1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-01 10:41:53 +02:00
Commit Graph

120 Commits

Author SHA1 Message Date
juhosg
75a6204e74 base-files: add support for the morse LED trigger
Write "delay" and "message" options to their respective files,
allowing Morse code message configuration through UCI.
The delay (dit length) defaults to 150ms (about 8 words per minute,
suitable for beginners).

Signed-off-by: Petr Viktorin <encukou@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34380 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-11-25 17:20:49 +00:00
florian
8bbe39a23a [package] base-files: skip LEDs handled by rssileds in led init-script
Without this, /etc/init.d/led will try to set the non-existing 'rssi' trigger.
This doesn't harm as the kernel will refuse this setting, but it outputs some
ugly log-lines:
Jun 24 10:15:19 OpenWrt user.info sysinit: setting up led RSSILOW
Jun 24 10:15:19 OpenWrt user.info sysinit: sh: write error: Invalid argument
...

In order to avoid this, skip LEDs with trigger = "rssi" in /etc/init.d/led

Signed-off-by: Daniel Golle <dgolle@allnet.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33717 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-11 06:45:02 +00:00
florian
c19f75663a [package] base-files: release an attached loop device on umounting
Signed-off-by: Michael Heimpold <mhei@heimpold.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33477 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-19 15:13:44 +00:00
jow
aa44be4505 [package] /etc/functions.sh => /lib/functions.sh
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32062 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-05 16:04:23 +00:00
jogo
b8a14b9359 base-files: wait for wifi modules to settle
On slower devices wifi drivers might take too long for detecting
devices, resulting in the wifi detect call not seeing them.

This was observed on a bcm6348 with bcm4318 wifi. Adding a one second
pause was enough for b43 to expose the device.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31639 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-06 21:25:42 +00:00
jow
cff1bc811e enable ntpd server for busybox
hi

Another version, in this one the enable_server option is in the timeserver ntp part of the "system" config file
You can patch trunk and bacfire (tested both)
You can put busybox ntpd in client mode (if you put server), in client & server (by putting enable_server to 1, ntpd listen to udp 123), and also in server mode only (if you didn't put any servers in the config and still put enable_server 1,  ntpd will answer with the time of the router)

I've replaced "config_foreach getpeers timeserver" with "config_get peers ntp server" because we want ntp timeserver, not random ones (to pre-answer if someone want to say that it's intrusive ...)

 Signed-off-by: Etienne CHAMPETIER <etienne.champetier@free.fr>

Le 27/03/2012 20:41, Etienne Champetier a écrit :
> I've now tested my trunk patch and it works fine
> But I still can't find were $PROG is defined (is this a mistake, or some sort of built in variable???)
> (I've made some grep and nothing)
>
> Le 23/03/2012 02:19, Philip Prindeville a écrit :
>> Maybe:
>>
>> [ -n "$PROG" -a -x "$PROG" ] || return 1
>>
>> instead?
>>
>>
>> On 3/22/12 4:34 PM, Etienne Champetier wrote:
>>> Hi
>>>
>>> The 2 attached patchs (trunk & bacfire) add busybox ntpd enable_server option, as busybox ntpd server is compiled by default.
>>> We only need 1 client/server daemon (olipro patch was launching 2 daemons)
>>> I've fully tested the bacfire patch, and as i don't have a running openwrt trunk i'm not sure for the trunk patch (i'm sure about my modifications, but i'm not sure about "[ -x $PROG ] || return 1", as "$PROG" isn't defined ?!)
>>>
>>> Signed-off-by: Etienne CHAMPETIER <etienne.champetier@free.fr>
>>>
>>>
>>> Le 16/01/2012 01:57, Philip Prindeville a écrit :
>>>> On 1/14/12 11:37 AM, Olipro wrote:
>>>>> On Saturday 14 Jan 2012 02:45:59 Philip Prindeville wrote:
>>>>>> Don't we already have a 'disabled' option?  Now we're adding an
>>>>>> 'enable_server' option?
>>>>>>
>>>>>> That seems confusing for no useful reason.
>>>>>>
>>>>> have you bothered to read what I originally wrote? your response would make
>>>>> me inclined to believe that you didn't.
>>>>>
>>>>> currently the ntpd initscript only runs it as a CLIENT - this patch enables
>>>>> you to have one instance running as a client and another as a SERVER that
>>>>> other hosts can synchronise with.
>>>>>
>>>>> Or perhaps I'm misunderstanding, what would you propose for allowing the
>>>>> built-in busybox ntpd to be utilised as a server? a separate init script
>>>>> entirely perhaps?
>>>> Or separate config sections... instead of 'config ntp' have 'config ntp-server' and 'config ntp-client'.
>>>>
>>>> -Philip
>>>>
>>>>
>>>> _______________________________________________
>>>> openwrt-devel mailing list
>>>> openwrt-devel@lists.openwrt.org
>>>> https://lists.openwrt.org/mailman/listinfo/openwrt-devel
>> _______________________________________________
>> openwrt-devel mailing list
>> openwrt-devel@lists.openwrt.org
>> https://lists.openwrt.org/mailman/listinfo/openwrt-devel
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel@lists.openwrt.org
> https://lists.openwrt.org/mailman/listinfo/openwrt-devel

