Index: linux-2.6.25.17/drivers/mmc/host/gpiommc.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 +++ linux-2.6.25.17/drivers/mmc/host/gpiommc.c 2008-10-18 23:33:54.000000000 +0200 @@ -0,0 +1,605 @@ +/* + * Driver an MMC/SD card on a bitbanging GPIO SPI bus. + * This module hooks up the mmc_spi and spi_gpio modules and also + * provides a configfs interface. + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + + +#define PFX "gpio-mmc: " + + +struct gpiommc_device { + struct platform_device *pdev; + struct platform_device *spi_pdev; + struct spi_board_info boardinfo; +}; + + +MODULE_DESCRIPTION("GPIO based MMC driver"); +MODULE_LICENSE("GPL"); + + +static int gpiommc_boardinfo_setup(struct spi_board_info *bi, + struct spi_master *master, + void *data) +{ + struct gpiommc_device *d = data; + struct gpiommc_platform_data *pdata = d->pdev->dev.platform_data; + + /* Bind the SPI master to the MMC-SPI host driver. */ + strlcpy(bi->modalias, "mmc_spi", sizeof(bi->modalias)); + + bi->max_speed_hz = pdata->max_bus_speed; + bi->bus_num = master->bus_num; + bi->mode = pdata->mode; + + return 0; +} + +static int gpiommc_probe(struct platform_device *pdev) +{ + struct gpiommc_platform_data *mmc_pdata = pdev->dev.platform_data; + struct spi_gpio_platform_data spi_pdata; + struct gpiommc_device *d; + int err; + + err = -ENXIO; + if (!mmc_pdata) + goto error; + +#ifdef CONFIG_MMC_SPI_MODULE + err = request_module("mmc_spi"); + if (err) { + printk(KERN_WARNING PFX + "Failed to request mmc_spi module.\n"); + } +#endif /* CONFIG_MMC_SPI_MODULE */ + + /* Allocate the GPIO-MMC device */ + err = -ENOMEM; + d = kzalloc(sizeof(*d), GFP_KERNEL); + if (!d) + goto error; + d->pdev = pdev; + + /* Create the SPI-GPIO device */ + d->spi_pdev = platform_device_alloc(SPI_GPIO_PLATDEV_NAME, + spi_gpio_next_id()); + if (!d->spi_pdev) + goto err_free_d; + + memset(&spi_pdata, 0, sizeof(spi_pdata)); + spi_pdata.pin_clk = mmc_pdata->pins.gpio_clk; + spi_pdata.pin_miso = mmc_pdata->pins.gpio_do; + spi_pdata.pin_mosi = mmc_pdata->pins.gpio_di; + spi_pdata.pin_cs = mmc_pdata->pins.gpio_cs; + spi_pdata.cs_activelow = mmc_pdata->pins.cs_activelow; + spi_pdata.no_spi_delay = mmc_pdata->no_spi_delay; + spi_pdata.boardinfo_setup = gpiommc_boardinfo_setup; + spi_pdata.boardinfo_setup_data = d; + + err = platform_device_add_data(d->spi_pdev, &spi_pdata, + sizeof(spi_pdata)); + if (err) + goto err_free_pdev; + err = platform_device_add(d->spi_pdev); + if (err) + goto err_free_pdata; + platform_set_drvdata(pdev, d); + + printk(KERN_INFO PFX "MMC-Card \"%s\" " + "attached to GPIO pins di=%u, do=%u, clk=%u, cs=%u\n", + mmc_pdata->name, mmc_pdata->pins.gpio_di, + mmc_pdata->pins.gpio_do, + mmc_pdata->pins.gpio_clk, + mmc_pdata->pins.gpio_cs); + + return 0; + +err_free_pdata: + kfree(d->spi_pdev->dev.platform_data); + d->spi_pdev->dev.platform_data = NULL; +err_free_pdev: + platform_device_put(d->spi_pdev); +err_free_d: + kfree(d); +error: + return err; +} + +static int gpiommc_remove(struct platform_device *pdev) +{ + struct gpiommc_device *d = platform_get_drvdata(pdev); + struct gpiommc_platform_data *pdata = d->pdev->dev.platform_data; + + platform_device_unregister(d->spi_pdev); + printk(KERN_INFO