qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-01 13:05:18 +02:00
Code
16,408 Commits 13 Branches 0 Tags 117 MiB
e4bad8dbe6
Commit Graph

291 Commits

Author SHA1 Message Date
Lars-Peter Clausen
1ac22689b8 jz4740: Get rid of unused files. 2009-11-20 19:28:03 +01:00
Xiangfu Liu
df58b94fba disable JFFS2 and SQUASH filesystem 
enable input event for poweroff daemon
 2009-11-21 00:10:17 +08:00
Xiangfu Liu
ac43468371 disable init gpio as uart0 for end user 
in Ben NanoNote uart0 and keyboard use the one same gpio
if init this gpio as uart0. this cause a keyboard bug
 2009-11-20 23:31:30 +08:00
Xiangfu Liu
0f4bab5d6b update u-boot patch use ubifs in BOOTARGS 2009-11-18 23:25:40 +08:00
Xiangfu Liu
92167260ad re-license the board-qi_lb60.c with GPLv2 or later 2009-11-18 10:23:56 +08:00
Lars-Peter Clausen
733ee36727 jz4740: gpio: Emulate EDGE_BOTH irq type. 
The jz4740 only supports EDGE_RISING or EDGE_FALLING. Some drivers need
EDGE_BOTH so we try to emulate it.
 2009-11-16 01:34:50 +01:00
Lars-Peter Clausen
2982c214f6 Add ubifs support. 2009-11-14 20:27:04 +01:00
Lars-Peter Clausen
31ee690d0a u-boot: Disable adc and usb host clock at boot 
Adc clock will be enabled when it's needed and we don't use usbhost.
 2009-11-12 01:40:11 +01:00
Lars-Peter Clausen
0d3b54ed10 gpm940b0: Add suspend/resume support. 2009-11-09 19:32:20 +01:00
Lars-Peter Clausen
92e06e95a5 jz4740: qi_lb60: Allow the power button to wakeup the device from suspend. 2009-11-09 17:56:21 +01:00
Lars-Peter Clausen
213a66582d xburst: Enable gpio buttons driver in config. 
This is required to make the power button work.
 2009-11-09 17:55:22 +01:00
Lars-Peter Clausen
1dd40a2e65 xburst: Enable suspend in config 2009-11-09 17:53:35 +01:00
Lars-Peter Clausen
27ca1adf36 jz4740: Cleanup powermanagemnt code. Add inital suspend support. 2009-11-09 17:47:28 +01:00
Lars-Peter Clausen
12f85f8a91 jz4740: Don't enable all clocks when booting. 
All clocks we need should allready be enabled by the bootloader.
 2009-11-09 01:10:31 +01:00
Lars-Peter Clausen
c9cb830945 u-boot: Disable clocks we don't need 
We might gain a few more minutes battery runtime by this.
 2009-11-09 00:44:26 +01:00
Lars-Peter Clausen
bc0684a065 jz4740: Remove imem and ipu support from proc 
It's not used and wastes 4MB of mem.
 2009-11-09 00:25:34 +01:00
Lars-Peter Clausen
928b8ba548 jz4740: Remove mmc file from proc section 
It does not make sense to keep it threre.
 2009-11-08 23:48:53 +01:00
Lars-Peter Clausen
207ee3b6f5 u-boot: Don't initalize i2c and ssi gpio pins. 
We use neither.
 2009-11-08 23:00:32 +01:00
Xiangfu Liu
1652213e92 [U-BOOT] fix init 2009-10-30 15:44:24 +08:00
Lars-Peter Clausen
44e92dbd5d gpm940b0: Select high driver frequency 
Fixes flicker.
 2009-10-30 02:18:31 +01:00
Xiangfu Liu
6293205a75 font SUN8x16 is better 2009-10-28 03:13:33 +08:00
Xiangfu Liu
d0e8e5dbfc update u-boot patch 
Signed-off-by: Xiangfu Liu <xiangfu@qi-hardware.com>
 2009-10-28 03:13:33 +08:00
JieJing.Zhang
907a34b80e jz_battery: fix bug cause kernel panic. 
all about container_of macro.

