mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-11-05 16:19:42 +02:00
f043f99dc0
The first problem is the "chat" command which misses "-E", so the environment variable addressed inside the script is never used and the script breaks. The second problem is the that you cannot assume an Option card when you did "not discover a Novatel". In my case the script tried to set the mode with the Option AT-command which failed on the Huawei stick. Unfortunaltely I don't have a correct command for that device, so I just want to start the connection without any mode set before thus using the defaults. Signed-off-by: Markus Wigge <mwigge@marcant.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10774 3c298f89-4303-0410-b956-a3cf2f4a3e73
99 lines
2.2 KiB
Bash
99 lines
2.2 KiB
Bash
set_3g_led() {
|
|
grep WRT54G3G /proc/diag/model >/dev/null || return 0
|
|
echo "$1" > /proc/diag/led/3g_green
|
|
echo "$2" > /proc/diag/led/3g_blue
|
|
echo "$3" > /proc/diag/led/3g_blink
|
|
}
|
|
|
|
scan_3g() {
|
|
local device
|
|
|
|
scan_ppp "$@"
|
|
config_get device "$1" device
|
|
|
|
# try to figure out the device if it's invalid
|
|
[ -n "$device" -a -e "$device" ] || {
|
|
for device in /dev/ttyUSB0 /dev/ttyUSB1 /dev/ttyUSB2 /dev/tts/2 /dev/usb/tts/0 /dev/noz0; do
|
|
[ -e "$device" ] && {
|
|
config_set "$1" device "$device"
|
|
break
|
|
}
|
|
done
|
|
}
|
|
|
|
# enable 3G with the 3G button by default
|
|
config_get button "$1" button
|
|
[ -z "$button" ] && {
|
|
config_set "$1" button 1
|
|
}
|
|
}
|
|
|
|
stop_interface_3g() {
|
|
set_3g_led 0 0 0
|
|
killall gcom >/dev/null 2>/dev/null
|
|
}
|
|
|
|
setup_interface_3g() {
|
|
local iface="$1"
|
|
local config="$2"
|
|
local chat="/etc/chatscripts/3g.chat"
|
|
|
|
config_get device "$config" device
|
|
|
|
for module in slhc ppp_generic ppp_async; do
|
|
/sbin/insmod $module 2>&- >&-
|
|
done
|
|
|
|
config_get apn "$cfg" apn
|
|
config_get service "$cfg" service
|
|
config_get pincode "$cfg" pincode
|
|
config_get mtu "$cfg" mtu
|
|
|
|
set_3g_led 1 0 1
|
|
|
|
# figure out hardware specific commands for the card
|
|
case "$service" in
|
|
cdma|evdo) chat="/etc/chatscripts/evdo.chat";;
|
|
*)
|
|
cardinfo=$(gcom -d "$device" -s /etc/gcom/getcardinfo.gcom)
|
|
if echo "$cardinfo" | grep Novatel; then
|
|
case "$service" in
|
|
umts_only) CODE=2;;
|
|
gprs_only) CODE=1;;
|
|
*) CODE=0;;
|
|
esac
|
|
mode="AT\$NWRAT=${CODE},2"
|
|
elif echo "$cardinfo" | grep Option; then
|
|
case "$service" in
|
|
umts_only) CODE=1;;
|
|
gprs_only) CODE=0;;
|
|
*) CODE=3;;
|
|
esac
|
|
mode="AT_OPSYS=${CODE}"
|
|
fi
|
|
# Don't assume Option to be default as it breaks with Huawei Cards/Sticks
|
|
|
|
PINCODE="$pincode" gcom -d "$device" -s /etc/gcom/setpin.gcom || {
|
|
echo "$cfg(3g): Failed to set the PIN code."
|
|
set_3g_led 0 0 0
|
|
return 1
|
|
}
|
|
test -z "$mode" || {
|
|
MODE="$mode" gcom -d "$device" -s /etc/gcom/setmode.gcom
|
|
}
|
|
esac
|
|
set_3g_led 1 0 0
|
|
|
|
config_set "$config" "connect" "${apn:+USE_APN=$apn }/usr/sbin/chat -t5 -v -E -f $chat"
|
|
start_pppd "$config" \
|
|
noaccomp \
|
|
nopcomp \
|
|
novj \
|
|
nobsdcomp \
|
|
noauth \
|
|
lock \
|
|
crtscts \
|
|
${mtu:+mtu $mtu mru $mtu} \
|
|
115200 "$device"
|
|
}
|