--- /dev/null +++ b/arch/arm/mach-ixp4xx/mi424wr-pci.c @@ -0,0 +1,71 @@ +/* + * arch/arm/mach-ixp4xx/mi424wr-pci.c + * + * Actiontec MI424WR board-level PCI initialization + * + * Copyright (C) 2008 Jose Vasconcellos + * + * Maintainer: Jose Vasconcellos <jvasco@verizon.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/irq.h> + +#include <asm/mach-types.h> +#include <asm/mach/pci.h> + +/* PCI controller GPIO to IRQ pin mappings + * This information was obtained from Actiontec's GPL release. + * + * INTA INTB + * SLOT 13 8 6 + * SLOT 14 7 8 + * SLOT 15 6 7 + */ + +void __init mi424wr_pci_preinit(void) +{ + set_irq_type(IRQ_IXP4XX_GPIO6, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_IXP4XX_GPIO7, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW); + + ixp4xx_pci_preinit(); +} + +static int __init mi424wr_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + if (slot == 13) + return IRQ_IXP4XX_GPIO8; + if (slot == 14) + return IRQ_IXP4XX_GPIO7; + if (slot == 15) + return IRQ_IXP4XX_GPIO6; + + return -1; +} + +struct hw_pci mi424wr_pci __initdata = { + .nr_controllers = 1, + .preinit = mi424wr_pci_preinit, + .swizzle = pci_std_swizzle, + .setup = ixp4xx_setup, + .scan = ixp4xx_scan_bus, + .map_irq = mi424wr_map_irq, +}; + +int __init mi424wr_pci_init(void) +{ + if (machine_is_mi424wr()) + pci_common_init(&mi424wr_pci); + return 0; +} + +subsys_initcall(mi424wr_pci_init); + --- /dev/null +++ b/arch/arm/mach-ixp4xx/mi424wr-setup.c @@ -0,0 +1,344 @@ +/* + * arch/arm/mach-ixp4xx/mi424wr-setup.c + * + * Actiontec MI424-WR board setup + * Copyright (c) 2008 Jose Vasconcellos + * + * Based on Gemtek GTWX5715 by + * Copyright (C) 2004 George T. Joseph + * Derived from Coyote + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <linux/init.h> +#include <linux/device.h> +#include <linux/serial.h> +#include <linux/serial_8250.h> +#include <linux/types.h> +#include <linux/memory.h> +#include <linux/leds.h> +#include <linux/spi/spi_gpio_old.h> + +#include <asm/setup.h> +#include <asm/irq.h> +#include <asm/io.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/flash.h> + +/* + * GPIO 2,3,4 and 9 are hard wired to the Micrel/Kendin KS8995M Switch + * and operate as an SPI type interface. The details of the interface + * are available on Kendin/Micrel's web site. + */ + +#define MI424WR_KSSPI_SELECT 9 +#define MI424WR_KSSPI_TXD 4 +#define MI424WR_KSSPI_CLOCK 2 +#define MI424WR_KSSPI_RXD 3 + +/* + * The "reset" button is wired to GPIO 10. + * The GPIO is brought "low" when the button is pushed. + */ + +#define MI424WR_BUTTON_GPIO 10 +#define MI424WR_BUTTON_IRQ IRQ_IXP4XX_GPIO10 + +#define MI424WR_MOCA_WAN_LED 11 + +/* Latch on CS1 - taken from Actiontec's 2.4 source code + * + * default latch value + * 0 - power alarm led (red) 0 (off) + * 1 - power led (green) 0 (off) + * 2 - wireless led (green) 1 (off) + * 3 - no internet led (red) 0 (off) + * 4 - internet ok led (green) 0 (off) + * 5 - moca LAN 0 (off) + * 6 - WAN alarm led (red) 0 (off) + * 7 - PCI reset 1 (not reset) + * 8 - IP phone 1 led (green) 1 (off) + * 9 - IP phone 2 led (green) 1 (off) + * 10 - VOIP ready led (green) 1 (off) + * 11 - PSTN relay 1 control 0 (PSTN) + * 12 - PSTN relay 1 control 0 (PSTN) + * 13 - N/A + * 14 - N/A + * 15 - N/A + */ + +#define MI424WR_LATCH_MASK 0x04 +#define MI424WR_LATCH_DEFAULT 0x1f86 + +#define MI424WR_LATCH_ALARM_LED 0x00 +#define MI424WR_LATCH_POWER_LED 0x01 +#define MI424WR_LATCH_WIRELESS_LED 0x02 +#define MI424WR_LATCH_INET_DOWN_LED 0x03 +#define MI424WR_LATCH_INET_OK_LED 0x04 +#define MI424WR_LATCH_MOCA_LAN_LED 0x05 +#define MI424WR_LATCH_WAN_ALARM_LED 