qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-28 16:54:03 +02:00
Code
0876cd76ed
openwrt-xburst/target/linux/brcm63xx-2.6/patches/020-bcmdrivers.patch
florian b03a57d41e Clean up patches : remove warnings, move cli() and save_flags to spinlock mechanisms 
git-svn-id: svn://svn.openwrt.org/openwrt/branches/buildroot-ng/openwrt@4275 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-07-25 11:29:00 +00:00

3221 lines
117 KiB
Diff
Raw Blame History

diff -urN linux-2.6.17/bcmdrivers/opensource/char/serial/impl1/bcm63xx_cons.c linux-2.6.17-brcm63xx/bcmdrivers/opensource/char/serial/impl1/bcm63xx_cons.c
--- linux-2.6.17/bcmdrivers/opensource/char/serial/impl1/bcm63xx_cons.c 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.17-brcm63xx/bcmdrivers/opensource/char/serial/impl1/bcm63xx_cons.c 2006-07-25 12:57:09.000000000 +0200
@@ -0,0 +1,1056 @@
+/*
+<:copyright-gpl
+ Copyright 2002 Broadcom Corp. All Rights Reserved.
+
+ This program is free software; you can distribute it and/or modify it
+ under the terms of the GNU General Public License (Version 2) as
+ published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+:>
+*/
+
+/* Description: Serial port driver for the BCM963XX. */
+
+#define CARDNAME "bcm963xx_serial driver"
+#define VERSION "2.0"
+#define VER_STR CARDNAME " v" VERSION "\n"
+
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+
+/* for definition of struct console */
+#include <linux/console.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial.h>
+#include <asm/uaccess.h>
+
+#include <bcmtypes.h>
+#include <board.h>
+#include <bcm_map_part.h>
+#include <bcm_intr.h>
+
+static DEFINE_SPINLOCK(bcm963xx_serial_lock);
+
+extern void _putc(char);
+extern void _puts(const char *);
+
+typedef struct bcm_serial {
+ volatile Uart * port;
+ int type;
+ int flags;
+ int irq;
+ int baud_base;
+ int blocked_open;
+ unsigned short close_delay;
+ unsigned short closing_wait;
+ unsigned short line; /* port/line number */
+ unsigned short cflags; /* line configuration flag */
+ unsigned short x_char; /* xon/xoff character */
+ unsigned short read_status_mask; /* mask for read condition */
+ unsigned short ignore_status_mask; /* mask for ignore condition */
+ unsigned long event; /* mask used in BH */
+ int xmit_head; /* Position of the head */
+ int xmit_tail; /* Position of the tail */
+ int xmit_cnt; /* Count of the chars in the buffer */
+ int count; /* indicates how many times it has been opened */
+ int magic;
+
+ struct async_icount icount; /* keep track of things ... */
+ struct tty_struct *tty; /* tty associated */
+ struct termios normal_termios;
+
+ wait_queue_head_t open_wait;
+ wait_queue_head_t close_wait;
+
+ long session; /* Session of opening process */
+ long pgrp; /* pgrp of opening process */
+
+ unsigned char is_initialized;
+} Context;
+
+
+/*---------------------------------------------------------------------*/
+/* Define bits in the Interrupt Enable register */
+/*---------------------------------------------------------------------*/
+/* Enable receive interrupt */
+#define RXINT (RXFIFONE|RXOVFERR)
+
+/* Enable transmit interrupt */
+#define TXINT (TXFIFOEMT|TXUNDERR|TXOVFERR)
+
+/* Enable receiver line status interrupt */
+#define LSINT (RXBRK|RXPARERR|RXFRAMERR)
+
+#define BCM_NUM_UARTS 1
+
+#define BD_BCM63XX_TIMER_CLOCK_INPUT (FPERIPH)
+
+
+static struct bcm_serial multi[BCM_NUM_UARTS];
+static struct bcm_serial *lines[BCM_NUM_UARTS];
+static struct tty_driver serial_driver;
+static struct tty_struct *serial_table[BCM_NUM_UARTS];
+static struct termios *serial_termios[BCM_NUM_UARTS];
+static struct termios *serial_termios_locked[BCM_NUM_UARTS];
+static int serial_refcount;
+
+
+static void bcm_stop (struct tty_struct *tty);
+static void bcm_start (struct tty_struct *tty);
+static inline void receive_chars (struct bcm_serial * info);
+static int startup (struct bcm_serial *info);
+static void shutdown (struct bcm_serial * info);
+static void change_speed( volatile Uart *pUart, tcflag_t cFlag );
+static void bcm63xx_cons_flush_chars (struct tty_struct *tty);
+static int bcm63xx_cons_write (struct tty_struct *tty, int from_user,
+ const unsigned char *buf, int count);
+static int bcm63xx_cons_write_room (struct tty_struct *tty);
+static int bcm_chars_in_buffer (struct tty_struct *tty);
+static void bcm_flush_buffer (struct tty_struct *tty);
+static void bcm_throttle (struct tty_struct *tty);
+static void bcm_unthrottle (struct tty_struct *tty);
+static void bcm_send_xchar (struct tty_struct *tty, char ch);
+static int get_serial_info(struct bcm_serial *info, struct serial_struct *retinfo);
+static int set_serial_info (struct bcm_serial *info, struct serial_struct *new_info);
+static int get_lsr_info (struct bcm_serial *info, unsigned int *value);
+static void send_break (struct bcm_serial *info, int duration);
+static int bcm_ioctl (struct tty_struct * tty, struct file * file,
+ unsigned int cmd, unsigned long arg);
+static void bcm_set_termios (struct tty_struct *tty, struct termios *old_termios);
+static void bcm63xx_cons_close (struct tty_struct *tty, struct file *filp);
+static void bcm_hangup (struct tty_struct *tty);
+static int block_til_ready (struct tty_struct *tty, struct file *filp, struct bcm_serial *info);
+static int bcm63xx_cons_open (struct tty_struct * tty, struct file * filp);
+static int __init bcm63xx_serialinit(void);
+
+
+/*
+ * ------------------------------------------------------------
+ * rs_stop () and rs_start ()
+ *
+ * These routines are called before setting or resetting
+ * tty->stopped. They enable or disable transmitter interrupts,
+ * as necessary.
+ * ------------------------------------------------------------
+ */
+static void bcm_stop (struct tty_struct *tty)
+{
+}
+
+static void bcm_start (struct tty_struct *tty)
+{
+ _puts(CARDNAME " Start\n");
+}
+
+/*
+ * ------------------------------------------------------------
+ * receive_char ()
+ *
+ * This routine deals with inputs from any lines.
+ * ------------------------------------------------------------
+ */
+static inline void receive_chars (struct bcm_serial * info)
+{
+ struct tty_struct *tty = 0;
+ struct async_icount * icount;
+ int ignore = 0;
+ unsigned short status, tmp;
+ UCHAR ch = 0;
+ while ((status = info->port->intStatus) & RXINT)
+ {
+ char flag_char = 0;
+
+ if (status & RXFIFONE)
+ ch = info->port->Data; // Read the character
+ tty = info->tty; /* now tty points to the proper dev */
+ icount = &info->icount;
+ if (! tty)
+ break;
+ if (!tty_buffer_request_room(tty, 1))
+ break;
+ icount->rx++;
+ if (status & RXBRK)
+ {
+ flag_char = TTY_BREAK;
+ icount->brk++;
+ }
+ // keep track of the statistics
+ if (status & (RXFRAMERR | RXPARERR | RXOVFERR))
+ {
+ if (status & RXPARERR) /* parity error */
+ icount->parity++;
+ else
+ if (status & RXFRAMERR) /* frame error */
+ icount->frame++;
+ if (status & RXOVFERR)
+ {
+ // Overflow. Reset the RX FIFO
+ info->port->fifoctl |= RSTRXFIFOS;
+ icount->overrun++;
+ }
+ // check to see if we should ignore the character
+ // and mask off conditions that should be ignored
+ if (status & info->ignore_status_mask)
+ {
+ if (++ignore > 100 )
+ break;
+ goto ignore_char;
+ }
+ // Mask off the error conditions we want to ignore
+ tmp = status & info->read_status_mask;
+ if (tmp & RXPARERR)
+ {
+ flag_char = TTY_PARITY;
+ }
+ else
+ if (tmp & RXFRAMERR)
+ {
+ flag_char = TTY_FRAME;
+ }
+ if (tmp & RXOVFERR)
+ {
+ tty_insert_flip_char(tty, ch, flag_char);
+ ch = 0;
+ flag_char = TTY_OVERRUN;
+ if (!tty_buffer_request_room(tty, 1))
+ break;
+ }
+ }
+ tty_insert_flip_char(tty, ch, flag_char);
+ }
+ignore_char:
+ if (tty)
+ tty_flip_buffer_push(tty);
+}
+
+
+/*
+ * ------------------------------------------------------------
+ * bcm_interrupt ()
+ *
+ * this is the main interrupt routine for the chip.
+ * It deals with the multiple ports.
+ * ------------------------------------------------------------
+ */
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
+static irqreturn_t bcm_interrupt (int irq, void * dev, struct pt_regs * regs)
+#else
+static void bcm_interrupt (int irq, void * dev, struct pt_regs * regs)
+#endif
+{
+ struct bcm_serial * info = lines[0];
+ UINT16 intStat;
+
+ /* get pending interrupt flags from UART */
+
+ /* Mask with only the serial interrupts that are enabled */
+ intStat = info->port->intStatus & info->port->intMask;
+ while (intStat)
+ {
+ if (intStat & RXINT)
+ receive_chars (info);
+ else
+ if (intStat & TXINT)
+ info->port->intStatus = TXINT;
+ else /* don't know what it was, so let's mask it */
+ info->port->intMask &= ~intStat;
+
+ intStat = info->port->intStatus & info->port->intMask;
+ }
+
+ // Clear the interrupt
+ BcmHalInterruptEnable (INTERRUPT_ID_UART);
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
+ return IRQ_HANDLED;
+#endif
+}
+
+/*
+ * -------------------------------------------------------------------
+ * startup ()
+ *
+ * various initialization tasks
+ * -------------------------------------------------------------------
+ */
+static int startup (struct bcm_serial *info)
+{
+ // Port is already started...
+ return 0;
+}
+
+/*
+ * -------------------------------------------------------------------
+ * shutdown ()
+ *
+ * This routine will shutdown a serial port; interrupts are disabled, and
+ * DTR is dropped if the hangup on close termio flag is on.
+ * -------------------------------------------------------------------
+ */
+static void shutdown (struct bcm_serial * info)
+{
+ unsigned long flags;
+ if (!info->is_initialized)
+ return;
+
+
+ /*save_flags (flags);
+ cli ();*/
+ spin_lock_irqsave(&bcm963xx_serial_lock, flags);
+
+ info->port->control &= ~(BRGEN|TXEN|RXEN);
+ if (info->tty)
+ set_bit (TTY_IO_ERROR, &info->tty->flags);
+ info->is_initialized = 0;
+
+ //restore_flags (flags);
+ spin_unlock_irqrestore(&bcm963xx_serial_lock, flags);
+}
+/*
+ * -------------------------------------------------------------------
+ * change_speed ()
+ *
+ * Set the baud rate, character size, parity and stop bits.
+ * -------------------------------------------------------------------
+ */
+static void change_speed( volatile Uart *pUart, tcflag_t cFlag )
+{
+ unsigned long ulFlags, ulBaud, ulClockFreqHz, ulTmp;
+ /*save_flags(ulFlags);
+ cli();*/
+ spin_lock_irqsave(&bcm963xx_serial_lock, ulFlags);
+
+ switch( cFlag & (CBAUD | CBAUDEX) )
+ {
+ case B115200:
+ ulBaud = 115200;
+ break;
+ case B57600:
+ ulBaud = 57600;
+ break;
+ case B38400:
+ ulBaud = 38400;
+ break;
+ case B19200:
+ ulBaud = 19200;
+ break;
+ case B9600:
+ ulBaud = 9600;
+ break;
+ case B4800:
+ ulBaud = 4800;
+ break;
+ case B2400:
+ ulBaud = 2400;
+ break;
+ case B1800:
+ ulBaud = 1800;
+ break;
+ case B1200:
+ ulBaud = 1200;
+ break;
+ case B600:
+ ulBaud = 600;
+ break;
+ case B300:
+ ulBaud = 300;
+ break;
+ case B200:
+ ulBaud = 200;
+ break;
+ case B150:
+ ulBaud = 150;
+ break;
+ case B134:
+ ulBaud = 134;
+ break;
+ case B110:
+ ulBaud = 110;
+ break;
+ case B75:
+ ulBaud = 75;
+ break;
+ case B50:
+ ulBaud = 50;
+ break;
+ default:
+ ulBaud = 115200;
+ break;
+ }
+
+ /* Calculate buad rate. */
+ ulClockFreqHz = BD_BCM63XX_TIMER_CLOCK_INPUT;
+ ulTmp = (ulClockFreqHz / ulBaud) / 16;
+ if( ulTmp & 0x01 )
+ ulTmp /= 2; /* Rounding up, so sub is already accounted for */
+ else
+ ulTmp = (ulTmp / 2) - 1; /* Rounding down so we must sub 1 */
+ pUart->baudword = ulTmp;
+
+ /* Set character size, stop bits and parity. */
+ switch( cFlag & CSIZE )
+ {
+ case CS5:
+ ulTmp = BITS5SYM; /* select transmit 5 bit data size */
+ break;
+ case CS6:
+ ulTmp = BITS6SYM; /* select transmit 6 bit data size */
+ break;
+ case CS7:
+ ulTmp = BITS7SYM; /* select transmit 7 bit data size */
+ break;
+ /*case CS8:*/
+ default:
+ ulTmp = BITS8SYM; /* select transmit 8 bit data size */
+ break;
+ }
+ if( cFlag & CSTOPB )
+ ulTmp |= TWOSTOP; /* select 2 stop bits */
+ else
+ ulTmp |= ONESTOP; /* select one stop bit */
+
+ /* Write these values into the config reg. */
+ pUart->config = ulTmp;
+ pUart->control &= ~(RXPARITYEN | TXPARITYEN | RXPARITYEVEN | TXPARITYEVEN);
+ switch( cFlag & (PARENB | PARODD) )
+ {
+ case PARENB|PARODD:
+ pUart->control |= RXPARITYEN | TXPARITYEN;
+ break;
+ case PARENB:
+ pUart->control |= RXPARITYEN | TXPARITYEN | RXPARITYEVEN | TXPARITYEVEN;
+ break;
+ default:
+ pUart->control |= 0;
+ break;
+ }
+
+ /* Reset and flush uart */
+ pUart->fifoctl = RSTTXFIFOS | RSTRXFIFOS;
+ //restore_flags( ulFlags );
+ spin_unlock_irqrestore(&bcm963xx_serial_lock, ulFlags);
+}
+
+
+/*
+ * -------------------------------------------------------------------
+ * bcm_flush_char ()
+ *
+ * Nothing to flush. Polled I/O is used.
+ * -------------------------------------------------------------------
+ */
+static void bcm63xx_cons_flush_chars (struct tty_struct *tty)
+{
+}
+
+
+/*
+ * -------------------------------------------------------------------
+ * bcm63xx_cons_write ()
+ *
+ * Main output routine using polled I/O.
+ * -------------------------------------------------------------------
+ */
+static int bcm63xx_cons_write (struct tty_struct *tty, int from_user,
+ const unsigned char *buf, int count)
+{
+ int c;
+
+ for (c = 0; c < count; c++)
+ _putc(buf[c]);
+ return count;
+}
+
+/*
+ * -------------------------------------------------------------------
+ * bcm63xx_cons_write_room ()
+ *
+ * Compute the amount of space available for writing.
