mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-11-10 00:45:21 +02:00
f152e7bb1c
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27663 3c298f89-4303-0410-b956-a3cf2f4a3e73
437 lines
10 KiB
C
437 lines
10 KiB
C
/*
|
|
* (C) Copyright 2003
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* (C) Copyright 2010
|
|
* Thomas Langer, Ralph Hempel
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <netdev.h>
|
|
#include <miiphy.h>
|
|
#include <asm/addrspace.h>
|
|
#include <asm/danube.h>
|
|
#include <asm/reboot.h>
|
|
#include <asm/io.h>
|
|
#if defined(CONFIG_CMD_HTTPD)
|
|
#include <httpd.h>
|
|
#endif
|
|
|
|
extern ulong ifx_get_ddr_hz(void);
|
|
extern ulong ifx_get_cpuclk(void);
|
|
|
|
/* definitions for external PHYs / Switches */
|
|
/* Split values into phy address and register address */
|
|
#define PHYADDR(_reg) ((_reg >> 5) & 0xff), (_reg & 0x1f)
|
|
|
|
/* IDs and registers of known external switches */
|
|
#define ID_SAMURAI_0 0x1020
|
|
#define ID_SAMURAI_1 0x0007
|
|
#define SAMURAI_ID_REG0 0xA0
|
|
#define SAMURAI_ID_REG1 0xA1
|
|
|
|
#define ID_TANTOS 0x2599
|
|
|
|
void _machine_restart(void)
|
|
{
|
|
*DANUBE_RCU_RST_REQ |=1<<30;
|
|
}
|
|
|
|
#ifdef CONFIG_SYS_RAMBOOT
|
|
phys_size_t initdram(int board_type)
|
|
{
|
|
return get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MAX_RAM);
|
|
}
|
|
#elif defined(CONFIG_USE_DDR_RAM)
|
|
phys_size_t initdram(int board_type)
|
|
{
|
|
return (CONFIG_SYS_MAX_RAM);
|
|
}
|
|
#else
|
|
|
|
static ulong max_sdram_size(void) /* per Chip Select */
|
|
{
|
|
/* The only supported SDRAM data width is 16bit.
|
|
*/
|
|
#define CFG_DW 4
|
|
|
|
/* The only supported number of SDRAM banks is 4.
|
|
*/
|
|
#define CFG_NB 4
|
|
|
|
ulong cfgpb0 = *DANUBE_SDRAM_MC_CFGPB0;
|
|
int cols = cfgpb0 & 0xF;
|
|
int rows = (cfgpb0 & 0xF0) >> 4;
|
|
ulong size = (1 << (rows + cols)) * CFG_DW * CFG_NB;
|
|
|
|
return size;
|
|
}
|
|
|
|
/*
|
|
* Check memory range for valid RAM. A simple memory test determines
|
|
* the actually available RAM size between addresses `base' and
|
|
* `base + maxsize'.
|
|
*/
|
|
|
|
static long int dram_size(long int *base, long int maxsize)
|
|
{
|
|
volatile long int *addr;
|
|
ulong cnt, val;
|
|
ulong save[32]; /* to make test non-destructive */
|
|
unsigned char i = 0;
|
|
|
|
for (cnt = (maxsize / sizeof (long)) >> 1; cnt > 0; cnt >>= 1) {
|
|
addr = base + cnt; /* pointer arith! */
|
|
|
|
save[i++] = *addr;
|
|
*addr = ~cnt;
|
|
}
|
|
|
|
/* write 0 to base address */
|
|
addr = base;
|
|
save[i] = *addr;
|
|
*addr = 0;
|
|
|
|
/* check at base address */
|
|
if ((val = *addr) != 0) {
|
|
*addr = save[i];
|
|
return (0);
|
|
}
|
|
|
|
for (cnt = 1; cnt < maxsize / sizeof (long); cnt <<= 1) {
|
|
addr = base + cnt; /* pointer arith! */
|
|
|
|
val = *addr;
|
|
*addr = save[--i];
|
|
|
|
if (val != (~cnt)) {
|
|
return (cnt * sizeof (long));
|
|
}
|
|
}
|
|
return (maxsize);
|
|
}
|
|
|
|
phys_size_t initdram(int board_type)
|
|
{
|
|
int rows, cols, best_val = *DANUBE_SDRAM_MC_CFGPB0;
|
|
ulong size, max_size = 0;
|
|
ulong our_address;
|
|
|
|
/* load t9 into our_address */
|
|
asm volatile ("move %0, $25" : "=r" (our_address) :);
|
|
|
|
/* Can't probe for RAM size unless we are running from Flash.
