qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-18 22:26:16 +02:00
Code
25,430 Commits 13 Branches 0 Tags 117 MiB
e52fbd2289
Commit Graph

890 Commits

Author SHA1 Message Date
juhosg
e52fbd2289 ar71xx: don't assign any MII bus device on QCA9558 by default 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34850 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-22 12:12:43 +00:00
juhosg
661316a678 ar71xx: ag71xx: fix mii_bus_dev sanity check 
The mii_bus device is not required if phy_mask is zero.
The driver will use a fixed connection if it is not
specified.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34849 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-22 12:12:41 +00:00
juhosg
5e4cac78d5 ar71xx: ag71xx: don't start/stop built-in switch w/o mii_bus_dev 
Trying to do that causes a NULL pointer dereference:

CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 801d170c, ra == 801d18d4
Oops[#1]:
Cpu 0
$ 0   : 00000000 00000000 00000000 00000001
$ 4   : 00000000 802e6390 ffff8f45 00000001
$ 8   : 804b5360 ffffff80 802f93bc 00000000
$12   : 802f93e8 00000000 00000000 00000000
$16   : 8381aba0 8381aba0 00000000 00000000
$20   : 8295eff0 00000032 80000000 004101b8
$24   : 00000000 777265b0
$28   : 82936000 82937cf0 00420000 801d18d4
Hi    : 00000000
Lo    : 00000001
epc   : 801d170c ar7240sw_reset+0x1c/0x19c
    Tainted: G           O
ra    : 801d18d4 ag71xx_ar7240_start+0x28/0xc0
Status: 1100fc03    KERNEL EXL IE
Cause : 00800008
BadVA : 00000000
PrId  : 00019750 (MIPS 74Kc)
Modules linked in: ath79_wdt ohci_hcd ledtrig_usbdev ledtrig_netdev
nf_nat_irc nf_nat_ftp nf_conntrack_irc nf_conntrack_ftp
 ipt_MASQUERADE iptable_nat nf_nat pppoe xt_conntrack xt_CT xt_NOTRACK
iptable_raw xt_state nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack
ehci_hcd pppox ipt_REJECT xt_TCPMSS xt_LOG xt_comment xt_multiport
xt_mac xt_limit iptable_mangle iptable_filter ip_tables xt_tcpudp x_tab
les ppp_async ppp_generic slhc ath9k(O) ath9k_common(O) ath9k_hw(O)
ath(O) mac80211(O) usbcore usb_common nls_base crc_ccitt cfg80211(O) c
ompat(O) arc4 aes_generic crypto_blkcipher cryptomgr aead crypto_hash
crypto_algapi ledtrig_timer ledtrig_default_on leds_gpio gpio_button
_hotplug(O)
Process netifd (pid: 677, threadinfo=82936000, task=82cbe140, tls=77803750)
Stack : ffffffff 80087900 00000001 82937d74 8381aba0 8381aba0 00000000 00000000
        8295eff0 801d18d4 8295eff0 801fa4a4 00420000 80092158 00000002 8381aba0
        8381a800 00000000 00000080 801cf900 8027e720 00000000 00000000 8009223c
        8381a800 8381a82c 8027e720 00000000 00000000 7f9d14f0 00420000 801ec08c
        8381a800 801ebfb0 33000000 82937e30 00000001 8381a800 00001003 801ec348
        ...
Call Trace:
[<801d170c>] ar7240sw_reset+0x1c/0x19c
[<801d18d4>] ag71xx_ar7240_start+0x28/0xc0
[<801cf900>] ag71xx_open+0x1d0/0x258
[<801ec08c>] __dev_open+0xcc/0x130
[<801ec348>] __dev_change_flags+0xc0/0x160
[<801ec490>] dev_change_flags+0x20/0x6c
[<801ec5c8>] dev_ifsioc+0xec/0x348
[<801ecdb8>] dev_ioctl+0x594/0x67c
[<800ec00c>] do_vfs_ioctl+0x598/0x5ec
[<800ec0b0>] sys_ioctl+0x50/0x90
[<8006a3c4>] stack_done+0x20/0x40
Code: afbf0024  afb40020  afb10014 <8c910000> 00809021  24100104 24130704  8e440000  02002821