+ * -------------------------------------------------------------------
+ */
+static int bcm63xx_cons_write_room (struct tty_struct *tty)
+{
+ /* Pick a number. Any number. Polled I/O is used. */
+ return 1024;
+}
+
+/*
+ * -------------------------------------------------------------------
+ * bcm_chars_in_buffer ()
+ *
+ * compute the amount of char left to be transmitted
+ * -------------------------------------------------------------------
+ */
+static int bcm_chars_in_buffer (struct tty_struct *tty)
+{
+ return 0;
+}
+
+/*
+ * -------------------------------------------------------------------
+ * bcm_flush_buffer ()
+ *
+ * Empty the output buffer
+ * -------------------------------------------------------------------
+ */
+static void bcm_flush_buffer (struct tty_struct *tty)
+{
+}
+
+/*
+ * ------------------------------------------------------------
+ * bcm_throttle () and bcm_unthrottle ()
+ *
+ * This routine is called by the upper-layer tty layer to signal that
+ * incoming characters should be throttled (or not).
+ * ------------------------------------------------------------
+ */
+static void bcm_throttle (struct tty_struct *tty)
+{
+ struct bcm_serial *info = (struct bcm_serial *)tty->driver_data;
+ if (I_IXOFF(tty))
+ info->x_char = STOP_CHAR(tty);
+}
+
+static void bcm_unthrottle (struct tty_struct *tty)
+{
+ struct bcm_serial *info = (struct bcm_serial *)tty->driver_data;
+ if (I_IXOFF(tty))
+ {
+ if (info->x_char)
+ info->x_char = 0;
+ else
+ info->x_char = START_CHAR(tty);
+ }
+}
+
+static void bcm_send_xchar (struct tty_struct *tty, char ch)
+{
+ struct bcm_serial *info = (struct bcm_serial *)tty->driver_data;
+ info->x_char = ch;
+ if (ch)
+ bcm_start (info->tty);
+}
+
+/*
+ * ------------------------------------------------------------
+ * rs_ioctl () and friends
+ * ------------------------------------------------------------
+ */
+static int get_serial_info(struct bcm_serial *info, struct serial_struct *retinfo)
+{
+ struct serial_struct tmp;
+
+ if (!retinfo)
+ return -EFAULT;
+
+ memset (&tmp, 0, sizeof(tmp));
+ tmp.type = info->type;
+ tmp.line = info->line;
+ tmp.port = (int) info->port;
+ tmp.irq = info->irq;
+ tmp.flags = 0;
+ tmp.baud_base = info->baud_base;
+ tmp.close_delay = info->close_delay;
+ tmp.closing_wait = info->closing_wait;
+
+ return copy_to_user (retinfo, &tmp, sizeof(*retinfo));
+}
+
+static int set_serial_info (struct bcm_serial *info, struct serial_struct *new_info)
+{
+ struct serial_struct new_serial;
+ struct bcm_serial old_info;
+ int retval = 0;
+
+ if (!new_info)
+ return -EFAULT;
+
+ copy_from_user (&new_serial, new_info, sizeof(new_serial));
+ old_info = *info;
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+
+
+ if (info->count > 1)
+ return -EBUSY;
+
+ /* OK, past this point, all the error checking has been done.
+ * At this point, we start making changes.....
+ */
+ info->baud_base = new_serial.baud_base;
+ info->type = new_serial.type;
+ info->close_delay = new_serial.close_delay;
+ info->closing_wait = new_serial.closing_wait;
+ retval = startup (info);
+ return retval;
+}
+
+/*
+ * get_lsr_info - get line status register info
+ *
+ * Purpose: Let user call ioctl() to get info when the UART physically
+ * is emptied. On bus types like RS485, the transmitter must
+ * release the bus after transmitting. This must be done when
+ * the transmit shift register is empty, not be done when the
+ * transmit holding register is empty. This functionality
+ * allows an RS485 driver to be written in user space.
+ */
+static int get_lsr_info (struct bcm_serial *info, unsigned int *value)
+{
+ return( 0 );
+}
+
+/*
+ * This routine sends a break character out the serial port.
+ */
+static void send_break (struct bcm_serial *info, int duration)
+{
+ unsigned long flags;
+
+ if (!info->port)
+ return;
+
+ current->state = TASK_INTERRUPTIBLE;
+
+ /*save_flags (flags);
+ cli();*/
+ spin_lock_irqsave(&bcm963xx_serial_lock, flags);
+
+ info->port->control |= XMITBREAK;
+ schedule_timeout(duration);
+ info->port->control &= ~XMITBREAK;
+
+ spin_unlock_irqrestore(&bcm963xx_serial_lock, flags);
+ //restore_flags (flags);
+}
+
+static int bcm_ioctl (struct tty_struct * tty, struct file * file,
+ unsigned int cmd, unsigned long arg)
+{
+ int error;
+ struct bcm_serial * info = (struct bcm_serial *)tty->driver_data;
+ int retval;
+
+ if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
+ (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGWILD) &&
+ (cmd != TIOCSERSWILD) && (cmd != TIOCSERGSTRUCT))
+ {
+ if (tty->flags & (1 << TTY_IO_ERROR))
+ return -EIO;
+ }
+ switch (cmd)
+ {
+
+ case TCSBRK: /* SVID version: non-zero arg --> no break */
+ retval = tty_check_change (tty);
+ if (retval)
+ return retval;
+ tty_wait_until_sent (tty, 0);
+ if (!arg)
+ send_break (info, HZ/4); /* 1/4 second */
+ return 0;
+
+ case TCSBRKP: /* support for POSIX tcsendbreak() */
+ retval = tty_check_change (tty);
+ if (retval)
+ return retval;
+ tty_wait_until_sent (tty, 0);
+ send_break (info, arg ? arg*(HZ/10) : HZ/4);
+ return 0;
+
+ case TIOCGSOFTCAR:
+ error = access_ok (VERIFY_WRITE, (void *)arg, sizeof(long));
+ if (!error)
+ return -EFAULT;
+ else
+ {
+ put_user (C_CLOCAL(tty) ? 1 : 0, (unsigned long *)arg);
+ return 0;
+ }
+
+ case TIOCSSOFTCAR:
+ error = get_user (arg, (unsigned long *)arg);
+ if (error)
+ return error;
+ tty->termios->c_cflag = ((tty->termios->c_cflag & ~CLOCAL) | (arg ? CLOCAL : 0));
+ return 0;
+
+ case TIOCGSERIAL:
+ error = access_ok (VERIFY_WRITE, (void *)arg, sizeof(struct serial_struct));
+ if (!error)
+ return -EFAULT;
+ else
+ return get_serial_info (info, (struct serial_struct *)arg);
+
+ case TIOCSSERIAL:
+ return set_serial_info (info, (struct serial_struct *) arg);
+
+ case TIOCSERGETLSR: /* Get line status register */
+ error = access_ok (VERIFY_WRITE, (void *)arg, sizeof(unsigned int));
+ if (!error)
+ return -EFAULT;
+ else
+ return get_lsr_info (info, (unsigned int *)arg);
+
+ case TIOCSERGSTRUCT:
+ error = access_ok (VERIFY_WRITE, (void *)arg, sizeof(struct bcm_serial));
+ if (!error)
+ return -EFAULT;
+ else
+ {
+ copy_to_user((struct bcm_serial *)arg, info, sizeof(struct bcm_serial));
+ return 0;
+ }
+
+ default:
+ return -ENOIOCTLCMD;
+ }
+ return 0;
+}
+
+static void bcm_set_termios (struct tty_struct *tty, struct termios *old_termios)
+{
+ struct bcm_serial *info = (struct bcm_serial *)tty->driver_data;
+
+ if( tty->termios->c_cflag != old_termios->c_cflag )
+ change_speed (info->port, tty->termios->c_cflag);
+}
+
+/*
+ * ------------------------------------------------------------
+ * bcm63xx_cons_close()
+ *
+ * This routine is called when the serial port gets closed. First, we
+ * wait for the last remaining data to be sent. Then, we turn off
+ * the transmit enable and receive enable flags.
+ * ------------------------------------------------------------
+ */
+static void bcm63xx_cons_close (struct tty_struct *tty, struct file *filp)
+{
+ struct bcm_serial * info = (struct bcm_serial *)tty->driver_data;
+ unsigned long flags;
+
+ if (!info)
+ return;
+
+ /*save_flags (flags);
+ cli();*/
+ spin_lock_irqsave(&bcm963xx_serial_lock, flags);
+
+ if (tty_hung_up_p (filp))
+ {
+ spin_unlock_irqrestore(&bcm963xx_serial_lock, flags);
+ //restore_flags (flags);
+ return;
+ }
+
+ if ((tty->count == 1) && (info->count != 1))
+ {
+
+ /* Uh, oh. tty->count is 1, which means that the tty
+ * structure will be freed. Info->count should always
+ * be one in these conditions. If it's greater than
+ * one, we've got real problems, since it means the
+ * serial port won't be shutdown.
+ */
+ printk("bcm63xx_cons_close: bad serial port count; tty->count is 1, "
+ "info->count is %d\n", info->count);
+ info->count = 1;
+ }
+
+ if (--info->count < 0)
+ {
+ printk("ds_close: bad serial port count for ttys%d: %d\n",
+ info->line, info->count);
+ info->count = 0;
+ }
+
+ if (info->count)
+ {
+ //restore_flags (flags);
+ spin_unlock_irqrestore(&bcm963xx_serial_lock, flags);
+ return;
+ }
+
+ /* Now we wait for the transmit buffer to clear; and we notify
+ * the line discipline to only process XON/XOFF characters.
+ */
+ tty->closing = 1;
+
+ /* At this point we stop accepting input. To do this, we
+ * disable the receive line status interrupts.
+ */
+ shutdown (info);
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
+ if (tty->driver->flush_buffer)
+ tty->driver->flush_buffer (tty);
+#else
+ if (tty->driver.flush_buffer)
+ tty->driver.flush_buffer (tty);
+#endif
+ if (tty->ldisc.flush_buffer)
+ tty->ldisc.flush_buffer (tty);
+
+ tty->closing = 0;
+ info->event = 0;
+ info->tty = 0;
+ if (tty->ldisc.num != tty_ldisc_get(N_TTY)->num)
+ {
+ if (tty->ldisc.close)
+ (tty->ldisc.close)(tty);
+ tty->ldisc = *tty_ldisc_get(N_TTY);
+ tty->termios->c_line = N_TTY;
+ if (tty->ldisc.open)
+ (tty->ldisc.open)(tty);
+ }
+ if (info->blocked_open)
+ {
+ if (info->close_delay)
+ {
+ current->state = TASK_INTERRUPTIBLE;
+ schedule_timeout(info->close_delay);
+ }
+ wake_up_interruptible (&info->open_wait);
+ }
+ wake_up_interruptible (&info->close_wait);
+
+ //restore_flags (flags);
+ spin_unlock_irqrestore(&bcm963xx_serial_lock, flags);
+}
+
+/*
+ * bcm_hangup () --- called by tty_hangup() when a hangup is signaled.
+ */
+static void bcm_hangup (struct tty_struct *tty)
+{
+
+ struct bcm_serial *info = (struct bcm_serial *)tty->driver_data;
+
+ shutdown (info);
+ info->event = 0;
+ info->count = 0;
+ info->tty = 0;
+ wake_up_interruptible (&info->open_wait);
+}
+
+/*
+ * ------------------------------------------------------------
+ * rs_open() and friends
+ * ------------------------------------------------------------
+ */
+static int block_til_ready (struct tty_struct *tty, struct file *filp,
+ struct bcm_serial *info)
+{
+ return 0;
+}
+
+/*
+ * This routine is called whenever a serial port is opened. It
+ * enables interrupts for a serial port. It also performs the
+ * serial-specific initialization for the tty structure.
+ */
+static int bcm63xx_cons_open (struct tty_struct * tty, struct file * filp)
+{
+ struct bcm_serial *info;
+ int retval, line;
+
+ // Make sure we're only opening on of the ports we support
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
+ line = MINOR(tty->driver->cdev.dev) - tty->driver->minor_start;
+#else
+ line = MINOR(tty->device) - tty->driver.minor_start;
+#endif
+
+ if ((line < 0) || (line >= BCM_NUM_UARTS))
+ return -ENODEV;
+
+ info = lines[line];
+
+ info->port->intMask = 0; /* Clear any pending interrupts */
+ info->port->intMask = RXINT; /* Enable RX */
+
+ info->count++;
+ tty->driver_data = info;
+ info->tty = tty;
+ BcmHalInterruptEnable (INTERRUPT_ID_UART);
+
+ // Start up serial port
+ retval = startup (info);
+ if (retval)
+ return retval;
+
+ retval = block_til_ready (tty, filp, info);
+ if (retval)
+ return retval;
+
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
+ info->pgrp = process_group(current);
+ info->session = current->signal->session;
+#else
+ info->session = current->session;
+ info->pgrp = current->pgrp;
+#endif
+
+ return 0;
+}
+
+/* --------------------------------------------------------------------------
+ Name: bcm63xx_serialinit
+ Purpose: Initialize our BCM63xx serial driver
+-------------------------------------------------------------------------- */
+static int __init bcm63xx_serialinit(void)
+{
+ int i, flags;
+ struct bcm_serial * info;
+
+ // Print the driver version information
+ printk(VER_STR);
+
+ memset(&serial_driver, 0, sizeof(struct tty_driver));
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
+ serial_driver.owner = THIS_MODULE;
+ serial_driver.devfs_name = "tts/";
+#endif
+ serial_driver.magic = TTY_DRIVER_MAGIC;
+ serial_driver.name = "ttyS";
+ serial_driver.major = TTY_MAJOR;
+ serial_driver.minor_start = 64;
+ serial_driver.num = BCM_NUM_UARTS;
+ serial_driver.type = TTY_DRIVER_TYPE_SERIAL;
+ serial_driver.subtype = SERIAL_TYPE_NORMAL;
+ serial_driver.init_termios = tty_std_termios;
+ serial_driver.init_termios.c_cflag = B115200 | CS8 | CREAD | CLOCAL;
+ serial_driver.flags = TTY_DRIVER_REAL_RAW;
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
+ serial_driver.refcount = serial_refcount;
+ serial_driver.ttys = serial_table;
+#else
+ serial_driver.refcount = &serial_refcount;
+ serial_driver.table = serial_table;
+#endif
+
+ serial_driver.termios = serial_termios;
+ serial_driver.termios_locked = serial_termios_locked;
+ serial_driver.open = bcm63xx_cons_open;
+ serial_driver.close = bcm63xx_cons_close;
+ serial_driver.write = bcm63xx_cons_write;
+ serial_driver.flush_chars = bcm63xx_cons_flush_chars;
+ serial_driver.write_room = bcm63xx_cons_write_room;
+ serial_driver.chars_in_buffer = bcm_chars_in_buffer;
+ serial_driver.flush_buffer = bcm_flush_buffer;
+ serial_driver.ioctl = bcm_ioctl;
+ serial_driver.throttle = bcm_throttle;
+ serial_driver.unthrottle = bcm_unthrottle;
+ serial_driver.send_xchar = bcm_send_xchar;
+ serial_driver.set_termios = bcm_set_termios;
+ serial_driver.stop = bcm_stop;
+ serial_driver.start = bcm_start;
+ serial_driver.hangup = bcm_hangup;
+
+ if (tty_register_driver (&serial_driver))
+ panic("Couldn't register serial driver\n");
+
+ //save_flags(flags); cli();
+ spin_lock_irqsave(&bcm963xx_serial_lock, flags);
+
+ for (i = 0; i < BCM_NUM_UARTS; i++)
+ {
+ info = &multi[i];
+ lines[i] = info;
+ info->port = (Uart *) ((char *)UART_BASE + (i * 0x20));
+ info->irq = (2 - i) + 8;
+ info->line = i;
+ info->tty = 0;
+ info->close_delay = 50;
+ info->closing_wait = 3000;
+ info->x_char = 0;
+ info->event = 0;
+ info->count = 0;
+ info->blocked_open = 0;
+ info->normal_termios = serial_driver.init_termios;
+ init_waitqueue_head(&info->open_wait);
+ init_waitqueue_head(&info->close_wait);
+
+ /* If we are pointing to address zero then punt - not correctly
+ * set up in setup.c to handle this.
