mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-08-21 01:25:52 +03:00
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18779 3c298f89-4303-0410-b956-a3cf2f4a3e73
9840 lines
288 KiB
Diff
9840 lines
288 KiB
Diff
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
|
||
index 1c4119c..e861e32 100644
|
||
--- a/arch/arm/Kconfig
|
||
+++ b/arch/arm/Kconfig
|
||
@@ -1508,6 +1508,10 @@ source "net/Kconfig"
|
||
|
||
source "drivers/Kconfig"
|
||
|
||
+if ARCH_OMAP
|
||
+source "drivers/cbus/Kconfig"
|
||
+endif
|
||
+
|
||
source "fs/Kconfig"
|
||
|
||
source "arch/arm/Kconfig.debug"
|
||
diff --git a/arch/arm/configs/n8x0_defconfig b/arch/arm/configs/n8x0_defconfig
|
||
index 8da75de..264f52b 100644
|
||
--- a/arch/arm/configs/n8x0_defconfig
|
||
+++ b/arch/arm/configs/n8x0_defconfig
|
||
@@ -304,7 +304,7 @@ CONFIG_ALIGNMENT_TRAP=y
|
||
CONFIG_ZBOOT_ROM_TEXT=0x10C08000
|
||
CONFIG_ZBOOT_ROM_BSS=0x10200000
|
||
# CONFIG_ZBOOT_ROM is not set
|
||
-CONFIG_CMDLINE="root=1f03 rootfstype=jffs2 console=ttyS0,115200n8"
|
||
+CONFIG_CMDLINE="root=1f03 rootfstype=jffs2 console=ttyS2,115200n8"
|
||
# CONFIG_XIP_KERNEL is not set
|
||
# CONFIG_KEXEC is not set
|
||
|
||
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
|
||
index a7ead1b..74720e6 100644
|
||
--- a/arch/arm/mach-omap1/board-fsample.c
|
||
+++ b/arch/arm/mach-omap1/board-fsample.c
|
||
@@ -107,7 +107,7 @@ static struct resource smc91x_resources[] = {
|
||
.flags = IORESOURCE_MEM,
|
||
},
|
||
[1] = {
|
||
- .start = INT_730_MPU_EXT_NIRQ,
|
||
+ .start = INT_7XX_MPU_EXT_NIRQ,
|
||
.end = 0,
|
||
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
|
||
},
|
||
@@ -196,8 +196,8 @@ static struct platform_device smc91x_device = {
|
||
|
||
static struct resource kp_resources[] = {
|
||
[0] = {
|
||
- .start = INT_730_MPUIO_KEYPAD,
|
||
- .end = INT_730_MPUIO_KEYPAD,
|
||
+ .start = INT_7XX_MPUIO_KEYPAD,
|
||
+ .end = INT_7XX_MPUIO_KEYPAD,
|
||
.flags = IORESOURCE_IRQ,
|
||
},
|
||
};
|
||
@@ -309,7 +309,7 @@ static void __init omap_fsample_map_io(void)
|
||
/*
|
||
* Hold GSM Reset until needed
|
||
*/
|
||
- omap_writew(omap_readw(OMAP730_DSP_M_CTL) & ~1, OMAP730_DSP_M_CTL);
|
||
+ omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL);
|
||
|
||
/*
|
||
* UARTs -> done automagically by 8250 driver
|
||
@@ -320,21 +320,21 @@ static void __init omap_fsample_map_io(void)
|
||
*/
|
||
|
||
/* Flash: CS0 timings setup */
|
||
- omap_writel(0x0000fff3, OMAP730_FLASH_CFG_0);
|
||
- omap_writel(0x00000088, OMAP730_FLASH_ACFG_0);
|
||
+ omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0);
|
||
+ omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0);
|
||
|
||
/*
|
||
* Ethernet support through the debug board
|
||
* CS1 timings setup
|
||
*/
|
||
- omap_writel(0x0000fff3, OMAP730_FLASH_CFG_1);
|
||
- omap_writel(0x00000000, OMAP730_FLASH_ACFG_1);
|
||
+ omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1);
|
||
+ omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1);
|
||
|
||
/*
|
||
* Configure MPU_EXT_NIRQ IO in IO_CONF9 register,
|
||
* It is used as the Ethernet controller interrupt
|
||
*/
|
||
- omap_writel(omap_readl(OMAP730_IO_CONF_9) & 0x1FFFFFFF, OMAP730_IO_CONF_9);
|
||
+ omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF, OMAP7XX_IO_CONF_9);
|
||
}
|
||
|
||
MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample")
|
||
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
|
||
index 8340669..2f897cf 100644
|
||
--- a/arch/arm/mach-omap1/board-perseus2.c
|
||
+++ b/arch/arm/mach-omap1/board-perseus2.c
|
||
@@ -74,7 +74,7 @@ static struct resource smc91x_resources[] = {
|
||
.flags = IORESOURCE_MEM,
|
||
},
|
||
[1] = {
|
||
- .start = INT_730_MPU_EXT_NIRQ,
|
||
+ .start = INT_7XX_MPU_EXT_NIRQ,
|
||
.end = 0,
|
||
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
|
||
},
|
||
@@ -163,8 +163,8 @@ static struct platform_device smc91x_device = {
|
||
|
||
static struct resource kp_resources[] = {
|
||
[0] = {
|
||
- .start = INT_730_MPUIO_KEYPAD,
|
||
- .end = INT_730_MPUIO_KEYPAD,
|
||
+ .start = INT_7XX_MPUIO_KEYPAD,
|
||
+ .end = INT_7XX_MPUIO_KEYPAD,
|
||
.flags = IORESOURCE_IRQ,
|
||
},
|
||
};
|
||
@@ -270,7 +270,7 @@ static void __init omap_perseus2_map_io(void)
|
||
/*
|
||
* Hold GSM Reset until needed
|
||
*/
|
||
- omap_writew(omap_readw(OMAP730_DSP_M_CTL) & ~1, OMAP730_DSP_M_CTL);
|
||
+ omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL);
|
||
|
||
/*
|
||
* UARTs -> done automagically by 8250 driver
|
||
@@ -281,21 +281,21 @@ static void __init omap_perseus2_map_io(void)
|
||
*/
|
||
|
||
/* Flash: CS0 timings setup */
|
||
- omap_writel(0x0000fff3, OMAP730_FLASH_CFG_0);
|
||
- omap_writel(0x00000088, OMAP730_FLASH_ACFG_0);
|
||
+ omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0);
|
||
+ omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0);
|
||
|
||
/*
|
||
* Ethernet support through the debug board
|
||
* CS1 timings setup
|
||
*/
|
||
- omap_writel(0x0000fff3, OMAP730_FLASH_CFG_1);
|
||
- omap_writel(0x00000000, OMAP730_FLASH_ACFG_1);
|
||
+ omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1);
|
||
+ omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1);
|
||
|
||
/*
|
||
* Configure MPU_EXT_NIRQ IO in IO_CONF9 register,
|
||
* It is used as the Ethernet controller interrupt
|
||
*/
|
||
- omap_writel(omap_readl(OMAP730_IO_CONF_9) & 0x1FFFFFFF, OMAP730_IO_CONF_9);
|
||
+ omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF, OMAP7XX_IO_CONF_9);
|
||
}
|
||
|
||
MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2")
|
||
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
|
||
index 436eed2..5f77b83 100644
|
||
--- a/arch/arm/mach-omap1/clock.c
|
||
+++ b/arch/arm/mach-omap1/clock.c
|
||
@@ -69,13 +69,13 @@ struct omap_clk {
|
||
}
|
||
|
||
#define CK_310 (1 << 0)
|
||
-#define CK_730 (1 << 1)
|
||
+#define CK_7XX (1 << 1)
|
||
#define CK_1510 (1 << 2)
|
||
#define CK_16XX (1 << 3)
|
||
|
||
static struct omap_clk omap_clks[] = {
|
||
/* non-ULPD clocks */
|
||
- CLK(NULL, "ck_ref", &ck_ref, CK_16XX | CK_1510 | CK_310),
|
||
+ CLK(NULL, "ck_ref", &ck_ref, CK_16XX | CK_1510 | CK_310 | CK_7XX),
|
||
CLK(NULL, "ck_dpll1", &ck_dpll1, CK_16XX | CK_1510 | CK_310),
|
||
/* CK_GEN1 clocks */
|
||
CLK(NULL, "ck_dpll1out", &ck_dpll1out.clk, CK_16XX),
|
||
@@ -83,7 +83,7 @@ static struct omap_clk omap_clks[] = {
|
||
CLK(NULL, "arm_ck", &arm_ck, CK_16XX | CK_1510 | CK_310),
|
||
CLK(NULL, "armper_ck", &armper_ck.clk, CK_16XX | CK_1510 | CK_310),
|
||
CLK(NULL, "arm_gpio_ck", &arm_gpio_ck, CK_1510 | CK_310),
|
||
- CLK(NULL, "armxor_ck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310),
|
||
+ CLK(NULL, "armxor_ck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX),
|
||
CLK(NULL, "armtim_ck", &armtim_ck.clk, CK_16XX | CK_1510 | CK_310),
|
||
CLK("omap_wdt", "fck", &armwdt_ck.clk, CK_16XX | CK_1510 | CK_310),
|
||
CLK("omap_wdt", "ick", &armper_ck.clk, CK_16XX),
|
||
@@ -97,7 +97,7 @@ static struct omap_clk omap_clks[] = {
|
||
CLK(NULL, "dspxor_ck", &dspxor_ck, CK_16XX | CK_1510 | CK_310),
|
||
CLK(NULL, "dsptim_ck", &dsptim_ck, CK_16XX | CK_1510 | CK_310),
|
||
/* CK_GEN3 clocks */
|
||
- CLK(NULL, "tc_ck", &tc_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_730),
|
||
+ CLK(NULL, "tc_ck", &tc_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX),
|
||
CLK(NULL, "tipb_ck", &tipb_ck, CK_1510 | CK_310),
|
||
CLK(NULL, "l3_ocpi_ck", &l3_ocpi_ck, CK_16XX),
|
||
CLK(NULL, "tc1_ck", &tc1_ck, CK_16XX),
|
||
@@ -108,7 +108,7 @@ static struct omap_clk omap_clks[] = {
|
||
CLK(NULL, "lb_ck", &lb_ck.clk, CK_1510 | CK_310),
|
||
CLK(NULL, "rhea1_ck", &rhea1_ck, CK_16XX),
|
||
CLK(NULL, "rhea2_ck", &rhea2_ck, CK_16XX),
|
||
- CLK(NULL, "lcd_ck", &lcd_ck_16xx, CK_16XX | CK_730),
|
||
+ CLK(NULL, "lcd_ck", &lcd_ck_16xx, CK_16XX | CK_7XX),
|
||
CLK(NULL, "lcd_ck", &lcd_ck_1510.clk, CK_1510 | CK_310),
|
||
/* ULPD clocks */
|
||
CLK(NULL, "uart1_ck", &uart1_1510, CK_1510 | CK_310),
|
||
@@ -398,7 +398,7 @@ static int omap1_select_table_rate(struct clk * clk, unsigned long rate)
|
||
* Reprogramming the DPLL is tricky, it must be done from SRAM.
|
||
* (on 730, bit 13 must always be 1)
|
||
*/
|
||
- if (cpu_is_omap730())
|
||
+ if (cpu_is_omap7xx())
|
||
omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val | 0x2000);
|
||
else
|
||
omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val);
|
||
@@ -783,8 +783,8 @@ int __init omap1_clk_init(void)
|
||
cpu_mask |= CK_16XX;
|
||
if (cpu_is_omap1510())
|
||
cpu_mask |= CK_1510;
|
||
- if (cpu_is_omap730())
|
||
- cpu_mask |= CK_730;
|
||
+ if (cpu_is_omap7xx())
|
||
+ cpu_mask |= CK_7XX;
|
||
if (cpu_is_omap310())
|
||
cpu_mask |= CK_310;
|
||
|
||
@@ -800,7 +800,7 @@ int __init omap1_clk_init(void)
|
||
crystal_type = info->system_clock_type;
|
||
}
|
||
|
||
-#if defined(CONFIG_ARCH_OMAP730)
|
||
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
|
||
ck_ref.rate = 13000000;
|
||
#elif defined(CONFIG_ARCH_OMAP16XX)
|
||
if (crystal_type == 2)
|
||
@@ -847,7 +847,7 @@ int __init omap1_clk_init(void)
|
||
printk(KERN_ERR "System frequencies not set. Check your config.\n");
|
||
/* Guess sane values (60MHz) */
|
||
omap_writew(0x2290, DPLL_CTL);
|
||
- omap_writew(cpu_is_omap730() ? 0x3005 : 0x1005, ARM_CKCTL);
|
||
+ omap_writew(cpu_is_omap7xx() ? 0x3005 : 0x1005, ARM_CKCTL);
|
||
ck_dpll1.rate = 60000000;
|
||
}
|
||
#endif
|
||
@@ -862,7 +862,7 @@ int __init omap1_clk_init(void)
|
||
|
||
#if defined(CONFIG_MACH_OMAP_PERSEUS2) || defined(CONFIG_MACH_OMAP_FSAMPLE)
|
||
/* Select slicer output as OMAP input clock */
|
||
- omap_writew(omap_readw(OMAP730_PCC_UPLD_CTRL) & ~0x1, OMAP730_PCC_UPLD_CTRL);
|
||
+ omap_writew(omap_readw(OMAP7XX_PCC_UPLD_CTRL) & ~0x1, OMAP7XX_PCC_UPLD_CTRL);
|
||
#endif
|
||
|
||
/* Amstrad Delta wants BCLK high when inactive */
|
||
@@ -873,7 +873,7 @@ int __init omap1_clk_init(void)
|
||
|
||
/* Turn off DSP and ARM_TIMXO. Make sure ARM_INTHCK is not divided */
|
||
/* (on 730, bit 13 must not be cleared) */
|
||
- if (cpu_is_omap730())
|
||
+ if (cpu_is_omap7xx())
|
||
omap_writew(omap_readw(ARM_CKCTL) & 0x2fff, ARM_CKCTL);
|
||
else
|
||
omap_writew(omap_readw(ARM_CKCTL) & 0x0fff, ARM_CKCTL);
|
||
diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
|
||
index 7030f92..a27df2c 100644
|
||
--- a/arch/arm/mach-omap1/io.c
|
||
+++ b/arch/arm/mach-omap1/io.c
|
||
@@ -36,33 +36,17 @@ static struct map_desc omap_io_desc[] __initdata = {
|
||
}
|
||
};
|
||
|
||
-#ifdef CONFIG_ARCH_OMAP730
|
||
-static struct map_desc omap730_io_desc[] __initdata = {
|
||
+#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850)
|
||
+static struct map_desc omap7xx_io_desc[] __initdata = {
|
||
{
|
||
- .virtual = OMAP730_DSP_BASE,
|
||
- .pfn = __phys_to_pfn(OMAP730_DSP_START),
|
||
- .length = OMAP730_DSP_SIZE,
|
||
+ .virtual = OMAP7XX_DSP_BASE,
|
||
+ .pfn = __phys_to_pfn(OMAP7XX_DSP_START),
|
||
+ .length = OMAP7XX_DSP_SIZE,
|
||
.type = MT_DEVICE
|
||
}, {
|
||
- .virtual = OMAP730_DSPREG_BASE,
|
||
- .pfn = __phys_to_pfn(OMAP730_DSPREG_START),
|
||
- .length = OMAP730_DSPREG_SIZE,
|
||
- .type = MT_DEVICE
|
||
- }
|
||
-};
|
||
-#endif
|
||
-
|
||
-#ifdef CONFIG_ARCH_OMAP850
|
||
-static struct map_desc omap850_io_desc[] __initdata = {
|
||
- {
|
||
- .virtual = OMAP850_DSP_BASE,
|
||
- .pfn = __phys_to_pfn(OMAP850_DSP_START),
|
||
- .length = OMAP850_DSP_SIZE,
|
||
- .type = MT_DEVICE
|
||
- }, {
|
||
- .virtual = OMAP850_DSPREG_BASE,
|
||
- .pfn = __phys_to_pfn(OMAP850_DSPREG_START),
|
||
- .length = OMAP850_DSPREG_SIZE,
|
||
+ .virtual = OMAP7XX_DSPREG_BASE,
|
||
+ .pfn = __phys_to_pfn(OMAP7XX_DSPREG_START),
|
||
+ .length = OMAP7XX_DSPREG_SIZE,
|
||
.type = MT_DEVICE
|
||
}
|
||
};
|
||
@@ -120,18 +104,11 @@ void __init omap1_map_common_io(void)
|
||
*/
|
||
omap_check_revision();
|
||
|
||
-#ifdef CONFIG_ARCH_OMAP730
|
||
- if (cpu_is_omap730()) {
|
||
- iotable_init(omap730_io_desc, ARRAY_SIZE(omap730_io_desc));
|
||
- }
|
||
-#endif
|
||
-
|
||
-#ifdef CONFIG_ARCH_OMAP850
|
||
- if (cpu_is_omap850()) {
|
||
- iotable_init(omap850_io_desc, ARRAY_SIZE(omap850_io_desc));
|
||
+#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850)
|
||
+ if (cpu_is_omap7xx()) {
|
||
+ iotable_init(omap7xx_io_desc, ARRAY_SIZE(omap7xx_io_desc));
|
||
}
|
||
#endif
|
||
-
|
||
#ifdef CONFIG_ARCH_OMAP15XX
|
||
if (cpu_is_omap15xx()) {
|
||
iotable_init(omap1510_io_desc, ARRAY_SIZE(omap1510_io_desc));
|
||
diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c
|
||
index de03c84..8f98b58 100644
|
||
--- a/arch/arm/mach-omap1/irq.c
|
||
+++ b/arch/arm/mach-omap1/irq.c
|
||
@@ -137,16 +137,8 @@ static void omap_irq_set_cfg(int irq, int fiq, int priority, int trigger)
|
||
irq_bank_writel(val, bank, offset);
|
||
}
|
||
|
||
-#ifdef CONFIG_ARCH_OMAP730
|
||
-static struct omap_irq_bank omap730_irq_banks[] = {
|
||
- { .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3f8e22f },
|
||
- { .base_reg = OMAP_IH2_BASE, .trigger_map = 0xfdb9c1f2 },
|
||
- { .base_reg = OMAP_IH2_BASE + 0x100, .trigger_map = 0x800040f3 },
|
||
-};
|
||
-#endif
|
||
-
|
||
-#ifdef CONFIG_ARCH_OMAP850
|
||
-static struct omap_irq_bank omap850_irq_banks[] = {
|
||
+#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850)
|
||
+static struct omap_irq_bank omap7xx_irq_banks[] = {
|
||
{ .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3f8e22f },
|
||
{ .base_reg = OMAP_IH2_BASE, .trigger_map = 0xfdb9c1f2 },
|
||
{ .base_reg = OMAP_IH2_BASE + 0x100, .trigger_map = 0x800040f3 },
|
||
@@ -186,16 +178,10 @@ void __init omap_init_irq(void)
|
||
{
|
||
int i, j;
|
||
|
||
-#ifdef CONFIG_ARCH_OMAP730
|
||
- if (cpu_is_omap730()) {
|
||
- irq_banks = omap730_irq_banks;
|
||
- irq_bank_count = ARRAY_SIZE(omap730_irq_banks);
|
||
- }
|
||
-#endif
|
||
-#ifdef CONFIG_ARCH_OMAP850
|
||
- if (cpu_is_omap850()) {
|
||
- irq_banks = omap850_irq_banks;
|
||
- irq_bank_count = ARRAY_SIZE(omap850_irq_banks);
|
||
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
|
||
+ if (cpu_is_omap7xx()) {
|
||
+ irq_banks = omap7xx_irq_banks;
|
||
+ irq_bank_count = ARRAY_SIZE(omap7xx_irq_banks);
|
||
}
|
||
#endif
|
||
#ifdef CONFIG_ARCH_OMAP15XX
|
||
@@ -247,10 +233,8 @@ void __init omap_init_irq(void)
|
||
|
||
/* Unmask level 2 handler */
|
||
|
||
- if (cpu_is_omap730())
|
||
- omap_unmask_irq(INT_730_IH2_IRQ);
|
||
- else if (cpu_is_omap850())
|
||
- omap_unmask_irq(INT_850_IH2_IRQ);
|
||
+ if (cpu_is_omap7xx())
|
||
+ omap_unmask_irq(INT_7XX_IH2_IRQ);
|
||
else if (cpu_is_omap15xx())
|
||
omap_unmask_irq(INT_1510_IH2_IRQ);
|
||
else if (cpu_is_omap16xx())
|
||
diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
|
||
index 505d98c..3a51cb2 100644
|
||
--- a/arch/arm/mach-omap1/mcbsp.c
|
||
+++ b/arch/arm/mach-omap1/mcbsp.c
|
||
@@ -79,29 +79,29 @@ static struct omap_mcbsp_ops omap1_mcbsp_ops = {
|
||
.free = omap1_mcbsp_free,
|
||
};
|
||
|
||
-#ifdef CONFIG_ARCH_OMAP730
|
||
-static struct omap_mcbsp_platform_data omap730_mcbsp_pdata[] = {
|
||
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
|
||
+static struct omap_mcbsp_platform_data omap7xx_mcbsp_pdata[] = {
|
||
{
|
||
- .phys_base = OMAP730_MCBSP1_BASE,
|
||
+ .phys_base = OMAP7XX_MCBSP1_BASE,
|
||
.dma_rx_sync = OMAP_DMA_MCBSP1_RX,
|
||
.dma_tx_sync = OMAP_DMA_MCBSP1_TX,
|
||
- .rx_irq = INT_730_McBSP1RX,
|
||
- .tx_irq = INT_730_McBSP1TX,
|
||
+ .rx_irq = INT_7XX_McBSP1RX,
|
||
+ .tx_irq = INT_7XX_McBSP1TX,
|
||
.ops = &omap1_mcbsp_ops,
|
||
},
|
||
{
|
||
- .phys_base = OMAP730_MCBSP2_BASE,
|
||
+ .phys_base = OMAP7XX_MCBSP2_BASE,
|
||
.dma_rx_sync = OMAP_DMA_MCBSP3_RX,
|
||
.dma_tx_sync = OMAP_DMA_MCBSP3_TX,
|
||
- .rx_irq = INT_730_McBSP2RX,
|
||
- .tx_irq = INT_730_McBSP2TX,
|
||
+ .rx_irq = INT_7XX_McBSP2RX,
|
||
+ .tx_irq = INT_7XX_McBSP2TX,
|
||
.ops = &omap1_mcbsp_ops,
|
||
},
|
||
};
|
||
-#define OMAP730_MCBSP_PDATA_SZ ARRAY_SIZE(omap730_mcbsp_pdata)
|
||
+#define OMAP7XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap7xx_mcbsp_pdata)
|
||
#else
|
||
-#define omap730_mcbsp_pdata NULL
|
||
-#define OMAP730_MCBSP_PDATA_SZ 0
|
||
+#define omap7xx_mcbsp_pdata NULL
|
||
+#define OMAP7XX_MCBSP_PDATA_SZ 0
|
||
#endif
|
||
|
||
#ifdef CONFIG_ARCH_OMAP15XX
|
||
@@ -172,8 +172,8 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = {
|
||
|
||
int __init omap1_mcbsp_init(void)
|
||
{
|
||
- if (cpu_is_omap730())
|
||
- omap_mcbsp_count = OMAP730_MCBSP_PDATA_SZ;
|
||
+ if (cpu_is_omap7xx())
|
||
+ omap_mcbsp_count = OMAP7XX_MCBSP_PDATA_SZ;
|
||
if (cpu_is_omap15xx())
|
||
omap_mcbsp_count = OMAP15XX_MCBSP_PDATA_SZ;
|
||
if (cpu_is_omap16xx())
|
||
@@ -184,9 +184,9 @@ int __init omap1_mcbsp_init(void)
|
||
if (!mcbsp_ptr)
|
||
return -ENOMEM;
|
||
|
||
- if (cpu_is_omap730())
|
||
- omap_mcbsp_register_board_cfg(omap730_mcbsp_pdata,
|
||
- OMAP730_MCBSP_PDATA_SZ);
|
||
+ if (cpu_is_omap7xx())
|
||
+ omap_mcbsp_register_board_cfg(omap7xx_mcbsp_pdata,
|
||
+ OMAP7XX_MCBSP_PDATA_SZ);
|
||
|
||
if (cpu_is_omap15xx())
|
||
omap_mcbsp_register_board_cfg(omap15xx_mcbsp_pdata,
|
||
diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c
|
||
index 721e0d9..d59899d 100644
|
||
--- a/arch/arm/mach-omap1/mux.c
|
||
+++ b/arch/arm/mach-omap1/mux.c
|
||
@@ -35,47 +35,28 @@
|
||
|
||
static struct omap_mux_cfg arch_mux_cfg;
|
||
|
||
-#ifdef CONFIG_ARCH_OMAP730
|
||
-static struct pin_config __initdata_or_module omap730_pins[] = {
|
||
-MUX_CFG_730("E2_730_KBR0", 12, 21, 0, 20, 1, 0)
|
||
-MUX_CFG_730("J7_730_KBR1", 12, 25, 0, 24, 1, 0)
|
||
-MUX_CFG_730("E1_730_KBR2", 12, 29, 0, 28, 1, 0)
|
||
-MUX_CFG_730("F3_730_KBR3", 13, 1, 0, 0, 1, 0)
|
||
-MUX_CFG_730("D2_730_KBR4", 13, 5, 0, 4, 1, 0)
|
||
-MUX_CFG_730("C2_730_KBC0", 13, 9, 0, 8, 1, 0)
|
||
-MUX_CFG_730("D3_730_KBC1", 13, 13, 0, 12, 1, 0)
|
||
-MUX_CFG_730("E4_730_KBC2", 13, 17, 0, 16, 1, 0)
|
||
-MUX_CFG_730("F4_730_KBC3", 13, 21, 0, 20, 1, 0)
|
||
-MUX_CFG_730("E3_730_KBC4", 13, 25, 0, 24, 1, 0)
|
||
-
|
||
-MUX_CFG_730("AA17_730_USB_DM", 2, 21, 0, 20, 0, 0)
|
||
-MUX_CFG_730("W16_730_USB_PU_EN", 2, 25, 0, 24, 0, 0)
|
||
-MUX_CFG_730("W17_730_USB_VBUSI", 2, 29, 0, 28, 0, 0)
|
||
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
|
||
+static struct pin_config __initdata_or_module omap7xx_pins[] = {
|
||
+MUX_CFG_7XX("E2_7XX_KBR0", 12, 21, 0, 20, 1, 0)
|
||
+MUX_CFG_7XX("J7_7XX_KBR1", 12, 25, 0, 24, 1, 0)
|
||
+MUX_CFG_7XX("E1_7XX_KBR2", 12, 29, 0, 28, 1, 0)
|
||
+MUX_CFG_7XX("F3_7XX_KBR3", 13, 1, 0, 0, 1, 0)
|
||
+MUX_CFG_7XX("D2_7XX_KBR4", 13, 5, 0, 4, 1, 0)
|
||
+MUX_CFG_7XX("C2_7XX_KBC0", 13, 9, 0, 8, 1, 0)
|
||
+MUX_CFG_7XX("D3_7XX_KBC1", 13, 13, 0, 12, 1, 0)
|
||
+MUX_CFG_7XX("E4_7XX_KBC2", 13, 17, 0, 16, 1, 0)
|
||
+MUX_CFG_7XX("F4_7XX_KBC3", 13, 21, 0, 20, 1, 0)
|
||
+MUX_CFG_7XX("E3_7XX_KBC4", 13, 25, 0, 24, 1, 0)
|
||
+
|
||
+MUX_CFG_7XX("AA17_7XX_USB_DM", 2, 21, 0, 20, 0, 0)
|
||
+MUX_CFG_7XX("W16_7XX_USB_PU_EN", 2, 25, 0, 24, 0, 0)
|
||
+MUX_CFG_7XX("W17_7XX_USB_VBUSI", 2, 29, 0, 28, 0, 0)
|
||
};
|
||
-#define OMAP730_PINS_SZ ARRAY_SIZE(omap730_pins)
|
||
+#define OMAP7XX_PINS_SZ ARRAY_SIZE(omap7xx_pins)
|
||
#else
|
||
-#define omap730_pins NULL
|
||
-#define OMAP730_PINS_SZ 0
|
||
-#endif /* CONFIG_ARCH_OMAP730 */
|
||
-
|
||
-#ifdef CONFIG_ARCH_OMAP850
|
||
-struct pin_config __initdata_or_module omap850_pins[] = {
|
||
-MUX_CFG_850("E2_850_KBR0", 12, 21, 0, 20, 1, 0)
|
||
-MUX_CFG_850("J7_850_KBR1", 12, 25, 0, 24, 1, 0)
|
||
-MUX_CFG_850("E1_850_KBR2", 12, 29, 0, 28, 1, 0)
|
||
-MUX_CFG_850("F3_850_KBR3", 13, 1, 0, 0, 1, 0)
|
||
-MUX_CFG_850("D2_850_KBR4", 13, 5, 0, 4, 1, 0)
|
||
-MUX_CFG_850("C2_850_KBC0", 13, 9, 0, 8, 1, 0)
|
||
-MUX_CFG_850("D3_850_KBC1", 13, 13, 0, 12, 1, 0)
|
||
-MUX_CFG_850("E4_850_KBC2", 13, 17, 0, 16, 1, 0)
|
||
-MUX_CFG_850("F4_850_KBC3", 13, 21, 0, 20, 1, 0)
|
||
-MUX_CFG_850("E3_850_KBC4", 13, 25, 0, 24, 1, 0)
|
||
-
|
||
-MUX_CFG_850("AA17_850_USB_DM", 2, 21, 0, 20, 0, 0)
|
||
-MUX_CFG_850("W16_850_USB_PU_EN", 2, 25, 0, 24, 0, 0)
|
||
-MUX_CFG_850("W17_850_USB_VBUSI", 2, 29, 0, 28, 0, 0)
|
||
-};
|
||
-#endif
|
||
+#define omap7xx_pins NULL
|
||
+#define OMAP7XX_PINS_SZ 0
|
||
+#endif /* CONFIG_ARCH_OMAP730 || CONFIG_ARCH_OMAP850 */
|
||
|
||
#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX)
|
||
static struct pin_config __initdata_or_module omap1xxx_pins[] = {
|
||
@@ -438,11 +419,6 @@ int __init_or_module omap1_cfg_reg(const struct pin_config *cfg)
|
||
printk(" %s (0x%08x) = 0x%08x -> 0x%08x\n",
|
||
cfg->pull_name, cfg->pull_reg, pull_orig, pull);
|
||
}
|
||
-
|
||
-#ifdef CONFIG_ARCH_OMAP850
|
||
- omap_mux_register(omap850_pins, ARRAY_SIZE(omap850_pins));
|
||
-#endif
|
||
-
|
||
#endif
|
||
|
||
#ifdef CONFIG_OMAP_MUX_ERRORS
|
||
@@ -454,9 +430,9 @@ int __init_or_module omap1_cfg_reg(const struct pin_config *cfg)
|
||
|
||
int __init omap1_mux_init(void)
|
||
{
|
||
- if (cpu_is_omap730()) {
|
||
- arch_mux_cfg.pins = omap730_pins;
|
||
- arch_mux_cfg.size = OMAP730_PINS_SZ;
|
||
+ if (cpu_is_omap7xx()) {
|
||
+ arch_mux_cfg.pins = omap7xx_pins;
|
||
+ arch_mux_cfg.size = OMAP7XX_PINS_SZ;
|
||
arch_mux_cfg.cfg_reg = omap1_cfg_reg;
|
||
}
|
||
|
||
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
|
||
index 5218943..10f4e4a 100644
|
||
--- a/arch/arm/mach-omap1/pm.c
|
||
+++ b/arch/arm/mach-omap1/pm.c
|
||
@@ -62,7 +62,7 @@
|
||
static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE];
|
||
static unsigned short dsp_sleep_save[DSP_SLEEP_SAVE_SIZE];
|
||
static unsigned short ulpd_sleep_save[ULPD_SLEEP_SAVE_SIZE];
|
||
-static unsigned int mpui730_sleep_save[MPUI730_SLEEP_SAVE_SIZE];
|
||
+static unsigned int mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_SIZE];
|
||
static unsigned int mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_SIZE];
|
||
static unsigned int mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_SIZE];
|
||
|
||
@@ -183,9 +183,9 @@ static void omap_pm_wakeup_setup(void)
|
||
* drivers must still separately call omap_set_gpio_wakeup() to
|
||
* wake up to a GPIO interrupt.
|
||
*/
|
||
- if (cpu_is_omap730())
|
||
- level1_wake = OMAP_IRQ_BIT(INT_730_GPIO_BANK1) |
|
||
- OMAP_IRQ_BIT(INT_730_IH2_IRQ);
|
||
+ if (cpu_is_omap7xx())
|
||
+ level1_wake = OMAP_IRQ_BIT(INT_7XX_GPIO_BANK1) |
|
||
+ OMAP_IRQ_BIT(INT_7XX_IH2_IRQ);
|
||
else if (cpu_is_omap15xx())
|
||
level1_wake = OMAP_IRQ_BIT(INT_GPIO_BANK1) |
|
||
OMAP_IRQ_BIT(INT_1510_IH2_IRQ);
|
||
@@ -195,10 +195,10 @@ static void omap_pm_wakeup_setup(void)
|
||
|
||
omap_writel(~level1_wake, OMAP_IH1_MIR);
|
||
|
||
- if (cpu_is_omap730()) {
|
||
+ if (cpu_is_omap7xx()) {
|
||
omap_writel(~level2_wake, OMAP_IH2_0_MIR);
|
||
- omap_writel(~(OMAP_IRQ_BIT(INT_730_WAKE_UP_REQ) |
|
||
- OMAP_IRQ_BIT(INT_730_MPUIO_KEYPAD)),
|
||
+ omap_writel(~(OMAP_IRQ_BIT(INT_7XX_WAKE_UP_REQ) |
|
||
+ OMAP_IRQ_BIT(INT_7XX_MPUIO_KEYPAD)),
|
||
OMAP_IH2_1_MIR);
|
||
} else if (cpu_is_omap15xx()) {
|
||
level2_wake |= OMAP_IRQ_BIT(INT_KEYBOARD);
|
||
@@ -253,15 +253,15 @@ void omap1_pm_suspend(void)
|
||
* Save interrupt, MPUI, ARM and UPLD control registers.
|
||
*/
|
||
|
||
- if (cpu_is_omap730()) {
|
||
- MPUI730_SAVE(OMAP_IH1_MIR);
|
||
- MPUI730_SAVE(OMAP_IH2_0_MIR);
|
||
- MPUI730_SAVE(OMAP_IH2_1_MIR);
|
||
- MPUI730_SAVE(MPUI_CTRL);
|
||
- MPUI730_SAVE(MPUI_DSP_BOOT_CONFIG);
|
||
- MPUI730_SAVE(MPUI_DSP_API_CONFIG);
|
||
- MPUI730_SAVE(EMIFS_CONFIG);
|
||
- MPUI730_SAVE(EMIFF_SDRAM_CONFIG);
|
||
+ if (cpu_is_omap7xx()) {
|
||
+ MPUI7XX_SAVE(OMAP_IH1_MIR);
|
||
+ MPUI7XX_SAVE(OMAP_IH2_0_MIR);
|
||
+ MPUI7XX_SAVE(OMAP_IH2_1_MIR);
|
||
+ MPUI7XX_SAVE(MPUI_CTRL);
|
||
+ MPUI7XX_SAVE(MPUI_DSP_BOOT_CONFIG);
|
||
+ MPUI7XX_SAVE(MPUI_DSP_API_CONFIG);
|
||
+ MPUI7XX_SAVE(EMIFS_CONFIG);
|
||
+ MPUI7XX_SAVE(EMIFF_SDRAM_CONFIG);
|
||
|
||
} else if (cpu_is_omap15xx()) {
|
||
MPUI1510_SAVE(OMAP_IH1_MIR);
|
||
@@ -306,7 +306,7 @@ void omap1_pm_suspend(void)
|
||
omap_writew(omap_readw(ARM_RSTCT1) & ~(1 << DSP_EN), ARM_RSTCT1);
|
||
|
||
/* shut down dsp_ck */
|
||
- if (!cpu_is_omap730())
|
||
+ if (!cpu_is_omap7xx())
|
||
omap_writew(omap_readw(ARM_CKCTL) & ~(1 << EN_DSPCK), ARM_CKCTL);
|
||
|
||
/* temporarily enabling api_ck to access DSP registers */
|
||
@@ -383,12 +383,12 @@ void omap1_pm_suspend(void)
|
||
ULPD_RESTORE(ULPD_CLOCK_CTRL);
|
||
ULPD_RESTORE(ULPD_STATUS_REQ);
|
||
|
||
- if (cpu_is_omap730()) {
|
||
- MPUI730_RESTORE(EMIFS_CONFIG);
|
||
- MPUI730_RESTORE(EMIFF_SDRAM_CONFIG);
|
||
- MPUI730_RESTORE(OMAP_IH1_MIR);
|
||
- MPUI730_RESTORE(OMAP_IH2_0_MIR);
|
||
- MPUI730_RESTORE(OMAP_IH2_1_MIR);
|
||
+ if (cpu_is_omap7xx()) {
|
||
+ MPUI7XX_RESTORE(EMIFS_CONFIG);
|
||
+ MPUI7XX_RESTORE(EMIFF_SDRAM_CONFIG);
|
||
+ MPUI7XX_RESTORE(OMAP_IH1_MIR);
|
||
+ MPUI7XX_RESTORE(OMAP_IH2_0_MIR);
|
||
+ MPUI7XX_RESTORE(OMAP_IH2_1_MIR);
|
||
} else if (cpu_is_omap15xx()) {
|
||
MPUI1510_RESTORE(MPUI_CTRL);
|
||
MPUI1510_RESTORE(MPUI_DSP_BOOT_CONFIG);
|
||
@@ -461,13 +461,13 @@ static int omap_pm_read_proc(
|
||
ULPD_SAVE(ULPD_DPLL_CTRL);
|
||
ULPD_SAVE(ULPD_POWER_CTRL);
|
||
|
||
- if (cpu_is_omap730()) {
|
||
- MPUI730_SAVE(MPUI_CTRL);
|
||
- MPUI730_SAVE(MPUI_DSP_STATUS);
|
||
- MPUI730_SAVE(MPUI_DSP_BOOT_CONFIG);
|
||
- MPUI730_SAVE(MPUI_DSP_API_CONFIG);
|
||
- MPUI730_SAVE(EMIFF_SDRAM_CONFIG);
|
||
- MPUI730_SAVE(EMIFS_CONFIG);
|
||
+ if (cpu_is_omap7xx()) {
|
||
+ MPUI7XX_SAVE(MPUI_CTRL);
|
||
+ MPUI7XX_SAVE(MPUI_DSP_STATUS);
|
||
+ MPUI7XX_SAVE(MPUI_DSP_BOOT_CONFIG);
|
||
+ MPUI7XX_SAVE(MPUI_DSP_API_CONFIG);
|
||
+ MPUI7XX_SAVE(EMIFF_SDRAM_CONFIG);
|
||
+ MPUI7XX_SAVE(EMIFS_CONFIG);
|
||
} else if (cpu_is_omap15xx()) {
|
||
MPUI1510_SAVE(MPUI_CTRL);
|
||
MPUI1510_SAVE(MPUI_DSP_STATUS);
|
||
@@ -517,20 +517,20 @@ static int omap_pm_read_proc(
|
||
ULPD_SHOW(ULPD_STATUS_REQ),
|
||
ULPD_SHOW(ULPD_POWER_CTRL));
|
||
|
||
- if (cpu_is_omap730()) {
|
||
+ if (cpu_is_omap7xx()) {
|
||
my_buffer_offset += sprintf(my_base + my_buffer_offset,
|
||
- "MPUI730_CTRL_REG 0x%-8x \n"
|
||
- "MPUI730_DSP_STATUS_REG: 0x%-8x \n"
|
||
- "MPUI730_DSP_BOOT_CONFIG_REG: 0x%-8x \n"
|
||
- "MPUI730_DSP_API_CONFIG_REG: 0x%-8x \n"
|
||
- "MPUI730_SDRAM_CONFIG_REG: 0x%-8x \n"
|
||
- "MPUI730_EMIFS_CONFIG_REG: 0x%-8x \n",
|
||
- MPUI730_SHOW(MPUI_CTRL),
|
||
- MPUI730_SHOW(MPUI_DSP_STATUS),
|
||
- MPUI730_SHOW(MPUI_DSP_BOOT_CONFIG),
|
||
- MPUI730_SHOW(MPUI_DSP_API_CONFIG),
|
||
- MPUI730_SHOW(EMIFF_SDRAM_CONFIG),
|
||
- MPUI730_SHOW(EMIFS_CONFIG));
|
||
+ "MPUI7XX_CTRL_REG 0x%-8x \n"
|
||
+ "MPUI7XX_DSP_STATUS_REG: 0x%-8x \n"
|
||
+ "MPUI7XX_DSP_BOOT_CONFIG_REG: 0x%-8x \n"
|
||
+ "MPUI7XX_DSP_API_CONFIG_REG: 0x%-8x \n"
|
||
+ "MPUI7XX_SDRAM_CONFIG_REG: 0x%-8x \n"
|
||
+ "MPUI7XX_EMIFS_CONFIG_REG: 0x%-8x \n",
|
||
+ MPUI7XX_SHOW(MPUI_CTRL),
|
||
+ MPUI7XX_SHOW(MPUI_DSP_STATUS),
|
||
+ MPUI7XX_SHOW(MPUI_DSP_BOOT_CONFIG),
|
||
+ MPUI7XX_SHOW(MPUI_DSP_API_CONFIG),
|
||
+ MPUI7XX_SHOW(EMIFF_SDRAM_CONFIG),
|
||
+ MPUI7XX_SHOW(EMIFS_CONFIG));
|
||
} else if (cpu_is_omap15xx()) {
|
||
my_buffer_offset += sprintf(my_base + my_buffer_offset,
|
||
"MPUI1510_CTRL_REG 0x%-8x \n"
|
||
@@ -668,9 +668,9 @@ static int __init omap_pm_init(void)
|
||
* These routines need to be in SRAM as that's the only
|
||
* memory the MPU can see when it wakes up.