|
|
* find out whether running from DRAM or Flash.
|
|
*/
|
|
if (CPHYSADDR(our_address) < CPHYSADDR(PHYS_FLASH_1))
|
|
{
|
|
return max_sdram_size();
|
|
}
|
|
|
|
for (cols = 0x8; cols <= 0xC; cols++)
|
|
{
|
|
for (rows = 0xB; rows <= 0xD; rows++)
|
|
{
|
|
*DANUBE_SDRAM_MC_CFGPB0 = (0x14 << 8) |
|
|
(rows << 4) | cols;
|
|
size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE,
|
|
max_sdram_size());
|
|
|
|
if (size > max_size)
|
|
{
|
|
best_val = *DANUBE_SDRAM_MC_CFGPB0;
|
|
max_size = size;
|
|
}
|
|
}
|
|
}
|
|
|
|
*DANUBE_SDRAM_MC_CFGPB0 = best_val;
|
|
return max_size;
|
|
}
|
|
#endif
|
|
|
|
int checkboard (void)
|
|
{
|
|
unsigned long chipid = *DANUBE_MPS_CHIPID;
|
|
int part_num;
|
|
|
|
puts ("Board: ");
|
|
|
|
part_num = DANUBE_MPS_CHIPID_PARTNUM_GET(chipid);
|
|
switch (part_num)
|
|
{
|
|
case 0x129:
|
|
case 0x12B:
|
|
case 0x12D:
|
|
puts("Danube/Twinpass/Vinax-VE ");
|
|
break;
|
|
default:
|
|
printf ("unknown, chip part number 0x%03X ", part_num);
|
|
break;
|
|
}
|
|
printf ("V1.%ld, ", DANUBE_MPS_CHIPID_VERSION_GET(chipid));
|
|
|
|
printf("DDR Speed %ld MHz, ", ifx_get_ddr_hz()/1000000);
|
|
printf("CPU Speed %ld MHz\n", ifx_get_cpuclk()/1000000);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_SKIP_LOWLEVEL_INIT
|
|
int board_early_init_f(void)
|
|
{
|
|
#ifdef CONFIG_EBU_ADDSEL0
|
|
(*DANUBE_EBU_ADDSEL0) = CONFIG_EBU_ADDSEL0;
|
|
#endif
|
|
#ifdef CONFIG_EBU_ADDSEL1
|
|
(*DANUBE_EBU_ADDSEL1) = CONFIG_EBU_ADDSEL1;
|
|
#endif
|
|
#ifdef CONFIG_EBU_ADDSEL2
|
|
(*DANUBE_EBU_ADDSEL2) = CONFIG_EBU_ADDSEL2;
|
|
#endif
|
|
#ifdef CONFIG_EBU_ADDSEL3
|
|
(*DANUBE_EBU_ADDSEL3) = CONFIG_EBU_ADDSEL3;
|
|
#endif
|
|
#ifdef CONFIG_EBU_BUSCON0
|
|
(*DANUBE_EBU_BUSCON0) = CONFIG_EBU_BUSCON0;
|
|
#endif
|
|
#ifdef CONFIG_EBU_BUSCON1
|
|
(*DANUBE_EBU_BUSCON1) = CONFIG_EBU_BUSCON1;
|
|
#endif
|
|
#ifdef CONFIG_EBU_BUSCON2
|
|
(*DANUBE_EBU_BUSCON2) = CONFIG_EBU_BUSCON2;
|
|
#endif
|
|
#ifdef CONFIG_EBU_BUSCON3
|
|
(*DANUBE_EBU_BUSCON3) = CONFIG_EBU_BUSCON3;
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
|
|
|
|
#ifdef CONFIG_EXTRA_SWITCH
|
|
static int external_switch_init(void)
|
|
{
|
|
unsigned short chipid0=0xdead, chipid1=0xbeef;
|
|
static char * const name = "lq_cpe_eth";
|
|
|
|
#ifdef CONFIG_SWITCH_PORT0
|
|
*DANUBE_GPIO_P0_ALTSEL0 &= ~(1<<CONFIG_SWITCH_PIN);
|
|
*DANUBE_GPIO_P0_ALTSEL1 &= ~(1<<CONFIG_SWITCH_PIN);
|
|
*DANUBE_GPIO_P0_OD |= (1<<CONFIG_SWITCH_PIN);
|
|
*DANUBE_GPIO_P0_DIR |= (1<<CONFIG_SWITCH_PIN);
|
|
*DANUBE_GPIO_P0_OUT |= (1<<CONFIG_SWITCH_PIN);
|
|
#elif defined(CONFIG_SWITCH_PORT1)
|
|
*DANUBE_GPIO_P1_ALTSEL0 &= ~(1<<CONFIG_SWITCH_PIN);
|
|
*DANUBE_GPIO_P1_ALTSEL1 &= ~(1<<CONFIG_SWITCH_PIN);