+ */
+ if (! info->port)
+ return 0;
+ BcmHalMapInterrupt(bcm_interrupt, 0, INTERRUPT_ID_UART);
+ }
+
+ /* order matters here... the trick is that flags
+ * is updated... in request_irq - to immediatedly obliterate
+ * it is unwise.
+ */
+ //restore_flags(flags);
+ spin_unlock_irqrestore(&bcm963xx_serial_lock, flags);
+ return 0;
+}
+
+module_init(bcm63xx_serialinit);
+
+/* --------------------------------------------------------------------------
+ Name: bcm_console_print
+ Purpose: bcm_console_print is registered for printk.
+ The console_lock must be held when we get here.
+-------------------------------------------------------------------------- */
+static void bcm_console_print (struct console * cons, const char * str,
+ unsigned int count)
+{
+ unsigned int i;
+ //_puts(str);
+ for(i=0; i<count; i++, str++)
+ {
+ _putc(*str);
+ if (*str == 10)
+ {
+ _putc(13);
+ }
+ }
+}
+
+static struct tty_driver * bcm_console_device(struct console * c, int *index)
+{
+ *index = c->index;
+ return &serial_driver;
+}
+
+static int __init bcm_console_setup(struct console * co, char * options)
+{
+ return 0;
+}
+
+static struct console bcm_sercons = {
+ .name = "ttyS",
+ .write = bcm_console_print,
+ .device = bcm_console_device,
+ .setup = bcm_console_setup,
+ .flags = CON_PRINTBUFFER, // CON_CONSDEV, CONSOLE_LINE,
+ .index = -1,
+};
+
+static int __init bcm63xx_console_init(void)
+{
+ register_console(&bcm_sercons);
+ return 0;
+}
+
+console_initcall(bcm63xx_console_init);
diff -urN linux-2.6.17/bcmdrivers/opensource/char/serial/impl1/Makefile linux-2.6.17-brcm63xx/bcmdrivers/opensource/char/serial/impl1/Makefile
--- linux-2.6.17/bcmdrivers/opensource/char/serial/impl1/Makefile 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.17-brcm63xx/bcmdrivers/opensource/char/serial/impl1/Makefile 2006-07-25 10:43:50.000000000 +0200
@@ -0,0 +1,13 @@
+# File: bcmdrivers/opensource/char/serial
+#
+# Makefile for the BCM63xx serial/console driver
+
+obj-$(CONFIG_BCM_SERIAL) += bcm63xx_cons.o
+
+EXTRA_CFLAGS += -I$(INC_BRCMDRIVER_PUB_PATH)/$(BRCM_BOARD)
+
+-include $(TOPDIR)/Rules.make
+
+clean:
+ rm -f core *.o *.a *.s
+
diff -urN linux-2.6.17/bcmdrivers/opensource/include/bcm963xx/6338_intr.h linux-2.6.17-brcm63xx/bcmdrivers/opensource/include/bcm963xx/6338_intr.h
--- linux-2.6.17/bcmdrivers/opensource/include/bcm963xx/6338_intr.h 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.17-brcm63xx/bcmdrivers/opensource/include/bcm963xx/6338_intr.h 2006-07-25 10:44:46.000000000 +0200
@@ -0,0 +1,64 @@
+/*
+<:copyright-gpl
+ Copyright 2003 Broadcom Corp. All Rights Reserved.
+
+ This program is free software; you can distribute it and/or modify it
+ under the terms of the GNU General Public License (Version 2) as
+ published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+:>
+*/
+
+#ifndef __6338_INTR_H
+#define __6338_INTR_H
+
+/*=====================================================================*/
+/* BCM6338 External Interrupt Level Assignments */
+/*=====================================================================*/
+#define INTERRUPT_ID_EXTERNAL_0 3
+#define INTERRUPT_ID_EXTERNAL_1 4
+#define INTERRUPT_ID_EXTERNAL_2 5
+#define INTERRUPT_ID_EXTERNAL_3 6
+
+/*=====================================================================*/
+/* BCM6338 Timer Interrupt Level Assignments */
+/*=====================================================================*/
+#define MIPS_TIMER_INT 7
+
+/*=====================================================================*/
+/* Peripheral ISR Table Offset */
+/*=====================================================================*/
+#define INTERNAL_ISR_TABLE_OFFSET 8
+
+/*=====================================================================*/
+/* Logical Peripheral Interrupt IDs */
+/*=====================================================================*/
+
+#define INTERRUPT_ID_TIMER (INTERNAL_ISR_TABLE_OFFSET + 0)
+#define INTERRUPT_ID_SPI (INTERNAL_ISR_TABLE_OFFSET + 1)
+#define INTERRUPT_ID_UART (INTERNAL_ISR_TABLE_OFFSET + 2)
+#define INTERRUPT_ID_DG (INTERNAL_ISR_TABLE_OFFSET + 4)
+#define INTERRUPT_ID_ADSL (INTERNAL_ISR_TABLE_OFFSET + 5)
+#define INTERRUPT_ID_ATM (INTERNAL_ISR_TABLE_OFFSET + 6)
+#define INTERRUPT_ID_USBS (INTERNAL_ISR_TABLE_OFFSET + 7)
+#define INTERRUPT_ID_EMAC1 (INTERNAL_ISR_TABLE_OFFSET + 8)
+#define INTERRUPT_ID_EPHY (INTERNAL_ISR_TABLE_OFFSET + 9)
+#define INTERRUPT_ID_SDRAM (INTERNAL_ISR_TABLE_OFFSET + 10)
+#define INTERRUPT_ID_USB_CNTL_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 11)
+#define INTERRUPT_ID_USB_CNTL_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 12)
+#define INTERRUPT_ID_USB_BULK_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 13)
+#define INTERRUPT_ID_USB_BULK_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 14)
+#define INTERRUPT_ID_EMAC1_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 15)
+#define INTERRUPT_ID_EMAC1_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 16)
+#define INTERRUPT_ID_SDIO (INTERNAL_ISR_TABLE_OFFSET + 17)
+
+#endif /* __BCM6338_H */
+
diff -urN linux-2.6.17/bcmdrivers/opensource/include/bcm963xx/6338_map_part.h linux-2.6.17-brcm63xx/bcmdrivers/opensource/include/bcm963xx/6338_map_part.h
--- linux-2.6.17/bcmdrivers/opensource/include/bcm963xx/6338_map_part.h 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.17-brcm63xx/bcmdrivers/opensource/include/bcm963xx/6338_map_part.h 2006-07-25 10:44:59.000000000 +0200
@@ -0,0 +1,334 @@
+/*
+<:copyright-gpl
+ Copyright 2004 Broadcom Corp. All Rights Reserved.
+
+ This program is free software; you can distribute it and/or modify it
+ under the terms of the GNU General Public License (Version 2) as
+ published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+:>
+*/
+
+#ifndef __BCM6338_MAP_H
+#define __BCM6338_MAP_H
+
+#include "bcmtypes.h"
+
+#define PERF_BASE 0xfffe0000
+#define TIMR_BASE 0xfffe0200
+#define UART_BASE 0xfffe0300
+#define GPIO_BASE 0xfffe0400
+#define SPI_BASE 0xfffe0c00
+
+typedef struct PerfControl {
+ uint32 RevID;
+ uint16 testControl;
+ uint16 blkEnables;
+#define EMAC_CLK_EN 0x0010
+#define USBS_CLK_EN 0x0010
+#define SAR_CLK_EN 0x0020
+
+#define SPI_CLK_EN 0x0200
+
+ uint32 pll_control;
+#define SOFT_RESET 0x00000001
+
+ uint32 IrqMask;
+ uint32 IrqStatus;
+
+ uint32 ExtIrqCfg;
+#define EI_SENSE_SHFT 0
+#define EI_STATUS_SHFT 5
+#define EI_CLEAR_SHFT 10
+#define EI_MASK_SHFT 15
+#define EI_INSENS_SHFT 20
+#define EI_LEVEL_SHFT 25
+
+ uint32 unused[4]; /* (18) */
+ uint32 BlockSoftReset; /* (28) */
+#define BSR_SPI 0x00000001
+#define BSR_EMAC 0x00000004
+#define BSR_USBH 0x00000008
+#define BSR_USBS 0x00000010
+#define BSR_ADSL 0x00000020
+#define BSR_DMAMEM 0x00000040
+#define BSR_SAR 0x00000080
+#define BSR_ACLC 0x00000100
+#define BSR_ADSL_MIPS_PLL 0x00000400
+#define BSR_ALL_BLOCKS \
+ (BSR_SPI | BSR_EMAC | BSR_USBH | BSR_USBS | BSR_ADSL | BSR_DMAMEM | \
+ BSR_SAR | BSR_ACLC | BSR_ADSL_MIPS_PLL)
+} PerfControl;
+
+#define PERF ((volatile PerfControl * const) PERF_BASE)
+
+
+typedef struct Timer {
+ uint16 unused0;
+ byte TimerMask;
+#define TIMER0EN 0x01
+#define TIMER1EN 0x02
+#define TIMER2EN 0x04
+ byte TimerInts;
+#define TIMER0 0x01
+#define TIMER1 0x02
+#define TIMER2 0x04
+#define WATCHDOG 0x08
+ uint32 TimerCtl0;
+ uint32 TimerCtl1;
+ uint32 TimerCtl2;
+#define TIMERENABLE 0x80000000
+#define RSTCNTCLR 0x40000000
+ uint32 TimerCnt0;
+ uint32 TimerCnt1;
+ uint32 TimerCnt2;
+ uint32 WatchDogDefCount;
+
+ /* Write 0xff00 0x00ff to Start timer
+ * Write 0xee00 0x00ee to Stop and re-load default count
+ * Read from this register returns current watch dog count
+ */
+ uint32 WatchDogCtl;
+
+ /* Number of 40-MHz ticks for WD Reset pulse to last */
+ uint32 WDResetCount;
+} Timer;
+
+#define TIMER ((volatile Timer * const) TIMR_BASE)
+typedef struct UartChannel {
+ byte unused0;
+ byte control;
+#define BRGEN 0x80 /* Control register bit defs */
+#define TXEN 0x40
+#define RXEN 0x20
+#define LOOPBK 0x10
+#define TXPARITYEN 0x08
+#define TXPARITYEVEN 0x04
+#define RXPARITYEN 0x02
+#define RXPARITYEVEN 0x01
+
+ byte config;
+#define XMITBREAK 0x40
+#define BITS5SYM 0x00
+#define BITS6SYM 0x10
+#define BITS7SYM 0x20
+#define BITS8SYM 0x30
+#define ONESTOP 0x07
+#define TWOSTOP 0x0f
+ /* 4-LSBS represent STOP bits/char
+ * in 1/8 bit-time intervals. Zero
+ * represents 1/8 stop bit interval.
+ * Fifteen represents 2 stop bits.
+ */
+ byte fifoctl;
+#define RSTTXFIFOS 0x80
+#define RSTRXFIFOS 0x40
+ /* 5-bit TimeoutCnt is in low bits of this register.
+ * This count represents the number of characters
+ * idle times before setting receive Irq when below threshold
+ */
+ uint32 baudword;
+ /* When divide SysClk/2/(1+baudword) we should get 32*bit-rate
+ */
+
+ byte txf_levl; /* Read-only fifo depth */
+ byte rxf_levl; /* Read-only fifo depth */
+ byte fifocfg; /* Upper 4-bits are TxThresh, Lower are
+ * RxThreshold. Irq can be asserted
+ * when rx fifo> thresh, txfifo<thresh
+ */
+ byte prog_out; /* Set value of DTR (Bit0), RTS (Bit1)
+ * if these bits are also enabled to GPIO_o
+ */
+#define DTREN 0x01
+#define RTSEN 0x02
+
+ byte unused1;
+ byte DeltaIPEdgeNoSense; /* Low 4-bits, set corr bit to 1 to
+ * detect irq on rising AND falling
+ * edges for corresponding GPIO_i
+ * if enabled (edge insensitive)
+ */
+ byte DeltaIPConfig_Mask; /* Upper 4 bits: 1 for posedge sense
+ * 0 for negedge sense if
+ * not configured for edge
+ * insensitive (see above)
+ * Lower 4 bits: Mask to enable change
+ * detection IRQ for corresponding
+ * GPIO_i
+ */
+ byte DeltaIP_SyncIP; /* Upper 4 bits show which bits
+ * have changed (may set IRQ).
