1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-05 05:49:42 +02:00
Commit Graph

134 Commits

Author SHA1 Message Date
juhosg
d7d76ebff9 rtl8366: make it available on all platforms
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19329 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-25 15:13:38 +00:00
juhosg
1fc2b717c5 kernel: change debounce logic in the gpio-buttons driver
* thanks to Nuno Gonçalves


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19115 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-13 10:18:24 +00:00
nbd
f2e8193802 deduplicate kernel source files from 2.6.30-2.6.32 by moving them to generic files/
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18927 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-12-25 10:34:21 +00:00
nbd
00ebe9d87a rtl8306: manage the wan port as a separate phy device with proper link status reading and autonegotiation - the genphy driver does not handle it properly
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18709 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-12-09 03:25:33 +00:00
nbd
1b18fb38dc ar71xx: make the rtl8306 switch attach to eth0 instead of eth1 on the wrt160nl, fixes wan port detection (#6309)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18699 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-12-08 14:06:18 +00:00
nbd
b9c2e351d5 fix link status detection in various switch drivers
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18698 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-12-08 14:06:09 +00:00
nbd
8bdac63e6f move the updated version (for 2.6.30+) of ar8216/mvswitch to the generic files directory and remove patches for older kernel versions (no longer in use)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17594 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-09-16 12:24:46 +00:00
nbd
1881cb34ec add a driver for rtl8306 switches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17248 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-08-14 00:52:17 +00:00
nbd
71f5d93ef9 ar8216: rename the vlan attribute to enable_vlan to keep it consistent with other drivers
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16770 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-07-11 01:21:01 +00:00
nbd
109963bd6d ar8216: fix transmission of large frames by setting the switch mtu
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16629 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-29 21:54:16 +00:00
nbd
66fc7bca04 ar8216: add delay for page switching to work around register setting corruption. use packet mangling to fix up the vlan for incoming packets (workaround for hardware bug, which renders normal 802.1q support unusable)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16442 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-14 03:32:01 +00:00
nbd
887ce09dca fix a crash in ip175c attribute enumeration
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15506 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-30 13:57:22 +00:00
nbd
681d7f126b Add a driver for Atheros AR8216 switches
Thanks to Vertical Communications, Inc. for providing access to the documentation

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15482 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-29 13:02:41 +00:00
nbd
b645d7df22 swconfig: add a generic switch reset call
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15470 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-28 19:16:17 +00:00
nbd
dfce366310 clean up the ip175c driver some more, add support for setting the pvid and fix querying the phy status
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15308 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-20 21:26:44 +00:00
nbd
52196955df swconfig: add a generic method for setting the port primary vlan id (used for transparently fixing up pvid for untagged port when setting vlan ports)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15307 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-20 21:26:39 +00:00
nbd
fd1e16f560 add IC+ IP175C driver (based on Patrick Horn's driver, see #4050)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15305 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-20 18:57:55 +00:00
nbd
3a49788081 swconfig: treat struct switch_attr as constant
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15302 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-20 18:57:36 +00:00
nbd
18920f62de swconfig: remove old debugging stuff
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15301 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-20 18:57:30 +00:00
agb
35c3e37724 [generic-2.6] files/fs/yaffs2: revert changes in r15242 that break patching on 2.6.28
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15248 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-18 06:29:23 +00:00
nbd
796a9d1091 get rid of $Id$ - it has never helped us and it has broken too many patches ;)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15242 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-17 14:09:46 +00:00
nbd
8e028d3df0 mvswitch: re-enable header mode
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15186 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-10 11:33:49 +00:00
nbd
6623e9fd70 atheros: in later kernels, vlan 0 no longer works as expected, switch to (1,2) instead of (0,1) for lan/wan
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14981 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-22 20:19:23 +00:00
nbd
a285220c58 mvswitch,adm6996: use phy fixups instead of a nonstandard patch for hardware detection
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14977 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-22 20:18:36 +00:00
juhosg
7f86296834 [kernel] generic-2.6: make MyLoader parser compatible with the old partition tables
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14155 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-01-23 11:54:44 +00:00
nbd
346f19f3f1 move linux/switch.h to generic files/ instead of the kernel version specific directories
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13649 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-12-15 13:04:15 +00:00
juhosg
040727ff39 [kernel] add NP25G and WP543 board id
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13316 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-11-22 19:40:11 +00:00
juhosg
25a958e9bf [kernel] ocf: move all stuff into files, and fix build error on .25
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13288 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-11-19 12:25:39 +00:00
juhosg
28e6c72f66 [adm5120] move MyLoader partition parser into generic files, will be used on ar71xx
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13256 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-11-17 10:14:58 +00:00
juhosg
939db4d35a [ar71xx] move MyLoader stuff into generic files, will be used on adm5120
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13254 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-11-17 09:19:27 +00:00
nbd
594d20c1a4 improve routing/nat performance for devices using the marvell 88e6060 switch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13060 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-10-28 17:54:22 +00:00
nbd
0008c16f33 remove more redundant files and clone files-2.6.23 for 2.6.24 - fixes rdc build errors
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13022 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-10-22 06:51:06 +00:00
nbd
79670e1e13 change the way ./files* and the generic kernel files are applied. ./files now applies to *ALL* kernel versions, and is copied along with ./files-* - this gets rid of quite a bit of redundancy in the extra kernel drivers.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13010 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-10-18 21:43:30 +00:00
juhosg
3e7cd682f4 [kernel] make gpio_dev compatible with GPIOLIB & GPIO_SYSFS (closes #4016)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@12864 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-10-05 13:08:12 +00:00
juhosg
677508fba0 [kernel] modules/gpio_dev: move to drivers/char/ on older kernels as well, and create a package for it
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@12133 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-08-05 09:52:23 +00:00
blogic
d29ad00711 makes ledtrignetdev work on .26 and fix whitespaces
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@12090 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-08-04 14:05:04 +00:00
nbd
2b0ba098c0 add missing defines for mvswitch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11895 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-07-21 18:12:38 +00:00
nbd
1274eb90e0 some more mvswitch fixes:
- initialize the vlan destination map properly
- workaround for moving node bug: clear the ATU database on every PHY poll