PFX "GPIO based MMC-Card \"%s\" removed\n", + pdata->name); + platform_device_put(d->spi_pdev); + + return 0; +} + +#ifdef CONFIG_GPIOMMC_CONFIGFS + +/* A device that was created through configfs */ +struct gpiommc_configfs_device { + struct config_item item; + /* The platform device, after registration. */ + struct platform_device *pdev; + /* The configuration */ + struct gpiommc_platform_data pdata; +}; + +#define GPIO_INVALID -1 + +static inline bool gpiommc_is_registered(struct gpiommc_configfs_device *dev) +{ + return (dev->pdev != NULL); +} + +static inline struct gpiommc_configfs_device *ci_to_gpiommc(struct config_item *item) +{ + return item ? container_of(item, struct gpiommc_configfs_device, item) : NULL; +} + +static struct configfs_attribute gpiommc_attr_DI = { + .ca_owner = THIS_MODULE, + .ca_name = "gpio_data_in", + .ca_mode = S_IRUGO | S_IWUSR, +}; + +static struct configfs_attribute gpiommc_attr_DO = { + .ca_owner = THIS_MODULE, + .ca_name = "gpio_data_out", + .ca_mode = S_IRUGO | S_IWUSR, +}; + +static struct configfs_attribute gpiommc_attr_CLK = { + .ca_owner = THIS_MODULE, + .ca_name = "gpio_clock", + .ca_mode = S_IRUGO | S_IWUSR, +}; + +static struct configfs_attribute gpiommc_attr_CS = { + .ca_owner = THIS_MODULE, + .ca_name = "gpio_chipselect", + .ca_mode = S_IRUGO | S_IWUSR, +}; + +static struct configfs_attribute gpiommc_attr_CS_activelow = { + .ca_owner = THIS_MODULE, + .ca_name = "gpio_chipselect_activelow", + .ca_mode = S_IRUGO | S_IWUSR, +}; + +static struct configfs_attribute gpiommc_attr_spimode = { + .ca_owner = THIS_MODULE, + .ca_name = "spi_mode", + .ca_mode = S_IRUGO | S_IWUSR, +}; + +static struct configfs_attribute gpiommc_attr_spidelay = { + .ca_owner = THIS_MODULE, + .ca_name = "spi_delay", + .ca_mode = S_IRUGO | S_IWUSR, +}; + +static struct configfs_attribute gpiommc_attr_max_bus_speed = { + .ca_owner = THIS_MODULE, + .ca_name = "max_bus_speed", + .ca_mode = S_IRUGO | S_IWUSR, +}; + +static struct configfs_attribute gpiommc_attr_register = { + .ca_owner = THIS_MODULE, + .ca_name = "register", + .ca_mode = S_IRUGO | S_IWUSR, +}; + +static struct configfs_attribute *gpiommc_config_attrs[] = { + &gpiommc_attr_DI, + &gpiommc_attr_DO, + &gpiommc_attr_CLK, + &gpiommc_attr_CS, + &gpiommc_attr_CS_activelow, + &gpiommc_attr_spimode, + &gpiommc_attr_spidelay, + &gpiommc_attr_max_bus_speed, + &gpiommc_attr_register, + NULL, +}; + +static ssize_t gpiommc_config_attr_show(struct config_item *item, + struct configfs_attribute *attr, + char *page) +{ + struct gpiommc_configfs_device *dev = ci_to_gpiommc(item); + ssize_t count = 0; + unsigned int gpio; + int err = 0; + + if (attr == &gpiommc_attr_DI) { + gpio = dev->pdata.pins.gpio_di; + if (gpio == GPIO_INVALID) + count = snprintf(page, PAGE_SIZE, "not configured\n"); + else + count = snprintf(page, PAGE_SIZE, "%u\n", gpio); + goto out; + } + if (attr == &gpiommc_attr_DO) { + gpio = dev->pdata.pins.gpio_do; + if (gpio == GPIO_INVALID) + count = snprintf(page, PAGE_SIZE, "not configured\n"); + else + count = snprintf(page, PAGE_SIZE, "%u\n", gpio); + goto out; + } + if (attr == &gpiommc_attr_CLK) { + gpio = dev->pdata.pins.gpio_clk; + if (gpio == GPIO_INVALID) + count = snprintf(page, PAGE_SIZE, "not configured\n"); + else + count = snprintf(page, PAGE_SIZE, "%u\n", gpio); + goto out; + } + if (attr == &gpiommc_attr_CS) { + gpio = dev->pdata.pins.gpio_cs; + if (gpio == GPIO_INVALID) + count = snprintf(page, PAGE_SIZE, "not configured\n"); + else + count = snprintf(page, PAGE_SIZE, "%u\n", gpio); + goto out; + } + if (attr == &gpiommc_attr_CS_activelow) { + count = snprintf(page, PAGE_SIZE, "%u\n", + dev->pdata.pins.cs_activelow); + goto out; + } + if (attr == &gpiommc_attr_spimode) { + count = snprintf(page, PAGE_SIZE, "%u\n", + dev->pdata.mode); + goto out; + } + if (attr == &gpiommc_attr_spidelay) { + count = snprintf(page, PAGE_SIZE, "%u\n", + !dev->pdata.no_spi_delay); + goto out; + } + if (attr == &gpiommc_attr_max_bus_speed) { + count = snprintf(page, PAGE_SIZE, "%u\n", + dev->pdata.max_bus_speed); + goto out; + } + if (attr == &gpiommc_attr_register) { + count = snprintf(page, PAGE_SIZE, "%u\n", + gpiommc_is_registered(dev)); + goto out; + } + WARN_ON(1); + err = -ENOSYS; +out: + return err ? err : count; +} + +static int gpiommc_do_register(struct gpiommc_configfs_device *dev, + const char *name) +{ + int err; + + if (gpiommc_is_registered(dev)) + return 0; + + if (!gpio_is_valid(dev->pdata.pins.gpio_di) || + !gpio_is_valid(dev->pdata.pins.gpio_do) || + !gpio_is_valid(dev->pdata.pins.gpio_clk) || + !gpio_is_valid(dev->pdata.pins.gpio_cs)) { + printk(KERN_ERR PFX + "configfs: Invalid GPIO pin number(s)\n"); + return -EINVAL; + } + + strlcpy(dev->pdata.name, name, + sizeof(dev->pdata.name)); + + dev->pdev = platform_device_alloc(GPIOMMC_PLATDEV_NAME, + gpiommc_next_id()); + if (!dev->pdev) + return -ENOMEM; + err = platform_device_add_data(dev->pdev, &dev->pdata, + sizeof(dev->pdata)); + if (err) { + platform_device_put(dev->pdev); + return err; + } + err = platform_device_add(dev->pdev); + if (err) { + platform_device_put(dev->pdev); + return err; + } + + return 0; +} + +static void gpiommc_do_unregister(struct gpiommc_configfs_device *dev) +{ + if (!gpiommc_is_registered(dev)) + return; + + platform_device_unregister(dev->pdev); + dev->pdev = NULL; +} + +static ssize_t gpiommc_config_attr_store(struct config_item *item, + struct configfs_attribute *attr, + const char *page, size_t count) +{ + struct gpiommc_configfs_device *dev = ci_to_gpiommc(item); + int err = -EINVAL; + unsigned long data; + + if (attr == &gpiommc_attr_register) { + err = strict_strtoul(page, 10, &data); + if (err) + goto out; + err = -EINVAL; + if (data == 1) + err = gpiommc_do_register(dev, item->ci_name); + if (data == 0) { + gpiommc_do_unregister(dev); + err = 0; + } + goto out; + } + + if (gpiommc_is_registered(dev)) { + /* The rest of the config parameters can only be set + * as long as the device is not registered, yet. */ + err = -EBUSY; + goto out; + } + + if (attr == &gpiommc_attr_DI) { + err = strict_strtoul(page, 10, &data); + if (err) + goto out; + err = -EINVAL; + if (!gpio_is_valid(data)) + goto out; + dev->pdata.pins.gpio_di = data; + err = 0; + goto out; + } + if (attr == &gpiommc_attr_DO) { + err = strict_strtoul(page, 10, &data); + if (err) + goto out; + err = -EINVAL; + if (!gpio_is_valid(data)) + goto out; + dev->pdata.pins.gpio_do = data; + err = 0; + goto out; + } + if (attr == &gpiommc_attr_CLK) { + err = strict_strtoul(page, 10, &data); + if (err) + goto out; + err = -EINVAL; + if (!gpio_is_valid(data)) + goto out; + dev->pdata.pins.gpio_clk = data; + err = 0; + goto out; + } + if (attr == &gpiommc_attr_CS) { + err = strict_strtoul(page, 10, &data); + if (err) + goto out; + err = -EINVAL; + if (!gpio_is_valid(data)) + goto out; + dev->pdata.pins.gpio_cs = data; + err = 0; + goto out; + } + if (attr == &gpiommc_attr_CS_activelow) { + err = strict_strtoul(page, 10, &data); + if (err) + goto out; + err = -EINVAL; + if (data != 0 && data != 1) + goto out; + dev->pdata.pins.cs_activelow = data; + err = 0; + goto out; + } + if (attr == &gpiommc_attr_spimode) { + err = strict_strtoul(page, 10, &data); + if (err) + goto out; + err = -EINVAL; + switch (data) { + case 0: + dev->pdata.mode = SPI_MODE_0; + break; + case 1: + dev->pdata.mode = SPI_MODE_1; + break; + case 2: + dev->pdata.mode = SPI_MODE_2; + break; + case 3: + dev->pdata.mode = SPI_MODE_3; + break; + default: + goto out; + } + err = 0; + goto out; + } + if (attr == &gpiommc_attr_spidelay) { + err = strict_strtoul(page, 10, &data); + if (err) + goto out; + err = -EINVAL; + if (data != 0 && data != 1) + goto out; + dev->pdata.no_spi_delay = !data; + err = 0; + goto out; + } + if (attr == &gpiommc_attr_max_bus_speed) { + err = strict_strtoul(page, 10, &data); + if (err) + goto out; + err = -EINVAL; + if (data > UINT_MAX) + goto out; + dev->pdata.max_bus_speed = data; + err = 0; + goto out; + } + WARN_ON(1); + err = -ENOSYS; +out: + return err ? err : count; +} + +static void gpiommc_config_item_release(struct config_item *item) +{ + struct gpiommc_configfs_device *dev = ci_to_gpiommc(item); + + kfree(dev); +} + +static struct configfs_item_operations gpiommc_config_item_ops = { + .release = gpiommc_config_item_release, + .show_attribute = gpiommc_config_attr_show, + .store_attribute = gpiommc_config_attr_store, +}; + +static struct config_item_type gpiommc_dev_ci_type = { + .ct_item_ops = &gpiommc_config_item_ops, + .ct_attrs = gpiommc_config_attrs, + .ct_owner = THIS_MODULE, +}; + +static struct config_item *gpiommc_make_item(struct config_group *group, + const char *name) +{ + struct gpiommc_configfs_device *dev; + + if (strlen(name) > GPIOMMC_MAX_NAMELEN) { + printk(KERN_ERR PFX "configfs: device name too long\n"); + return NULL; + } + + dev = kzalloc(sizeof(*dev), GFP_KERNEL); + if (!dev) + return NULL; + + config_item_init_type_name(&dev->item, name, + &gpiommc_dev_ci_type); + + /* Assign default configuration */ + dev->pdata.pins.gpio_di = GPIO_INVALID; + dev->pdata.pins.gpio_do = GPIO_INVALID; + dev->pdata.pins.gpio_clk = GPIO_INVALID; + dev->pdata.pins.gpio_cs = GPIO_INVALID; + dev->pdata.pins.cs_activelow = 1; + dev->pdata.mode = SPI_MODE_0; + dev->pdata.no_spi_delay = 0; + dev->pdata.max_bus_speed = 5000000; /* 5 MHz */ + + return &(dev->item); +} + +static void gpiommc_drop_item(struct config_group *group, + struct config_item *item) +{ + struct gpiommc_configfs_device *dev = ci_to_gpiommc(item); + + gpiommc_do_unregister(dev); + kfree(dev); +} + +static