mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-11-15 09:20:37 +02:00
0008c16f33
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13022 3c298f89-4303-0410-b956-a3cf2f4a3e73
130 lines
3.3 KiB
C
130 lines
3.3 KiB
C
/*
|
|
* Sonics Silicon Backplane
|
|
* Broadcom EXTIF core driver
|
|
*
|
|
* Copyright 2005, Broadcom Corporation
|
|
* Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
|
|
* Copyright 2006, 2007, Felix Fietkau <nbd@openwrt.org>
|
|
* Copyright 2007, Aurelien Jarno <aurelien@aurel32.net>
|
|
*
|
|
* Licensed under the GNU/GPL. See COPYING for details.
|
|
*/
|
|
|
|
#include <linux/serial.h>
|
|
#include <linux/serial_core.h>
|
|
#include <linux/serial_reg.h>
|
|
|
|
#include "ssb_private.h"
|
|
|
|
|
|
static inline u32 extif_read32(struct ssb_extif *extif, u16 offset)
|
|
{
|
|
return ssb_read32(extif->dev, offset);
|
|
}
|
|
|
|
static inline void extif_write32(struct ssb_extif *extif, u16 offset, u32 value)
|
|
{
|
|
ssb_write32(extif->dev, offset, value);
|
|
}
|
|
|
|
static inline void extif_write32_masked(struct ssb_extif *extif, u16 offset,
|
|
u32 mask, u32 value)
|
|
{
|
|
value &= mask;
|
|
value |= extif_read32(extif, offset) & ~mask;
|
|
extif_write32(extif, offset, value);
|
|
}
|
|
|
|
#ifdef CONFIG_SSB_SERIAL
|
|
static bool serial_exists(u8 *regs)
|
|
{
|
|
u8 save_mcr, msr = 0;
|
|
|
|
if (regs) {
|
|
save_mcr = regs[UART_MCR];
|
|
regs[UART_MCR] = (UART_MCR_LOOP | UART_MCR_OUT2 | UART_MCR_RTS);
|
|
msr = regs[UART_MSR] & (UART_MSR_DCD | UART_MSR_RI
|
|
| UART_MSR_CTS | UART_MSR_DSR);
|
|
regs[UART_MCR] = save_mcr;
|
|
}
|
|
return (msr == (UART_MSR_DCD | UART_MSR_CTS));
|
|
}
|
|
|
|
int ssb_extif_serial_init(struct ssb_extif *extif, struct ssb_serial_port *ports)
|
|
{
|
|
u32 i, nr_ports = 0;
|
|
|
|
/* Disable GPIO interrupt initially */
|
|
extif_write32(extif, SSB_EXTIF_GPIO_INTPOL, 0);
|
|
extif_write32(extif, SSB_EXTIF_GPIO_INTMASK, 0);
|
|
|
|
for (i = 0; i < 2; i++) {
|
|
void __iomem *uart_regs;
|
|
|
|
uart_regs = ioremap_nocache(SSB_EUART, 16);
|
|
if (uart_regs) {
|
|
uart_regs += (i * 8);
|
|
|
|
if (serial_exists(uart_regs) && ports) {
|
|
extif_write32(extif, SSB_EXTIF_GPIO_INTMASK, 2);
|
|
|
|
nr_ports++;
|
|
ports[i].regs = uart_regs;
|
|
ports[i].irq = 2;
|
|
ports[i].baud_base = 13500000;
|
|
ports[i].reg_shift = 0;
|
|
}
|
|
iounmap(uart_regs);
|
|
}
|
|
}
|
|
return nr_ports;
|
|
}
|
|
#endif /* CONFIG_SSB_SERIAL */
|
|
|
|
void ssb_extif_timing_init(struct ssb_extif *extif, unsigned long ns)
|
|
{
|
|
u32 tmp;
|
|
|
|
/* Initialize extif so we can get to the LEDs and external UART */
|
|
extif_write32(extif, SSB_EXTIF_PROG_CFG, SSB_EXTCFG_EN);
|
|
|
|
/* Set timing for the flash */
|
|
tmp = DIV_ROUND_UP(10, ns) << SSB_PROG_WCNT_3_SHIFT;
|
|
tmp |= DIV_ROUND_UP(40, ns) << SSB_PROG_WCNT_1_SHIFT;
|
|
tmp |= DIV_ROUND_UP(120, ns);
|
|
extif_write32(extif, SSB_EXTIF_PROG_WAITCNT, tmp);
|
|
|
|
/* Set programmable interface timing for external uart */
|
|
tmp = DIV_ROUND_UP(10, ns) << SSB_PROG_WCNT_3_SHIFT;
|
|
tmp |= DIV_ROUND_UP(20, ns) << SSB_PROG_WCNT_2_SHIFT;
|
|
tmp |= DIV_ROUND_UP(100, ns) << SSB_PROG_WCNT_1_SHIFT;
|
|
tmp |= DIV_ROUND_UP(120, ns);
|
|
extif_write32(extif, SSB_EXTIF_PROG_WAITCNT, tmp);
|
|
}
|
|
|
|
void ssb_extif_get_clockcontrol(struct ssb_extif *extif,
|
|
u32 *pll_type, u32 *n, u32 *m)
|
|
{
|
|
*pll_type = SSB_PLLTYPE_1;
|
|
*n = extif_read32(extif, SSB_EXTIF_CLOCK_N);
|
|
*m = extif_read32(extif, SSB_EXTIF_CLOCK_SB);
|
|
}
|
|
|
|
u32 ssb_extif_gpio_in(struct ssb_extif *extif, u32 mask)
|
|
{
|
|
return extif_read32(extif, SSB_EXTIF_GPIO_IN) & mask;
|
|
}
|
|
|
|
void ssb_extif_gpio_out(struct ssb_extif *extif, u32 mask, u32 value)
|
|
{
|
|
return extif_write32_masked(extif, SSB_EXTIF_GPIO_OUT(0),
|
|
mask, value);
|
|
}
|
|
|
|
void ssb_extif_gpio_outen(struct ssb_extif *extif, u32 mask, u32 value)
|
|
{
|
|
return extif_write32_masked(extif, SSB_EXTIF_GPIO_OUTEN(0),
|
|
mask, value);
|
|
}
|
|
|