mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-09-12 16:07:07 +03:00
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22351 3c298f89-4303-0410-b956-a3cf2f4a3e73
575 lines
17 KiB
Diff
575 lines
17 KiB
Diff
Add support for the NetusG20 board by Acmesystems srl.
|
|
This board is based on AT91SAM9G20 SoC.
|
|
|
|
Signed-off-by: Claudio Mignanti <c.mignanti@gmail.com>
|
|
---
|
|
MAKEALL | 1 +
|
|
Makefile | 3 +
|
|
arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c | 5 +
|
|
board/acmesystems/netusg20/Makefile | 56 +++++++
|
|
board/acmesystems/netusg20/config.mk | 1 +
|
|
board/acmesystems/netusg20/led.c | 40 +++++
|
|
board/acmesystems/netusg20/netusg20.c | 152 +++++++++++++++++
|
|
board/acmesystems/netusg20/partition.c | 39 +++++
|
|
include/configs/netusg20.h | 181 +++++++++++++++++++++
|
|
9 files changed, 478 insertions(+), 0 deletions(-)
|
|
create mode 100644 board/acmesystems/netusg20/Makefile
|
|
create mode 100644 board/acmesystems/netusg20/config.mk
|
|
create mode 100644 board/acmesystems/netusg20/led.c
|
|
create mode 100644 board/acmesystems/netusg20/netusg20.c
|
|
create mode 100644 board/acmesystems/netusg20/partition.c
|
|
create mode 100644 include/configs/netusg20.h
|
|
|
|
diff --git a/MAKEALL b/MAKEALL
|
|
index d6d5f5b..60e36e1 100755
|
|
--- a/MAKEALL
|
|
+++ b/MAKEALL
|
|
@@ -684,6 +684,7 @@ LIST_at91=" \
|
|
meesc \
|
|
mp2usb \
|
|
m501sk \
|
|
+ netusg20 \
|
|
otc570 \
|
|
pm9261 \
|
|
pm9263 \
|
|
diff --git a/Makefile b/Makefile
|
|
index 87d5214..b73659f 100644
|
|
--- a/Makefile
|
|
+++ b/Makefile
|
|
@@ -2867,6 +2867,9 @@ at91sam9g45ekes_config : unconfig
|
|
fi;
|
|
@$(MKCONFIG) -a at91sam9m10g45ek arm arm926ejs at91sam9m10g45ek atmel at91
|
|
|
|
+netusg20_config: unconfig
|
|
+ @$(MKCONFIG) $(@:_config=) arm arm926ejs netusg20 acmesystems at91
|
|
+
|
|
otc570_config : unconfig
|
|
@$(MKCONFIG) $(@:_config=) arm arm926ejs otc570 esd at91
|
|
|
|
diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c
|
|
index 77d49ab..87ec531 100644
|
|
--- a/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c
|
|
+++ b/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c
|
|
@@ -59,7 +59,12 @@ void at91_serial3_hw_init(void)
|
|
{
|
|
at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
|
|
|
|
+#ifdef CONFIG_NETUSG20
|
|
+ /* pull-up active on DRXD*/
|
|
+ at91_set_a_periph(AT91_PIO_PORTB, 14, 1);
|
|
+#else
|
|
at91_set_a_periph(AT91_PIO_PORTB, 14, 0); /* DRXD */
|
|
+#endif
|
|
at91_set_a_periph(AT91_PIO_PORTB, 15, 1); /* DTXD */
|
|
writel(1 << AT91_ID_SYS, &pmc->pcer);
|
|
}
|
|
diff --git a/board/acmesystems/netusg20/Makefile b/board/acmesystems/netusg20/Makefile
|
|
new file mode 100644
|
|
index 0000000..31589fd
|
|
--- /dev/null
|
|
+++ b/board/acmesystems/netusg20/Makefile
|
|
@@ -0,0 +1,56 @@
|
|
+#
|
|
+# (C) Copyright 2003-2008
|
|
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
+#
|
|
+# (C) Copyright 2008
|
|
+# Stelian Pop <stelian.pop@leadtechdesign.com>
|
|
+# Lead Tech Design <www.leadtechdesign.com>
|
|
+#
|
|
+# See file CREDITS for list of people who contributed to this
|
|
+# project.
