diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index d25c6f6..5dc3d4c 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -281,6 +281,42 @@ config FB_JZLCD_4730_4740
 	depends on FB_JZSOC && (SOC_JZ4730 || SOC_JZ4740)
 	help
 	  This is the frame buffer device driver for the JZ4730 and JZ4740 LCD controller.
+config JZLCD_FRAMEBUFFER_MAX
+	int "Default FrameBuffer num"
+	depends on FB_JZLCD_4730_4740
+	default "1"
+       	---help---
+	  JZ LCD driver support multi-framebuffers for video applications.
+config JZLCD_FRAMEBUFFER_ROTATE_SUPPORT
+	bool "JZLCD FrameBuffer Rotate Support(For TEST)"
+	depends on FB_JZLCD_4730_4740
+	default n
+       	---help---
+	  JZ LCD driver framebuffer rotate support. Rotate angle can be 0,90,180,270.
+	  Note, this fearture is implemented by software, and will cost a lot of cpu capcity.
+	  That is to say, if you select this function, you system will become slowly.
+	  Rotate cost cpu about:
+	  ratate angle 0'C:    0% cpu
+	  ratate angle 90'C:  40% cpu
+	  ratate angle 180'C: 20% cpu
+	  ratate angle 270'C: 40% cpu
+
+config JZLCD_FRAMEBUFFER_DEFAULT_ROTATE_ANGLE
+	int "FrameBuffer default rotate angle"
+	depends on JZLCD_FRAMEBUFFER_ROTATE_SUPPORT
+	default 0
+       	---help---
+	  JZ LCD driver framebuffer angle value can be:
+	  	0:	0'C
+	  	1:	90'C
+	  	2:	180'C
+	  	3:	270'C
+config JZLCD_FRAMEBUFFER_BPP
+	int "FrameBuffer bit per pixel"
+	depends on JZLCD_FRAMEBUFFER_ROTATE_SUPPORT
+	default 32
+       	---help---
+	  JZ LCD driver framebuffer support 8bpp, 16bpp, 32bpp
 choice
 	depends on FB_JZLCD_4730_4740
 	prompt "LCD Panel"
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index c037677..c8db3fc 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -28,7 +28,7 @@ obj-$(CONFIG_FB_DDC)           += fb_ddc.o
 obj-$(CONFIG_FB_DEFERRED_IO)   += fb_defio.o
 
 # Hardware specific drivers go first
-obj-$(CONFIG_FB_JZLCD_4720_4740)  += jzlcd.o
+obj-$(CONFIG_FB_JZLCD_4730_4740)  += jzlcd.o
 obj-$(CONFIG_FB_JZ4740_SLCD)      += jz4740_slcd.o
 
 obj-$(CONFIG_FB_AMIGA)            += amifb.o c2p_planar.o