|
||
*/
|
||
- if (cpu_is_omap730()) {
|
||
- omap_sram_suspend = omap_sram_push(omap730_cpu_suspend,
|
||
- omap730_cpu_suspend_sz);
|
||
+ if (cpu_is_omap7xx()) {
|
||
+ omap_sram_suspend = omap_sram_push(omap7xx_cpu_suspend,
|
||
+ omap7xx_cpu_suspend_sz);
|
||
} else if (cpu_is_omap15xx()) {
|
||
omap_sram_suspend = omap_sram_push(omap1510_cpu_suspend,
|
||
omap1510_cpu_suspend_sz);
|
||
@@ -686,8 +686,8 @@ static int __init omap_pm_init(void)
|
||
|
||
pm_idle = omap1_pm_idle;
|
||
|
||
- if (cpu_is_omap730())
|
||
- setup_irq(INT_730_WAKE_UP_REQ, &omap_wakeup_irq);
|
||
+ if (cpu_is_omap7xx())
|
||
+ setup_irq(INT_7XX_WAKE_UP_REQ, &omap_wakeup_irq);
|
||
else if (cpu_is_omap16xx())
|
||
setup_irq(INT_1610_WAKE_UP_REQ, &omap_wakeup_irq);
|
||
|
||
@@ -700,8 +700,8 @@ static int __init omap_pm_init(void)
|
||
omap_writew(ULPD_POWER_CTRL_REG_VAL, ULPD_POWER_CTRL);
|
||
|
||
/* Configure IDLECT3 */
|
||
- if (cpu_is_omap730())
|
||
- omap_writel(OMAP730_IDLECT3_VAL, OMAP730_IDLECT3);
|
||
+ if (cpu_is_omap7xx())
|
||
+ omap_writel(OMAP7XX_IDLECT3_VAL, OMAP7XX_IDLECT3);
|
||
else if (cpu_is_omap16xx())
|
||
omap_writel(OMAP1610_IDLECT3_VAL, OMAP1610_IDLECT3);
|
||
|
||
diff --git a/arch/arm/mach-omap1/pm.h b/arch/arm/mach-omap1/pm.h
|
||
index c4f05bd..56a6479 100644
|
||
--- a/arch/arm/mach-omap1/pm.h
|
||
+++ b/arch/arm/mach-omap1/pm.h
|
||
@@ -98,13 +98,14 @@
|
||
#define OMAP1610_IDLECT3 0xfffece24
|
||
#define OMAP1610_IDLE_LOOP_REQUEST 0x0400
|
||
|
||
-#define OMAP730_IDLECT1_SLEEP_VAL 0x16c7
|
||
-#define OMAP730_IDLECT2_SLEEP_VAL 0x09c7
|
||
-#define OMAP730_IDLECT3_VAL 0x3f
|
||
-#define OMAP730_IDLECT3 0xfffece24
|
||
-#define OMAP730_IDLE_LOOP_REQUEST 0x0C00
|
||
+#define OMAP7XX_IDLECT1_SLEEP_VAL 0x16c7
|
||
+#define OMAP7XX_IDLECT2_SLEEP_VAL 0x09c7
|
||
+#define OMAP7XX_IDLECT3_VAL 0x3f
|
||
+#define OMAP7XX_IDLECT3 0xfffece24
|
||
+#define OMAP7XX_IDLE_LOOP_REQUEST 0x0C00
|
||
|
||
#if !defined(CONFIG_ARCH_OMAP730) && \
|
||
+ !defined(CONFIG_ARCH_OMAP850) && \
|
||
!defined(CONFIG_ARCH_OMAP15XX) && \
|
||
!defined(CONFIG_ARCH_OMAP16XX)
|
||
#warning "Power management for this processor not implemented yet"
|
||
@@ -122,17 +123,17 @@ extern void allow_idle_sleep(void);
|
||
extern void omap1_pm_idle(void);
|
||
extern void omap1_pm_suspend(void);
|
||
|
||
-extern void omap730_cpu_suspend(unsigned short, unsigned short);
|
||
+extern void omap7xx_cpu_suspend(unsigned short, unsigned short);
|
||
extern void omap1510_cpu_suspend(unsigned short, unsigned short);
|
||
extern void omap1610_cpu_suspend(unsigned short, unsigned short);
|
||
-extern void omap730_idle_loop_suspend(void);
|
||
+extern void omap7xx_idle_loop_suspend(void);
|
||
extern void omap1510_idle_loop_suspend(void);
|
||
extern void omap1610_idle_loop_suspend(void);
|
||
|
||
-extern unsigned int omap730_cpu_suspend_sz;
|
||
+extern unsigned int omap7xx_cpu_suspend_sz;
|
||
extern unsigned int omap1510_cpu_suspend_sz;
|
||
extern unsigned int omap1610_cpu_suspend_sz;
|
||
-extern unsigned int omap730_idle_loop_suspend_sz;
|
||
+extern unsigned int omap7xx_idle_loop_suspend_sz;
|
||
extern unsigned int omap1510_idle_loop_suspend_sz;
|
||
extern unsigned int omap1610_idle_loop_suspend_sz;
|
||
|
||
@@ -155,9 +156,9 @@ extern void omap_serial_wake_trigger(int enable);
|
||
#define ULPD_RESTORE(x) omap_writew((ulpd_sleep_save[ULPD_SLEEP_SAVE_##x]), (x))
|
||
#define ULPD_SHOW(x) ulpd_sleep_save[ULPD_SLEEP_SAVE_##x]
|
||
|
||
-#define MPUI730_SAVE(x) mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x] = omap_readl(x)
|
||
-#define MPUI730_RESTORE(x) omap_writel((mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x]), (x))
|
||
-#define MPUI730_SHOW(x) mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x]
|
||
+#define MPUI7XX_SAVE(x) mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_##x] = omap_readl(x)
|
||
+#define MPUI7XX_RESTORE(x) omap_writel((mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_##x]), (x))
|
||
+#define MPUI7XX_SHOW(x) mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_##x]
|
||
|
||
#define MPUI1510_SAVE(x) mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x] = omap_readl(x)
|
||
#define MPUI1510_RESTORE(x) omap_writel((mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x]), (x))
|
||
@@ -232,24 +233,24 @@ enum mpui1510_save_state {
|
||
#endif
|
||
};
|
||
|
||
-enum mpui730_save_state {
|
||
- MPUI730_SLEEP_SAVE_START = 0,
|
||
+enum mpui7xx_save_state {
|
||
+ MPUI7XX_SLEEP_SAVE_START = 0,
|
||
/*
|
||
* MPUI registers 32 bits
|
||
*/
|
||
- MPUI730_SLEEP_SAVE_MPUI_CTRL,
|
||
- MPUI730_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG,
|
||
- MPUI730_SLEEP_SAVE_MPUI_DSP_API_CONFIG,
|
||
- MPUI730_SLEEP_SAVE_MPUI_DSP_STATUS,
|
||
- MPUI730_SLEEP_SAVE_EMIFF_SDRAM_CONFIG,
|
||
- MPUI730_SLEEP_SAVE_EMIFS_CONFIG,
|
||
- MPUI730_SLEEP_SAVE_OMAP_IH1_MIR,
|
||
- MPUI730_SLEEP_SAVE_OMAP_IH2_0_MIR,
|
||
- MPUI730_SLEEP_SAVE_OMAP_IH2_1_MIR,
|
||
-#if defined(CONFIG_ARCH_OMAP730)
|
||
- MPUI730_SLEEP_SAVE_SIZE
|
||
+ MPUI7XX_SLEEP_SAVE_MPUI_CTRL,
|
||
+ MPUI7XX_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG,
|
||
+ MPUI7XX_SLEEP_SAVE_MPUI_DSP_API_CONFIG,
|
||
+ MPUI7XX_SLEEP_SAVE_MPUI_DSP_STATUS,
|
||
+ MPUI7XX_SLEEP_SAVE_EMIFF_SDRAM_CONFIG,
|
||
+ MPUI7XX_SLEEP_SAVE_EMIFS_CONFIG,
|
||
+ MPUI7XX_SLEEP_SAVE_OMAP_IH1_MIR,
|
||
+ MPUI7XX_SLEEP_SAVE_OMAP_IH2_0_MIR,
|
||
+ MPUI7XX_SLEEP_SAVE_OMAP_IH2_1_MIR,
|
||
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
|
||
+ MPUI7XX_SLEEP_SAVE_SIZE
|
||
#else
|
||
- MPUI730_SLEEP_SAVE_SIZE = 0
|
||
+ MPUI7XX_SLEEP_SAVE_SIZE = 0
|
||
#endif
|
||
};
|
||
|
||
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
|
||
index d496e50..332c516 100644
|
||
--- a/arch/arm/mach-omap1/serial.c
|
||
+++ b/arch/arm/mach-omap1/serial.c
|
||
@@ -64,7 +64,6 @@ static void __init omap_serial_reset(struct plat_serial8250_port *p)
|
||
|
||
static struct plat_serial8250_port serial_platform_data[] = {
|
||
{
|
||
- .membase = OMAP1_IO_ADDRESS(OMAP_UART1_BASE),
|
||
.mapbase = OMAP_UART1_BASE,
|
||
.irq = INT_UART1,
|
||
.flags = UPF_BOOT_AUTOCONF,
|
||
@@ -73,7 +72,6 @@ static struct plat_serial8250_port serial_platform_data[] = {
|
||
.uartclk = OMAP16XX_BASE_BAUD * 16,
|
||
},
|
||
{
|
||
- .membase = OMAP1_IO_ADDRESS(OMAP_UART2_BASE),
|
||
.mapbase = OMAP_UART2_BASE,
|
||
.irq = INT_UART2,
|
||
.flags = UPF_BOOT_AUTOCONF,
|
||
@@ -82,7 +80,6 @@ static struct plat_serial8250_port serial_platform_data[] = {
|
||
.uartclk = OMAP16XX_BASE_BAUD * 16,
|
||
},
|
||
{
|
||
- .membase = OMAP1_IO_ADDRESS(OMAP_UART3_BASE),
|
||
.mapbase = OMAP_UART3_BASE,
|
||
.irq = INT_UART3,
|
||
.flags = UPF_BOOT_AUTOCONF,
|
||
@@ -90,7 +87,6 @@ static struct plat_serial8250_port serial_platform_data[] = {
|
||
.regshift = 2,
|
||
.uartclk = OMAP16XX_BASE_BAUD * 16,
|
||
},
|
||
- { },
|
||
};
|
||
|
||
static struct platform_device serial_device = {
|
||
@@ -110,18 +106,11 @@ void __init omap_serial_init(void)
|
||
{
|
||
int i;
|
||
|
||
- if (cpu_is_omap730()) {
|
||
+ if (cpu_is_omap7xx()) {
|
||
serial_platform_data[0].regshift = 0;
|
||
serial_platform_data[1].regshift = 0;
|
||
- serial_platform_data[0].irq = INT_730_UART_MODEM_1;
|
||
- serial_platform_data[1].irq = INT_730_UART_MODEM_IRDA_2;
|
||
- }
|
||
-
|
||
- if (cpu_is_omap850()) {
|
||
- serial_platform_data[0].regshift = 0;
|
||
- serial_platform_data[1].regshift = 0;
|
||
- serial_platform_data[0].irq = INT_850_UART_MODEM_1;
|
||
- serial_platform_data[1].irq = INT_850_UART_MODEM_IRDA_2;
|
||
+ serial_platform_data[0].irq = INT_7XX_UART_MODEM_1;
|
||
+ serial_platform_data[1].irq = INT_7XX_UART_MODEM_IRDA_2;
|
||
}
|
||
|
||
if (cpu_is_omap15xx()) {
|
||
@@ -130,9 +119,17 @@ void __init omap_serial_init(void)
|
||
serial_platform_data[2].uartclk = OMAP1510_BASE_BAUD * 16;
|
||
}
|
||
|
||
- for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
|
||
+ for (i = 0; i < ARRAY_SIZE(serial_platform_data); i++) {
|
||
unsigned char reg;
|
||
|
||
+ /* Static mapping, never released */
|
||
+ serial_platform_data[i].membase =
|
||
+ ioremap(serial_platform_data[i].mapbase, SZ_2K);
|
||
+ if (!serial_platform_data[i].membase) {
|
||
+ printk(KERN_ERR "Could not ioremap uart%i\n", i);
|
||
+ continue;
|
||
+ }
|
||
+
|
||
switch (i) {
|
||
case 0:
|
||
uart1_ck = clk_get(NULL, "uart1_ck");
|
||
diff --git a/arch/arm/mach-omap1/sleep.S b/arch/arm/mach-omap1/sleep.S
|
||
index 22e8568..ef771ce 100644
|
||
--- a/arch/arm/mach-omap1/sleep.S
|
||
+++ b/arch/arm/mach-omap1/sleep.S
|
||
@@ -1,7 +1,7 @@
|
||
/*
|
||
* linux/arch/arm/mach-omap1/sleep.S
|
||
*
|
||
- * Low-level OMAP730/1510/1610 sleep/wakeUp support
|
||
+ * Low-level OMAP7XX/1510/1610 sleep/wakeUp support
|
||
*
|
||
* Initial SA1110 code:
|
||
* Copyright (c) 2001 Cliff Brake <cbrake@accelent.com>
|
||
@@ -57,8 +57,8 @@
|
||
*
|
||
*/
|
||
|
||
-#if defined(CONFIG_ARCH_OMAP730)
|
||
-ENTRY(omap730_cpu_suspend)
|
||
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
|
||
+ENTRY(omap7xx_cpu_suspend)
|
||
|
||
@ save registers on stack
|
||
stmfd sp!, {r0 - r12, lr}
|
||
@@ -91,13 +91,13 @@ ENTRY(omap730_cpu_suspend)
|
||
|
||
@ turn off clock domains
|
||
@ do not disable PERCK (0x04)
|
||
- mov r5, #OMAP730_IDLECT2_SLEEP_VAL & 0xff
|
||
- orr r5, r5, #OMAP730_IDLECT2_SLEEP_VAL & 0xff00
|
||
+ mov r5, #OMAP7XX_IDLECT2_SLEEP_VAL & 0xff
|
||
+ orr r5, r5, #OMAP7XX_IDLECT2_SLEEP_VAL & 0xff00
|
||
strh r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
|
||
|
||
@ request ARM idle
|
||
- mov r3, #OMAP730_IDLECT1_SLEEP_VAL & 0xff
|
||
- orr r3, r3, #OMAP730_IDLECT1_SLEEP_VAL & 0xff00
|
||
+ mov r3, #OMAP7XX_IDLECT1_SLEEP_VAL & 0xff
|
||
+ orr r3, r3, #OMAP7XX_IDLECT1_SLEEP_VAL & 0xff00
|
||
strh r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
|
||
|
||
@ disable instruction cache
|
||
@@ -113,7 +113,7 @@ ENTRY(omap730_cpu_suspend)
|
||
mov r2, #0
|
||
mcr p15, 0, r2, c7, c0, 4 @ wait for interrupt
|
||
/*
|
||
- * omap730_cpu_suspend()'s resume point.
|
||
+ * omap7xx_cpu_suspend()'s resume point.
|
||
*
|
||
* It will just start executing here, so we'll restore stuff from the
|
||
* stack.
|
||
@@ -132,9 +132,9 @@ ENTRY(omap730_cpu_suspend)
|
||
@ restore regs and return
|
||
ldmfd sp!, {r0 - r12, pc}
|
||
|
||
-ENTRY(omap730_cpu_suspend_sz)
|
||
- .word . - omap730_cpu_suspend
|
||
-#endif /* CONFIG_ARCH_OMAP730 */
|
||
+ENTRY(omap7xx_cpu_suspend_sz)
|
||
+ .word . - omap7xx_cpu_suspend
|
||
+#endif /* CONFIG_ARCH_OMAP730 || CONFIG_ARCH_OMAP850 */
|
||
|
||
#ifdef CONFIG_ARCH_OMAP15XX
|
||
ENTRY(omap1510_cpu_suspend)
|
||
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
|
||
index 8cb1677..6b7702f 100644
|
||
--- a/arch/arm/mach-omap2/Makefile
|
||
+++ b/arch/arm/mach-omap2/Makefile
|
||
@@ -80,6 +80,7 @@ obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o
|
||
# Platform specific device init code
|
||
obj-y += usb-musb.o
|
||
obj-$(CONFIG_MACH_OMAP2_TUSB6010) += usb-tusb6010.o
|
||
+obj-y += usb-ehci.o
|
||
|
||
onenand-$(CONFIG_MTD_ONENAND_OMAP2) := gpmc-onenand.o
|
||
obj-y += $(onenand-m) $(onenand-y)
|
||
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
|
||
index 42217b3..e032a33 100644
|
||
--- a/arch/arm/mach-omap2/board-2430sdp.c
|
||
+++ b/arch/arm/mach-omap2/board-2430sdp.c
|
||
@@ -221,7 +221,7 @@ static void __init omap_2430sdp_map_io(void)
|
||
MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board")
|
||
/* Maintainer: Syed Khasim - Texas Instruments Inc */
|
||
.phys_io = 0x48000000,
|
||
- .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
|
||
+ .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
|
||
.boot_params = 0x80000100,
|
||
.map_io = omap_2430sdp_map_io,
|
||
.init_irq = omap_2430sdp_init_irq,
|
||
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
|
||
index efaf053..81aabac 100644
|
||
--- a/arch/arm/mach-omap2/board-3430sdp.c
|
||
+++ b/arch/arm/mach-omap2/board-3430sdp.c
|
||
@@ -484,6 +484,18 @@ static void enable_board_wakeup_source(void)
|
||
omap_cfg_reg(AF26_34XX_SYS_NIRQ); /* T2 interrupt line (keypad) */
|
||
}
|
||
|
||
+static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
|
||
+
|
||
+ .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
|
||
+ .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
|
||
+ .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
|
||
+
|
||
+ .phy_reset = true,
|
||
+ .reset_gpio_port[0] = 57,
|
||
+ .reset_gpio_port[1] = 61,
|
||
+ .reset_gpio_port[2] = -EINVAL
|
||
+};
|
||
+
|
||
static void __init omap_3430sdp_init(void)
|
||
{
|
||
omap3430_i2c_init();
|
||
@@ -500,6 +512,7 @@ static void __init omap_3430sdp_init(void)
|
||
usb_musb_init();
|
||
board_smc91x_init();
|
||
enable_board_wakeup_source();
|
||
+ usb_ehci_init(&ehci_pdata);
|
||
}
|
||
|
||
static void __init omap_3430sdp_map_io(void)
|
||
@@ -511,7 +524,7 @@ static void __init omap_3430sdp_map_io(void)
|
||
MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board")
|
||
/* Maintainer: Syed Khasim - Texas Instruments Inc */
|
||
.phys_io = 0x48000000,
|
||
- .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
|
||
+ .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
|
||
.boot_params = 0x80000100,
|
||
.map_io = omap_3430sdp_map_io,
|
||
.init_irq = omap_3430sdp_init_irq,
|
||
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
|
||
index eb37c40..50a62f2 100644
|
||
--- a/arch/arm/mach-omap2/board-4430sdp.c
|
||
+++ b/arch/arm/mach-omap2/board-4430sdp.c
|
||
@@ -52,8 +52,17 @@ static struct omap_board_config_kernel sdp4430_config[] __initdata = {
|
||
|
||
static void __init gic_init_irq(void)
|
||
{
|
||
- gic_dist_init(0, OMAP2_IO_ADDRESS(OMAP44XX_GIC_DIST_BASE), 29);
|
||
- gic_cpu_init(0, OMAP2_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE));
|
||
+ void __iomem *base;
|
||
+
|
||
+ /* Static mapping, never released */
|
||
+ base = ioremap(OMAP44XX_GIC_DIST_BASE, SZ_4K);
|
||
+ BUG_ON(!base);
|
||
+ gic_dist_init(0, base, 29);
|
||
+
|
||
+ /* Static mapping, never released */
|
||
+ base = ioremap(OMAP44XX_GIC_CPU_BASE, SZ_256);
|
||
+ BUG_ON(!base);
|
||
+ gic_cpu_init(0, OMAP44XX_GIC_CPU_BASE);
|
||
}
|
||
|
||
static void __init omap_4430sdp_init_irq(void)
|
||
@@ -84,7 +93,7 @@ static void __init omap_4430sdp_map_io(void)
|
||
MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board")
|
||
/* Maintainer: Santosh Shilimkar - Texas Instruments Inc */
|
||
.phys_io = 0x48000000,
|
||
- .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
|
||
+ .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
|
||
.boot_params = 0x80000100,
|
||
.map_io = omap_4430sdp_map_io,
|
||
.init_irq = omap_4430sdp_init_irq,
|
||
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
|
||
index a113228..e8a0e56 100644
|
||
--- a/arch/arm/mach-omap2/board-apollon.c
|
||
+++ b/arch/arm/mach-omap2/board-apollon.c
|
||
@@ -333,7 +333,7 @@ static void __init omap_apollon_map_io(void)
|
||
MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon")
|
||
/* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
|
||
.phys_io = 0x48000000,
|
||
- .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
|
||
+ .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
|
||
.boot_params = 0x80000100,
|
||
.map_io = omap_apollon_map_io,
|
||
.init_irq = omap_apollon_init_irq,
|
||
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
|
||
index 2e09a1c..1a139c0 100644
|
||
--- a/arch/arm/mach-omap2/board-generic.c
|
||
+++ b/arch/arm/mach-omap2/board-generic.c
|
||
@@ -56,7 +56,7 @@ static void __init omap_generic_map_io(void)
|
||
MACHINE_START(OMAP_GENERIC, "Generic OMAP24xx")
|
||
/* Maintainer: Paul Mundt <paul.mundt@nokia.com> */
|
||
.phys_io = 0x48000000,
|
||
- .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
|
||
+ .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
|
||
.boot_params = 0x80000100,
|
||
.map_io = omap_generic_map_io,
|
||
.init_irq = omap_generic_init_irq,
|
||
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
|
||
index eaa02d0..86f78f3 100644
|
||
--- a/arch/arm/mach-omap2/board-h4.c
|
||
+++ b/arch/arm/mach-omap2/board-h4.c
|
||
@@ -376,7 +376,7 @@ static void __init omap_h4_map_io(void)
|
||
MACHINE_START(OMAP_H4, "OMAP2420 H4 board")
|
||
/* Maintainer: Paul Mundt <paul.mundt@nokia.com> */
|
||
.phys_io = 0x48000000,
|
||
- .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
|
||
+ .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
|
||
.boot_params = 0x80000100,
|
||
.map_io = omap_h4_map_io,
|
||
.init_irq = omap_h4_init_irq,
|
||
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
|
||
index d110a7f..4ccc01a 100644
|
||
--- a/arch/arm/mach-omap2/board-ldp.c
|
||
+++ b/arch/arm/mach-omap2/board-ldp.c
|
||
@@ -399,7 +399,7 @@ static void __init omap_ldp_map_io(void)
|
||
|
||
MACHINE_START(OMAP_LDP, "OMAP LDP board")
|
||
.phys_io = 0x48000000,
|
||
- .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
|
||
+ .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
|
||
.boot_params = 0x80000100,
|
||
.map_io = omap_ldp_map_io,
|
||
.init_irq = omap_ldp_init_irq,
|
||
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
|
||
index 8341632..2f6ccba 100644
|
||
--- a/arch/arm/mach-omap2/board-n8x0.c
|
||
+++ b/arch/arm/mach-omap2/board-n8x0.c
|
||
@@ -121,7 +121,7 @@ static void __init n8x0_init_machine(void)
|
||
|
||
MACHINE_START(NOKIA_N800, "Nokia N800")
|
||
.phys_io = 0x48000000,
|
||
- .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
|
||
+ .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
|
||
.boot_params = 0x80000100,
|
||
.map_io = n8x0_map_io,
|
||
.init_irq = n8x0_init_irq,
|
||
@@ -131,7 +131,7 @@ MACHINE_END
|
||
|
||
MACHINE_START(NOKIA_N810, "Nokia N810")
|
||
.phys_io = 0x48000000,
|
||
- .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
|
||
+ .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
|
||
.boot_params = 0x80000100,
|
||
.map_io = n8x0_map_io,
|
||
.init_irq = n8x0_init_irq,
|
||
@@ -141,7 +141,7 @@ MACHINE_END
|
||
|
||
MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX")
|
||
.phys_io = 0x48000000,
|
||
- .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
|
||
+ .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
|
||
.boot_params = 0x80000100,
|
||
.map_io = n8x0_map_io,
|
||
.init_irq = n8x0_init_irq,
|
||
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
|
||
index 70df6b4..9824073 100644
|
||
--- a/arch/arm/mach-omap2/board-omap3beagle.c
|
||
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
|
||
@@ -400,6 +400,18 @@ static void __init omap3beagle_flash_init(void)
|
||
}
|
||
}
|
||
|
||
+static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
|
||
+
|
||
+ .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
|
||
+ .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
|
||
+ .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
|
||
+
|
||
+ .phy_reset = true,
|
||
+ .reset_gpio_port[0] = -EINVAL,
|
||
+ .reset_gpio_port[1] = 147,
|
||
+ .reset_gpio_port[2] = -EINVAL
|
||
+};
|
||
+
|
||
static void __init omap3_beagle_init(void)
|
||
{
|
||
omap3_beagle_i2c_init();
|
||
@@ -413,6 +425,7 @@ static void __init omap3_beagle_init(void)
|
||
gpio_direction_output(170, true);
|
||
|
||
usb_musb_init();
|
||
+ usb_ehci_init(&ehci_pdata);
|
||
omap3beagle_flash_init();
|
||
|
||
/* Ensure SDRC pins are mux'd for self-refresh */
|
||
@@ -429,7 +442,7 @@ static void __init omap3_beagle_map_io(void)
|
||
MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")
|
||
/* Maintainer: Syed Mohammed Khasim - http://beagleboard.org */
|
||
.phys_io = 0x48000000,
|
||
- .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
|
||
+ .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
|
||
.boot_params = 0x80000100,
|
||
.map_io = omap3_beagle_map_io,
|
||
.init_irq = omap3_beagle_init_irq,
|
||
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
|
||
index e4ec0c5..9e0b6e6 100644
|
||
--- a/arch/arm/mach-omap2/board-omap3evm.c
|
||
+++ b/arch/arm/mach-omap2/board-omap3evm.c
|
||
@@ -297,6 +297,18 @@ static struct platform_device *omap3_evm_devices[] __initdata = {
|
||
&omap3evm_smc911x_device,
|
||
};
|
||
|
||
+static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
|
||
+
|
||
+ .port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN,
|
||
+ .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
|
||
+ .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
|
||
+
|
||
+ .phy_reset = true,
|
||
+ .reset_gpio_port[0] = -EINVAL,
|
||
+ .reset_gpio_port[1] = 135,
|
||
+ .reset_gpio_port[2] = -EINVAL
|
||
+};
|
||
+
|
||
static void __init omap3_evm_init(void)
|
||
{
|
||
omap3_evm_i2c_init();
|
||
@@ -312,6 +324,9 @@ static void __init omap3_evm_init(void)
|
||
usb_nop_xceiv_register();
|
||
#endif
|
||
usb_musb_init();
|
||
+ /* Setup EHCI phy reset padconfig */
|
||
+ omap_cfg_reg(AF4_34XX_GPIO135_OUT);
|
||
+ usb_ehci_init(&ehci_pdata);
|
||
ads7846_dev_init();
|
||
}
|
||
|
||
@@ -324,7 +339,7 @@ static void __init omap3_evm_map_io(void)
|
||
MACHINE_START(OMAP3EVM, "OMAP3 EVM")
|
||
/* Maintainer: Syed Mohammed Khasim - Texas Instruments */
|
||
.phys_io = 0x48000000,
|
||
- .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
|
||
+ .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
|
||
.boot_params = 0x80000100,
|
||
.map_io = omap3_evm_map_io,
|
||
.init_irq = omap3_evm_init_irq,
|
||
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
|
||
index 7f6bf87..82b2486 100644
|
||
--- a/arch/arm/mach-omap2/board-omap3pandora.c
|
||
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
|
||
@@ -387,6 +387,18 @@ static struct platform_device *omap3pandora_devices[] __initdata = {
|
||
&pandora_keys_gpio,
|
||
};
|
||
|
||
+static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
|
||
+
|
||
+ .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
|
||
+ .port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN,
|
||
+ .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
|
||
+
|
||
+ .phy_reset = true,
|
||
+ .reset_gpio_port[0] = 16,
|
||
+ .reset_gpio_port[1] = -EINVAL,
|
||
+ .reset_gpio_port[2] = -EINVAL
|
||
+};
|
||
+
|
||
static void __init omap3pandora_init(void)
|
||
{
|
||
omap3pandora_i2c_init();
|
||
@@ -396,6 +408,7 @@ static void __init omap3pandora_init(void)
|
||
spi_register_board_info(omap3pandora_spi_board_info,
|
||
ARRAY_SIZE(omap3pandora_spi_board_info));
|
||
omap3pandora_ads7846_init();
|
||
+ usb_ehci_init(&ehci_pdata);
|
||
pandora_keys_gpio_init();
|
||
usb_musb_init();
|
||
|
||
@@ -412,7 +425,7 @@ static void __init omap3pandora_map_io(void)
|
||
|
||
MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console")
|
||
.phys_io = 0x48000000,
|
||
- .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
|
||
+ .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
|
||
.boot_params = 0x80000100,
|
||
.map_io = omap3pandora_map_io,
|
||
.init_irq = omap3pandora_init_irq,
|
||
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
|
||
index 9917d2f..d50a3f0 100644
|
||
--- a/arch/arm/mach-omap2/board-overo.c
|
||
+++ b/arch/arm/mach-omap2/board-overo.c
|
||
@@ -384,6 +384,18 @@ static struct platform_device *overo_devices[] __initdata = {
|
||
&overo_lcd_device,
|
||
};
|
||
|
||
+static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
|
||
+ .port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN,
|
||
+ .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
|
||
+ .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
|
||
+
|
||
+ .phy_reset = true,
|
||
+ .reset_gpio_port[0] = -EINVAL,
|
||
+ .reset_gpio_port[1] = OVERO_GPIO_USBH_NRESET,
|
||
+ .reset_gpio_port[2] = -EINVAL
|
||
+};
|
||
+
|
||
+
|
||
static void __init overo_init(void)
|
||
{
|
||
overo_i2c_init();
|
||
@@ -391,6 +403,7 @@ static void __init overo_init(void)
|
||
omap_serial_init();
|
||
overo_flash_init();
|
||
usb_musb_init();
|
||
+ usb_ehci_init(&ehci_pdata);
|
||
overo_ads7846_init();
|
||
overo_init_smsc911x();
|
||
|
||
@@ -433,14 +446,6 @@ static void __init overo_init(void)
|
||
else
|
||
printk(KERN_ERR "could not obtain gpio for "
|
||
"OVERO_GPIO_USBH_CPEN\n");
|
||
-
|
||
- if ((gpio_request(OVERO_GPIO_USBH_NRESET,
|
||
- "OVERO_GPIO_USBH_NRESET") == 0) &&
|
||
- (gpio_direction_output(OVERO_GPIO_USBH_NRESET, 1) == 0))
|
||
- gpio_export(OVERO_GPIO_USBH_NRESET, 0);
|
||
- else
|
||
- printk(KERN_ERR "could not obtain gpio for "
|
||
- "OVERO_GPIO_USBH_NRESET\n");
|
||
}
|
||
|
||
static void __init overo_map_io(void)
|
||
@@ -451,7 +456,7 @@ static void __init overo_map_io(void)
|
||
|
||
MACHINE_START(OVERO, "Gumstix Overo")
|
||
.phys_io = 0x48000000,
|
||
- .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
|
||
+ .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
|
||
.boot_params = 0x80000100,
|
||
.map_io = overo_map_io,
|
||
.init_irq = overo_init_irq,
|
||
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
|
||
index f9196c3..c973812 100644
|
||
--- a/arch/arm/mach-omap2/board-rx51.c
|
||
+++ b/arch/arm/mach-omap2/board-rx51.c
|
||
@@ -85,7 +85,7 @@ static void __init rx51_map_io(void)
|
||
MACHINE_START(NOKIA_RX51, "Nokia RX-51 board")
|
||
/* Maintainer: Lauri Leukkunen <lauri.leukkunen@nokia.com> */
|
||
.phys_io = 0x48000000,
|
||
- .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
|
||
+ .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
|
||
.boot_params = 0x80000100,
|
||
.map_io = rx51_map_io,
|
||
.init_irq = rx51_init_irq,
|
||
diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c
|
||
index fd3369d..48bd2af 100644
|
||
--- a/arch/arm/mach-omap2/board-zoom2.c
|
||
+++ b/arch/arm/mach-omap2/board-zoom2.c
|
||
@@ -283,7 +283,7 @@ static void __init omap_zoom2_map_io(void)
|
||
|
||
MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")
|
||
.phys_io = 0x48000000,
|
||
- .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
|
||
+ .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
|
||
.boot_params = 0x80000100,
|
||
.map_io = omap_zoom2_map_io,
|
||
.init_irq = omap_zoom2_init_irq,
|
||
diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h
|
||
index cfd0b72..a2fcfcc 100644
|
||
--- a/arch/arm/mach-omap2/cm.h
|
||
+++ b/arch/arm/mach-omap2/cm.h
|
||
@@ -17,11 +17,11 @@
|
||
#include "prcm-common.h"
|
||
|
||
#define OMAP2420_CM_REGADDR(module, reg) \
|
||
- OMAP2_IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg))
|
||
+ OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg))
|
||
#define OMAP2430_CM_REGADDR(module, reg) \
|
||
- OMAP2_IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg))
|
||
+ OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg))
|
||
#define OMAP34XX_CM_REGADDR(module, reg) \
|
||
- OMAP2_IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg))
|
||
+ OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg))
|
||
|
||
/*
|
||
* Architecture-specific global CM registers
|
||
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
|
||
index a98201c..71d5568 100644
|
||
--- a/arch/arm/mach-omap2/id.c
|
||
+++ b/arch/arm/mach-omap2/id.c
|
||
@@ -28,6 +28,7 @@
|
||
static struct omap_chip_id omap_chip;
|
||
static unsigned int omap_revision;
|
||
|
||
+u32 omap3_features;
|
||
|
||
unsigned int omap_rev(void)
|
||
{
|
||
@@ -155,12 +156,37 @@ void __init omap24xx_check_revision(void)
|
||
pr_info("\n");
|
||
}
|
||
|
||
-void __init omap34xx_check_revision(void)
|
||
+#define OMAP3_CHECK_FEATURE(status,feat) \
|
||
+ if (((status & OMAP3_ ##feat## _MASK) \
|
||
+ >> OMAP3_ ##feat## _SHIFT) != FEAT_ ##feat## _NONE) { \
|
||
+ omap3_features |= OMAP3_HAS_ ##feat; \
|
||
+ }
|
||
+
|
||
+void __init omap3_check_features(void)
|
||
+{
|
||
+ u32 status;
|
||
+
|
||
+ omap3_features = 0;
|
||
+
|
||
+ status = omap_ctrl_readl(OMAP3_CONTROL_OMAP_STATUS);
|
||
+
|
||
+ OMAP3_CHECK_FEATURE(status, L2CACHE);
|
||
+ OMAP3_CHECK_FEATURE(status, IVA);
|
||
+ OMAP3_CHECK_FEATURE(status, SGX);
|
||
+ OMAP3_CHECK_FEATURE(status, NEON);
|
||
+ OMAP3_CHECK_FEATURE(status, ISP);
|
||
+
|
||
+ /*
|
||
+ * TODO: Get additional info (where applicable)
|
||
+ * e.g. Size of L2 cache.
