juhosg 07073dcb27 ramips: Use doubletagging to disable ramips_esw vlan by default, it seems more reliable. ... Use doubletagging to disable ramips_esw vlan by default, it seems more reliable. Daniel Golle found an issue where sometimes (possibly only for RT3352) the default vlan disable method (clearing en_vlan, untag, doubletag and putting all ports into vlan 0) doesn't work and the packets get sent out vlan-tagged with vlan 0. Instead switch to using the doubletagging method (allow doubletagged packets, put all ports into vlan 0 with untag enabled) by default. Unless someone figures out a way to really globally disable vlan for this switch, this seems like the best (most reliable) option. I did some tests regarding maximum packet size and did not see any difference between the two methods, both allow for slightly bigger packets than the ramips_main.c ethernet driver (ping stops going through above "ping -s 1472" (1514 bytes), on the switch packets are recv_good until "ping -s 1490", or about 1532 bytes). Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33321 3c298f89-4303-0410-b956-a3cf2f4a3e73		2012-09-05 20:08:42 +00:00
..
imagebuilder	[target] derive system from hostcc to allow building inside a chroot	2012-08-22 15:07:32 +00:00
linux	ramips: Use doubletagging to disable ramips_esw vlan by default, it seems more reliable.	2012-09-05 20:08:42 +00:00
sdk	[target] derive system from hostcc to allow building inside a chroot	2012-08-22 15:07:32 +00:00
toolchain	[target] derive system from hostcc to allow building inside a chroot	2012-08-22 15:07:32 +00:00
Config.in	target: add a feature flag for RTC support	2012-05-17 15:28:09 +00:00
Makefile	target: do not make target/*/install depend on target/*/compile - removes one redundant kernel build dir call on target/install	2012-06-06 17:24:05 +00:00