From 17f15e207516c665bb080f650e04e01577069979 Mon Sep 17 00:00:00 2001 From: Xiangfu Liu Date: Mon, 31 Aug 2009 10:47:00 +0800 Subject: [PATCH] qi_lb60 --- arch/mips/Kconfig | 8 ++ arch/mips/include/asm/mach-jz4740/board-qi_lb60.h | 79 +++++++++++++++ arch/mips/include/asm/mach-jz4740/jz4740.h | 4 + arch/mips/jz4740/Makefile | 1 + arch/mips/jz4740/board-qi_lb60.c | 110 +++++++++++++++++++++ drivers/video/jzlcd.c | 23 +++-- drivers/video/jzlcd.h | 15 +++- 7 files changed, 227 insertions(+), 13 deletions(-) create mode 100644 arch/mips/include/asm/mach-jz4740/board-qi_lb60.h create mode 100644 arch/mips/jz4740/board-qi_lb60.c mode change 100755 => 100644 drivers/video/jz4740_slcd.c mode change 100755 => 100644 drivers/video/jzlcd.c mode change 100755 => 100644 drivers/video/jzlcd.h diff --git a/arch/mips/include/asm/mach-jz4740/board-qi_lb60.h b/arch/mips/include/asm/mach-jz4740/board-qi_lb60.h new file mode 100644 index 0000000..b2f02f4 --- /dev/null +++ b/arch/mips/include/asm/mach-jz4740/board-qi_lb60.h @@ -0,0 +1,79 @@ +/* + * linux/include/asm-mips/mach-jz4740/board-qi_lb60.h + * + * Copyright (c) 2009 Qi Hardware inc., + * Author: Xiangfu Liu + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 3 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_JZ4740_QI_LB60_H__ +#define __ASM_JZ4740_QI_LB60_H__ + +/* + * Frequencies of on-board oscillators + */ +#define JZ_EXTAL 12000000 /* Main extal freq: 12 MHz */ +#define JZ_EXTAL2 32768 /* RTC extal freq: 32.768 KHz */ + +/* + * GPIO + */ +#define GPIO_DC_DETE_N (2 * 32 + 26) +#define GPIO_CHARG_STAT_N (2 * 32 + 27) +#define GPIO_LED_EN (2 * 32 + 28) +#define GPIO_LCD_CS (2 * 32 + 21) +#define GPIO_DISP_OFF_N (3 * 32 + 21) +#define GPIO_PWM (3 * 32 + 27) + +#define GPIO_AMP_EN (3 * 32 + 4) + +#define GPIO_SD_CD_N (3 * 32 + 0) +#define GPIO_SD_VCC_EN_N (3 * 32 + 2) +#define GPIO_SD_WP (3 * 32 + 16) + +#define GPIO_USB_DETE (3 * 32 + 28) +#define GPIO_BUZZ_PWM (3 * 32 + 27) +#define GPIO_UDC_HOTPLUG GPIO_USB_DETE + +#define GPIO_AUDIO_POP (1 * 32 + 29) +#define GPIO_COB_TEST (1 * 32 + 30) + +#define GPIO_KEYOUT_BASE (2 * 32 + 10) +#define GPIO_KEYIN_BASE (3 * 32 + 18) +#define GPIO_KEYIN_8 (3 * 32 + 26) + +/* + * MMC/SD + */ +#define MSC_WP_PIN GPIO_SD_WP +#define MSC_HOTPLUG_PIN GPIO_SD_CD_N +#define MSC_HOTPLUG_IRQ (IRQ_GPIO_0 + GPIO_SD_CD_N) + +#define __msc_init_io() \ +do { \ + __gpio_as_output(GPIO_SD_VCC_EN_N); \ + __gpio_as_input(GPIO_SD_CD_N); \ +} while (0) + +#define __msc_enable_power() \ +do { \ + __gpio_clear_pin(GPIO_SD_VCC_EN_N); \ +} while (0) + +#define __msc_disable_power() \ +do { \ + __gpio_set_pin(GPIO_SD_VCC_EN_N); \ +} while (0) + +#define __msc_card_detected(s) \ +({ \ + int detected = 1; \ + if (!