Signed-off-by: JieJing.Zhang <kzjeef@gmail.com>
 2009-10-28 03:13:33 +08:00
Xiangfu Liu
110c87a5f7 revert commit: 3dbe390f5347b6c279c9d193445e1c86fbee9894 
those change make kernel panic.
 2009-10-28 03:13:33 +08:00
Xiangfu Liu
8319e34599 fix the jz4740_pcm_mmap function 
now Ben can play online Radio
 2009-10-28 03:13:33 +08:00
Jiejing.Zhang
96b315a920 add disable sound amp while sound not playback. 
This will save power of amp.

Signed-off-by: Jiejing.Zhang <kzjeef@gmail.com>
 2009-10-28 03:13:33 +08:00
Xiangfu Liu
6aec1a06bf change system name form OpenWrt to BenNanoNote 2009-10-28 03:13:32 +08:00
Xiangfu Liu
6abb40220e fix the comma and period key 2009-10-28 03:13:32 +08:00
Xiangfu Liu
fa7ec6d7d6 enable the speaker 2009-10-28 03:13:32 +08:00
Xiangfu Liu
e64a14b4fd enable the sound as default 2009-10-28 03:13:32 +08:00
Xiangfu Liu
3843e5f1af upgrade u-boot to 2009.08 2009-10-28 03:13:32 +08:00
Lars-Peter Clausen
9eff41dbb1 qi_lb60: Initalize nand paritions and ecc layout depending on the chip size. 2009-10-28 03:13:31 +08:00
Lars-Peter Clausen
cc05485408 jz4740_nand: Add ident_callback 
Add ident_callback which is called after the nand chip has been identified and
before it is setup. This can be used by board code to set partition and ecc info
depending on the chip.
 2009-10-28 03:13:31 +08:00
Lars-Peter Clausen
7fa87373a8 mach-jz4740: Move all non generic code from platform.c to board-qi_lb60.c 
platform.c should only contain the generic platform device definitons,
everything board specific should go into the board file.
 2009-10-28 03:13:31 +08:00
Lars-Peter Clausen
5709f560f9 Cleanup qi-lb60 board code. 2009-10-28 03:13:31 +08:00
Lars-Peter Clausen
9c229a412e Remove old ingenic framebuffer drivers. 
I think it's time to get rid of these
 2009-10-28 03:13:31 +08:00
Lars-Peter Clausen
c84ef25bf3 Merge patches into files. 2009-10-28 03:13:31 +08:00
Lars-Peter Clausen
c456866a4a jz4740_fb: Properly initalize physical video memory address 2009-10-28 03:13:31 +08:00
Florian Fainelli
7df7bde3ac refresh xburst patches 2009-10-28 03:13:30 +08:00
Xiangfu Liu
767987c14e cleaup code style 2009-10-28 03:13:30 +08:00
Xiangfu Liu
d89fdafa97 update power button patch 2009-10-28 03:13:30 +08:00
Mirko Vogt
e818ccc989 use the linux kernel version 2.6.31 (final) 2009-10-28 03:13:30 +08:00
Xiangfu Liu
3dde1ac212 code style cleanup jz4740_nand.c 2009-10-28 03:13:30 +08:00
Xiangfu Liu
ce96b1f2a5 remove init WAKEUP in board-qi_lb60 file 2009-10-28 03:13:30 +08:00
Xiangfu Liu
4fc4138e68 add power button driver 2009-10-28 03:13:30 +08:00
Xiangfu Liu
2f3ac925c4 cleanup-gpm940b0-code-style.patch 2009-10-28 03:13:29 +08:00
Xiangfu Liu
1649bbc3d6 make poweroff command work 2009-10-28 03:13:29 +08:00
Xiangfu Liu
71e391515f cleanup modifier keys driver 2009-10-28 03:13:29 +08:00
Mirko Vogt
a1ef81c12e enable ext3 and (v)fat by default 2009-10-28 03:13:29 +08:00
Mirko Vogt
090ea365ad disabled MMC debug output in default config 2009-10-28 03:13:29 +08:00
Mirko Vogt
204259721b do not use default device type <router> as we do not need dnsmasq, ppp, iptables, etc. for now 2009-10-28 03:13:29 +08:00
Mirko Vogt
c2696d65ee use rootwait instead of rootdelay as it is mor dynamic - however there's no delay needed anyway when booting from nand 2009-10-28 03:13:28 +08:00
Jiejing.Zhang
cd0d71a697 jz-battery: improve code. clear static var. 
