Index: drv_dsl_cpe_api-3.24.4.4/configure.in
===================================================================
--- drv_dsl_cpe_api-3.24.4.4.orig/configure.in	2009-08-13 13:39:21.000000000 +0200
+++ drv_dsl_cpe_api-3.24.4.4/configure.in	2010-10-14 02:14:55.000000000 +0200
@@ -310,7 +310,7 @@
 AC_ARG_ENABLE(kernelbuild,
     AC_HELP_STRING(--enable-kernel-build=x,Set the target kernel build path),
     [
-        if test -e $enableval/include/linux/autoconf.h; then
+        if test -e $enableval/include/linux/autoconf.h -o -e $enableval/include/generated/autoconf.h; then
             AC_SUBST([KERNEL_BUILD_PATH],[$enableval])
         else
             AC_MSG_ERROR([The kernel build directory is not valid or not configured!])
@@ -333,12 +333,12 @@
             echo Set the lib_ifxos include path $enableval
             AC_SUBST([IFXOS_INCLUDE_PATH],[$enableval])
         else
-            echo -e Set the default lib_ifxos include path $DEFAULT_IFXOS_INCLUDE_PATH
+            echo Set the default lib_ifxos include path $DEFAULT_IFXOS_INCLUDE_PATH
             AC_SUBST([IFXOS_INCLUDE_PATH],[$DEFAULT_IFXOS_INCLUDE_PATH])
         fi
     ],
     [
-        echo -e Set the default lib_ifxos include path $DEFAULT_IFXOS_INCLUDE_PATH
+        echo Set the default lib_ifxos include path $DEFAULT_IFXOS_INCLUDE_PATH
         AC_SUBST([IFXOS_INCLUDE_PATH],[$DEFAULT_IFXOS_INCLUDE_PATH])
     ]
 )
@@ -1702,73 +1702,73 @@
 AC_SUBST([DISTCHECK_CONFIGURE_PARAMS],[$CONFIGURE_OPTIONS])
 
 AC_CONFIG_COMMANDS_PRE([
-echo -e "------------------------------------------------------------------------"
-echo -e " Configuration for drv_dsl_cpe_api:"
-echo -e "  Configure model type:             $DSL_CONFIG_MODEL_TYPE"
-echo -e "  Source code location:             $srcdir"
-echo -e "  Compiler:                         $CC"
-echo -e "  Compiler c-flags:                 $CFLAGS"
-echo -e "  Extra compiler c-flags:           $EXTRA_DRV_CFLAGS"
-echo -e "  Host System Type:                 $host"
-echo -e "  Install path:                     $prefix"
-echo -e "  Linux kernel include path:        $KERNEL_INCL_PATH"
-echo -e "  Linux kernel build path:          $KERNEL_BUILD_PATH"
-echo -e "  Linux kernel architecture:        $KERNEL_ARCH"
-echo -e "  Include IFXOS:                    $INCLUDE_DSL_CPE_API_IFXOS_SUPPORT"
-echo -e "  IFXOS include path:               $IFXOS_INCLUDE_PATH"
-echo -e "  Driver Include Path               $DSL_DRIVER_INCL_PATH"
-echo -e "  DSL device:                       $DSL_DEVICE_NAME"
-echo -e "  Max device number:                $DSL_DRV_MAX_DEVICE_NUMBER"
-echo -e "  Channels per line:                $DSL_CHANNELS_PER_LINE"
-echo -e "  Build lib (only for kernel 2.6)   $DSL_CPE_API_LIBRARY_BUILD_2_6"
-echo -e "  DSL data led flash frequency:     $DSL_DATA_LED_FLASH_FREQUENCY Hz"
-echo -e "  Disable debug prints:             $DSL_DEBUG_DISABLE"
-echo -e "  Preselection of max. debug level: $DSL_DBG_MAX_LEVEL_SET"
-echo -e "  Preselected max. debug level:     $DSL_DBG_MAX_LEVEL_PRE"
-echo -e "  Include deprecated functions:     $INCLUDE_DEPRECATED"
-echo -e "  Include Device Exception Codes:   $INCLUDE_DEVICE_EXCEPTION_CODES"
-echo -e "  Include FW request support:       $INCLUDE_FW_REQUEST_SUPPORT"
-echo -e "  Include ADSL trace buffer:        $INCLUDE_DSL_CPE_TRACE_BUFFER"
