mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-08-21 14:38:04 +03:00
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16048 3c298f89-4303-0410-b956-a3cf2f4a3e73
225 lines
6.4 KiB
Diff
225 lines
6.4 KiB
Diff
--- a/drivers/usb/gadget/s3c2410_udc.c
|
|
+++ b/drivers/usb/gadget/s3c2410_udc.c
|
|
@@ -74,6 +74,7 @@ static void __iomem *base_addr;
|
|
static u64 rsrc_start;
|
|
static u64 rsrc_len;
|
|
static struct dentry *s3c2410_udc_debugfs_root;
|
|
+static struct timer_list vbus_poll_timer;
|
|
|
|
static inline u32 udc_read(u32 reg)
|
|
{
|
|
@@ -134,6 +135,8 @@ static int dprintk(int level, const char
|
|
return 0;
|
|
}
|
|
#endif
|
|
+
|
|
+#ifdef CONFIG_USB_GADGET_DEBUG_FS
|
|
static int s3c2410_udc_debugfs_seq_show(struct seq_file *m, void *p)
|
|
{
|
|
u32 addr_reg,pwr_reg,ep_int_reg,usb_int_reg;
|
|
@@ -197,6 +200,7 @@ static const struct file_operations s3c2
|
|
.release = single_release,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
+#endif
|
|
|
|
/* io macros */
|
|
|
|
@@ -843,6 +847,7 @@ static void s3c2410_udc_handle_ep(struct
|
|
u32 ep_csr1;
|
|
u32 idx;
|
|
|
|
+handle_ep_again:
|
|
if (likely (!list_empty(&ep->queue)))
|
|
req = list_entry(ep->queue.next,
|
|
struct s3c2410_request, queue);
|
|
@@ -882,6 +887,8 @@ static void s3c2410_udc_handle_ep(struct
|
|
|
|
if ((ep_csr1 & S3C2410_UDC_OCSR1_PKTRDY) && req) {
|
|
s3c2410_udc_read_fifo(ep,req);
|
|
+ if (s3c2410_udc_fifo_count_out())
|
|
+ goto handle_ep_again;
|
|
}
|
|
}
|
|
}
|
|
@@ -1520,6 +1527,20 @@ static irqreturn_t s3c2410_udc_vbus_irq(
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
+static void s3c2410_udc_vbus_poll(unsigned long _data)
|
|
+{
|
|
+ struct s3c2410_udc *data = (struct s3c2410_udc *)_data;
|
|
+ int v;
|
|
+
|
|
+ dprintk(DEBUG_NORMAL, "%s()\n", __func__);
|
|
+ if (udc_info && udc_info->get_vbus_status) {
|
|
+ v = udc_info->get_vbus_status();
|
|
+ if ((v > -1) && (v != data->vbus))
|
|
+ s3c2410_udc_vbus_session(&data->gadget, v);
|
|
+ mod_timer(&vbus_poll_timer, jiffies + msecs_to_jiffies(900));
|
|
+ }
|
|
+}
|
|
+
|
|
static int s3c2410_vbus_draw(struct usb_gadget *_gadget, unsigned ma)
|
|
{
|
|
dprintk(DEBUG_NORMAL, "%s()\n", __func__);
|
|
@@ -1677,6 +1698,11 @@ int usb_gadget_register_driver(struct us
|
|
goto register_error;
|
|
}
|
|
|
|
+ if (udc_info && udc_info->get_vbus_status && !udc_info->vbus_pin) {
|
|
+ mod_timer(&vbus_poll_timer, jiffies + msecs_to_jiffies(50));
|
|
+ return 0; /* just return, vbus change will enable udc */
|
|
+ }
|
|
+
|
|
/* Enable udc */
|
|
s3c2410_udc_enable(udc);
|
|
|
|
@@ -1707,6 +1733,7 @@ int usb_gadget_unregister_driver(struct
|
|
if (driver->disconnect)
|
|
driver->disconnect(&udc->gadget);
|
|
|
|
+ driver->unbind(&udc->gadget);
|
|
device_del(&udc->gadget.dev);
|
|
udc->driver = NULL;
|
|
|
|
@@ -1893,10 +1920,16 @@ static int s3c2410_udc_probe(struct plat
|
|
}
|
|
|
|
dev_dbg(dev, "got irq %i\n", irq);
|
|
+ } else if (udc_info && udc_info->get_vbus_status) {
|
|
+ udc->vbus = 0;
|
|
+ init_timer(&vbus_poll_timer);
|
|
+ vbus_poll_timer.function = s3c2410_udc_vbus_poll;
|
|
+ vbus_poll_timer.data = (unsigned long) udc;
|
|
} else {
|
|
udc->vbus = 1;
|
|
}
|
|
|
|
+#ifdef CONFIG_USB_GADGET_DEBUG_FS
|
|
if (s3c2410_udc_debugfs_root) {
|
|
udc->regs_info = debugfs_create_file("registers", S_IRUGO,
|
|
s3c2410_udc_debugfs_root,
|
|
@@ -1904,6 +1937,7 @@ static int s3c2410_udc_probe(struct plat
|
|
if (!udc->regs_info)
|
|
dev_warn(dev, "debugfs file creation failed\n");
|
|
}
|
|
+#endif
|
|
|
|
dev_dbg(dev, "probe ok\n");
|
|
|
|
@@ -1939,6 +1973,8 @@ static int s3c2410_udc_remove(struct pla
|
|
if (udc_info && udc_info->vbus_pin > 0) {
|
|