1. clear static global var, use platform_get_drvdata.
2. check gpio state before register power supply.

Signed-off-by: Jiejing.Zhang <kzjeef@gmail.com>
 2009-10-28 03:13:28 +08:00
Mirko Vogt
45c720faff add base files for 
- assigning IP 192.168.1.1 per default to usb0-interface (usb-ethernet-gadget)
 - add mountpoint for 1st partrition of sd-card - prelimary for testing purposes
 2009-10-28 03:13:28 +08:00
Xiangfu Liu
2b24518947 enable printk_time 2009-10-28 03:13:28 +08:00
Jiejing.Zhang
c91cec083b jz_battery: improve driver code. 
1. put all gobal var to a driver info struct.
2. check gpio before use it.

Signed-off-by: Jiejing.Zhang <kzjeef@gmail.com>
 2009-10-28 03:13:28 +08:00
Lars-Peter Clausen
ae01e2fb2c Add jz4740-adc.h 2009-10-28 03:13:28 +08:00
Lars-Peter Clausen
90dc5a173c jz4740-ac: Fix some small bugs 2009-10-28 03:13:27 +08:00
Lars-Peter Clausen
bdbda932b8 Compile fix jz4740-battery.c, use adc driver and some other minor cleanups. 
Enable adc and battery.
 2009-10-28 03:13:27 +08:00
Lars-Peter Clausen
7a88b927f8 Add jz4740 ADC driver. 2009-10-28 03:13:27 +08:00
Xiangfu Liu
7c9aa25b12 refresh patch 2009-10-28 03:13:27 +08:00
Xiangfu Liu
9e02463e3e add jz4740_batt.h 2009-10-28 03:13:27 +08:00
Xiangfu Liu
9e7f1e7f1a remove the JZ_BAT_XXX_VOLTAGE define 2009-10-28 03:13:27 +08:00
Jiejing.Zhang
5878098ab3 cleanup more about battery gpio and platform data 2009-10-28 03:13:26 +08:00
Lars-Peter Clausen
4c36a20b10 Add jz4740-rtc driver. 2009-10-28 03:13:26 +08:00
Lars-Peter Clausen
9480e0470b jz4740_fb: Add include guards 2009-10-28 03:13:26 +08:00
Xiangfu Liu
65051a9ad5 cleanup-qi_lb60.h 2009-10-28 03:13:26 +08:00
Xiangfu Liu
cd6b976c21 revert the keyboard.c code. just change the defkeymap.map make all keys work 
also the [Euro] [Degree] [Umlaut] work
 2009-10-28 03:13:26 +08:00
Xiangfu Liu
04429a1771 Fn-modifier-keys-work 2009-10-28 03:13:26 +08:00
Lars-Peter Clausen
918f1072ed Remove i2c. 2009-10-28 03:13:26 +08:00
Xiangfu Liu
08996e7e50 add defkeymap.c, fix the CAPSLOCK not work 2009-10-28 03:13:26 +08:00
Lars-Peter Clausen
4230547879 Some build fixes. 2009-10-28 03:13:26 +08:00
Lars-Peter Clausen
daab2fae9a jz4740: More udc cleanup. Enable usb ethernet gadget. 2009-10-28 03:13:25 +08:00
Lars-Peter Clausen
0a70a90d30 jz4740: irq and dma cleanups. 2009-10-28 03:13:25 +08:00
Lars-Peter Clausen
f5d7bb60e5 Add qi lb60 sound soc board driver. 2009-10-28 03:13:25 +08:00
Lars-Peter Clausen
557e48bc8e Some build fixes. 2009-10-28 03:13:25 +08:00
Lars-Peter Clausen
4be762051b Remove 0002-qi_lb60_support_patch. 2009-10-28 03:13:25 +08:00
Lars-Peter Clausen
9b4d9a94d6 Oops... those where missing from commit cbecf6e9f1 2009-10-28 03:13:25 +08:00
Lars-Peter Clausen
8bb63272c3 jz4740 asoc: Add new internel codec driver. 
Add qi lb60 board support.