|
|
+#
|
|
+# This program is free software; you can redistribute it and/or
|
|
+# modify it under the terms of the GNU General Public License as
|
|
+# published by the Free Software Foundation; either version 2 of
|
|
+# the License, or (at your option) any later version.
|
|
+#
|
|
+# This program is distributed in the hope that it will be useful,
|
|
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
+# GNU General Public License for more details.
|
|
+#
|
|
+# You should have received a copy of the GNU General Public License
|
|
+# along with this program; if not, write to the Free Software
|
|
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
+# MA 02111-1307 USA
|
|
+#
|
|
+
|
|
+include $(TOPDIR)/config.mk
|
|
+
|
|
+LIB = $(obj)lib$(BOARD).a
|
|
+
|
|
+COBJS-y += netusg20.o
|
|
+COBJS-y += led.o
|
|
+COBJS-y += partition.o
|
|
+
|
|
+SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
|
|
+OBJS := $(addprefix $(obj),$(COBJS-y))
|
|
+SOBJS := $(addprefix $(obj),$(SOBJS))
|
|
+
|
|
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
|
|
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
|
|
+
|
|
+clean:
|
|
+ rm -f $(SOBJS) $(OBJS)
|
|
+
|
|
+distclean: clean
|
|
+ rm -f $(LIB) core *.bak $(obj).depend
|
|
+
|
|
+#########################################################################
|
|
+
|
|
+# defines $(obj).depend target
|
|
+include $(SRCTREE)/rules.mk
|
|
+
|
|
+sinclude $(obj).depend
|
|
+
|
|
+#########################################################################
|
|
diff --git a/board/acmesystems/netusg20/config.mk b/board/acmesystems/netusg20/config.mk
|
|
new file mode 100644
|
|
index 0000000..ff2cfd1
|
|
--- /dev/null
|
|
+++ b/board/acmesystems/netusg20/config.mk
|
|
@@ -0,0 +1 @@
|
|
+TEXT_BASE = 0x23f00000
|
|
diff --git a/board/acmesystems/netusg20/led.c b/board/acmesystems/netusg20/led.c
|
|
new file mode 100644
|
|
index 0000000..1016b98
|
|
--- /dev/null
|
|
+++ b/board/acmesystems/netusg20/led.c
|
|
@@ -0,0 +1,40 @@
|
|
+/*
|
|
+ * (C) Copyright 2007-2008
|
|
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
|
|
+ * Lead Tech Design <www.leadtechdesign.com>
|
|
+ *
|
|
+ * See file CREDITS for list of people who contributed to this
|
|
+ * project.
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or
|
|
+ * modify it under the terms of the GNU General Public License as
|
|
+ * published by the Free Software Foundation; either version 2 of
|
|
+ * the License, or (at your option) any later version.
|
|
+ *
|
|
+ * This program is distributed in the hope that it will be useful,
|
|
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
+ * GNU General Public License for more details.
|
|
+ *
|
|
+ * You should have received a copy of the GNU General Public License
|
|
+ * along with this program; if not, write to the Free Software
|
|
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
+ * MA 02111-1307 USA
|
|
+ */
|
|
+
|
|
+#include <common.h>
|
|
+#include <asm/arch/at91sam9260.h>
|
|
+#include <asm/arch/at91_pmc.h>
|
|
+#include <asm/arch/gpio.h>
|
|
+#include <asm/arch/io.h>
|
|
+
|
|
+
|
|
+void coloured_LED_init(void)
|
|
+{
|
|
+ /* Enable clock */
|
|
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_PIOA);
|
|
+
|
|
+ at91_set_gpio_output(CONFIG_RED_LED, 1);
|
|
+
|
|
+ at91_set_gpio_value(CONFIG_RED_LED, 1);
|
|
+}
|
|
diff --git a/board/acmesystems/netusg20/netusg20.c b/board/acmesystems/netusg20/netusg20.c
|
|
new file mode 100644
|
|
index 0000000..94b4d4c
|
|
--- /dev/null
|
|
+++ b/board/acmesystems/netusg20/netusg20.c
|
|
@@ -0,0 +1,152 @@
|
|
+/*
|
|
+ * (C) Copyright 2007-2008
|
|
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
|
|
+ * Lead Tech Design <www.leadtechdesign.com>
|
|
+ *
|
|
+ * (C) Copyright 2010
|
|
+ * Claudio Mignanti <c.mignanti@gmail.com>
|
|
+ *
|
|
+ * See file CREDITS for list of people who contributed to this
|
|
+ * project.