-echo -e "  Include ADSL MIB:                 $INCLUDE_DSL_ADSL_MIB"
-echo -e "  Include ADSL LED:                 $INCLUDE_ADSL_LED"
-echo -e "  Include CEOC:                     $INCLUDE_DSL_CEOC"
-echo -e "  Include config get support:       $INCLUDE_DSL_CONFIG_GET"
-echo -e "  Include System i/f configuration: $INCLUDE_DSL_SYSTEM_INTERFACE"
-echo -e "  Include Resource Statistics:      $INCLUDE_DSL_RESOURCE_STATISTICS"
-echo -e "  Include Framing Parameters:       $INCLUDE_DSL_FRAMING_PARAMETERS"
-echo -e "  Include G997 Line Inventory:      $INCLUDE_DSL_G997_LINE_INVENTORY"
-echo -e "  Include G997 Framing Parameters:  $INCLUDE_DSL_G997_FRAMING_PARAMETERS"
-echo -e "  Include G997 per tone data:       $INCLUDE_DSL_G997_PER_TONE"
-echo -e "  Include G997 status:              $INCLUDE_DSL_G997_STATUS"
-echo -e "  Include G997 alarm:               $INCLUDE_DSL_G997_ALARM"
-echo -e "  Include DSL Bonding:              $INCLUDE_DSL_BONDING"
-echo -e "  Include Misc Line Status          $INCLUDE_DSL_CPE_MISC_LINE_STATUS"
-echo -e "  Include DELT:                     $INCLUDE_DSL_DELT"
-echo -e "  Include DELT data static storage: $DSL_CPE_STATIC_DELT_DATA"
-echo -e "  Include PM:                       $INCLUDE_DSL_PM"
-echo -e "  Include PM config:                $INCLUDE_DSL_CPE_PM_CONFIG"
-echo -e "  Include PM total:                 $INCLUDE_DSL_CPE_PM_TOTAL_COUNTERS"
-echo -e "  Include PM history:               $INCLUDE_DSL_CPE_PM_HISTORY"
-echo -e "  Include PM showtime:              $INCLUDE_DSL_CPE_PM_SHOWTIME_COUNTERS"
-echo -e "  Include PM optional:              $INCLUDE_DSL_CPE_PM_OPTIONAL_PARAMETERS"
-echo -e "  Include PM line:                  $INCLUDE_DSL_CPE_PM_LINE_COUNTERS"
-echo -e "  Include PM line event showtime:   $INCLUDE_DSL_CPE_PM_LINE_EVENT_SHOWTIME_COUNTERS"
-echo -e "  Include PM channel:               $INCLUDE_DSL_CPE_PM_CHANNEL_COUNTERS"
-echo -e "  Include PM channel extended:      $INCLUDE_DSL_CPE_PM_CHANNEL_EXT_COUNTERS"
-echo -e "  Include PM data path:             $INCLUDE_DSL_CPE_PM_DATA_PATH_COUNTERS"
-echo -e "  Include PM data path failure:     $INCLUDE_DSL_CPE_PM_DATA_PATH_FAILURE_COUNTERS"
-echo -e "  Include PM ReTx:                  $INCLUDE_DSL_CPE_PM_RETX_COUNTERS"
-echo -e "  Include PM line threshold:        $INCLUDE_DSL_CPE_PM_LINE_THRESHOLDS"
-echo -e "  Include PM channel threshold:     $INCLUDE_DSL_CPE_PM_CHANNEL_THRESHOLDS"
-echo -e "  Include PM data path threshold:   $INCLUDE_DSL_CPE_PM_DATA_PATH_THRESHOLDS"
-echo -e "  Include PM ReTx threshold:        $INCLUDE_DSL_CPE_PM_RETX_THRESHOLDS"
-echo -e "  Include FW memory free support:   $INCLUDE_DSL_FIRMWARE_MEMORY_FREE"
-echo -e "----------------------- deprectated ! ----------------------------------"
-echo -e "  Include PM line failure:          $INCLUDE_DSL_CPE_PM_LINE_FAILURE_COUNTERS"
-echo -e ""
-echo -e " Settings:"
-echo -e "  Configure options:                $CONFIGURE_OPTIONS"
-echo -e "------------------------------------------------------------------------"
+echo "------------------------------------------------------------------------"
+echo " Configuration for drv_dsl_cpe_api:"
+echo "  Configure model type:             $DSL_CONFIG_MODEL_TYPE"
+echo "  Source code location:             $srcdir"
+echo "  Compiler:                         $CC"
+echo "  Compiler c-flags:                 $CFLAGS"
