect a switch.
I added the check_module function to load the module, then make sure
it doesn't just exit immediately.  This allows preinit to only attempt to
load the bcm57xx module when switch-robo and switch-adm dont detect a switch.

The activate_gpio parameter to bcm57xx simply instructs the module to attempt
to activate the switch via gpio before probing for the switch.

Tested on wrt350n.

Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11468 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-15 11:10:13 +00:00
nbd
8d0837caa2 (2/6) bcm57xx: netconfig
Update the netconfig script to support boardtype 0x478.  I've tested this
on the wrt350n, hopefully it will match the 600n as well.

Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11467 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-15 11:09:49 +00:00
noz
0596c05d60 [brcm-2.4 and brcm47xx] Include missing part of r11275. Fix fw_argX from CFE
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11340 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-03 19:29:53 +00:00
noz
60bfafb866 Don't nuke fw_argX from CFE - Thanks jhansen
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11275 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-27 15:01:07 +00:00
juhosg
5591c13267 [brcm-2.4] refresh kernel patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11214 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-19 13:45:06 +00:00
thepeople
8c98e14900 This patch lets netconfig support the asus wl-500w. Signed-off-by: Ben Pfountz <netprince@vt.edu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11070 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-08 01:30:14 +00:00
agb
ed61966d68 Add a generic Broadcom USB profile.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10695 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-03-31 08:05:30 +00:00
agb
9798e364f6 Change WL500gP profile to use uhci-iv (#1589)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10694 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-03-31 08:05:13 +00:00
agb
9325eaaa8c Add support for the WL-500gP v2
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10693 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-03-31 08:04:56 +00:00
nbd
c9d961131c add wrt350n image file
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10205 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-01-16 03:39:59 +00:00
florian
209f76b1df Add back Sitecom WL-105b support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10142 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-01-08 14:27:48 +00:00
nbd
90fba37c49 update brcm-2.4 to 2.4.35.4, integrate new broadcom system code, update broadcom-wl to a contributed version (v4.150.10.5) - no bcm57xx support yet, will follow shortly
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10137 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-01-06 19:28:07 +00:00
kaloz
3d0d2525e7 bump version numbers of Linksys images
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10097 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-01-03 21:28:56 +00:00
florian
8afdee9032 Add bcm5354 patch from #2754
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9684 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-09 15:51:45 +00:00
nbd
2fa2282b6f create broadcom initramfs images and move the lzma decompressor area a bit further
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9556 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-11-16 03:11:17 +00:00
nbd
f56b55940b make the image filenames a bit shorter
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9533 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-11-10 23:08:11 +00:00
nbd
7431c1813f update wrt54g3g pattern version, add wrt54g3g-em pattern (#2663)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9523 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-11-10 15:45:38 +00:00
ryd
aa3d44691c fix missing CONFIG_USB_BLUETOOTH issue
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9494 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-11-03 22:32:54 +00:00
juhosg
7aa11efc17 get rid of per-profile base-files
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9069 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-29 14:27:54 +00:00
juhosg
38e3914d5b [brcm-2.4] fix vlan configuration on Dell TrueMobile 2300
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9015 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-25 08:34:30 +00:00
nico
a8265302c3 refresh brcm-2.4 kconfig
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8949 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-22 15:06:15 +00:00
nbd
de5584e77a clean up jffs2 config options
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8848 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-19 20:58:16 +00:00
florian
c89d2f226c Add preliminary support for sysupgrade on brcm
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8718 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-09 19:18:02 +00:00
nbd
ceee90ffd2 adapt profiles for subtarget changes
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8695 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-08 20:04:43 +00:00
nbd
6db7ad74f6 major target cleanup. it is now possible to have subtargets that can override many target settings, including arch - merge adm5120, adm5120eb. target profiles still need to be adapted for subtargets
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8694 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-08 19:55:42 +00:00
nbd
c8bff13a74 fix pci init for brcm-2.4 with atheros wifi cards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8690 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-08 13:39:34 +00:00
nbd
a8c9d0167e remove some obsolete files
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8654 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-06 16:40:36 +00:00
nbd
17c7b6c3fd strip the kernel version suffix from target directories, except for brcm-2.4 (the -2.4 will be included in the board name here). CONFIG_LINUX_<ver>_<board> becomes CONFIG_TARGET_<board>, same for profiles.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8653 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-06 16:27:37 +00:00
mbm
26be763517 workaround for timer glitch on some boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8483 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-25 13:18:58 +00:00
mbm
c2e9789198 fix wan configuration on wr850g v2/v3
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8482 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-25 12:27:01 +00:00
florian
da62128d18 Add usb-keyspan modules (#2229)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8450 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-21 09:42:25 +00:00
nbd
12c49b6a6a build system cleanup/restructuring as described in http://lists.openwrt.org/pipermail/openwrt-devel/2007-August/001159.html
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8362 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-07 00:04:25 +00:00
nbd
c49b0723e2 add failsafe support for atheros-2.6 (#1501) - only works with ar5315+ at the moment
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7870 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-04 04:35:44 +00:00
nbd
3462ef2525 move parts of the failsafe code to the generic base-files - will be used on atheros as well as soon as i've added support for it
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7810 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-06-30 21:09:02 +00:00
nbd
6a140db132 make the broadcom firmware image code more sane and also fix jffs2-256k related bugs (#1888)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7731 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-06-25 15:36:31 +00:00
nbd
1d5d64e647 fix failsafe on broadcom, send netlink events in diag when running linux 2.6
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7722 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-06-25 08:32:25 +00:00
florian
50795a07db Really apply the esfq patch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7623 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-06-13 19:12:44 +00:00
florian
1cdba29c7d Resync brcm-2.4 kernel config and enable syncookies (#1876)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7622 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-06-13 18:50:51 +00:00
kaloz
e799c14a2d enable image generation for the WRT150N
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7486 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-06-04 09:26:40 +00:00
nbd
74263c7c57 fix pcmcia/pccard build defaults
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7275 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-05-19 16:16:48 +00:00
nbd
0c0407178e Fix broadcom squashfs images:
We switched over to appending the jffs2 eof mark to the squashfs images, 
but since the squashfs is not always aligned to eraseblocksize, the eof
mark landed in the wrong place. This commit adds an extra flag to the
trx utility that can append extra data to a partition with alignment.
This is used to place the jffs2 eof mark at the right offset.



git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7253 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-05-15 18:41:48 +00:00
mbm
3c976d4432 cleanup the broadcom preinit.arch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7176 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-05-10 16:29:15 +00:00