Remove unneeded files.
 2009-10-28 03:13:25 +08:00
Lars-Peter Clausen
299c9e29ef jz4740: More udc cleanup. Enable usb ethernet gadget. 2009-10-28 03:13:24 +08:00
Lars-Peter Clausen
8c57ef78b6 jz4740: Cleanup Kconfig 2009-10-28 03:13:24 +08:00
Lars-Peter Clausen
fdeff24f83 jz4740: irq and dma cleanups. 2009-10-28 03:13:24 +08:00
Lars-Peter Clausen
d763dfdb80 jz4740_nand: Fix compiler warning 2009-10-28 03:13:24 +08:00
Xiangfu Liu
764fdaf217 unset CONFIG_MMC_BLOCK_BOUNCE make sd card work 
the RedUpPoint combination keys work. [Fn] combination not work
 2009-10-28 03:13:24 +08:00
Lars-Peter Clausen
935e79e5ab More udc cleanup 2009-10-28 03:13:24 +08:00
Lars-Peter Clausen
88f159b443 Cleanup udc driver (a bit). 2009-10-28 03:13:23 +08:00
Xiangfu Liu
055e2e36f7 update cmdline 2009-10-28 03:13:23 +08:00
Xiangfu Liu
89c608c1a0 update cmdline, default boot to nand. u-boot bootdelay set to 0 2009-10-28 03:13:23 +08:00
Mirko Vogt
ee1bee1421 use new display- and fbdriver 2009-10-28 03:13:23 +08:00
Mirko Vogt
c16999abab get rid of obsolete kernel patches and -configs 2009-10-28 03:13:23 +08:00
Mirko Vogt
c64bbe21ab refresh config - use openwrt boot logo 2009-10-28 03:13:22 +08:00
Mirko Vogt
be2beb8dd3 add openwrt boot logo 2009-10-28 03:13:22 +08:00
Mirko Vogt
98d2317905 fix typo 2009-10-28 03:13:22 +08:00
Xiangfu Liu
281d29e9b7 fix the kernel compile error in openwrt 
the patch folder is not correct
 2009-10-28 03:13:22 +08:00
Lars-Peter Clausen
1976b23d08 Set correct color sequnce. 
Add a debug sysfs entry reg which gives direct write access to lcms display
registers.
 2009-10-28 03:13:21 +08:00
Lars-Peter Clausen
3a1ece5ea7 Add lcm driver. 2009-10-28 03:13:21 +08:00
Lars-Peter Clausen
430fba9852 Fix typo. 2009-10-28 03:13:21 +08:00
Lars-Peter Clausen
b8419470a2 Add clock support. Mostly untested. 2009-10-28 03:13:21 +08:00
Xiangfu Liu
fd21fd92e0 make kernel default compile for 2GB NAND flash board 2009-10-28 03:13:21 +08:00
Xiangfu Liu
bdad94fa1a git rebase with master 
fix the patch erro after rebase
 2009-10-28 03:13:21 +08:00
Xiangfu Liu
4c6e0c02ed this option make MMC driver alwasy work when boot 2009-10-28 03:13:20 +08:00
Xiangfu Liu
5b983412c7 add-2gb-nand-support 
Signed-off-by: Xiangfu Liu <xiangfu.z@gmail.com>
 2009-10-28 03:13:20 +08:00
Xiangfu Liu
26795803ce fix a redefine warning, GPIO_PWM defined in board-qi_lb60.c file 
Signed-off-by: Xiangfu Liu <xiangfu.z@gmail.com>
 2009-10-28 03:13:20 +08:00
Xiangfu Liu
701937f9f1 this option make MMC not use DMA, so remove this option 
Signed-off-by: Xiangfu Liu <xiangfu.z@gmail.com>
 2009-10-28 03:13:20 +08:00
Xiangfu Liu
9ac5dc2ca3 try to add lb60 to 2.6.31 kernel 
this is not the work patch.
  just show some work progress.
Signed-off-by: Xiangfu Liu <xiangfu.z@gmail.com>
 2009-10-28 03:13:19 +08:00
Xiangfu Liu
f81c2213a2 add-2.6.24-kernel-patch 
Signed-off-by: Xiangfu Liu <xiangfu.z@gmail.com>
 2009-10-28 03:13:19 +08:00
Mirko Vogt
59095d9f64 Revert "change default baudrate to 115200" 
This reverts commit 03acb399060bc7b9013f3776b8697915389b4592.