+ * read automatically clears bit
+ * Lower 4 bits are actual status
+ */
+
+ uint16 intMask; /* Same Bit defs for Mask and status */
+ uint16 intStatus;
+#define DELTAIP 0x0001
+#define TXUNDERR 0x0002
+#define TXOVFERR 0x0004
+#define TXFIFOTHOLD 0x0008
+#define TXREADLATCH 0x0010
+#define TXFIFOEMT 0x0020
+#define RXUNDERR 0x0040
+#define RXOVFERR 0x0080
+#define RXTIMEOUT 0x0100
+#define RXFIFOFULL 0x0200
+#define RXFIFOTHOLD 0x0400
+#define RXFIFONE 0x0800
+#define RXFRAMERR 0x1000
+#define RXPARERR 0x2000
+#define RXBRK 0x4000
+
+ uint16 unused2;
+ uint16 Data; /* Write to TX, Read from RX */
+ /* bits 11:8 are BRK,PAR,FRM errors */
+
+ uint32 unused3;
+ uint32 unused4;
+} Uart;
+
+#define UART ((volatile Uart * const) UART_BASE)
+
+typedef struct GpioControl {
+ uint32 unused0;
+ uint32 GPIODir; /* bits 7:0 */
+ uint32 unused1;
+ uint32 GPIOio; /* bits 7:0 */
+ uint32 LEDCtrl;
+#define LED3_STROBE 0x08000000
+#define LED2_STROBE 0x04000000
+#define LED1_STROBE 0x02000000
+#define LED0_STROBE 0x01000000
+#define LED_TEST 0x00010000
+#define LED3_DISABLE_LINK_ACT 0x00008000
+#define LED2_DISABLE_LINK_ACT 0x00004000
+#define LED1_DISABLE_LINK_ACT 0x00002000
+#define LED0_DISABLE_LINK_ACT 0x00001000
+#define LED_INTERVAL_SET_MASK 0x00000f00
+#define LED_INTERVAL_SET_320MS 0x00000500
+#define LED_INTERVAL_SET_160MS 0x00000400
+#define LED_INTERVAL_SET_80MS 0x00000300
+#define LED_INTERVAL_SET_40MS 0x00000200
+#define LED_INTERVAL_SET_20MS 0x00000100
+#define LED3_ON 0x00000080
+#define LED2_ON 0x00000040
+#define LED1_ON 0x00000020
+#define LED0_ON 0x00000010
+#define LED3_ENABLE 0x00000008
+#define LED2_ENABLE 0x00000004
+#define LED1_ENABLE 0x00000002
+#define LED0_ENABLE 0x00000001
+ uint32 SpiSlaveCfg;
+#define SPI_SLAVE_RESET 0x00010000
+#define SPI_RESTRICT 0x00000400
+#define SPI_DELAY_DISABLE 0x00000200
+#define SPI_PROBE_MUX_SEL_MASK 0x000001e0
+#define SPI_SER_ADDR_CFG_MASK 0x0000000c
+#define SPI_MODE 0x00000001
+ uint32 vRegConfig;
+} GpioControl;
+
+#define GPIO ((volatile GpioControl * const) GPIO_BASE)
+
+/* Number to mask conversion macro used for GPIODir and GPIOio */
+#define GPIO_NUM_MAX_BITS_MASK 0x0f
+#define GPIO_NUM_TO_MASK(X) (1 << ((X) & GPIO_NUM_MAX_BITS_MASK))
+
+/*
+** Spi Controller
+*/
+
+typedef struct SpiControl {
+ uint16 spiCmd; /* (0x0): SPI command */
+#define SPI_CMD_START_IMMEDIATE 3
+
+#define SPI_CMD_COMMAND_SHIFT 0
+#define SPI_CMD_DEVICE_ID_SHIFT 4
+#define SPI_CMD_PREPEND_BYTE_CNT_SHIFT 8
+
+ byte spiIntStatus; /* (0x2): SPI interrupt status */
+ byte spiMaskIntStatus; /* (0x3): SPI masked interrupt status */
+
+ byte spiIntMask; /* (0x4): SPI interrupt mask */
+#define SPI_INTR_CMD_DONE 0x01
+#define SPI_INTR_CLEAR_ALL 0x1f
+
+ byte spiStatus; /* (0x5): SPI status */
+
+ byte spiClkCfg; /* (0x6): SPI clock configuration */
+
+ byte spiFillByte; /* (0x7): SPI fill byte */
+
+ byte unused0;
+ byte spiMsgTail; /* (0x9): msgtail */
+ byte unused1;
+ byte spiRxTail; /* (0xB): rxtail */
+
+ uint32 unused2[13]; /* (0x0c - 0x3c) reserved */
+
+ byte spiMsgCtl; /* (0x40) control byte */
+#define HALF_DUPLEX_W 1
+#define HALF_DUPLEX_R 2
+#define SPI_MSG_TYPE_SHIFT 6
+#define SPI_BYTE_CNT_SHIFT 0
+ byte spiMsgData[63]; /* (0x41 - 0x7f) msg data */
+ byte spiRxDataFifo[64]; /* (0x80 - 0xbf) rx data */
+ byte unused3[64]; /* (0xc0 - 0xff) reserved */
+} SpiControl;
+
+#define SPI ((volatile SpiControl * const) SPI_BASE)
+
+/*
+** External Bus Interface
+*/
+typedef struct EbiChipSelect {
+ uint32 base; /* base address in upper 24 bits */
+#define EBI_SIZE_8K 0
+#define EBI_SIZE_16K 1
+#define EBI_SIZE_32K 2
+#define EBI_SIZE_64K 3
+#define EBI_SIZE_128K 4
+#define EBI_SIZE_256K 5
+#define EBI_SIZE_512K 6
+#define EBI_SIZE_1M 7
+#define EBI_SIZE_2M 8
+#define EBI_SIZE_4M 9
+#define EBI_SIZE_8M 10
+#define EBI_SIZE_16M 11
+#define EBI_SIZE_32M 12
+#define EBI_SIZE_64M 13
+#define EBI_SIZE_128M 14
+#define EBI_SIZE_256M 15
+ uint32 config;
+#define EBI_ENABLE 0x00000001 /* .. enable this range */
+#define EBI_WAIT_STATES 0x0000000e /* .. mask for wait states */
+#define EBI_WTST_SHIFT 1 /* .. for shifting wait states */
+#define EBI_WORD_WIDE 0x00000010 /* .. 16-bit peripheral, else 8 */
+#define EBI_WREN 0x00000020 /* enable posted writes */
+#define EBI_POLARITY 0x00000040 /* .. set to invert something,
+ ** don't know what yet */
+#define EBI_TS_TA_MODE 0x00000080 /* .. use TS/TA mode */
+#define EBI_TS_SEL 0x00000100 /* .. drive tsize, not bs_b */
+#define EBI_FIFO 0x00000200 /* .. use fifo */
+#define EBI_RE 0x00000400 /* .. Reverse Endian */
+} EbiChipSelect;
+
+typedef struct MpiRegisters {
+ EbiChipSelect cs[1]; /* size chip select configuration */
+} MpiRegisters;
+
+#define MPI ((volatile MpiRegisters * const) MPI_BASE)
+
+
+#endif
+
diff -urN linux-2.6.17/bcmdrivers/opensource/include/bcm963xx/6345_intr.h linux-2.6.17-brcm63xx/bcmdrivers/opensource/include/bcm963xx/6345_intr.h
--- linux-2.6.17/bcmdrivers/opensource/include/bcm963xx/6345_intr.h 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.17-brcm63xx/bcmdrivers/opensource/include/bcm963xx/6345_intr.h 2006-07-25 10:45:09.000000000 +0200
@@ -0,0 +1,72 @@
+/*
+<:copyright-gpl
+ Copyright 2002 Broadcom Corp. All Rights Reserved.
+
+ This program is free software; you can distribute it and/or modify it
+ under the terms of the GNU General Public License (Version 2) as
+ published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+:>
+*/
+
+#ifndef __6345_INTR_H
+#define __6345_INTR_H
+
+
+/*=====================================================================*/
+/* BCM6345 External Interrupt Level Assignments */
+/*=====================================================================*/
+#define INTERRUPT_ID_EXTERNAL_0 3
+#define INTERRUPT_ID_EXTERNAL_1 4
+#define INTERRUPT_ID_EXTERNAL_2 5
+#define INTERRUPT_ID_EXTERNAL_3 6
+
+/*=====================================================================*/
+/* BCM6345 Timer Interrupt Level Assignments */
+/*=====================================================================*/
+#define MIPS_TIMER_INT 7
+
+/*=====================================================================*/
+/* Peripheral ISR Table Offset */
+/*=====================================================================*/
+#define INTERNAL_ISR_TABLE_OFFSET 8
+#define DMA_ISR_TABLE_OFFSET (INTERNAL_ISR_TABLE_OFFSET + 13)
+
+/*=====================================================================*/
+/* Logical Peripheral Interrupt IDs */
+/*=====================================================================*/
+
+/* Internal peripheral interrupt IDs */
+#define INTERRUPT_ID_TIMER (INTERNAL_ISR_TABLE_OFFSET + 0)
+#define INTERRUPT_ID_UART (INTERNAL_ISR_TABLE_OFFSET + 2)
+#define INTERRUPT_ID_ADSL (INTERNAL_ISR_TABLE_OFFSET + 3)
+#define INTERRUPT_ID_ATM (INTERNAL_ISR_TABLE_OFFSET + 4)
+#define INTERRUPT_ID_USB (INTERNAL_ISR_TABLE_OFFSET + 5)
+#define INTERRUPT_ID_EMAC (INTERNAL_ISR_TABLE_OFFSET + 8)
+#define INTERRUPT_ID_EPHY (INTERNAL_ISR_TABLE_OFFSET + 12)
+
+/* DMA channel interrupt IDs */
+#define INTERRUPT_ID_EMAC_RX_CHAN (DMA_ISR_TABLE_OFFSET + EMAC_RX_CHAN)
+#define INTERRUPT_ID_EMAC_TX_CHAN (DMA_ISR_TABLE_OFFSET + EMAC_TX_CHAN)
+#define INTERRUPT_ID_EBI_RX_CHAN (DMA_ISR_TABLE_OFFSET + EBI_RX_CHAN)
+#define INTERRUPT_ID_EBI_TX_CHAN (DMA_ISR_TABLE_OFFSET + EBI_TX_CHAN)
+#define INTERRUPT_ID_RESERVED_RX_CHAN (DMA_ISR_TABLE_OFFSET + RESERVED_RX_CHAN)
+#define INTERRUPT_ID_RESERVED_TX_CHAN (DMA_ISR_TABLE_OFFSET + RESERVED_TX_CHAN)
+#define INTERRUPT_ID_USB_BULK_RX_CHAN (DMA_ISR_TABLE_OFFSET + USB_BULK_RX_CHAN)
+#define INTERRUPT_ID_USB_BULK_TX_CHAN (DMA_ISR_TABLE_OFFSET + USB_BULK_TX_CHAN)
+#define INTERRUPT_ID_USB_CNTL_RX_CHAN (DMA_ISR_TABLE_OFFSET + USB_CNTL_RX_CHAN)
+#define INTERRUPT_ID_USB_CNTL_TX_CHAN (DMA_ISR_TABLE_OFFSET + USB_CNTL_TX_CHAN)
+#define INTERRUPT_ID_USB_ISO_RX_CHAN (DMA_ISR_TABLE_OFFSET + USB_ISO_RX_CHAN)
+#define INTERRUPT_ID_USB_ISO_TX_CHAN (DMA_ISR_TABLE_OFFSET + USB_ISO_TX_CHAN)
+
+
+#endif /* __BCM6345_H */
+
diff -urN linux-2.6.17/bcmdrivers/opensource/include/bcm963xx/6345_map_part.h linux-2.6.17-brcm63xx/bcmdrivers/opensource/include/bcm963xx/6345_map_part.h
--- linux-2.6.17/bcmdrivers/opensource/include/bcm963xx/6345_map_part.h 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.17-brcm63xx/bcmdrivers/opensource/include/bcm963xx/6345_map_part.h 2006-07-25 10:45:19.000000000 +0200
@@ -0,0 +1,163 @@
+/*
+<:copyright-gpl
+ Copyright 2002 Broadcom Corp. All Rights Reserved.
+
+ This program is free software; you can distribute it and/or modify it
+ under the terms of the GNU General Public License (Version 2) as
+ published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+:>
+*/
+
+#ifndef __BCM6345_MAP_H
+#define __BCM6345_MAP_H
+
+
+#include "bcmtypes.h"
+#include "6345_intr.h"
+
+typedef struct IntControl {
+ uint32 RevID;
+ uint16 testControl;
+ uint16 blkEnables;
+#define USB_CLK_EN 0x0100
+#define EMAC_CLK_EN 0x0080
+#define UART_CLK_EN 0x0008
+#define CPU_CLK_EN 0x0001
+
+ uint32 pll_control;
+#define SOFT_RESET 0x00000001
+
+ uint32 IrqMask;
+ uint32 IrqStatus;
+
+ uint32 ExtIrqCfg;
+#define EI_SENSE_SHFT 0
+#define EI_STATUS_SHFT 4
+#define EI_CLEAR_SHFT 8
+#define EI_MASK_SHFT 12
+#define EI_INSENS_SHFT 16
+#define EI_LEVEL_SHFT 20
+} IntControl;
+
+#define INTC_BASE 0xfffe0000
+#define PERF ((volatile IntControl * const) INTC_BASE)
+
+#define TIMR_BASE 0xfffe0200
+typedef struct Timer {
+ uint16 unused0;
+ byte TimerMask;
+#define TIMER0EN 0x01
+#define TIMER1EN 0x02
+#define TIMER2EN 0x04
+ byte TimerInts;
+#define TIMER0 0x01
+#define TIMER1 0x02
+#define TIMER2 0x04
+#define WATCHDOG 0x08
+ uint32 TimerCtl0;
+ uint32 TimerCtl1;
+ uint32 TimerCtl2;
+#define TIMERENABLE 0x80000000
+#define RSTCNTCLR 0x40000000
+ uint32 TimerCnt0;
+ uint32 TimerCnt1;
+ uint32 TimerCnt2;
+ uint32 WatchDogDefCount;
+
+ /* Write 0xff00 0x00ff to Start timer
+ * Write 0xee00 0x00ee to Stop and re-load default count
+ * Read from this register returns current watch dog count
+ */
+ uint32 WatchDogCtl;
+
+ /* Number of 40-MHz ticks for WD Reset pulse to last */
+ uint32 WDResetCount;
+} Timer;
+
+#define TIMER ((volatile Timer * const) TIMR_BASE)
+
+typedef struct UartChannel {
+ byte unused0;
+ byte control;
+#define BRGEN 0x80 /* Control register bit defs */
+#define TXEN 0x40
+#define RXEN 0x20
+#define TXPARITYEN 0x08
+#define TXPARITYEVEN 0x04
+#define RXPARITYEN 0x02
+#define RXPARITYEVEN 0x01
+ byte config;
+#define BITS5SYM 0x00
+#define BITS6SYM 0x10
+#define BITS7SYM 0x20
+#define BITS8SYM 0x30
+#define XMITBREAK 0x40
+#define ONESTOP 0x07
+#define TWOSTOP 0x0f
+
+ byte fifoctl;
+#define RSTTXFIFOS 0x80
+#define RSTRXFIFOS 0x40
+ uint32 baudword;
+
+ byte txf_levl;
+ byte rxf_levl;
+ byte fifocfg;
+ byte prog_out;
+
+ byte unused1;
+ byte DeltaIPEdgeNoSense;
+ byte DeltaIPConfig_Mask;
+ byte DeltaIP_SyncIP;
+ uint16 intMask;
+ uint16 intStatus;
+#define TXUNDERR 0x0002
+#define TXOVFERR 0x0004
+#define TXFIFOEMT 0x0020
+#define RXOVFERR 0x0080
+#define RXFIFONE 0x0800
+#define RXFRAMERR 0x1000
+#define RXPARERR 0x2000
+#define RXBRK 0x4000
+
+ uint16 unused2;
+ uint16 Data;
+ uint32 unused3;
+ uint32 unused4;
+} Uart;
+
+#define UART_BASE 0xfffe0300
+#define UART ((volatile Uart * const) UART_BASE)
+
+typedef struct GpioControl {
+ uint16 unused0;
+ byte unused1;
+ byte TBusSel;
+
+ uint16 unused2;
+ uint16 GPIODir;
+ byte unused3;
+ byte Leds;
+ uint16 GPIOio;
+
+ uint32 UartCtl;
+} GpioControl;
+
+#define GPIO_BASE 0xfffe0400
+#define GPIO ((volatile GpioControl * const) GPIO_BASE)
+
+#define GPIO_NUM_MAX_BITS_MASK 0x0f
+#define GPIO_NUM_TO_MASK(X) (1 << ((X) & GPIO_NUM_MAX_BITS_MASK))
+
+
+#endif
+
diff -urN linux-2.6.17/bcmdrivers/opensource/include/bcm963xx/6348_intr.h linux-2.6.17-brcm63xx/bcmdrivers/opensource/include/bcm963xx/6348_intr.h
--- linux-2.6.17/bcmdrivers/opensource/include/bcm963xx/6348_intr.h 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.17-brcm63xx/bcmdrivers/opensource/include/bcm963xx/6348_intr.h 2006-07-25 10:45:33.000000000 +0200
@@ -0,0 +1,74 @@
+/*
+<:copyright-gpl
+ Copyright 2003 Broadcom Corp. All Rights Reserved.
