d0794e0d35
ramips: raeth: force link down in ramips_phy_stop
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30550 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-15 13:47:52 +00:00
815334db9c
ramips: raeth: serialize ramips_link_adjust calls
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30549 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-15 13:47:50 +00:00
d214321c8c
ramips: raeth: add PHYLIB support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30547 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-15 06:47:12 +00:00
ca06b03a8e
linux-atm: update solos-pci driver to upstream
...
Fixes for the solos-pci driver.
- Corrects calculation of headroom for padding.
- Removes pointless debug messages.
- Expose Bis A and Bis M annex capabilities.
- Expose hardware revision.
Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com >
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30541 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14 20:11:24 +00:00
12ee6100a2
linux-atm: headroom/padding fixes
...
Submitted upstream to netdev by Chas Williams on linux-atm.
Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com >
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30540 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14 20:11:22 +00:00
6aa1eddee7
[lantiq] generate uboot environment data in target
...
With this patch it is possible to generate uboot environment config file
inside lantiq target. Currently it is only supporting GIGASX76X board.
uboot environment config is used by fw_printenv fw_setenv tools.
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net >
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30537 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14 19:07:11 +00:00
f1215ac7aa
[lantiq] fix compile error in previous commit
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30534 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14 19:07:05 +00:00
61b8a7cdc6
[lantiq] Support booting the Speedport W502V using BRN-BOOT.
...
While the disadvantage is less available flash space, it's easy and
safe to flash without opening the device.
Going back to the original firmware is also possible.
This patch add two firmware utilities, mkbrncmdline and mkbrnboot.
mkbrncmdline patches the uncompressed kernel so the registeres a0 to
a3 are initialized and the memory size is passed in.
mkbrnboot takes the lzma compressed kernel and squashfs images and
creates a firmware image that can be flashed using the BRN-BOOT
recovery kernel, which is booted by holding both buttons when
powering up the device and will listen on http://192.168.2.1 .
The firmware file from bin/lantiq/ to use is
openwrt-lantiq-danube-ARV4525PW-BRNDTW502-brnImage
The BRN-BOOT recovery kernel does size-check the image, so if it's
too big to fit into flash it will complain accordingly.
A second patch is needed to make the wired network interface work
since there is no u-boot to pre-initialise it.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de >
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30532 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14 17:48:04 +00:00
d54a0c39e1
ramips: extract eeprom for the PCIe wlan module on the RT-N56U
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30529 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14 17:32:45 +00:00
073aa05f36
ramips: rt3883: enable PCI on the RT-N56U board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30528 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14 17:32:44 +00:00
0dad89e259
ramips: rt3883: add PCI support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30527 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14 17:32:42 +00:00
34acde8e5f
ramips: rt3883: sync 2.6.39 config
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30526 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14 17:32:41 +00:00
5775cc2b9c
ramips: use SoC specific irq.h
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30525 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14 17:32:40 +00:00
13595a7a28
[lantiq] fixes irq locking in ethernet driver
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30522 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14 15:05:58 +00:00
d4d4e1aa21
[lantiq] fixes gpio_export patch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30521 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14 15:05:57 +00:00
f8d8046b51
[ltq-dsl] add annex selection support to ltq_dsl package
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30518 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-14 15:05:49 +00:00
3c97dc485a
ar71xx: add profile and build image for the TP-Link TL-WR842N/ND v1 boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30508 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-13 17:11:58 +00:00
a433c026e5
ar71xx: add model detection for TL-WR842N/ND
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30507 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-13 17:11:57 +00:00
8ac28fce23
[malta] update to 3.2
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30503 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-13 16:05:30 +00:00
3e65a7b3dd
[ar7] fix titan gpio register size
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30502 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-13 16:05:27 +00:00
e95d1bebf7
ramips: rt3883: update package list in the default profile
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30499 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-13 15:18:05 +00:00
2223374185
ramips: add preliminary support for the Asus RT-N56U board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30498 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-13 15:18:04 +00:00
10a983eea1
ramips: raeth: enable MDIO code for RT3883
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30497 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-13 15:18:03 +00:00
07c8d27309
ramips: add preliminary support for the RT3662/RT3883 SoCs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30495 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-13 15:17:59 +00:00
17d0a31e9d
[malta] add support for 3.2
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30492 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-13 12:36:34 +00:00
adf8b5a51f
brcm47xx: deactivate CONFIG_NO_HZ as it seams not to be needed.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30488 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12 22:41:20 +00:00
e1a53dd6b0
brcm47xx: activate config bug to show warnings
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30487 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12 22:40:01 +00:00
71da0d9534
ramips: use GENERIC_{4,8}M image template for WR5123GN
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30483 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12 18:04:47 +00:00
85b1ee0e18
ramips: rt305x: pass MTD partition map to the ALL0256N via cmdline
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30482 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12 18:04:46 +00:00
1b56ff8998
brcm47xx: refresh patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30481 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12 16:45:27 +00:00
6d7798dc01
brcm47xx: update usb driver for brcm47xx.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30480 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12 16:38:10 +00:00
dd584f3173
ramips: add initial support for 3.2
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30476 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12 12:52:14 +00:00
c9a5f3f810
ramips: include 'linux/module.h' in the ramips_spi driver
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30475 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12 12:52:13 +00:00
4c24144f1f
ramips: rt288x: remove per-board physmap_flash_data instances
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30474 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12 12:52:12 +00:00
40c07f37d9
ramips: rt305x: remove per-board physmap_flash_data instances
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30473 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12 12:52:10 +00:00
9701922238
[cns3xxx]: enable another l2 cache errate on newer kernels
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30472 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-12 11:22:08 +00:00
129f9cacb9
ramips: load gpio-polled keys module
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30463 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-11 20:37:34 +00:00
e24fe32095
ramips: remove yet another CONFIG_MTD_PARTITION ifdef
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30462 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-11 19:37:11 +00:00
d33e1ea7fd
ramips: use gpio-keys-polled instead of gpio-buttons
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30461 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-11 19:37:06 +00:00
1e4941a025
[generic/3.3]: add some missing symbols
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30460 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-11 18:38:28 +00:00
baa5c31303
ramips: add MIPS platform file
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30459 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-11 18:16:11 +00:00
8aed6bf98c
generic/2.6.39: refresh patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30458 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-11 18:16:08 +00:00
06d33a010d
[generic/3.3]: refresh patches to -rc3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30456 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-11 17:43:06 +00:00
a6fcd662b4
ramips: add MDIO bus support for RT288X
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30455 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-11 16:49:56 +00:00
c6114b60db
[cns3xxx]: rename 3.1 patches directory as it will be used for newer kernels as well
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30454 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-11 15:59:23 +00:00
63815e7b5d
[cns3xxx]: rename 2.6.39 patches directory
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30453 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-11 15:58:14 +00:00
3613a73356
ramips: fix Belkin F5D8235-v2 VLAN setup
...
Signed-off-by: Roman Yeryomin <roman@advem.lv >
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30452 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-11 15:31:18 +00:00
3120faed8b
ramips: raeth: make debugging messages configurable
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30450 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-11 15:12:10 +00:00
ad0b8c49bf
ramips: raeth: use device pointer in DMA API calls
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30449 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-11 15:12:08 +00:00
5b41176cdc
ramips: raeth: add netdev pointer to private structure
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30448 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-11 15:12:06 +00:00
juhosg
blogic
florian
hauke
kaloz