qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-23 22:24:39 +02:00
Code
master
openwrt-xburst/target/linux/lantiq/patches-3.7
History
blogic d8df31cd7d [lantiq] Setting the MDC clock to 2.5MHz and changing the mii mode to rgmii seems to fix the communication issues with the ar8316 switch. (ticket #11143) 
Tested only on the wbmr-hp-g300h, could affect/break other devices.

Signed-off-by: Sebastian Mayr <sebastian.mayr@student.uibk.ac.at>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34837 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-21 20:04:04 +00:00
..
0001-MIPS-lantiq-unbreak-devicetree-init.patch [lantiq] add linux-v3.7 2012-12-15 01:59:45 +00:00
0002-MIPS-lantiq-fix-bootselect-bits-on-XRX200-SoC.patch [lantiq] add linux-v3.7 2012-12-15 01:59:45 +00:00
0003-MIPS-lantiq-verbose-init-of-dma-core.patch [lantiq] add linux-v3.7 2012-12-15 01:59:45 +00:00
0004-MIPS-lantiq-adds-xrx200-ethernet-clock-definition.patch [lantiq] add linux-v3.7 2012-12-15 01:59:45 +00:00
0005-MIPS-lantiq-adds-code-for-booting-GPHY.patch [lantiq] add linux-v3.7 2012-12-15 01:59:45 +00:00
0006-MIPS-lantiq-adds-GPHY-firmware-loader.patch [lantiq] add linux-v3.7 2012-12-15 01:59:45 +00:00
0100-MIPS-lantiq-honour-model-property-inside-devicetree-.patch [lantiq] add linux-v3.7 2012-12-15 01:59:45 +00:00
0101-MIPS-lantiq-adds-support-for-SVIP-SoC-Family.patch [lantiq] add linux-v3.7 2012-12-15 01:59:45 +00:00
0102-MIPS-lantiq-add-GPHY-clock-gate-bits.patch [lantiq] add linux-v3.7 2012-12-15 01:59:45 +00:00
0103-MIPS-lantiq-adds-static-clock-for-PP32.patch [lantiq] add linux-v3.7 2012-12-15 01:59:45 +00:00
0104-MIPS-lantiq-adds-4dword-burst-length-for-dma.patch [lantiq] add linux-v3.7 2012-12-15 01:59:45 +00:00
0105-MIPS-lantiq-rework-external-irq-code.patch [lantiq] add linux-v3.7 2012-12-15 01:59:45 +00:00
0106-MIPS-lantiq-adds-minimal-dcdc-driver.patch [lantiq] add linux-v3.7 2012-12-15 01:59:45 +00:00
0107-PINCTRL-lantiq-pinconf-uses-port-instead-of-pin.patch [lantiq] add linux-v3.7 2012-12-15 01:59:45 +00:00
0108-PINCTRL-lantiq-fixes.patch [lantiq] add linux-v3.7 2012-12-15 01:59:45 +00:00
0109-GPIO-MIPS-add-gpio-driver-for-falcon-SoC.patch [lantiq] add linux-v3.7 2012-12-15 01:59:45 +00:00
0110-Document-devicetree-add-OF-documents-for-lantiq-seri.patch [lantiq] add linux-v3.7 2012-12-15 01:59:45 +00:00
0111-MTD-MIPS-lantiq-Add-NAND-support-on-Lantiq-FALCON-So.patch [lantiq] add linux-v3.7 2012-12-15 01:59:45 +00:00
0112-MTD-lantiq-xway-fix-NAND-reset-timeout-handling.patch [lantiq] add linux-v3.7 2012-12-15 01:59:45 +00:00
0113-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch [lantiq] add linux-v3.7 2012-12-15 01:59:45 +00:00
0114-SPI-MIPS-lantiq-adds-spi-xway.patch [lantiq] add linux-v3.7 2012-12-15 01:59:45 +00:00
0115-NET-PHY-adds-driver-for-lantiq-PHY11G.patch [lantiq] add missing PHY_BASIC_FEATURES to 100mbit phys 2012-12-21 14:41:35 +00:00
0116-NET-MIPS-lantiq-update-etop-driver-for-devicetree.patch [lantiq] add linux-v3.7 2012-12-15 01:59:45 +00:00
0117-NET-MIPS-lantiq-adds-xrx200-net.patch [lantiq] add phy-reset gpio handling to xrx200-net 2012-12-21 13:47:44 +00:00
0118-owrt-adds-PHY11G-firmware-blobs.patch [lantiq] refresh patch and install v1.1 gphy blobs 2012-12-21 13:47:35 +00:00
0119-owrt-ATM-adds-lantiq-specific-hacks.patch [lantiq] add linux-v3.7 2012-12-15 01:59:45 +00:00
0120-owrt-generic-dtb-image-hack.patch [lantiq] add linux-v3.7 2012-12-15 01:59:45 +00:00
0121-owrt-lantiq-dtb-image-hack.patch [lantiq] add linux-v3.7 2012-12-15 01:59:45 +00:00
0122-MIPS-lantiq-adds-pcie-driver.patch [lantiq] add linux-v3.7 2012-12-15 01:59:45 +00:00
0123-USB-fix-roothub-for-IFXHCD.patch [lantiq] add linux-v3.7 2012-12-15 01:59:45 +00:00
0124-pci_fix.patch [lantiq] add linux-v3.7 2012-12-15 01:59:45 +00:00
0125-falcon-pad.patch [lantiq] make pinctrl-falcon honour status="disbaled"; 2012-12-16 10:03:28 +00:00
0126-lantiq_etop-Change-MDIO-clock.patch [lantiq] Setting the MDC clock to 2.5MHz and changing the mii mode to rgmii seems to fix the communication issues with the ar8316 switch. (ticket #11143) 2012-12-21 20:04:04 +00:00
0127-lantiq_etop-Fix-supported-modes-flag.patch [lantiq] Setting the MDC clock to 2.5MHz and changing the mii mode to rgmii seems to fix the communication issues with the ar8316 switch. (ticket #11143) 2012-12-21 20:04:04 +00:00
0300-owrt-mtd-split.patch [lantiq] add linux-v3.7 2012-12-15 01:59:45 +00:00
0301-gptu.patch [lantiq] fix gptu clocks 2012-12-19 15:17:31 +00:00
0302-wifi-eep.patch [lantiq] add linux-v3.7 2012-12-15 01:59:45 +00:00
0303-vmmc.patch [lantiq] add linux-v3.7 2012-12-15 01:59:45 +00:00
0304-etop.patch [lantiq] adds a fix for ar8216 mii detection on etop driver 2012-12-19 16:20:24 +00:00