+
+ This program is free software; you can distribute it and/or modify it
+ under the terms of the GNU General Public License (Version 2) as
+ published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+:>
+*/
+
+#ifndef __6348_INTR_H
+#define __6348_INTR_H
+
+
+/*=====================================================================*/
+/* BCM6348 External Interrupt Level Assignments */
+/*=====================================================================*/
+#define INTERRUPT_ID_EXTERNAL_0 3
+#define INTERRUPT_ID_EXTERNAL_1 4
+#define INTERRUPT_ID_EXTERNAL_2 5
+#define INTERRUPT_ID_EXTERNAL_3 6
+
+/*=====================================================================*/
+/* BCM6348 Timer Interrupt Level Assignments */
+/*=====================================================================*/
+#define MIPS_TIMER_INT 7
+
+/*=====================================================================*/
+/* Peripheral ISR Table Offset */
+/*=====================================================================*/
+#define INTERNAL_ISR_TABLE_OFFSET 8
+
+/*=====================================================================*/
+/* Logical Peripheral Interrupt IDs */
+/*=====================================================================*/
+
+#define INTERRUPT_ID_TIMER (INTERNAL_ISR_TABLE_OFFSET + 0)
+#define INTERRUPT_ID_SPI (INTERNAL_ISR_TABLE_OFFSET + 1)
+#define INTERRUPT_ID_UART (INTERNAL_ISR_TABLE_OFFSET + 2)
+#define INTERRUPT_ID_ADSL (INTERNAL_ISR_TABLE_OFFSET + 4)
+#define INTERRUPT_ID_ATM (INTERNAL_ISR_TABLE_OFFSET + 5)
+#define INTERRUPT_ID_USBS (INTERNAL_ISR_TABLE_OFFSET + 6)
+#define INTERRUPT_ID_EMAC2 (INTERNAL_ISR_TABLE_OFFSET + 7)
+#define INTERRUPT_ID_EMAC1 (INTERNAL_ISR_TABLE_OFFSET + 8)
+#define INTERRUPT_ID_EPHY (INTERNAL_ISR_TABLE_OFFSET + 9)
+#define INTERRUPT_ID_M2M (INTERNAL_ISR_TABLE_OFFSET + 10)
+#define INTERRUPT_ID_ACLC (INTERNAL_ISR_TABLE_OFFSET + 11)
+#define INTERRUPT_ID_USBH (INTERNAL_ISR_TABLE_OFFSET + 12)
+#define INTERRUPT_ID_SDRAM (INTERNAL_ISR_TABLE_OFFSET + 13)
+#define INTERRUPT_ID_USB_CNTL_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 14)
+#define INTERRUPT_ID_USB_CNTL_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 15)
+#define INTERRUPT_ID_USB_BULK_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 16)
+#define INTERRUPT_ID_USB_BULK_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 17)
+#define INTERRUPT_ID_USB_ISO_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 18)
+#define INTERRUPT_ID_USB_ISO_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 19)
+#define INTERRUPT_ID_EMAC1_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 20)
+#define INTERRUPT_ID_EMAC1_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 21)
+#define INTERRUPT_ID_EMAC2_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 22)
+#define INTERRUPT_ID_EMAC2_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 23)
+#define INTERRUPT_ID_MPI (INTERNAL_ISR_TABLE_OFFSET + 24)
+#define INTERRUPT_ID_DG (INTERNAL_ISR_TABLE_OFFSET + 25)
+
+
+#endif /* __BCM6348_H */
+
diff -urN linux-2.6.17/bcmdrivers/opensource/include/bcm963xx/6348_map_part.h linux-2.6.17-brcm63xx/bcmdrivers/opensource/include/bcm963xx/6348_map_part.h
--- linux-2.6.17/bcmdrivers/opensource/include/bcm963xx/6348_map_part.h 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.17-brcm63xx/bcmdrivers/opensource/include/bcm963xx/6348_map_part.h 2006-07-25 10:44:21.000000000 +0200
@@ -0,0 +1,500 @@
+/*
+<:copyright-gpl
+ Copyright 2002 Broadcom Corp. All Rights Reserved.
+
+ This program is free software; you can distribute it and/or modify it
+ under the terms of the GNU General Public License (Version 2) as
+ published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+:>
+*/
+
+#ifndef __BCM6348_MAP_H
+#define __BCM6348_MAP_H
+
+#include "bcmtypes.h"
+
+#define PERF_BASE 0xfffe0000
+#define TIMR_BASE 0xfffe0200
+#define UART_BASE 0xfffe0300
+#define GPIO_BASE 0xfffe0400
+#define MPI_BASE 0xfffe2000 /* MPI control registers */
+#define USB_HOST_BASE 0xfffe1b00 /* USB host registers */
+#define USB_HOST_NON_OHCI 0xfffe1c00 /* USB host non-OHCI registers */
+
+typedef struct PerfControl {
+ uint32 RevID;
+ uint16 testControl;
+ uint16 blkEnables;
+#define EMAC_CLK_EN 0x0010
+#define SAR_CLK_EN 0x0020
+#define USBS_CLK_EN 0x0040
+#define USBH_CLK_EN 0x0100
+
+ uint32 pll_control;
+#define SOFT_RESET 0x00000001
+
+ uint32 IrqMask;
+ uint32 IrqStatus;
+
+ uint32 ExtIrqCfg;
+#define EI_SENSE_SHFT 0
+#define EI_STATUS_SHFT 5
+#define EI_CLEAR_SHFT 10
+#define EI_MASK_SHFT 15
+#define EI_INSENS_SHFT 20
+#define EI_LEVEL_SHFT 25
+
+ uint32 unused[4]; /* (18) */
+ uint32 BlockSoftReset; /* (28) */
+#define BSR_SPI 0x00000001
+#define BSR_EMAC 0x00000004
+#define BSR_USBH 0x00000008
+#define BSR_USBS 0x00000010
+#define BSR_ADSL 0x00000020
+#define BSR_DMAMEM 0x00000040
+#define BSR_SAR 0x00000080
+#define BSR_ACLC 0x00000100
+#define BSR_ADSL_MIPS_PLL 0x00000400
+#define BSR_ALL_BLOCKS \
+ (BSR_SPI | BSR_EMAC | BSR_USBH | BSR_USBS | BSR_ADSL | BSR_DMAMEM | \
+ BSR_SAR | BSR_ACLC | BSR_ADSL_MIPS_PLL)
+ uint32 unused2[2]; /* (2c) */
+ uint32 PllStrap; /* (34) */
+#define PLL_N1_SHFT 20
+#define PLL_N1_MASK (7<<PLL_N1_SHFT)
+#define PLL_N2_SHFT 15
+#define PLL_N2_MASK (0x1f<<PLL_N2_SHFT)
+#define PLL_M1_REF_SHFT 12
+#define PLL_M1_REF_MASK (7<<PLL_M1_REF_SHFT)
+#define PLL_M2_REF_SHFT 9
+#define PLL_M2_REF_MASK (7<<PLL_M2_REF_SHFT)
+#define PLL_M1_CPU_SHFT 6
+#define PLL_M1_CPU_MASK (7<<PLL_M1_CPU_SHFT)
+#define PLL_M1_BUS_SHFT 3
+#define PLL_M1_BUS_MASK (7<<PLL_M1_BUS_SHFT)
+#define PLL_M2_BUS_SHFT 0
+#define PLL_M2_BUS_MASK (7<<PLL_M2_BUS_SHFT)
+} PerfControl;
+
+#define PERF ((volatile PerfControl * const) PERF_BASE)
+
+typedef struct Timer {
+ uint16 unused0;
+ byte TimerMask;
+#define TIMER0EN 0x01
+#define TIMER1EN 0x02
+#define TIMER2EN 0x04
+ byte TimerInts;
+#define TIMER0 0x01
+#define TIMER1 0x02
+#define TIMER2 0x04
+#define WATCHDOG 0x08
+ uint32 TimerCtl0;
+ uint32 TimerCtl1;
+ uint32 TimerCtl2;
+#define TIMERENABLE 0x80000000
+#define RSTCNTCLR 0x40000000
+ uint32 TimerCnt0;
+ uint32 TimerCnt1;
+ uint32 TimerCnt2;
+ uint32 WatchDogDefCount;
+
+ /* Write 0xff00 0x00ff to Start timer
+ * Write 0xee00 0x00ee to Stop and re-load default count
+ * Read from this register returns current watch dog count
+ */
+ uint32 WatchDogCtl;
+
+ /* Number of 40-MHz ticks for WD Reset pulse to last */
+ uint32 WDResetCount;
+} Timer;
+
+#define TIMER ((volatile Timer * const) TIMR_BASE)
+
+typedef struct UartChannel {
+ byte unused0;
+ byte control;
+#define BRGEN 0x80 /* Control register bit defs */
+#define TXEN 0x40
+#define RXEN 0x20
+#define LOOPBK 0x10
+#define TXPARITYEN 0x08
+#define TXPARITYEVEN 0x04
+#define RXPARITYEN 0x02
+#define RXPARITYEVEN 0x01
+
+ byte config;
+#define XMITBREAK 0x40
+#define BITS5SYM 0x00
+#define BITS6SYM 0x10
+#define BITS7SYM 0x20
+#define BITS8SYM 0x30
+#define ONESTOP 0x07
+#define TWOSTOP 0x0f
+ /* 4-LSBS represent STOP bits/char
+ * in 1/8 bit-time intervals. Zero
+ * represents 1/8 stop bit interval.
+ * Fifteen represents 2 stop bits.
+ */
+ byte fifoctl;
+#define RSTTXFIFOS 0x80
+#define RSTRXFIFOS 0x40
+ /* 5-bit TimeoutCnt is in low bits of this register.
+ * This count represents the number of characters
+ * idle times before setting receive Irq when below threshold
+ */
+ uint32 baudword;
+ /* When divide SysClk/2/(1+baudword) we should get 32*bit-rate
+ */
+
+ byte txf_levl; /* Read-only fifo depth */
+ byte rxf_levl; /* Read-only fifo depth */
+ byte fifocfg; /* Upper 4-bits are TxThresh, Lower are
+ * RxThreshold. Irq can be asserted
+ * when rx fifo> thresh, txfifo<thresh
+ */
+ byte prog_out; /* Set value of DTR (Bit0), RTS (Bit1)
+ * if these bits are also enabled to GPIO_o
+ */
+#define DTREN 0x01
+#define RTSEN 0x02
+
+ byte unused1;
+ byte DeltaIPEdgeNoSense; /* Low 4-bits, set corr bit to 1 to
+ * detect irq on rising AND falling
+ * edges for corresponding GPIO_i
+ * if enabled (edge insensitive)
+ */
+ byte DeltaIPConfig_Mask; /* Upper 4 bits: 1 for posedge sense
+ * 0 for negedge sense if
+ * not configured for edge
+ * insensitive (see above)
+ * Lower 4 bits: Mask to enable change
+ * detection IRQ for corresponding
+ * GPIO_i
+ */
+ byte DeltaIP_SyncIP; /* Upper 4 bits show which bits
+ * have changed (may set IRQ).
+ * read automatically clears bit
+ * Lower 4 bits are actual status
+ */
+
+ uint16 intMask; /* Same Bit defs for Mask and status */
+ uint16 intStatus;
+#define DELTAIP 0x0001
+#define TXUNDERR 0x0002
+#define TXOVFERR 0x0004
+#define TXFIFOTHOLD 0x0008
+#define TXREADLATCH 0x0010
+#define TXFIFOEMT 0x0020
+#define RXUNDERR 0x0040
+#define RXOVFERR 0x0080
+#define RXTIMEOUT 0x0100
+#define RXFIFOFULL 0x0200
+#define RXFIFOTHOLD 0x0400
+#define RXFIFONE 0x0800
+#define RXFRAMERR 0x1000
+#define RXPARERR 0x2000
+#define RXBRK 0x4000
+
+ uint16 unused2;
+ uint16 Data; /* Write to TX, Read from RX */
+ /* bits 11:8 are BRK,PAR,FRM errors */
+
+ uint32 unused3;
+ uint32 unused4;
+} Uart;
+
+#define UART ((volatile Uart * const) UART_BASE)
+
+typedef struct GpioControl {
+ uint32 GPIODir_high; /* bits 36:32 */
+ uint32 GPIODir; /* bits 31:00 */
+ uint32 GPIOio_high; /* bits 36:32 */
+ uint32 GPIOio; /* bits 31:00 */
+ uint32 LEDCtrl;
+#define LED3_STROBE 0x08000000
+#define LED2_STROBE 0x04000000
+#define LED1_STROBE 0x02000000
+#define LED0_STROBE 0x01000000
+#define LED_TEST 0x00010000
+#define LED3_DISABLE_LINK_ACT 0x00008000
+#define LED2_DISABLE_LINK_ACT 0x00004000
+#define LED1_DISABLE_LINK_ACT 0x00002000
+#define LED0_DISABLE_LINK_ACT 0x00001000
+#define LED_INTERVAL_SET_MASK 0x00000f00
+#define LED_INTERVAL_SET_320MS 0x00000500
+#define LED_INTERVAL_SET_160MS 0x00000400
+#define LED_INTERVAL_SET_80MS 0x00000300
+#define LED_INTERVAL_SET_40MS 0x00000200
+#define LED_INTERVAL_SET_20MS 0x00000100
+#define LED3_ON 0x00000080
+#define LED2_ON 0x00000040
+#define LED1_ON 0x00000020
+#define LED0_ON 0x00000010
+#define LED3_ENABLE 0x00000008
+#define LED2_ENABLE 0x00000004
+#define LED1_ENABLE 0x00000002
+#define LED0_ENABLE 0x00000001
+ uint32 SpiSlaveCfg;
+#define SPI_SLAVE_RESET 0x00010000
+#define SPI_RESTRICT 0x00000400
+#define SPI_DELAY_DISABLE 0x00000200
+#define SPI_PROBE_MUX_SEL_MASK 0x000001e0
+#define SPI_SER_ADDR_CFG_MASK 0x0000000c
+#define SPI_MODE 0x00000001
+ uint32 GPIOMode;
+#define GROUP4_DIAG 0x00090000
+#define GROUP4_UTOPIA 0x00080000
+#define GROUP4_LEGACY_LED 0x00030000
+#define GROUP4_MII_SNOOP 0x00020000
+#define GROUP4_EXT_EPHY 0x00010000
+#define GROUP3_DIAG 0x00009000
+#define GROUP3_UTOPIA 0x00008000
+#define GROUP3_EXT_MII 0x00007000
+#define GROUP2_DIAG 0x00000900
+#define GROUP2_PCI 0x00000500
+#define GROUP1_DIAG 0x00000090
+#define GROUP1_UTOPIA 0x00000080
+#define GROUP1_SPI_UART 0x00000060
+#define GROUP1_SPI_MASTER 0x00000060
+#define GROUP1_MII_PCCARD 0x00000040
+#define GROUP1_MII_SNOOP 0x00000020
+#define GROUP1_EXT_EPHY 0x00000010
+#define GROUP0_DIAG 0x00000009
+#define GROUP0_EXT_MII 0x00000007
+
+} GpioControl;
+
+#define GPIO ((volatile GpioControl * const) GPIO_BASE)
+
+/* Number to mask conversion macro used for GPIODir and GPIOio */
+#define GPIO_NUM_TOTAL_BITS_MASK 0x3f
+#define GPIO_NUM_MAX_BITS_MASK 0x1f
+#define GPIO_NUM_TO_MASK(X) ( (((X) & GPIO_NUM_TOTAL_BITS_MASK) < 32) ? (1 << ((X) & GPIO_NUM_MAX_BITS_MASK)) : (0) )
+
+/* Number to mask conversion macro used for GPIODir_high and GPIOio_high */
+#define GPIO_NUM_MAX_BITS_MASK_HIGH 0x07
+#define GPIO_NUM_TO_MASK_HIGH(X) ( (((X) & GPIO_NUM_TOTAL_BITS_MASK) >= 32) ? (1 << ((X-32) & GPIO_NUM_MAX_BITS_MASK_HIGH)) : (0) )
+
+
+/*
+** External Bus Interface
+*/
+typedef struct EbiChipSelect {
+ uint32 base; /* base address in upper 24 bits */
+#define EBI_SIZE_8K 0
+#define EBI_SIZE_16K 1
+#define EBI_SIZE_32K 2
+#define EBI_SIZE_64K 3
+#define EBI_SIZE_128K 4
+#define EBI_SIZE_256K 5
+#define EBI_SIZE_512K 6
+#define EBI_SIZE_1M 7
+#define EBI_SIZE_2M 8
+#define EBI_SIZE_4M 9
+#define EBI_SIZE_8M 10
+#define EBI_SIZE_16M 11
+#define EBI_SIZE_32M 12
+#define EBI_SIZE_64M 13
+#define EBI_SIZE_128M 14
+#define EBI_SIZE_256M 15
+ uint32 config;
+#define EBI_ENABLE 0x00000001 /* .. enable this range */