irq = gpio_to_irq(udc_info->vbus_pin);
|
|
free_irq(irq, udc);
|
|
+ } else if (udc_info && udc_info->get_vbus_status) {
|
|
+ del_timer_sync(&vbus_poll_timer);
|
|
}
|
|
|
|
free_irq(IRQ_USBD, udc);
|
|
@@ -2013,12 +2049,14 @@ static int __init udc_init(void)
|
|
|
|
dprintk(DEBUG_NORMAL, "%s: version %s\n", gadget_name, DRIVER_VERSION);
|
|
|
|
+#ifdef CONFIG_USB_GADGET_DEBUG_FS
|
|
s3c2410_udc_debugfs_root = debugfs_create_dir(gadget_name, NULL);
|
|
if (IS_ERR(s3c2410_udc_debugfs_root)) {
|
|
printk(KERN_ERR "%s: debugfs dir creation failed %ld\n",
|
|
gadget_name, PTR_ERR(s3c2410_udc_debugfs_root));
|
|
s3c2410_udc_debugfs_root = NULL;
|
|
}
|
|
+#endif
|
|
|
|
retval = platform_driver_register(&udc_driver_2410);
|
|
if (retval)
|
|
--- a/drivers/usb/host/ohci-s3c2410.c
|
|
+++ b/drivers/usb/host/ohci-s3c2410.c
|
|
@@ -21,6 +21,8 @@
|
|
|
|
#include <linux/platform_device.h>
|
|
#include <linux/clk.h>
|
|
+#include <mach/hardware.h>
|
|
+#include <mach/regs-gpio.h>
|
|
#include <plat/usb-control.h>
|
|
|
|
#define valid_port(idx) ((idx) == 1 || (idx) == 2)
|
|
@@ -306,6 +308,42 @@ static void s3c2410_hcd_oc(struct s3c241
|
|
local_irq_restore(flags);
|
|
}
|
|
|
|
+/* switching of USB pads */
|
|
+static ssize_t show_usb_mode(struct device *dev, struct device_attribute *attr,
|
|
+ char *buf)
|
|
+{
|
|
+ if (__raw_readl(S3C24XX_MISCCR) & S3C2410_MISCCR_USBHOST)
|
|
+ return sprintf(buf, "host\n");
|
|
+
|
|
+ return sprintf(buf, "device\n");
|
|
+}
|
|
+
|
|
+static ssize_t set_usb_mode(struct device *dev, struct device_attribute *attr,
|
|
+ const char *buf, size_t count)
|
|
+{
|
|
+ if (!strncmp(buf, "host", 4)) {
|
|
+ printk(KERN_WARNING "s3c2410: changing usb to host\n");
|
|
+ s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST,
|
|
+ S3C2410_MISCCR_USBHOST);
|
|
+ /* FIXME:
|
|
+ * - call machine-specific disable-pullup function i
|
|
+ * - enable +Vbus (if hardware supports it)
|
|
+ */
|
|
+ s3c2410_gpio_setpin(S3C2410_GPB9, 0);
|
|
+ } else if (!strncmp(buf, "device", 6)) {
|
|
+ printk(KERN_WARNING "s3c2410: changing usb to device\n");
|
|
+ s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST, 0);
|
|
+ s3c2410_gpio_setpin(S3C2410_GPB9, 1);
|
|
+ } else {
|
|
+ printk(KERN_WARNING "s3c2410: unknown mode\n");
|
|
+ return -EINVAL;
|
|
+ }
|
|
+
|
|
+ return count;
|
|
+}
|
|
+
|
|
+static DEVICE_ATTR(usb_mode, S_IRUGO | S_IWUSR, show_usb_mode, set_usb_mode);
|
|
+
|
|
/* may be called without controller electrically present */
|
|
/* may be called with controller, bus, and devices active */
|
|
|
|
@@ -486,15 +524,23 @@ static int ohci_hcd_s3c2410_drv_remove(s
|
|
return 0;
|
|
}
|
|
|
|
+static int ohci_hcd_s3c2410_drv_resume(struct platform_device *pdev)
|
|
+{
|
|
+ struct usb_hcd *hcd = platform_get_drvdata(pdev);
|
|
+
|
|
+ ohci_finish_controller_resume(hcd);
|
|
+ return 0;
|
|
+}
|
|
+
|
|
static struct platform_driver ohci_hcd_s3c2410_driver = {
|
|
.probe = ohci_hcd_s3c2410_drv_probe,
|
|
.remove = ohci_hcd_s3c2410_drv_remove,
|
|
.shutdown = usb_hcd_platform_shutdown,
|
|
/*.suspend = ohci_hcd_s3c2410_drv_suspend, */
|
|
- /*.resume = ohci_hcd_s3c2410_drv_resume, */
|
|
+ .resume = ohci_hcd_s3c2410_drv_resume,
|
|
.driver = {
|
|
.owner = THIS_MODULE,
|
|
- .name = "s3c2410-ohci",
|
|
+ .name = "s3c-ohci",
|
|
},
|
|
};
|
|
|
|
--- a/arch/arm/plat-s3c24xx/include/plat/udc.h
|
|
+++ b/arch/arm/plat-s3c24xx/include/plat/udc.h
|
|
@@ -27,6 +27,7 @@ enum s3c2410_udc_cmd_e {
|
|
struct s3c2410_udc_mach_info {
|
|
void (*udc_command)(enum s3c2410_udc_cmd_e);
|
|
void (*vbus_draw)(unsigned int ma);
|
|
+ int (*get_vbus_status)(void);
|
|
unsigned int vbus_pin;
|
|
unsigned char vbus_pin_inverted;
|
|
};
|