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31374 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-20 15:05:38 +00:00
nbd
4a8df0b661 base-files: remove old coldplugging hacks that are no longer necessary since the new main hotplug2 instance calls udevtrigger as well
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30916 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-13 09:18:30 +00:00
nbd
cbe4e8a6e6 base-files: the initial hotplug2 instance sometimes misses a few relevant events, e.g. during module load. rerun udevtrigger for the final hotplug2 instance to fix this
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29862 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-22 21:14:22 +00:00
jow
d6527e188b [package] base-files: do not pass --set-worker /lib/hotplug2/worker_fork.so to hotplug2 anymore, its statically linked - patch by Viktar Palstsiuk <viktar.palstsiuk@promwad.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29806 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-19 15:37:47 +00:00
juhosg
ca385d45a3 package/base-files: add support for the switch LED trigger
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29629 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-31 15:02:35 +00:00
juhosg
4c27fd2675 package/base-files: use case statement in led init script
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29628 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-31 15:02:32 +00:00
jow
e9531fc3c0 [package] base-files: now that we have date -k, adjust the kernel timezone after setting up TZ and localtime
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29204 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-17 01:18:22 +00:00
nico
f3e5707f9a package/base-files: use new service wrapper
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28835 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-07 22:58:34 +00:00
nbd
a296f5fbac base-files: load modules early, run wifi detect afterwards and only then process uci defaults
this allows uci-defaults scripts to override wifi settings

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28733 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-03 20:02:25 +00:00
jow
f8b2067e09 [package] base-files: remove rdate integration, add busybox ntpd init script and server list in /etc/config/system
The rdate applet proved to be too unreliable to obtain the current time on boot:
	- public time servers are rare and often unreachable or overloaded
	- rdate does not daemonize, it needs a network connection the moment it is started, leading to race conditions
	- the /etc/config/timeserver configuration is overly complex and there is no reliable way to disable rdate invocations
	- the time protocol as specified in RFC 868 is considered obsolete
This commit adds an init script /etc/init.d/sysntpd which starts and stops the busybox ntpd accordingly.
The builtin ntpd can be disabled by either disabling the init script, removing the symlink to busybox or
by clearing the timeserver list in /etc/config/system.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28612 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-27 00:21:53 +00:00
nbd
032074b799 base-files: move network related scripts to a separate package to make the transition to netifd easier
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28495 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-20 15:01:06 +00:00
jow
f5b7b031f5 [package] base-files: use "zonename" system option to symlink /etc/localtime via /tmp/localtime to /usr/share/zoneinfo for glibc and eglibc
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28306 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-09-26 02:28:04 +00:00
jow
56801fec4e [package] base-files: pass conloglevel to syslogd (#9463, #9647)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27400 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-03 15:11:58 +00:00
nbd
7c8a20940f base-files: do not write to /etc/config/wireless at boot time unless a new interface was found
eliminates unnecessary flash write cycles at every boot

patch by Peter Wagner (tripolar)

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27127 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-07 17:00:43 +00:00
jow
6f14855dac [package] base-files: retrigger usb coldplug after module loading, solves usb_modeswitch on boot and possibly others (#9352)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26848 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-08 10:25:58 +00:00
acinonyx
f6d755eda4 [package] base-files: Use -h instead of deprecated -L for symlink check
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26485 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-05 15:09:43 +00:00
acinonyx
fdf5c18152 [package] base-files: fix minor problem in init.d/boot
The script tests for the existance of /dev/root with test -e which fails if
/dev/root is a dangling symlink making the call to ln fail.