|
||
+ */
|
||
+}
|
||
+
|
||
+void __init omap3_check_revision(void)
|
||
{
|
||
u32 cpuid, idcode;
|
||
u16 hawkeye;
|
||
u8 rev;
|
||
- char *rev_name = "ES1.0";
|
||
|
||
/*
|
||
* We cannot access revision registers on ES1.0.
|
||
@@ -170,7 +196,7 @@ void __init omap34xx_check_revision(void)
|
||
cpuid = read_cpuid(CPUID_ID);
|
||
if ((((cpuid >> 4) & 0xfff) == 0xc08) && ((cpuid & 0xf) == 0x0)) {
|
||
omap_revision = OMAP3430_REV_ES1_0;
|
||
- goto out;
|
||
+ return;
|
||
}
|
||
|
||
/*
|
||
@@ -183,33 +209,111 @@ void __init omap34xx_check_revision(void)
|
||
hawkeye = (idcode >> 12) & 0xffff;
|
||
rev = (idcode >> 28) & 0xff;
|
||
|
||
- if (hawkeye == 0xb7ae) {
|
||
+ switch (hawkeye) {
|
||
+ case 0xb7ae:
|
||
+ /* Handle 34xx/35xx devices */
|
||
switch (rev) {
|
||
- case 0:
|
||
+ case 0: /* Take care of early samples */
|
||
+ case 1:
|
||
omap_revision = OMAP3430_REV_ES2_0;
|
||
- rev_name = "ES2.0";
|
||
break;
|
||
case 2:
|
||
omap_revision = OMAP3430_REV_ES2_1;
|
||
- rev_name = "ES2.1";
|
||
break;
|
||
case 3:
|
||
omap_revision = OMAP3430_REV_ES3_0;
|
||
- rev_name = "ES3.0";
|
||
break;
|
||
case 4:
|
||
omap_revision = OMAP3430_REV_ES3_1;
|
||
- rev_name = "ES3.1";
|
||
break;
|
||
default:
|
||
/* Use the latest known revision as default */
|
||
omap_revision = OMAP3430_REV_ES3_1;
|
||
- rev_name = "Unknown revision\n";
|
||
}
|
||
+ break;
|
||
+ case 0xb891:
|
||
+ /* Handle 36xx devices */
|
||
+ switch (rev) {
|
||
+ case 0:
|
||
+ omap_revision = OMAP3630_REV_ES1_0;
|
||
+ break;
|
||
+ default:
|
||
+ /* Use the latest known revision as default */
|
||
+ omap_revision = OMAP3630_REV_ES1_0;
|
||
+ }
|
||
+ break;
|
||
+ default:
|
||
+ /* Unknown default to latest silicon rev as default*/
|
||
+ omap_revision = OMAP3630_REV_ES1_0;
|
||
}
|
||
+}
|
||
|
||
-out:
|
||
- pr_info("OMAP%04x %s\n", omap_rev() >> 16, rev_name);
|
||
+#define OMAP3_SHOW_FEATURE(feat) \
|
||
+ if (omap3_has_ ##feat()) { \
|
||
+ pr_info (" - "#feat" : Y"); \
|
||
+ } else { \
|
||
+ pr_info (" - "#feat" : N"); \
|
||
+ }
|
||
+
|
||
+void __init omap3_cpuinfo(void)
|
||
+{
|
||
+ u8 rev = GET_OMAP_REVISION();
|
||
+ char cpu_name[16], cpu_rev[16];
|
||
+
|
||
+ /* OMAP3430 and OMAP3530 are assumed to be same.
|
||
+ *
|
||
+ * OMAP3525, OMAP3515 and OMAP3503 can be detected only based
|
||
+ * on available features. Upon detection, update the CPU id
|
||
+ * and CPU class bits.
|
||
+ */
|
||
+ if (cpu_is_omap3630())
|
||
+ strcpy(cpu_name, "3630");
|
||
+ else if (omap3_has_iva() && omap3_has_sgx())
|
||
+ strcpy(cpu_name, "3430/3530");
|
||
+ else if (omap3_has_sgx()) {
|
||
+ omap_revision = OMAP3525_REV(rev);
|
||
+ strcpy(cpu_name, "3525");
|
||
+ }
|
||
+ else if (omap3_has_iva()) {
|
||
+ omap_revision = OMAP3515_REV(rev);
|
||
+ strcpy(cpu_name, "3515");
|
||
+ }
|
||
+ else {
|
||
+ omap_revision = OMAP3503_REV(rev);
|
||
+ strcpy(cpu_name, "3503");
|
||
+ }
|
||
+
|
||
+ switch (rev) {
|
||
+ case OMAP_REVBITS_00:
|
||
+ strcpy(cpu_rev, "1.0");
|
||
+ break;
|
||
+ case OMAP_REVBITS_10:
|
||
+ strcpy(cpu_rev, "2.0");
|
||
+ break;
|
||
+ case OMAP_REVBITS_20:
|
||
+ strcpy(cpu_rev, "2.1");
|
||
+ break;
|
||
+ case OMAP_REVBITS_30:
|
||
+ strcpy(cpu_rev, "3.0");
|
||
+ break;
|
||
+ case OMAP_REVBITS_40:
|
||
+ strcpy(cpu_rev, "3.1");
|
||
+ break;
|
||
+ default:
|
||
+ /* Use the latest known revision as default */
|
||
+ strcpy(cpu_rev, "3.1");
|
||
+ }
|
||
+
|
||
+ /*
|
||
+ * Print verbose information
|
||
+ */
|
||
+ pr_info("OMAP%s ES%s\n", cpu_name, cpu_rev);
|
||
+
|
||
+ OMAP3_SHOW_FEATURE(l2cache);
|
||
+ OMAP3_SHOW_FEATURE(iva);
|
||
+ OMAP3_SHOW_FEATURE(sgx);
|
||
+ OMAP3_SHOW_FEATURE(neon);
|
||
+ OMAP3_SHOW_FEATURE(isp);
|
||
}
|
||
|
||
/*
|
||
@@ -223,8 +327,11 @@ void __init omap2_check_revision(void)
|
||
*/
|
||
if (cpu_is_omap24xx())
|
||
omap24xx_check_revision();
|
||
- else if (cpu_is_omap34xx())
|
||
- omap34xx_check_revision();
|
||
+ else if (cpu_is_omap34xx()) {
|
||
+ omap3_check_features();
|
||
+ omap3_check_revision();
|
||
+ omap3_cpuinfo();
|
||
+ }
|
||
else if (cpu_is_omap44xx()) {
|
||
printk(KERN_INFO "FIXME: CPU revision = OMAP4430\n");
|
||
return;
|
||
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
|
||
index e3a3bad..fc62953 100644
|
||
--- a/arch/arm/mach-omap2/io.c
|
||
+++ b/arch/arm/mach-omap2/io.c
|
||
@@ -203,6 +203,24 @@ static struct map_desc omap44xx_io_desc[] __initdata = {
|
||
.type = MT_DEVICE,
|
||
},
|
||
{
|
||
+ .virtual = OMAP44XX_EMIF1_VIRT,
|
||
+ .pfn = __phys_to_pfn(OMAP44XX_EMIF1_PHYS),
|
||
+ .length = OMAP44XX_EMIF1_SIZE,
|
||
+ .type = MT_DEVICE,
|
||
+ },
|
||
+ {
|
||
+ .virtual = OMAP44XX_EMIF2_VIRT,
|
||
+ .pfn = __phys_to_pfn(OMAP44XX_EMIF2_PHYS),
|
||
+ .length = OMAP44XX_EMIF2_SIZE,
|
||
+ .type = MT_DEVICE,
|
||
+ },
|
||
+ {
|
||
+ .virtual = OMAP44XX_DMM_VIRT,
|
||
+ .pfn = __phys_to_pfn(OMAP44XX_DMM_PHYS),
|
||
+ .length = OMAP44XX_DMM_SIZE,
|
||
+ .type = MT_DEVICE,
|
||
+ },
|
||
+ {
|
||
.virtual = L4_PER_44XX_VIRT,
|
||
.pfn = __phys_to_pfn(L4_PER_44XX_PHYS),
|
||
.length = L4_PER_44XX_SIZE,
|
||
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
|
||
index b828638..1db121f 100644
|
||
--- a/arch/arm/mach-omap2/irq.c
|
||
+++ b/arch/arm/mach-omap2/irq.c
|
||
@@ -178,12 +178,20 @@ void __init omap_init_irq(void)
|
||
int i;
|
||
|
||
for (i = 0; i < ARRAY_SIZE(irq_banks); i++) {
|
||
+ unsigned long base;
|
||
struct omap_irq_bank *bank = irq_banks + i;
|
||
|
||
if (cpu_is_omap24xx())
|
||
- bank->base_reg = OMAP2_IO_ADDRESS(OMAP24XX_IC_BASE);
|
||
+ base = OMAP24XX_IC_BASE;
|
||
else if (cpu_is_omap34xx())
|
||
- bank->base_reg = OMAP2_IO_ADDRESS(OMAP34XX_IC_BASE);
|
||
+ base = OMAP34XX_IC_BASE;
|
||
+
|
||
+ /* Static mapping, never released */
|
||
+ bank->base_reg = ioremap(base, SZ_4K);
|
||
+ if (!bank->base_reg) {
|
||
+ printk(KERN_ERR "Could not ioremap irq bank%i\n", i);
|
||
+ continue;
|
||
+ }
|
||
|
||
omap_irq_bank_init_one(bank);
|
||
|
||
diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
|
||
index 48ee295..a1b618c 100644
|
||
--- a/arch/arm/mach-omap2/omap-smp.c
|
||
+++ b/arch/arm/mach-omap2/omap-smp.c
|
||
@@ -26,11 +26,11 @@
|
||
#include <mach/hardware.h>
|
||
|
||
/* Registers used for communicating startup information */
|
||
-#define OMAP4_AUXCOREBOOT_REG0 (OMAP44XX_VA_WKUPGEN_BASE + 0x800)
|
||
-#define OMAP4_AUXCOREBOOT_REG1 (OMAP44XX_VA_WKUPGEN_BASE + 0x804)
|
||
+static void __iomem *omap4_auxcoreboot_reg0;
|
||
+static void __iomem *omap4_auxcoreboot_reg1;
|
||
|
||
/* SCU base address */
|
||
-static void __iomem *scu_base = OMAP44XX_VA_SCU_BASE;
|
||
+static void __iomem *scu_base;
|
||
|
||
/*
|
||
* Use SCU config register to count number of cores
|
||
@@ -46,6 +46,8 @@ static DEFINE_SPINLOCK(boot_lock);
|
||
|
||
void __cpuinit platform_secondary_init(unsigned int cpu)
|
||
{
|
||
+ void __iomem *gic_cpu_base;
|
||
+
|
||
trace_hardirqs_off();
|
||
|
||
/*
|
||
@@ -54,7 +56,10 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
|
||
* for us: do so
|
||
*/
|
||
|
||
- gic_cpu_init(0, OMAP2_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE));
|
||
+ /* Static mapping, never released */
|
||
+ gic_cpu_base = ioremap(OMAP44XX_GIC_CPU_BASE, SZ_256);
|
||
+ BUG_ON(!gic_cpu_base);
|
||
+ gic_cpu_init(0, gic_cpu_base);
|
||
|
||
/*
|
||
* Synchronise with the boot thread.
|
||
@@ -79,7 +84,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
|
||
* the AuxCoreBoot1 register is updated with cpu state
|
||
* A barrier is added to ensure that write buffer is drained
|
||
*/
|
||
- __raw_writel(cpu, OMAP4_AUXCOREBOOT_REG1);
|
||
+ __raw_writel(cpu, omap4_auxcoreboot_reg1);
|
||
smp_wmb();
|
||
|
||
timeout = jiffies + (1 * HZ);
|
||
@@ -104,7 +109,7 @@ static void __init wakeup_secondary(void)
|
||
* A barrier is added to ensure that write buffer is drained
|
||
*/
|
||
__raw_writel(virt_to_phys(omap_secondary_startup), \
|
||
- OMAP4_AUXCOREBOOT_REG0);
|
||
+ omap4_auxcoreboot_reg0);
|
||
smp_wmb();
|
||
|
||
/*
|
||
@@ -130,6 +135,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
|
||
{
|
||
unsigned int ncores = get_core_count();
|
||
unsigned int cpu = smp_processor_id();
|
||
+ void __iomem *omap4_wkupgen_base;
|
||
int i;
|
||
|
||
/* sanity check */
|
||
@@ -161,6 +167,16 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
|
||
for (i = 0; i < max_cpus; i++)
|
||
set_cpu_present(i, true);
|
||
|
||
+ /* Never released */
|
||
+ omap4_wkupgen_base = ioremap(OMAP44XX_WKUPGEN_BASE, SZ_4K);
|
||
+ BUG_ON(!omap4_wkupgen_base);
|
||
+ omap4_auxcoreboot_reg0 = omap4_wkupgen_base + 0x800;
|
||
+ omap4_auxcoreboot_reg0 = omap4_wkupgen_base + 0x804;
|
||
+
|
||
+ /* Never released */
|
||
+ scu_base = ioremap(OMAP44XX_GIC_CPU_BASE, SZ_256);
|
||
+ BUG_ON(!scu_base);
|
||
+
|
||
if (max_cpus > 1) {
|
||
/*
|
||
* Enable the local timer or broadcast device for the
|
||
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
|
||
index d2e0f1c..8ac8798 100644
|
||
--- a/arch/arm/mach-omap2/omap_hwmod.c
|
||
+++ b/arch/arm/mach-omap2/omap_hwmod.c
|
||
@@ -496,6 +496,7 @@ static void __iomem *_find_mpu_rt_base(struct omap_hwmod *oh, u8 index)
|
||
struct omap_hwmod_addr_space *mem;
|
||
int i;
|
||
int found = 0;
|
||
+ void __iomem *va_start;
|
||
|
||
if (!oh || oh->slaves_cnt == 0)
|
||
return NULL;
|
||
@@ -509,16 +510,20 @@ static void __iomem *_find_mpu_rt_base(struct omap_hwmod *oh, u8 index)
|
||
}
|
||
}
|
||
|
||
- /* XXX use ioremap() instead? */
|
||
-
|
||
- if (found)
|
||
+ if (found) {
|
||
+ va_start = ioremap(mem->pa_start, mem->pa_end - mem->pa_start);
|
||
+ if (!va_start) {
|
||
+ pr_err("omap_hwmod: %s: Could not ioremap\n", oh->name);
|
||
+ return NULL;
|
||
+ }
|
||
pr_debug("omap_hwmod: %s: MPU register target at va %p\n",
|
||
- oh->name, OMAP2_IO_ADDRESS(mem->pa_start));
|
||
- else
|
||
+ oh->name, va_start);
|
||
+ } else {
|
||
pr_debug("omap_hwmod: %s: no MPU register target found\n",
|
||
oh->name);
|
||
+ }
|
||
|
||
- return (found) ? OMAP2_IO_ADDRESS(mem->pa_start) : NULL;
|
||
+ return (found) ? va_start : NULL;
|
||
}
|
||
|
||
/**
|
||
@@ -1148,6 +1153,7 @@ int omap_hwmod_unregister(struct omap_hwmod *oh)
|
||
pr_debug("omap_hwmod: %s: unregistering\n", oh->name);
|
||
|
||
mutex_lock(&omap_hwmod_mutex);
|
||
+ iounmap(oh->_rt_va);
|
||
list_del(&oh->node);
|
||
mutex_unlock(&omap_hwmod_mutex);
|
||
|
||
diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
|
||
index 2fc4d6a..deed1dd 100644
|
||
--- a/arch/arm/mach-omap2/pm-debug.c
|
||
+++ b/arch/arm/mach-omap2/pm-debug.c
|
||
@@ -51,7 +51,8 @@ int omap2_pm_debug;
|
||
regs[reg_count++].val = __raw_readl(reg)
|
||
#define DUMP_INTC_REG(reg, off) \
|
||
regs[reg_count].name = #reg; \
|
||
- regs[reg_count++].val = __raw_readl(OMAP2_IO_ADDRESS(0x480fe000 + (off)))
|
||
+ regs[reg_count++].val = \
|
||
+ __raw_readl(OMAP2_L4_IO_ADDRESS(0x480fe000 + (off)))
|
||
|
||
static int __init pm_dbg_init(void);
|
||
|
||
diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
|
||
index 03c467c..a117f85 100644
|
||
--- a/arch/arm/mach-omap2/prm.h
|
||
+++ b/arch/arm/mach-omap2/prm.h
|
||
@@ -17,11 +17,11 @@
|
||
#include "prcm-common.h"
|
||
|
||
#define OMAP2420_PRM_REGADDR(module, reg) \
|
||
- OMAP2_IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg))
|
||
+ OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg))
|
||
#define OMAP2430_PRM_REGADDR(module, reg) \
|
||
- OMAP2_IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg))
|
||
+ OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg))
|
||
#define OMAP34XX_PRM_REGADDR(module, reg) \
|
||
- OMAP2_IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg))
|
||
+ OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg))
|
||
|
||
/*
|
||
* Architecture-specific global PRM registers
|
||
diff --git a/arch/arm/mach-omap2/sdrc.h b/arch/arm/mach-omap2/sdrc.h
|
||
index 0837eda..345183d 100644
|
||
--- a/arch/arm/mach-omap2/sdrc.h
|
||
+++ b/arch/arm/mach-omap2/sdrc.h
|
||
@@ -48,9 +48,12 @@ static inline u32 sms_read_reg(u16 reg)
|
||
return __raw_readl(OMAP_SMS_REGADDR(reg));
|
||
}
|
||
#else
|
||
-#define OMAP242X_SDRC_REGADDR(reg) OMAP2_IO_ADDRESS(OMAP2420_SDRC_BASE + (reg))
|
||
-#define OMAP243X_SDRC_REGADDR(reg) OMAP2_IO_ADDRESS(OMAP243X_SDRC_BASE + (reg))
|
||
-#define OMAP34XX_SDRC_REGADDR(reg) OMAP2_IO_ADDRESS(OMAP343X_SDRC_BASE + (reg))
|
||
+#define OMAP242X_SDRC_REGADDR(reg) \
|
||
+ OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE + (reg))
|
||
+#define OMAP243X_SDRC_REGADDR(reg) \
|
||
+ OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE + (reg))
|
||
+#define OMAP34XX_SDRC_REGADDR(reg) \
|
||
+ OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE + (reg))
|
||
#endif /* __ASSEMBLER__ */
|
||
|
||
#endif
|
||
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
|
||
index ae21868..7f722a7 100644
|
||
--- a/arch/arm/mach-omap2/serial.c
|
||
+++ b/arch/arm/mach-omap2/serial.c
|
||
@@ -73,7 +73,6 @@ static LIST_HEAD(uart_list);
|
||
|
||
static struct plat_serial8250_port serial_platform_data0[] = {
|
||
{
|
||
- .membase = OMAP2_IO_ADDRESS(OMAP_UART1_BASE),
|
||
.mapbase = OMAP_UART1_BASE,
|
||
.irq = 72,
|
||
.flags = UPF_BOOT_AUTOCONF,
|
||
@@ -87,7 +86,6 @@ static struct plat_serial8250_port serial_platform_data0[] = {
|
||
|
||
static struct plat_serial8250_port serial_platform_data1[] = {
|
||
{
|
||
- .membase = OMAP2_IO_ADDRESS(OMAP_UART2_BASE),
|
||
.mapbase = OMAP_UART2_BASE,
|
||
.irq = 73,
|
||
.flags = UPF_BOOT_AUTOCONF,
|
||
@@ -101,7 +99,6 @@ static struct plat_serial8250_port serial_platform_data1[] = {
|
||
|
||
static struct plat_serial8250_port serial_platform_data2[] = {
|
||
{
|
||
- .membase = OMAP2_IO_ADDRESS(OMAP_UART3_BASE),
|
||
.mapbase = OMAP_UART3_BASE,
|
||
.irq = 74,
|
||
.flags = UPF_BOOT_AUTOCONF,
|
||
@@ -110,7 +107,6 @@ static struct plat_serial8250_port serial_platform_data2[] = {
|
||
.uartclk = OMAP24XX_BASE_BAUD * 16,
|
||
}, {
|
||
#ifdef CONFIG_ARCH_OMAP4
|
||
- .membase = OMAP2_IO_ADDRESS(OMAP_UART4_BASE),
|
||
.mapbase = OMAP_UART4_BASE,
|
||
.irq = 70,
|
||
.flags = UPF_BOOT_AUTOCONF,
|
||
@@ -126,7 +122,6 @@ static struct plat_serial8250_port serial_platform_data2[] = {
|
||
#ifdef CONFIG_ARCH_OMAP4
|
||
static struct plat_serial8250_port serial_platform_data3[] = {
|
||
{
|
||
- .membase = OMAP2_IO_ADDRESS(OMAP_UART4_BASE),
|
||
.mapbase = OMAP_UART4_BASE,
|
||
.irq = 70,
|
||
.flags = UPF_BOOT_AUTOCONF,
|
||
@@ -549,7 +544,7 @@ static inline void omap_uart_idle_init(struct omap_uart_state *uart) {}
|
||
#define DEV_CREATE_FILE(dev, attr)
|
||
#endif /* CONFIG_PM */
|
||
|
||
-static struct omap_uart_state omap_uart[OMAP_MAX_NR_PORTS] = {
|
||
+static struct omap_uart_state omap_uart[] = {
|
||
{
|
||
.pdev = {
|
||
.name = "serial8250",
|
||
@@ -599,12 +594,22 @@ void __init omap_serial_early_init(void)
|
||
* if not needed.
|
||
*/
|
||
|
||
- for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
|
||
+ for (i = 0; i < ARRAY_SIZE(omap_uart); i++) {
|
||
struct omap_uart_state *uart = &omap_uart[i];
|
||
struct platform_device *pdev = &uart->pdev;
|
||
struct device *dev = &pdev->dev;
|
||
struct plat_serial8250_port *p = dev->platform_data;
|
||
|
||
+ /*
|
||
+ * Module 4KB + L4 interconnect 4KB
|
||
+ * Static mapping, never released
|
||
+ */
|
||
+ p->membase = ioremap(p->mapbase, SZ_8K);
|
||
+ if (!p->membase) {
|
||
+ printk(KERN_ERR "ioremap failed for uart%i\n", i + 1);
|
||
+ continue;
|
||
+ }
|
||
+
|
||
sprintf(name, "uart%d_ick", i+1);
|
||
uart->ick = clk_get(NULL, name);
|
||
if (IS_ERR(uart->ick)) {
|
||
@@ -641,7 +646,7 @@ void __init omap_serial_init(void)
|
||
{
|
||
int i;
|
||
|
||
- for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
|
||
+ for (i = 0; i < ARRAY_SIZE(omap_uart); i++) {
|
||
struct omap_uart_state *uart = &omap_uart[i];
|
||
struct platform_device *pdev = &uart->pdev;
|
||
struct device *dev = &pdev->dev;
|
||
diff --git a/arch/arm/mach-omap2/sram242x.S b/arch/arm/mach-omap2/sram242x.S
|
||
index 9b62208..92e6e1a 100644
|
||
--- a/arch/arm/mach-omap2/sram242x.S
|
||
+++ b/arch/arm/mach-omap2/sram242x.S
|
||
@@ -128,7 +128,7 @@ omap242x_sdi_prcm_voltctrl:
|
||
prcm_mask_val:
|
||
.word 0xFFFF3FFC
|
||
omap242x_sdi_timer_32ksynct_cr:
|
||
- .word OMAP2_IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
|
||
+ .word OMAP2_L4_IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
|
||
ENTRY(omap242x_sram_ddr_init_sz)
|
||
.word . - omap242x_sram_ddr_init
|
||
|
||
@@ -224,7 +224,7 @@ omap242x_srs_prcm_voltctrl:
|
||
ddr_prcm_mask_val:
|
||
.word 0xFFFF3FFC
|
||
omap242x_srs_timer_32ksynct:
|
||
- .word OMAP2_IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
|
||
+ .word OMAP2_L4_IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
|
||
|
||
ENTRY(omap242x_sram_reprogram_sdrc_sz)
|
||
.word . - omap242x_sram_reprogram_sdrc
|
||
diff --git a/arch/arm/mach-omap2/sram243x.S b/arch/arm/mach-omap2/sram243x.S
|
||
index df2cd92..ab49736 100644
|
||
--- a/arch/arm/mach-omap2/sram243x.S
|
||
+++ b/arch/arm/mach-omap2/sram243x.S
|
||
@@ -128,7 +128,7 @@ omap243x_sdi_prcm_voltctrl:
|
||
prcm_mask_val:
|
||
.word 0xFFFF3FFC
|
||
omap243x_sdi_timer_32ksynct_cr:
|
||
- .word OMAP2_IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
|
||
+ .word OMAP2_L4_IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
|
||
ENTRY(omap243x_sram_ddr_init_sz)
|
||
.word . - omap243x_sram_ddr_init
|
||
|
||
@@ -224,7 +224,7 @@ omap243x_srs_prcm_voltctrl:
|
||
ddr_prcm_mask_val:
|
||
.word 0xFFFF3FFC
|
||
omap243x_srs_timer_32ksynct:
|
||
- .word OMAP2_IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
|
||
+ .word OMAP2_L4_IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
|
||
|
||
ENTRY(omap243x_sram_reprogram_sdrc_sz)
|
||
.word . - omap243x_sram_reprogram_sdrc
|
||
diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c
|
||
index e2338c0..cd72970 100644
|
||
--- a/arch/arm/mach-omap2/timer-gp.c
|
||
+++ b/arch/arm/mach-omap2/timer-gp.c
|
||
@@ -231,7 +231,8 @@ static void __init omap2_gp_clocksource_init(void)
|
||
static void __init omap2_gp_timer_init(void)
|
||
{
|
||
#ifdef CONFIG_LOCAL_TIMERS
|
||
- twd_base = OMAP2_IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE);
|
||
+ twd_base = ioremap(OMAP44XX_LOCAL_TWD_BASE, SZ_256);
|
||
+ BUG_ON(!twd_base);
|
||
#endif
|
||
omap_dm_timer_init();
|
||
|
||
diff --git a/arch/arm/mach-omap2/usb-ehci.c b/arch/arm/mach-omap2/usb-ehci.c
|
||
new file mode 100644
|
||
index 0000000..a29c8ca
|
||
--- /dev/null
|
||
+++ b/arch/arm/mach-omap2/usb-ehci.c
|
||
@@ -0,0 +1,192 @@
|
||
+/*
|
||
+ * linux/arch/arm/mach-omap2/usb-ehci.c
|
||
+ *
|
||
+ * This file will contain the board specific details for the
|
||
+ * Synopsys EHCI host controller on OMAP3430
|
||
+ *
|
||
+ * Copyright (C) 2007 Texas Instruments
|
||
+ * Author: Vikram Pandita <vikram.pandita@ti.com>
|
||
+ *
|
||
+ * Generalization by:
|
||
+ * Felipe Balbi <felipe.balbi@nokia.com>
|
||
+ *
|
||
+ * This program is free software; you can redistribute it and/or modify
|
||
+ * it under the terms of the GNU General Public License version 2 as
|
||
+ * published by the Free Software Foundation.