struct configfs_group_operations gpiommc_ct_group_ops = { + .make_item = gpiommc_make_item, + .drop_item = gpiommc_drop_item, +}; + +static struct config_item_type gpiommc_ci_type = { + .ct_group_ops = &gpiommc_ct_group_ops, + .ct_owner = THIS_MODULE, +}; + +static struct configfs_subsystem gpiommc_subsys = { + .su_group = { + .cg_item = { + .ci_namebuf = GPIOMMC_PLATDEV_NAME, + .ci_type = &gpiommc_ci_type, + }, + }, + .su_mutex = __MUTEX_INITIALIZER(gpiommc_subsys.su_mutex), +}; + +#endif /* CONFIG_GPIOMMC_CONFIGFS */ + +static struct platform_driver gpiommc_plat_driver = { + .probe = gpiommc_probe, + .remove = gpiommc_remove, + .driver = { + .name = GPIOMMC_PLATDEV_NAME, + .owner = THIS_MODULE, + }, +}; + +int gpiommc_next_id(void) +{ + static atomic_t counter = ATOMIC_INIT(-1); + + return atomic_inc_return(&counter); +} +EXPORT_SYMBOL(gpiommc_next_id); + +static int __init gpiommc_modinit(void) +{ + int err; + + err = platform_driver_register(&gpiommc_plat_driver); + if (err) + return err; + +#ifdef CONFIG_GPIOMMC_CONFIGFS + config_group_init(&gpiommc_subsys.su_group); + err = configfs_register_subsystem(&gpiommc_subsys); + if (err) { + platform_driver_unregister(&gpiommc_plat_driver); + return err; + } +#endif /* CONFIG_GPIOMMC_CONFIGFS */ + + return 0; +} +module_init(gpiommc_modinit); + +static void __exit gpiommc_modexit(void) +{ +#ifdef CONFIG_GPIOMMC_CONFIGFS + configfs_unregister_subsystem(&gpiommc_subsys); +#endif + platform_driver_unregister(&gpiommc_plat_driver); +} +module_exit(gpiommc_modexit); Index: linux-2.6.25.17/drivers/mmc/host/Kconfig =================================================================== --- linux-2.6.25.17.orig/drivers/mmc/host/Kconfig 2008-10-18 23:30:41.000000000 +0200 +++ linux-2.6.25.17/drivers/mmc/host/Kconfig 2008-10-18 23:32:54.000000000 +0200 @@ -130,3 +130,27 @@ config MMC_SPI If unsure, or if your system has no SPI master driver, say N. +config GPIOMMC + tristate "MMC/SD over GPIO-based SPI" + depends on MMC && MMC_SPI && SPI_GPIO + help + This driver hooks up the mmc_spi and spi_gpio modules so that + MMC/SD cards can be used on a GPIO based bus by bitbanging + the SPI protocol in software. + + This driver provides a configfs interface to dynamically create + and destroy GPIO-based MMC/SD card devices. It also provides + a platform device interface API. + See Documentation/gpiommc.txt for details. + + The module will be called gpiommc. + + If unsure, say N. + +config GPIOMMC_CONFIGFS + bool + depends on GPIOMMC && CONFIGFS_FS + default y + help + This option automatically enables configfs support for gpiommc + if configfs is available. Index: linux-2.6.25.17/drivers/mmc/host/Makefile =================================================================== --- linux-2.6.25.17.orig/drivers/mmc/host/Makefile 2008-10-18 23:30:41.000000000 +0200 +++ linux-2.6.25.17/drivers/mmc/host/Makefile 2008-10-18 23:32:54.000000000 +0200 @@ -17,4 +17,4 @@ obj-$(CONFIG_MMC_OMAP) += omap.o obj-$(CONFIG_MMC_AT91) += at91_mci.o obj-$(CONFIG_MMC_TIFM_SD) += tifm_sd.o obj-$(CONFIG_MMC_SPI) += mmc_spi.o - +obj-$(CONFIG_GPIOMMC) += gpiommc.o Index: linux-2.6.25.17/include/linux/mmc/gpiommc.h =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 +++ linux-2.6.25.17/include/linux/mmc/gpiommc.h 2008-10-18 23:34:21.000000000 +0200 @@ -0,0 +1,69 @@ +/* + * Device driver for MMC/SD cards driven over a GPIO bus. + * + * Licensed under the GNU/GPL version 2. + */ +#ifndef LINUX_GPIOMMC_H_ +#define LINUX_GPIOMMC_H_ + +#include + + +#define GPIOMMC_MAX_NAMELEN 15 +#define GPIOMMC_MAX_NAMELEN_STR __stringify(GPIOMMC_MAX_NAMELEN) + +/** + * struct gpiommc_pins - Hardware pin assignments + * + * @gpio_di: The GPIO number of the DATA IN pin + * @gpio_do: The GPIO number of the DATA OUT pin + * @gpio_clk: The GPIO number of the CLOCK pin + * @gpio_cs: The GPIO number of the CHIPSELECT pin + * @cs_activelow: If true, the chip is considered selected if @gpio_cs is low. + */ +struct gpiommc_pins { + unsigned int gpio_di; + unsigned int gpio_do; + unsigned int gpio_clk; + unsigned int gpio_cs; + bool cs_activelow; +}; + +/** + * struct gpiommc_platform_data - Platform data for a MMC-over-SPI-GPIO device. + * + * @name: The unique name string of the device. + * @pins: The hardware pin assignments. + * @mode: The hardware mode. This is either SPI_MODE_0, + * SPI_MODE_1, SPI_MODE_2 or SPI_MODE_3. See the SPI documentation. + * @no_spi_delay: Do not use delays in the lowlevel SPI bitbanging code. + * This is not standards compliant, but may be required for some + * embedded machines to gain reasonable speed. + * @max_bus_speed: The maximum speed of the SPI bus, in Hertz. + */ +struct gpiommc_platform_data { + char name[GPIOMMC_MAX_NAMELEN + 1]; + struct gpiommc_pins pins; + u8 mode; + bool no_spi_delay; + unsigned int max_bus_speed; +}; + +/** + * GPIOMMC_PLATDEV_NAME - The platform device name string. + * + * The name string that has to be used for platform_device_alloc + * when allocating a gpiommc device. + */ +#define GPIOMMC_PLATDEV_NAME "gpiommc" + +/** + * gpiommc_next_id - Get another platform device ID number. + * + * This returns the next platform device ID number that has to be used + * for platform_device_alloc. The ID is opaque and should not be used for + * anything else. + */ +int gpiommc_next_id(void); + +#endif /* LINUX_GPIOMMC_H_ */ Index: linux-2.6.25.17/Documentation/gpiommc.txt =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 +++ linux-2.6.25.17/Documentation/gpiommc.txt 2008-10-18 23:32:54.000000000 +0200 @@ -0,0 +1,97 @@ +GPIOMMC - Driver for an MMC/SD card on a bitbanging GPIO SPI bus +================================================================ + +The gpiommc module hooks up the mmc_spi and spi_gpio modules for running an +MMC or SD card on GPIO pins. + +Two interfaces for registering a new MMC/SD card device are provided: +A static platform-device based mechanism and a dynamic configfs based interface. + + +Registering devices via platform-device +======================================= + +The platform-device interface is used for registering MMC/SD devices that are +part of the hardware platform. This is most useful only for embedded machines +with MMC/SD devices statically connected to the platform GPIO bus. + +The data structures are declared in . + +To register a new device, define an instance of struct