__gpio_get_pin(GPIO_SD_CD_N)) \ + detected = 0; \ + detected; \ +}) + +#endif /* __ASM_JZ4740_QI_LB60_H__ */ diff --git a/arch/mips/include/asm/mach-jz4740/jz4740.h b/arch/mips/include/asm/mach-jz4740/jz4740.h index 437caf4..d38d5f1 100644 --- a/arch/mips/include/asm/mach-jz4740/jz4740.h +++ b/arch/mips/include/asm/mach-jz4740/jz4740.h @@ -43,6 +43,10 @@ #include #endif +#ifdef CONFIG_JZ4740_QI_LB60 +#include +#endif + /* Add other platform definition here ... */ diff --git a/arch/mips/jz4740/Makefile b/arch/mips/jz4740/Makefile index 0259876..8491d5f 100644 --- a/arch/mips/jz4740/Makefile +++ b/arch/mips/jz4740/Makefile @@ -16,6 +16,7 @@ obj-$(CONFIG_JZ4740_LEO) += board-leo.o obj-$(CONFIG_JZ4740_LYRA) += board-lyra.o obj-$(CONFIG_JZ4725_DIPPER) += board-dipper.o obj-$(CONFIG_JZ4720_VIRGO) += board-virgo.o +obj-$(CONFIG_JZ4740_QI_LB60) += board-qi_lb60.o # PM support diff --git a/arch/mips/jz4740/board-qi_lb60.c b/arch/mips/jz4740/board-qi_lb60.c new file mode 100644 index 0000000..127fad8 --- /dev/null +++ b/arch/mips/jz4740/board-qi_lb60.c @@ -0,0 +1,110 @@ +/* + * linux/arch/mips/jz4740/board-qi_lb60.c + * + * QI_LB60 setup routines. + * + * Copyright (c) 2009 Qi Hardware inc., + * Author: Xiangfu Liu + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 3 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include + +extern void (*jz_timer_callback)(void); + +static void dancing(void) +{ + static unsigned int count = 0; + + count ++; + count &= 1; + if (count) + __gpio_set_pin(GPIO_LED_EN); + else + __gpio_clear_pin(GPIO_LED_EN); +} + +static void pi_timer_callback(void) +{ + static unsigned long count = 0; + + if ((++count) % 50 == 0) { + dancing(); + count = 0; + } +} + +static void __init board_cpm_setup(void) +{ + /* Stop unused module clocks here. + * We have started all module clocks at arch/mips/jz4740/setup.c. + */ +} + +static void __init board_gpio_setup(void) +{ + /* + * Most of the GPIO pins should have been initialized by the boot-loader + */ + + /* + * Initialize MSC pins + */ + /* __gpio_as_msc(); */ + + /* + * Initialize LCD pins + */ + /* __gpio_as_lcd_18bit(); */ + + /* + * Initialize SSI pins + */ + /* __gpio_as_ssi(); */ + + /* + * Initialize I2C pins + */ + /* __gpio_as_i2c(); */ + + /* + * Initialize Other pins + */ + __gpio_as_output(GPIO_SD_VCC_EN_N); + __gpio_disable_pull(GPIO_SD_VCC_EN_N); + __gpio_clear_pin(GPIO_SD_VCC_EN_N); + + __gpio_as_input(GPIO_SD_CD_N); + __gpio_disable_pull(GPIO_SD_CD_N); + + __gpio_as_input(GPIO_SD_WP); + __gpio_disable_pull(GPIO_SD_WP); + + __gpio_as_input(GPIO_DC_DETE_N); + __gpio_as_input(GPIO_CHARG_STAT_N); +} + +void __init jz_board_setup(void) +{ + printk("Qi Hardware JZ4740 QI_LB60 setup\n"); + + board_cpm_setup(); + board_gpio_setup(); + + jz_timer_callback = pi_timer_callback; +} diff --git a/drivers/video/jz4740_slcd.c b/drivers/video/jz4740_slcd.c old mode 100755 new mode 100644 diff --git a/drivers/video/jzlcd.c b/drivers/video/jzlcd.c old mode 100755 new mode 100644 index 6df9439..2cb7114 --- a/drivers/video/jzlcd.c +++ b/drivers/video/jzlcd.c @@ -127,15 +127,18 @@ static struct jzfb_info jzfb = { MODE_TFT_GEN | HSYNC_N | VSYNC_N | PCLK_N | DE_N, 320, 240, 16, 60, 3, 3, 3, 3, 3, 85 /* 320x240 */ #endif -#if defined(CONFIG_JZLCD_FOXCONN_PT035TN01) && defined(CONFIG_JZ4740_PAVO) - MODE_TFT_GEN | HSYNC_N | VSYNC_N | MODE_TFT_18BIT | PCLK_N, -// 320, 240, 18, 110, 1, 1, 10, 50, 10, 13 - 320, 240, 18, 80, 1, 1, 10, 50, 10, 13 -#endif -#if defined(CONFIG_JZLCD_FOXCONN_PT035TN01) && !