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or
|
|
+ * modify it under the terms of the GNU General Public License as
|
|
+ * published by the Free Software Foundation; either version 2 of
|
|
+ * the License, or (at your option) any later version.
|
|
+ *
|
|
+ * This program is distributed in the hope that it will be useful,
|
|
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
+ * GNU General Public License for more details.
|
|
+ *
|
|
+ * You should have received a copy of the GNU General Public License
|
|
+ * along with this program; if not, write to the Free Software
|
|
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
+ * MA 02111-1307 USA
|
|
+ */
|
|
+
|
|
+#include <common.h>
|
|
+#include <asm/arch/at91sam9260.h>
|
|
+#include <asm/arch/at91sam9260_matrix.h>
|
|
+#include <asm/arch/at91sam9_smc.h>
|
|
+#include <asm/arch/at91_common.h>
|
|
+#include <asm/arch/at91_pmc.h>
|
|
+#include <asm/arch/at91_rstc.h>
|
|
+#include <asm/arch/gpio.h>
|
|
+#include <asm/arch/io.h>
|
|
+#include <asm/arch/hardware.h>
|
|
+#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
|
|
+#include <net.h>
|
|
+#endif
|
|
+#include <netdev.h>
|
|
+
|
|
+DECLARE_GLOBAL_DATA_PTR;
|
|
+
|
|
+/* ------------------------------------------------------------------------- */
|
|
+/*
|
|
+ * Miscelaneous platform dependent initialisations
|
|
+ */
|
|
+
|
|
+#ifdef CONFIG_MACB
|
|
+static void at91sam9260ek_macb_hw_init(void)
|
|
+{
|
|
+ unsigned long rstc;
|
|
+
|
|
+ /* Enable clock */
|
|
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_EMAC);
|
|
+
|
|
+ /*
|
|
+ * Disable pull-up on:
|
|
+ * RXDV (PA17) => PHY normal mode (not Test mode)
|
|
+ * ERX0 (PA14) => PHY ADDR0
|
|
+ * ERX1 (PA15) => PHY ADDR1
|
|
+ * ERX2 (PA25) => PHY ADDR2
|
|
+ * ERX3 (PA26) => PHY ADDR3
|
|
+ * ECRS (PA28) => PHY ADDR4 => PHYADDR = 0x0
|
|
+ *
|
|
+ * PHY has internal pull-down
|
|
+ */
|
|
+ writel(pin_to_mask(AT91_PIN_PA14) |
|
|
+ pin_to_mask(AT91_PIN_PA15) |
|
|
+ pin_to_mask(AT91_PIN_PA17) |
|
|
+ pin_to_mask(AT91_PIN_PA25) |
|
|
+ pin_to_mask(AT91_PIN_PA26) |
|
|
+ pin_to_mask(AT91_PIN_PA28),
|
|
+ pin_to_controller(AT91_PIN_PA0) + PIO_PUDR);
|
|
+
|
|
+ rstc = at91_sys_read(AT91_RSTC_MR) & AT91_RSTC_ERSTL;
|
|
+
|
|
+ at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_EXTRST);
|
|
+
|
|
+ /* Wait for end hardware reset */
|
|
+ while (!(at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_NRSTL));
|
|
+
|
|
+ /* Restore NRST value */
|
|
+ at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
|
|
+ (rstc) |
|
|
+ AT91_RSTC_URSTEN);
|
|
+
|
|
+ /* Re-enable pull-up */
|
|
+ writel(pin_to_mask(AT91_PIN_PA14) |
|
|
+ pin_to_mask(AT91_PIN_PA15) |
|
|
+ pin_to_mask(AT91_PIN_PA17) |
|
|
+ pin_to_mask(AT91_PIN_PA25) |
|
|
+ pin_to_mask(AT91_PIN_PA26) |
|
|
+ pin_to_mask(AT91_PIN_PA28),
|
|
+ pin_to_controller(AT91_PIN_PA0) + PIO_PUER);
|
|
+
|
|
+ at91_macb_hw_init();
|
|
+}
|
|
+#endif
|
|
+
|
|
+int board_init(void)
|
|
+{
|
|
+ /* Enable Ctrlc */
|
|
+ console_init_f();
|
|
+
|
|
+ gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9G20EK;
|
|
+
|
|
+ /* adress of boot parameters */
|
|
+ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
|
|
+
|
|
+ at91_serial_hw_init();
|
|
+#ifdef CONFIG_HAS_DATAFLASH
|
|
+ at91_spi0_hw_init((1 << 0) | (1 << 1));
|
|
+#endif
|
|
+#ifdef CONFIG_MACB
|
|
+ at91sam9260ek_macb_hw_init();
|
|
+#endif
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+int dram_init(void)
|
|
+{
|
|
+ gd->bd->bi_dram[0].start = PHYS_SDRAM;
|
|
+ gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+#ifdef CONFIG_RESET_PHY_R
|
|
+void reset_phy(void)
|
|
+{
|
|
+#ifdef CONFIG_MACB
|
|
+ /*
|
|
+ * Initialize ethernet HW addr prior to starting Linux,
|
|
+ * needed for nfsroot
|
|
+ */
|
|
+ eth_init(gd->bd);
|
|
+#endif
|
|
+}
|
|
+#endif
|
|
+
|
|
+int board_eth_init(bd_t *bis)
|
|
+{
|
|
+ int rc = 0;
|
|
+#ifdef CONFIG_MACB
|
|
+ rc = macb_eth_initialize(0, (void *)AT91SAM9260_BASE_EMAC, 0x00);
|
|
+#endif
|
|
+ return rc;
|
|
+}
|
|
+
|
|
+void show_boot_progress (int val){}
|
|
diff --git a/board/acmesystems/netusg20/partition.c b/board/acmesystems/netusg20/partition.c
|
|
new file mode 100644
|
|
index 0000000..7d79e53
|
|
--- /dev/null
|
|
+++ b/board/acmesystems/netusg20/partition.c
|
|
@@ -0,0 +1,39 @@
|
|
+/*
|
|
+ * (C) Copyright 2008
|
|
+ * Ulf Samuelsson <ulf@atmel.com>
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or
|
|
+ * modify it under the terms of the GNU General Public License as
|
|
+ * published by the Free Software Foundation; either version 2 of
|
|
+ * the License, or (at your option) any later version.
|
|
+ *
|
|
+ * This program is distributed in the hope that it will be useful,
|
|
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
+ * GNU General Public License for more details.
|
|
+ *
|
|
+ * You should have received a copy of the GNU General Public License
|
|
+ * along with this program; if not, write to the Free Software
|
|
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
+ * MA 02111-1307 USA
|
|
+ *
|
|
+ */
|
|
+#include <common.h>
|
|
+#include <config.h>
|
|
+#include <asm/hardware.h>
|
|
+#include <dataflash.h>
|
|
+
|
|
+AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS];
|
|
+
|
|
+struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = {
|
|
+ {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1, 1}
|
|
+};
|
|
+
|
|
+/*define the area offsets*/
|
|
+dataflash_protect_t area_list[NB_DATAFLASH_AREA] = {
|
|
+ {0x00000000, 0x000041FF, FLAG_PROTECT_SET, 0, "Bootstrap"},
|
|
+ {0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"},
|
|
+ {0x00008400, 0x00041FFF, FLAG_PROTECT_SET, 0, "U-Boot"},
|
|
+ {0x00042000, 0x00251FFF, FLAG_PROTECT_CLEAR, 0, "Kernel"},
|
|
+ {0x00252000, 0xFFFFFFFF, FLAG_PROTECT_CLEAR, 0, "FS"},
|
|
+};
|
|
diff --git a/include/configs/netusg20.h b/include/configs/netusg20.h
|
|
new file mode 100644
|
|
index 0000000..99b4f12
|
|
--- /dev/null
|
|
+++ b/include/configs/netusg20.h
|
|
@@ -0,0 +1,181 @@
|
|
+/*
|
|
+ * (C) Copyright 2007-2008
|
|
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
|
|
+ * Lead Tech Design <www.leadtechdesign.com>
|
|
+ *
|
|
+ * Configuation settings for the NetusG20 boards.
|
|
+ *
|
|
+ * See file CREDITS for list of people who contributed to this
|
|
+ * project.
