This enables the mmc-over-spi driver for the Sim.One board, based on Mika's patch, which used a GPIO for chip select in stead of the default SFRMOUT pin. I've modified it to use the usual SFRMOUT; if you've modified your Sim.One board to use a GPIO instead, uncomment and modify // #define MMC_CHIP_SELECT_GPIO EP93XX_GPIO_LINE_EGPIO15 in the source file. -martinwguy, 14 May 2010 From: Mika Westerberg <mika.westerberg@iki.fi> Date: Wed, 28 Apr 2010 08:42:46 +0300 Subject: [PATCH] ep93xx: simone: added board specific SPI support for MMC/SD cards This includes setting up EGPIOs 0 and 9 for card detection and chip select respectively. --- a/arch/arm/mach-ep93xx/simone.c +++ b/arch/arm/mach-ep93xx/simone.c @@ -18,12 +18,16 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> +#include <linux/mmc/host.h> #include <linux/gpio.h> +#include <linux/spi/spi.h> +#include <linux/spi/mmc_spi.h> #include <linux/i2c.h> #include <linux/i2c-gpio.h> #include <mach/hardware.h> #include <mach/fb.h> +#include <mach/ep93xx_spi.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -38,6 +42,135 @@ static struct ep93xxfb_mach_info __initd .flags = EP93XXFB_USE_SDCSN0 | EP93XXFB_PCLK_FALLING, }; +/* + * GPIO lines used for MMC card detection. + */ +#define MMC_CARD_DETECT_GPIO EP93XX_GPIO_LINE_EGPIO0 + +/* + * If you have hacked your Sim.One to use a GPIO as SD card chip select + * (SD pin 1), uncomment the following line. + * The example, EGPIO15, is on TP17 near the CPU. + */ +// #define MMC_CHIP_SELECT_GPIO EP93XX_GPIO_LINE_EGPIO15 + +/* + * MMC SPI chip select GPIO handling. If you are using SFRMOUT (SFRM1) signal, + * you can leave these empty and pass NULL as .controller_data. + */ + +#ifdef MMC_CHIP_SELECT_GPIO +static int simone_mmc_spi_setup(struct spi_device *spi) +{ + unsigned int gpio = MMC_CHIP_SELECT_GPIO; + int err; + + err = gpio_request(gpio, spi->modalias); + if (err) + return err; + + err = gpio_direction_output(gpio, 1); + if (err) { + gpio_free(gpio); + return err; + } + + return 0; +} + +static void simone_mmc_spi_cleanup(struct spi_device *spi) +{ + unsigned int gpio = MMC_CHIP_SELECT_GPIO; + + gpio_set_value(gpio, 1); + gpio_direction_input(gpio); + gpio_free(gpio); +} + +static void simone_mmc_spi_cs_control(struct spi_device *spi, int value) +{ + gpio_set_value(MMC_CHIP_SELECT_GPIO, value); +} + +static struct ep93xx_spi_chip_ops simone_mmc_spi_ops = { + .setup = simone_mmc_spi_setup, + .cleanup = simone_mmc_spi_cleanup, + .cs_control = simone_mmc_spi_cs_control, +}; +#endif + +/* + * MMC card detection GPIO setup. + */ +static int simone_mmc_spi_init(struct device *dev, + irqreturn_t (*irq_handler)(int, void *), void *mmc) +{ + unsigned int gpio = MMC_CARD_DETECT_GPIO; + int irq, err; + + err = gpio_request(gpio, dev_name(dev)); + if (err) + return err; + + err = gpio_direction_input(gpio); + if (err) + goto fail; + + irq = gpio_to_irq(gpio); + if (irq < 0) + goto fail; + + err = request_irq(irq, irq_handler, IRQF_TRIGGER_FALLING, + "MMC card detect", mmc); + if (err) + goto fail; + + printk(KERN_INFO "%s: using irq %d for MMC card detection\n", + dev_name(dev), irq); + + return 0; +fail: + gpio_free(gpio); + return err; +} + +static void simone_mmc_spi_exit(struct device *dev, void *mmc) +{ + unsigned int gpio = MMC_CARD_DETECT_GPIO; + + free_irq(gpio_to_irq(gpio), mmc); + gpio_free(gpio); +} + +static struct mmc_spi_platform_data simone_mmc_spi_data = { + .init = simone_mmc_spi_init, + .exit = simone_mmc_spi_exit, + .detect_delay = 500, + .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, +}; + +static struct spi_board_info simone_spi_devices[] __initdata = { + { + .modalias = "mmc_spi", +#ifdef MMC_CHIP_SELECT_GPIO + .controller_data = &simone_mmc_spi_ops, +#endif + .platform_data = &simone_mmc_spi_data, + /* + * We use 10 MHz even though the maximum is 3.7 MHz. The driver + * will limit it automatically to max. frequency. + */ + .max_speed_hz = 10 * 1000 * 1000, + .bus_num = 0, + .chip_select = 0, + .mode = SPI_MODE_3, + }, +}; + +static struct ep93xx_spi_info simone_spi_info __initdata = { + .num_chipselect = ARRAY_SIZE(simone_spi_devices), +}; + static struct i2c_gpio_platform_data __initdata simone_i2c_gpio_data = { .sda_pin = EP93XX_GPIO_LINE_EEDAT, .sda_is_open_drain = 0, @@ -61,6 +194,8 @@ static void __init simone_init_machine(v ep93xx_register_fb(&simone_fb_info); ep93xx_register_i2c(&simone_i2c_gpio_data, simone_i2c_board_info, ARRAY_SIZE(simone_i2c_board_info)); + ep93xx_register_spi(&simone_spi_info, simone_spi_devices, + ARRAY_SIZE(simone_spi_devices)); ep93xx_register_ac97(); }