(defined(CONFIG_JZ4740_PAVO)) - MODE_TFT_GEN | HSYNC_N | VSYNC_N | PCLK_N, - 320, 240, 16, 110, 1, 1, 10, 50, 10, 13 -#endif +#if defined(CONFIG_JZLCD_FOXCONN_PT035TN01) + #if defined(CONFIG_JZ4740_PAVO) + MODE_TFT_GEN | HSYNC_N | VSYNC_N | MODE_TFT_18BIT | PCLK_N, + 320, 240, 18, 80, 1, 1, 10, 50, 10, 13 + #elif defined(CONFIG_JZ4740_QI_LB60) + MODE_8BIT_SERIAL_TFT | PCLK_N | HSYNC_N | VSYNC_N, + 320, 240, 32, 70, 1, 1, 273, 140, 1, 20 + #else + MODE_TFT_GEN | HSYNC_N | VSYNC_N | PCLK_N, + 320, 240, 16, 110, 1, 1, 10, 50, 10, 13 + #endif +#endif /* CONFIG_JZLCD_FOXCONN_PT035TN01 */ #if defined(CONFIG_JZLCD_INNOLUX_PT035TN01_SERIAL) MODE_8BIT_SERIAL_TFT | PCLK_N | HSYNC_N | VSYNC_N, 320, 240, 32, 60, 1, 1, 10, 50, 10, 13 @@ -1487,7 +1490,7 @@ static int __init jzfb_probe(struct platform_device *pdev) printk("fb%d: %s frame buffer device, using %dK of video memory\n", cfb->fb.node, cfb->fb.fix.id, cfb->fb.fix.smem_len>>10); - __lcd_display_on(); + __lcd_display_off(); return 0; diff --git a/drivers/video/jzlcd.h b/drivers/video/jzlcd.h old mode 100755 new mode 100644 index 8a3d855..e2e6978 --- a/drivers/video/jzlcd.h +++ b/drivers/video/jzlcd.h @@ -363,7 +363,11 @@ do { \ #if defined(CONFIG_JZLCD_FOXCONN_PT035TN01) || defined(CONFIG_JZLCD_INNOLUX_PT035TN01_SERIAL) #if defined(CONFIG_JZLCD_FOXCONN_PT035TN01) /* board pmp */ -#define MODE 0xcd /* 24bit parellel RGB */ + #if defined(CONFIG_JZ4740_QI_LB60) + #define MODE 0xc9 + #else + #define MODE 0xcd /* 24bit parellel RGB */ + #endif #endif #if defined(CONFIG_JZLCD_INNOLUX_PT035TN01_SERIAL) #define MODE 0xc9 /* 8bit serial RGB */ @@ -384,6 +388,11 @@ do { \ #define SPCK (32*1+17) //LCD_CLS #define SPDA (32*2+12) //LCD_D12 #define LCD_RET (32*2+23) //LCD_REV, GPC23 +#elif defined(CONFIG_JZ4740_QI_LB60) + #define SPEN (32*2+21) //LCD_SPL + #define SPCK (32*2+23) //LCD_CLS + #define SPDA (32*2+22) //LCD_D12 + #define LCD_RET (32*3+27) #if 0 /*old driver*/ #define SPEN (32*1+18) //LCD_SPL #define SPCK (32*1+17) //LCD_CLS @@ -655,7 +664,7 @@ do { \ /*#if defined(CONFIG_JZ4740_LEO) || defined(CONFIG_JZ4740_PAVO)*/ #if defined(CONFIG_SOC_JZ4740) -#if defined(CONFIG_JZ4740_PAVO) || defined(CONFIG_JZ4740_LYRA) +#if defined(CONFIG_JZ4740_PAVO) || defined(CONFIG_JZ4740_LYRA) || defined(CONFIG_JZ4740_QI_LB60) #define PWM_CHN 4 /* pwm channel */ #define PWM_FULL 101 /* 100 level: 0,1,...,100 */ @@ -724,7 +733,7 @@ do { \ do { \ __gpio_set_pin(GPIO_DISP_OFF_N); \ __lcd_special_on(); \ - __lcd_set_backlight_level(80); \ + __lcd_set_backlight_level(20); \ } while (0) #define __lcd_display_off() \ -- 1.6.0.4