1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-24 19:37:43 +02:00
openwrt-xburst/target/linux/s3c24xx/patches-2.6.26/1216-fix-scard-stop-on-resume.patch.patch
mirko a95f9f92e2 change prefix for kernelpatchbase 2.6.26
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13619 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-12-13 01:54:56 +00:00

52 lines
1.8 KiB
Diff
Executable File

From 81b94de6dbb00676ddca78219eacf41b1928b33f Mon Sep 17 00:00:00 2001
From: Andy Green <andy@openmoko.com>
Date: Fri, 25 Jul 2008 23:06:20 +0100
Subject: [PATCH] fix-scard-stop-on-resume.patch
Reported-by: Ville-Pekka Vainio <vpivaini@cs.helsinki.fi>
The reporter noticed SD Card clock is running again after resume. After
looking at the code I saw I missed two tricks, this will force it off
after resume and will do better generally depending on what the last SD Card
packet was.
Since bulk read packet is normally last action (which set the clock off even
without this) the old patch worked for normal cases. But after resume, the last
packet on the wire was not a bulk transfer and we didn't take care about the
clock then.
Signed-off-by: Andy Green <andy@openmoko.com>
---
drivers/mfd/glamo/glamo-mci.c | 6 +++---
1 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/mfd/glamo/glamo-mci.c b/drivers/mfd/glamo/glamo-mci.c
index 67bb815..93f4074 100644
--- a/drivers/mfd/glamo/glamo-mci.c
+++ b/drivers/mfd/glamo/glamo-mci.c
@@ -619,12 +619,9 @@ done:
host->complete_what = COMPLETION_NONE;
host->mrq = NULL;
mmc_request_done(host->mmc, cmd->mrq);
- return;
-
bail:
/* stop the clock to card */
__glamo_mci_fix_card_div(host, -1);
- return;
}
static void glamo_mci_request(struct mmc_host *mmc, struct mmc_request *mrq)
@@ -690,6 +687,9 @@ static void glamo_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
host->real_rate = __glamo_mci_set_card_clock(host, ios->clock, &div);
host->clk_div = div;
+ /* stop the clock to card, because we are idle until transfer */
+ __glamo_mci_fix_card_div(host, -1);
+
if ((ios->power_mode == MMC_POWER_ON) ||
(ios->power_mode == MMC_POWER_UP)) {
dev_info(&host->pdev->dev,
--
1.5.6.3