+#define EBI_WAIT_STATES 0x0000000e /* .. mask for wait states */
+#define EBI_WTST_SHIFT 1 /* .. for shifting wait states */
+#define EBI_WORD_WIDE 0x00000010 /* .. 16-bit peripheral, else 8 */
+#define EBI_WREN 0x00000020 /* enable posted writes */
+#define EBI_POLARITY 0x00000040 /* .. set to invert something,
+ ** don't know what yet */
+#define EBI_TS_TA_MODE 0x00000080 /* .. use TS/TA mode */
+#define EBI_TS_SEL 0x00000100 /* .. drive tsize, not bs_b */
+#define EBI_FIFO 0x00000200 /* .. use fifo */
+#define EBI_RE 0x00000400 /* .. Reverse Endian */
+} EbiChipSelect;
+
+typedef struct MpiRegisters {
+ EbiChipSelect cs[7]; /* size chip select configuration */
+#define EBI_CS0_BASE 0
+#define EBI_CS1_BASE 1
+#define EBI_CS2_BASE 2
+#define EBI_CS3_BASE 3
+#define PCMCIA_COMMON_BASE 4
+#define PCMCIA_ATTRIBUTE_BASE 5
+#define PCMCIA_IO_BASE 6
+ uint32 unused0[2]; /* reserved */
+ uint32 ebi_control; /* ebi control */
+ uint32 unused1[4]; /* reserved */
+#define EBI_ACCESS_TIMEOUT 0x000007FF
+ uint32 pcmcia_cntl1; /* pcmcia control 1 */
+#define PCCARD_CARD_RESET 0x00040000
+#define CARDBUS_ENABLE 0x00008000
+#define PCMCIA_ENABLE 0x00004000
+#define PCMCIA_GPIO_ENABLE 0x00002000
+#define CARDBUS_IDSEL 0x00001F00
+#define VS2_OEN 0x00000080
+#define VS1_OEN 0x00000040
+#define VS2_OUT 0x00000020
+#define VS1_OUT 0x00000010
+#define VS2_IN 0x00000008
+#define VS1_IN 0x00000004
+#define CD2_IN 0x00000002
+#define CD1_IN 0x00000001
+#define VS_MASK 0x0000000C
+#define CD_MASK 0x00000003
+ uint32 unused2; /* reserved */
+ uint32 pcmcia_cntl2; /* pcmcia control 2 */
+#define PCMCIA_BYTESWAP_DIS 0x00000002
+#define PCMCIA_HALFWORD_EN 0x00000001
+#define RW_ACTIVE_CNT_BIT 2
+#define INACTIVE_CNT_BIT 8
+#define CE_SETUP_CNT_BIT 16
+#define CE_HOLD_CNT_BIT 24
+ uint32 unused3[40]; /* reserved */
+
+ uint32 sp0range; /* PCI to internal system bus address space */
+ uint32 sp0remap;
+ uint32 sp0cfg;
+ uint32 sp1range;
+ uint32 sp1remap;
+ uint32 sp1cfg;
+
+ uint32 EndianCfg;
+
+ uint32 l2pcfgctl; /* internal system bus to PCI IO/Cfg control */
+#define DIR_CFG_SEL 0x80000000 /* change from PCI I/O access to PCI config access */
+#define DIR_CFG_USEREG 0x40000000 /* use this register info for PCI configuration access */
+#define DEVICE_NUMBER 0x00007C00 /* device number for the PCI configuration access */
+#define FUNC_NUMBER 0x00000300 /* function number for the PCI configuration access */
+#define REG_NUMBER 0x000000FC /* register number for the PCI configuration access */
+#define CONFIG_TYPE 0x00000003 /* configuration type for the PCI configuration access */
+
+ uint32 l2pmrange1; /* internal system bus to PCI memory space */
+#define PCI_SIZE_64K 0xFFFF0000
+#define PCI_SIZE_128K 0xFFFE0000
+#define PCI_SIZE_256K 0xFFFC0000
+#define PCI_SIZE_512K 0xFFF80000
+#define PCI_SIZE_1M 0xFFF00000
+#define PCI_SIZE_2M 0xFFE00000
+#define PCI_SIZE_4M 0xFFC00000
+#define PCI_SIZE_8M 0xFF800000
+#define PCI_SIZE_16M 0xFF000000
+#define PCI_SIZE_32M 0xFE000000
+ uint32 l2pmbase1; /* kseg0 or kseg1 address & 0x1FFFFFFF */
+ uint32 l2pmremap1;
+#define CARDBUS_MEM 0x00000004
+#define MEM_WINDOW_EN 0x00000001
+ uint32 l2pmrange2;
+ uint32 l2pmbase2;
+ uint32 l2pmremap2;
+ uint32 l2piorange; /* internal system bus to PCI I/O space */
+ uint32 l2piobase;
+ uint32 l2pioremap;
+
+ uint32 pcimodesel;
+#define PCI2_INT_BUS_RD_PREFECH 0x000000F0
+#define PCI_BAR2_NOSWAP 0x00000002 /* BAR at offset 0x20 */
+#define PCI_BAR1_NOSWAP 0x00000001 /* BAR at affset 0x1c */
+
+ uint32 pciintstat; /* PCI interrupt mask/status */
+#define MAILBOX1_SENT 0x08
+#define MAILBOX0_SENT 0x04
+#define MAILBOX1_MSG_RCV 0x02
+#define MAILBOX0_MSG_RCV 0x01
+ uint32 locbuscntrl; /* internal system bus control */
+#define DIR_U2P_NOSWAP 0x00000002
+#define EN_PCI_GPIO 0x00000001
+ uint32 locintstat; /* internal system bus interrupt mask/status */
+#define CSERR 0x0200
+#define SERR 0x0100
+#define EXT_PCI_INT 0x0080
+#define DIR_FAILED 0x0040
+#define DIR_COMPLETE 0x0020
+#define PCI_CFG 0x0010
+ uint32 unused5[7];
+
+ uint32 mailbox0;
+ uint32 mailbox1;
+
+ uint32 pcicfgcntrl; /* internal system bus PCI configuration control */
+#define PCI_CFG_REG_WRITE_EN 0x00000080
+#define PCI_CFG_ADDR 0x0000003C
+ uint32 pcicfgdata; /* internal system bus PCI configuration data */
+
+ uint32 locch2ctl; /* PCI to interrnal system bus DMA (downstream) local control */
+#define MPI_DMA_HALT 0x00000008 /* idle after finish current memory burst */
+#define MPI_DMA_PKT_HALT 0x00000004 /* idle after an EOP flag is detected */
+#define MPI_DMA_STALL 0x00000002 /* idle after an EOP flag is detected */
+#define MPI_DMA_ENABLE 0x00000001 /* set to enable channel */
+ uint32 locch2intStat;
+#define MPI_DMA_NO_DESC 0x00000004 /* no valid descriptors */
+#define MPI_DMA_DONE 0x00000002 /* packet xfer complete */
+#define MPI_DMA_BUFF_DONE 0x00000001 /* buffer done */
+ uint32 locch2intMask;
+ uint32 unused6;
+ uint32 locch2descaddr;
+ uint32 locch2status1;
+#define LOCAL_DESC_STATE 0xE0000000
+#define PCI_DESC_STATE 0x1C000000
+#define BYTE_DONE 0x03FFC000
+#define RING_ADDR 0x00003FFF
+ uint32 locch2status2;
+#define BUFPTR_OFFSET 0x1FFF0000
+#define PCI_MASTER_STATE 0x000000C0
+#define LOC_MASTER_STATE 0x00000038
+#define CONTROL_STATE 0x00000007
+ uint32 unused7;
+
+ uint32 locch1Ctl; /*internal system bus to PCI DMA (upstream) local control */
+#define DMA_U2P_LE 0x00000200 /* local bus is little endian */
+#define DMA_U2P_NOSWAP 0x00000100 /* lccal bus is little endian but no data swapped */
+ uint32 locch1intstat;
+ uint32 locch1intmask;
+ uint32 unused8;
+ uint32 locch1descaddr;
+ uint32 locch1status1;
+ uint32 locch1status2;
+ uint32 unused9;
+
+ uint32 pcich1ctl; /* internal system bus to PCI DMA PCI control */
+ uint32 pcich1intstat;
+ uint32 pcich1intmask;
+ uint32 pcich1descaddr;
+ uint32 pcich1status1;
+ uint32 pcich1status2;
+
+ uint32 pcich2Ctl; /* PCI to internal system bus DMA PCI control */
+ uint32 pcich2intstat;
+ uint32 pcich2intmask;
+ uint32 pcich2descaddr;
+ uint32 pcich2status1;
+ uint32 pcich2status2;
+
+ uint32 perm_id; /* permanent device and vendor id */
+ uint32 perm_rev; /* permanent revision id */
+} MpiRegisters;
+
+#define MPI ((volatile MpiRegisters * const) MPI_BASE)
+
+/* PCI configuration address space start offset 0x40 */
+#define BRCM_PCI_CONFIG_TIMER 0x40
+#define BRCM_PCI_CONFIG_TIMER_RETRY_MASK 0x0000FF00
+#define BRCM_PCI_CONFIG_TIMER_TRDY_MASK 0x000000FF
+
+/* USB host non-Open HCI register, USB_HOST_NON_OHCI, bit definitions. */
+#define NON_OHCI_ENABLE_PORT1 0x00000001 /* Use USB port 1 for host, not dev */
+#define NON_OHCI_BYTE_SWAP 0x00000008 /* Swap USB host registers */
+
+#define USBH_NON_OHCI ((volatile unsigned long * const) USB_HOST_NON_OHCI)
+
+#endif
+
diff -urN linux-2.6.17/bcmdrivers/opensource/include/bcm963xx/bcm_intr.h linux-2.6.17-brcm63xx/bcmdrivers/opensource/include/bcm963xx/bcm_intr.h
--- linux-2.6.17/bcmdrivers/opensource/include/bcm963xx/bcm_intr.h 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.17-brcm63xx/bcmdrivers/opensource/include/bcm963xx/bcm_intr.h 2006-07-25 10:43:50.000000000 +0200
@@ -0,0 +1,59 @@
+/*
+<:copyright-gpl
+ Copyright 2003 Broadcom Corp. All Rights Reserved.
+
+ This program is free software; you can distribute it and/or modify it
+ under the terms of the GNU General Public License (Version 2) as
+ published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+:>
+*/
+
+#ifndef __BCM_INTR_H
+#define __BCM_INTR_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(CONFIG_BCM96338)
+#include <6338_intr.h>
+#endif
+#if defined(CONFIG_BCM96345)
+#include <6345_intr.h>
+#endif
+#if defined(CONFIG_BCM96348)
+#include <6348_intr.h>
+#endif
+
+/* defines */
+struct pt_regs;
+typedef int (*FN_HANDLER) (int, void *, struct pt_regs *);
+
+/* prototypes */
+extern void enable_brcm_irq(unsigned int irq);
+extern void disable_brcm_irq(unsigned int irq);
+extern int request_external_irq(unsigned int irq,
+ FN_HANDLER handler, unsigned long irqflags,
+ const char * devname, void *dev_id);
+extern unsigned int BcmHalMapInterrupt(FN_HANDLER isr, unsigned int param,
+ unsigned int interruptId);
+extern void dump_intr_regs(void);
+
+/* compatibility definitions */
+#define BcmHalInterruptEnable(irq) enable_brcm_irq( irq )
+#define BcmHalInterruptDisable(irq) disable_brcm_irq( irq )
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif
diff -urN linux-2.6.17/bcmdrivers/opensource/include/bcm963xx/bcm_map_part.h linux-2.6.17-brcm63xx/bcmdrivers/opensource/include/bcm963xx/bcm_map_part.h
--- linux-2.6.17/bcmdrivers/opensource/include/bcm963xx/bcm_map_part.h 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.17-brcm63xx/bcmdrivers/opensource/include/bcm963xx/bcm_map_part.h 2006-07-25 10:43:50.000000000 +0200
@@ -0,0 +1,34 @@
+/*
+<:copyright-gpl
+ Copyright 2004 Broadcom Corp. All Rights Reserved.
+
+ This program is free software; you can distribute it and/or modify it
+ under the terms of the GNU General Public License (Version 2) as
+ published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+:>
+*/
+
+#ifndef __BCM_MAP_PART_H
+#define __BCM_MAP_PART_H
+
+#if defined(CONFIG_BCM96338)
+#include <6338_map_part.h>
+#endif
+#if defined(CONFIG_BCM96345)
+#include <6345_map_part.h>
+#endif
+#if defined(CONFIG_BCM96348)
+#include <6348_map_part.h>
+#endif
+
+#endif
+
diff -urN linux-2.6.17/bcmdrivers/opensource/include/bcm963xx/bcmpci.h linux-2.6.17-brcm63xx/bcmdrivers/opensource/include/bcm963xx/bcmpci.h
--- linux-2.6.17/bcmdrivers/opensource/include/bcm963xx/bcmpci.h 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.17-brcm63xx/bcmdrivers/opensource/include/bcm963xx/bcmpci.h 2006-07-25 10:43:50.000000000 +0200
@@ -0,0 +1,87 @@
+/*
+<:copyright-gpl
+ Copyright 2004 Broadcom Corp. All Rights Reserved.
+
+ This program is free software; you can distribute it and/or modify it
+ under the terms of the GNU General Public License (Version 2) as
+ published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+:>
+*/
+
+//
+// bcmpci.h - bcm96348 PCI, Cardbus, and PCMCIA definition
+//
+#ifndef BCMPCI_H
+#define BCMPCI_H
+
+/* Memory window in internal system bus address space */
+#define BCM_PCI_MEM_BASE 0x08000000
+/* IO window in internal system bus address space */
+#define BCM_PCI_IO_BASE 0x0C000000
+
+#define BCM_PCI_ADDR_MASK 0x1fffffff
+
+/* Memory window size (range) */
+#define BCM_PCI_MEM_SIZE_16MB 0x01000000
+/* IO window size (range) */
+#define BCM_PCI_IO_SIZE_64KB 0x00010000
+
+/* PCI Configuration and I/O space acesss */
+#define BCM_PCI_CFG(d, f, o) ( (d << 11) | (f << 8) | (o/4 << 2) )
+
+/* fake USB PCI slot */
+#define USB_HOST_SLOT 9
+#define USB_BAR0_MEM_SIZE 0x0800
+
+#define BCM_HOST_MEM_SPACE1 0x10000000
+#define BCM_HOST_MEM_SPACE2 0x00000000
+
+/*
+ * EBI bus clock is 33MHz and share with PCI bus
+ * each clock cycle is 30ns.
+ */
+/* attribute memory access wait cnt for 4306 */
+#define PCMCIA_ATTR_CE_HOLD 3 // data hold time 70ns
+#define PCMCIA_ATTR_CE_SETUP 3 // data setup time 50ns
+#define PCMCIA_ATTR_INACTIVE 6 // time between read/write cycles 180ns. For the total cycle time 600ns (cnt1+cnt2+cnt3+cnt4)
+#define PCMCIA_ATTR_ACTIVE 10 // OE/WE pulse width 300ns
+
+/* common memory access wait cnt for 4306 */
+#define PCMCIA_MEM_CE_HOLD 1 // data hold time 30ns
+#define PCMCIA_MEM_CE_SETUP 1 // data setup time 30ns
+#define PCMCIA_MEM_INACTIVE 2 // time between read/write cycles 40ns. For the total cycle time 250ns (cnt1+cnt2+cnt3+cnt4)
+#define PCMCIA_MEM_ACTIVE 5 // OE/WE pulse width 150ns
+
+#define PCCARD_VCC_MASK 0x00070000 // Mask Reset also
+#define PCCARD_VCC_33V 0x00010000
+#define PCCARD_VCC_50V 0x00020000
+
+typedef enum {
+ MPI_CARDTYPE_NONE, // No Card in slot
+ MPI_CARDTYPE_PCMCIA, // 16-bit PCMCIA card in slot
+ MPI_CARDTYPE_CARDBUS, // 32-bit CardBus card in slot
+} CardType;
+
+#define CARDBUS_SLOT 0 // Slot 0 is default for CardBus
+
+#define pcmciaAttrOffset 0x00200000
+#define pcmciaMemOffset 0x00000000
+// Needs to be right above PCI I/O space. Give 0x8000 (32K) to PCMCIA.
+#define pcmciaIoOffset (BCM_PCI_IO_BASE + 0x80000)
+// Base Address is that mapped into the MPI ChipSelect registers.
+// UBUS bridge MemoryWindow 0 outputs a 0x00 for the base.
