/* * JzRISC lcd controller * * xiangfu liu * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #ifndef __QI_LB60_GPM940B0_H__ #define __QI_LB60_GPM940B0_H__ #include #define mdelay(n) udelay((n)*1000) #define NR_PALETTE 256 struct lcd_desc{ unsigned int next_desc; /* LCDDAx */ unsigned int databuf; /* LCDSAx */ unsigned int frame_id; /* LCDFIDx */ unsigned int cmd; /* LCDCMDx */ }; #define MODE_MASK 0x0f #define MODE_TFT_GEN 0x00 #define MODE_TFT_SHARP 0x01 #define MODE_TFT_CASIO 0x02 #define MODE_TFT_SAMSUNG 0x03 #define MODE_CCIR656_NONINT 0x04 #define MODE_CCIR656_INT 0x05 #define MODE_STN_COLOR_SINGLE 0x08 #define MODE_STN_MONO_SINGLE 0x09 #define MODE_STN_COLOR_DUAL 0x0a #define MODE_STN_MONO_DUAL 0x0b #define MODE_8BIT_SERIAL_TFT 0x0c #define MODE_TFT_18BIT (1<<7) #define STN_DAT_PIN1 (0x00 << 4) #define STN_DAT_PIN2 (0x01 << 4) #define STN_DAT_PIN4 (0x02 << 4) #define STN_DAT_PIN8 (0x03 << 4) #define STN_DAT_PINMASK STN_DAT_PIN8 #define STFT_PSHI (1 << 15) #define STFT_CLSHI (1 << 14) #define STFT_SPLHI (1 << 13) #define STFT_REVHI (1 << 12) #define SYNC_MASTER (0 << 16) #define SYNC_SLAVE (1 << 16) #define DE_P (0 << 9) #define DE_N (1 << 9) #define PCLK_P (0 << 10) #define PCLK_N (1 << 10) #define HSYNC_P (0 << 11) #define HSYNC_N (1 << 11) #define VSYNC_P (0 << 8) #define VSYNC_N (1 << 8) #define DATA_NORMAL (0 << 17) #define DATA_INVERSE (1 << 17) /* Jz LCDFB supported I/O controls. */ #define FBIOSETBACKLIGHT 0x4688 #define FBIODISPON 0x4689 #define FBIODISPOFF 0x468a #define FBIORESET 0x468b #define FBIOPRINT_REG 0x468c /* * LCD panel specific definition */ #define MODE 0xc9 /* 8bit serial RGB */ #define SPEN (32*2+21) /*LCD_SPL */ #define SPCK (32*2+23) /*LCD_CLS */ #define SPDA (32*2+22) /*LCD_D12 */ #define LCD_RET (32*3+27) #define __spi_write_reg1(reg, val) \ do { \ unsigned char no;\ unsigned short value;\ unsigned char a=0;\ unsigned char b=0;\ a=reg;\ b=val;\ __gpio_set_pin(SPEN);\ __gpio_set_pin(SPCK);\ __gpio_clear_pin(SPDA);\ __gpio_clear_pin(SPEN);\ udelay(25);\ value=((a<<8)|(b&0xFF));\ for(no=0;no<16;no++)\ {\ __gpio_clear_pin(SPCK);\ if((value&0x8000)==0x8000)\ __gpio_set_pin(SPDA);\ else\ __gpio_clear_pin(SPDA);\ udelay(25);\ __gpio_set_pin(SPCK);\ value=(value<<1); \ udelay(25);\ }\ __gpio_set_pin(SPEN);\ udelay(100);\ } while (0) #define __spi_write_reg(reg, val) \ do {\ __spi_write_reg1((reg<<2|2), val);\ udelay(100); \ }while(0) #define __lcd_special_pin_init() \ do { \ __gpio_as_output(SPEN); /* use SPDA */\ __gpio_as_output(SPCK); /* use SPCK */\ __gpio_as_output(SPDA); /* use SPDA */\ __gpio_as_output(LCD_RET);\ } while (0) #define __lcd_special_on() \ do { \ __spi_write_reg1(0x05, 0x1e); \ udelay(50);\ __spi_write_reg1(0x05, 0x5d); \ __spi_write_reg1(0x0B, 0x81); \ __spi_write_reg1(0x01, 0x95); \ __spi_write_reg1(0x00, 0x07); \ __spi_write_reg1(0x06, 0x15); \ __spi_write_reg1(0x07, 0x8d); \ __spi_write_reg1(0x04, 0x0f); \ __spi_write_reg1(0x0d, 0x3d); \ __spi_write_reg1(0x10, 0x42); \ __spi_write_reg1(0x11, 0x3a); \ __spi_write_reg1(0x05, 0x5f); \ } while (0) #define __lcd_special_off() \ do { \ __spi_write_reg1(0x05, 0x5e); \ } while (0) #define __lcd_set_backlight_level(n)\ do { \ __gpio_as_output(LCD_RET); \ __gpio_set_pin(LCD_RET); \ } while (0) #if defined(CONFIG_SAKC) #define __lcd_close_backlight() \ do { \ __gpio_as_output(GPIO_PWM); \ __gpio_clear_pin(GPIO_PWM); \ } while (0) #endif #if defined(CONFIG_SAKC) #define __lcd_display_pin_init() \ do { \ __cpm_start_tcu(); \ __lcd_special_pin_init(); \ } while (0) #define __lcd_display_on() \ do { \ __lcd_special_on(); \ } while (0) #define __lcd_display_off() \ do { \ __lcd_special_off(); \ } while (0) #else #define __lcd_display_pin_init() \ do { \ __cpm_start_tcu(); \ __lcd_special_pin_init(); \ } while (0) #define __lcd_display_on() \ do { \ __gpio_set_pin(GPIO_DISP_OFF_N); \ __lcd_special_on(); \ } while (0) #define __lcd_display_off() \ do { \ __lcd_special_off(); \ __gpio_clear_pin(GPIO_DISP_OFF_N); \ } while (0) #endif #endif /* __QI_LB60_GPM940B0_H__ */