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or
|
|
+ * modify it under the terms of the GNU General Public License as
|
|
+ * published by the Free Software Foundation; either version 2 of
|
|
+ * the License, or (at your option) any later version.
|
|
+ *
|
|
+ * This program is distributed in the hope that it will be useful,
|
|
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
+ * GNU General Public License for more details.
|
|
+ *
|
|
+ * You should have received a copy of the GNU General Public License
|
|
+ * along with this program; if not, write to the Free Software
|
|
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
+ * MA 02111-1307 USA
|
|
+ */
|
|
+
|
|
+#ifndef __CONFIG_H
|
|
+#define __CONFIG_H
|
|
+
|
|
+#define CONFIG_AT91_LEGACY
|
|
+
|
|
+/* ARM asynchronous clock */
|
|
+#define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* 18.432 MHz crystal */
|
|
+#define CONFIG_SYS_HZ 1000
|
|
+
|
|
+#define CONFIG_DISPLAY_CPUINFO
|
|
+
|
|
+#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */
|
|
+#define CONFIG_AT91SAM9G20 1 /* It's an Atmel AT91SAM9G20 SoC*/
|
|
+#define CONFIG_NETUSG20 1
|
|
+
|
|
+#define CONFIG_ARCH_CPU_INIT
|
|
+#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
|
|
+
|
|
+#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
|
|
+#define CONFIG_SETUP_MEMORY_TAGS 1
|
|
+#define CONFIG_INITRD_TAG 1
|
|
+
|
|
+#define CONFIG_SKIP_LOWLEVEL_INIT
|
|
+#define CONFIG_SKIP_RELOCATE_UBOOT
|
|
+
|
|
+/*
|
|
+ * Hardware drivers
|
|
+ */
|
|
+#define CONFIG_AT91_GPIO 1
|
|
+#define CONFIG_ATMEL_USART 1
|
|
+#undef CONFIG_USART0
|
|
+#undef CONFIG_USART1
|
|
+#undef CONFIG_USART2
|
|
+#define CONFIG_USART3 1 /* USART 3 is DBGU */
|
|
+
|
|
+/* LED */
|
|
+#define CONFIG_AT91_LED
|
|
+#define CONFIG_RED_LED AT91_PIN_PA9 /* this is the power led */
|
|
+#define CONFIG_GREEN_LED AT91_PIN_PA6 /* this is the user led */
|
|
+
|
|
+#define CONFIG_BOOTDELAY 3
|
|
+
|
|
+/*
|
|
+ * BOOTP options
|
|
+ */
|
|
+#define CONFIG_BOOTP_BOOTFILESIZE 1
|
|
+#define CONFIG_BOOTP_BOOTPATH 1
|
|
+#define CONFIG_BOOTP_GATEWAY 1
|
|
+#define CONFIG_BOOTP_HOSTNAME 1
|
|
+
|
|
+/*
|
|
+ * Command line configuration.
