# mac80211 configuration

choice
	prompt "b43 firmware version"
	depends on PACKAGE_kmod-b43
	default B43_STABLE
	help
	  This option allows you to select the version of the b43 firmware.

config B43_STABLE
	bool "4.150.10.5 (stable)"
	help
	  Stable firmware for BCM43xx devices.

	  If unsure, select this.

config B43_EXPERIMENTAL
	bool "4.178.10.4 (experimental)"
	help
	  Experimental firmware for BCM43xx devices.

	  This firmware is not tested as much as the "stable" firmware.

	  If unsure, select the "stable" firmware.

config B43_OPENFIRMWARE
	bool "Open FirmWare for WiFi networks"
	help
	  Opensource firmware for BCM43xx devices.

	  Do _not_ select this, unless you know what you are doing.
	  The Opensource firmware is not suitable for embedded devices, yet.
	  It does not support QoS, which is bad for AccessPoints.
	  It does not support hardware crypto acceleration, which is a showstopper
	  for embedded devices with low CPU resources.

	  If unsure, select the "stable" firmware.

endchoice

config B43_FW_SQUASH
	bool "Remove unnecessary firmware files"
	depends on PACKAGE_kmod-b43 && !B43_OPENFIRMWARE
	help
	  This options allows you to remove unnecessary b43 firmware files
	  from the final rootfs image. This can reduce the rootfs size by
	  up to 200k.

	  Do _NOT_ use this option, if you don't know the core revision
	  and/or PHY type of your wireless chip.

	  If unsure, say N.

config B43_FW_SQUASH_COREREVS
	string "Core revisions to include"
	depends on PACKAGE_kmod-b43 && B43_FW_SQUASH
	default "5,6,7,8,9,10"
	help
	  This is a comma seperated list of core revision numbers.
	  Example (keep files for rev5 only):
	         5
	  Example (keep files for rev5 and rev11):
	         5,11

config B43_FW_SQUASH_PHYTYPES
	string "PHY types to include"
	depends on PACKAGE_kmod-b43 && B43_FW_SQUASH
	default "G,LP,N"
	help
	  This is a comma seperated list of PHY types:
	  A         => A-PHY
	  AG        => Dual A-PHY G-PHY
	  G         => G-PHY
	  LP        => LP-PHY
	  N         => N-PHY

	  Example (keep files for G-PHY only):
	         G
	  Example (keep files for G-PHY and N-PHY):
	         G,N