Signed-off-by: Justus Winter <4winter@informatik.uni-hamburg.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26483 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-05 15:09:32 +00:00
acinonyx
898495ff41 [package] base-files: Autodetect newly added wireless hardware
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26166 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-03-15 00:44:15 +00:00
florian
220dd05b3c [package] base-files: support port_state in led config (#6763)
Signed-off-by: Alexey Torkhov <atorkhov@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25172 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-27 21:49:46 +00:00
juhosg
25156f20f7 base-files: add support for the usbdev LED trigger
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24647 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-17 17:10:14 +00:00
jow
526fb3c824 [package] base-files: respect .auto option when running coldplug_interface_*() hooks on boot
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21588 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-27 23:04:56 +00:00
jow
ee56eec69c [package] base-files: add a coldplug_interface_* hook to bring up non-hotpluggable interfaces on boot
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21389 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-06 19:50:22 +00:00
acinonyx
4ca110a5a3 [package] base-files: Remove redundant stopping of watchdog
busybox watchdog applet should stop the watchdog before shutting down

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21341 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-03 10:56:58 +00:00
florian
8e61b43b86 [package] add stop() to watchdog init script, patch from Yury Polyanskiy
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21334 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-05-03 09:05:35 +00:00
florian
e47ea57307 Fix bug in foregrounding in /etc/init.d/rcS
Not using the config_xxx functions correctly.  Amended.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20928 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-16 18:14:08 +00:00
florian
04c9400934 [package] option to allow boot to run to completion before starting shell
Setting the system variable "foreground" to yes causes the system to run
the init scripts in series and wait for completion.

This is useful if (a) you don't want the user getting into the console
until the system is initialized, or (b) you have things going on in your
scripts that require strict ordering (and no possible race conditions).

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20841 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-13 19:57:25 +00:00
jow
c07af08426 [package] base-files: also regenerate wifi config if existing config contains only whitespace
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20669 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-03 13:31:59 +00:00
nbd
6e3fb9dc77 base-files: reload switch settings on /etc/init.d/network start as well
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20232 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-03-15 14:02:49 +00:00
nbd
faf7173b4d add the block-mount package by Daniel Dickinson (cshore), replacing existing automount functionality
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19877 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-26 22:45:39 +00:00
lars
ab8bd8a6bd [base-files] Don't do lazy unmounting of filessystems at reboot/poweroff.
It is unneeded and could couse a broken filesystem if unmounting takes to long.
Thanks to Peter Wagner


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19568 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-09 18:07:36 +00:00
nbd
fdf15c4817 when rebooting, use lazy umounts as fallback (patch by puchu)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19429 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-30 18:17:57 +00:00
nbd
29cfba65a4 stop syslogd before rebooting, otherwise umount might not work properly when logging to a file (thx, puchu)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19428 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-30 18:17:52 +00:00
nbd
520eba9de8 when rebooting, stop the network interfaces last (just before umount) to allow services to shut down properly (thx, puchu)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19427 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-30 18:17:48 +00:00
nbd
01eb768093 base-files: do not warn about nonexistant sysctl overrides (some of them are config dependent)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19375 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-29 02:17:11 +00:00
nbd
ae83c51a2e run led init after /etc/init.d/done to keep the configured led settings active after the system has finished booting
Signed-off-by: Nuno Goncalves <nunojpg@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19050 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-06 02:34:20 +00:00
nbd
daa59b7513 do not start multiple subshells for applying /etc/uci-defaults. use sh -x for hush compatibility
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18717 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-12-09 15:15:25 +00:00
nbd
5362dd1b5a mount debugfs by default
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18502 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-11-23 20:35:05 +00:00
jow
11adc3d3d9 [package] base-files: only try to execute watchdog if binary is present
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18102 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-10-20 17:07:08 +00:00
jow
f4a0466de8 [package] base-files: introduce a ready-to-use /etc/rc.local to let users run custom commands on init without creating custom init scripts
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17571 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-09-11 21:35:03 +00:00
nbd
7f2d4d8bb1 Revert "fix nonhotpluggable networks not being brought up. Closes #2781" (r17527) until we've solved the race conditions it creates
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17544 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-09-09 00:16:55 +00:00
thepeople
943fc97fb0 fix nonhotpluggable networks not being brought up. Closes #2781
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17527 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-09-06 17:02:14 +00:00
nbd
7252622410 Revert "add ifup -a to boot(), closes #4543 #2781" (r17515)
Hotpluggable interfaces are already brought up before /etc/init.d/network boot
and this change can break them, if the ifup -a command runs at the wrong time,
also starts many interfaces twice, which can lead to issues with PPPoE.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17516 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-09-05 13:05:59 +00:00
thepeople
412b70da5e add ifup -a to boot(), closes #4543 #2781
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17515 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-09-05 05:33:23 +00:00
thepeople
a7ad6546ea extend logging functions
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17514 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-09-04 21:09:13 +00:00
nbd
e4895b7178 base-files: clean up init.d/fstab and port it to the new config_get
... also remove the unused noauto variable in swapon.

Signed-off-by: Malte S. Stretz <mss@apache.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17159 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-08-07 00:08:01 +00:00