qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-24 22:06:31 +02:00
Code
10,990 Commits 13 Branches 0 Tags 117 MiB
e9e6238a63
Commit Graph

3957 Commits

Author SHA1 Message Date
nbd
e9e6238a63 compile libnl with -ffunction-sections to make binaries that use genl smaller 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11600 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-06-28 17:55:21 +00:00
nbd
4cf91506a9 x86: don't attempt to compile grub on darwin 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11599 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-06-28 17:54:44 +00:00
blogic
00ced30717 adds rt_tables to files installed by ip ipkg 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11598 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-06-28 17:32:21 +00:00
agb
3c26d69f21 ebtables: Update to 2.0.8-2 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11556 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-06-22 18:41:25 +00:00
agb
37c9225e53 gmp: Update to 4.2.2 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11555 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-06-22 18:41:09 +00:00
agb
a32ddc88ae e2fsprogs: Update to 1.40.11 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11554 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-06-22 18:40:53 +00:00
agb
802b737f1a arptables: Update to 0.0.3-3 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11553 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-06-22 18:40:30 +00:00
florian
fa1ae394e1 Add support for Connexant USB ADSL modemds (#3553) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11549 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-06-21 13:21:49 +00:00
nbd
d472fdeeda upgrade to uci 0.4.4 (fixes a stupid bug, thx Frédéric Moulins) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11548 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-06-20 17:39:56 +00:00
agb
ae1f46d43d [x86] grub: Natively build grub only on x86 linux hosts, cross compile everywhere else. 
- Closes #3560


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11542 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-06-20 01:43:20 +00:00
florian
aebad6eecf Remove the sleep since we delayed bringing up the interface 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11534 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-06-18 17:42:10 +00:00
florian
9b43f9743b Delay bringing up the interface because some cards requires setting the mode before bringing it up (#3541) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11533 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-06-18 17:09:02 +00:00
agb
9fb2c292c4 linux-uvc: Upgrade to revision 215 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11519 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-06-17 05:39:05 +00:00
agb
198aaf2251 [uci] Create $(1)/etc/uci-defaults directory during installation. Thanks Yuji Mano. 
- Fixes the use of CONFIG_UCI_PRECONFIG under git; git does not track empty directories.



git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11517 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-06-17 00:44:10 +00:00
ymano
32f358d6ff Revert previous bad commit r11512 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11513 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-06-16 19:37:00 +00:00
ymano
ed4d6c7f42 Add the PS3 specific utility bl-option, a helper sctipt 
to get and set bootloader options in flash memory.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11512 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-06-16 19:14:13 +00:00
kaloz
5e79b9ecf4 libnl: backport memleak fix 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11500 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-06-16 12:43:16 +00:00
kaloz
0e8494d669 fix libnl compile with older kernels 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11499 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-06-16 12:42:36 +00:00
nbd
097a961229 remove some unused crap 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11472 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-06-15 11:15:35 +00:00
nbd
128434cb23 (6/6) bcm57xx: package 
This is the bcm57xx package.  I have tested default vlan functions,
but I dont have the equipment to test more advanced setups.  The default
vlan setup seems to be working fine.  I also added the activate_gpio
parameter which will make the driver activate the switch via gpio before
probing for it.

I'm not sure which method is best for autoload.  For the wrt350n, I
need the activate_gpio parameter.  But its probably not a good idea
to add that to the autoload file.  On a system without a bcm57xx switch,
isn't it a bad idea to mess with the gpios looking for the switch? Ideally,
wouldn't it be best to load the bcm57xx module from broadcom-diag, after
it has determined which router its on?  I tried using 'request_module' from
there, but had no success.  For now, I am relying on preinit to load
the bcm57xx module with activate_gpio param, after it has failed to load
switch_robo and switch_adm.

Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11471 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-06-15 11:11:28 +00:00
nbd
c848213af9 (4/6) bcm57xx: switch-core.c/switch-robo.c check for port already registered 
This patch prevents switch-robo.c from attempting robo_probe on a port
that is already registered.  robo_probe will adjust kernel reference counts
if it detects a switch on the port.  If this patch wasn't applied, the
wrt350n would hang on reboot, waiting for the network driver reference count
to reach zero indefinitely.

Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11469 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-06-15 11:10:27 +00:00
nbd
7f7d2044e4 (1/6) bcm57xx: init from diag 
I've been working to finish up the bcm57xx module package nbd
posted a few months ago.  I am no expert, just had some spare
time and some motivation.  Here is the background:

https://dev.openwrt.org/ticket/2744

This first patch disables the bcm57xx gpio setup in broadcom-diag.
The switch needs to be initialized by the driver so the driver can
then reset the switch ASAP.  If the switch isn't reset quickly enough,
it will forward packets between the WAN and LAN, which will cause
problems with modems that only allow one mac to access the internet.

Tested on wrt350n.

Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11466 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-06-15 11:09:27 +00:00
noz
f82fc98012 Remove ssb headers from mac80211 to avoid conflict with in-kernel ones 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11462 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-06-13 21:05:26 +00:00
nbd
1257d52114 another patch fix 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11455 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-06-13 08:56:06 +00:00
nbd
ac5eeb4502 fix a small comment 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11454 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-06-13 07:30:21 +00:00
nbd
bc7e8422ca fix ANI and make use of it in all modes except for monitor 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11453 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-06-13 01:51:31 +00:00
blogic
ce0a10b543 make ip-up scripts aware of network settings 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11446 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-06-11 20:03:08 +00:00
blogic
2964b01abc system now knows which timezone it is in 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11445 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-06-11 19:59:16 +00:00
florian
351499a2e6 Add syskonnect yukon2 support (#2568) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11437 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-06-11 15:51:23 +00:00
nbd
4a7c5241be madwifi: remove unnecessary part of the 349-reset.patch, add an ANI fix for future HALs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11409 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-06-09 10:17:36 +00:00
noz
6b106238fd Compilation fix for hostapd with newer mac80211 code. Thanks Hauke Mehrtens. 
Fixes #3501


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11407 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-06-08 20:19:19 +00:00
juhosg
096bb4f920 [package] add button-hotplug driver, will be usable to check status of buttons connected to GPIO lines 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11401 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-06-07 18:25:32 +00:00
nbd
6181dacb72 oops. accidentally committed the wrong patch version 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11395 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-06-07 15:11:21 +00:00
nbd
bfad2b5fea fix madwifi on linux 2.4 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11385 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-06-06 23:53:03 +00:00
blogic
171e1e3acd use default gateway for routes that have no gw specified, Signed off by: Brian J. Murrell 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11380 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-06-06 18:49:23 +00:00
kaloz
44703fc23b add little endian arm wpa_supplicant config file 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11369 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-06-05 17:15:12 +00:00
nbd
d110b89b7b fix sysupgrade 'do_upgrade: not found' error 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11362 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-06-04 23:20:56 +00:00
nbd
adcea7e7fb upgrade uci to 0.4.2 - fixes some escaping and library issues 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11361 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-06-04 22:43:26 +00:00
noz
18233555f4 Update b43 from compat-wireless-2008-05-26 codebase 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11358 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-06-04 19:47:48 +00:00
noz
38f0bdeb17 Update mac80211 to compat-wireless-2008-05-26 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11357 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-06-04 19:47:27 +00:00
noz
91b83af754 Update libnl to compile on and after 2.6.25 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11356 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-06-04 19:45:46 +00:00
thepeople
de911eea1a add wpa-eap uci configs Signed-off-by: David Bird <david@coova.com> 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11355 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-06-04 18:18:58 +00:00
nbd
4c9bbc5dca upgrade uci to 0.4.1 
improves uci.foreach and uci.get_all in the lua binding
no longer records changes for uci set with oldval == newval


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11354 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-06-04 15:28:46 +00:00
nbd
b146590a26 move the uci lua plugin to /usr/lib/lua instead of /usr/lib/lua/5.1 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11353 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-06-04 15:12:44 +00:00
kaloz
fc35f54386 add preliminary Marvell Orion support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11352 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-06-04 13:51:17 +00:00
kaloz
42bda49cb1 refresh madwifi patches using upstream style 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11351 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-06-04 13:16:18 +00:00
nbd
3dd1e79387 update uci to v0.4.0 - improves lua binding 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11348 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-06-03 21:43:32 +00:00
cyrus
1f74b8f896 Updated Dnsmasq to 2.42 (#3498) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11339 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-06-03 15:06:20 +00:00
juhosg
77ac43966f [package] netfilter/iptables: enable IMQ on 2.6.25 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11335 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-06-02 19:46:47 +00:00
florian
76047329b3 We do not need to make the experimental/install-experimental targets starting with 1.4.x version 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11325 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-06-02 11:54:05 +00:00