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11881 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-07-19 23:09:56 +00:00
nbd
15333144ce add extra safety for the packet mangling in the mvswitch driver
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11880 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-07-19 23:09:43 +00:00
juhosg
7bf7027431 [kernel] generic-2.6: revert yaffs changes [11378], the new code is not working correctly on RouterBoards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11427 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-10 08:20:19 +00:00
nbd
523804cb7c set marvell switch ATU ageing time to minimum instead of maximum - hopefully fixes some fonera 2.0 ethernet issues
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11410 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-09 10:31:46 +00:00
juhosg
da7797b2ca [kernel] generic-2.6: sync yaffs code with the official CVS tree
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11378 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-06 12:52:39 +00:00
juhosg
512f1628d2 [kernel] nuke trailing whitespaces in the yaffs code
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11277 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-28 07:31:26 +00:00
noz
0b6dc7f4b8 Remove bogus zero-length ohci-ssb.c in generic-2.6/files
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11190 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-18 20:55:06 +00:00
nbd
b84c7cd55b enable a different pseudo-vlan mode in the marvell switch (uses a proprietary header instead of a proprietary trailer) - fixes some mtu issues
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10975 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-04-29 12:55:44 +00:00
nbd
0f2df09b10 allow bigger packets in the marvell switch (does not fix the mtu problems yet)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10970 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-04-28 21:59:06 +00:00
nbd
7bd818a6e3 fix vlan mapping for cpu port on the marvell switch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10934 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-04-24 01:09:47 +00:00
nbd
f12451cca6 clear VLANTunnel bit on the marvell switch ports - should help with some bridging issues
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10931 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-04-23 16:28:05 +00:00
nbd
79f8984b04 Add support for the ultra-crappy Marvell 88E6060, which is used in Fonera+ and the upcoming Fonera 2.0
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10876 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-04-20 08:29:01 +00:00
nbd
6598df69d1 Add stub driver for ADM6996F switches (configured through MII)
The driver currently uses a hardcoded VLAN mapping and has no configuration yet
Tested on Accton MR3202a


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10869 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-04-20 02:53:04 +00:00
juhosg
3e6a0c14b4 [package] move spi_gpio driver into the kernel, clean-up SPI modules
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10844 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-04-15 07:33:43 +00:00
juhosg
33af3e23b0 [kernel] modules/gpio-buttons: fix build error on older kernels
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10771 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-04-08 11:49:22 +00:00
mb
c19a584c44 ssb-mips: Fix IRQ routing on the MIPS core.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10770 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-04-08 09:15:53 +00:00
juhosg
c874812690 [kernel] add a polled GPIO buttons input driver
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10766 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-04-07 19:54:44 +00:00
mb
bad75cb0eb GPIODEV: Fix open-count race condition.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10625 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-03-19 11:32:08 +00:00
blogic
dc2f3c0139 add new led trigger for network traffic, fixes #2776
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10566 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-03-07 21:25:02 +00:00
mb
e6b6adc799 ssb: Update to latest upstream version of ssb.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10490 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-02-19 01:24:18 +00:00
mb
bdf17f190b b43: Make probing of NPHY devices possible.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10487 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-02-18 22:21:29 +00:00
nbd
00158ccffe "default-on" LED Trigger
The current LED subsystem always initialises LEDs in the OFF state. This is fine for most LEDs but some should be on right from boot (e.g. POWER LED). Following some discussion with the LED subsystem maintainers, a trigger was recommended as the best way to implement this functionality.