|
||
+ */
|
||
+
|
||
+#include <linux/types.h>
|
||
+#include <linux/errno.h>
|
||
+#include <linux/delay.h>
|
||
+#include <linux/platform_device.h>
|
||
+#include <linux/clk.h>
|
||
+#include <asm/io.h>
|
||
+#include <mach/mux.h>
|
||
+
|
||
+#include <mach/hardware.h>
|
||
+#include <mach/irqs.h>
|
||
+#include <mach/usb.h>
|
||
+
|
||
+#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_EHCI_HCD_MODULE)
|
||
+
|
||
+static struct resource ehci_resources[] = {
|
||
+ {
|
||
+ .start = OMAP34XX_EHCI_BASE,
|
||
+ .end = OMAP34XX_EHCI_BASE + SZ_1K - 1,
|
||
+ .flags = IORESOURCE_MEM,
|
||
+ },
|
||
+ {
|
||
+ .start = OMAP34XX_UHH_CONFIG_BASE,
|
||
+ .end = OMAP34XX_UHH_CONFIG_BASE + SZ_1K - 1,
|
||
+ .flags = IORESOURCE_MEM,
|
||
+ },
|
||
+ {
|
||
+ .start = OMAP34XX_USBTLL_BASE,
|
||
+ .end = OMAP34XX_USBTLL_BASE + SZ_4K - 1,
|
||
+ .flags = IORESOURCE_MEM,
|
||
+ },
|
||
+ { /* general IRQ */
|
||
+ .start = INT_34XX_EHCI_IRQ,
|
||
+ .flags = IORESOURCE_IRQ,
|
||
+ }
|
||
+};
|
||
+
|
||
+static u64 ehci_dmamask = ~(u32)0;
|
||
+static struct platform_device ehci_device = {
|
||
+ .name = "ehci-omap",
|
||
+ .id = 0,
|
||
+ .dev = {
|
||
+ .dma_mask = &ehci_dmamask,
|
||
+ .coherent_dma_mask = 0xffffffff,
|
||
+ .platform_data = NULL,
|
||
+ },
|
||
+ .num_resources = ARRAY_SIZE(ehci_resources),
|
||
+ .resource = ehci_resources,
|
||
+};
|
||
+
|
||
+/* MUX settings for EHCI pins */
|
||
+/*
|
||
+ * setup_ehci_io_mux - initialize IO pad mux for USBHOST
|
||
+ */
|
||
+static void setup_ehci_io_mux(enum ehci_hcd_omap_mode *port_mode)
|
||
+{
|
||
+ switch (port_mode[0]) {
|
||
+ case EHCI_HCD_OMAP_MODE_PHY:
|
||
+ omap_cfg_reg(Y9_3430_USB1HS_PHY_STP);
|
||
+ omap_cfg_reg(Y8_3430_USB1HS_PHY_CLK);
|
||
+ omap_cfg_reg(AA14_3430_USB1HS_PHY_DIR);
|
||
+ omap_cfg_reg(AA11_3430_USB1HS_PHY_NXT);
|
||
+ omap_cfg_reg(W13_3430_USB1HS_PHY_DATA0);
|
||
+ omap_cfg_reg(W12_3430_USB1HS_PHY_DATA1);
|
||
+ omap_cfg_reg(W11_3430_USB1HS_PHY_DATA2);
|
||
+ omap_cfg_reg(Y11_3430_USB1HS_PHY_DATA3);
|
||
+ omap_cfg_reg(W9_3430_USB1HS_PHY_DATA4);
|
||
+ omap_cfg_reg(Y12_3430_USB1HS_PHY_DATA5);
|
||
+ omap_cfg_reg(W8_3430_USB1HS_PHY_DATA6);
|
||
+ omap_cfg_reg(Y13_3430_USB1HS_PHY_DATA7);
|
||
+ break;
|
||
+ case EHCI_HCD_OMAP_MODE_TLL:
|
||
+ omap_cfg_reg(Y9_3430_USB1HS_TLL_STP);
|
||
+ omap_cfg_reg(Y8_3430_USB1HS_TLL_CLK);
|
||
+ omap_cfg_reg(AA14_3430_USB1HS_TLL_DIR);
|
||
+ omap_cfg_reg(AA11_3430_USB1HS_TLL_NXT);
|
||
+ omap_cfg_reg(W13_3430_USB1HS_TLL_DATA0);
|
||
+ omap_cfg_reg(W12_3430_USB1HS_TLL_DATA1);
|
||
+ omap_cfg_reg(W11_3430_USB1HS_TLL_DATA2);
|
||
+ omap_cfg_reg(Y11_3430_USB1HS_TLL_DATA3);
|
||
+ omap_cfg_reg(W9_3430_USB1HS_TLL_DATA4);
|
||
+ omap_cfg_reg(Y12_3430_USB1HS_TLL_DATA5);
|
||
+ omap_cfg_reg(W8_3430_USB1HS_TLL_DATA6);
|
||
+ omap_cfg_reg(Y13_3430_USB1HS_TLL_DATA7);
|
||
+ break;
|
||
+ case EHCI_HCD_OMAP_MODE_UNKNOWN:
|
||
+ /* FALLTHROUGH */
|
||
+ default:
|
||
+ break;
|
||
+ }
|
||
+
|
||
+ switch (port_mode[1]) {
|
||
+ case EHCI_HCD_OMAP_MODE_PHY:
|
||
+ omap_cfg_reg(AA10_3430_USB2HS_PHY_STP);
|
||
+ omap_cfg_reg(AA8_3430_USB2HS_PHY_CLK);
|
||
+ omap_cfg_reg(AA9_3430_USB2HS_PHY_DIR);
|
||
+ omap_cfg_reg(AB11_3430_USB2HS_PHY_NXT);
|
||
+ omap_cfg_reg(AB10_3430_USB2HS_PHY_DATA0);
|
||
+ omap_cfg_reg(AB9_3430_USB2HS_PHY_DATA1);
|
||
+ omap_cfg_reg(W3_3430_USB2HS_PHY_DATA2);
|
||
+ omap_cfg_reg(T4_3430_USB2HS_PHY_DATA3);
|
||
+ omap_cfg_reg(T3_3430_USB2HS_PHY_DATA4);
|
||
+ omap_cfg_reg(R3_3430_USB2HS_PHY_DATA5);
|
||
+ omap_cfg_reg(R4_3430_USB2HS_PHY_DATA6);
|
||
+ omap_cfg_reg(T2_3430_USB2HS_PHY_DATA7);
|
||
+ break;
|
||
+ case EHCI_HCD_OMAP_MODE_TLL:
|
||
+ omap_cfg_reg(AA10_3430_USB2HS_TLL_STP);
|
||
+ omap_cfg_reg(AA8_3430_USB2HS_TLL_CLK);
|
||
+ omap_cfg_reg(AA9_3430_USB2HS_TLL_DIR);
|
||
+ omap_cfg_reg(AB11_3430_USB2HS_TLL_NXT);
|
||
+ omap_cfg_reg(AB10_3430_USB2HS_TLL_DATA0);
|
||
+ omap_cfg_reg(AB9_3430_USB2HS_TLL_DATA1);
|
||
+ omap_cfg_reg(W3_3430_USB2HS_TLL_DATA2);
|
||
+ omap_cfg_reg(T4_3430_USB2HS_TLL_DATA3);
|
||
+ omap_cfg_reg(T3_3430_USB2HS_TLL_DATA4);
|
||
+ omap_cfg_reg(R3_3430_USB2HS_TLL_DATA5);
|
||
+ omap_cfg_reg(R4_3430_USB2HS_TLL_DATA6);
|
||
+ omap_cfg_reg(T2_3430_USB2HS_TLL_DATA7);
|
||
+ break;
|
||
+ case EHCI_HCD_OMAP_MODE_UNKNOWN:
|
||
+ /* FALLTHROUGH */
|
||
+ default:
|
||
+ break;
|
||
+ }
|
||
+
|
||
+ switch (port_mode[2]) {
|
||
+ case EHCI_HCD_OMAP_MODE_PHY:
|
||
+ printk(KERN_WARNING "Port3 can't be used in PHY mode\n");
|
||
+ break;
|
||
+ case EHCI_HCD_OMAP_MODE_TLL:
|
||
+ omap_cfg_reg(AB3_3430_USB3HS_TLL_STP);
|
||
+ omap_cfg_reg(AA6_3430_USB3HS_TLL_CLK);
|
||
+ omap_cfg_reg(AA3_3430_USB3HS_TLL_DIR);
|
||
+ omap_cfg_reg(Y3_3430_USB3HS_TLL_NXT);
|
||
+ omap_cfg_reg(AA5_3430_USB3HS_TLL_DATA0);
|
||
+ omap_cfg_reg(Y4_3430_USB3HS_TLL_DATA1);
|
||
+ omap_cfg_reg(Y5_3430_USB3HS_TLL_DATA2);
|
||
+ omap_cfg_reg(W5_3430_USB3HS_TLL_DATA3);
|
||
+ omap_cfg_reg(AB12_3430_USB3HS_TLL_DATA4);
|
||
+ omap_cfg_reg(AB13_3430_USB3HS_TLL_DATA5);
|
||
+ omap_cfg_reg(AA13_3430_USB3HS_TLL_DATA6);
|
||
+ omap_cfg_reg(AA12_3430_USB3HS_TLL_DATA7);
|
||
+ break;
|
||
+ case EHCI_HCD_OMAP_MODE_UNKNOWN:
|
||
+ /* FALLTHROUGH */
|
||
+ default:
|
||
+ break;
|
||
+ }
|
||
+
|
||
+ return;
|
||
+}
|
||
+
|
||
+void __init usb_ehci_init(struct ehci_hcd_omap_platform_data *pdata)
|
||
+{
|
||
+ platform_device_add_data(&ehci_device, pdata, sizeof(*pdata));
|
||
+
|
||
+ /* Setup Pin IO MUX for EHCI */
|
||
+ if (cpu_is_omap34xx())
|
||
+ setup_ehci_io_mux(pdata->port_mode);
|
||
+
|
||
+ if (platform_device_register(&ehci_device) < 0) {
|
||
+ printk(KERN_ERR "Unable to register HS-USB (EHCI) device\n");
|
||
+ return;
|
||
+ }
|
||
+}
|
||
+
|
||
+#else
|
||
+
|
||
+void __init usb_ehci_init(struct ehci_hcd_omap_platform_data *pdata)
|
||
+
|
||
+{
|
||
+}
|
||
+
|
||
+#endif /* CONFIG_USB_EHCI_HCD */
|
||
+
|
||
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
|
||
index 3a4768d..1aa58d2 100644
|
||
--- a/arch/arm/plat-omap/common.c
|
||
+++ b/arch/arm/plat-omap/common.c
|
||
@@ -224,12 +224,12 @@ static void __init __omap2_set_globals(struct omap_globals *omap2_globals)
|
||
|
||
static struct omap_globals omap242x_globals = {
|
||
.class = OMAP242X_CLASS,
|
||
- .tap = OMAP2_IO_ADDRESS(0x48014000),
|
||
- .sdrc = OMAP2_IO_ADDRESS(OMAP2420_SDRC_BASE),
|
||
- .sms = OMAP2_IO_ADDRESS(OMAP2420_SMS_BASE),
|
||
- .ctrl = OMAP2_IO_ADDRESS(OMAP2420_CTRL_BASE),
|
||
- .prm = OMAP2_IO_ADDRESS(OMAP2420_PRM_BASE),
|
||
- .cm = OMAP2_IO_ADDRESS(OMAP2420_CM_BASE),
|
||
+ .tap = OMAP2_L4_IO_ADDRESS(0x48014000),
|
||
+ .sdrc = OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE),
|
||
+ .sms = OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE),
|
||
+ .ctrl = OMAP2_L4_IO_ADDRESS(OMAP2420_CTRL_BASE),
|
||
+ .prm = OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE),
|
||
+ .cm = OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE),
|
||
};
|
||
|
||
void __init omap2_set_globals_242x(void)
|
||
@@ -242,12 +242,12 @@ void __init omap2_set_globals_242x(void)
|
||
|
||
static struct omap_globals omap243x_globals = {
|
||
.class = OMAP243X_CLASS,
|
||
- .tap = OMAP2_IO_ADDRESS(0x4900a000),
|
||
- .sdrc = OMAP2_IO_ADDRESS(OMAP243X_SDRC_BASE),
|
||
- .sms = OMAP2_IO_ADDRESS(OMAP243X_SMS_BASE),
|
||
- .ctrl = OMAP2_IO_ADDRESS(OMAP243X_CTRL_BASE),
|
||
- .prm = OMAP2_IO_ADDRESS(OMAP2430_PRM_BASE),
|
||
- .cm = OMAP2_IO_ADDRESS(OMAP2430_CM_BASE),
|
||
+ .tap = OMAP2_L4_IO_ADDRESS(0x4900a000),
|
||
+ .sdrc = OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE),
|
||
+ .sms = OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE),
|
||
+ .ctrl = OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE),
|
||
+ .prm = OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE),
|
||
+ .cm = OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE),
|
||
};
|
||
|
||
void __init omap2_set_globals_243x(void)
|
||
@@ -260,12 +260,12 @@ void __init omap2_set_globals_243x(void)
|
||
|
||
static struct omap_globals omap343x_globals = {
|
||
.class = OMAP343X_CLASS,
|
||
- .tap = OMAP2_IO_ADDRESS(0x4830A000),
|
||
- .sdrc = OMAP2_IO_ADDRESS(OMAP343X_SDRC_BASE),
|
||
- .sms = OMAP2_IO_ADDRESS(OMAP343X_SMS_BASE),
|
||
- .ctrl = OMAP2_IO_ADDRESS(OMAP343X_CTRL_BASE),
|
||
- .prm = OMAP2_IO_ADDRESS(OMAP3430_PRM_BASE),
|
||
- .cm = OMAP2_IO_ADDRESS(OMAP3430_CM_BASE),
|
||
+ .tap = OMAP2_L4_IO_ADDRESS(0x4830A000),
|
||
+ .sdrc = OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE),
|
||
+ .sms = OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE),
|
||
+ .ctrl = OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE),
|
||
+ .prm = OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE),
|
||
+ .cm = OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE),
|
||
};
|
||
|
||
void __init omap2_set_globals_343x(void)
|
||
@@ -277,10 +277,10 @@ void __init omap2_set_globals_343x(void)
|
||
#if defined(CONFIG_ARCH_OMAP4)
|
||
static struct omap_globals omap4_globals = {
|
||
.class = OMAP443X_CLASS,
|
||
- .tap = OMAP2_IO_ADDRESS(0x4830a000),
|
||
- .ctrl = OMAP2_IO_ADDRESS(OMAP443X_CTRL_BASE),
|
||
- .prm = OMAP2_IO_ADDRESS(OMAP4430_PRM_BASE),
|
||
- .cm = OMAP2_IO_ADDRESS(OMAP4430_CM_BASE),
|
||
+ .tap = OMAP2_L4_IO_ADDRESS(0x4830a000),
|
||
+ .ctrl = OMAP2_L4_IO_ADDRESS(OMAP443X_CTRL_BASE),
|
||
+ .prm = OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE),
|
||
+ .cm = OMAP2_L4_IO_ADDRESS(OMAP4430_CM_BASE),
|
||
};
|
||
|
||
void __init omap2_set_globals_443x(void)
|
||
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
|
||
index a64b692..d2f5475 100644
|
||
--- a/arch/arm/plat-omap/devices.c
|
||
+++ b/arch/arm/plat-omap/devices.c
|
||
@@ -113,17 +113,17 @@ static void omap_init_kp(void)
|
||
omap_cfg_reg(E19_1610_KBR4);
|
||
omap_cfg_reg(N19_1610_KBR5);
|
||
} else if (machine_is_omap_perseus2() || machine_is_omap_fsample()) {
|
||
- omap_cfg_reg(E2_730_KBR0);
|
||
- omap_cfg_reg(J7_730_KBR1);
|
||
- omap_cfg_reg(E1_730_KBR2);
|
||
- omap_cfg_reg(F3_730_KBR3);
|
||
- omap_cfg_reg(D2_730_KBR4);
|
||
-
|
||
- omap_cfg_reg(C2_730_KBC0);
|
||
- omap_cfg_reg(D3_730_KBC1);
|
||
- omap_cfg_reg(E4_730_KBC2);
|
||
- omap_cfg_reg(F4_730_KBC3);
|
||
- omap_cfg_reg(E3_730_KBC4);
|
||
+ omap_cfg_reg(E2_7XX_KBR0);
|
||
+ omap_cfg_reg(J7_7XX_KBR1);
|
||
+ omap_cfg_reg(E1_7XX_KBR2);
|
||
+ omap_cfg_reg(F3_7XX_KBR3);
|
||
+ omap_cfg_reg(D2_7XX_KBR4);
|
||
+
|
||
+ omap_cfg_reg(C2_7XX_KBC0);
|
||
+ omap_cfg_reg(D3_7XX_KBC1);
|
||
+ omap_cfg_reg(E4_7XX_KBC2);
|
||
+ omap_cfg_reg(F4_7XX_KBC3);
|
||
+ omap_cfg_reg(E3_7XX_KBC4);
|
||
} else if (machine_is_omap_h4()) {
|
||
omap_cfg_reg(T19_24XX_KBR0);
|
||
omap_cfg_reg(R19_24XX_KBR1);
|
||
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
|
||
index 0eb676d..034686d 100644
|
||
--- a/arch/arm/plat-omap/dma.c
|
||
+++ b/arch/arm/plat-omap/dma.c
|
||
@@ -2347,40 +2347,46 @@ EXPORT_SYMBOL(omap_stop_lcd_dma);
|
||
|
||
static int __init omap_init_dma(void)
|
||
{
|
||
+ unsigned long base;
|
||
int ch, r;
|
||
|
||
if (cpu_class_is_omap1()) {
|
||
- omap_dma_base = OMAP1_IO_ADDRESS(OMAP1_DMA_BASE);
|
||
+ base = OMAP1_DMA_BASE;
|
||
dma_lch_count = OMAP1_LOGICAL_DMA_CH_COUNT;
|
||
} else if (cpu_is_omap24xx()) {
|
||
- omap_dma_base = OMAP2_IO_ADDRESS(OMAP24XX_DMA4_BASE);
|
||
+ base = OMAP24XX_DMA4_BASE;
|
||
dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
|
||
} else if (cpu_is_omap34xx()) {
|
||
- omap_dma_base = OMAP2_IO_ADDRESS(OMAP34XX_DMA4_BASE);
|
||
+ base = OMAP34XX_DMA4_BASE;
|
||
dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
|
||
} else if (cpu_is_omap44xx()) {
|
||
- omap_dma_base = OMAP2_IO_ADDRESS(OMAP44XX_DMA4_BASE);
|
||
+ base = OMAP44XX_DMA4_BASE;
|
||
dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
|
||
} else {
|
||
pr_err("DMA init failed for unsupported omap\n");
|
||
return -ENODEV;
|
||
}
|
||
|
||
+ omap_dma_base = ioremap(base, SZ_4K);
|
||
+ BUG_ON(!omap_dma_base);
|
||
+
|
||
if (cpu_class_is_omap2() && omap_dma_reserve_channels
|
||
&& (omap_dma_reserve_channels <= dma_lch_count))
|
||
dma_lch_count = omap_dma_reserve_channels;
|
||
|
||
dma_chan = kzalloc(sizeof(struct omap_dma_lch) * dma_lch_count,
|
||
GFP_KERNEL);
|
||
- if (!dma_chan)
|
||
- return -ENOMEM;
|
||
+ if (!dma_chan) {
|
||
+ r = -ENOMEM;
|
||
+ goto out_unmap;
|
||
+ }
|
||
|
||
if (cpu_class_is_omap2()) {
|
||
dma_linked_lch = kzalloc(sizeof(struct dma_link_info) *
|
||
dma_lch_count, GFP_KERNEL);
|
||
if (!dma_linked_lch) {
|
||
- kfree(dma_chan);
|
||
- return -ENOMEM;
|
||
+ r = -ENOMEM;
|
||
+ goto out_free;
|
||
}
|
||
}
|
||
|
||
@@ -2454,7 +2460,7 @@ static int __init omap_init_dma(void)
|
||
for (i = 0; i < ch; i++)
|
||
free_irq(omap1_dma_irq[i],
|
||
(void *) (i + 1));
|
||
- return r;
|
||
+ goto out_free;
|
||
}
|
||
}
|
||
}
|
||
@@ -2496,11 +2502,19 @@ static int __init omap_init_dma(void)
|
||
"(error %d)\n", r);
|
||
for (i = 0; i < dma_chan_count; i++)
|
||
free_irq(omap1_dma_irq[i], (void *) (i + 1));
|
||
- return r;
|
||
+ goto out_free;
|
||
}
|
||
}
|
||
|
||
return 0;
|
||
+
|
||
+out_free:
|
||
+ kfree(dma_chan);
|
||
+
|
||
+out_unmap:
|
||
+ iounmap(omap_dma_base);
|
||
+
|
||
+ return r;
|
||
}
|
||
|
||
arch_initcall(omap_init_dma);
|
||
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
|
||
index d325b54..e4e848e 100644
|
||
--- a/arch/arm/plat-omap/dmtimer.c
|
||
+++ b/arch/arm/plat-omap/dmtimer.c
|
||
@@ -742,16 +742,17 @@ EXPORT_SYMBOL_GPL(omap_dm_timers_active);
|
||
int __init omap_dm_timer_init(void)
|
||
{
|
||
struct omap_dm_timer *timer;
|
||
- int i;
|
||
+ int i, map_size = SZ_8K; /* Module 4KB + L4 4KB except on omap1 */
|
||
|
||
if (!(cpu_is_omap16xx() || cpu_class_is_omap2()))
|
||
return -ENODEV;
|
||
|
||
spin_lock_init(&dm_timer_lock);
|
||
|
||
- if (cpu_class_is_omap1())
|
||
+ if (cpu_class_is_omap1()) {
|
||
dm_timers = omap1_dm_timers;
|
||
- else if (cpu_is_omap24xx()) {
|
||
+ map_size = SZ_2K;
|
||
+ } else if (cpu_is_omap24xx()) {
|
||
dm_timers = omap2_dm_timers;
|
||
dm_source_names = omap2_dm_source_names;
|
||
dm_source_clocks = omap2_dm_source_clocks;
|
||
@@ -774,10 +775,11 @@ int __init omap_dm_timer_init(void)
|
||
|
||
for (i = 0; i < dm_timer_count; i++) {
|
||
timer = &dm_timers[i];
|
||
- if (cpu_class_is_omap1())
|
||
- timer->io_base = OMAP1_IO_ADDRESS(timer->phys_base);
|
||
- else
|
||
- timer->io_base = OMAP2_IO_ADDRESS(timer->phys_base);
|
||
+
|
||
+ /* Static mapping, never released */
|
||
+ timer->io_base = ioremap(timer->phys_base, map_size);
|
||
+ BUG_ON(!timer->io_base);
|
||
+
|
||
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
|
||
defined(CONFIG_ARCH_OMAP4)
|
||
if (cpu_class_is_omap2()) {
|
||
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
|
||
index 71ebd7f..14c3506 100644
|
||
--- a/arch/arm/plat-omap/gpio.c
|
||
+++ b/arch/arm/plat-omap/gpio.c
|
||
@@ -31,7 +31,7 @@
|
||
/*
|
||
* OMAP1510 GPIO registers
|
||
*/
|
||
-#define OMAP1510_GPIO_BASE OMAP1_IO_ADDRESS(0xfffce000)
|
||
+#define OMAP1510_GPIO_BASE 0xfffce000
|
||
#define OMAP1510_GPIO_DATA_INPUT 0x00
|
||
#define OMAP1510_GPIO_DATA_OUTPUT 0x04
|
||
#define OMAP1510_GPIO_DIR_CONTROL 0x08
|
||
@@ -45,10 +45,10 @@
|
||
/*
|
||
* OMAP1610 specific GPIO registers
|
||
*/
|
||
-#define OMAP1610_GPIO1_BASE OMAP1_IO_ADDRESS(0xfffbe400)
|
||
-#define OMAP1610_GPIO2_BASE OMAP1_IO_ADDRESS(0xfffbec00)
|
||
-#define OMAP1610_GPIO3_BASE OMAP1_IO_ADDRESS(0xfffbb400)
|
||
-#define OMAP1610_GPIO4_BASE OMAP1_IO_ADDRESS(0xfffbbc00)
|
||
+#define OMAP1610_GPIO1_BASE 0xfffbe400
|
||
+#define OMAP1610_GPIO2_BASE 0xfffbec00
|
||
+#define OMAP1610_GPIO3_BASE 0xfffbb400
|
||
+#define OMAP1610_GPIO4_BASE 0xfffbbc00
|
||
#define OMAP1610_GPIO_REVISION 0x0000
|
||
#define OMAP1610_GPIO_SYSCONFIG 0x0010
|
||
#define OMAP1610_GPIO_SYSSTATUS 0x0014
|
||
@@ -68,52 +68,36 @@
|
||
#define OMAP1610_GPIO_SET_DATAOUT 0x00f0
|
||
|
||
/*
|
||
- * OMAP730 specific GPIO registers
|
||
+ * OMAP7XX specific GPIO registers
|
||
*/
|
||
-#define OMAP730_GPIO1_BASE OMAP1_IO_ADDRESS(0xfffbc000)
|
||
-#define OMAP730_GPIO2_BASE OMAP1_IO_ADDRESS(0xfffbc800)
|
||
-#define OMAP730_GPIO3_BASE OMAP1_IO_ADDRESS(0xfffbd000)
|
||
-#define OMAP730_GPIO4_BASE OMAP1_IO_ADDRESS(0xfffbd800)
|
||
-#define OMAP730_GPIO5_BASE OMAP1_IO_ADDRESS(0xfffbe000)
|
||
-#define OMAP730_GPIO6_BASE OMAP1_IO_ADDRESS(0xfffbe800)
|
||
-#define OMAP730_GPIO_DATA_INPUT 0x00
|
||
-#define OMAP730_GPIO_DATA_OUTPUT 0x04
|
||
-#define OMAP730_GPIO_DIR_CONTROL 0x08
|
||
-#define OMAP730_GPIO_INT_CONTROL 0x0c
|
||
-#define OMAP730_GPIO_INT_MASK 0x10
|
||
-#define OMAP730_GPIO_INT_STATUS 0x14
|
||
-
|
||
-/*
|
||
- * OMAP850 specific GPIO registers
|
||
- */
|
||
-#define OMAP850_GPIO1_BASE OMAP1_IO_ADDRESS(0xfffbc000)
|
||
-#define OMAP850_GPIO2_BASE OMAP1_IO_ADDRESS(0xfffbc800)
|
||
-#define OMAP850_GPIO3_BASE OMAP1_IO_ADDRESS(0xfffbd000)
|
||
-#define OMAP850_GPIO4_BASE OMAP1_IO_ADDRESS(0xfffbd800)
|
||
-#define OMAP850_GPIO5_BASE OMAP1_IO_ADDRESS(0xfffbe000)
|
||
-#define OMAP850_GPIO6_BASE OMAP1_IO_ADDRESS(0xfffbe800)
|
||
-#define OMAP850_GPIO_DATA_INPUT 0x00
|
||
-#define OMAP850_GPIO_DATA_OUTPUT 0x04
|
||
-#define OMAP850_GPIO_DIR_CONTROL 0x08
|
||
-#define OMAP850_GPIO_INT_CONTROL 0x0c
|
||
-#define OMAP850_GPIO_INT_MASK 0x10
|
||
-#define OMAP850_GPIO_INT_STATUS 0x14
|
||
-
|
||
-#define OMAP1_MPUIO_VBASE OMAP1_IO_ADDRESS(OMAP1_MPUIO_BASE)
|
||
+#define OMAP7XX_GPIO1_BASE 0xfffbc000
|
||
+#define OMAP7XX_GPIO2_BASE 0xfffbc800
|
||
+#define OMAP7XX_GPIO3_BASE 0xfffbd000
|
||
+#define OMAP7XX_GPIO4_BASE 0xfffbd800
|
||
+#define OMAP7XX_GPIO5_BASE 0xfffbe000
|
||
+#define OMAP7XX_GPIO6_BASE 0xfffbe800
|
||
+#define OMAP7XX_GPIO_DATA_INPUT 0x00
|
||
+#define OMAP7XX_GPIO_DATA_OUTPUT 0x04
|
||
+#define OMAP7XX_GPIO_DIR_CONTROL 0x08
|
||
+#define OMAP7XX_GPIO_INT_CONTROL 0x0c
|
||
+#define OMAP7XX_GPIO_INT_MASK 0x10
|
||
+#define OMAP7XX_GPIO_INT_STATUS 0x14
|
||
+
|
||
+#define OMAP1_MPUIO_VBASE OMAP1_MPUIO_BASE
|
||
|
||
/*
|
||
* omap24xx specific GPIO registers
|
||
*/
|
||
-#define OMAP242X_GPIO1_BASE OMAP2_IO_ADDRESS(0x48018000)
|
||
-#define OMAP242X_GPIO2_BASE OMAP2_IO_ADDRESS(0x4801a000)
|
||
-#define OMAP242X_GPIO3_BASE OMAP2_IO_ADDRESS(0x4801c000)
|
||
-#define OMAP242X_GPIO4_BASE OMAP2_IO_ADDRESS(0x4801e000)
|
||
+#define OMAP242X_GPIO1_BASE 0x48018000
|
||
+#define OMAP242X_GPIO2_BASE 0x4801a000
|
||
+#define OMAP242X_GPIO3_BASE 0x4801c000
|
||
+#define OMAP242X_GPIO4_BASE 0x4801e000
|
||
|
||
-#define OMAP243X_GPIO1_BASE OMAP2_IO_ADDRESS(0x4900C000)
|
||
-#define OMAP243X_GPIO2_BASE OMAP2_IO_ADDRESS(0x4900E000)
|
||
-#define OMAP243X_GPIO3_BASE OMAP2_IO_ADDRESS(0x49010000)
|
||
-#define OMAP243X_GPIO4_BASE OMAP2_IO_ADDRESS(0x49012000)
|
||
-#define OMAP243X_GPIO5_BASE OMAP2_IO_ADDRESS(0x480B6000)
|
||
+#define OMAP243X_GPIO1_BASE 0x4900C000
|
||
+#define OMAP243X_GPIO2_BASE 0x4900E000
|
||
+#define OMAP243X_GPIO3_BASE 0x49010000
|
||
+#define OMAP243X_GPIO4_BASE 0x49012000
|
||
+#define OMAP243X_GPIO5_BASE 0x480B6000
|
||
|
||
#define OMAP24XX_GPIO_REVISION 0x0000
|
||
#define OMAP24XX_GPIO_SYSCONFIG 0x0010
|
||
@@ -170,24 +154,25 @@
|
||
* omap34xx specific GPIO registers
|
||
*/
|
||
|
||
-#define OMAP34XX_GPIO1_BASE OMAP2_IO_ADDRESS(0x48310000)
|
||
-#define OMAP34XX_GPIO2_BASE OMAP2_IO_ADDRESS(0x49050000)
|
||
-#define OMAP34XX_GPIO3_BASE OMAP2_IO_ADDRESS(0x49052000)
|
||
-#define OMAP34XX_GPIO4_BASE OMAP2_IO_ADDRESS(0x49054000)
|
||
-#define OMAP34XX_GPIO5_BASE OMAP2_IO_ADDRESS(0x49056000)
|
||
-#define OMAP34XX_GPIO6_BASE OMAP2_IO_ADDRESS(0x49058000)
|
||
+#define OMAP34XX_GPIO1_BASE 0x48310000
|
||
+#define OMAP34XX_GPIO2_BASE 0x49050000
|
||
+#define OMAP34XX_GPIO3_BASE 0x49052000
|
||
+#define OMAP34XX_GPIO4_BASE 0x49054000
|
||
+#define OMAP34XX_GPIO5_BASE 0x49056000
|
||
+#define OMAP34XX_GPIO6_BASE 0x49058000
|
||
|
||
/*
|
||
* OMAP44XX specific GPIO registers
|
||
*/
|
||
-#define OMAP44XX_GPIO1_BASE OMAP2_IO_ADDRESS(0x4a310000)
|
||
-#define OMAP44XX_GPIO2_BASE OMAP2_IO_ADDRESS(0x48055000)
|
||
-#define OMAP44XX_GPIO3_BASE OMAP2_IO_ADDRESS(0x48057000)
|
||
-#define OMAP44XX_GPIO4_BASE OMAP2_IO_ADDRESS(0x48059000)
|
||
-#define OMAP44XX_GPIO5_BASE OMAP2_IO_ADDRESS(0x4805B000)
|
||
-#define OMAP44XX_GPIO6_BASE OMAP2_IO_ADDRESS(0x4805D000)
|
||
+#define OMAP44XX_GPIO1_BASE 0x4a310000
|
||
+#define OMAP44XX_GPIO2_BASE 0x48055000
|
||
+#define OMAP44XX_GPIO3_BASE 0x48057000
|
||
+#define OMAP44XX_GPIO4_BASE 0x48059000
|
||
+#define OMAP44XX_GPIO5_BASE 0x4805B000
|
||
+#define OMAP44XX_GPIO6_BASE 0x4805D000
|
||
|
||
struct gpio_bank {
|
||
+ unsigned long pbase;
|
||
void __iomem *base;
|
||
u16 irq;
|
||
u16 virtual_irq_start;
|
||
@@ -215,96 +200,111 @@ struct gpio_bank {
|
||
#define METHOD_MPUIO 0
|
||
#define METHOD_GPIO_1510 1
|
||
#define METHOD_GPIO_1610 2
|
||
-#define METHOD_GPIO_730 3
|
||
-#define METHOD_GPIO_850 4
|
||
+#define METHOD_GPIO_7XX 3
|
||
#define METHOD_GPIO_24XX 5
|
||
|
||
#ifdef CONFIG_ARCH_OMAP16XX
|
||
static struct gpio_bank gpio_bank_1610[5] = {
|
||
- { OMAP1_MPUIO_VBASE, INT_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO},
|
||
- { OMAP1610_GPIO1_BASE, INT_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_1610 },
|
||
- { OMAP1610_GPIO2_BASE, INT_1610_GPIO_BANK2, IH_GPIO_BASE + 16, METHOD_GPIO_1610 },
|
||
- { OMAP1610_GPIO3_BASE, INT_1610_GPIO_BANK3, IH_GPIO_BASE + 32, METHOD_GPIO_1610 },
|
||
- { OMAP1610_GPIO4_BASE, INT_1610_GPIO_BANK4, IH_GPIO_BASE + 48, METHOD_GPIO_1610 },
|
||
+ { OMAP1_MPUIO_VBASE, 0, INT_MPUIO, IH_MPUIO_BASE,
|
||
+ METHOD_MPUIO },
|
||
+ { OMAP1610_GPIO1_BASE, 0, INT_GPIO_BANK1, IH_GPIO_BASE,
|
||
+ METHOD_GPIO_1610 },
|
||
+ { OMAP1610_GPIO2_BASE, 0, INT_1610_GPIO_BANK2, IH_GPIO_BASE + 16,
|
||
+ METHOD_GPIO_1610 },
|
||
+ { OMAP1610_GPIO3_BASE, 0, INT_1610_GPIO_BANK3, IH_GPIO_BASE + 32,
|
||
+ METHOD_GPIO_1610 },
|
||
+ { OMAP1610_GPIO4_BASE, 0, INT_1610_GPIO_BANK4, IH_GPIO_BASE + 48,
|
||
+ METHOD_GPIO_1610 },
|
||
};
|
||
#endif
|
||
|
||
#ifdef CONFIG_ARCH_OMAP15XX
|
||
static struct gpio_bank gpio_bank_1510[2] = {
|
||
- { OMAP1_MPUIO_VBASE, INT_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO },
|
||
- { OMAP1510_GPIO_BASE, INT_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_1510 }
|
||
-};
|
||
-#endif
|
||
-
|
||
-#ifdef CONFIG_ARCH_OMAP730
|
||
-static struct gpio_bank gpio_bank_730[7] = {
|
||
- { OMAP1_MPUIO_VBASE, INT_730_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO },
|
||
- { OMAP730_GPIO1_BASE, INT_730_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_730 },
|
||
- { OMAP730_GPIO2_BASE, INT_730_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_730 },
|
||
- { OMAP730_GPIO3_BASE, INT_730_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_730 },
|
||
- { OMAP730_GPIO4_BASE, INT_730_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_730 },
|
||
- { OMAP730_GPIO5_BASE, INT_730_GPIO_BANK5, IH_GPIO_BASE + 128, METHOD_GPIO_730 },
|
||
- { OMAP730_GPIO6_BASE, INT_730_GPIO_BANK6, IH_GPIO_BASE + 160, METHOD_GPIO_730 },
|
||
+ { OMAP1_MPUIO_VBASE, 0, INT_MPUIO, IH_MPUIO_BASE,
|
||
+ METHOD_MPUIO },
|
||
+ { OMAP1510_GPIO_BASE, 0, INT_GPIO_BANK1, IH_GPIO_BASE,
|
||
+ METHOD_GPIO_1510 }
|
||
};
|
||
#endif
|
||
|
||
-#ifdef CONFIG_ARCH_OMAP850
|
||
-static struct gpio_bank gpio_bank_850[7] = {
|
||
- { OMAP1_MPUIO_VBASE, INT_850_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO },
|
||
- { OMAP850_GPIO1_BASE, INT_850_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_850 },
|
||
- { OMAP850_GPIO2_BASE, INT_850_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_850 },
|
||
- { OMAP850_GPIO3_BASE, INT_850_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_850 },
|
||
- { OMAP850_GPIO4_BASE, INT_850_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_850 },
|
||
- { OMAP850_GPIO5_BASE, INT_850_GPIO_BANK5, IH_GPIO_BASE + 128, METHOD_GPIO_850 },
|
||
- { OMAP850_GPIO6_BASE, INT_850_GPIO_BANK6, IH_GPIO_BASE + 160, METHOD_GPIO_850 },
|
||
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
|
||
+static struct gpio_bank gpio_bank_7xx[7] = {
|
||
+ { OMAP1_MPUIO_VBASE, 0, INT_7XX_MPUIO, IH_MPUIO_BASE,
|
||
+ METHOD_MPUIO },
|
||
+ { OMAP7XX_GPIO1_BASE, 0, INT_7XX_GPIO_BANK1, IH_GPIO_BASE,
|
||
+ METHOD_GPIO_7XX },
|
||
+ { OMAP7XX_GPIO2_BASE, 0, INT_7XX_GPIO_BANK2, IH_GPIO_BASE + 32,
|
||
+ METHOD_GPIO_7XX },
|
||
+ { OMAP7XX_GPIO3_BASE, 0, INT_7XX_GPIO_BANK3, IH_GPIO_BASE + 64,
|
||
+ METHOD_GPIO_7XX },
|
||
+ { OMAP7XX_GPIO4_BASE, 0, INT_7XX_GPIO_BANK4, IH_GPIO_BASE + 96,
|
||
+ METHOD_GPIO_7XX },
|
||
+ { OMAP7XX_GPIO5_BASE, 0, INT_7XX_GPIO_BANK5, IH_GPIO_BASE + 128,
|
||
+ METHOD_GPIO_7XX },
|
||
+ { OMAP7XX_GPIO6_BASE, 0, INT_7XX_GPIO_BANK6, IH_GPIO_BASE + 160,
|
||
+ METHOD_GPIO_7XX },
|
||
};
|
||
#endif
|
||
|
||
-
|
||
#ifdef CONFIG_ARCH_OMAP24XX
|
||
|
||
static struct gpio_bank gpio_bank_242x[4] = {
|
||
- { OMAP242X_GPIO1_BASE, INT_24XX_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_24XX },
|
||
- { OMAP242X_GPIO2_BASE, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_24XX },
|
||
- { OMAP242X_GPIO3_BASE, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_24XX },
|
||
- { OMAP242X_GPIO4_BASE, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_24XX },
|
||
+ { OMAP242X_GPIO1_BASE, 0, INT_24XX_GPIO_BANK1, IH_GPIO_BASE,
|
||
+ METHOD_GPIO_24XX },
|
||
+ { OMAP242X_GPIO2_BASE, 0, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32,
|
||
+ METHOD_GPIO_24XX },
|
||
+ { OMAP242X_GPIO3_BASE, 0, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64,
|
||
+ METHOD_GPIO_24XX },
|
||
+ { OMAP242X_GPIO4_BASE, 0, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96,
|
||
+ METHOD_GPIO_24XX },
|
||
};
|
||
|
||
static struct gpio_bank gpio_bank_243x[5] = {
|
||
- { OMAP243X_GPIO1_BASE, INT_24XX_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_24XX },
|
||
- { OMAP243X_GPIO2_BASE, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_24XX },
|
||
- { OMAP243X_GPIO3_BASE, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_24XX },
|
||
- { OMAP243X_GPIO4_BASE, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_24XX },
|
||
- { OMAP243X_GPIO5_BASE, INT_24XX_GPIO_BANK5, IH_GPIO_BASE + 128, METHOD_GPIO_24XX },
|
||
+ { OMAP243X_GPIO1_BASE, 0, INT_24XX_GPIO_BANK1, IH_GPIO_BASE,
|
||
+ METHOD_GPIO_24XX },
|
||
+ { OMAP243X_GPIO2_BASE, 0, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32,
|
||
+ METHOD_GPIO_24XX },
|
||
+ { OMAP243X_GPIO3_BASE, 0, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64,
|
||
+ METHOD_GPIO_24XX },
|
||
+ { OMAP243X_GPIO4_BASE, 0, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96,
|
||
+ METHOD_GPIO_24XX },
|
||
+ { OMAP243X_GPIO5_BASE, 0, INT_24XX_GPIO_BANK5, IH_GPIO_BASE + 128,
|
||
+ METHOD_GPIO_24XX },
|
||
};
|
||
|
||
#endif
|
||
|
||
#ifdef CONFIG_ARCH_OMAP34XX
|
||
static struct gpio_bank gpio_bank_34xx[6] = {
|
||
- { OMAP34XX_GPIO1_BASE, INT_34XX_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_24XX },
|
||
- { OMAP34XX_GPIO2_BASE, INT_34XX_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_24XX },
|
||
- { OMAP34XX_GPIO3_BASE, INT_34XX_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_24XX },
|
||
- { OMAP34XX_GPIO4_BASE, INT_34XX_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_24XX },
|
||
- { OMAP34XX_GPIO5_BASE, INT_34XX_GPIO_BANK5, IH_GPIO_BASE + 128, METHOD_GPIO_24XX },
|
||
- { OMAP34XX_GPIO6_BASE, INT_34XX_GPIO_BANK6, IH_GPIO_BASE + 160, METHOD_GPIO_24XX },
|
||
+ { OMAP34XX_GPIO1_BASE, 0, INT_34XX_GPIO_BANK1, IH_GPIO_BASE,
|
||
+ METHOD_GPIO_24XX },
|
||
+ { OMAP34XX_GPIO2_BASE, 0, INT_34XX_GPIO_BANK2, IH_GPIO_BASE + 32,
|
||
+ METHOD_GPIO_24XX },
|
||
+ { OMAP34XX_GPIO3_BASE, 0, INT_34XX_GPIO_BANK3, IH_GPIO_BASE + 64,
|
||
+ METHOD_GPIO_24XX },
|
||
+ { OMAP34XX_GPIO4_BASE, 0, INT_34XX_GPIO_BANK4, IH_GPIO_BASE + 96,
|
||
+ METHOD_GPIO_24XX },
|
||
+ { OMAP34XX_GPIO5_BASE, 0, INT_34XX_GPIO_BANK5, IH_GPIO_BASE + 128,
|
||
+ METHOD_GPIO_24XX },
|
||
+ { OMAP34XX_GPIO6_BASE, 0, INT_34XX_GPIO_BANK6, IH_GPIO_BASE + 160,
|
||
+ METHOD_GPIO_24XX },
|
||
};
|
||
|
||
#endif
|
||
|
||
#ifdef CONFIG_ARCH_OMAP4
|
||
static struct gpio_bank gpio_bank_44xx[6] = {
|
||
- { OMAP44XX_GPIO1_BASE, INT_44XX_GPIO_BANK1, IH_GPIO_BASE, \
|
||
+ { OMAP44XX_GPIO1_BASE, 0, INT_44XX_GPIO_BANK1, IH_GPIO_BASE,
|
||
METHOD_GPIO_24XX },
|
||
- { OMAP44XX_GPIO2_BASE, INT_44XX_GPIO_BANK2, IH_GPIO_BASE + 32, \
|
||
+ { OMAP44XX_GPIO2_BASE, 0, INT_44XX_GPIO_BANK2, IH_GPIO_BASE + 32,
|
||
METHOD_GPIO_24XX },
|
||
- { OMAP44XX_GPIO3_BASE, INT_44XX_GPIO_BANK3, IH_GPIO_BASE + 64, \
|
||
+ { OMAP44XX_GPIO3_BASE, 0, INT_44XX_GPIO_BANK3, IH_GPIO_BASE + 64,
|
||
METHOD_GPIO_24XX },
|
||
- { OMAP44XX_GPIO4_BASE, INT_44XX_GPIO_BANK4, IH_GPIO_BASE + 96, \
|
||
+ { OMAP44XX_GPIO4_BASE, 0, INT_44XX_GPIO_BANK4, IH_GPIO_BASE + 96,
|
||
METHOD_GPIO_24XX },
|
||
- { OMAP44XX_GPIO5_BASE, INT_44XX_GPIO_BANK5, IH_GPIO_BASE + 128, \
|
||
+ { OMAP44XX_GPIO5_BASE, 0, INT_44XX_GPIO_BANK5, IH_GPIO_BASE + 128,
|
||
METHOD_GPIO_24XX },
|
||
- { OMAP44XX_GPIO6_BASE, INT_44XX_GPIO_BANK6, IH_GPIO_BASE + 160, \
|
||
+ { OMAP44XX_GPIO6_BASE, 0, INT_44XX_GPIO_BANK6, IH_GPIO_BASE + 160,
|
||
METHOD_GPIO_24XX },
|
||
};
|
||
|
||
@@ -373,7 +373,7 @@ static inline int gpio_valid(int gpio)
|
||
|
||
static int check_gpio(int gpio)
|
||
{
|
||
- if (unlikely(gpio_valid(gpio)) < 0) {
|
||
+ if (unlikely(gpio_valid(gpio) < 0)) {
|
||
printk(KERN_ERR "omap-gpio: invalid GPIO %d\n", gpio);
|
||
dump_stack();
|
||
return -1;
|
||
@@ -402,14 +402,9 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input)
|
||
reg += OMAP1610_GPIO_DIRECTION;
|
||
break;
|
||
#endif
|
||
-#ifdef CONFIG_ARCH_OMAP730
|
||
- case METHOD_GPIO_730:
|
||
- reg += OMAP730_GPIO_DIR_CONTROL;
|
||
- break;
|
||
-#endif
|
||
-#ifdef CONFIG_ARCH_OMAP850
|
||
- case METHOD_GPIO_850:
|
||
- reg += OMAP850_GPIO_DIR_CONTROL;
|
||
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
|
||
+ case METHOD_GPIO_7XX:
|
||
+ reg += OMAP7XX_GPIO_DIR_CONTROL;
|
||
break;
|
||
#endif
|
||
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
|
||
@@ -469,19 +464,9 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
|
||
l = 1 << gpio;
|
||
break;
|
||
#endif
|
||
-#ifdef CONFIG_ARCH_OMAP730
|
||
- case METHOD_GPIO_730:
|
||
- reg += OMAP730_GPIO_DATA_OUTPUT;
|
||
- l = __raw_readl(reg);
|
||
- if (enable)
|
||
- l |= 1 << gpio;
|
||
- else
|
||
- l &= ~(1 << gpio);
|
||
- break;
|
||
-#endif
|
||
-#ifdef CONFIG_ARCH_OMAP850
|
||
- case METHOD_GPIO_850:
|
||
- reg += OMAP850_GPIO_DATA_OUTPUT;
|
||
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
|
||
+ case METHOD_GPIO_7XX:
|
||
+ reg += OMAP7XX_GPIO_DATA_OUTPUT;
|
||
l = __raw_readl(reg);
|
||
if (enable)
|
||
l |= 1 << gpio;
|
||
@@ -537,14 +522,9 @@ static int _get_gpio_datain(struct gpio_bank *bank, int gpio)
|
||
reg += OMAP1610_GPIO_DATAIN;
|
||
break;
|
||
#endif
|
||
-#ifdef CONFIG_ARCH_OMAP730
|
||
- case METHOD_GPIO_730:
|
||
- reg += OMAP730_GPIO_DATA_INPUT;
|
||
- break;
|
||
-#endif
|
||
-#ifdef CONFIG_ARCH_OMAP850
|
||
- case METHOD_GPIO_850:
|
||
- reg += OMAP850_GPIO_DATA_INPUT;
|
||
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
|
||
+ case METHOD_GPIO_7XX:
|
||
+ reg += OMAP7XX_GPIO_DATA_INPUT;
|
||
break;
|
||
#endif
|
||
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
|
||
@@ -588,14 +568,9 @@ static int _get_gpio_dataout(struct gpio_bank *bank, int gpio)
|
||
reg += OMAP1610_GPIO_DATAOUT;
|
||
break;
|
||
#endif
|
||
-#ifdef CONFIG_ARCH_OMAP730
|
||
- case METHOD_GPIO_730:
|
||
- reg += OMAP730_GPIO_DATA_OUTPUT;
|
||
- break;
|
||
-#endif
|
||
-#ifdef CONFIG_ARCH_OMAP850
|
||
- case METHOD_GPIO_850:
|
||
- reg += OMAP850_GPIO_DATA_OUTPUT;
|
||
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
|
||
+ case METHOD_GPIO_7XX:
|
||
+ reg += OMAP7XX_GPIO_DATA_OUTPUT;
|
||
break;
|
||
#endif
|
||
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
|
||
@@ -797,21 +772,9 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
|
||
__raw_writel(1 << gpio, bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA);
|
||
break;
|
||
#endif
|
||
-#ifdef CONFIG_ARCH_OMAP730
|
||
- case METHOD_GPIO_730:
|
||
- reg += OMAP730_GPIO_INT_CONTROL;
|
||
- l = __raw_readl(reg);
|
||
- if (trigger & IRQ_TYPE_EDGE_RISING)
|
||
- l |= 1 << gpio;
|
||
- else if (trigger & IRQ_TYPE_EDGE_FALLING)
|
||
- l &= ~(1 << gpio);
|
||
- else
|
||
- goto bad;
|
||
- break;
|
||
-#endif
|
||
-#ifdef CONFIG_ARCH_OMAP850
|
||
- case METHOD_GPIO_850:
|
||
- reg += OMAP850_GPIO_INT_CONTROL;
|
||
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
|
||
+ case METHOD_GPIO_7XX:
|
||
+ reg += OMAP7XX_GPIO_INT_CONTROL;
|
||
l = __raw_readl(reg);
|
||
if (trigger & IRQ_TYPE_EDGE_RISING)
|
||
l |= 1 << gpio;
|
||
@@ -897,14 +860,9 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
|
||
reg += OMAP1610_GPIO_IRQSTATUS1;
|
||
break;
|
||
#endif
|
||
-#ifdef CONFIG_ARCH_OMAP730
|
||
- case METHOD_GPIO_730:
|
||
- reg += OMAP730_GPIO_INT_STATUS;
|
||
- break;
|
||
-#endif
|
||
-#ifdef CONFIG_ARCH_OMAP850
|
||
- case METHOD_GPIO_850:
|
||
- reg += OMAP850_GPIO_INT_STATUS;
|
||
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
|
||
+ case METHOD_GPIO_7XX:
|
||
+ reg += OMAP7XX_GPIO_INT_STATUS;
|
||
break;
|
||
#endif
|
||
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
|
||
@@ -971,16 +929,9 @@ static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank)
|
||
mask = 0xffff;
|
||
break;
|
||
#endif
|
||
-#ifdef CONFIG_ARCH_OMAP730
|
||
- case METHOD_GPIO_730:
|
||
- reg += OMAP730_GPIO_INT_MASK;
|
||
- mask = 0xffffffff;
|
||
- inv = 1;
|
||
- break;
|
||
-#endif
|
||
-#ifdef CONFIG_ARCH_OMAP850
|
||
- case METHOD_GPIO_850:
|
||
- reg += OMAP850_GPIO_INT_MASK;
|
||
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
|
||
+ case METHOD_GPIO_7XX:
|
||
+ reg += OMAP7XX_GPIO_INT_MASK;
|
||
mask = 0xffffffff;
|
||
inv = 1;
|
||
break;
|
||
@@ -1044,19 +995,9 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab
|
||
l = gpio_mask;
|
||
break;
|
||
#endif
|
||
-#ifdef CONFIG_ARCH_OMAP730
|
||
- case METHOD_GPIO_730:
|
||
- reg += OMAP730_GPIO_INT_MASK;
|
||
- l = __raw_readl(reg);
|
||
- if (enable)
|
||
- l &= ~(gpio_mask);
|
||
- else
|
||
- l |= gpio_mask;
|
||
- break;
|
||
-#endif
|
||
-#ifdef CONFIG_ARCH_OMAP850
|
||
- case METHOD_GPIO_850:
|
||
- reg += OMAP850_GPIO_INT_MASK;
|
||
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
|
||
+ case METHOD_GPIO_7XX:
|
||
+ reg += OMAP7XX_GPIO_INT_MASK;
|
||
l = __raw_readl(reg);
|
||
if (enable)
|
||
l &= ~(gpio_mask);
|
||
@@ -1249,13 +1190,9 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
|
||
if (bank->method == METHOD_GPIO_1610)
|
||
isr_reg = bank->base + OMAP1610_GPIO_IRQSTATUS1;
|
||
#endif
|
||
-#ifdef CONFIG_ARCH_OMAP730
|
||
- if (bank->method == METHOD_GPIO_730)
|
||
- isr_reg = bank->base + OMAP730_GPIO_INT_STATUS;
|
||
-#endif
|
||
-#ifdef CONFIG_ARCH_OMAP850
|
||
- if (bank->method == METHOD_GPIO_850)
|
||
- isr_reg = bank->base + OMAP850_GPIO_INT_STATUS;
|
||
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
|
||
+ if (bank->method == METHOD_GPIO_7XX)
|
||
+ isr_reg = bank->base + OMAP7XX_GPIO_INT_STATUS;
|
||
#endif
|
||
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
|
||
if (bank->method == METHOD_GPIO_24XX)
|
||
@@ -1524,11 +1461,8 @@ static int gpio_is_input(struct gpio_bank *bank, int mask)
|
||
case METHOD_GPIO_1610:
|
||
reg += OMAP1610_GPIO_DIRECTION;
|
||
break;
|
||
- case METHOD_GPIO_730:
|
||
- reg += OMAP730_GPIO_DIR_CONTROL;
|
||
- break;
|
||
- case METHOD_GPIO_850:
|
||
- reg += OMAP850_GPIO_DIR_CONTROL;
|
||
+ case METHOD_GPIO_7XX:
|
||
+ reg += OMAP7XX_GPIO_DIR_CONTROL;
|
||
break;
|
||
case METHOD_GPIO_24XX:
|
||
reg += OMAP24XX_GPIO_OE;
|
||
@@ -1607,6 +1541,23 @@ static struct clk * gpio5_fck;
|
||
static struct clk *gpio_iclks[OMAP34XX_NR_GPIOS];
|
||
#endif
|
||
|
||
+static void __init omap_gpio_show_rev(void)
|
||
+{
|
||
+ u32 rev;
|
||
+
|
||
+ if (cpu_is_omap16xx())
|
||
+ rev = __raw_readw(gpio_bank[1].base + OMAP1610_GPIO_REVISION);
|
||
+ else if (cpu_is_omap24xx() || cpu_is_omap34xx())
|
||
+ rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION);
|
||
+ else if (cpu_is_omap44xx())
|
||
+ rev = __raw_readl(gpio_bank[0].base + OMAP4_GPIO_REVISION);
|
||
+ else
|
||
+ return;
|
||
+
|
||
+ printk(KERN_INFO "OMAP GPIO hardware version %d.%d\n",
|
||
+ (rev >> 4) & 0x0f, rev & 0x0f);
|
||
+}
|
||
+
|
||
/* This lock class tells lockdep that GPIO irqs are in a different
|
||
* category than their parents, so it won't report false recursion.
