From: Helmut Schaa Date: Sat, 28 Aug 2010 09:25:44 +0000 (+0300) Subject: hostapd: enable STBC only for STBC capable STAs X-Git-Url: http://hostap.epitest.fi/gitweb/gitweb.cgi?p=hostap.git;a=commitdiff_plain;h=36af1c7d31bdc5ba4dacacbf32d3c7585665ae2b hostapd: enable STBC only for STBC capable STAs hostapd simply used its own STBC configuration in the STA's HT caps. This resulted in TX STBC being used for STAs not supporting RX STBC, which in turn resulted in the STA not receiving anything. Fix this by handling the STBC flags in the same way mac80211 does. Mask out RX STBC if we don't support TX STBC and vice versa. Tested only with the nl80211 driver and a STBC incapable STA. Signed-off-by: Helmut Schaa --- --- a/src/ap/ieee802_11_ht.c +++ b/src/ap/ieee802_11_ht.c @@ -256,7 +256,15 @@ void hostapd_get_ht_capab(struct hostapd cap &= hapd->iconf->ht_capab; cap |= (hapd->iconf->ht_capab & HT_CAP_INFO_SMPS_DISABLED); - /* FIXME: Rx STBC needs to be handled specially */ - cap |= (hapd->iconf->ht_capab & HT_CAP_INFO_RX_STBC_MASK); + /* + * STBC needs to be handled specially + * if we don't support RX STBC, mask out TX STBC in the STA's HT caps + * if we don't support TX STBC, mask out RX STBC in the STA's HT caps + */ + if (!(hapd->iconf->ht_capab & HT_CAP_INFO_RX_STBC_MASK)) + cap &= ~HT_CAP_INFO_TX_STBC; + if (!(hapd->iconf->ht_capab & HT_CAP_INFO_TX_STBC)) + cap &= ~HT_CAP_INFO_RX_STBC_MASK; + neg_ht_cap->ht_capabilities_info = host_to_le16(cap); }