0x06 +#define MI424WR_LATCH_PCI_RESET 0x07 +#define MI424WR_LATCH_PHONE1_LED 0x08 +#define MI424WR_LATCH_PHONE2_LED 0x09 +#define MI424WR_LATCH_VOIP_LED 0x10 +#define MI424WR_LATCH_PSTN_RELAY1 0x11 +#define MI424WR_LATCH_PSTN_RELAY2 0x12 + +/* initialize CS1 to default timings, Intel style, 16-bit bus */ +#define MI424WR_CS1_CONFIG 0x80000002 + +/* Define both UARTs but they are not easily accessible. + */ + +static struct resource mi424wr_uart_resources[] = { + { + .start = IXP4XX_UART1_BASE_PHYS, + .end = IXP4XX_UART1_BASE_PHYS + 0x0fff, + .flags = IORESOURCE_MEM, + }, + { + .start = IXP4XX_UART2_BASE_PHYS, + .end = IXP4XX_UART2_BASE_PHYS + 0x0fff, + .flags = IORESOURCE_MEM, + } +}; + + +static struct plat_serial8250_port mi424wr_uart_platform_data[] = { + { + .mapbase = IXP4XX_UART1_BASE_PHYS, + .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET, + .irq = IRQ_IXP4XX_UART1, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, + { + .mapbase = IXP4XX_UART2_BASE_PHYS, + .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, + .irq = IRQ_IXP4XX_UART2, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, + { }, +}; + +static struct platform_device mi424wr_uart_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev.platform_data = mi424wr_uart_platform_data, + .num_resources = ARRAY_SIZE(mi424wr_uart_resources), + .resource = mi424wr_uart_resources, +}; + +static struct flash_platform_data mi424wr_flash_data = { + .map_name = "cfi_probe", + .width = 2, +}; + +static struct resource mi424wr_flash_resource = { + .flags = IORESOURCE_MEM, +}; + +static struct platform_device mi424wr_flash = { + .name = "IXP4XX-Flash", + .id = 0, + .dev.platform_data = &mi424wr_flash_data, + .num_resources = 1, + .resource = &mi424wr_flash_resource, +}; + +static int mi424wr_spi_boardinfo_setup(struct spi_board_info *bi, + struct spi_master *master, void *data) +{ + + strlcpy(bi->modalias, "spi-ks8995", sizeof(bi->modalias)); + + bi->max_speed_hz = 5000000 /* Hz */; + bi->bus_num = master->bus_num; + bi->mode = SPI_MODE_0; + + return 0; +} + +static struct spi_gpio_platform_data mi424wr_spi_bus_data = { + .pin_cs = MI424WR_KSSPI_SELECT, + .pin_clk = MI424WR_KSSPI_CLOCK, + .pin_miso = MI424WR_KSSPI_RXD, + .pin_mosi = MI424WR_KSSPI_TXD, + .cs_activelow = 1, + .no_spi_delay = 1, + .boardinfo_setup = mi424wr_spi_boardinfo_setup, +}; + +static struct gpio_led mi424wr_gpio_led[] = { + { + .name = "moca-wan", /* green led */ + .gpio = MI424WR_MOCA_WAN_LED, + .active_low = 0, + } +}; + +static struct gpio_led_platform_data mi424wr_gpio_leds_data = { + .num_leds = 1, + .leds = mi424wr_gpio_led, +}; + +static struct platform_device mi424wr_gpio_leds = { + .name = "leds-gpio", + .id = -1, + .dev.platform_data = &mi424wr_gpio_leds_data, +}; + +static uint16_t latch_value = MI424WR_LATCH_DEFAULT; +static uint16_t __iomem *iobase; + +static void mi424wr_latch_set_led(u8 bit, enum led_brightness value) +{ + + if (((MI424WR_LATCH_MASK >> bit) & 1) ^ (value == LED_OFF)) + latch_value &= ~(0x1 << bit); + else + latch_value |= (0x1 << bit); + + __raw_writew(latch_value, iobase); + +} + +static struct latch_led mi424wr_latch_led[] = { + { + .name = "power-alarm", + .bit = MI424WR_LATCH_ALARM_LED, + }, + { + .name = "power-ok", + .bit = MI424WR_LATCH_POWER_LED, + }, + { + .name = "wireless", /* green led */ + .bit = MI424WR_LATCH_WIRELESS_LED, + }, + { + .name = "inet-down", /* red led */ + .bit = MI424WR_LATCH_INET_DOWN_LED, + }, + { + .name = "inet-up", /* green led */ + .bit = MI424WR_LATCH_INET_OK_LED, + }, + { + .name = "moca-lan", /* green led */ + .bit = MI424WR_LATCH_MOCA_LAN_LED, + }, + { + .name = "wan-alarm", /* red led */ + .bit = MI424WR_LATCH_WAN_ALARM_LED, + } +}; + +static struct latch_led_platform_data mi424wr_latch_leds_data = { + .num_leds = ARRAY_SIZE(mi424wr_latch_led), + .mem = 0x51000000, + .leds = mi424wr_latch_led, + .set_led = mi424wr_latch_set_led, +}; + +static struct platform_device mi424wr_latch_leds = { + .name = "leds-latch", + .id = -1, + .dev.platform_data = &mi424wr_latch_leds_data, +}; + +static struct platform_device mi424wr_spi_bus = { + .name = "spi-gpio", + .id = 0, + .dev.platform_data = &mi424wr_spi_bus_data, +}; + +static struct eth_plat_info mi424wr_npeb_data = { + .phy = 17, /* KS8721 */ + .rxq = 3, + .txreadyq = 20, +}; + +static struct eth_plat_info mi424wr_npec_data = { + .phy = IXP4XX_ETH_PHY_MAX_ADDR, + .phy_mask = 0x1e, /* ports 1-4 of the KS8995 switch */ + .rxq = 4, + .txreadyq = 21, +}; + +static struct platform_device mi424wr_npe_devices[] = { + { + .name = "ixp4xx_eth", + .id = IXP4XX_ETH_NPEC, + .dev.platform_data = &mi424wr_npec_data, + }, { + .name = "ixp4xx_eth", + .id = IXP4XX_ETH_NPEB, + .dev.platform_data = &mi424wr_npeb_data, + } +}; + +static struct platform_device *mi424wr_devices[] __initdata = { + &mi424wr_uart_device, + &mi424wr_flash, + &mi424wr_gpio_leds, + &mi424wr_latch_leds, + &mi424wr_spi_bus, + &mi424wr_npe_devices[0], + &mi424wr_npe_devices[1], +}; + +static void __init mi424wr_init(void) +{ + ixp4xx_sys_init(); + + mi424wr_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); + mi424wr_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_8M - 1; + + *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE; + *IXP4XX_EXP_CS1 = MI424WR_CS1_CONFIG; + + /* configure button as input + */ + gpio_line_config(MI424WR_BUTTON_GPIO, IXP4XX_GPIO_IN); + + /* Initialize LEDs and enables PCI bus. + */ + iobase = ioremap_nocache(IXP4XX_EXP_BUS_BASE(1), 0x1000); + __raw_writew(latch_value, iobase); + + platform_add_devices(mi424wr_devices, ARRAY_SIZE(mi424wr_devices)); +} + + +MACHINE_START(MI424WR, "Actiontec MI424WR") + /* Maintainer: Jose Vasconcellos */ + .phys_io = IXP4XX_UART2_BASE_PHYS, + .io_pg_offst = ((IXP4XX_UART2_BASE_VIRT) >> 18) & 0xfffc, + .map_io = ixp4xx_map_io, + .init_irq = ixp4xx_init_irq, + .timer = &ixp4xx_timer, + .boot_params = 0x0100, + .init_machine = mi424wr_init, +MACHINE_END + --- a/arch/arm/mach-ixp4xx/Makefile +++ b/arch/arm/mach-ixp4xx/Makefile @@ -23,6 +23,7 @@ obj-pci-$(CONFIG_MACH_COMPEX) += ixdp42 obj-pci-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-pci.o obj-pci-$(CONFIG_MACH_AP1000) += ixdp425-pci.o obj-pci-$(CONFIG_MACH_TW5334) += tw5334-pci.o +obj-pci-$(CONFIG_MACH_MI424WR) += mi424wr-pci.o obj-y += common.o @@ -45,6 +46,7 @@ obj-$(CONFIG_MACH_COMPEX) += compex-setu obj-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-setup.o obj-$(CONFIG_MACH_AP1000) += ap1000-setup.o obj-$(CONFIG_MACH_TW5334) += tw5334-setup.o +obj-$(CONFIG_MACH_MI424WR) += mi424wr-setup.o obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o --- a/arch/arm/mach-ixp4xx/Kconfig +++ b/arch/arm/mach-ixp4xx/Kconfig @@ -235,6 +235,13 @@ config MACH_GTWX5715 "High Speed" UART is n/c (as far as I can tell) 20 Pin ARM/Xscale JTAG interface on J2 +config MACH_MI424WR + bool "Actiontec MI424WR" + depends on ARCH_IXP4XX + select PCI + help + Add support for the Actiontec MI424-WR. + comment "IXP4xx Options" config IXP4XX_INDIRECT_PCI --- a/arch/arm/configs/ixp4xx_defconfig +++ b/arch/arm/configs/ixp4xx_defconfig @@ -172,6 +172,7 @@ CONFIG_MACH_FSG=y CONFIG_CPU_IXP46X=y CONFIG_CPU_IXP43X=y CONFIG_MACH_GTWX5715=y +CONFIG_MACH_MI424WR=y # # IXP4xx Options