|
||
*/
|
||
@@ -1617,6 +1568,7 @@ static int __init _omap_gpio_init(void)
|
||
int i;
|
||
int gpio = 0;
|
||
struct gpio_bank *bank;
|
||
+ int bank_size = SZ_8K; /* Module 4KB + L4 4KB except on omap1 */
|
||
char clk_name[11];
|
||
|
||
initialized = 1;
|
||
@@ -1679,77 +1631,45 @@ static int __init _omap_gpio_init(void)
|
||
|
||
#ifdef CONFIG_ARCH_OMAP15XX
|
||
if (cpu_is_omap15xx()) {
|
||
- printk(KERN_INFO "OMAP1510 GPIO hardware\n");
|
||
gpio_bank_count = 2;
|
||
gpio_bank = gpio_bank_1510;
|
||
+ bank_size = SZ_2K;
|
||
}
|
||
#endif
|
||
#if defined(CONFIG_ARCH_OMAP16XX)
|
||
if (cpu_is_omap16xx()) {
|
||
- u32 rev;
|
||
-
|
||
gpio_bank_count = 5;
|
||
gpio_bank = gpio_bank_1610;
|
||
- rev = __raw_readw(gpio_bank[1].base + OMAP1610_GPIO_REVISION);
|
||
- printk(KERN_INFO "OMAP GPIO hardware version %d.%d\n",
|
||
- (rev >> 4) & 0x0f, rev & 0x0f);
|
||
+ bank_size = SZ_2K;
|
||
}
|
||
#endif
|
||
-#ifdef CONFIG_ARCH_OMAP730
|
||
- if (cpu_is_omap730()) {
|
||
- printk(KERN_INFO "OMAP730 GPIO hardware\n");
|
||
- gpio_bank_count = 7;
|
||
- gpio_bank = gpio_bank_730;
|
||
- }
|
||
-#endif
|
||
-#ifdef CONFIG_ARCH_OMAP850
|
||
- if (cpu_is_omap850()) {
|
||
- printk(KERN_INFO "OMAP850 GPIO hardware\n");
|
||
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
|
||
+ if (cpu_is_omap7xx()) {
|
||
gpio_bank_count = 7;
|
||
- gpio_bank = gpio_bank_850;
|
||
+ gpio_bank = gpio_bank_7xx;
|
||
+ bank_size = SZ_2K;
|
||
}
|
||
#endif
|
||
-
|
||
#ifdef CONFIG_ARCH_OMAP24XX
|
||
if (cpu_is_omap242x()) {
|
||
- int rev;
|
||
-
|
||
gpio_bank_count = 4;
|
||
gpio_bank = gpio_bank_242x;
|
||
- rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION);
|
||
- printk(KERN_INFO "OMAP242x GPIO hardware version %d.%d\n",
|
||
- (rev >> 4) & 0x0f, rev & 0x0f);
|
||
}
|
||
if (cpu_is_omap243x()) {
|
||
- int rev;
|
||
-
|
||
gpio_bank_count = 5;
|
||
gpio_bank = gpio_bank_243x;
|
||
- rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION);
|
||
- printk(KERN_INFO "OMAP243x GPIO hardware version %d.%d\n",
|
||
- (rev >> 4) & 0x0f, rev & 0x0f);
|
||
}
|
||
#endif
|
||
#ifdef CONFIG_ARCH_OMAP34XX
|
||
if (cpu_is_omap34xx()) {
|
||
- int rev;
|
||
-
|
||
gpio_bank_count = OMAP34XX_NR_GPIOS;
|
||
gpio_bank = gpio_bank_34xx;
|
||
- rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION);
|
||
- printk(KERN_INFO "OMAP34xx GPIO hardware version %d.%d\n",
|
||
- (rev >> 4) & 0x0f, rev & 0x0f);
|
||
}
|
||
#endif
|
||
#ifdef CONFIG_ARCH_OMAP4
|
||
if (cpu_is_omap44xx()) {
|
||
- int rev;
|
||
-
|
||
gpio_bank_count = OMAP34XX_NR_GPIOS;
|
||
gpio_bank = gpio_bank_44xx;
|
||
- rev = __raw_readl(gpio_bank[0].base + OMAP4_GPIO_REVISION);
|
||
- printk(KERN_INFO "OMAP44xx GPIO hardware version %d.%d\n",
|
||
- (rev >> 4) & 0x0f, rev & 0x0f);
|
||
}
|
||
#endif
|
||
for (i = 0; i < gpio_bank_count; i++) {
|
||
@@ -1757,6 +1677,14 @@ static int __init _omap_gpio_init(void)
|
||
|
||
bank = &gpio_bank[i];
|
||
spin_lock_init(&bank->lock);
|
||
+
|
||
+ /* Static mapping, never released */
|
||
+ bank->base = ioremap(bank->pbase, bank_size);
|
||
+ if (!bank->base) {
|
||
+ printk(KERN_ERR "Could not ioremap gpio bank%i\n", i);
|
||
+ continue;
|
||
+ }
|
||
+
|
||
if (bank_is_mpuio(bank))
|
||
__raw_writew(0xffff, bank->base + OMAP_MPUIO_GPIO_MASKIT);
|
||
if (cpu_is_omap15xx() && bank->method == METHOD_GPIO_1510) {
|
||
@@ -1768,11 +1696,11 @@ static int __init _omap_gpio_init(void)
|
||
__raw_writew(0xffff, bank->base + OMAP1610_GPIO_IRQSTATUS1);
|
||
__raw_writew(0x0014, bank->base + OMAP1610_GPIO_SYSCONFIG);
|
||
}
|
||
- if (cpu_is_omap7xx() && bank->method == METHOD_GPIO_730) {
|
||
- __raw_writel(0xffffffff, bank->base + OMAP730_GPIO_INT_MASK);
|
||
- __raw_writel(0x00000000, bank->base + OMAP730_GPIO_INT_STATUS);
|
||
+ if (cpu_is_omap7xx() && bank->method == METHOD_GPIO_7XX) {
|
||
+ __raw_writel(0xffffffff, bank->base + OMAP7XX_GPIO_INT_MASK);
|
||
+ __raw_writel(0x00000000, bank->base + OMAP7XX_GPIO_INT_STATUS);
|
||
|
||
- gpio_count = 32; /* 730 has 32-bit GPIOs */
|
||
+ gpio_count = 32; /* 7xx has 32-bit GPIOs */
|
||
}
|
||
|
||
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
|
||
@@ -1862,6 +1790,8 @@ static int __init _omap_gpio_init(void)
|
||
if (cpu_is_omap34xx())
|
||
omap_writel(1 << 0, 0x48306814);
|
||
|
||
+ omap_gpio_show_rev();
|
||
+
|
||
return 0;
|
||
}
|
||
|
||
@@ -2160,8 +2090,7 @@ static int dbg_gpio_show(struct seq_file *s, void *unused)
|
||
|
||
if (bank_is_mpuio(bank))
|
||
gpio = OMAP_MPUIO(0);
|
||
- else if (cpu_class_is_omap2() || cpu_is_omap730() ||
|
||
- cpu_is_omap850())
|
||
+ else if (cpu_class_is_omap2() || cpu_is_omap7xx())
|
||
bankwidth = 32;
|
||
|
||
for (j = 0; j < bankwidth; j++, gpio++, mask <<= 1) {
|
||
diff --git a/arch/arm/plat-omap/include/mach/control.h b/arch/arm/plat-omap/include/mach/control.h
|
||
index 826d317..fdb6300 100644
|
||
--- a/arch/arm/plat-omap/include/mach/control.h
|
||
+++ b/arch/arm/plat-omap/include/mach/control.h
|
||
@@ -20,15 +20,18 @@
|
||
|
||
#ifndef __ASSEMBLY__
|
||
#define OMAP242X_CTRL_REGADDR(reg) \
|
||
- OMAP2_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
|
||
+ OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
|
||
#define OMAP243X_CTRL_REGADDR(reg) \
|
||
- OMAP2_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
|
||
+ OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
|
||
#define OMAP343X_CTRL_REGADDR(reg) \
|
||
- OMAP2_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
|
||
+ OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
|
||
#else
|
||
-#define OMAP242X_CTRL_REGADDR(reg) OMAP2_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
|
||
-#define OMAP243X_CTRL_REGADDR(reg) OMAP2_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
|
||
-#define OMAP343X_CTRL_REGADDR(reg) OMAP2_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
|
||
+#define OMAP242X_CTRL_REGADDR(reg) \
|
||
+ OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
|
||
+#define OMAP243X_CTRL_REGADDR(reg) \
|
||
+ OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
|
||
+#define OMAP343X_CTRL_REGADDR(reg) \
|
||
+ OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
|
||
#endif /* __ASSEMBLY__ */
|
||
|
||
/*
|
||
@@ -202,6 +205,40 @@
|
||
#define OMAP3_PADCONF_WAKEUPEVENT0 (1 << 15)
|
||
#define OMAP3_PADCONF_WAKEUPENABLE0 (1 << 14)
|
||
|
||
+/*
|
||
+ * CONTROL OMAP STATUS register to identify OMAP3 features
|
||
+ */
|
||
+#define OMAP3_CONTROL_OMAP_STATUS 0x044c
|
||
+
|
||
+#define OMAP3_SGX_SHIFT 13
|
||
+#define OMAP3_SGX_MASK (3 << OMAP3_SGX_SHIFT)
|
||
+#define FEAT_SGX_FULL 0
|
||
+#define FEAT_SGX_HALF 1
|
||
+#define FEAT_SGX_NONE 2
|
||
+
|
||
+#define OMAP3_IVA_SHIFT 12
|
||
+#define OMAP3_IVA_MASK (1 << OMAP3_SGX_SHIFT)
|
||
+#define FEAT_IVA 0
|
||
+#define FEAT_IVA_NONE 1
|
||
+
|
||
+#define OMAP3_L2CACHE_SHIFT 10
|
||
+#define OMAP3_L2CACHE_MASK (3 << OMAP3_L2CACHE_SHIFT)
|
||
+#define FEAT_L2CACHE_NONE 0
|
||
+#define FEAT_L2CACHE_64KB 1
|
||
+#define FEAT_L2CACHE_128KB 2
|
||
+#define FEAT_L2CACHE_256KB 3
|
||
+
|
||
+#define OMAP3_ISP_SHIFT 5
|
||
+#define OMAP3_ISP_MASK (1<< OMAP3_ISP_SHIFT)
|
||
+#define FEAT_ISP 0
|
||
+#define FEAT_ISP_NONE 1
|
||
+
|
||
+#define OMAP3_NEON_SHIFT 4
|
||
+#define OMAP3_NEON_MASK (1<< OMAP3_NEON_SHIFT)
|
||
+#define FEAT_NEON 0
|
||
+#define FEAT_NEON_NONE 1
|
||
+
|
||
+
|
||
#ifndef __ASSEMBLY__
|
||
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
|
||
defined(CONFIG_ARCH_OMAP4)
|
||
diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/mach/cpu.h
|
||
index f129efb..7cb0556 100644
|
||
--- a/arch/arm/plat-omap/include/mach/cpu.h
|
||
+++ b/arch/arm/plat-omap/include/mach/cpu.h
|
||
@@ -30,6 +30,8 @@
|
||
#ifndef __ASM_ARCH_OMAP_CPU_H
|
||
#define __ASM_ARCH_OMAP_CPU_H
|
||
|
||
+#include <linux/bitops.h>
|
||
+
|
||
/*
|
||
* Omap device type i.e. EMU/HS/TST/GP/BAD
|
||
*/
|
||
@@ -57,6 +59,23 @@ struct omap_chip_id {
|
||
unsigned int omap_rev(void);
|
||
|
||
/*
|
||
+ * Define CPU revision bits
|
||
+ *
|
||
+ * Verbose meaning of the revision bits may be different for a silicon
|
||
+ * family. This difference can be handled separately.
|
||
+ */
|
||
+#define OMAP_REVBITS_00 0x00
|
||
+#define OMAP_REVBITS_10 0x10
|
||
+#define OMAP_REVBITS_20 0x20
|
||
+#define OMAP_REVBITS_30 0x30
|
||
+#define OMAP_REVBITS_40 0x40
|
||
+
|
||
+/*
|
||
+ * Get the CPU revision for OMAP devices
|
||
+ */
|
||
+#define GET_OMAP_REVISION() ((omap_rev() >> 8) & 0xff)
|
||
+
|
||
+/*
|
||
* Test if multicore OMAP support is needed
|
||
*/
|
||
#undef MULTI_OMAP1
|
||
@@ -161,6 +180,7 @@ IS_OMAP_CLASS(34xx, 0x34)
|
||
IS_OMAP_SUBCLASS(242x, 0x242)
|
||
IS_OMAP_SUBCLASS(243x, 0x243)
|
||
IS_OMAP_SUBCLASS(343x, 0x343)
|
||
+IS_OMAP_SUBCLASS(363x, 0x363)
|
||
|
||
#define cpu_is_omap7xx() 0
|
||
#define cpu_is_omap15xx() 0
|
||
@@ -301,7 +321,12 @@ IS_OMAP_TYPE(3430, 0x3430)
|
||
#define cpu_is_omap2422() 0
|
||
#define cpu_is_omap2423() 0
|
||
#define cpu_is_omap2430() 0
|
||
+#define cpu_is_omap3503() 0
|
||
+#define cpu_is_omap3515() 0
|
||
+#define cpu_is_omap3525() 0
|
||
+#define cpu_is_omap3530() 0
|
||
#define cpu_is_omap3430() 0
|
||
+#define cpu_is_omap3630() 0
|
||
|
||
/*
|
||
* Whether we have MULTI_OMAP1 or not, we still need to distinguish
|
||
@@ -351,7 +376,23 @@ IS_OMAP_TYPE(3430, 0x3430)
|
||
|
||
#if defined(CONFIG_ARCH_OMAP34XX)
|
||
# undef cpu_is_omap3430
|
||
+# undef cpu_is_omap3503
|
||
+# undef cpu_is_omap3515
|
||
+# undef cpu_is_omap3525
|
||
+# undef cpu_is_omap3530
|
||
# define cpu_is_omap3430() is_omap3430()
|
||
+# define cpu_is_omap3503 (cpu_is_omap3430() && \
|
||
+ (!omap3_has_iva()) && \
|
||
+ (!omap3_has_sgx()))
|
||
+# define cpu_is_omap3515 (cpu_is_omap3430() && \
|
||
+ (omap3_has_iva()) && \
|
||
+ (!omap3_has_sgx()))
|
||
+# define cpu_is_omap3525 (cpu_is_omap3430() && \
|
||
+ (omap3_has_sgx()) && \
|
||
+ (!omap3_has_iva()))
|
||
+# define cpu_is_omap3530 (cpu_is_omap3430())
|
||
+# undef cpu_is_omap3630
|
||
+# define cpu_is_omap3630() is_omap363x()
|
||
#endif
|
||
|
||
# if defined(CONFIG_ARCH_OMAP4)
|
||
@@ -382,6 +423,14 @@ IS_OMAP_TYPE(3430, 0x3430)
|
||
#define OMAP3430_REV_ES3_0 0x34303034
|
||
#define OMAP3430_REV_ES3_1 0x34304034
|
||
|
||
+#define OMAP3630_REV_ES1_0 0x36300034
|
||
+
|
||
+#define OMAP35XX_CLASS 0x35000034
|
||
+#define OMAP3503_REV(v) (OMAP35XX_CLASS | (0x3503 << 16) | (v << 12))
|
||
+#define OMAP3515_REV(v) (OMAP35XX_CLASS | (0x3515 << 16) | (v << 12))
|
||
+#define OMAP3525_REV(v) (OMAP35XX_CLASS | (0x3525 << 16) | (v << 12))
|
||
+#define OMAP3530_REV(v) (OMAP35XX_CLASS | (0x3530 << 16) | (v << 12))
|
||
+
|
||
#define OMAP443X_CLASS 0x44300034
|
||
|
||
/*
|
||
@@ -423,4 +472,27 @@ IS_OMAP_TYPE(3430, 0x3430)
|
||
int omap_chip_is(struct omap_chip_id oci);
|
||
void omap2_check_revision(void);
|
||
|
||
+/*
|
||
+ * Runtime detection of OMAP3 features
|
||
+ */
|
||
+extern u32 omap3_features;
|
||
+
|
||
+#define OMAP3_HAS_L2CACHE BIT(0)
|
||
+#define OMAP3_HAS_IVA BIT(1)
|
||
+#define OMAP3_HAS_SGX BIT(2)
|
||
+#define OMAP3_HAS_NEON BIT(3)
|
||
+#define OMAP3_HAS_ISP BIT(4)
|
||
+
|
||
+#define OMAP3_HAS_FEATURE(feat,flag) \
|
||
+static inline unsigned int omap3_has_ ##feat(void) \
|
||
+{ \
|
||
+ return (omap3_features & OMAP3_HAS_ ##flag); \
|
||
+} \
|
||
+
|
||
+OMAP3_HAS_FEATURE(l2cache, L2CACHE)
|
||
+OMAP3_HAS_FEATURE(sgx, SGX)
|
||
+OMAP3_HAS_FEATURE(iva, IVA)
|
||
+OMAP3_HAS_FEATURE(neon, NEON)
|
||
+OMAP3_HAS_FEATURE(isp, ISP)
|
||
+
|
||
#endif
|
||
diff --git a/arch/arm/plat-omap/include/mach/debug-macro.S b/arch/arm/plat-omap/include/mach/debug-macro.S
|
||
index ac24050..63bb06d 100644
|
||
--- a/arch/arm/plat-omap/include/mach/debug-macro.S
|
||
+++ b/arch/arm/plat-omap/include/mach/debug-macro.S
|
||
@@ -27,7 +27,7 @@
|
||
|
||
#elif CONFIG_ARCH_OMAP2
|
||
moveq \rx, #0x48000000 @ physical base address
|
||
- movne \rx, #0xd8000000 @ virtual base
|
||
+ movne \rx, #0xfa000000 @ virtual base
|
||
orr \rx, \rx, #0x0006a000
|
||
#ifdef CONFIG_OMAP_LL_DEBUG_UART2
|
||
add \rx, \rx, #0x00002000 @ UART 2
|
||
@@ -38,7 +38,7 @@
|
||
|
||
#elif defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
|
||
moveq \rx, #0x48000000 @ physical base address
|
||
- movne \rx, #0xd8000000 @ virtual base
|
||
+ movne \rx, #0xfa000000 @ virtual base
|
||
orr \rx, \rx, #0x0006a000
|
||
#ifdef CONFIG_OMAP_LL_DEBUG_UART2
|
||
add \rx, \rx, #0x00002000 @ UART 2
|
||
diff --git a/arch/arm/plat-omap/include/mach/entry-macro.S b/arch/arm/plat-omap/include/mach/entry-macro.S
|
||
index a559299..2aea566 100644
|
||
--- a/arch/arm/plat-omap/include/mach/entry-macro.S
|
||
+++ b/arch/arm/plat-omap/include/mach/entry-macro.S
|
||
@@ -17,11 +17,11 @@
|
||
|
||
#if defined(CONFIG_ARCH_OMAP1)
|
||
|
||
-#if defined(CONFIG_ARCH_OMAP730) && \
|
||
+#if (defined(CONFIG_ARCH_OMAP730)||defined(CONFIG_ARCH_OMAP850)) && \
|
||
(defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX))
|
||
-#error "FIXME: OMAP730 doesn't support multiple-OMAP"
|
||
-#elif defined(CONFIG_ARCH_OMAP730)
|
||
-#define INT_IH2_IRQ INT_730_IH2_IRQ
|
||
+#error "FIXME: OMAP7XX doesn't support multiple-OMAP"
|
||
+#elif defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
|
||
+#define INT_IH2_IRQ INT_7XX_IH2_IRQ
|
||
#elif defined(CONFIG_ARCH_OMAP15XX)
|
||
#define INT_IH2_IRQ INT_1510_IH2_IRQ
|
||
#elif defined(CONFIG_ARCH_OMAP16XX)
|
||
@@ -68,9 +68,9 @@
|
||
|
||
/* REVISIT: This should be set dynamically if CONFIG_MULTI_OMAP2 is selected */
|
||
#if defined(CONFIG_ARCH_OMAP2420) || defined(CONFIG_ARCH_OMAP2430)
|
||
-#define OMAP2_VA_IC_BASE OMAP2_IO_ADDRESS(OMAP24XX_IC_BASE)
|
||
+#define OMAP2_VA_IC_BASE OMAP2_L4_IO_ADDRESS(OMAP24XX_IC_BASE)
|
||
#elif defined(CONFIG_ARCH_OMAP34XX)
|
||
-#define OMAP2_VA_IC_BASE OMAP2_IO_ADDRESS(OMAP34XX_IC_BASE)
|
||
+#define OMAP2_VA_IC_BASE OMAP2_L4_IO_ADDRESS(OMAP34XX_IC_BASE)
|
||
#endif
|
||
#if defined(CONFIG_ARCH_OMAP4)
|
||
#include <mach/omap44xx.h>
|
||
@@ -104,6 +104,8 @@
|
||
|
||
.endm
|
||
#else
|
||
+#define OMAP44XX_VA_GIC_CPU_BASE OMAP2_L4_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)
|
||
+
|
||
/*
|
||
* The interrupt numbering scheme is defined in the
|
||
* interrupt controller spec. To wit:
|
||
diff --git a/arch/arm/plat-omap/include/mach/hardware.h b/arch/arm/plat-omap/include/mach/hardware.h
|
||
index 26c1fbf..99c4241 100644
|
||
--- a/arch/arm/plat-omap/include/mach/hardware.h
|
||
+++ b/arch/arm/plat-omap/include/mach/hardware.h
|
||
@@ -280,7 +280,7 @@
|
||
* ---------------------------------------------------------------------------
|
||
*/
|
||
|
||
-#include "omap730.h"
|
||
+#include "omap7xx.h"
|
||
#include "omap1510.h"
|
||
#include "omap16xx.h"
|
||
#include "omap24xx.h"
|
||
diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h
|
||
index 8d32df3..7e5319f 100644
|
||
--- a/arch/arm/plat-omap/include/mach/io.h
|
||
+++ b/arch/arm/plat-omap/include/mach/io.h
|
||
@@ -63,8 +63,24 @@
|
||
#define OMAP1_IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */
|
||
#define OMAP1_IO_ADDRESS(pa) IOMEM((pa) - OMAP1_IO_OFFSET)
|
||
|
||
-#define OMAP2_IO_OFFSET 0x90000000
|
||
-#define OMAP2_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_IO_OFFSET) /* L3 and L4 */
|
||
+#define OMAP2_L3_IO_OFFSET 0x90000000
|
||
+#define OMAP2_L3_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_L3_IO_OFFSET) /* L3 */
|
||
+
|
||
+
|
||
+#define OMAP2_L4_IO_OFFSET 0xb2000000
|
||
+#define OMAP2_L4_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_L4_IO_OFFSET) /* L4 */
|
||
+
|
||
+#define OMAP4_L3_IO_OFFSET 0xb4000000
|
||
+#define OMAP4_L3_IO_ADDRESS(pa) IOMEM((pa) + OMAP4_L3_IO_OFFSET) /* L3 */
|
||
+
|
||
+#define OMAP4_L3_PER_IO_OFFSET 0xb1100000
|
||
+#define OMAP4_L3_PER_IO_ADDRESS(pa) IOMEM((pa) + OMAP4_L3_PER_IO_OFFSET)
|
||
+
|
||
+#define OMAP4_GPMC_IO_OFFSET 0xa9000000
|
||
+#define OMAP4_GPMC_IO_ADDRESS(pa) IOMEM((pa) + OMAP4_GPMC_IO_OFFSET)
|
||
+
|
||
+#define OMAP2_EMU_IO_OFFSET 0xaa800000 /* Emulation */
|
||
+#define OMAP2_EMU_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_EMU_IO_OFFSET)
|
||
|
||
/*
|
||
* ----------------------------------------------------------------------------
|
||
@@ -83,24 +99,27 @@
|
||
*/
|
||
|
||
/* We map both L3 and L4 on OMAP2 */
|
||
-#define L3_24XX_PHYS L3_24XX_BASE /* 0x68000000 */
|
||
-#define L3_24XX_VIRT 0xf8000000
|
||
+#define L3_24XX_PHYS L3_24XX_BASE /* 0x68000000 --> 0xf8000000*/
|
||
+#define L3_24XX_VIRT (L3_24XX_PHYS + OMAP2_L3_IO_OFFSET)
|
||
#define L3_24XX_SIZE SZ_1M /* 44kB of 128MB used, want 1MB sect */
|
||
-#define L4_24XX_PHYS L4_24XX_BASE /* 0x48000000 */
|
||
-#define L4_24XX_VIRT 0xd8000000
|
||
+#define L4_24XX_PHYS L4_24XX_BASE /* 0x48000000 --> 0xfa000000 */
|
||
+#define L4_24XX_VIRT (L4_24XX_PHYS + OMAP2_L4_IO_OFFSET)
|
||
#define L4_24XX_SIZE SZ_1M /* 1MB of 128MB used, want 1MB sect */
|
||
|
||
-#define L4_WK_243X_PHYS L4_WK_243X_BASE /* 0x49000000 */
|
||
-#define L4_WK_243X_VIRT 0xd9000000
|
||
+#define L4_WK_243X_PHYS L4_WK_243X_BASE /* 0x49000000 --> 0xfb000000 */
|
||
+#define L4_WK_243X_VIRT (L4_WK_243X_PHYS + OMAP2_L4_IO_OFFSET)
|
||
#define L4_WK_243X_SIZE SZ_1M
|
||
-#define OMAP243X_GPMC_PHYS OMAP243X_GPMC_BASE /* 0x49000000 */
|
||
-#define OMAP243X_GPMC_VIRT 0xFE000000
|
||
+#define OMAP243X_GPMC_PHYS OMAP243X_GPMC_BASE
|
||
+#define OMAP243X_GPMC_VIRT (OMAP243X_GPMC_PHYS + OMAP2_L3_IO_OFFSET)
|
||
+ /* 0x6e000000 --> 0xfe000000 */
|
||
#define OMAP243X_GPMC_SIZE SZ_1M
|
||
#define OMAP243X_SDRC_PHYS OMAP243X_SDRC_BASE
|
||
-#define OMAP243X_SDRC_VIRT 0xFD000000
|
||
+ /* 0x6D000000 --> 0xfd000000 */
|
||
+#define OMAP243X_SDRC_VIRT (OMAP243X_SDRC_PHYS + OMAP2_L3_IO_OFFSET)
|
||
#define OMAP243X_SDRC_SIZE SZ_1M
|
||
#define OMAP243X_SMS_PHYS OMAP243X_SMS_BASE
|
||
-#define OMAP243X_SMS_VIRT 0xFC000000
|
||
+ /* 0x6c000000 --> 0xfc000000 */
|
||
+#define OMAP243X_SMS_VIRT (OMAP243X_SMS_PHYS + OMAP2_L3_IO_OFFSET)
|
||
#define OMAP243X_SMS_SIZE SZ_1M
|
||
|
||
/* DSP */
|
||
@@ -121,12 +140,12 @@
|
||
*/
|
||
|
||
/* We map both L3 and L4 on OMAP3 */
|
||
-#define L3_34XX_PHYS L3_34XX_BASE /* 0x68000000 */
|
||
-#define L3_34XX_VIRT 0xf8000000
|
||
+#define L3_34XX_PHYS L3_34XX_BASE /* 0x68000000 --> 0xf8000000 */
|
||
+#define L3_34XX_VIRT (L3_34XX_PHYS + OMAP2_L3_IO_OFFSET)
|
||
#define L3_34XX_SIZE SZ_1M /* 44kB of 128MB used, want 1MB sect */
|
||
|
||
-#define L4_34XX_PHYS L4_34XX_BASE /* 0x48000000 */
|
||
-#define L4_34XX_VIRT 0xd8000000
|
||
+#define L4_34XX_PHYS L4_34XX_BASE /* 0x48000000 --> 0xfa000000 */
|
||
+#define L4_34XX_VIRT (L4_34XX_PHYS + OMAP2_L4_IO_OFFSET)
|
||
#define L4_34XX_SIZE SZ_4M /* 1MB of 128MB used, want 1MB sect */
|
||
|
||
/*
|
||
@@ -134,28 +153,33 @@
|
||
* VPOM3430 was not working for Int controller
|
||
*/
|
||
|
||
-#define L4_WK_34XX_PHYS L4_WK_34XX_BASE /* 0x48300000 */
|
||
-#define L4_WK_34XX_VIRT 0xd8300000
|
||
+#define L4_WK_34XX_PHYS L4_WK_34XX_BASE /* 0x48300000 --> 0xfa300000 */
|
||
+#define L4_WK_34XX_VIRT (L4_WK_34XX_PHYS + OMAP2_L4_IO_OFFSET)
|
||
#define L4_WK_34XX_SIZE SZ_1M
|
||
|
||
-#define L4_PER_34XX_PHYS L4_PER_34XX_BASE /* 0x49000000 */
|
||
-#define L4_PER_34XX_VIRT 0xd9000000
|
||
+#define L4_PER_34XX_PHYS L4_PER_34XX_BASE
|
||
+ /* 0x49000000 --> 0xfb000000 */
|
||
+#define L4_PER_34XX_VIRT (L4_PER_34XX_PHYS + OMAP2_L4_IO_OFFSET)
|
||
#define L4_PER_34XX_SIZE SZ_1M
|
||
|
||
-#define L4_EMU_34XX_PHYS L4_EMU_34XX_BASE /* 0x54000000 */
|
||
-#define L4_EMU_34XX_VIRT 0xe4000000
|
||
-#define L4_EMU_34XX_SIZE SZ_64M
|
||
+#define L4_EMU_34XX_PHYS L4_EMU_34XX_BASE
|
||
+ /* 0x54000000 --> 0xfe800000 */
|
||
+#define L4_EMU_34XX_VIRT (L4_EMU_34XX_PHYS + OMAP2_EMU_IO_OFFSET)
|
||
+#define L4_EMU_34XX_SIZE SZ_8M
|
||
|
||
-#define OMAP34XX_GPMC_PHYS OMAP34XX_GPMC_BASE /* 0x6E000000 */
|
||
-#define OMAP34XX_GPMC_VIRT 0xFE000000
|
||
+#define OMAP34XX_GPMC_PHYS OMAP34XX_GPMC_BASE
|
||
+ /* 0x6e000000 --> 0xfe000000 */
|
||
+#define OMAP34XX_GPMC_VIRT (OMAP34XX_GPMC_PHYS + OMAP2_L3_IO_OFFSET)
|
||
#define OMAP34XX_GPMC_SIZE SZ_1M
|
||
|
||
-#define OMAP343X_SMS_PHYS OMAP343X_SMS_BASE /* 0x6C000000 */
|
||
-#define OMAP343X_SMS_VIRT 0xFC000000
|
||
+#define OMAP343X_SMS_PHYS OMAP343X_SMS_BASE
|
||
+ /* 0x6c000000 --> 0xfc000000 */
|
||
+#define OMAP343X_SMS_VIRT (OMAP343X_SMS_PHYS + OMAP2_L3_IO_OFFSET)
|
||
#define OMAP343X_SMS_SIZE SZ_1M
|
||
|
||
-#define OMAP343X_SDRC_PHYS OMAP343X_SDRC_BASE /* 0x6D000000 */
|
||
-#define OMAP343X_SDRC_VIRT 0xFD000000
|
||
+#define OMAP343X_SDRC_PHYS OMAP343X_SDRC_BASE
|
||
+ /* 0x6D000000 --> 0xfd000000 */
|
||
+#define OMAP343X_SDRC_VIRT (OMAP343X_SDRC_PHYS + OMAP2_L3_IO_OFFSET)
|
||
#define OMAP343X_SDRC_SIZE SZ_1M
|
||
|
||
/* DSP */
|
||
@@ -176,32 +200,54 @@
|
||
*/
|
||
|
||
/* We map both L3 and L4 on OMAP4 */
|
||
-#define L3_44XX_PHYS L3_44XX_BASE
|
||
-#define L3_44XX_VIRT 0xd4000000
|
||
+#define L3_44XX_PHYS L3_44XX_BASE /* 0x44000000 --> 0xf8000000 */
|
||
+#define L3_44XX_VIRT (L3_44XX_PHYS + OMAP4_L3_IO_OFFSET)
|
||
#define L3_44XX_SIZE SZ_1M
|
||
|
||
-#define L4_44XX_PHYS L4_44XX_BASE
|
||
-#define L4_44XX_VIRT 0xda000000
|
||
+#define L4_44XX_PHYS L4_44XX_BASE /* 0x4a000000 --> 0xfc000000 */
|
||
+#define L4_44XX_VIRT (L4_44XX_PHYS + OMAP2_L4_IO_OFFSET)
|
||
#define L4_44XX_SIZE SZ_4M
