qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-23 09:12:25 +02:00
Code
18,846 Commits 13 Branches 0 Tags 117 MiB
fd4246150d
Commit Graph

122 Commits

Author SHA1 Message Date
juhosg
808a6ab903 ramips: Allow ethernet interface to be taken down and up again 
Taking the ramips ethernet interface down and up again resulted in the
driver not receiving any frames anymore. Fix this by correctly disabling
interrupts in the hw on ifdown.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23243 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-10-05 14:10:34 +00:00
juhosg
1a883422c6 ramips: Ralink RT305x, support for Prolink PWH2004 (Abocom5205) 
The attached patch adds a preliminary support for Prolink PWH2004 board
(Ralink RT305x based). LAN and flash appear to work. However, the USB
port and WLAN I have not managed to activate properly yet, but that
problem appears to be present with other rt305x targets as well(?).

Signed-off-by: Esa Hyytia <esa at netlab.tkk.fi>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23129 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-27 14:43:34 +00:00
juhosg
ef0f04cf25 ramips: add support for Sparklan WCR-150GN board 
This patch adds support for Sparklan WCR-150GN board.
Network configuration should be tweaked to make it work fully. The
reason it's not in this patch is that ramips target should be modified
to support different /etc/config/network files for different boards.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22658 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-08-15 09:43:07 +00:00
juhosg
7b74a280aa ramips: register ethernet device on the RT-N15 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22213 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-07-15 19:45:46 +00:00
juhosg
4c2865eceb ramips: add generic ethernet device for the RT288x 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22212 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-07-15 19:45:43 +00:00
juhosg
12e2f4aadf ramips: add mdio_cfg configuration for the ethernet driver 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22211 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-07-15 19:45:40 +00:00
juhosg
fa4dd3d5de ramips: Fix bridging in ramips ethernet driver 
Bridging between the ramips ethernet driver and rt2800pci was somewhat
broken. Frames received by the ethernet driver which were passed to the
wifi driver for transmission were sometimes corrupted or sent out with
huge delays.

The reason for this is the missing assignment of skb->tail in the ramips
ethernet driver's rx path resulting in skb->tail pointing to skb->data.
Since skb->tail is used by mac80211 it writes into skb->data which messes
up the frames content.

Fix this by using skb_put to correctly set skb->len and skb->tail.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22172 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-07-13 16:52:07 +00:00
juhosg
675367fe81 ramips: protect GPIO register access with a spinlock 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22171 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-07-13 16:52:04 +00:00
blogic
18cc5a3810 Fix ramips build when CONFIG_RALINK_DEV_GPIO_BUTTONS is not set. 
Signed-off-by: Helmut Schaa