|
|
*DANUBE_GPIO_P1_OD |= (1<<CONFIG_SWITCH_PIN);
|
|
*DANUBE_GPIO_P1_DIR |= (1<<CONFIG_SWITCH_PIN);
|
|
*DANUBE_GPIO_P1_OUT |= (1<<CONFIG_SWITCH_PIN);
|
|
#endif
|
|
#ifdef CLK_OUT2_25MHZ
|
|
*DANUBE_GPIO_P0_DIR=0x0000ae78;
|
|
*DANUBE_GPIO_P0_ALTSEL0=0x00008078;
|
|
//joelin for Mii-1 *DANUBE_GPIO_P0_ALTSEL1=0x80000080;
|
|
*DANUBE_GPIO_P0_ALTSEL1=0x80000000; //joelin for Mii-1
|
|
*DANUBE_CGU_IFCCR=0x00400010;
|
|
*DANUBE_GPIO_P0_OD=0x0000ae78;
|
|
#endif
|
|
|
|
/* earlier no valid response is available, at least on Twinpass & Tantos @ 111MHz, M4530 platform */
|
|
udelay(100000);
|
|
|
|
debug("\nsearching for Samurai switch ... ");
|
|
if ( (miiphy_read(name, PHYADDR(SAMURAI_ID_REG0), &chipid0)==0) &&
|
|
(miiphy_read(name, PHYADDR(SAMURAI_ID_REG1), &chipid1)==0) ) {
|
|
if (((chipid0 & 0xFFF0) == ID_SAMURAI_0) &&
|
|
((chipid1 & 0x000F) == ID_SAMURAI_1)) {
|
|
debug("found");
|
|
|
|
/* enable "Crossover Auto Detect" + defaults */
|
|
/* P0 */
|
|
miiphy_write(name, PHYADDR(0x01), 0x840F);
|
|
/* P1 */
|
|
miiphy_write(name, PHYADDR(0x03), 0x840F);
|
|
/* P2 */
|
|
miiphy_write(name, PHYADDR(0x05), 0x840F);
|
|
/* P3 */
|
|
miiphy_write(name, PHYADDR(0x07), 0x840F);
|
|
/* P4 */
|
|
miiphy_write(name, PHYADDR(0x08), 0x840F);
|
|
/* P5 */
|
|
miiphy_write(name, PHYADDR(0x09), 0x840F);
|
|
/* System Control 4: CPU on port 1 and other */
|
|
miiphy_write(name, PHYADDR(0x12), 0x3602);
|
|
#ifdef CLK_OUT2_25MHZ
|
|
/* Bandwidth Control Enable Register: enable */
|
|
miiphy_write(name, PHYADDR(0x33), 0x4000);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
debug("\nsearching for TANTOS switch ... ");
|
|
if (miiphy_read(name, PHYADDR(0x101), &chipid0) == 0) {
|
|
if (chipid0 == ID_TANTOS) {
|
|
debug("found");
|
|
|
|
/* P5 Basic Control: Force Link Up */
|
|
miiphy_write(name, PHYADDR(0xA1), 0x0004);
|
|
/* P6 Basic Control: Force Link Up */
|
|
miiphy_write(name, PHYADDR(0xC1), 0x0004);
|
|
/* RGMII/MII Port Control (P4/5/6) */
|
|
miiphy_write(name, PHYADDR(0xF5), 0x0773);
|
|
|
|
/* Software workaround. */
|
|
/* PHY reset from P0 to P4. */
|
|
|
|
/* set data for indirect write */
|
|
miiphy_write(name, PHYADDR(0x121), 0x8000);
|
|
|
|
/* P0 */
|
|
miiphy_write(name, PHYADDR(0x120), 0x0400);
|
|
udelay(1000);
|
|
/* P1 */
|
|
miiphy_write(name, PHYADDR(0x120), 0x0420);
|
|
udelay(1000);
|
|
/* P2 */
|
|
miiphy_write(name, PHYADDR(0x120), 0x0440);
|
|
udelay(1000);
|
|
/* P3 */
|
|
miiphy_write(name, PHYADDR(0x120), 0x0460);
|
|
udelay(1000);
|
|
/* P4 */
|
|
miiphy_write(name, PHYADDR(0x120), 0x0480);
|
|
udelay(1000);
|
|
}
|
|
}
|
|
debug("\n");
|
|
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_EXTRA_SWITCH */