|
|
+ */
|
|
+#include <config_cmd_default.h>
|
|
+#undef CONFIG_CMD_BDI
|
|
+#undef CONFIG_CMD_FPGA
|
|
+#undef CONFIG_CMD_IMI
|
|
+#undef CONFIG_CMD_IMLS
|
|
+#undef CONFIG_CMD_LOADS
|
|
+#undef CONFIG_CMD_SOURCE
|
|
+
|
|
+#define CONFIG_CMD_PING 1
|
|
+#define CONFIG_CMD_DHCP 1
|
|
+#define CONFIG_CMD_USB 1
|
|
+
|
|
+/* SDRAM */
|
|
+#define CONFIG_NR_DRAM_BANKS 1
|
|
+#define PHYS_SDRAM 0x20000000
|
|
+#define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */
|
|
+
|
|
+/* DataFlash */
|
|
+#define CONFIG_ATMEL_DATAFLASH_SPI
|
|
+#define CONFIG_HAS_DATAFLASH 1
|
|
+#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ)
|
|
+#define CONFIG_SYS_MAX_DATAFLASH_BANKS 1
|
|
+#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 0xD0000000 /* CS1 */
|
|
+#define AT91_SPI_CLK 15000000
|
|
+
|
|
+#define DATAFLASH_TCSS (0x22 << 16)
|
|
+#define DATAFLASH_TCHS (0x1 << 24)
|
|
+
|
|
+/* no NAND flash on this board*/
|
|
+#define CONFIG_SYS_NO_FLASH
|
|
+
|
|
+/* Ethernet */
|
|
+#define CONFIG_MACB 1
|
|
+#define CONFIG_RMII 1
|
|
+#define CONFIG_NET_MULTI 1
|
|
+#define CONFIG_NET_RETRY_COUNT 20
|
|
+#define CONFIG_RESET_PHY_R 1
|
|
+
|
|
+/* MMC */
|
|
+#define CONFIG_MMC
|
|
+#define CONFIG_CMD_MMC
|
|
+#define CONFIG_ATMEL_MCI
|
|
+#define CONFIG_CMD_AUTOSCRIPT
|
|
+#define CONFIG_CMD_IMI
|
|
+#define CONFIG_CMD_SOURCE
|
|
+
|
|
+#define MMCI_BASE 0xFFFA8000
|
|
+
|
|
+/* USB */
|
|
+#define CONFIG_USB_ATMEL
|
|
+#define CONFIG_USB_OHCI_NEW 1
|
|
+#define CONFIG_DOS_PARTITION 1
|
|
+#define CONFIG_SYS_USB_OHCI_CPU_INIT 1
|
|
+#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 /* AT91SAM9260_UHP_BASE */
|
|
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260"
|
|
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
|
|
+#define CONFIG_USB_STORAGE 1
|
|
+
|
|
+#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
|
|
+
|
|
+#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
|
|
+#define CONFIG_SYS_MEMTEST_END 0x23e00000
|
|
+
|
|
+/* Filesystem */
|
|
+#define CONFIG_CMD_FAT 1
|
|
+#define CONFIG_CMD_EXT2 1
|
|
+
|
|
+/* bootstrap + u-boot + env + linux in dataflash on CS1 */
|
|
+#define CONFIG_ENV_IS_IN_DATAFLASH 1
|
|
+#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 + 0x8400)
|
|
+#define CONFIG_ENV_OFFSET 0x4200
|
|
+#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 + CONFIG_ENV_OFFSET)
|
|
+#define CONFIG_ENV_SIZE 0x4200
|
|
+#define CONFIG_BOOTCOMMAND "mmc init; sleep 1; " \
|
|
+ "ext2load mmc 0 0x20000000 uImage; " \
|
|
+ "source 0x20000000"
|
|
+#define CONFIG_BOOTARGS "mem=64M console=ttyS0,115200 " \
|
|
+ "root=/dev/mmcblk0p1 rootwait"
|
|
+
|
|
+#define CONFIG_BAUDRATE 115200
|
|
+#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
|
|
+
|
|
+#define CONFIG_SYS_PROMPT "U-Boot> "
|
|
+#define CONFIG_SYS_CBSIZE 256
|
|
+#define CONFIG_SYS_MAXARGS 16
|
|
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
|
|
+#define CONFIG_SYS_LONGHELP 1
|
|
+#define CONFIG_CMDLINE_EDITING 1
|
|
+
|
|
+/*
|
|
+ * Size of malloc() pool
|
|
+ */
|
|
+#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
|
|
+#define CONFIG_SYS_GBL_DATA_SIZE 128 /* 128 bytes for initial data */
|
|
+
|
|
+#define CONFIG_STACKSIZE (32*1024) /* regular stack */
|
|
+
|
|
+#ifdef CONFIG_USE_IRQ
|
|
+#error CONFIG_USE_IRQ not supported
|
|
+#endif
|
|
+
|
|
+#endif
|
|
--
|
|
1.7.0.4
|
|
|
|
|