 2009-10-28 03:13:18 +08:00
Mirko Vogt
f010e75458 change default baudrate to 115200 2009-10-28 03:13:18 +08:00
Xiangfu Liu
b9ae82b25f split-0002-patch 
Signed-off-by: Xiangfu Liu <xiangfu.z@gmail.com>
 2009-10-28 03:13:18 +08:00
Xiangfu Liu
f5e43476d3 update-kernel-config 
Signed-off-by: Xiangfu Liu <xiangfu.z@gmail.com>
 2009-10-28 03:13:18 +08:00
Xiangfu Liu
81c4391daf [U_BOOT]add-2GB-nand-support.patch 
Signed-off-by: Xiangfu Liu <xiangfu.z@gmail.com>
 2009-10-28 03:13:18 +08:00
Marek Lindner
da2604ac53 [xburst] remove the dash from the filenames 2009-10-28 03:13:17 +08:00
Xiangfu Liu
ee8a609caf fix [SHIFT,CAPSLOCK] key define 
Signed-off-by: Xiangfu Liu <xiangfu.z@gmail.com>
 2009-10-28 03:13:15 +08:00
Lars-Peter Clausen
a66785b06c Add gpio pin definitions and functions to configure a pin as a function pin. 2009-10-28 03:13:15 +08:00
Lars-Peter Clausen
8fbe4ebda0 Enable ubi/ubifs and nand verify writes. 2009-10-28 03:13:15 +08:00
Lars-Peter Clausen
297d16a6ec Aligen framebuffer data at page boundary. 2009-10-28 03:13:15 +08:00
Xiangfu Liu
93a92952e6 update-config-file 
Signed-off-by: Xiangfu Liu <xiangfu.z@gmail.com>
 2009-10-28 03:13:15 +08:00
Xiangfu Liu
20ae439824 fix u-boot eccpos change it to 12 
Signed-off-by: Xiangfu Liu <xiangfu.z@gmail.com>
 2009-10-28 03:13:15 +08:00
Lars-Peter Clausen
e4334246a3 Allocate jffs2 summery buffer with vmalloc. 2009-10-28 03:13:15 +08:00
Lars-Peter Clausen
a65fb5ef2d reserve bad block area in oob data. 2009-10-28 03:13:15 +08:00
Xiangfu Liu
3aa5222095 revert the jzlcd.h configure to fit the patch file. 
remove 51-fb.patch. we have 051-fb.patch.
Signed-off-by: Xiangfu Liu <xiangfu.z@gmail.com>
 2009-10-28 03:13:15 +08:00
Lars-Peter Clausen
35fedaa9e4 Fix some problems in the framebuffer driver. 2009-10-28 03:13:14 +08:00
Lars-Peter Clausen
ebc8c5a149 Add framebuffer driver for the jz4720/jz4740. It's not complete yet but provides 
enough for qi_lb60 support.
 2009-10-28 03:13:14 +08:00
Lars-Peter Clausen
8e033878c9 Add missing irq defintions for gpio, build gpio module and select necessary 
symbols for gpio lib.
 2009-10-28 03:13:14 +08:00
Lars-Peter Clausen
b85721d95f Add matrix keyboard to config. 2009-10-28 03:13:14 +08:00
Lars-Peter Clausen
1cbf56a99d Fix gpio initialisation. 2009-10-28 03:13:14 +08:00
Xiangfu Liu
e20cd0d3eb fix a redefine warning, GPIO_PWM defined in board-qi_lb60.c file 
Signed-off-by: Xiangfu Liu <xiangfu.z@gmail.com>
 2009-10-28 03:13:14 +08:00
Xiangfu Liu
b5904054fb make lcd work in 2.6.31 
fix typo in driver/video/Makefile
   add some option to driver/video/Kconfig
   update the .config file.