+#define pcmciaBase 0xbf000000
+#define pcmciaAttr (pcmciaAttrOffset | pcmciaBase)
+#define pcmciaMem (pcmciaMemOffset | pcmciaBase)
+#define pcmciaIo (pcmciaIoOffset | pcmciaBase)
+
+#endif
diff -urN linux-2.6.17/bcmdrivers/opensource/include/bcm963xx/bcmTag.h linux-2.6.17-brcm63xx/bcmdrivers/opensource/include/bcm963xx/bcmTag.h
--- linux-2.6.17/bcmdrivers/opensource/include/bcm963xx/bcmTag.h 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.17-brcm63xx/bcmdrivers/opensource/include/bcm963xx/bcmTag.h 2006-07-25 10:43:50.000000000 +0200
@@ -0,0 +1,153 @@
+/*
+<:copyright-gpl
+ Copyright 2002 Broadcom Corp. All Rights Reserved.
+
+ This program is free software; you can distribute it and/or modify it
+ under the terms of the GNU General Public License (Version 2) as
+ published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+:>
+*/
+//**************************************************************************************
+// File Name : bcmTag.h
+//
+// Description: add tag with validation system to the firmware image file to be uploaded
+// via http
+//
+// Created : 02/28/2002 seanl
+//**************************************************************************************
+
+#ifndef _BCMTAG_H_
+#define _BCMTAG_H_
+
+
+#define BCM_SIG_1 "Broadcom Corporation"
+#define BCM_SIG_2 "ver. 2.0" // was "firmware version 2.0" now it is split 6 char out for chip id.
+
+#define BCM_TAG_VER "6"
+#define BCM_TAG_VER_LAST "26"
+
+// file tag (head) structure all is in clear text except validationTokens (crc, md5, sha1, etc). Total: 128 unsigned chars
+#define TAG_LEN 256
+#define TAG_VER_LEN 4
+#define SIG_LEN 20
+#define SIG_LEN_2 14 // Original second SIG = 20 is now devided into 14 for SIG_LEN_2 and 6 for CHIP_ID
+#define CHIP_ID_LEN 6
+#define IMAGE_LEN 10
+#define ADDRESS_LEN 12
+#define FLAG_LEN 2
+#define TOKEN_LEN 20
+#define BOARD_ID_LEN 16
+#define RESERVED_LEN (TAG_LEN - TAG_VER_LEN - SIG_LEN - SIG_LEN_2 - CHIP_ID_LEN - BOARD_ID_LEN - \
+ (4*IMAGE_LEN) - (3*ADDRESS_LEN) - (3*FLAG_LEN) - (2*TOKEN_LEN))
+
+
+// TAG for downloadable image (kernel plus file system)
+typedef struct _FILE_TAG
+{
+ unsigned char tagVersion[TAG_VER_LEN]; // tag version. Will be 2 here.
+ unsigned char signiture_1[SIG_LEN]; // text line for company info
+ unsigned char signiture_2[SIG_LEN_2]; // additional info (can be version number)
+ unsigned char chipId[CHIP_ID_LEN]; // chip id
+ unsigned char boardId[BOARD_ID_LEN]; // board id
+ unsigned char bigEndian[FLAG_LEN]; // if = 1 - big, = 0 - little endia of the host
+ unsigned char totalImageLen[IMAGE_LEN]; // the sum of all the following length
+ unsigned char cfeAddress[ADDRESS_LEN]; // if non zero, cfe starting address
+ unsigned char cfeLen[IMAGE_LEN]; // if non zero, cfe size in clear ASCII text.
+ unsigned char rootfsAddress[ADDRESS_LEN]; // if non zero, filesystem starting address
+ unsigned char rootfsLen[IMAGE_LEN]; // if non zero, filesystem size in clear ASCII text.
+ unsigned char kernelAddress[ADDRESS_LEN]; // if non zero, kernel starting address
+ unsigned char kernelLen[IMAGE_LEN]; // if non zero, kernel size in clear ASCII text.
+ unsigned char dualImage[FLAG_LEN]; // if 1, dual image
+ unsigned char inactiveLen[FLAG_LEN]; // if 1, the image is INACTIVE; if 0, active
+ unsigned char reserved[RESERVED_LEN]; // reserved for later use
+ unsigned char imageValidationToken[TOKEN_LEN];// image validation token - can be crc, md5, sha; for
+ // now will be 4 unsigned char crc
+ unsigned char tagValidationToken[TOKEN_LEN]; // validation token for tag(from signiture_1 to end of // mageValidationToken)
+} FILE_TAG, *PFILE_TAG;
+
+#define CRC32_INIT_VALUE 0xffffffff /* Initial CRC32 checksum value */
+#define CRC_LEN 4
+
+// only included if for bcmTag.exe program
+#ifdef BCMTAG_EXE_USE
+
+static unsigned long Crc32_table[256] = {
+ 0x00000000, 0x77073096, 0xEE0E612C, 0x990951BA,
+ 0x076DC419, 0x706AF48F, 0xE963A535, 0x9E6495A3,
+ 0x0EDB8832, 0x79DCB8A4, 0xE0D5E91E, 0x97D2D988,
+ 0x09B64C2B, 0x7EB17CBD, 0xE7B82D07, 0x90BF1D91,
+ 0x1DB71064, 0x6AB020F2, 0xF3B97148, 0x84BE41DE,
+ 0x1ADAD47D, 0x6DDDE4EB, 0xF4D4B551, 0x83D385C7,
+ 0x136C9856, 0x646BA8C0, 0xFD62F97A, 0x8A65C9EC,
+ 0x14015C4F, 0x63066CD9, 0xFA0F3D63, 0x8D080DF5,
+ 0x3B6E20C8, 0x4C69105E, 0xD56041E4, 0xA2677172,
+ 0x3C03E4D1, 0x4B04D447, 0xD20D85FD, 0xA50AB56B,
+ 0x35B5A8FA, 0x42B2986C, 0xDBBBC9D6, 0xACBCF940,
+ 0x32D86CE3, 0x45DF5C75, 0xDCD60DCF, 0xABD13D59,
+ 0x26D930AC, 0x51DE003A, 0xC8D75180, 0xBFD06116,
+ 0x21B4F4B5, 0x56B3C423, 0xCFBA9599, 0xB8BDA50F,
+ 0x2802B89E, 0x5F058808, 0xC60CD9B2, 0xB10BE924,
+ 0x2F6F7C87, 0x58684C11, 0xC1611DAB, 0xB6662D3D,
+ 0x76DC4190, 0x01DB7106, 0x98D220BC, 0xEFD5102A,
+ 0x71B18589, 0x06B6B51F, 0x9FBFE4A5, 0xE8B8D433,
+ 0x7807C9A2, 0x0F00F934, 0x9609A88E, 0xE10E9818,
+ 0x7F6A0DBB, 0x086D3D2D, 0x91646C97, 0xE6635C01,
+ 0x6B6B51F4, 0x1C6C6162, 0x856530D8, 0xF262004E,
+ 0x6C0695ED, 0x1B01A57B, 0x8208F4C1, 0xF50FC457,
+ 0x65B0D9C6, 0x12B7E950, 0x8BBEB8EA, 0xFCB9887C,
+ 0x62DD1DDF, 0x15DA2D49, 0x8CD37CF3, 0xFBD44C65,
+ 0x4DB26158, 0x3AB551CE, 0xA3BC0074, 0xD4BB30E2,
+ 0x4ADFA541, 0x3DD895D7, 0xA4D1C46D, 0xD3D6F4FB,
+ 0x4369E96A, 0x346ED9FC, 0xAD678846, 0xDA60B8D0,
+ 0x44042D73, 0x33031DE5, 0xAA0A4C5F, 0xDD0D7CC9,
+ 0x5005713C, 0x270241AA, 0xBE0B1010, 0xC90C2086,
+ 0x5768B525, 0x206F85B3, 0xB966D409, 0xCE61E49F,
+ 0x5EDEF90E, 0x29D9C998, 0xB0D09822, 0xC7D7A8B4,
+ 0x59B33D17, 0x2EB40D81, 0xB7BD5C3B, 0xC0BA6CAD,
+ 0xEDB88320, 0x9ABFB3B6, 0x03B6E20C, 0x74B1D29A,
+ 0xEAD54739, 0x9DD277AF, 0x04DB2615, 0x73DC1683,
+ 0xE3630B12, 0x94643B84, 0x0D6D6A3E, 0x7A6A5AA8,
+ 0xE40ECF0B, 0x9309FF9D, 0x0A00AE27, 0x7D079EB1,
+ 0xF00F9344, 0x8708A3D2, 0x1E01F268, 0x6906C2FE,
+ 0xF762575D, 0x806567CB, 0x196C3671, 0x6E6B06E7,
+ 0xFED41B76, 0x89D32BE0, 0x10DA7A5A, 0x67DD4ACC,
+ 0xF9B9DF6F, 0x8EBEEFF9, 0x17B7BE43, 0x60B08ED5,
+ 0xD6D6A3E8, 0xA1D1937E, 0x38D8C2C4, 0x4FDFF252,
+ 0xD1BB67F1, 0xA6BC5767, 0x3FB506DD, 0x48B2364B,
+ 0xD80D2BDA, 0xAF0A1B4C, 0x36034AF6, 0x41047A60,
+ 0xDF60EFC3, 0xA867DF55, 0x316E8EEF, 0x4669BE79,
+ 0xCB61B38C, 0xBC66831A, 0x256FD2A0, 0x5268E236,
+ 0xCC0C7795, 0xBB0B4703, 0x220216B9, 0x5505262F,
+ 0xC5BA3BBE, 0xB2BD0B28, 0x2BB45A92, 0x5CB36A04,
+ 0xC2D7FFA7, 0xB5D0CF31, 0x2CD99E8B, 0x5BDEAE1D,
+ 0x9B64C2B0, 0xEC63F226, 0x756AA39C, 0x026D930A,
+ 0x9C0906A9, 0xEB0E363F, 0x72076785, 0x05005713,
+ 0x95BF4A82, 0xE2B87A14, 0x7BB12BAE, 0x0CB61B38,
+ 0x92D28E9B, 0xE5D5BE0D, 0x7CDCEFB7, 0x0BDBDF21,
+ 0x86D3D2D4, 0xF1D4E242, 0x68DDB3F8, 0x1FDA836E,
+ 0x81BE16CD, 0xF6B9265B, 0x6FB077E1, 0x18B74777,
+ 0x88085AE6, 0xFF0F6A70, 0x66063BCA, 0x11010B5C,
+ 0x8F659EFF, 0xF862AE69, 0x616BFFD3, 0x166CCF45,
+ 0xA00AE278, 0xD70DD2EE, 0x4E048354, 0x3903B3C2,
+ 0xA7672661, 0xD06016F7, 0x4969474D, 0x3E6E77DB,
+ 0xAED16A4A, 0xD9D65ADC, 0x40DF0B66, 0x37D83BF0,
+ 0xA9BCAE53, 0xDEBB9EC5, 0x47B2CF7F, 0x30B5FFE9,
+ 0xBDBDF21C, 0xCABAC28A, 0x53B39330, 0x24B4A3A6,
+ 0xBAD03605, 0xCDD70693, 0x54DE5729, 0x23D967BF,
+ 0xB3667A2E, 0xC4614AB8, 0x5D681B02, 0x2A6F2B94,
+ 0xB40BBE37, 0xC30C8EA1, 0x5A05DF1B, 0x2D02EF8D
+};
+#endif // BCMTAG_USE
+
+
+#endif // _BCMTAG_H_
+
diff -urN linux-2.6.17/bcmdrivers/opensource/include/bcm963xx/bcmtypes.h linux-2.6.17-brcm63xx/bcmdrivers/opensource/include/bcm963xx/bcmtypes.h
--- linux-2.6.17/bcmdrivers/opensource/include/bcm963xx/bcmtypes.h 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.17-brcm63xx/bcmdrivers/opensource/include/bcm963xx/bcmtypes.h 2006-07-25 10:43:50.000000000 +0200
@@ -0,0 +1,163 @@
+/*
+<:copyright-gpl
+ Copyright 2002 Broadcom Corp. All Rights Reserved.
+
+ This program is free software; you can distribute it and/or modify it
+ under the terms of the GNU General Public License (Version 2) as
+ published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+:>
+*/
+
+//
+// bcmtypes.h - misc useful typedefs
+//
+#ifndef BCMTYPES_H
+#define BCMTYPES_H
+
+// These are also defined in typedefs.h in the application area, so I need to
+// protect against re-definition.
+
+#ifndef _TYPEDEFS_H_
+typedef unsigned char uint8;
+typedef unsigned short uint16;
+typedef unsigned long uint32;
+typedef signed char int8;
+typedef signed short int16;
+typedef signed long int32;
+#if !defined(__cplusplus)
+typedef int bool;
+#endif
+#endif
+
+typedef unsigned char byte;
+// typedef unsigned long sem_t;
+
+typedef unsigned long HANDLE,*PULONG,DWORD,*PDWORD;
+typedef signed long LONG,*PLONG;
+
+typedef unsigned int *PUINT;
+typedef signed int INT;
+
+typedef unsigned short *PUSHORT;
+typedef signed short SHORT,*PSHORT;
+typedef unsigned short WORD,*PWORD;
+
+typedef unsigned char *PUCHAR;
+typedef signed char *PCHAR;
+
+typedef void *PVOID;
+
+typedef unsigned char BOOLEAN, *PBOOL, *PBOOLEAN;
+
+typedef unsigned char BYTE,*PBYTE;
+
+//#ifndef __GNUC__
+//The following has been defined in Vxworks internally: vxTypesOld.h
+//redefine under vxworks will cause error
+typedef signed int *PINT;
+
+typedef signed char INT8;
+typedef signed short INT16;
+typedef signed long INT32;
+
+typedef unsigned char UINT8;
+typedef unsigned short UINT16;
+typedef unsigned long UINT32;
+
+typedef unsigned char UCHAR;
+typedef unsigned short USHORT;
+typedef unsigned int UINT;
+typedef unsigned long ULONG;
+
+typedef void VOID;
+typedef unsigned char BOOL;
+
+//#endif /* __GNUC__ */
+
+
+// These are also defined in typedefs.h in the application area, so I need to
+// protect against re-definition.
+#ifndef TYPEDEFS_H
+
+// Maximum and minimum values for a signed 16 bit integer.
+#define MAX_INT16 32767
+#define MIN_INT16 -32768
+
+// Useful for true/false return values. This uses the
+// Taligent notation (k for constant).
+typedef enum
+{
+ kFalse = 0,
+ kTrue = 1
+} Bool;
+
+#endif
+
+/* macros to protect against unaligned accesses */
+
+#if 0
+/* first arg is an address, second is a value */
+#define PUT16( a, d ) { \
+ *((byte *)a) = (byte)((d)>>8); \
+ *(((byte *)a)+1) = (byte)(d); \
+}
+
+#define PUT32( a, d ) { \
+ *((byte *)a) = (byte)((d)>>24); \
+ *(((byte *)a)+1) = (byte)((d)>>16); \
+ *(((byte *)a)+2) = (byte)((d)>>8); \
+ *(((byte *)a)+3) = (byte)(d); \
+}
+
+/* first arg is an address, returns a value */
+#define GET16( a ) ( \
+ (*((byte *)a) << 8) | \
+ (*(((byte *)a)+1)) \
+)
+
+#define GET32( a ) ( \
+ (*((byte *)a) << 24) | \
+ (*(((byte *)a)+1) << 16) | \
+ (*(((byte *)a)+2) << 8) | \
+ (*(((byte *)a)+3)) \
+)
+#endif
+
+#ifndef YES
+#define YES 1
+#endif
+
+#ifndef NO
+#define NO 0
+#endif
+
+#ifndef IN
+#define IN
+#endif
+
+#ifndef OUT
+#define OUT
+#endif
+
+#ifndef TRUE
+#define TRUE 1
+#endif
+
+#ifndef FALSE
+#define FALSE 0
+#endif
+
+#define READ32(addr) (*(volatile UINT32 *)((ULONG)&addr))
+#define READ16(addr) (*(volatile UINT16 *)((ULONG)&addr))
+#define READ8(addr) (*(volatile UINT8 *)((ULONG)&addr))
+
+#endif
diff -urN linux-2.6.17/bcmdrivers/opensource/include/bcm963xx/board.h linux-2.6.17-brcm63xx/bcmdrivers/opensource/include/bcm963xx/board.h
--- linux-2.6.17/bcmdrivers/opensource/include/bcm963xx/board.h 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.17-brcm63xx/bcmdrivers/opensource/include/bcm963xx/board.h 2006-07-25 11:00:10.000000000 +0200
@@ -0,0 +1,368 @@
+/*
+<:copyright-gpl
+ Copyright 2002 Broadcom Corp. All Rights Reserved.