git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21643 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-05-31 11:57:32 +00:00
juhosg
47cea815ee ramips: merge slab patch 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21607 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-05-28 19:45:28 +00:00
juhosg
3ab0d99857 ramips: use COMMAND_LINE_SIZE directly 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21606 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-05-28 19:45:24 +00:00
juhosg
3e39b51297 ramips: use KEY_RESTART and KEY_WPS_BUTTON code for the appropriate buttons 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21083 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-04-22 09:25:37 +00:00
juhosg
67ab18e38a ramips: annotate device register function prototypes with __init 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20627 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-03-31 08:40:28 +00:00
juhosg
b7a96a32ea ramips: register wifi device for the RT2880 based boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20625 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-03-31 08:40:23 +00:00
juhosg
c03509e141 ramips: add wifi device for the RT2880 as well 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20624 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-03-31 08:40:20 +00:00
juhosg
c44ee422c3 ramips: register wifi device on the rt305x based boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20616 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-03-30 21:24:10 +00:00
blogic
0f85365209 The ralink rt305x board has a wireless card that can be used with the rt2800pci driver (it does not work yet but basically should). Hence, register the appropriate platform device to allow developing/testing the rt2800pci driver. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20599 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-03-30 12:04:05 +00:00
blogic
37bcda62c0 [ramips] Fix the base address of the wireless card. Otherwise it is not possible to register a platform wireless device as it overlaps with something else. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20596 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-03-30 10:06:05 +00:00
juhosg
c60a96964d ramips_eth: cleanup mac_address changing 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19464 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-01-31 17:56:36 +00:00
juhosg
1ca6778f34 ramips_eth: update register offsets 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19463 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-01-31 17:56:33 +00:00
juhosg
1630830019 ramips_eth: pass sys_clk via platform_data 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19462 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-01-31 17:56:30 +00:00
juhosg
0e069faefd ramips_eth: add helper functions to {ed,dis}able interrupts 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19446 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-01-31 12:48:53 +00:00
juhosg
48f3d520ec ramips_eth: remove unnecessary typecasts 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19445 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-01-31 12:48:51 +00:00
juhosg
2e8d8d35d9 ramips_eth: simplify tx_next computation 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19444 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-01-31 12:48:48 +00:00
juhosg
85ef0c49c7 ramips_eth: simplify tx descriptor initialization 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19443 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-01-31 12:48:46 +00:00
juhosg
52182673e4 ramips_eth: pass 'raeth_priv' struct directly to dma specific functions 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19442 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-01-31 12:48:43 +00:00
juhosg
d46c0be6b4 ramips_eth: convert to use netdev_ops 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19440 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-01-31 12:48:38 +00:00
juhosg
0ed414aa74 ramips_eth: fix invalid register writes 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19417 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-01-30 15:26:02 +00:00
juhosg
7fff48fa3a ramips_eth: move memset call out from the loop 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19416 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-01-30 15:25:59 +00:00
juhosg
4235b93588 ramips_eth: header file cleanup 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19415 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-01-30 15:25:57 +00:00
juhosg
06901dcfd6 ramips_eth: coding style cleanup 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19414 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-01-30 15:25:55 +00:00
juhosg
ad3d89cc5a ramips: register gpio buttons on the Fonera 2.0N board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19413 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-01-30 15:25:52 +00:00
juhosg
2531198c61 ramips: register gpio buttons on the WHR-G300N board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19412 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-01-30 15:25:49 +00:00
juhosg
29eddc2b3b ramips: register gpio buttons on the V22RW-2x2 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19411 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-01-30 15:25:47 +00:00
juhosg
bbd6ea8213 ramips: register gpio buttons on the DIR-300 revB board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19410 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-01-30 15:25:44 +00:00
juhosg
d3b0cb38e0 ramips: fix wrong base addresses for the RT288x 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19409 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-01-30 15:25:41 +00:00
juhosg
ac199ca1c4 ramips: include 'linux/leds.h' from 'dev-gpio-leds.h' 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19408 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-01-30 15:25:36 +00:00
juhosg
674066d500 ramips: rename dev_gpio_leds.h to dev-gpio-leds.h 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19407 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-01-30 15:25:33 +00:00
juhosg
38d8709940 ramips: cleanup WZR-AGL300NH board support file 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19406 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-01-30 15:25:29 +00:00
juhosg
6f44525650 ramips: register gpio-buttons on the RT-N15 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19405 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-01-30 15:25:25 +00:00
juhosg
1284f885f3 ramips: add common gpio-buttons device 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19404 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-01-30 15:25:20 +00:00
juhosg
c96f03b559 ramips: register rtl8366s device on the RT-N15 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19403 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-01-30 15:25:16 +00:00
juhosg
4b55dec3ed ramips: sanitize return value of ramips_gpio_get 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19401 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-01-30 15:25:08 +00:00
juhosg
1bd851b509 ramips: update mips multi-machine stuff 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19400 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-01-30 15:25:03 +00:00
jow
de12d253e8 [ramips] add initial support for the WZR-AGL300NH - patch by Joonas Lahtinen <joonas.lahtinen@gmail.com> 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19321 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-01-24 23:31:49 +00:00
juhosg
a1509a7028 ramips: register ethernet device on the WHR-G300N and V22RW-2x2 boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18229 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-30 15:15:41 +00:00
blogic
7a9d219092 [ramips] missing header file changes, and fix mtu value 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18220 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-30 09:18:40 +00:00
blogic
f46dbe37e1 [ramips] fixes rx path for eth, spinlock it, increases buffer size, board now survives ping -f 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18212 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-29 21:08:11 +00:00
blogic
7616e48d77 [ramips] hopefully fixes dma issues seen on ethernet driver when under high load 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18203 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-29 12:51:45 +00:00
juhosg
4497cf8437 ramips: move 'arch/mips/include/asm/mach-ralink/eth.h' to 'drivers/net/ramips_eth.h' 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18176 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-26 17:17:51 +00:00