Signed-off-by: Xiangfu Liu <xiangfu.z@gmail.com>
 2009-10-28 03:13:14 +08:00
Mirko Vogt
023bdebb28 add config for 2.6.31 - might need some more love 2009-10-28 03:13:14 +08:00
Mirko Vogt
e765a38f5c switch to linux kernel version 2.6.31-rc6 by default as the generic patchset for 2.6.31 went upstream 2009-10-28 03:13:14 +08:00
Xiangfu Liu
f4db617ed0 change the u-boot and kernel image name 
Signed-off-by: Xiangfu Liu <xiangfu.z@gmail.com>
 2009-10-28 03:13:13 +08:00
Xiangfu Liu
bb05897208 make the 2.6.31-rc6 compiled in openwrt. 
*add layer7_2 patch fix the iptables compile error
  *remove the 'sizes.h' include in jz_mmc.c
  *chmod -x jz_mmc.*
  *not make uImage in Makefile, let openwrt do it.

Signed-off-by: Xiangfu Liu <xiangfu.z@gmail.com>
 2009-10-28 03:13:13 +08:00
Xiangfu Liu
10b1e8ca0c cleanup the 2.6.31-rc6 050-nand.patch 200-qi_lb60.patch 
there is repeat code in platform.c file and 050-nand.patch
   make 200-qi_lb60.patch no warning.

Signed-off-by: Xiangfu Liu <xiangfu.z@gmail.com>
 2009-10-28 03:13:13 +08:00
Lars-Peter Clausen
7d446f792e Add 2.6.31 patches and files. 2009-10-28 03:13:13 +08:00
Xiangfu Liu
f58d88c0f1 this option make MMC not use DMA, so remove this option 
Signed-off-by: Xiangfu Liu <xiangfu.z@gmail.com>
 2009-10-28 03:13:13 +08:00
Mirko Vogt
6e1aa6e45c the forgotten one :) 2009-10-28 03:13:13 +08:00
Mirko Vogt
2d3cd80303 drop out all mtd-related changes made by ingenic 2009-10-28 03:13:12 +08:00
Mirko Vogt
c16fafb1df purge out mtd-utils 2009-10-28 03:13:12 +08:00
Mirko Vogt
0fd039053c purge out OSS stuff as it's obsolete, does not compile and isn't worth the time fixing it 2009-10-28 03:13:12 +08:00
Mirko Vogt
8fc6527893 cautious cleanup of ingenic patch 2009-10-28 03:13:12 +08:00
Mirko Vogt
42f21cc2a7 deselect oss stuff as it does not compile - it's obsolete and will be dropped out anyway... 2009-10-28 03:13:12 +08:00
Mirko Vogt
4cd0737e57 add config for linux kernel version 2.6.27 based on the config for 2.6.25 2009-10-28 03:13:11 +08:00
Mirko Vogt
dc3d3f1c49 yet another patchset - 2.6.27 
it's basically also provided by ingenic and nativly based on 2.6.27,
adjusted to fit into the OpenWrt-environment
 2009-10-28 03:13:11 +08:00
Xiangfu Liu
4a72d4b2fe should-use-DMA-in-mmc 
Signed-off-by: Xiangfu Liu <xiangfu.z@gmail.com>
 2009-10-28 03:13:10 +08:00
Xiangfu Liu
aa38f1d23a try to add lb60 to 2.6.31 kernel 
this is not the work patch.
  just show some work progress.
Signed-off-by: Xiangfu Liu <xiangfu.z@gmail.com>
 2009-10-28 03:13:10 +08:00
Xiangfu Liu
f407b215f1 add-2.6.24-kernel-patch 
Signed-off-by: Xiangfu Liu <xiangfu.z@gmail.com>
 2009-10-28 03:13:10 +08:00
Xiangfu Liu
4808ec76e8 add-2.6.24-kernel-patch 
Signed-off-by: Xiangfu Liu <xiangfu.z@gmail.com>
 2009-10-28 03:13:09 +08:00
Mirko Vogt
e6bf784ae0 Revert "change default baudrate to 115200" 
This reverts commit 03acb399060bc7b9013f3776b8697915389b4592.
 2009-10-28 03:13:08 +08:00
Mirko Vogt
880ef14905 ext2 should be built-in to be able having it as rootfs 2009-10-28 03:13:08 +08:00
Mirko Vogt
38be4dace5 change default baudrate to 115200 2009-10-28 03:13:08 +08:00