+
+ This program is free software; you can distribute it and/or modify it
+ under the terms of the GNU General Public License (Version 2) as
+ published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+:>
+*/
+/***********************************************************************/
+/* */
+/* MODULE: board.h */
+/* DATE: 97/02/18 */
+/* PURPOSE: Board specific information. This module should include */
+/* all base device addresses and board specific macros. */
+/* */
+/***********************************************************************/
+#ifndef _BOARD_H
+#define _BOARD_H
+
+/*****************************************************************************/
+/* Misc board definitions */
+/*****************************************************************************/
+
+#define DYING_GASP_API
+
+/*****************************************************************************/
+/* Physical Memory Map */
+/*****************************************************************************/
+
+#define PHYS_DRAM_BASE 0x00000000 /* Dynamic RAM Base */
+#define PHYS_FLASH_BASE 0x1FC00000 /* Flash Memory */
+
+/*****************************************************************************/
+/* Note that the addresses above are physical addresses and that programs */
+/* have to use converted addresses defined below: */
+/*****************************************************************************/
+#define DRAM_BASE (0x80000000 | PHYS_DRAM_BASE) /* cached DRAM */
+#define DRAM_BASE_NOCACHE (0xA0000000 | PHYS_DRAM_BASE) /* uncached DRAM */
+#define FLASH_BASE (0xA0000000 | PHYS_FLASH_BASE) /* uncached Flash */
+
+/*****************************************************************************/
+/* Select the PLL value to get the desired CPU clock frequency. */
+/* */
+/* */
+/*****************************************************************************/
+#define FPERIPH 50000000
+
+#define ONEK 1024
+#define BLK64K (64*ONEK)
+#define FLASH45_BLKS_BOOT_ROM 1
+#define FLASH45_LENGTH_BOOT_ROM (FLASH45_BLKS_BOOT_ROM * BLK64K)
+#define FLASH_RESERVED_AT_END (64*ONEK) /*reserved for PSI, scratch pad*/
+
+/*****************************************************************************/
+/* Note that the addresses above are physical addresses and that programs */
+/* have to use converted addresses defined below: */
+/*****************************************************************************/
+#define DRAM_BASE (0x80000000 | PHYS_DRAM_BASE) /* cached DRAM */
+#define DRAM_BASE_NOCACHE (0xA0000000 | PHYS_DRAM_BASE) /* uncached DRAM */
+#define FLASH_BASE (0xA0000000 | PHYS_FLASH_BASE) /* uncached Flash */
+
+/*****************************************************************************/
+/* Select the PLL value to get the desired CPU clock frequency. */
+/* */
+/* */
+/*****************************************************************************/
+#define FPERIPH 50000000
+
+#define SDRAM_TYPE_ADDRESS_OFFSET 16
+#define NVRAM_DATA_OFFSET 0x0580
+#define NVRAM_DATA_ID 0x0f1e2d3c
+#define BOARD_SDRAM_TYPE *(unsigned long *) \
+ (FLASH_BASE + SDRAM_TYPE_ADDRESS_OFFSET)
+
+#define ONEK 1024
+#define BLK64K (64*ONEK)
+
+// nvram and psi flash definitions for 45
+#define FLASH45_LENGTH_NVRAM ONEK // 1k nvram
+#define NVRAM_PSI_DEFAULT 24 // default psi in K byes
+
+/*****************************************************************************/
+/* NVRAM Offset and definition */
+/*****************************************************************************/
+
+#define NVRAM_VERSION_NUMBER 2
+#define NVRAM_VERSION_NUMBER_ADDRESS 0
+
+#define NVRAM_BOOTLINE_LEN 256
+#define NVRAM_BOARD_ID_STRING_LEN 16
+#define NVRAM_MAC_ADDRESS_LEN 6
+#define NVRAM_MAC_COUNT_MAX 32
+
+/*****************************************************************************/
+/* Misc Offsets */
+/*****************************************************************************/
+
+#define CFE_VERSION_OFFSET 0x0570
+#define CFE_VERSION_MARK_SIZE 5
+#define CFE_VERSION_SIZE 5
+
+typedef struct
+{
+ unsigned long ulVersion;
+ char szBootline[NVRAM_BOOTLINE_LEN];
+ char szBoardId[NVRAM_BOARD_ID_STRING_LEN];
+ unsigned long ulReserved1[2];
+ unsigned long ulNumMacAddrs;
+ unsigned char ucaBaseMacAddr[NVRAM_MAC_ADDRESS_LEN];
+ char chReserved[2];
+ unsigned long ulCheckSum;
+} NVRAM_DATA, *PNVRAM_DATA;
+
+
+/*****************************************************************************/
+/* board ioctl calls for flash, led and some other utilities */
+/*****************************************************************************/
+
+
+/* Defines. for board driver */
+#define BOARD_IOCTL_MAGIC 'B'
+#define BOARD_DRV_MAJOR 206
+
+#define MAC_ADDRESS_ANY (unsigned long) -1
+
+#define BOARD_IOCTL_FLASH_INIT \
+ _IOWR(BOARD_IOCTL_MAGIC, 0, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_FLASH_WRITE \
+ _IOWR(BOARD_IOCTL_MAGIC, 1, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_FLASH_READ \
+ _IOWR(BOARD_IOCTL_MAGIC, 2, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_GET_NR_PAGES \
+ _IOWR(BOARD_IOCTL_MAGIC, 3, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_DUMP_ADDR \
+ _IOWR(BOARD_IOCTL_MAGIC, 4, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_SET_MEMORY \
+ _IOWR(BOARD_IOCTL_MAGIC, 5, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_MIPS_SOFT_RESET \
+ _IOWR(BOARD_IOCTL_MAGIC, 6, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_LED_CTRL \
+ _IOWR(BOARD_IOCTL_MAGIC, 7, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_GET_ID \
+ _IOWR(BOARD_IOCTL_MAGIC, 8, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_GET_MAC_ADDRESS \
+ _IOWR(BOARD_IOCTL_MAGIC, 9, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_RELEASE_MAC_ADDRESS \
+ _IOWR(BOARD_IOCTL_MAGIC, 10, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_GET_PSI_SIZE \
+ _IOWR(BOARD_IOCTL_MAGIC, 11, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_GET_SDRAM_SIZE \
+ _IOWR(BOARD_IOCTL_MAGIC, 12, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_SET_MONITOR_FD \
+ _IOWR(BOARD_IOCTL_MAGIC, 13, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_WAKEUP_MONITOR_TASK \
+ _IOWR(BOARD_IOCTL_MAGIC, 14, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_GET_BOOTLINE \
+ _IOWR(BOARD_IOCTL_MAGIC, 15, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_SET_BOOTLINE \
+ _IOWR(BOARD_IOCTL_MAGIC, 16, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_GET_BASE_MAC_ADDRESS \
+ _IOWR(BOARD_IOCTL_MAGIC, 17, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_GET_CHIP_ID \
+ _IOWR(BOARD_IOCTL_MAGIC, 18, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_GET_NUM_ENET \
+ _IOWR(BOARD_IOCTL_MAGIC, 19, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_GET_CFE_VER \
+ _IOWR(BOARD_IOCTL_MAGIC, 20, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_GET_ENET_CFG \
+ _IOWR(BOARD_IOCTL_MAGIC, 21, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_GET_WLAN_ANT_INUSE \
+ _IOWR(BOARD_IOCTL_MAGIC, 22, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_SET_TRIGGER_EVENT \
+ _IOWR(BOARD_IOCTL_MAGIC, 23, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_GET_TRIGGER_EVENT \
+ _IOWR(BOARD_IOCTL_MAGIC, 24, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_UNSET_TRIGGER_EVENT \
+ _IOWR(BOARD_IOCTL_MAGIC, 25, BOARD_IOCTL_PARMS)
+
+#define BOARD_IOCTL_SET_SES_LED \
+ _IOWR(BOARD_IOCTL_MAGIC, 26, BOARD_IOCTL_PARMS)
+
+//<<JUNHON, 2004/09/15, get reset button status , tim hou , 05/04/12
+#define RESET_BUTTON_UP 1
+#define RESET_BUTTON_PRESSDOWN 0
+#define BOARD_IOCTL_GET_RESETHOLD \
+ _IOWR(BOARD_IOCTL_MAGIC, 27, BOARD_IOCTL_PARMS)
+//>>JUNHON, 2004/09/15
+
+// for the action in BOARD_IOCTL_PARMS for flash operation
+typedef enum
+{
+ PERSISTENT,
+ NVRAM,
+ BCM_IMAGE_CFE,
+ BCM_IMAGE_FS,
+ BCM_IMAGE_KERNEL,
+ BCM_IMAGE_WHOLE,
+ SCRATCH_PAD,
+ FLASH_SIZE,
+} BOARD_IOCTL_ACTION;
+
+
+typedef struct boardIoctParms
+{
+ char *string;
+ char *buf;
+ int strLen;
+ int offset;
+ BOARD_IOCTL_ACTION action; /* flash read/write: nvram, persistent, bcm image */
+ int result;
+} BOARD_IOCTL_PARMS;
+
+
+// LED defines
+typedef enum
+{
+ kLedAdsl,
+ kLedWireless,
+ kLedUsb,
+ kLedHpna,
+ kLedWanData,
+ kLedPPP,
+ kLedVoip,
+ kLedSes,
+ kLedEnd, // NOTE: Insert the new led name before this one. Alway stay at the end.
+} BOARD_LED_NAME;
+
+typedef enum
+{
+ kLedStateOff, /* turn led off */
+ kLedStateOn, /* turn led on */
+ kLedStateFail, /* turn led on red */
+ kLedStateBlinkOnce, /* blink once, ~100ms and ignore the same call during the 100ms period */
+ kLedStateSlowBlinkContinues, /* slow blink continues at ~600ms interval */
+ kLedStateFastBlinkContinues, /* fast blink continues at ~200ms interval */
+} BOARD_LED_STATE;
+
+
+// virtual and physical map pair defined in board.c
+typedef struct ledmappair
+{
+ BOARD_LED_NAME ledName; // virtual led name
+ BOARD_LED_STATE ledInitState; // initial led state when the board boots.
+ unsigned short ledMask; // physical GPIO pin mask
+ unsigned short ledActiveLow; // reset bit to turn on LED
+ unsigned short ledMaskFail; // physical GPIO pin mask for state failure
+ unsigned short ledActiveLowFail;// reset bit to turn on LED
+} LED_MAP_PAIR, *PLED_MAP_PAIR;
+
+typedef void (*HANDLE_LED_FUNC)(BOARD_LED_NAME ledName, BOARD_LED_STATE ledState);
+
+/* Flash storage address information that is determined by the flash driver. */
+typedef struct flashaddrinfo
+{
+ int flash_persistent_start_blk;
+ int flash_persistent_number_blk;
+ int flash_persistent_length;
+ unsigned long flash_persistent_blk_offset;
+ int flash_scratch_pad_start_blk; // start before psi (SP_BUF_LEN)
+ int flash_scratch_pad_number_blk;
+ int flash_scratch_pad_length;
+ unsigned long flash_scratch_pad_blk_offset;
+ int flash_nvram_start_blk;
+ int flash_nvram_number_blk;
+ int flash_nvram_length;
+ unsigned long flash_nvram_blk_offset;
+} FLASH_ADDR_INFO, *PFLASH_ADDR_INFO;
+
+// scratch pad defines
+/* SP - Persisten Scratch Pad format:
+ sp header : 32 bytes
+ tokenId-1 : 8 bytes
+ tokenId-1 len : 4 bytes
+ tokenId-1 data
+ ....
+ tokenId-n : 8 bytes
+ tokenId-n len : 4 bytes
+ tokenId-n data
+*/
+
+#define MAGIC_NUM_LEN 8
+#define MAGIC_NUMBER "gOGoBrCm"
+#define TOKEN_NAME_LEN 16
+#define SP_VERSION 1
+#define SP_MAX_LEN 8 * 1024 // 8k buf before psi
+#define SP_RESERVERD 16
+
+typedef struct _SP_HEADER
+{
+ char SPMagicNum[MAGIC_NUM_LEN]; // 8 bytes of magic number
+ int SPVersion; // version number
+ int SPUsedLen; // used sp len
+ char SPReserved[SP_RESERVERD]; // reservied, total 32 bytes
+} SP_HEADER, *PSP_HEADER;
+
+typedef struct _TOKEN_DEF
+{
+ char tokenName[TOKEN_NAME_LEN];
+ int tokenLen;
+} SP_TOKEN, *PSP_TOKEN;
+
+
+/*****************************************************************************/
+/* Function Prototypes */
+/*****************************************************************************/
+#if !defined(__ASM_ASM_H)
+void dumpaddr( unsigned char *pAddr, int nLen );
+
+void kerSysFlashAddrInfoGet(PFLASH_ADDR_INFO pflash_addr_info);
+int kerSysNvRamGet(char *string, int strLen, int offset);
+int kerSysNvRamSet(char *string, int strLen, int offset);
+int kerSysPersistentGet(char *string, int strLen, int offset);
+int kerSysPersistentSet(char *string, int strLen, int offset);
+int kerSysScratchPadGet(char *tokName, char *tokBuf, int tokLen);
+int kerSysScratchPadSet(char *tokName, char *tokBuf, int tokLen);
+int kerSysBcmImageSet( int flash_start_addr, char *string, int size);
+int kerSysGetMacAddress( unsigned char *pucaAddr, unsigned long ulId );
+int kerSysReleaseMacAddress( unsigned char *pucaAddr );
+int kerSysGetSdramSize( void );
+void kerSysGetBootline(char *string, int strLen);
+void kerSysSetBootline(char *string, int strLen);
+void kerSysMipsSoftReset(void);
+void kerSysLedCtrl(BOARD_LED_NAME, BOARD_LED_STATE);
+void kerSysLedRegisterHwHandler( BOARD_LED_NAME, HANDLE_LED_FUNC, int );
+int kerSysFlashSizeGet(void);
+void kerSysRegisterDyingGaspHandler(char *devname, void *cbfn, void *context);
+void kerSysDeregisterDyingGaspHandler(char *devname);
+void kerSysWakeupMonitorTask( void );
+#endif
+
+
+#endif /* _BOARD_H */
+
diff -urN linux-2.6.17/bcmdrivers/opensource/Makefile linux-2.6.17-brcm63xx/bcmdrivers/opensource/Makefile
--- linux-2.6.17/bcmdrivers/opensource/Makefile 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.17-brcm63xx/bcmdrivers/opensource/Makefile 2006-07-25 10:43:50.000000000 +0200
@@ -0,0 +1,20 @@
+# File: modules/drivers/Makefile
+#
+# Makefile for the GPLed Linux kernel modules.
+#
+
+LN_NAME=bcm9$(BRCM_CHIP)
+LN_DRIVER_DIRS =
+
+-include $(KERNEL_DIR)/.config
+
+ifneq ($(CONFIG_BCM_SERIAL),)
+ LN_DRIVER_DIRS +=ln -sn impl$(CONFIG_BCM_SERIAL_IMPL) char/serial/$(LN_NAME);
+endif
+
+obj-$(CONFIG_BCM_SERIAL) += char/serial/impl$(CONFIG_BCM_SERIAL_IMPL)/
+
+
+symlinks:
+ find . -lname "*" -name "$(LN_NAME)" -print -exec rm -f "{}" ";"
+ $(CONFIG_SHELL) -c "$(LN_DRIVER_DIRS)"
View Git Blame Copy Permalink