|
||
|
||
|
||
-#define L4_WK_44XX_PHYS L4_WK_44XX_BASE
|
||
-#define L4_WK_44XX_VIRT 0xda300000
|
||
+#define L4_WK_44XX_PHYS L4_WK_44XX_BASE /* 0x4a300000 --> 0xfc300000 */
|
||
+#define L4_WK_44XX_VIRT (L4_WK_44XX_PHYS + OMAP2_L4_IO_OFFSET)
|
||
#define L4_WK_44XX_SIZE SZ_1M
|
||
|
||
#define L4_PER_44XX_PHYS L4_PER_44XX_BASE
|
||
-#define L4_PER_44XX_VIRT 0xd8000000
|
||
+ /* 0x48000000 --> 0xfa000000 */
|
||
+#define L4_PER_44XX_VIRT (L4_PER_44XX_PHYS + OMAP2_L4_IO_OFFSET)
|
||
#define L4_PER_44XX_SIZE SZ_4M
|
||
|
||
+#define L4_ABE_44XX_PHYS L4_ABE_44XX_BASE
|
||
+ /* 0x49000000 --> 0xfb000000 */
|
||
+#define L4_ABE_44XX_VIRT (L4_ABE_44XX_PHYS + OMAP2_L4_IO_OFFSET)
|
||
+#define L4_ABE_44XX_SIZE SZ_1M
|
||
+
|
||
#define L4_EMU_44XX_PHYS L4_EMU_44XX_BASE
|
||
-#define L4_EMU_44XX_VIRT 0xe4000000
|
||
-#define L4_EMU_44XX_SIZE SZ_64M
|
||
+ /* 0x54000000 --> 0xfe800000 */
|
||
+#define L4_EMU_44XX_VIRT (L4_EMU_44XX_PHYS + OMAP2_EMU_IO_OFFSET)
|
||
+#define L4_EMU_44XX_SIZE SZ_8M
|
||
|
||
#define OMAP44XX_GPMC_PHYS OMAP44XX_GPMC_BASE
|
||
-#define OMAP44XX_GPMC_VIRT 0xe0000000
|
||
+ /* 0x50000000 --> 0xf9000000 */
|
||
+#define OMAP44XX_GPMC_VIRT (OMAP44XX_GPMC_PHYS + OMAP4_GPMC_IO_OFFSET)
|
||
#define OMAP44XX_GPMC_SIZE SZ_1M
|
||
|
||
|
||
+#define OMAP44XX_EMIF1_PHYS OMAP44XX_EMIF1_BASE
|
||
+ /* 0x4c000000 --> 0xfd100000 */
|
||
+#define OMAP44XX_EMIF1_VIRT (OMAP44XX_EMIF1_PHYS + OMAP4_L3_PER_IO_OFFSET)
|
||
+#define OMAP44XX_EMIF1_SIZE SZ_1M
|
||
+
|
||
+#define OMAP44XX_EMIF2_PHYS OMAP44XX_EMIF2_BASE
|
||
+ /* 0x4d000000 --> 0xfd200000 */
|
||
+#define OMAP44XX_EMIF2_VIRT (OMAP44XX_EMIF2_PHYS + OMAP4_L3_PER_IO_OFFSET)
|
||
+#define OMAP44XX_EMIF2_SIZE SZ_1M
|
||
+
|
||
+#define OMAP44XX_DMM_PHYS OMAP44XX_DMM_BASE
|
||
+ /* 0x4e000000 --> 0xfd300000 */
|
||
+#define OMAP44XX_DMM_VIRT (OMAP44XX_DMM_PHYS + OMAP4_L3_PER_IO_OFFSET)
|
||
+#define OMAP44XX_DMM_SIZE SZ_1M
|
||
/*
|
||
* ----------------------------------------------------------------------------
|
||
* Omap specific register access
|
||
diff --git a/arch/arm/plat-omap/include/mach/irqs.h b/arch/arm/plat-omap/include/mach/irqs.h
|
||
index 28a1650..6a6d028 100644
|
||
--- a/arch/arm/plat-omap/include/mach/irqs.h
|
||
+++ b/arch/arm/plat-omap/include/mach/irqs.h
|
||
@@ -86,49 +86,26 @@
|
||
#define INT_1610_SSR_FIFO_0 29
|
||
|
||
/*
|
||
- * OMAP-730 specific IRQ numbers for interrupt handler 1
|
||
+ * OMAP-7xx specific IRQ numbers for interrupt handler 1
|
||
*/
|
||
-#define INT_730_IH2_FIQ 0
|
||
-#define INT_730_IH2_IRQ 1
|
||
-#define INT_730_USB_NON_ISO 2
|
||
-#define INT_730_USB_ISO 3
|
||
-#define INT_730_ICR 4
|
||
-#define INT_730_EAC 5
|
||
-#define INT_730_GPIO_BANK1 6
|
||
-#define INT_730_GPIO_BANK2 7
|
||
-#define INT_730_GPIO_BANK3 8
|
||
-#define INT_730_McBSP2TX 10
|
||
-#define INT_730_McBSP2RX 11
|
||
-#define INT_730_McBSP2RX_OVF 12
|
||
-#define INT_730_LCD_LINE 14
|
||
-#define INT_730_GSM_PROTECT 15
|
||
-#define INT_730_TIMER3 16
|
||
-#define INT_730_GPIO_BANK5 17
|
||
-#define INT_730_GPIO_BANK6 18
|
||
-#define INT_730_SPGIO_WR 29
|
||
-
|
||
-/*
|
||
- * OMAP-850 specific IRQ numbers for interrupt handler 1
|
||
- */
|
||
-#define INT_850_IH2_FIQ 0
|
||
-#define INT_850_IH2_IRQ 1
|
||
-#define INT_850_USB_NON_ISO 2
|
||
-#define INT_850_USB_ISO 3
|
||
-#define INT_850_ICR 4
|
||
-#define INT_850_EAC 5
|
||
-#define INT_850_GPIO_BANK1 6
|
||
-#define INT_850_GPIO_BANK2 7
|
||
-#define INT_850_GPIO_BANK3 8
|
||
-#define INT_850_McBSP2TX 10
|
||
-#define INT_850_McBSP2RX 11
|
||
-#define INT_850_McBSP2RX_OVF 12
|
||
-#define INT_850_LCD_LINE 14
|
||
-#define INT_850_GSM_PROTECT 15
|
||
-#define INT_850_TIMER3 16
|
||
-#define INT_850_GPIO_BANK5 17
|
||
-#define INT_850_GPIO_BANK6 18
|
||
-#define INT_850_SPGIO_WR 29
|
||
-
|
||
+#define INT_7XX_IH2_FIQ 0
|
||
+#define INT_7XX_IH2_IRQ 1
|
||
+#define INT_7XX_USB_NON_ISO 2
|
||
+#define INT_7XX_USB_ISO 3
|
||
+#define INT_7XX_ICR 4
|
||
+#define INT_7XX_EAC 5
|
||
+#define INT_7XX_GPIO_BANK1 6
|
||
+#define INT_7XX_GPIO_BANK2 7
|
||
+#define INT_7XX_GPIO_BANK3 8
|
||
+#define INT_7XX_McBSP2TX 10
|
||
+#define INT_7XX_McBSP2RX 11
|
||
+#define INT_7XX_McBSP2RX_OVF 12
|
||
+#define INT_7XX_LCD_LINE 14
|
||
+#define INT_7XX_GSM_PROTECT 15
|
||
+#define INT_7XX_TIMER3 16
|
||
+#define INT_7XX_GPIO_BANK5 17
|
||
+#define INT_7XX_GPIO_BANK6 18
|
||
+#define INT_7XX_SPGIO_WR 29
|
||
|
||
/*
|
||
* IRQ numbers for interrupt handler 2
|
||
@@ -206,120 +183,62 @@
|
||
#define INT_1610_SHA1MD5 (91 + IH2_BASE)
|
||
|
||
/*
|
||
- * OMAP-730 specific IRQ numbers for interrupt handler 2
|
||
- */
|
||
-#define INT_730_HW_ERRORS (0 + IH2_BASE)
|
||
-#define INT_730_NFIQ_PWR_FAIL (1 + IH2_BASE)
|
||
-#define INT_730_CFCD (2 + IH2_BASE)
|
||
-#define INT_730_CFIREQ (3 + IH2_BASE)
|
||
-#define INT_730_I2C (4 + IH2_BASE)
|
||
-#define INT_730_PCC (5 + IH2_BASE)
|
||
-#define INT_730_MPU_EXT_NIRQ (6 + IH2_BASE)
|
||
-#define INT_730_SPI_100K_1 (7 + IH2_BASE)
|
||
-#define INT_730_SYREN_SPI (8 + IH2_BASE)
|
||
-#define INT_730_VLYNQ (9 + IH2_BASE)
|
||
-#define INT_730_GPIO_BANK4 (10 + IH2_BASE)
|
||
-#define INT_730_McBSP1TX (11 + IH2_BASE)
|
||
-#define INT_730_McBSP1RX (12 + IH2_BASE)
|
||
-#define INT_730_McBSP1RX_OF (13 + IH2_BASE)
|
||
-#define INT_730_UART_MODEM_IRDA_2 (14 + IH2_BASE)
|
||
-#define INT_730_UART_MODEM_1 (15 + IH2_BASE)
|
||
-#define INT_730_MCSI (16 + IH2_BASE)
|
||
-#define INT_730_uWireTX (17 + IH2_BASE)
|
||
-#define INT_730_uWireRX (18 + IH2_BASE)
|
||
-#define INT_730_SMC_CD (19 + IH2_BASE)
|
||
-#define INT_730_SMC_IREQ (20 + IH2_BASE)
|
||
-#define INT_730_HDQ_1WIRE (21 + IH2_BASE)
|
||
-#define INT_730_TIMER32K (22 + IH2_BASE)
|
||
-#define INT_730_MMC_SDIO (23 + IH2_BASE)
|
||
-#define INT_730_UPLD (24 + IH2_BASE)
|
||
-#define INT_730_USB_HHC_1 (27 + IH2_BASE)
|
||
-#define INT_730_USB_HHC_2 (28 + IH2_BASE)
|
||
-#define INT_730_USB_GENI (29 + IH2_BASE)
|
||
-#define INT_730_USB_OTG (30 + IH2_BASE)
|
||
-#define INT_730_CAMERA_IF (31 + IH2_BASE)
|
||
-#define INT_730_RNG (32 + IH2_BASE)
|
||
-#define INT_730_DUAL_MODE_TIMER (33 + IH2_BASE)
|
||
-#define INT_730_DBB_RF_EN (34 + IH2_BASE)
|
||
-#define INT_730_MPUIO_KEYPAD (35 + IH2_BASE)
|
||
-#define INT_730_SHA1_MD5 (36 + IH2_BASE)
|
||
-#define INT_730_SPI_100K_2 (37 + IH2_BASE)
|
||
-#define INT_730_RNG_IDLE (38 + IH2_BASE)
|
||
-#define INT_730_MPUIO (39 + IH2_BASE)
|
||
-#define INT_730_LLPC_LCD_CTRL_CAN_BE_OFF (40 + IH2_BASE)
|
||
-#define INT_730_LLPC_OE_FALLING (41 + IH2_BASE)
|
||
-#define INT_730_LLPC_OE_RISING (42 + IH2_BASE)
|
||
-#define INT_730_LLPC_VSYNC (43 + IH2_BASE)
|
||
-#define INT_730_WAKE_UP_REQ (46 + IH2_BASE)
|
||
-#define INT_730_DMA_CH6 (53 + IH2_BASE)
|
||
-#define INT_730_DMA_CH7 (54 + IH2_BASE)
|
||
-#define INT_730_DMA_CH8 (55 + IH2_BASE)
|
||
-#define INT_730_DMA_CH9 (56 + IH2_BASE)
|
||
-#define INT_730_DMA_CH10 (57 + IH2_BASE)
|
||
-#define INT_730_DMA_CH11 (58 + IH2_BASE)
|
||
-#define INT_730_DMA_CH12 (59 + IH2_BASE)
|
||
-#define INT_730_DMA_CH13 (60 + IH2_BASE)
|
||
-#define INT_730_DMA_CH14 (61 + IH2_BASE)
|
||
-#define INT_730_DMA_CH15 (62 + IH2_BASE)
|
||
-#define INT_730_NAND (63 + IH2_BASE)
|
||
-
|
||
-/*
|
||
- * OMAP-850 specific IRQ numbers for interrupt handler 2
|
||
+ * OMAP-7xx specific IRQ numbers for interrupt handler 2
|
||
*/
|
||
-#define INT_850_HW_ERRORS (0 + IH2_BASE)
|
||
-#define INT_850_NFIQ_PWR_FAIL (1 + IH2_BASE)
|
||
-#define INT_850_CFCD (2 + IH2_BASE)
|
||
-#define INT_850_CFIREQ (3 + IH2_BASE)
|
||
-#define INT_850_I2C (4 + IH2_BASE)
|
||
-#define INT_850_PCC (5 + IH2_BASE)
|
||
-#define INT_850_MPU_EXT_NIRQ (6 + IH2_BASE)
|
||
-#define INT_850_SPI_100K_1 (7 + IH2_BASE)
|
||
-#define INT_850_SYREN_SPI (8 + IH2_BASE)
|
||
-#define INT_850_VLYNQ (9 + IH2_BASE)
|
||
-#define INT_850_GPIO_BANK4 (10 + IH2_BASE)
|
||
-#define INT_850_McBSP1TX (11 + IH2_BASE)
|
||
-#define INT_850_McBSP1RX (12 + IH2_BASE)
|
||
-#define INT_850_McBSP1RX_OF (13 + IH2_BASE)
|
||
-#define INT_850_UART_MODEM_IRDA_2 (14 + IH2_BASE)
|
||
-#define INT_850_UART_MODEM_1 (15 + IH2_BASE)
|
||
-#define INT_850_MCSI (16 + IH2_BASE)
|
||
-#define INT_850_uWireTX (17 + IH2_BASE)
|
||
-#define INT_850_uWireRX (18 + IH2_BASE)
|
||
-#define INT_850_SMC_CD (19 + IH2_BASE)
|
||
-#define INT_850_SMC_IREQ (20 + IH2_BASE)
|
||
-#define INT_850_HDQ_1WIRE (21 + IH2_BASE)
|
||
-#define INT_850_TIMER32K (22 + IH2_BASE)
|
||
-#define INT_850_MMC_SDIO (23 + IH2_BASE)
|
||
-#define INT_850_UPLD (24 + IH2_BASE)
|
||
-#define INT_850_USB_HHC_1 (27 + IH2_BASE)
|
||
-#define INT_850_USB_HHC_2 (28 + IH2_BASE)
|
||
-#define INT_850_USB_GENI (29 + IH2_BASE)
|
||
-#define INT_850_USB_OTG (30 + IH2_BASE)
|
||
-#define INT_850_CAMERA_IF (31 + IH2_BASE)
|
||
-#define INT_850_RNG (32 + IH2_BASE)
|
||
-#define INT_850_DUAL_MODE_TIMER (33 + IH2_BASE)
|
||
-#define INT_850_DBB_RF_EN (34 + IH2_BASE)
|
||
-#define INT_850_MPUIO_KEYPAD (35 + IH2_BASE)
|
||
-#define INT_850_SHA1_MD5 (36 + IH2_BASE)
|
||
-#define INT_850_SPI_100K_2 (37 + IH2_BASE)
|
||
-#define INT_850_RNG_IDLE (38 + IH2_BASE)
|
||
-#define INT_850_MPUIO (39 + IH2_BASE)
|
||
-#define INT_850_LLPC_LCD_CTRL_CAN_BE_OFF (40 + IH2_BASE)
|
||
-#define INT_850_LLPC_OE_FALLING (41 + IH2_BASE)
|
||
-#define INT_850_LLPC_OE_RISING (42 + IH2_BASE)
|
||
-#define INT_850_LLPC_VSYNC (43 + IH2_BASE)
|
||
-#define INT_850_WAKE_UP_REQ (46 + IH2_BASE)
|
||
-#define INT_850_DMA_CH6 (53 + IH2_BASE)
|
||
-#define INT_850_DMA_CH7 (54 + IH2_BASE)
|
||
-#define INT_850_DMA_CH8 (55 + IH2_BASE)
|
||
-#define INT_850_DMA_CH9 (56 + IH2_BASE)
|
||
-#define INT_850_DMA_CH10 (57 + IH2_BASE)
|
||
-#define INT_850_DMA_CH11 (58 + IH2_BASE)
|
||
-#define INT_850_DMA_CH12 (59 + IH2_BASE)
|
||
-#define INT_850_DMA_CH13 (60 + IH2_BASE)
|
||
-#define INT_850_DMA_CH14 (61 + IH2_BASE)
|
||
-#define INT_850_DMA_CH15 (62 + IH2_BASE)
|
||
-#define INT_850_NAND (63 + IH2_BASE)
|
||
+#define INT_7XX_HW_ERRORS (0 + IH2_BASE)
|
||
+#define INT_7XX_NFIQ_PWR_FAIL (1 + IH2_BASE)
|
||
+#define INT_7XX_CFCD (2 + IH2_BASE)
|
||
+#define INT_7XX_CFIREQ (3 + IH2_BASE)
|
||
+#define INT_7XX_I2C (4 + IH2_BASE)
|
||
+#define INT_7XX_PCC (5 + IH2_BASE)
|
||
+#define INT_7XX_MPU_EXT_NIRQ (6 + IH2_BASE)
|
||
+#define INT_7XX_SPI_100K_1 (7 + IH2_BASE)
|
||
+#define INT_7XX_SYREN_SPI (8 + IH2_BASE)
|
||
+#define INT_7XX_VLYNQ (9 + IH2_BASE)
|
||
+#define INT_7XX_GPIO_BANK4 (10 + IH2_BASE)
|
||
+#define INT_7XX_McBSP1TX (11 + IH2_BASE)
|
||
+#define INT_7XX_McBSP1RX (12 + IH2_BASE)
|
||
+#define INT_7XX_McBSP1RX_OF (13 + IH2_BASE)
|
||
+#define INT_7XX_UART_MODEM_IRDA_2 (14 + IH2_BASE)
|
||
+#define INT_7XX_UART_MODEM_1 (15 + IH2_BASE)
|
||
+#define INT_7XX_MCSI (16 + IH2_BASE)
|
||
+#define INT_7XX_uWireTX (17 + IH2_BASE)
|
||
+#define INT_7XX_uWireRX (18 + IH2_BASE)
|
||
+#define INT_7XX_SMC_CD (19 + IH2_BASE)
|
||
+#define INT_7XX_SMC_IREQ (20 + IH2_BASE)
|
||
+#define INT_7XX_HDQ_1WIRE (21 + IH2_BASE)
|
||
+#define INT_7XX_TIMER32K (22 + IH2_BASE)
|
||
+#define INT_7XX_MMC_SDIO (23 + IH2_BASE)
|
||
+#define INT_7XX_UPLD (24 + IH2_BASE)
|
||
+#define INT_7XX_USB_HHC_1 (27 + IH2_BASE)
|
||
+#define INT_7XX_USB_HHC_2 (28 + IH2_BASE)
|
||
+#define INT_7XX_USB_GENI (29 + IH2_BASE)
|
||
+#define INT_7XX_USB_OTG (30 + IH2_BASE)
|
||
+#define INT_7XX_CAMERA_IF (31 + IH2_BASE)
|
||
+#define INT_7XX_RNG (32 + IH2_BASE)
|
||
+#define INT_7XX_DUAL_MODE_TIMER (33 + IH2_BASE)
|
||
+#define INT_7XX_DBB_RF_EN (34 + IH2_BASE)
|
||
+#define INT_7XX_MPUIO_KEYPAD (35 + IH2_BASE)
|
||
+#define INT_7XX_SHA1_MD5 (36 + IH2_BASE)
|
||
+#define INT_7XX_SPI_100K_2 (37 + IH2_BASE)
|
||
+#define INT_7XX_RNG_IDLE (38 + IH2_BASE)
|
||
+#define INT_7XX_MPUIO (39 + IH2_BASE)
|
||
+#define INT_7XX_LLPC_LCD_CTRL_CAN_BE_OFF (40 + IH2_BASE)
|
||
+#define INT_7XX_LLPC_OE_FALLING (41 + IH2_BASE)
|
||
+#define INT_7XX_LLPC_OE_RISING (42 + IH2_BASE)
|
||
+#define INT_7XX_LLPC_VSYNC (43 + IH2_BASE)
|
||
+#define INT_7XX_WAKE_UP_REQ (46 + IH2_BASE)
|
||
+#define INT_7XX_DMA_CH6 (53 + IH2_BASE)
|
||
+#define INT_7XX_DMA_CH7 (54 + IH2_BASE)
|
||
+#define INT_7XX_DMA_CH8 (55 + IH2_BASE)
|
||
+#define INT_7XX_DMA_CH9 (56 + IH2_BASE)
|
||
+#define INT_7XX_DMA_CH10 (57 + IH2_BASE)
|
||
+#define INT_7XX_DMA_CH11 (58 + IH2_BASE)
|
||
+#define INT_7XX_DMA_CH12 (59 + IH2_BASE)
|
||
+#define INT_7XX_DMA_CH13 (60 + IH2_BASE)
|
||
+#define INT_7XX_DMA_CH14 (61 + IH2_BASE)
|
||
+#define INT_7XX_DMA_CH15 (62 + IH2_BASE)
|
||
+#define INT_7XX_NAND (63 + IH2_BASE)
|
||
|
||
#define INT_24XX_SYS_NIRQ 7
|
||
#define INT_24XX_SDMA_IRQ0 12
|
||
diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h
|
||
index e0d6eca..7e9cae3 100644
|
||
--- a/arch/arm/plat-omap/include/mach/mcbsp.h
|
||
+++ b/arch/arm/plat-omap/include/mach/mcbsp.h
|
||
@@ -30,8 +30,8 @@
|
||
#include <mach/hardware.h>
|
||
#include <mach/clock.h>
|
||
|
||
-#define OMAP730_MCBSP1_BASE 0xfffb1000
|
||
-#define OMAP730_MCBSP2_BASE 0xfffb1800
|
||
+#define OMAP7XX_MCBSP1_BASE 0xfffb1000
|
||
+#define OMAP7XX_MCBSP2_BASE 0xfffb1800
|
||
|
||
#define OMAP1510_MCBSP1_BASE 0xe1011800
|
||
#define OMAP1510_MCBSP2_BASE 0xfffb1000
|
||
@@ -58,7 +58,7 @@
|
||
#define OMAP44XX_MCBSP3_BASE 0x49026000
|
||
#define OMAP44XX_MCBSP4_BASE 0x48074000
|
||
|
||
-#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP730)
|
||
+#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
|
||
|
||
#define OMAP_MCBSP_REG_DRR2 0x00
|
||
#define OMAP_MCBSP_REG_DRR1 0x02
|
||
diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/mach/mux.h
|
||
index 0f49d2d..f3c1d8a 100644
|
||
--- a/arch/arm/plat-omap/include/mach/mux.h
|
||
+++ b/arch/arm/plat-omap/include/mach/mux.h
|
||
@@ -51,23 +51,13 @@
|
||
.pu_pd_reg = PU_PD_SEL_##reg, \
|
||
.pu_pd_val = status,
|
||
|
||
-#define MUX_REG_730(reg, mode_offset, mode) .mux_reg_name = "OMAP730_IO_CONF_"#reg, \
|
||
- .mux_reg = OMAP730_IO_CONF_##reg, \
|
||
+#define MUX_REG_7XX(reg, mode_offset, mode) .mux_reg_name = "OMAP7XX_IO_CONF_"#reg, \
|
||
+ .mux_reg = OMAP7XX_IO_CONF_##reg, \
|
||
.mask_offset = mode_offset, \
|
||
.mask = mode,
|
||
|
||
-#define PULL_REG_730(reg, bit, status) .pull_name = "OMAP730_IO_CONF_"#reg, \
|
||
- .pull_reg = OMAP730_IO_CONF_##reg, \
|
||
- .pull_bit = bit, \
|
||
- .pull_val = status,
|
||
-
|
||
-#define MUX_REG_850(reg, mode_offset, mode) .mux_reg_name = "OMAP850_IO_CONF_"#reg, \
|
||
- .mux_reg = OMAP850_IO_CONF_##reg, \
|
||
- .mask_offset = mode_offset, \
|
||
- .mask = mode,
|
||
-
|
||
-#define PULL_REG_850(reg, bit, status) .pull_name = "OMAP850_IO_CONF_"#reg, \
|
||
- .pull_reg = OMAP850_IO_CONF_##reg, \
|
||
+#define PULL_REG_7XX(reg, bit, status) .pull_name = "OMAP7XX_IO_CONF_"#reg, \
|
||
+ .pull_reg = OMAP7XX_IO_CONF_##reg, \
|
||
.pull_bit = bit, \
|
||
.pull_val = status,
|
||
|
||
@@ -84,21 +74,12 @@
|
||
#define PU_PD_REG(reg, status) .pu_pd_reg = PU_PD_SEL_##reg, \
|
||
.pu_pd_val = status,
|
||
|
||
-#define MUX_REG_730(reg, mode_offset, mode) \
|
||
- .mux_reg = OMAP730_IO_CONF_##reg, \
|
||
+#define MUX_REG_7XX(reg, mode_offset, mode) \
|
||
+ .mux_reg = OMAP7XX_IO_CONF_##reg, \
|
||
.mask_offset = mode_offset, \
|
||
.mask = mode,
|
||
|
||
-#define PULL_REG_730(reg, bit, status) .pull_reg = OMAP730_IO_CONF_##reg, \
|
||
- .pull_bit = bit, \
|
||
- .pull_val = status,
|
||
-
|
||
-#define MUX_REG_850(reg, mode_offset, mode) \
|
||
- .mux_reg = OMAP850_IO_CONF_##reg, \
|
||
- .mask_offset = mode_offset, \
|
||
- .mask = mode,
|
||
-
|
||
-#define PULL_REG_850(reg, bit, status) .pull_reg = OMAP850_IO_CONF_##reg, \
|
||
+#define PULL_REG_7XX(reg, bit, status) .pull_reg = OMAP7XX_IO_CONF_##reg, \
|
||
.pull_bit = bit, \
|
||
.pull_val = status,
|
||
|
||
@@ -118,32 +99,21 @@
|
||
|
||
/*
|
||
* OMAP730/850 has a slightly different config for the pin mux.
|
||
- * - config regs are the OMAP730_IO_CONF_x regs (see omap730.h) regs and
|
||
+ * - config regs are the OMAP7XX_IO_CONF_x regs (see omap730.h) regs and
|
||
* not the FUNC_MUX_CTRL_x regs from hardware.h
|
||
* - for pull-up/down, only has one enable bit which is is in the same register
|
||
* as mux config
|
||
*/
|
||
-#define MUX_CFG_730(desc, mux_reg, mode_offset, mode, \
|
||
+#define MUX_CFG_7XX(desc, mux_reg, mode_offset, mode, \
|
||
pull_bit, pull_status, debug_status)\
|
||
{ \
|
||
.name = desc, \
|
||
.debug = debug_status, \
|
||
- MUX_REG_730(mux_reg, mode_offset, mode) \
|
||
- PULL_REG_730(mux_reg, pull_bit, pull_status) \
|
||
+ MUX_REG_7XX(mux_reg, mode_offset, mode) \
|
||
+ PULL_REG_7XX(mux_reg, pull_bit, pull_status) \
|
||
PU_PD_REG(NA, 0) \
|
||
},
|
||
|
||
-#define MUX_CFG_850(desc, mux_reg, mode_offset, mode, \
|
||
- pull_bit, pull_status, debug_status)\
|
||
-{ \
|
||
- .name = desc, \
|
||
- .debug = debug_status, \
|
||
- MUX_REG_850(mux_reg, mode_offset, mode) \
|
||
- PULL_REG_850(mux_reg, pull_bit, pull_status) \
|
||
- PU_PD_REG(NA, 0) \
|
||
-},
|
||
-
|
||
-
|
||
#define MUX_CFG_24XX(desc, reg_offset, mode, \
|
||
pull_en, pull_mode, dbg) \
|
||
{ \
|
||
@@ -232,45 +202,25 @@ struct pin_config {
|
||
|
||
};
|
||
|
||
-enum omap730_index {
|
||
+enum omap7xx_index {
|
||
/* OMAP 730 keyboard */
|
||
- E2_730_KBR0,
|
||
- J7_730_KBR1,
|
||
- E1_730_KBR2,
|
||
- F3_730_KBR3,
|
||
- D2_730_KBR4,
|
||
- C2_730_KBC0,
|
||
- D3_730_KBC1,
|
||
- E4_730_KBC2,
|
||
- F4_730_KBC3,
|
||
- E3_730_KBC4,
|
||
-
|
||
- /* USB */
|
||
- AA17_730_USB_DM,
|
||
- W16_730_USB_PU_EN,
|
||
- W17_730_USB_VBUSI,
|
||
-};
|
||
-
|
||
-enum omap850_index {
|
||
- /* OMAP 850 keyboard */
|
||
- E2_850_KBR0,
|
||
- J7_850_KBR1,
|
||
- E1_850_KBR2,
|
||
- F3_850_KBR3,
|
||
- D2_850_KBR4,
|
||
- C2_850_KBC0,
|
||
- D3_850_KBC1,
|
||
- E4_850_KBC2,
|
||
- F4_850_KBC3,
|
||
- E3_850_KBC4,
|
||
+ E2_7XX_KBR0,
|
||
+ J7_7XX_KBR1,
|
||
+ E1_7XX_KBR2,
|
||
+ F3_7XX_KBR3,
|
||
+ D2_7XX_KBR4,
|
||
+ C2_7XX_KBC0,
|
||
+ D3_7XX_KBC1,
|
||
+ E4_7XX_KBC2,
|
||
+ F4_7XX_KBC3,
|
||
+ E3_7XX_KBC4,
|
||
|
||
/* USB */
|
||
- AA17_850_USB_DM,
|
||
- W16_850_USB_PU_EN,
|
||
- W17_850_USB_VBUSI,
|
||
+ AA17_7XX_USB_DM,
|
||
+ W16_7XX_USB_PU_EN,
|
||
+ W17_7XX_USB_VBUSI,
|
||
};
|
||
|
||
-
|
||
enum omap1xxx_index {
|
||
/* UART1 (BT_UART_GATING)*/
|
||
UART1_TX = 0,
|
||
diff --git a/arch/arm/plat-omap/include/mach/omap34xx.h b/arch/arm/plat-omap/include/mach/omap34xx.h
|
||
index f8d186a..4655707 100644
|
||
--- a/arch/arm/plat-omap/include/mach/omap34xx.h
|
||
+++ b/arch/arm/plat-omap/include/mach/omap34xx.h
|
||
@@ -74,8 +74,12 @@
|
||
|
||
#define OMAP34XX_IVA_INTC_BASE 0x40000000
|
||
#define OMAP34XX_HSUSB_OTG_BASE (L4_34XX_BASE + 0xAB000)
|
||
-#define OMAP34XX_HSUSB_HOST_BASE (L4_34XX_BASE + 0x64000)
|
||
#define OMAP34XX_USBTLL_BASE (L4_34XX_BASE + 0x62000)
|
||
+#define OMAP34XX_UHH_CONFIG_BASE (L4_34XX_BASE + 0x64000)
|
||
+#define OMAP34XX_OHCI_BASE (L4_34XX_BASE + 0x64400)
|
||
+#define OMAP34XX_EHCI_BASE (L4_34XX_BASE + 0x64800)
|
||
+#define OMAP34XX_SR1_BASE 0x480C9000
|
||
+#define OMAP34XX_SR2_BASE 0x480CB000
|
||
|
||
#define OMAP34XX_MAILBOX_BASE (L4_34XX_BASE + 0x94000)
|
||
|
||
diff --git a/arch/arm/plat-omap/include/mach/omap44xx.h b/arch/arm/plat-omap/include/mach/omap44xx.h
|
||
index b3ba5ac..3361897 100644
|
||
--- a/arch/arm/plat-omap/include/mach/omap44xx.h
|
||
+++ b/arch/arm/plat-omap/include/mach/omap44xx.h
|
||
@@ -22,6 +22,9 @@
|
||
#define L4_PER_44XX_BASE 0x48000000
|
||
#define L4_EMU_44XX_BASE 0x54000000
|
||
#define L3_44XX_BASE 0x44000000
|
||
+#define OMAP44XX_EMIF1_BASE 0x4c000000
|
||
+#define OMAP44XX_EMIF2_BASE 0x4d000000
|
||
+#define OMAP44XX_DMM_BASE 0x4e000000
|
||
#define OMAP4430_32KSYNCT_BASE 0x4a304000
|
||
#define OMAP4430_CM_BASE 0x4a004000
|
||
#define OMAP4430_PRM_BASE 0x48306000
|
||
@@ -33,14 +36,9 @@
|
||
#define IRQ_SIR_IRQ 0x0040
|
||
#define OMAP44XX_GIC_DIST_BASE 0x48241000
|
||
#define OMAP44XX_GIC_CPU_BASE 0x48240100
|
||
-#define OMAP44XX_VA_GIC_CPU_BASE OMAP2_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)
|
||
#define OMAP44XX_SCU_BASE 0x48240000
|
||
-#define OMAP44XX_VA_SCU_BASE OMAP2_IO_ADDRESS(OMAP44XX_SCU_BASE)
|
||
#define OMAP44XX_LOCAL_TWD_BASE 0x48240600
|
||
-#define OMAP44XX_VA_LOCAL_TWD_BASE OMAP2_IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE)
|
||
-#define OMAP44XX_LOCAL_TWD_SIZE 0x00000100
|
||
#define OMAP44XX_WKUPGEN_BASE 0x48281000
|
||
-#define OMAP44XX_VA_WKUPGEN_BASE OMAP2_IO_ADDRESS(OMAP44XX_WKUPGEN_BASE)
|
||
|
||
#endif /* __ASM_ARCH_OMAP44XX_H */
|
||
|
||
diff --git a/arch/arm/plat-omap/include/mach/omap7xx.h b/arch/arm/plat-omap/include/mach/omap7xx.h
|
||
new file mode 100644
|
||
index 0000000..53f5241
|
||
--- /dev/null
|
||
+++ b/arch/arm/plat-omap/include/mach/omap7xx.h
|
||
@@ -0,0 +1,104 @@
|
||
+/* arch/arm/plat-omap/include/mach/omap7xx.h
|
||
+ *
|
||
+ * Hardware definitions for TI OMAP7XX processor.
|
||
+ *
|
||
+ * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
|
||
+ * Adapted for omap850 by Zebediah C. McClure <zmc@lurian.net>
|
||
+ * Adapted for omap7xx by Alistair Buxton <a.j.buxton@gmail.com>
|
||
+ *
|
||
+ * This program is free software; you can redistribute it and/or modify it
|
||
+ * under the terms of the GNU General Public License as published by the
|
||
+ * Free Software Foundation; either version 2 of the License, or (at your
|
||
+ * option) any later version.