gpiommc_platform_data. +This structure holds any information about how the device is hooked up to the +GPIO pins and what hardware modes the device supports. See the docbook-style +documentation in the header file for more information on the struct fields. + +Then allocate a new instance of a platform device by doing: + + pdev = platform_device_alloc(GPIOMMC_PLATDEV_NAME, gpiommc_next_id()); + +This will allocate the platform device data structures and hook it up to the +gpiommc driver. +Then add the gpiommc_platform_data to the platform device. + + err = platform_device_add_data(pdev, pdata, sizeof(struct gpiommc_platform_data)); + +You may free the local instance of struct gpiommc_platform_data now. (So the +struct may be allocated on the stack, too). +Now simply register the platform device. + + err = platform_device_add(pdev); + +Done. The gpiommc probe routine will be invoked now and you should see a kernel +log message for the added device. + + +Registering devices via configfs +================================ + +MMC/SD cards connected via GPIO often are a pretty dynamic thing, as for example +selfmade hacks for soldering an MMC/SD card to standard GPIO pins on embedded +hardware are a common situation. +So we provide a dynamic interface to conveniently handle adding and removing +devices from userspace, without the need to recompile the kernel. + +The "gpiommc" subdirectory at the configfs mountpoint is used for handling +the dynamic configuration. + +To create a new device, it must first be allocated with mkdir. +The following command will allocate a device named "my_mmc": + mkdir /config/gpiommc/my_mmc + +There are several configuration files available in the new +/config/gpiommc/my_mmc/ directory: + +gpio_data_in = The SPI data-IN GPIO pin number. +gpio_data_out = The SPI data-OUT GPIO pin number. +gpio_clock = The SPI Clock GPIO pin number. +gpio_chipselect = The SPI Chipselect GPIO pin number. +gpio_chipselect_activelow = Boolean. If 0, Chipselect is active-HIGH. + If 1, Chipselect is active-LOW. +spi_mode = The SPI data mode. Can be 0-3. +spi_delay = Enable all delays in the lowlevel bitbanging. +max_bus_speed = The maximum SPI bus speed. In Hertz. + +register = Not a configuration parameter. + Used to register the configured card + with the kernel. + +The device must first get configured and then registered by writing "1" to +the "register" file. +The configuration parameters "gpio_data_in", "gpio_data_out", "gpio_clock" +and "gpio_chipselect" are essential and _must_ be configured before writing +"1" to the "register" file. The registration will fail, otherwise. + +The default values for the other parameters are: +gpio_chipselect_activelow = 1 (CS active-LOW) +spi_mode = 0 (SPI_MODE_0) +spi_delay = 1 (enabled) +max_bus_speed = 5000000 (5 Mhz) + +Configuration values can not be changed after registration. To unregister +the device, write a "0" to the "register" file. The configuration can be +changed again after unregistering. + +To completely remove the device, simply rmdir the directory +(/config/gpiommc/my_mmc in this example). +There's no need to first unregister the device before removing it. That will +be done automatically.