From 25ebef8c87221774de01d1f1de4fb615fcfc6b54 Mon Sep 17 00:00:00 2001
From: Jason Jin <Jason.jin@freescale.com>
Date: Thu, 4 Aug 2011 09:59:47 +0800
Subject: [PATCH 34/52] Enable the NFC driver for soft_ecc.

If enabled YAFFS2 support, soft ecc should be used for the
nand flash driver.

Signed-off-by: Jason Jin <Jason.jin@freescale.com>
---
 drivers/mtd/nand/Kconfig   |    6 ++++++
 drivers/mtd/nand/fsl_nfc.c |   12 +++++++++---
 2 files changed, 15 insertions(+), 3 deletions(-)

--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -481,6 +481,12 @@ config MTD_NAND_FSL_NFC
 	  Enables support for NAND Flash chips wired onto Freescale PowerPC
 	  processor localbus with User-Programmable Machine support.
 
+config MTD_NAND_FSL_NFC_SWECC
+	bool "Software ECC"
+	depends on MTD_NAND_FSL_NFC
+	help
+	  Use software ECC.
+
 config MTD_NAND_MXC
 	tristate "MXC NAND support"
 	depends on ARCH_MX2 || ARCH_MX25 || ARCH_MX3 || ARCH_MX51
--- a/drivers/mtd/nand/fsl_nfc.c
+++ b/drivers/mtd/nand/fsl_nfc.c
@@ -403,9 +403,15 @@ fsl_nfc_command(struct mtd_info *mtd, un
 	if (page != -1)
 		prv->page = page;
 
-	nfc_set_field(mtd, NFC_FLASH_CONFIG,
-		CONFIG_ECC_MODE_MASK,
-		CONFIG_ECC_MODE_SHIFT, ECC_45_BYTE);
+	if(hardware_ecc)
+		nfc_set_field(mtd, NFC_FLASH_CONFIG,
+			CONFIG_ECC_MODE_MASK,
+			CONFIG_ECC_MODE_SHIFT, ECC_45_BYTE);
+	else
+		/* set ECC BY_PASS */
+		nfc_set_field(mtd, NFC_FLASH_CONFIG,
+				CONFIG_ECC_MODE_MASK,
+				CONFIG_ECC_MODE_SHIFT, ECC_BYPASS);
 
 	if (!(page%0x40)) {
 			nfc_set_field(mtd, NFC_FLASH_CONFIG,