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34848 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-22 12:12:40 +00:00
juhosg
e1ab1fcace generic: ar8216: rename cpuport_cfg to port0_cfg in ar8327_platform_data 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34846 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-22 12:12:35 +00:00
juhosg
452fe04a12 ar71xx: add kernel support for the TL-MR3220 v2 
Based on the following patch:
http://patchwork.openwrt.org/patch/3043/

[juhosg:
 - remove custom LED and button arrays
 - use separate machine specific patch
 - update Kconfig]

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34779 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-19 08:50:35 +00:00
juhosg
5c04be0b52 ar71xx: add kernel support for the NETGEAR WNDR4300 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34647 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-12 16:49:49 +00:00
juhosg
6780a0759b ar71xx: add ap91_pci_init_simple helper 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34646 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-12 16:49:48 +00:00
juhosg
c586ec0f29 ar71xx: ar934x_nfc: allow to control DMA data swap via platform data 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34588 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-12-10 10:38:07 +00:00
juhosg
9364d77535 ar71xx: make rb750_nand driver compatible with 3.7 
Also add compatibility patches for the currently
supported kernels.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34279 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-20 16:29:43 +00:00
juhosg
c7120182ad ar71xx: make ar934x_nfc driver compatible with 3.7 
Also add compatibility patches for the currently
supported kernels.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34278 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-20 16:29:42 +00:00
juhosg
5edd92afcd ar71xx: remove buffer verification reference from rb4xx_nand.c 
It is a dead code.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34276 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-20 14:40:22 +00:00
juhosg
6b16d348f4 ar71xx: restore rb4xx kernel partition size to the original value 
The new lzma compressed elf kernel image fits into
that, even on devices with large page NAND chips.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34274 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-20 12:17:45 +00:00
juhosg
2d874a31c7 ar71xx: add kernel support for the RB435G board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34239 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-18 10:18:01 +00:00
juhosg
74491b3b76 ar71xx: update PCI IRQ map for RB4xx devices 
Should fix #12269.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34238 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-18 09:51:04 +00:00
juhosg
c7a8715a9c ar71xx: add kernel support for the OpenMesh MR600 board 
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34231 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-18 09:32:33 +00:00
juhosg
bb2ac88d1e ar71xx: add support for TP-Link TL-WA7510N 
It is mostly the same as TL-WA901N. WLAN and LAN
are working. LAN LED is working. WLAN signal
strength LEDs are not working yet.

http://wiki.openwrt.org/toh/tp-link/tl-wa7510n?s[]=wa7510n

[juhosg:
  - cleanup commit message
  - move non kernel related stuff into separate changes
  - rename and refresh 615-MIPS-ath79-TL-WA7510N-v1-support patch
  - merge WA7510N support into the mach-tl-wa901nd.c file
  - add 3.6 support]

Signed-off-by: Stefan Helmert <helst_listen@aol.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34187 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-13 14:48:00 +00:00
juhosg
5758d2a8ee ar71xx: use gpio_request_one instead of ath79_set_usb_power_gpio 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34087 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-05 13:23:27 +00:00
juhosg
fcc9edafeb ar71xx: don't use the unknown LED on the ZCN-1523-5 board 
According to #12421, GPIO 1 controls the power
output on the unused lines of the LAN2 port.
Remove the LED definition in order to prevent
possible permanent hardware damage.

If someone needs that, the power-out feature can
be controlled via the GPIO sysfs interface.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34076 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-11-04 22:08:54 +00:00
juhosg
a93b2c2dcd ar71xx: fix link speed between AR7242 and AR8327 on the RB750GL/RB751G boards 
The default pll_1000 value had to be changed
in order to make it working.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33993 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-10-29 17:24:30 +00:00
juhosg
ca706d1e01 ar71xx: remove NO_AUTOINCR flag from the NAND drivers 
The flag is not present in 3.6.
Also add compatibility patches for 3.3.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33971 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-10-28 12:21:15 +00:00
juhosg
c0ed64d3dd ar71xx: ag71xx: fix build_skb arguments for 3.6 
Also add a compatibility patch for 3.3

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33969 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-10-27 17:11:06 +00:00
juhosg
1488bdd2d5 ar71xx: add support for the Senao CAP4200AG board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33956 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-10-27 08:55:38 +00:00
juhosg
5751fd8e2a ar71xx: use mtd_read in wrt160nl_part 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33951 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-10-27 07:57:58 +00:00
juhosg
584868a74e ar71xx: use mtd_read in tplinkpart 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33950 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-10-27 07:57:57 +00:00
juhosg
f194083091 ar71xx: rw2458n - fix flash parts 
See #12338. Redwave rw2458 has uboot, not redboot.