Here is a patch to add a new trigger "default-on" which will initialise an LED in the ON state. It is not compiled by default.

Particular thanks to Rod Whitby for all his help with this.

Signed-off-by: Nick Forbes <nick.forbes@incepta.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10348 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-02-02 01:21:54 +00:00
blogic
ab09debb66 add userspace tool for gpio_dev
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10267 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-01-26 04:24:05 +00:00
blogic
adeafa7cfb add missing header file
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10265 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-01-26 03:52:11 +00:00
blogic
01721535f2 remove binary file
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10262 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-01-26 03:17:35 +00:00
blogic
57f5643ac3 add generic gpio char dev for CONFIG_GENERIC_GPIO archs
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10261 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-01-26 03:16:11 +00:00
nbd
64f4da969a LED driver for PCEngines ALIX boards
This patch adds a driver for the three LEDs that exists on the
PCEngines ALIX 2 and 3 series boards.

The driver is also added to the Alix profile.

Signed-off-by: Petr Liebman <petrliebman@gmail.com>

--


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9748 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-14 00:52:15 +00:00
florian
95b3525348 Forgot removing that file while applying patch from #2757
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9690 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-09 17:52:27 +00:00
juhosg
34047fa1ae make morse LED trigger available as a package, and fix it to compile with 2.6.23
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9363 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-10-20 14:32:13 +00:00
nbd
532249b507 sync ssb with upstream
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9302 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-10-14 02:47:36 +00:00
nbd
50288c1764 back out change to generic-2.6/files/ and update 310-ssb_pcicore_fixes.patch for 2.6.23
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9281 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-10-13 02:21:24 +00:00
nbd
769ee01960 add patches for 2.6.23 on brcm47xx (not enabled yet)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9279 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-10-13 02:04:37 +00:00
juhosg
9946e7c91f [kernel] update yaffs2 to compile with 2.6.23
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9257 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-10-11 07:36:21 +00:00
juhosg
ea9f57570d [kernel] restore CVS Id strings for yaffs code, remove svn:keywords properties
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9250 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-10-10 19:33:22 +00:00
juhosg
b78fbb9510 [kernel] dissect yaffs patch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9249 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-10-10 18:05:48 +00:00
juhosg
b7a77f6732 add missing file from [9055]
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9056 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-28 20:08:55 +00:00
noz
5939035634 Move SSB out of brcm47xx target into generic-2.6 target
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7844 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-07-01 22:44:05 +00:00
mbm
ebef185c93 forgot a file in [7158]
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7161 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-05-10 09:55:23 +00:00
florian
a9d604c520 Limit the number of hotplug childrens
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6804 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-04-01 18:30:32 +00:00
nbd
203cccc4a2 nuke mdev and replace it with hotplug2 :)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6512 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-03-04 20:31:53 +00:00
kaloz
130f4efa38 R.I.P. devfs
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6478 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-03-03 20:35:01 +00:00
groz
86c3fa5f01 Add devpts mounts
git-svn-id: svn://svn.openwrt.org/openwrt/branches/buildroot-ng/openwrt@4612 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-08-20 05:32:43 +00:00
groz
b2afe21618 Update init to use /etc/banner for presence test, remove postinit
git-svn-id: svn://svn.openwrt.org/openwrt/branches/buildroot-ng/openwrt@4604 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-08-18 22:37:40 +00:00
groz
3965ba8cd5 File I forgot
git-svn-id: svn://svn.openwrt.org/openwrt/branches/buildroot-ng/openwrt@4600 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-08-18 19:36:22 +00:00
groz
b694d99910 Flesh out early userspace for initramfs to allow booting from media
git-svn-id: svn://svn.openwrt.org/openwrt/branches/buildroot-ng/openwrt@4592 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-08-18 12:40:47 +00:00
nbd
83df651a86 remove old junk
git-svn-id: svn://svn.openwrt.org/openwrt/branches/buildroot-ng/openwrt@3952 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-06-15 17:22:17 +00:00
nbd
9f1c460264 make ramdisk support generic, some cleanups
git-svn-id: svn://svn.openwrt.org/openwrt/branches/buildroot-ng/openwrt@3911 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-06-07 23:59:04 +00:00