|
|
|
|
int board_gpio_init(void)
|
|
{
|
|
#ifdef CONFIG_BUTTON_PORT0
|
|
*DANUBE_GPIO_P0_ALTSEL0 &= ~(1<<CONFIG_BUTTON_PIN);
|
|
*DANUBE_GPIO_P0_ALTSEL1 &= ~(1<<CONFIG_BUTTON_PIN);
|
|
*DANUBE_GPIO_P0_DIR &= ~(1<<CONFIG_BUTTON_PIN);
|
|
if(!!(*DANUBE_GPIO_P0_IN & (1<<CONFIG_BUTTON_PIN)) == CONFIG_BUTTON_LEVEL)
|
|
{
|
|
printf("button is pressed\n");
|
|
setenv("bootdelay", "0");
|
|
setenv("bootcmd", "httpd");
|
|
}
|
|
#elif defined(CONFIG_BUTTON_PORT1)
|
|
*DANUBE_GPIO_P1_ALTSEL0 &= ~(1<<CONFIG_BUTTON_PIN);
|
|
*DANUBE_GPIO_P1_ALTSEL1 &= ~(1<<CONFIG_BUTTON_PIN);
|
|
*DANUBE_GPIO_P1_DIR &= ~(1<<CONFIG_BUTTON_PIN);
|
|
if(!!(*DANUBE_GPIO_P1_IN & (1<<CONFIG_BUTTON_PIN)) == CONFIG_BUTTON_LEVEL)
|
|
{
|
|
printf("button is pressed\n");
|
|
setenv("bootdelay", "0");
|
|
setenv("bootcmd", "httpd");
|
|
}
|
|
#endif
|
|
}
|
|
|
|
int board_eth_init(bd_t *bis)
|
|
{
|
|
|
|
board_gpio_init();
|
|
|
|
#if defined(CONFIG_IFX_ETOP)
|
|
|
|
*DANUBE_PMU_PWDCR &= 0xFFFFEFDF;
|
|
*DANUBE_PMU_PWDCR &=~(1<<DANUBE_PMU_DMA_SHIFT);/*enable DMA from PMU*/
|
|
|
|
if (lq_eth_initialize(bis)<0)
|
|
return -1;
|
|
|
|
*DANUBE_RCU_RST_REQ |=1;
|
|
udelay(200000);
|
|
*DANUBE_RCU_RST_REQ &=(unsigned long)~1;
|
|
udelay(1000);
|
|
|
|
#ifdef CONFIG_EXTRA_SWITCH
|
|
if (external_switch_init()<0)
|
|
return -1;
|
|
#endif /* CONFIG_EXTRA_SWITCH */
|
|
#endif /* CONFIG_IFX_ETOP */
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if defined(CONFIG_CMD_HTTPD)
|
|
int do_http_upgrade(const unsigned char *data, const ulong size)
|
|
{
|
|
char buf[128];
|
|
|
|
if(getenv ("ram_addr") == NULL)
|
|
return -1;
|
|
if(getenv ("kernel_addr") == NULL)
|
|
return -1;
|
|
/* check the image */
|
|
if(run_command("imi ${ram_addr}", 0) < 0) {
|
|
return -1;
|
|
}
|
|
/* write the image to the flash */
|
|
puts("http ugrade ...\n");
|
|
sprintf(buf, "era ${kernel_addr} +0x%x; cp.b ${ram_addr} ${kernel_addr} 0x%x", size, size);
|
|
return run_command(buf, 0);
|
|
}
|
|
|
|
int do_http_progress(const int state)
|
|
{
|
|
/* toggle LED's here */
|
|
switch(state) {
|
|
case HTTP_PROGRESS_START:
|
|
puts("http start\n");
|
|
break;
|
|
case HTTP_PROGRESS_TIMEOUT:
|
|
puts(".");
|
|
break;
|
|
case HTTP_PROGRESS_UPLOAD_READY:
|
|
puts("http upload ready\n");
|
|
break;
|
|
case HTTP_PROGRESS_UGRADE_READY:
|
|
puts("http ugrade ready\n");
|
|
break;
|
|
case HTTP_PROGRESS_UGRADE_FAILED:
|
|
puts("http ugrade failed\n");
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
unsigned long do_http_tmp_address(void)
|
|
{
|
|
char *s = getenv ("ram_addr");
|
|
if (s) {
|
|
ulong tmp = simple_strtoul (s, NULL, 16);
|
|
return tmp;
|
|
}
|
|
return 0 /*0x80a00000*/;
|
|
}
|
|
|
|
#endif
|