+echo "  Extra compiler c-flags:           $EXTRA_DRV_CFLAGS"
+echo "  Host System Type:                 $host"
+echo "  Install path:                     $prefix"
+echo "  Linux kernel include path:        $KERNEL_INCL_PATH"
+echo "  Linux kernel build path:          $KERNEL_BUILD_PATH"
+echo "  Linux kernel architecture:        $KERNEL_ARCH"
+echo "  Include IFXOS:                    $INCLUDE_DSL_CPE_API_IFXOS_SUPPORT"
+echo "  IFXOS include path:               $IFXOS_INCLUDE_PATH"
+echo "  Driver Include Path               $DSL_DRIVER_INCL_PATH"
+echo "  DSL device:                       $DSL_DEVICE_NAME"
+echo "  Max device number:                $DSL_DRV_MAX_DEVICE_NUMBER"
+echo "  Channels per line:                $DSL_CHANNELS_PER_LINE"
+echo "  Build lib (only for kernel 2.6)   $DSL_CPE_API_LIBRARY_BUILD_2_6"
+echo "  DSL data led flash frequency:     $DSL_DATA_LED_FLASH_FREQUENCY Hz"
+echo "  Disable debug prints:             $DSL_DEBUG_DISABLE"
+echo "  Preselection of max. debug level: $DSL_DBG_MAX_LEVEL_SET"
+echo "  Preselected max. debug level:     $DSL_DBG_MAX_LEVEL_PRE"
+echo "  Include deprecated functions:     $INCLUDE_DEPRECATED"
+echo "  Include Device Exception Codes:   $INCLUDE_DEVICE_EXCEPTION_CODES"
+echo "  Include FW request support:       $INCLUDE_FW_REQUEST_SUPPORT"
+echo "  Include ADSL trace buffer:        $INCLUDE_DSL_CPE_TRACE_BUFFER"
+echo "  Include ADSL MIB:                 $INCLUDE_DSL_ADSL_MIB"
+echo "  Include ADSL LED:                 $INCLUDE_ADSL_LED"
+echo "  Include CEOC:                     $INCLUDE_DSL_CEOC"
+echo "  Include config get support:       $INCLUDE_DSL_CONFIG_GET"
+echo "  Include System i/f configuration: $INCLUDE_DSL_SYSTEM_INTERFACE"
+echo "  Include Resource Statistics:      $INCLUDE_DSL_RESOURCE_STATISTICS"
+echo "  Include Framing Parameters:       $INCLUDE_DSL_FRAMING_PARAMETERS"
+echo "  Include G997 Line Inventory:      $INCLUDE_DSL_G997_LINE_INVENTORY"
+echo "  Include G997 Framing Parameters:  $INCLUDE_DSL_G997_FRAMING_PARAMETERS"
+echo "  Include G997 per tone data:       $INCLUDE_DSL_G997_PER_TONE"
+echo "  Include G997 status:              $INCLUDE_DSL_G997_STATUS"
+echo "  Include G997 alarm:               $INCLUDE_DSL_G997_ALARM"
+echo "  Include DSL Bonding:              $INCLUDE_DSL_BONDING"
+echo "  Include Misc Line Status          $INCLUDE_DSL_CPE_MISC_LINE_STATUS"
+echo "  Include DELT:                     $INCLUDE_DSL_DELT"
+echo "  Include DELT data static storage: $DSL_CPE_STATIC_DELT_DATA"
+echo "  Include PM:                       $INCLUDE_DSL_PM"
+echo "  Include PM config:                $INCLUDE_DSL_CPE_PM_CONFIG"
+echo "  Include PM total:                 $INCLUDE_DSL_CPE_PM_TOTAL_COUNTERS"
+echo "  Include PM history:               $INCLUDE_DSL_CPE_PM_HISTORY"
+echo "  Include PM showtime:              $INCLUDE_DSL_CPE_PM_SHOWTIME_COUNTERS"
+echo "  Include PM optional:              $INCLUDE_DSL_CPE_PM_OPTIONAL_PARAMETERS"
+echo "  Include PM line:                  $INCLUDE_DSL_CPE_PM_LINE_COUNTERS"
+echo "  Include PM line event showtime:   $INCLUDE_DSL_CPE_PM_LINE_EVENT_SHOWTIME_COUNTERS"
+echo "  Include PM channel:               $INCLUDE_DSL_CPE_PM_CHANNEL_COUNTERS"
+echo "  Include PM channel extended:      $INCLUDE_DSL_CPE_PM_CHANNEL_EXT_COUNTERS"
+echo "  Include PM data path:             $INCLUDE_DSL_CPE_PM_DATA_PATH_COUNTERS"