|
||
+ *
|
||
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
|
||
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
||
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
|
||
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
||
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
|
||
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
|
||
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
||
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||
+ *
|
||
+ * You should have received a copy of the GNU General Public License along
|
||
+ * with this program; if not, write to the Free Software Foundation, Inc.,
|
||
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
|
||
+ */
|
||
+
|
||
+#ifndef __ASM_ARCH_OMAP7XX_H
|
||
+#define __ASM_ARCH_OMAP7XX_H
|
||
+
|
||
+/*
|
||
+ * ----------------------------------------------------------------------------
|
||
+ * Base addresses
|
||
+ * ----------------------------------------------------------------------------
|
||
+ */
|
||
+
|
||
+/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
|
||
+
|
||
+#define OMAP7XX_DSP_BASE 0xE0000000
|
||
+#define OMAP7XX_DSP_SIZE 0x50000
|
||
+#define OMAP7XX_DSP_START 0xE0000000
|
||
+
|
||
+#define OMAP7XX_DSPREG_BASE 0xE1000000
|
||
+#define OMAP7XX_DSPREG_SIZE SZ_128K
|
||
+#define OMAP7XX_DSPREG_START 0xE1000000
|
||
+
|
||
+/*
|
||
+ * ----------------------------------------------------------------------------
|
||
+ * OMAP7XX specific configuration registers
|
||
+ * ----------------------------------------------------------------------------
|
||
+ */
|
||
+#define OMAP7XX_CONFIG_BASE 0xfffe1000
|
||
+#define OMAP7XX_IO_CONF_0 0xfffe1070
|
||
+#define OMAP7XX_IO_CONF_1 0xfffe1074
|
||
+#define OMAP7XX_IO_CONF_2 0xfffe1078
|
||
+#define OMAP7XX_IO_CONF_3 0xfffe107c
|
||
+#define OMAP7XX_IO_CONF_4 0xfffe1080
|
||
+#define OMAP7XX_IO_CONF_5 0xfffe1084
|
||
+#define OMAP7XX_IO_CONF_6 0xfffe1088
|
||
+#define OMAP7XX_IO_CONF_7 0xfffe108c
|
||
+#define OMAP7XX_IO_CONF_8 0xfffe1090
|
||
+#define OMAP7XX_IO_CONF_9 0xfffe1094
|
||
+#define OMAP7XX_IO_CONF_10 0xfffe1098
|
||
+#define OMAP7XX_IO_CONF_11 0xfffe109c
|
||
+#define OMAP7XX_IO_CONF_12 0xfffe10a0
|
||
+#define OMAP7XX_IO_CONF_13 0xfffe10a4
|
||
+
|
||
+#define OMAP7XX_MODE_1 0xfffe1010
|
||
+#define OMAP7XX_MODE_2 0xfffe1014
|
||
+
|
||
+/* CSMI specials: in terms of base + offset */
|
||
+#define OMAP7XX_MODE2_OFFSET 0x14
|
||
+
|
||
+/*
|
||
+ * ----------------------------------------------------------------------------
|
||
+ * OMAP7XX traffic controller configuration registers
|
||
+ * ----------------------------------------------------------------------------
|
||
+ */
|
||
+#define OMAP7XX_FLASH_CFG_0 0xfffecc10
|
||
+#define OMAP7XX_FLASH_ACFG_0 0xfffecc50
|
||
+#define OMAP7XX_FLASH_CFG_1 0xfffecc14
|
||
+#define OMAP7XX_FLASH_ACFG_1 0xfffecc54
|
||
+
|
||
+/*
|
||
+ * ----------------------------------------------------------------------------
|
||
+ * OMAP7XX DSP control registers
|
||
+ * ----------------------------------------------------------------------------
|
||
+ */
|
||
+#define OMAP7XX_ICR_BASE 0xfffbb800
|
||
+#define OMAP7XX_DSP_M_CTL 0xfffbb804
|
||
+#define OMAP7XX_DSP_MMU_BASE 0xfffed200
|
||
+
|
||
+/*
|
||
+ * ----------------------------------------------------------------------------
|
||
+ * OMAP7XX PCC_UPLD configuration registers
|
||
+ * ----------------------------------------------------------------------------
|
||
+ */
|
||
+#define OMAP7XX_PCC_UPLD_CTRL_BASE (0xfffe0900)
|
||
+#define OMAP7XX_PCC_UPLD_CTRL (OMAP7XX_PCC_UPLD_CTRL_BASE + 0x00)
|
||
+
|
||
+#endif /* __ASM_ARCH_OMAP7XX_H */
|
||
+
|
||
diff --git a/arch/arm/plat-omap/include/mach/sdrc.h b/arch/arm/plat-omap/include/mach/sdrc.h
|
||
index 1c09c78..7b58a5f 100644
|
||
--- a/arch/arm/plat-omap/include/mach/sdrc.h
|
||
+++ b/arch/arm/plat-omap/include/mach/sdrc.h
|
||
@@ -80,11 +80,11 @@
|
||
*/
|
||
|
||
#define OMAP242X_SMS_REGADDR(reg) \
|
||
- (void __iomem *)OMAP2_IO_ADDRESS(OMAP2420_SMS_BASE + reg)
|
||
+ (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE + reg)
|
||
#define OMAP243X_SMS_REGADDR(reg) \
|
||
- (void __iomem *)OMAP2_IO_ADDRESS(OMAP243X_SMS_BASE + reg)
|
||
+ (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE + reg)
|
||
#define OMAP343X_SMS_REGADDR(reg) \
|
||
- (void __iomem *)OMAP2_IO_ADDRESS(OMAP343X_SMS_BASE + reg)
|
||
+ (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE + reg)
|
||
|
||
/* SMS register offsets - read/write with sms_{read,write}_reg() */
|
||
|
||
diff --git a/arch/arm/plat-omap/include/mach/serial.h b/arch/arm/plat-omap/include/mach/serial.h
|
||
index e249186..9951345 100644
|
||
--- a/arch/arm/plat-omap/include/mach/serial.h
|
||
+++ b/arch/arm/plat-omap/include/mach/serial.h
|
||
@@ -20,26 +20,22 @@
|
||
#define OMAP_UART1_BASE 0xfffb0000
|
||
#define OMAP_UART2_BASE 0xfffb0800
|
||
#define OMAP_UART3_BASE 0xfffb9800
|
||
-#define OMAP_MAX_NR_PORTS 3
|
||
#elif defined(CONFIG_ARCH_OMAP2)
|
||
/* OMAP2 serial ports */
|
||
#define OMAP_UART1_BASE 0x4806a000
|
||
#define OMAP_UART2_BASE 0x4806c000
|
||
#define OMAP_UART3_BASE 0x4806e000
|
||
-#define OMAP_MAX_NR_PORTS 3
|
||
#elif defined(CONFIG_ARCH_OMAP3)
|
||
/* OMAP3 serial ports */
|
||
#define OMAP_UART1_BASE 0x4806a000
|
||
#define OMAP_UART2_BASE 0x4806c000
|
||
#define OMAP_UART3_BASE 0x49020000
|
||
-#define OMAP_MAX_NR_PORTS 3
|
||
#elif defined(CONFIG_ARCH_OMAP4)
|
||
/* OMAP4 serial ports */
|
||
#define OMAP_UART1_BASE 0x4806a000
|
||
#define OMAP_UART2_BASE 0x4806c000
|
||
#define OMAP_UART3_BASE 0x48020000
|
||
#define OMAP_UART4_BASE 0x4806e000
|
||
-#define OMAP_MAX_NR_PORTS 4
|
||
#endif
|
||
|
||
#define OMAP1510_BASE_BAUD (12000000/16)
|
||
diff --git a/arch/arm/plat-omap/include/mach/uncompress.h b/arch/arm/plat-omap/include/mach/uncompress.h
|
||
index 0814c5f..ddf7b88 100644
|
||
--- a/arch/arm/plat-omap/include/mach/uncompress.h
|
||
+++ b/arch/arm/plat-omap/include/mach/uncompress.h
|
||
@@ -25,6 +25,7 @@ unsigned int system_rev;
|
||
|
||
#define UART_OMAP_MDR1 0x08 /* mode definition register */
|
||
#define OMAP_ID_730 0x355F
|
||
+#define OMAP_ID_850 0x362C
|
||
#define ID_MASK 0x7fff
|
||
#define check_port(base, shift) ((base[UART_OMAP_MDR1 << shift] & 7) == 0)
|
||
#define omap_get_id() ((*(volatile unsigned int *)(0xfffed404)) >> 12) & ID_MASK
|
||
@@ -53,7 +54,7 @@ static void putc(int c)
|
||
/* MMU is not on, so cpu_is_omapXXXX() won't work here */
|
||
unsigned int omap_id = omap_get_id();
|
||
|
||
- if (omap_id == OMAP_ID_730)
|
||
+ if (omap_id == OMAP_ID_730 || omap_id == OMAP_ID_850)
|
||
shift = 0;
|
||
|
||
if (check_port(uart, shift))
|
||
diff --git a/arch/arm/plat-omap/include/mach/usb.h b/arch/arm/plat-omap/include/mach/usb.h
|
||
index f337e17..a4068a4 100644
|
||
--- a/arch/arm/plat-omap/include/mach/usb.h
|
||
+++ b/arch/arm/plat-omap/include/mach/usb.h
|
||
@@ -5,6 +5,21 @@
|
||
|
||
#include <mach/board.h>
|
||
|
||
+#define OMAP3_HS_USB_PORTS 3
|
||
+enum ehci_hcd_omap_mode {
|
||
+ EHCI_HCD_OMAP_MODE_UNKNOWN,
|
||
+ EHCI_HCD_OMAP_MODE_PHY,
|
||
+ EHCI_HCD_OMAP_MODE_TLL,
|
||
+};
|
||
+
|
||
+struct ehci_hcd_omap_platform_data {
|
||
+ enum ehci_hcd_omap_mode port_mode[OMAP3_HS_USB_PORTS];
|
||
+ unsigned phy_reset:1;
|
||
+
|
||
+ /* have to be valid if phy_reset is true and portx is in phy mode */
|
||
+ int reset_gpio_port[OMAP3_HS_USB_PORTS];
|
||
+};
|
||
+
|
||
/*-------------------------------------------------------------------------*/
|
||
|
||
#define OMAP1_OTG_BASE 0xfffb0400
|
||
@@ -29,6 +44,8 @@
|
||
|
||
extern void usb_musb_init(void);
|
||
|
||
+extern void usb_ehci_init(struct ehci_hcd_omap_platform_data *pdata);
|
||
+
|
||
#endif
|
||
|
||
void omap_usb_init(struct omap_usb_config *pdata);
|
||
diff --git a/arch/arm/plat-omap/include/mach/vmalloc.h b/arch/arm/plat-omap/include/mach/vmalloc.h
|
||
index b97dfaf..9eebf62 100644
|
||
--- a/arch/arm/plat-omap/include/mach/vmalloc.h
|
||
+++ b/arch/arm/plat-omap/include/mach/vmalloc.h
|
||
@@ -17,5 +17,5 @@
|
||
* along with this program; if not, write to the Free Software
|
||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||
*/
|
||
-#define VMALLOC_END (PAGE_OFFSET + 0x18000000)
|
||
+#define VMALLOC_END (PAGE_OFFSET + 0x38000000)
|
||
|
||
diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c
|
||
index b6defa2..93c1d53 100644
|
||
--- a/arch/arm/plat-omap/io.c
|
||
+++ b/arch/arm/plat-omap/io.c
|
||
@@ -13,7 +13,7 @@
|
||
#include <linux/io.h>
|
||
#include <linux/mm.h>
|
||
|
||
-#include <mach/omap730.h>
|
||
+#include <mach/omap7xx.h>
|
||
#include <mach/omap1510.h>
|
||
#include <mach/omap16xx.h>
|
||
#include <mach/omap24xx.h>
|
||
@@ -33,13 +33,13 @@ void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type)
|
||
if (BETWEEN(p, OMAP1_IO_PHYS, OMAP1_IO_SIZE))
|
||
return XLATE(p, OMAP1_IO_PHYS, OMAP1_IO_VIRT);
|
||
}
|
||
- if (cpu_is_omap730()) {
|
||
- if (BETWEEN(p, OMAP730_DSP_BASE, OMAP730_DSP_SIZE))
|
||
- return XLATE(p, OMAP730_DSP_BASE, OMAP730_DSP_START);
|
||
+ if (cpu_is_omap7xx()) {
|
||
+ if (BETWEEN(p, OMAP7XX_DSP_BASE, OMAP7XX_DSP_SIZE))
|
||
+ return XLATE(p, OMAP7XX_DSP_BASE, OMAP7XX_DSP_START);
|
||
|
||
- if (BETWEEN(p, OMAP730_DSPREG_BASE, OMAP730_DSPREG_SIZE))
|
||
- return XLATE(p, OMAP730_DSPREG_BASE,
|
||
- OMAP730_DSPREG_START);
|
||
+ if (BETWEEN(p, OMAP7XX_DSPREG_BASE, OMAP7XX_DSPREG_SIZE))
|
||
+ return XLATE(p, OMAP7XX_DSPREG_BASE,
|
||
+ OMAP7XX_DSPREG_START);
|
||
}
|
||
if (cpu_is_omap15xx()) {
|
||
if (BETWEEN(p, OMAP1510_DSP_BASE, OMAP1510_DSP_SIZE))
|
||
@@ -114,6 +114,14 @@ void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type)
|
||
return XLATE(p, L4_WK_44XX_PHYS, L4_WK_44XX_VIRT);
|
||
if (BETWEEN(p, OMAP44XX_GPMC_PHYS, OMAP44XX_GPMC_SIZE))
|
||
return XLATE(p, OMAP44XX_GPMC_PHYS, OMAP44XX_GPMC_VIRT);
|
||
+ if (BETWEEN(p, OMAP44XX_EMIF1_PHYS, OMAP44XX_EMIF1_SIZE))
|
||
+ return XLATE(p, OMAP44XX_EMIF1_PHYS, \
|
||
+ OMAP44XX_EMIF1_VIRT);
|
||
+ if (BETWEEN(p, OMAP44XX_EMIF2_PHYS, OMAP44XX_EMIF2_SIZE))
|
||
+ return XLATE(p, OMAP44XX_EMIF2_PHYS, \
|
||
+ OMAP44XX_EMIF2_VIRT);
|
||
+ if (BETWEEN(p, OMAP44XX_DMM_PHYS, OMAP44XX_DMM_SIZE))
|
||
+ return XLATE(p, OMAP44XX_DMM_PHYS, OMAP44XX_DMM_VIRT);
|
||
if (BETWEEN(p, L4_PER_44XX_PHYS, L4_PER_44XX_SIZE))
|
||
return XLATE(p, L4_PER_44XX_PHYS, L4_PER_44XX_VIRT);
|
||
if (BETWEEN(p, L4_EMU_44XX_PHYS, L4_EMU_44XX_SIZE))
|
||
@@ -142,7 +150,7 @@ u8 omap_readb(u32 pa)
|
||
if (cpu_class_is_omap1())
|
||
return __raw_readb(OMAP1_IO_ADDRESS(pa));
|
||
else
|
||
- return __raw_readb(OMAP2_IO_ADDRESS(pa));
|
||
+ return __raw_readb(OMAP2_L4_IO_ADDRESS(pa));
|
||
}
|
||
EXPORT_SYMBOL(omap_readb);
|
||
|
||
@@ -151,7 +159,7 @@ u16 omap_readw(u32 pa)
|
||
if (cpu_class_is_omap1())
|
||
return __raw_readw(OMAP1_IO_ADDRESS(pa));
|
||
else
|
||
- return __raw_readw(OMAP2_IO_ADDRESS(pa));
|
||
+ return __raw_readw(OMAP2_L4_IO_ADDRESS(pa));
|
||
}
|
||
EXPORT_SYMBOL(omap_readw);
|
||
|
||
@@ -160,7 +168,7 @@ u32 omap_readl(u32 pa)
|
||
if (cpu_class_is_omap1())
|
||
return __raw_readl(OMAP1_IO_ADDRESS(pa));
|
||
else
|
||
- return __raw_readl(OMAP2_IO_ADDRESS(pa));
|
||
+ return __raw_readl(OMAP2_L4_IO_ADDRESS(pa));
|
||
}
|
||
EXPORT_SYMBOL(omap_readl);
|
||
|
||
@@ -169,7 +177,7 @@ void omap_writeb(u8 v, u32 pa)
|
||
if (cpu_class_is_omap1())
|
||
__raw_writeb(v, OMAP1_IO_ADDRESS(pa));
|
||
else
|
||
- __raw_writeb(v, OMAP2_IO_ADDRESS(pa));
|
||
+ __raw_writeb(v, OMAP2_L4_IO_ADDRESS(pa));
|
||
}
|
||
EXPORT_SYMBOL(omap_writeb);
|
||
|
||
@@ -178,7 +186,7 @@ void omap_writew(u16 v, u32 pa)
|
||
if (cpu_class_is_omap1())
|
||
__raw_writew(v, OMAP1_IO_ADDRESS(pa));
|
||
else
|
||
- __raw_writew(v, OMAP2_IO_ADDRESS(pa));
|
||
+ __raw_writew(v, OMAP2_L4_IO_ADDRESS(pa));
|
||
}
|
||
EXPORT_SYMBOL(omap_writew);
|
||
|
||
@@ -187,6 +195,6 @@ void omap_writel(u32 v, u32 pa)
|
||
if (cpu_class_is_omap1())
|
||
__raw_writel(v, OMAP1_IO_ADDRESS(pa));
|
||
else
|
||
- __raw_writel(v, OMAP2_IO_ADDRESS(pa));
|
||
+ __raw_writel(v, OMAP2_L4_IO_ADDRESS(pa));
|
||
}
|
||
EXPORT_SYMBOL(omap_writel);
|
||
diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
|
||
index 2c409fc..12513f4 100644
|
||
--- a/arch/arm/plat-omap/omap_device.c
|
||
+++ b/arch/arm/plat-omap/omap_device.c
|
||
@@ -103,21 +103,6 @@
|
||
/* Private functions */
|
||
|
||
/**
|
||
- * _read_32ksynct - read the OMAP 32K sync timer
|
||
- *
|
||
- * Returns the current value of the 32KiHz synchronization counter.
|
||
- * XXX this should be generalized to simply read the system clocksource.
|
||
- * XXX this should be moved to a separate synctimer32k.c file
|
||
- */
|
||
-static u32 _read_32ksynct(void)
|
||
-{
|
||
- if (!cpu_class_is_omap2())
|
||
- BUG();
|
||
-
|
||
- return __raw_readl(OMAP2_IO_ADDRESS(OMAP_32KSYNCT_BASE + 0x010));
|
||
-}
|
||
-
|
||
-/**
|
||
* _omap_device_activate - increase device readiness
|
||
* @od: struct omap_device *
|
||
* @ignore_lat: increase to latency target (0) or full readiness (1)?
|
||
@@ -133,13 +118,13 @@ static u32 _read_32ksynct(void)
|
||
*/
|
||
static int _omap_device_activate(struct omap_device *od, u8 ignore_lat)
|
||
{
|
||
- u32 a, b;
|
||
+ struct timespec a, b, c;
|
||
|
||
pr_debug("omap_device: %s: activating\n", od->pdev.name);
|
||
|
||
while (od->pm_lat_level > 0) {
|
||
struct omap_device_pm_latency *odpl;
|
||
- int act_lat = 0;
|
||
+ unsigned long long act_lat = 0;
|
||
|
||
od->pm_lat_level--;
|
||
|
||
@@ -149,20 +134,22 @@ static int _omap_device_activate(struct omap_device *od, u8 ignore_lat)
|
||
(od->dev_wakeup_lat <= od->_dev_wakeup_lat_limit))
|
||
break;
|
||
|
||
- a = _read_32ksynct();
|
||
+ getnstimeofday(&a);
|
||
|
||
/* XXX check return code */
|
||
odpl->activate_func(od);
|
||
|
||
- b = _read_32ksynct();
|
||
+ getnstimeofday(&b);
|
||
|
||
- act_lat = (b - a) >> 15; /* 32KiHz cycles to microseconds */
|
||
+ c = timespec_sub(b, a);
|
||
+ act_lat = timespec_to_ns(&c) * NSEC_PER_USEC;
|
||
|
||
pr_debug("omap_device: %s: pm_lat %d: activate: elapsed time "
|
||
- "%d usec\n", od->pdev.name, od->pm_lat_level, act_lat);
|
||
+ "%llu usec\n", od->pdev.name, od->pm_lat_level,
|
||
+ act_lat);
|
||
|
||
WARN(act_lat > odpl->activate_lat, "omap_device: %s.%d: "
|
||
- "activate step %d took longer than expected (%d > %d)\n",
|
||
+ "activate step %d took longer than expected (%llu > %d)\n",
|
||
od->pdev.name, od->pdev.id, od->pm_lat_level,
|
||
act_lat, odpl->activate_lat);
|
||
|
||
@@ -188,13 +175,13 @@ static int _omap_device_activate(struct omap_device *od, u8 ignore_lat)
|
||
*/
|
||
static int _omap_device_deactivate(struct omap_device *od, u8 ignore_lat)
|
||
{
|
||
- u32 a, b;
|
||
+ struct timespec a, b, c;
|
||
|
||
pr_debug("omap_device: %s: deactivating\n", od->pdev.name);
|
||
|
||
while (od->pm_lat_level < od->pm_lats_cnt) {
|
||
struct omap_device_pm_latency *odpl;
|
||
- int deact_lat = 0;
|
||
+ unsigned long long deact_lat = 0;
|
||
|
||
odpl = od->pm_lats + od->pm_lat_level;
|
||
|
||
@@ -203,23 +190,24 @@ static int _omap_device_deactivate(struct omap_device *od, u8 ignore_lat)
|
||
od->_dev_wakeup_lat_limit))
|
||
break;
|
||
|
||
- a = _read_32ksynct();
|
||
+ getnstimeofday(&a);
|
||
|
||
/* XXX check return code */
|
||
odpl->deactivate_func(od);
|
||
|
||
- b = _read_32ksynct();
|
||
+ getnstimeofday(&b);
|
||
|
||
- deact_lat = (b - a) >> 15; /* 32KiHz cycles to microseconds */
|
||
+ c = timespec_sub(b, a);
|
||
+ deact_lat = timespec_to_ns(&c) * NSEC_PER_USEC;
|
||
|
||
pr_debug("omap_device: %s: pm_lat %d: deactivate: elapsed time "
|
||
- "%d usec\n", od->pdev.name, od->pm_lat_level,
|
||
+ "%llu usec\n", od->pdev.name, od->pm_lat_level,
|
||
deact_lat);
|
||
|
||
WARN(deact_lat > odpl->deactivate_lat, "omap_device: %s.%d: "
|
||
- "deactivate step %d took longer than expected (%d > %d)\n",
|
||
- od->pdev.name, od->pdev.id, od->pm_lat_level,
|
||
- deact_lat, odpl->deactivate_lat);
|
||
+ "deactivate step %d took longer than expected "
|
||
+ "(%llu > %d)\n", od->pdev.name, od->pdev.id,
|
||
+ od->pm_lat_level, deact_lat, odpl->deactivate_lat);
|
||
|
||
od->dev_wakeup_lat += odpl->activate_lat;
|
||
|
||
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
|
||
index 75d1f26..4144f81 100644
|
||
--- a/arch/arm/plat-omap/sram.c
|
||
+++ b/arch/arm/plat-omap/sram.c
|
||
@@ -41,14 +41,14 @@
|
||
#define OMAP1_SRAM_VA VMALLOC_END
|
||
#define OMAP2_SRAM_PA 0x40200000
|
||
#define OMAP2_SRAM_PUB_PA 0x4020f800
|
||
-#define OMAP2_SRAM_VA 0xe3000000
|
||
+#define OMAP2_SRAM_VA 0xfe400000
|
||
#define OMAP2_SRAM_PUB_VA (OMAP2_SRAM_VA + 0x800)
|
||
#define OMAP3_SRAM_PA 0x40200000
|
||
-#define OMAP3_SRAM_VA 0xe3000000
|
||
+#define OMAP3_SRAM_VA 0xfe400000
|
||
#define OMAP3_SRAM_PUB_PA 0x40208000
|
||
#define OMAP3_SRAM_PUB_VA (OMAP3_SRAM_VA + 0x8000)
|
||
#define OMAP4_SRAM_PA 0x40200000 /*0x402f0000*/
|
||
-#define OMAP4_SRAM_VA 0xd7000000 /*0xd70f0000*/
|
||
+#define OMAP4_SRAM_VA 0xfe400000 /*0xfe4f0000*/
|
||
|
||
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
|
||
#define SRAM_BOOTLOADER_SZ 0x00
|
||
@@ -56,16 +56,16 @@
|
||
#define SRAM_BOOTLOADER_SZ 0x80
|
||
#endif
|
||
|
||
-#define OMAP24XX_VA_REQINFOPERM0 OMAP2_IO_ADDRESS(0x68005048)
|
||
-#define OMAP24XX_VA_READPERM0 OMAP2_IO_ADDRESS(0x68005050)
|
||
-#define OMAP24XX_VA_WRITEPERM0 OMAP2_IO_ADDRESS(0x68005058)
|
||
+#define OMAP24XX_VA_REQINFOPERM0 OMAP2_L3_IO_ADDRESS(0x68005048)
|
||
+#define OMAP24XX_VA_READPERM0 OMAP2_L3_IO_ADDRESS(0x68005050)
|
||
+#define OMAP24XX_VA_WRITEPERM0 OMAP2_L3_IO_ADDRESS(0x68005058)
|
||
|
||
-#define OMAP34XX_VA_REQINFOPERM0 OMAP2_IO_ADDRESS(0x68012848)
|
||
-#define OMAP34XX_VA_READPERM0 OMAP2_IO_ADDRESS(0x68012850)
|
||
-#define OMAP34XX_VA_WRITEPERM0 OMAP2_IO_ADDRESS(0x68012858)
|
||
-#define OMAP34XX_VA_ADDR_MATCH2 OMAP2_IO_ADDRESS(0x68012880)
|
||
-#define OMAP34XX_VA_SMS_RG_ATT0 OMAP2_IO_ADDRESS(0x6C000048)
|
||
-#define OMAP34XX_VA_CONTROL_STAT OMAP2_IO_ADDRESS(0x480022F0)
|
||
+#define OMAP34XX_VA_REQINFOPERM0 OMAP2_L3_IO_ADDRESS(0x68012848)
|
||
+#define OMAP34XX_VA_READPERM0 OMAP2_L3_IO_ADDRESS(0x68012850)
|
||
+#define OMAP34XX_VA_WRITEPERM0 OMAP2_L3_IO_ADDRESS(0x68012858)
|
||
+#define OMAP34XX_VA_ADDR_MATCH2 OMAP2_L3_IO_ADDRESS(0x68012880)
|
||
+#define OMAP34XX_VA_SMS_RG_ATT0 OMAP2_L3_IO_ADDRESS(0x6C000048)
|
||
+#define OMAP34XX_VA_CONTROL_STAT OMAP2_L4_IO_ADDRESS(0x480022F0)
|
||
|
||
#define GP_DEVICE 0x300
|
||
|
||
diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c
|
||
index 509f2ed..3c40b85 100644
|
||
--- a/arch/arm/plat-omap/usb.c
|
||
+++ b/arch/arm/plat-omap/usb.c
|
||
@@ -614,8 +614,8 @@ omap_otg_init(struct omap_usb_config *config)
|
||
if (config->otg || config->register_host) {
|
||
syscon &= ~HST_IDLE_EN;
|
||
ohci_device.dev.platform_data = config;
|
||
- if (cpu_is_omap730())
|
||
- ohci_resources[1].start = INT_730_USB_HHC_1;
|
||
+ if (cpu_is_omap7xx())
|
||
+ ohci_resources[1].start = INT_7XX_USB_HHC_1;
|
||
status = platform_device_register(&ohci_device);
|
||
if (status)
|
||
pr_debug("can't register OHCI device, %d\n", status);
|
||
@@ -626,8 +626,8 @@ omap_otg_init(struct omap_usb_config *config)
|
||
if (config->otg) {
|
||
syscon &= ~OTG_IDLE_EN;
|
||
otg_device.dev.platform_data = config;
|
||
- if (cpu_is_omap730())
|
||
- otg_resources[1].start = INT_730_USB_OTG;
|
||
+ if (cpu_is_omap7xx())
|
||
+ otg_resources[1].start = INT_7XX_USB_OTG;
|
||
status = platform_device_register(&otg_device);
|
||
if (status)
|
||
pr_debug("can't register OTG device, %d\n", status);
|
||
@@ -731,7 +731,7 @@ static inline void omap_1510_usb_init(struct omap_usb_config *config) {}
|
||
|
||
void __init omap_usb_init(struct omap_usb_config *pdata)
|
||
{
|
||
- if (cpu_is_omap730() || cpu_is_omap16xx() || cpu_is_omap24xx())
|
||
+ if (cpu_is_omap7xx() || cpu_is_omap16xx() || cpu_is_omap24xx())
|
||
omap_otg_init(pdata);
|
||
else if (cpu_is_omap15xx())
|
||
omap_1510_usb_init(pdata);
|
||
diff --git a/drivers/Makefile b/drivers/Makefile
|
||
index 6ee53c7..086857c 100644
|
||
--- a/drivers/Makefile
|
||
+++ b/drivers/Makefile
|
||
@@ -72,7 +72,7 @@ obj-$(CONFIG_GAMEPORT) += input/gameport/
|
||
obj-$(CONFIG_INPUT) += input/
|
||
obj-$(CONFIG_I2O) += message/
|
||
obj-$(CONFIG_RTC_LIB) += rtc/
|
||
-obj-y += i2c/ media/
|
||
+obj-y += i2c/ media/ cbus/
|
||
obj-$(CONFIG_PPS) += pps/
|
||
obj-$(CONFIG_W1) += w1/
|
||
obj-$(CONFIG_POWER_SUPPLY) += power/
|
||
diff --git a/drivers/cbus/Kconfig b/drivers/cbus/Kconfig
|
||
new file mode 100644
|
||
index 0000000..25f8039
|
||
--- /dev/null
|
||
+++ b/drivers/cbus/Kconfig
|
||
@@ -0,0 +1,89 @@
|
||
+#
|
||
+# CBUS device configuration
|
||
+#
|
||
+
|
||
+menu "CBUS support"
|
||
+
|
||
+config CBUS
|
||
+ depends on ARCH_OMAP
|
||
+ bool "CBUS support on OMAP"
|
||
+ ---help---
|
||
+ CBUS is a proprietary serial protocol by Nokia. It is mainly
|
||
+ used for accessing Energy Management auxiliary chips.
|
||
+
|
||
+ If you want CBUS support, you should say Y here.
|
||
+
|
||
+config CBUS_TAHVO
|
||
+ depends on CBUS
|
||
+ bool "Support for Tahvo"
|
||
+ ---help---
|
||
+ Tahvo is a mixed signal ASIC with some system features
|
||
+
|
||
+ If you want Tahvo support, you should say Y here.
|
||
+
|
||
+config CBUS_TAHVO_USER
|
||
+ depends on CBUS_TAHVO
|
||
+ bool "Support for Tahvo user space functions"
|
||
+ ---help---
|
||
+ If you want support for Tahvo's user space read/write etc. functions,
|
||
+ you should say Y here.
|
||
+
|
||
+config CBUS_TAHVO_USB
|
||
+ depends on CBUS_TAHVO && USB
|
||
+ tristate "Support for Tahvo USB transceiver"
|
||
+ ---help---
|
||
+ If you want Tahvo support for USB transceiver, say Y or M here.
|
||
+
|
||
+config CBUS_TAHVO_USB_HOST_BY_DEFAULT
|
||
+ depends on CBUS_TAHVO_USB && USB_OTG
|
||
+ boolean "Device in USB host mode by default"
|
||
+ ---help---
|
||
+ Say Y here, if you want the device to enter USB host mode
|
||
+ by default on bootup.
|
||
+
|
||
+config CBUS_RETU
|
||
+ depends on CBUS
|
||
+ bool "Support for Retu"
|
||
+ ---help---
|
||
+ Retu is a mixed signal ASIC with some system features
|
||
+
|
||
+ If you want Retu support, you should say Y here.
|
||
+
|
||
+config CBUS_RETU_USER
|
||
+ depends on CBUS_RETU
|
||
+ bool "Support for Retu user space functions"
|
||
+ ---help---
|
||
+ If you want support for Retu's user space read/write etc. functions,
|
||
+ you should say Y here.
|
||
+
|
||
+config CBUS_RETU_POWERBUTTON
|
||
+ depends on CBUS_RETU
|
||
+ bool "Support for Retu power button"
|
||
+ ---help---
|
||
+ The power button on Nokia 770 is connected to the Retu ASIC.
|
||
+
|
||
+ If you want support for the Retu power button, you should say Y here.
|
||
+
|
||
+config CBUS_RETU_RTC
|
||
+ depends on CBUS_RETU && SYSFS
|
||
+ tristate "Support for Retu pseudo-RTC"
|
||
+ ---help---
|
||
+ Say Y here if you want support for the device that alleges to be an
|
||
+ RTC in Retu. This will expose a sysfs interface for it.
|
||
+
|
||
+config CBUS_RETU_WDT
|
||
+ depends on CBUS_RETU && SYSFS
|
||
+ tristate "Support for Retu watchdog timer"
|
||
+ ---help---
|
||
+ Say Y here if you want support for the watchdog in Retu. This will
|
||
+ expose a sysfs interface to grok it.
|
||
+
|
||
+config CBUS_RETU_HEADSET
|
||
+ depends on CBUS_RETU && SYSFS
|
||
+ tristate "Support for headset detection with Retu/Vilma"
|
||
+ ---help---
|
||
+ Say Y here if you want support detecting a headset that's connected
|
||
+ to Retu/Vilma. Detection state and events are exposed through
|
||
+ sysfs.
|
||
+
|
||
+endmenu
|
||
diff --git a/drivers/cbus/Makefile b/drivers/cbus/Makefile
|
||
new file mode 100644
|
||
index 0000000..347c2a4
|
||
--- /dev/null
|
||
+++ b/drivers/cbus/Makefile
|
||
@@ -0,0 +1,14 @@
|
||
+#
|
||
+# Makefile for CBUS.
|
||
+#
|
||
+
|
||
+obj-$(CONFIG_CBUS) += cbus.o
|
||
+obj-$(CONFIG_CBUS_TAHVO) += tahvo.o
|
||
+obj-$(CONFIG_CBUS_RETU) += retu.o
|
||
+obj-$(CONFIG_CBUS_TAHVO_USB) += tahvo-usb.o
|
||
+obj-$(CONFIG_CBUS_RETU_POWERBUTTON) += retu-pwrbutton.o
|
||
+obj-$(CONFIG_CBUS_RETU_RTC) += retu-rtc.o
|
||
+obj-$(CONFIG_CBUS_RETU_WDT) += retu-wdt.o
|
||
+obj-$(CONFIG_CBUS_TAHVO_USER) += tahvo-user.o
|
||
+obj-$(CONFIG_CBUS_RETU_USER) += retu-user.o
|
||
+obj-$(CONFIG_CBUS_RETU_HEADSET) += retu-headset.o
|
||
diff --git a/drivers/cbus/cbus.c b/drivers/cbus/cbus.c
|
||
new file mode 100644
|
||
index 0000000..774acce
|
||
--- /dev/null
|
||
+++ b/drivers/cbus/cbus.c
|
||
@@ -0,0 +1,293 @@
|
||
+/*
|
||
+ * drivers/cbus/cbus.c
|
||
+ *
|
||
+ * Support functions for CBUS serial protocol
|
||
+ *
|
||
+ * Copyright (C) 2004, 2005 Nokia Corporation
|
||
+ *
|
||
+ * Written by Juha Yrj<72>l<EFBFBD> <juha.yrjola@nokia.com>,
|
||
+ * David Weinehall <david.weinehall@nokia.com>, and
|
||
+ * Mikko Ylinen <mikko.k.ylinen@nokia.com>
|
||
+ *
|
||
+ * This file is subject to the terms and conditions of the GNU General
|
||
+ * Public License. See the file "COPYING" in the main directory of this
|
||
+ * archive for more details.
|
||
+ *
|
||
+ * This program is distributed in the hope that it will be useful,
|
||
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
+ * GNU General Public License for more details.