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33867 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-10-19 18:32:49 +00:00
juhosg
f2b2ff444e ar71xx: use the ath79_set_ar934x_eth_cfg helper in machine setup routines 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33818 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-10-17 18:27:47 +00:00
juhosg
83c1f2e1ef ar71xx: add a helper function for setting up ETH_CFG register on AR934x 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33817 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-10-17 18:27:45 +00:00
juhosg
fa44661b24 ar71xx: add support for the OpenMesh OM2P-HS board 
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33800 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-10-17 08:26:01 +00:00
juhosg
685e1a417d ar71xx: add support for the TL-WR841N/ND v8 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33621 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-10-04 20:16:03 +00:00
juhosg
6d33dda889 ar71xx: avoid possible NULL pointer dereference in ath79_init_{,local}_mac 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33575 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-27 20:05:42 +00:00
juhosg
417602ac1e ar71xx: automatically find WLAN calibration data on TEW-673GRU 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33539 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-25 12:57:40 +00:00
juhosg
bb4a32bb81 ar71xx: automatically find WLAN calibration data on DIR-825-B1 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33538 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-25 12:57:38 +00:00
juhosg
a7bf55a712 ar71xx: use different machtype and setup for the TL-MR3040 
Should fix #12211. Compile tested only.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33535 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-24 18:45:56 +00:00
juhosg
88d42e3e5a ar71xx: ar934x_nfc: remove unused oob parameter of ar934x_nfc_send_read 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33454 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-17 20:30:55 +00:00
juhosg
52f5b88b84 ar71xx: ar934x_nfc: increase DMA retry count 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33453 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-17 20:30:54 +00:00
juhosg
5c9038f12e ar71xx: ar934x_nfc: optimize READOOB operation on large page devices 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33452 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-17 20:30:53 +00:00
juhosg
56caae5b72 ar71xx: ar934x_nfc: fix RNDOUT operation 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33451 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-17 20:30:51 +00:00
juhosg
5cf642fa6f ar71xx: ar934x_nfc: fix READ{0,1} operation on large page devices 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33450 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-17 20:30:50 +00:00
juhosg
e9a522de9e ar71xx: register the NAND controller device on the RB2011 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33388 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-13 07:26:26 +00:00
juhosg
39bdbbc7fc ar71xx: add device registration code for the AR934x NAND flash controller 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33387 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-13 07:26:25 +00:00
juhosg
ce47c98d07 ar71xx: ar934x_nfc: experimental NAND Flash Controller driver for AR934x 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33385 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-13 07:26:22 +00:00
juhosg
4b7be33ba5 ar71xx: add initial support for RB2011UAS-2HnD 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33349 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-09 14:05:32 +00:00
juhosg
25dbd4639c ar71xx: use routerboot_find_tag to find wlan data offset on RB751 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33348 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-09 14:05:30 +00:00
juhosg
d0d14675bb ar71xx: add RouterBoot related helper routines 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33347 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-09 14:05:28 +00:00
juhosg
4834938a89 ar71xx: define MTD partitions for RB2011 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33345 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-09 14:05:24 +00:00
juhosg
775e69dfac ar71xx: add preliminary support for Mikrotik RB2011L 
This patch adds preliminary support for the Mikrotik RB2011L.
The NAND flash is not yet supported, so only the initramfs
kernel can be used for now.

[juhosg: remove unnecessary PCI/USB related stuff, the board
does not use that, update commit message]

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33344 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-09 14:05:22 +00:00
juhosg
527f8049cd ar71xx: use dynamic clock dividers on the 2nd MDIO of AR934x 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33343 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-09 14:05:20 +00:00
juhosg
c4b6e540e4 ar71xx: add dynamic MDIO clock calculation 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33342 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-09 14:05:17 +00:00
juhosg
3868d762d1 ar71xx: use the RLE library for RB751 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33338 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-08 17:51:56 +00:00
juhosg
311f77fe3e Revert "ar71xx: only allow RGMII mode on the 2nd ethernet MAC of the AR7240" 
That was based on assumptions.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33310 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-08-29 10:37:55 +00:00