+echo "  Include PM data path failure:     $INCLUDE_DSL_CPE_PM_DATA_PATH_FAILURE_COUNTERS"
+echo "  Include PM ReTx:                  $INCLUDE_DSL_CPE_PM_RETX_COUNTERS"
+echo "  Include PM line threshold:        $INCLUDE_DSL_CPE_PM_LINE_THRESHOLDS"
+echo "  Include PM channel threshold:     $INCLUDE_DSL_CPE_PM_CHANNEL_THRESHOLDS"
+echo "  Include PM data path threshold:   $INCLUDE_DSL_CPE_PM_DATA_PATH_THRESHOLDS"
+echo "  Include PM ReTx threshold:        $INCLUDE_DSL_CPE_PM_RETX_THRESHOLDS"
+echo "  Include FW memory free support:   $INCLUDE_DSL_FIRMWARE_MEMORY_FREE"
+echo "----------------------- deprectated ! ----------------------------------"
+echo "  Include PM line failure:          $INCLUDE_DSL_CPE_PM_LINE_FAILURE_COUNTERS"
+echo ""
+echo " Settings:"
+echo "  Configure options:                $CONFIGURE_OPTIONS"
+echo "------------------------------------------------------------------------"
 ])
 
 AC_CONFIG_FILES([Makefile src/Makefile])
Index: drv_dsl_cpe_api-3.24.4.4/src/Makefile.am
===================================================================
--- drv_dsl_cpe_api-3.24.4.4.orig/src/Makefile.am	2009-07-03 14:06:34.000000000 +0200
+++ drv_dsl_cpe_api-3.24.4.4/src/Makefile.am	2010-10-14 02:14:55.000000000 +0200
@@ -303,7 +303,7 @@
 drv_dsl_cpe_api_OBJS = "$(subst .c,.o,$(filter %.c,$(drv_dsl_cpe_api_SOURCES)))"
 
 drv_dsl_cpe_api.ko: $(drv_dsl_cpe_api_SOURCES)
-	@echo -e "drv_dsl_cpe_api: Making Linux 2.6.x kernel object"
+	@echo "drv_dsl_cpe_api: Making Linux 2.6.x kernel object"
 	if test ! -e common/drv_dsl_cpe_api.c ; then \
 		echo "copy source files (as links only!)"; \
 		for f in $(filter %.c,$(drv_dsl_cpe_api_SOURCES)); do \
@@ -311,10 +311,10 @@
 			cp -s $(addprefix @abs_srcdir@/,$$f) $(PWD)/`dirname $$f`/ ; \
 		done \
 	fi
-	@echo -e "# drv_dsl_cpe_api: Generated to build Linux 2.6.x kernel object" > $(PWD)/Kbuild
-	@echo -e "obj-m := $(subst .ko,.o,$@)"			>> $(PWD)/Kbuild
-	@echo -e "$(subst .ko,,$@)-y := $(drv_dsl_cpe_api_OBJS)"	>> $(PWD)/Kbuild
-	@echo -e "EXTRA_CFLAGS := $(CFLAGS) -DHAVE_CONFIG_H $(drv_dsl_cpe_api_CFLAGS) $(DSL_DRIVER_INCL_PATH) $(IFXOS_INCLUDE_PATH) -I@abs_srcdir@/include -I$(PWD)/include"	>> $(PWD)/Kbuild
+	@echo "# drv_dsl_cpe_api: Generated to build Linux 2.6.x kernel object" > $(PWD)/Kbuild
+	@echo "obj-m := $(subst .ko,.o,$@)"			>> $(PWD)/Kbuild
+	@echo "$(subst .ko,,$@)-y := $(drv_dsl_cpe_api_OBJS)"	>> $(PWD)/Kbuild
+	@echo "EXTRA_CFLAGS := $(CFLAGS) -DHAVE_CONFIG_H $(drv_dsl_cpe_api_CFLAGS) $(DSL_DRIVER_INCL_PATH) $(IFXOS_INCLUDE_PATH) -I@abs_srcdir@/include -I$(PWD)/include"	>> $(PWD)/Kbuild
 	$(MAKE) ARCH=@KERNEL_ARCH@ -C @KERNEL_BUILD_PATH@ O=@KERNEL_BUILD_PATH@ M=$(PWD) modules
 
 clean-generic:
Index: drv_dsl_cpe_api-3.24.4.4/src/include/drv_dsl_cpe_os_linux.h
===================================================================
--- drv_dsl_cpe_api-3.24.4.4.orig/src/include/drv_dsl_cpe_os_linux.h	2010-10-14 02:14:55.000000000 +0200
+++ drv_dsl_cpe_api-3.24.4.4/src/include/drv_dsl_cpe_os_linux.h	2010-10-14 02:14:55.000000000 +0200
@@ -16,8 +16,6 @@
    extern "C" {
 #endif
 
-#include <asm/ioctl.h>
-#include <generated/autoconf.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -40,6 +38,7 @@
 #include <linux/poll.h>
 #include <asm/uaccess.h>
 #include <linux/smp_lock.h>
+#include <asm/ioctl.h>
 
 #ifdef INCLUDE_DSL_CPE_API_IFXOS_SUPPORT
 /** IFXOS includes*/