1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-24 18:34:37 +02:00
openwrt-xburst/target/linux/s3c24xx/patches-2.6.24/1250-add-glamo-mci-slower-clocking-dynamic-switching.patc.patch
mirko fc54b9bf15 changed Makefile and profiles, added patches for kernel 2.6.24
(stable-branch of Openmoko)


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13613 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-12-12 11:58:53 +00:00

121 lines
4.3 KiB
Diff

From 6d8e14dc4253f3921aff1bbbeb3caf073aa6a7b2 Mon Sep 17 00:00:00 2001
From: Andy Green <andy@openmoko.com>
Date: Wed, 30 Jul 2008 12:46:44 +0100
Subject: [PATCH] add-glamo-mci-slower-clocking-dynamic-switching.patch
This patch gives glamo-mci a concept of a platform-defined
dynamic clock slowing callback. It means that platform code
can associate some completely external state to decide if
we run the SD clock at normal rate or a rate divided by a
module parameter "sd_slow_ratio", which you can set on
kernel commandline like this:
glamo_mci.sd_slow_ratio=8
you can also change it at runtime by
echo 8 > /sys/module/glamo_mci/parameters/sd_slow_ratio
If no platform callback is defined, then no slow mode
is used. If it is defined, then the default division
action is / 8, eg, 16MHz normal -> 2MHz slow mode.
Signed-off-by: Andy Green <andy@openmoko.com>
---
drivers/mfd/glamo/glamo-core.c | 2 ++
drivers/mfd/glamo/glamo-core.h | 2 ++
drivers/mfd/glamo/glamo-mci.c | 30 ++++++++++++++++++++++++++++--
include/linux/glamofb.h | 2 ++
4 files changed, 34 insertions(+), 2 deletions(-)
diff --git a/drivers/mfd/glamo/glamo-core.c b/drivers/mfd/glamo/glamo-core.c
index f411446..c094a8c 100644
--- a/drivers/mfd/glamo/glamo-core.c
+++ b/drivers/mfd/glamo/glamo-core.c
@@ -1114,6 +1114,8 @@ static int __init glamo_probe(struct platform_device *pdev)
/* bring MCI specific stuff over from our MFD platform data */
glamo_mci_def_pdata.glamo_set_mci_power =
glamo->pdata->glamo_set_mci_power;
+ glamo_mci_def_pdata.glamo_mci_use_slow =
+ glamo->pdata->glamo_mci_use_slow;
glamo_mci_def_pdata.glamo_irq_is_wired =
glamo->pdata->glamo_irq_is_wired;
glamo_mci_def_pdata.mci_suspending =
diff --git a/drivers/mfd/glamo/glamo-core.h b/drivers/mfd/glamo/glamo-core.h
index 8d647ec..d3f4309 100644
--- a/drivers/mfd/glamo/glamo-core.h
+++ b/drivers/mfd/glamo/glamo-core.h
@@ -72,6 +72,8 @@ struct glamo_mci_pdata {
unsigned long ocr_avail;
void (*glamo_set_mci_power)(unsigned char power_mode,
unsigned short vdd);
+ /* glamo-mci asking if it should use the slow clock to card */
+ int (*glamo_mci_use_slow)(void);
int (*glamo_irq_is_wired)(void);
void (*mci_suspending)(struct platform_device *dev);
int (*mci_all_dependencies_resumed)(struct platform_device
diff --git a/drivers/mfd/glamo/glamo-mci.c b/drivers/mfd/glamo/glamo-mci.c
index 54ba613..577021e 100644
--- a/drivers/mfd/glamo/glamo-mci.c
+++ b/drivers/mfd/glamo/glamo-mci.c
@@ -57,6 +57,23 @@ static int sd_max_clk = 50000000 / 3;
module_param(sd_max_clk, int, 0644);
/*
+ * Slow SD clock rate
+ *
+ * you can override this on kernel commandline using
+ *
+ * glamo_mci.sd_slow_ratio=8
+ *
+ * for example
+ *
+ * platform callback is used to decide effective clock rate, if not
+ * defined then max is used, if defined and returns nonzero, rate is
+ * divided by this factor
+ */
+
+static int sd_slow_ratio = 8;
+module_param(sd_slow_ratio, int, 0644);
+
+/*
* SD Signal drive strength
*
* you can override this on kernel commandline using
@@ -554,8 +571,17 @@ static void glamo_mci_send_request(struct mmc_host *mmc)
cmd->opcode, cmd->arg, cmd->data, cmd->mrq->stop,
cmd->flags);
- /* resume requested clock rate */
- __glamo_mci_fix_card_div(host, host->clk_div);
+ /* resume requested clock rate
+ * scale it down by sd_slow_ratio if platform requests it
+ */
+ if (host->pdata->glamo_mci_use_slow)
+ if ((host->pdata->glamo_mci_use_slow)())
+ __glamo_mci_fix_card_div(host, host->clk_div *
+ sd_slow_ratio);
+ else
+ __glamo_mci_fix_card_div(host, host->clk_div);
+ else
+ __glamo_mci_fix_card_div(host, host->clk_div);
if (glamo_mci_send_command(host, cmd))
goto bail;
diff --git a/include/linux/glamofb.h b/include/linux/glamofb.h
index efd315b..b101e9c 100644
--- a/include/linux/glamofb.h
+++ b/include/linux/glamofb.h
@@ -31,6 +31,8 @@ struct glamofb_platform_data {
/* glamo mmc platform specific info */
void (*glamo_set_mci_power)(unsigned char power_mode,
unsigned short vdd);
+ /* glamo-mci asking if it should use the slow clock to card */
+ int (*glamo_mci_use_slow)(void);
int (*glamo_irq_is_wired)(void);
void (*mci_suspending)(struct platform_device *dev);
int (*mci_all_dependencies_resumed)(struct platform_device
--
1.5.6.5