mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-12-27 02:06:28 +02:00
10f03e0475
This patch adds 802.1Q VLAN support for the ADM6996M chip. The driver is loaded for both the FC and M model. It will detect which of the two chips is connected. The FC model is initialised, but no further functionality is offered. The PHY driver will always report "100 Mbit/s, link up", for both the M and FC models. This reflects the fact that the link between switch chip and Ethernet MAC is always on[1]. Further documentation can be found in the kernel's Documentation/networking/adm6996.txt Signed-of-By: Peter Lebbing <peter@digitalbrains.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26865 3c298f89-4303-0410-b956-a3cf2f4a3e73
27 lines
851 B
Diff
27 lines
851 B
Diff
--- a/drivers/net/phy/Kconfig
|
|
+++ b/drivers/net/phy/Kconfig
|
|
@@ -88,6 +88,13 @@ config LSI_ET1011C_PHY
|
|
---help---
|
|
Supports the LSI ET1011C PHY.
|
|
|
|
+config ADM6996_PHY
|
|
+ tristate "Driver for ADM6996 switches"
|
|
+ select SWCONFIG
|
|
+ ---help---
|
|
+ Currently supports the ADM6996FC and ADM6996M switches.
|
|
+ Support for FC is very limited.
|
|
+
|
|
config FIXED_PHY
|
|
bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
|
|
depends on PHYLIB=y
|
|
--- a/drivers/net/phy/Makefile
|
|
+++ b/drivers/net/phy/Makefile
|
|
@@ -13,6 +13,7 @@ obj-$(CONFIG_VITESSE_PHY) += vitesse.o
|
|
obj-$(CONFIG_BROADCOM_PHY) += broadcom.o
|
|
obj-$(CONFIG_BCM63XX_PHY) += bcm63xx.o
|
|
obj-$(CONFIG_ICPLUS_PHY) += icplus.o
|
|
+obj-$(CONFIG_ADM6996_PHY) += adm6996.o
|
|
obj-$(CONFIG_REALTEK_PHY) += realtek.o
|
|
obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
|
|
obj-$(CONFIG_FIXED_PHY) += fixed.o
|