|
||
+ *
|
||
+ * You should have received a copy of the GNU General Public License
|
||
+ * along with this program; if not, write to the Free Software
|
||
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||
+ */
|
||
+
|
||
+#include <linux/device.h>
|
||
+#include <linux/init.h>
|
||
+#include <linux/kernel.h>
|
||
+#include <linux/delay.h>
|
||
+#include <linux/spinlock.h>
|
||
+#include <linux/gpio.h>
|
||
+
|
||
+#include <mach/board.h>
|
||
+#include <mach/board-nokia.h>
|
||
+
|
||
+#include <asm/io.h>
|
||
+
|
||
+#include "cbus.h"
|
||
+
|
||
+struct cbus_host *cbus_host = NULL;
|
||
+
|
||
+#ifdef CONFIG_ARCH_OMAP1
|
||
+/* We use our own MPUIO functions to get closer to 1MHz bus speed */
|
||
+
|
||
+static inline void cbus_set_gpio_direction(u32 base, int mpuio, int is_input)
|
||
+{
|
||
+ u16 w;
|
||
+
|
||
+ mpuio &= 0x0f;
|
||
+ w = __raw_readw(base + OMAP_MPUIO_IO_CNTL);
|
||
+ if (is_input)
|
||
+ w |= 1 << mpuio;
|
||
+ else
|
||
+ w &= ~(1 << mpuio);
|
||
+ __raw_writew(w, base + OMAP_MPUIO_IO_CNTL);
|
||
+
|
||
+}
|
||
+
|
||
+static inline void cbus_set_gpio_dataout(u32 base, int mpuio, int enable)
|
||
+{
|
||
+ u16 w;
|
||
+
|
||
+ mpuio &= 0x0f;
|
||
+ w = __raw_readw(base + OMAP_MPUIO_OUTPUT);
|
||
+ if (enable)
|
||
+ w |= 1 << mpuio;
|
||
+ else
|
||
+ w &= ~(1 << mpuio);
|
||
+ __raw_writew(w, base + OMAP_MPUIO_OUTPUT);
|
||
+}
|
||
+
|
||
+static inline int cbus_get_gpio_datain(u32 base, int mpuio)
|
||
+{
|
||
+ mpuio &= 0x0f;
|
||
+
|
||
+ return (__raw_readw(base + OMAP_MPUIO_INPUT_LATCH) & (1 << mpuio)) != 0;
|
||
+}
|
||
+
|
||
+static void cbus_send_bit(struct cbus_host *host, u32 base, int bit,
|
||
+ int set_to_input)
|
||
+{
|
||
+ cbus_set_gpio_dataout(base, host->dat_gpio, bit ? 1 : 0);
|
||
+ cbus_set_gpio_dataout(base, host->clk_gpio, 1);
|
||
+
|
||
+ /* The data bit is read on the rising edge of CLK */
|
||
+ if (set_to_input)
|
||
+ cbus_set_gpio_direction(base, host->dat_gpio, 1);
|
||
+
|
||
+ cbus_set_gpio_dataout(base, host->clk_gpio, 0);
|
||
+}
|
||
+
|
||
+static u8 cbus_receive_bit(struct cbus_host *host, u32 base)
|
||
+{
|
||
+ u8 ret;
|
||
+
|
||
+ cbus_set_gpio_dataout(base, host->clk_gpio, 1);
|
||
+ ret = cbus_get_gpio_datain(base, host->dat_gpio);
|
||
+ cbus_set_gpio_dataout(base, host->clk_gpio, 0);
|
||
+
|
||
+ return ret;
|
||
+}
|
||
+
|
||
+#define cbus_output(base, gpio, val) cbus_set_gpio_direction(base, gpio, 0)
|
||
+
|
||
+#else
|
||
+
|
||
+#define cbus_output(base, gpio, val) gpio_direction_output(gpio, val)
|
||
+#define cbus_set_gpio_dataout(base, gpio, enable) gpio_set_value(gpio, enable)
|
||
+#define cbus_get_gpio_datain(base, int, gpio) gpio_get_value(gpio)
|
||
+
|
||
+static void _cbus_send_bit(struct cbus_host *host, int bit, int set_to_input)
|
||
+{
|
||
+ gpio_set_value(host->dat_gpio, bit ? 1 : 0);
|
||
+ gpio_set_value(host->clk_gpio, 1);
|
||
+
|
||
+ /* The data bit is read on the rising edge of CLK */
|
||
+ if (set_to_input)
|
||
+ gpio_direction_input(host->dat_gpio);
|
||
+
|
||
+ gpio_set_value(host->clk_gpio, 0);
|
||
+}
|
||
+
|
||
+static u8 _cbus_receive_bit(struct cbus_host *host)
|
||
+{
|
||
+ u8 ret;
|
||
+
|
||
+ gpio_set_value(host->clk_gpio, 1);
|
||
+ ret = gpio_get_value(host->dat_gpio);
|
||
+ gpio_set_value(host->clk_gpio, 0);
|
||
+
|
||
+ return ret;
|
||
+}
|
||
+
|
||
+#define cbus_send_bit(host, base, bit, set_to_input) _cbus_send_bit(host, bit, set_to_input)
|
||
+#define cbus_receive_bit(host, base) _cbus_receive_bit(host)
|
||
+
|
||
+#endif
|
||
+
|
||
+static int cbus_transfer(struct cbus_host *host, int dev, int reg, int data)
|
||
+{
|
||
+ int i;
|
||
+ int is_read = 0;
|
||
+ unsigned long flags;
|
||
+ u32 base;
|
||
+
|
||
+#ifdef CONFIG_ARCH_OMAP1
|
||
+ base = OMAP1_IO_ADDRESS(OMAP_MPUIO_BASE);
|
||
+#else
|
||
+ base = 0;
|
||
+#endif
|
||
+
|
||
+ if (data < 0)
|
||
+ is_read = 1;
|
||
+
|
||
+ /* We don't want interrupts disturbing our transfer */
|
||
+ spin_lock_irqsave(&host->lock, flags);
|
||
+
|
||
+ /* Reset state and start of transfer, SEL stays down during transfer */
|
||
+ cbus_set_gpio_dataout(base, host->sel_gpio, 0);
|
||
+
|
||
+ /* Set the DAT pin to output */
|
||
+ cbus_output(base, host->dat_gpio, 1);
|
||
+
|
||
+ /* Send the device address */
|
||
+ for (i = 3; i > 0; i--)
|
||
+ cbus_send_bit(host, base, dev & (1 << (i - 1)), 0);
|
||
+
|
||
+ /* Send the rw flag */
|
||
+ cbus_send_bit(host, base, is_read, 0);
|
||
+
|
||
+ /* Send the register address */
|
||
+ for (i = 5; i > 0; i--) {
|
||
+ int set_to_input = 0;
|
||
+
|
||
+ if (is_read && i == 1)
|
||
+ set_to_input = 1;
|
||
+
|
||
+ cbus_send_bit(host, base, reg & (1 << (i - 1)), set_to_input);
|
||
+ }
|
||
+
|
||
+ if (!is_read) {
|
||
+ for (i = 16; i > 0; i--)
|
||
+ cbus_send_bit(host, base, data & (1 << (i - 1)), 0);
|
||
+ } else {
|
||
+ cbus_set_gpio_dataout(base, host->clk_gpio, 1);
|
||
+ data = 0;
|
||
+
|
||
+ for (i = 16; i > 0; i--) {
|
||
+ u8 bit = cbus_receive_bit(host, base);
|
||
+
|
||
+ if (bit)
|
||
+ data |= 1 << (i - 1);
|
||
+ }
|
||
+ }
|
||
+
|
||
+ /* Indicate end of transfer, SEL goes up until next transfer */
|
||
+ cbus_set_gpio_dataout(base, host->sel_gpio, 1);
|
||
+ cbus_set_gpio_dataout(base, host->clk_gpio, 1);
|
||
+ cbus_set_gpio_dataout(base, host->clk_gpio, 0);
|
||
+
|
||
+ spin_unlock_irqrestore(&host->lock, flags);
|
||
+
|
||
+ return is_read ? data : 0;
|
||
+}
|
||
+
|
||
+/*
|
||
+ * Read a given register from the device
|
||
+ */
|
||
+int cbus_read_reg(struct cbus_host *host, int dev, int reg)
|
||
+{
|
||
+ return cbus_host ? cbus_transfer(host, dev, reg, -1) : -ENODEV;
|
||
+}
|
||
+
|
||
+/*
|
||
+ * Write to a given register of the device
|
||
+ */
|
||
+int cbus_write_reg(struct cbus_host *host, int dev, int reg, u16 val)
|
||
+{
|
||
+ return cbus_host ? cbus_transfer(host, dev, reg, (int)val) : -ENODEV;
|
||
+}
|
||
+
|
||
+int __init cbus_bus_init(void)
|
||
+{
|
||
+ const struct omap_cbus_config * cbus_config;
|
||
+ struct cbus_host *chost;
|
||
+ int ret;
|
||
+
|
||
+ chost = kmalloc(sizeof (*chost), GFP_KERNEL);
|
||
+ if (chost == NULL)
|
||
+ return -ENOMEM;
|
||
+
|
||
+ memset(chost, 0, sizeof (*chost));
|
||
+
|
||
+ spin_lock_init(&chost->lock);
|
||
+
|
||
+ cbus_config = omap_get_config(OMAP_TAG_CBUS, struct omap_cbus_config);
|
||
+
|
||
+ if (cbus_config == NULL) {
|
||
+ printk(KERN_ERR "cbus: Unable to retrieve config data\n");
|
||
+ return -ENODATA;
|
||
+ }
|
||
+
|
||
+ chost->clk_gpio = cbus_config->clk_gpio;
|
||
+ chost->dat_gpio = cbus_config->dat_gpio;
|
||
+ chost->sel_gpio = cbus_config->sel_gpio;
|
||
+
|
||
+#ifdef CONFIG_ARCH_OMAP1
|
||
+ if (!OMAP_GPIO_IS_MPUIO(chost->clk_gpio) ||
|
||
+ !OMAP_GPIO_IS_MPUIO(chost->dat_gpio) ||
|
||
+ !OMAP_GPIO_IS_MPUIO(chost->sel_gpio)) {
|
||
+ printk(KERN_ERR "cbus: Only MPUIO pins supported\n");
|
||
+ ret = -ENODEV;
|
||
+ goto exit1;
|
||
+ }
|
||
+#endif
|
||
+
|
||
+ if ((ret = gpio_request(chost->clk_gpio, "CBUS clk")) < 0)
|
||
+ goto exit1;
|
||
+
|
||
+ if ((ret = gpio_request(chost->dat_gpio, "CBUS data")) < 0)
|
||
+ goto exit2;
|
||
+
|
||
+ if ((ret = gpio_request(chost->sel_gpio, "CBUS sel")) < 0)
|
||
+ goto exit3;
|
||
+
|
||
+ gpio_direction_output(chost->clk_gpio, 0);
|
||
+ gpio_direction_input(chost->dat_gpio);
|
||
+ gpio_direction_output(chost->sel_gpio, 1);
|
||
+
|
||
+ gpio_set_value(chost->clk_gpio, 1);
|
||
+ gpio_set_value(chost->clk_gpio, 0);
|
||
+
|
||
+ cbus_host = chost;
|
||
+
|
||
+ return 0;
|
||
+exit3:
|
||
+ gpio_free(chost->dat_gpio);
|
||
+exit2:
|
||
+ gpio_free(chost->clk_gpio);
|
||
+exit1:
|
||
+ kfree(chost);
|
||
+ return ret;
|
||
+}
|
||
+
|
||
+subsys_initcall(cbus_bus_init);
|
||
+
|
||
+EXPORT_SYMBOL(cbus_host);
|
||
+EXPORT_SYMBOL(cbus_read_reg);
|
||
+EXPORT_SYMBOL(cbus_write_reg);
|
||
+
|
||
+MODULE_DESCRIPTION("CBUS serial protocol");
|
||
+MODULE_LICENSE("GPL");
|
||
+MODULE_AUTHOR("Juha Yrj<72>l<EFBFBD>, David Weinehall, and Mikko Ylinen");
|
||
diff --git a/drivers/cbus/cbus.h b/drivers/cbus/cbus.h
|
||
new file mode 100644
|
||
index 0000000..957224c
|
||
--- /dev/null
|
||
+++ b/drivers/cbus/cbus.h
|
||
@@ -0,0 +1,36 @@
|
||
+/*
|
||
+ * drivers/cbus/cbus.h
|
||
+ *
|
||
+ * Copyright (C) 2004, 2005 Nokia Corporation
|
||
+ *
|
||
+ * Written by Juha Yrj<72>l<EFBFBD> <juha.yrjola@nokia.com> and
|
||
+ * David Weinehall <david.weinehall@nokia.com>
|
||
+ *
|
||
+ * This file is subject to the terms and conditions of the GNU General
|
||
+ * Public License. See the file "COPYING" in the main directory of this
|
||
+ * archive for more details.
|
||
+ *
|
||
+ * This program is distributed in the hope that it will be useful,
|
||
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
+ * GNU General Public License for more details.
|
||
+ *
|
||
+ * You should have received a copy of the GNU General Public License
|
||
+ * along with this program; if not, write to the Free Software
|
||
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||
+ */
|
||
+
|
||
+#ifndef __DRIVERS_CBUS_CBUS_H
|
||
+#define __DRIVERS_CBUS_CBUS_H
|
||
+
|
||
+struct cbus_host {
|
||
+ int clk_gpio, dat_gpio, sel_gpio;
|
||
+ spinlock_t lock;
|
||
+};
|
||
+
|
||
+extern struct cbus_host *cbus_host;
|
||
+
|
||
+extern int cbus_read_reg(struct cbus_host *host, int dev, int reg);
|
||
+extern int cbus_write_reg(struct cbus_host *host, int dev, int reg, u16 val);
|
||
+
|
||
+#endif /* __DRIVERS_CBUS_CBUS_H */
|
||
diff --git a/drivers/cbus/retu-headset.c b/drivers/cbus/retu-headset.c
|
||
new file mode 100644
|
||
index 0000000..e798bc2
|
||
--- /dev/null
|
||
+++ b/drivers/cbus/retu-headset.c
|
||
@@ -0,0 +1,355 @@
|
||
+/**
|
||
+ * Retu/Vilma headset detection
|
||
+ *
|
||
+ * Copyright (C) 2006 Nokia Corporation
|
||
+ *
|
||
+ * Written by Juha Yrj<72>l<EFBFBD>
|
||
+ *
|
||
+ * This file is subject to the terms and conditions of the GNU General
|
||
+ * Public License. See the file "COPYING" in the main directory of this
|
||
+ * archive for more details.
|
||
+ *
|
||
+ * This program is distributed in the hope that it will be useful,
|
||
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
+ * GNU General Public License for more details.
|
||
+ *
|
||
+ * You should have received a copy of the GNU General Public License
|
||
+ * along with this program; if not, write to the Free Software
|
||
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||
+ */
|
||
+
|
||
+#include <linux/module.h>
|
||
+#include <linux/init.h>
|
||
+#include <linux/kernel.h>
|
||
+#include <linux/delay.h>
|
||
+#include <linux/input.h>
|
||
+#include <linux/platform_device.h>
|
||
+
|
||
+#include "retu.h"
|
||
+
|
||
+#define RETU_ADC_CHANNEL_HOOKDET 0x05
|
||
+
|
||
+#define RETU_HEADSET_KEY KEY_PHONE
|
||
+
|
||
+struct retu_headset {
|
||
+ spinlock_t lock;
|
||
+ struct mutex mutex;
|
||
+ struct platform_device *pdev;
|
||
+ struct input_dev *idev;
|
||
+ unsigned bias_enabled;
|
||
+ unsigned detection_enabled;
|
||
+ unsigned pressed;
|
||
+ struct timer_list enable_timer;
|
||
+ struct timer_list detect_timer;
|
||
+};
|
||
+
|
||
+static void retu_headset_set_bias(int enable)
|
||
+{
|
||
+ if (enable) {
|
||
+ retu_set_clear_reg_bits(RETU_REG_AUDTXR,
|
||
+ (1 << 0) | (1 << 1), 0);
|
||
+ msleep(2);
|
||
+ retu_set_clear_reg_bits(RETU_REG_AUDTXR, 1 << 3, 0);
|
||
+ } else {
|
||
+ retu_set_clear_reg_bits(RETU_REG_AUDTXR, 0,
|
||
+ (1 << 0) | (1 << 1) | (1 << 3));
|
||
+ }
|
||
+}
|
||
+
|
||
+static void retu_headset_enable(struct retu_headset *hs)
|
||
+{
|
||
+ mutex_lock(&hs->mutex);
|
||
+ if (!hs->bias_enabled) {
|
||
+ hs->bias_enabled = 1;
|
||
+ retu_headset_set_bias(1);
|
||
+ }
|
||
+ mutex_unlock(&hs->mutex);
|
||
+}
|
||
+
|
||
+static void retu_headset_disable(struct retu_headset *hs)
|
||
+{
|
||
+ mutex_lock(&hs->mutex);
|
||
+ if (hs->bias_enabled) {
|
||
+ hs->bias_enabled = 0;
|
||
+ retu_headset_set_bias(0);
|
||
+ }
|
||
+ mutex_unlock(&hs->mutex);
|
||
+}
|
||
+
|
||
+static void retu_headset_det_enable(struct retu_headset *hs)
|
||
+{
|
||
+ mutex_lock(&hs->mutex);
|
||
+ if (!hs->detection_enabled) {
|
||
+ hs->detection_enabled = 1;
|
||
+ retu_set_clear_reg_bits(RETU_REG_CC1, (1 << 10) | (1 << 8), 0);
|
||
+ retu_enable_irq(RETU_INT_HOOK);
|
||
+ }
|
||
+ mutex_unlock(&hs->mutex);
|
||
+}
|
||
+
|
||
+static void retu_headset_det_disable(struct retu_headset *hs)
|
||
+{
|
||
+ unsigned long flags;
|
||
+
|
||
+ mutex_lock(&hs->mutex);
|
||
+ if (hs->detection_enabled) {
|
||
+ hs->detection_enabled = 0;
|
||
+ retu_disable_irq(RETU_INT_HOOK);
|
||
+ del_timer_sync(&hs->enable_timer);
|
||
+ del_timer_sync(&hs->detect_timer);
|
||
+ spin_lock_irqsave(&hs->lock, flags);
|
||
+ if (hs->pressed)
|
||
+ input_report_key(hs->idev, RETU_HEADSET_KEY, 0);
|
||
+ spin_unlock_irqrestore(&hs->lock, flags);
|
||
+ retu_set_clear_reg_bits(RETU_REG_CC1, 0, (1 << 10) | (1 << 8));
|
||
+ }
|
||
+ mutex_unlock(&hs->mutex);
|
||
+}
|
||
+
|
||
+static ssize_t retu_headset_hookdet_show(struct device *dev,
|
||
+ struct device_attribute *attr,
|
||
+ char *buf)
|
||
+{
|
||
+ int val;
|
||
+
|
||
+ val = retu_read_adc(RETU_ADC_CHANNEL_HOOKDET);
|
||
+ return sprintf(buf, "%d\n", val);
|
||
+}
|
||
+
|
||
+static DEVICE_ATTR(hookdet, S_IRUGO, retu_headset_hookdet_show, NULL);
|
||
+
|
||
+static ssize_t retu_headset_enable_show(struct device *dev,
|
||
+ struct device_attribute *attr,
|
||
+ char *buf)
|
||
+{
|
||
+ struct retu_headset *hs = dev_get_drvdata(dev);
|
||
+
|
||
+ return sprintf(buf, "%u\n", hs->bias_enabled);
|
||
+}
|
||
+
|
||
+static ssize_t retu_headset_enable_store(struct device *dev,
|
||
+ struct device_attribute *attr,
|
||
+ const char *buf, size_t count)
|
||
+{
|
||
+ struct retu_headset *hs = dev_get_drvdata(dev);
|
||
+ int enable;
|
||
+
|
||
+ if (sscanf(buf, "%u", &enable) != 1)
|
||
+ return -EINVAL;
|
||
+ if (enable)
|
||
+ retu_headset_enable(hs);
|
||
+ else
|
||
+ retu_headset_disable(hs);
|
||
+ return count;
|
||
+}
|
||
+
|
||
+static DEVICE_ATTR(enable, S_IRUGO | S_IWUSR | S_IWGRP,
|
||
+ retu_headset_enable_show, retu_headset_enable_store);
|
||
+
|
||
+static ssize_t retu_headset_enable_det_show(struct device *dev,
|
||
+ struct device_attribute *attr,
|
||
+ char *buf)
|
||
+{
|
||
+ struct retu_headset *hs = dev_get_drvdata(dev);
|
||
+
|
||
+ return sprintf(buf, "%u\n", hs->detection_enabled);
|
||
+}
|
||
+
|
||
+static ssize_t retu_headset_enable_det_store(struct device *dev,
|
||
+ struct device_attribute *attr,
|
||
+ const char *buf, size_t count)
|
||
+{
|
||
+ struct retu_headset *hs = dev_get_drvdata(dev);
|
||
+ int enable;
|
||
+
|
||
+ if (sscanf(buf, "%u", &enable) != 1)
|
||
+ return -EINVAL;
|
||
+ if (enable)
|
||
+ retu_headset_det_enable(hs);
|
||
+ else
|
||
+ retu_headset_det_disable(hs);
|
||
+ return count;
|
||
+}
|
||
+
|
||
+static DEVICE_ATTR(enable_det, S_IRUGO | S_IWUSR | S_IWGRP,
|
||
+ retu_headset_enable_det_show,
|
||
+ retu_headset_enable_det_store);
|
||
+
|
||
+static void retu_headset_hook_interrupt(unsigned long arg)
|
||
+{
|
||
+ struct retu_headset *hs = (struct retu_headset *) arg;
|
||
+ unsigned long flags;
|
||
+
|
||
+ retu_ack_irq(RETU_INT_HOOK);
|
||
+ spin_lock_irqsave(&hs->lock, flags);
|
||
+ if (!hs->pressed) {
|
||
+ /* Headset button was just pressed down. */
|
||
+ hs->pressed = 1;
|
||
+ input_report_key(hs->idev, RETU_HEADSET_KEY, 1);
|
||
+ }
|
||
+ spin_unlock_irqrestore(&hs->lock, flags);
|
||
+ retu_set_clear_reg_bits(RETU_REG_CC1, 0, (1 << 10) | (1 << 8));
|
||
+ mod_timer(&hs->enable_timer, jiffies + msecs_to_jiffies(50));
|
||
+}
|
||
+
|
||
+static void retu_headset_enable_timer(unsigned long arg)
|
||
+{
|
||
+ struct retu_headset *hs = (struct retu_headset *) arg;
|
||
+
|
||
+ retu_set_clear_reg_bits(RETU_REG_CC1, (1 << 10) | (1 << 8), 0);
|
||
+ mod_timer(&hs->detect_timer, jiffies + msecs_to_jiffies(350));
|
||
+}
|
||
+
|
||
+static void retu_headset_detect_timer(unsigned long arg)
|
||
+{
|
||
+ struct retu_headset *hs = (struct retu_headset *) arg;
|
||
+ unsigned long flags;
|
||
+
|
||
+ spin_lock_irqsave(&hs->lock, flags);
|
||
+ if (hs->pressed) {
|
||
+ hs->pressed = 0;
|
||
+ input_report_key(hs->idev, RETU_HEADSET_KEY, 0);
|
||
+ }
|
||
+ spin_unlock_irqrestore(&hs->lock, flags);
|
||
+}
|
||
+
|
||
+static int __init retu_headset_probe(struct platform_device *pdev)
|
||
+{
|
||
+ struct retu_headset *hs;
|
||
+ int r;
|
||
+
|
||
+ hs = kzalloc(sizeof(*hs), GFP_KERNEL);
|
||
+ if (hs == NULL)
|
||
+ return -ENOMEM;
|
||
+
|
||
+ hs->pdev = pdev;
|
||
+
|
||
+ hs->idev = input_allocate_device();
|
||
+ if (hs->idev == NULL) {
|
||
+ r = -ENOMEM;
|
||
+ goto err1;
|
||
+ }
|
||
+ hs->idev->name = "retu-headset";
|
||
+ hs->idev->dev.parent = &pdev->dev;
|
||
+ set_bit(EV_KEY, hs->idev->evbit);
|
||
+ set_bit(RETU_HEADSET_KEY, hs->idev->keybit);
|
||
+ r = input_register_device(hs->idev);
|
||
+ if (r < 0)
|
||
+ goto err2;
|
||
+
|
||
+ r = device_create_file(&pdev->dev, &dev_attr_hookdet);
|
||
+ if (r < 0)
|
||
+ goto err3;
|
||
+ r = device_create_file(&pdev->dev, &dev_attr_enable);
|
||
+ if (r < 0)
|
||
+ goto err4;
|
||
+ r = device_create_file(&pdev->dev, &dev_attr_enable_det);
|
||
+ if (r < 0)
|
||
+ goto err5;
|
||
+ platform_set_drvdata(pdev, hs);
|
||
+
|
||
+ spin_lock_init(&hs->lock);
|
||
+ mutex_init(&hs->mutex);
|
||
+ setup_timer(&hs->enable_timer, retu_headset_enable_timer,
|
||
+ (unsigned long) hs);
|
||
+ setup_timer(&hs->detect_timer, retu_headset_detect_timer,
|
||
+ (unsigned long) hs);
|
||
+
|
||
+ r = retu_request_irq(RETU_INT_HOOK, retu_headset_hook_interrupt,
|
||
+ (unsigned long) hs, "hookdet");
|
||
+ if (r != 0) {
|
||
+ dev_err(&pdev->dev, "hookdet IRQ not available\n");
|
||
+ goto err6;
|
||
+ }
|
||
+ retu_disable_irq(RETU_INT_HOOK);
|
||
+ return 0;
|
||
+err6:
|
||
+ device_remove_file(&pdev->dev, &dev_attr_enable_det);
|
||
+err5:
|
||
+ device_remove_file(&pdev->dev, &dev_attr_enable);
|
||
+err4:
|
||
+ device_remove_file(&pdev->dev, &dev_attr_hookdet);
|
||
+err3:
|
||
+ input_unregister_device(hs->idev);
|
||
+err2:
|
||
+ input_free_device(hs->idev);
|
||
+err1:
|
||
+ kfree(hs);
|
||
+ return r;
|
||
+}
|
||
+
|
||
+static int retu_headset_remove(struct platform_device *pdev)
|
||
+{
|
||
+ struct retu_headset *hs = platform_get_drvdata(pdev);
|
||
+
|
||
+ device_remove_file(&pdev->dev, &dev_attr_hookdet);
|
||
+ device_remove_file(&pdev->dev, &dev_attr_enable);
|
||
+ device_remove_file(&pdev->dev, &dev_attr_enable_det);
|
||
+ retu_headset_disable(hs);
|
||
+ retu_headset_det_disable(hs);
|
||
+ retu_free_irq(RETU_INT_HOOK);
|
||
+ input_unregister_device(hs->idev);
|
||
+ input_free_device(hs->idev);
|
||
+ return 0;
|
||
+}
|
||
+
|
||
+static int retu_headset_suspend(struct platform_device *pdev,
|
||
+ pm_message_t mesg)
|
||
+{
|
||
+ struct retu_headset *hs = platform_get_drvdata(pdev);
|
||
+
|
||
+ mutex_lock(&hs->mutex);
|
||
+ if (hs->bias_enabled)
|
||
+ retu_headset_set_bias(0);
|
||
+ mutex_unlock(&hs->mutex);
|
||
+
|
||
+ return 0;
|
||
+}
|
||
+
|
||
+static int retu_headset_resume(struct platform_device *pdev)
|
||
+{
|
||
+ struct retu_headset *hs = platform_get_drvdata(pdev);
|
||
+
|
||
+ mutex_lock(&hs->mutex);
|
||
+ if (hs->bias_enabled)
|
||
+ retu_headset_set_bias(1);
|
||
+ mutex_unlock(&hs->mutex);
|
||
+
|
||
+ return 0;
|
||
+}
|
||
+
|
||
+static struct platform_driver retu_headset_driver = {
|
||
+ .probe = retu_headset_probe,
|
||
+ .remove = retu_headset_remove,
|
||
+ .suspend = retu_headset_suspend,
|
||
+ .resume = retu_headset_resume,
|
||
+ .driver = {
|
||
+ .name = "retu-headset",
|
||
+ },
|
||
+};
|
||
+
|
||
+static int __init retu_headset_init(void)
|
||
+{
|
||
+ int r;
|
||
+
|
||
+ printk(KERN_INFO "Retu/Vilma headset driver initializing\n");
|
||
+
|
||
+ r = platform_driver_register(&retu_headset_driver);
|
||
+ if (r < 0)
|
||
+ return r;
|
||
+
|
||
+ return 0;
|
||
+}
|
||
+
|
||
+static void __exit retu_headset_exit(void)
|
||
+{
|
||
+ platform_driver_unregister(&retu_headset_driver);
|
||
+}
|
||
+
|
||
+module_init(retu_headset_init);
|
||
+module_exit(retu_headset_exit);
|
||
+
|
||
+MODULE_DESCRIPTION("Retu/Vilma headset detection");
|
||
+MODULE_LICENSE("GPL");
|
||
+MODULE_AUTHOR("Juha Yrj<72>l<EFBFBD>");
|
||
diff --git a/drivers/cbus/retu-pwrbutton.c b/drivers/cbus/retu-pwrbutton.c
|
||
new file mode 100644
|
||
index 0000000..38d7aa4
|
||
--- /dev/null
|
||
+++ b/drivers/cbus/retu-pwrbutton.c
|
||
@@ -0,0 +1,118 @@
|
||
+/**
|
||
+ * drivers/cbus/retu-pwrbutton.c
|
||
+ *
|
||
+ * Driver for sending retu power button event to input-layer
|
||
+ *
|
||
+ * Copyright (C) 2004 Nokia Corporation
|
||
+ *
|
||
+ * Written by Ari Saastamoinen <ari.saastamoinen@elektrobit.com>
|
||
+ *
|
||
+ * Contact Juha Yrj<72>l<EFBFBD> <juha.yrjola@nokia.com>
|
||
+ *
|
||
+ * This file is subject to the terms and conditions of the GNU General
|
||
+ * Public License. See the file "COPYING" in the main directory of this
|
||
+ * archive for more details.
|
||
+ *
|
||
+ * This program is distributed in the hope that it will be useful,
|
||
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
+ * GNU General Public License for more details.
|
||
+ *
|
||
+ * You should have received a copy of the GNU General Public License
|
||
+ * along with this program; if not, write to the Free Software
|
||
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||
+ */
|
||
+
|
||
+#include <linux/module.h>
|
||
+#include <linux/init.h>
|
||
+#include <linux/kernel.h>
|
||
+#include <linux/errno.h>
|
||
+#include <linux/input.h>
|
||
+#include <linux/timer.h>
|
||
+#include <linux/jiffies.h>
|
||
+#include <linux/bitops.h>
|
||
+
|
||
+#include "retu.h"
|
||
+
|
||
+#define RETU_STATUS_PWRONX (1 << 5)
|
||
+
|
||
+#define PWRBTN_DELAY 20
|
||
+#define PWRBTN_UP 0
|
||
+#define PWRBTN_PRESSED 1
|
||
+
|
||
+static int pwrbtn_state;
|
||
+static struct input_dev *pwrbtn_dev;
|
||
+static struct timer_list pwrbtn_timer;
|
||
+
|
||
+static void retubutton_timer_func(unsigned long arg)
|
||
+{
|
||
+ int state;
|
||
+
|
||
+ if (retu_read_reg(RETU_REG_STATUS) & RETU_STATUS_PWRONX)
|
||
+ state = PWRBTN_UP;
|
||
+ else
|
||
+ state = PWRBTN_PRESSED;
|
||
+
|
||
+ if (pwrbtn_state != state) {
|
||
+ input_report_key(pwrbtn_dev, KEY_POWER, state);
|
||
+ pwrbtn_state = state;
|
||
+ }
|
||
+}
|
||
+
|
||
+/**
|
||
+ * Interrupt function is called whenever power button key is pressed
|
||
+ * or released.
|
||
+ */
|
||
+static void retubutton_irq(unsigned long arg)
|
||
+{
|
||
+ retu_ack_irq(RETU_INT_PWR);
|
||
+ mod_timer(&pwrbtn_timer, jiffies + msecs_to_jiffies(PWRBTN_DELAY));
|
||
+}
|
||
+
|
||
+/**
|
||
+ * Init function.
|
||
+ * Allocates interrupt for power button and registers itself to input layer.
|
||
+ */
|
||
+static int __init retubutton_init(void)
|
||
+{
|
||
+ int irq;
|
||
+
|
||
+ printk(KERN_INFO "Retu power button driver initialized\n");
|
||
+ irq = RETU_INT_PWR;
|
||
+
|
||
+ init_timer(&pwrbtn_timer);
|
||
+ pwrbtn_timer.function = retubutton_timer_func;
|
||
+
|
||
+ if (retu_request_irq(irq, &retubutton_irq, 0, "PwrOnX") < 0) {
|
||
+ printk(KERN_ERR "%s@%s: Cannot allocate irq\n",
|
||
+ __FUNCTION__, __FILE__);
|
||
+ return -EBUSY;
|
||
+ }
|
||
+
|
||
+ pwrbtn_dev = input_allocate_device();
|
||
+ if (!pwrbtn_dev)
|
||
+ return -ENOMEM;
|
||
+
|
||
+ pwrbtn_dev->evbit[0] = BIT_MASK(EV_KEY);
|
||
+ pwrbtn_dev->keybit[BIT_WORD(KEY_POWER)] = BIT_MASK(KEY_POWER);
|
||
+ pwrbtn_dev->name = "retu-pwrbutton";
|
||
+
|
||
+ return input_register_device(pwrbtn_dev);
|
||
+}
|
||
+
|
||
+/**
|
||
+ * Cleanup function which is called when driver is unloaded
|
||
+ */
|
||
+static void __exit retubutton_exit(void)
|
||
+{
|
||
+ retu_free_irq(RETU_INT_PWR);
|
||
+ del_timer_sync(&pwrbtn_timer);
|
||
+ input_unregister_device(pwrbtn_dev);
|
||
+}
|
||
+
|
||
+module_init(retubutton_init);
|
||
+module_exit(retubutton_exit);
|
||
+
|
||
+MODULE_DESCRIPTION("Retu Power Button");
|
||
+MODULE_LICENSE("GPL");
|
||
+MODULE_AUTHOR("Ari Saastamoinen");
|
||
diff --git a/drivers/cbus/retu-rtc.c b/drivers/cbus/retu-rtc.c
|
||
new file mode 100644
|
||
index 0000000..1ebc33b
|
||
--- /dev/null
|
||
+++ b/drivers/cbus/retu-rtc.c
|
||
@@ -0,0 +1,477 @@
|
||
+/**
|
||
+ * drivers/cbus/retu-rtc.c
|
||
+ *
|
||
+ * Support for Retu RTC
|
||
+ *
|
||
+ * Copyright (C) 2004, 2005 Nokia Corporation
|
||
+ *
|
||
+ * Written by Paul Mundt <paul.mundt@nokia.com> and
|
||
+ * Igor Stoppa <igor.stoppa@nokia.com>
|
||
+ *
|
||
+ * The Retu RTC is essentially a partial read-only RTC that gives us Retu's
|
||
+ * idea of what time actually is. It's left as a userspace excercise to map
|
||
+ * this back to time in the real world and ensure that calibration settings
|
||
+ * are sane to compensate for any horrible drift (on account of not being able
|
||
+ * to set the clock to anything).
|
||
+ *
|
||
+ * Days are semi-writeable. Namely, Retu will only track 255 days for us
|
||
+ * consecutively, after which the counter is explicitly stuck at 255 until
|
||
+ * someone comes along and clears it with a write. In the event that no one
|
||
+ * comes along and clears it, we no longer have any idea what day it is.
|
||
+ *
|
||
+ * This file is subject to the terms and conditions of the GNU General
|
||
+ * Public License. See the file "COPYING" in the main directory of this
|
||
+ * archive for more details.
|
||
+ *
|
||
+ * This program is distributed in the hope that it will be useful,
|
||
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
+ * GNU General Public License for more details.
|
||
+ *
|
||
+ * You should have received a copy of the GNU General Public License
|
||
+ * along with this program; if not, write to the Free Software
|
||
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||
+ */
|
||
+
|
||
+#include <linux/device.h>
|
||
+#include <linux/init.h>
|
||
+#include <linux/kernel.h>
|
||
+#include <linux/module.h>
|
||
+#include <linux/completion.h>
|
||
+#include <linux/platform_device.h>
|
||
+#include <linux/mutex.h>
|
||
+#include <linux/workqueue.h>
|
||
+
|
||
+#include "cbus.h"
|
||
+#include "retu.h"
|
||
+
|
||
+static struct mutex retu_rtc_mutex;
|
||
+static u16 retu_rtc_alarm_expired;
|
||
+static u16 retu_rtc_reset_occurred;
|
||
+
|
||
+static DECLARE_COMPLETION(retu_rtc_exited);
|
||
+static DECLARE_COMPLETION(retu_rtc_sync);
|
||
+
|
||
+static void retu_rtc_barrier(void);
|
||
+
|
||
+static void retu_rtc_device_release(struct device *dev)
|
||
+{
|
||
+ complete(&retu_rtc_exited);
|
||
+}
|
||
+
|
||
+static ssize_t retu_rtc_time_show(struct device *dev, struct device_attribute *attr,
|
||
+ char *buf)
|
||
+{
|
||
+ u16 dsr, hmr, dsr2;
|
||
+
|
||
+ mutex_lock(&retu_rtc_mutex);
|
||
+
|
||
+ do {
|
||
+ u16 dummy;
|
||
+
|
||
+ /*
|
||
+ * Not being in_interrupt() for a retu rtc IRQ, we need to
|
||
+ * read twice for consistency..
|
||
+ */
|
||
+ dummy = retu_read_reg(RETU_REG_RTCDSR);
|
||
+ dsr = retu_read_reg(RETU_REG_RTCDSR);
|
||
+
|
||
+ dummy = retu_read_reg(RETU_REG_RTCHMR);
|
||
+ hmr = retu_read_reg(RETU_REG_RTCHMR);
|
||
+
|
||
+ dummy = retu_read_reg(RETU_REG_RTCDSR);
|
||
+ dsr2 = retu_read_reg(RETU_REG_RTCDSR);
|
||
+ } while ((dsr != dsr2));
|
||
+
|
||
+ mutex_unlock(&retu_rtc_mutex);
|
||
+
|
||
+ /*
|
||
+ * Format a 32-bit date-string for userspace
|
||
+ *
|
||
+ * days | hours | minutes | seconds
|
||
+ *
|
||
+ * 8 bits for each.
|
||
+ *
|
||
+ * This mostly sucks because days and seconds are tracked in RTCDSR
|
||
+ * while hours and minutes are tracked in RTCHMR. And yes, there
|
||
+ * really are no words that can describe an 8 bit day register (or
|
||
+ * rather, none that will be reprinted here).
|
||
+ */
|
||
+ return sprintf(buf, "0x%08x\n", (((dsr >> 8) & 0xff) << 24) |
|
||
+ (((hmr >> 8) & 0x1f) << 16) |
|
||
+ ((hmr & 0x3f) << 8) | (dsr & 0x3f));
|
||
+}
|
||
+
|
||
+static ssize_t retu_rtc_time_store(struct device *dev, struct device_attribute *attr,
|
||
+ const char *buf, size_t count)
|
||
+{
|
||
+ mutex_lock(&retu_rtc_mutex);
|
||
+ /*
|
||
+ * Writing anything to the day counter forces it to 0
|
||
+ * The seconds counter would be cleared by resetting the minutes counter,
|
||
+ * however this won't happen, since we are using the hh:mm counters as
|
||
+ * a set of free running counters and the day counter as a multiple
|
||
+ * overflow holder.
|
||
+ */
|
||
+
|
||
+ /* Reset day counter, but keep Temperature Shutdown state */
|
||
+ retu_write_reg(RETU_REG_RTCDSR,
|
||
+ retu_read_reg(RETU_REG_RTCDSR) & (1 << 6));
|
||
+
|
||
+ mutex_unlock(&retu_rtc_mutex);
|
||
+
|
||
+ return count;
|
||
+}
|
||
+
|
||
+static DEVICE_ATTR(time, S_IRUGO | S_IWUSR, retu_rtc_time_show,
|
||
+ retu_rtc_time_store);
|
||
+
|
||
+
|
||
+static ssize_t retu_rtc_reset_show(struct device *dev, struct device_attribute *attr, char *buf)
|
||
+{
|
||
+ /*
|
||
+ * Returns the status of the rtc
|
||
+ *
|
||
+ * 0: no reset has occurred or the status has been cleared
|
||
+ * 1: a reset has occurred
|
||
+ *
|
||
+ * RTC needs to be reset only when both main battery
|
||
+ * _AND_ backup battery are discharged
|
||
+ */
|
||
+ return sprintf(buf, "%u\n", retu_rtc_reset_occurred);
|
||
+}
|
||
+
|
||
+static void retu_rtc_do_reset(void)
|
||
+{
|
||
+ u16 ccr1;
|
||
+
|
||
+ ccr1 = retu_read_reg(RETU_REG_CC1);
|
||
+ /* RTC in reset */
|
||
+ retu_write_reg(RETU_REG_CC1, ccr1 | 0x0001);
|
||
+ /* RTC in normal operating mode */
|
||
+ retu_write_reg(RETU_REG_CC1, ccr1 & ~0x0001);
|
||
+
|
||
+ retu_rtc_barrier();
|
||
+ /* Disable alarm and RTC WD */
|
||
+ retu_write_reg(RETU_REG_RTCHMAR, 0x7f3f);
|
||
+ /* Set Calibration register to default value */
|
||
+ retu_write_reg(RETU_REG_RTCCALR, 0x00c0);
|
||
+
|
||
+ retu_rtc_alarm_expired = 0;
|
||
+ retu_rtc_reset_occurred = 1;
|
||
+}
|
||
+
|
||
+static ssize_t retu_rtc_reset_store(struct device *dev, struct device_attribute *attr,
|
||
+ const char *buf, size_t count)
|
||
+{
|
||
+ unsigned choice;
|
||
+
|
||
+ if(sscanf(buf, "%u", &choice) != 1)
|
||
+ return count;
|
||
+ mutex_lock(&retu_rtc_mutex);
|
||
+ if (choice == 0)
|
||
+ retu_rtc_reset_occurred = 0;
|
||
+ else if (choice == 1)
|
||
+ retu_rtc_do_reset();
|
||
+ mutex_unlock(&retu_rtc_mutex);
|
||
+ return count;
|
||
+}
|
||
+
|
||
+static DEVICE_ATTR(reset, S_IRUGO | S_IWUSR, retu_rtc_reset_show,
|
||
+ retu_rtc_reset_store);
|
||
+
|
||
+static ssize_t retu_rtc_alarm_show(struct device *dev, struct device_attribute *attr,
|
||
+ char *buf)
|
||
+{
|
||
+ u16 chmar;
|
||
+ ssize_t retval;
|
||
+
|
||
+ mutex_lock(&retu_rtc_mutex);
|
||
+ /*
|
||
+ * Format a 16-bit date-string for userspace
|
||
+ *
|
||
+ * hours | minutes
|
||
+ * 8 bits for each.
|
||
+ */
|
||
+ chmar = retu_read_reg(RETU_REG_RTCHMAR);
|
||
+ /* No shifting needed, only masking unrelated bits */
|
||
+ retval = sprintf(buf, "0x%04x\n", chmar & 0x1f3f);
|
||
+ mutex_unlock(&retu_rtc_mutex);
|
||
+
|
||
+ return retval;
|
||
+}
|
||
+
|
||
+static ssize_t retu_rtc_alarm_store(struct device *dev, struct device_attribute *attr,
|
||
+ const char *buf, size_t count)
|
||
+{
|
||
+ u16 chmar;
|
||
+ unsigned alrm;
|
||
+ unsigned hours;
|
||
+ unsigned minutes;
|
||
+
|
||
+ mutex_lock(&retu_rtc_mutex);
|
||
+
|
||
+ if(sscanf(buf, "%x", &alrm) != 1)
|
||
+ return count;
|
||
+ hours = (alrm >> 8) & 0x001f;
|
||
+ minutes = (alrm >> 0) & 0x003f;
|
||
+ if ((hours < 24 && minutes < 60) || (hours == 24 && minutes == 60)) {
|
||
+ /*
|
||
+ * OK, the time format for the alarm is valid (including the
|
||
+ * disabling values)
|
||
+ */
|
||
+ /* Keeps the RTC watchdog status */
|
||
+ chmar = retu_read_reg(RETU_REG_RTCHMAR) & 0x6000;
|
||
+ chmar |= alrm & 0x1f3f; /* Stores the requested alarm */
|
||
+ retu_rtc_barrier();
|
||
+ retu_write_reg(RETU_REG_RTCHMAR, chmar);
|
||
+ /* If the alarm is being disabled */
|
||
+ if (hours == 24 && minutes == 60) {
|
||
+ /* disable the interrupt */
|
||
+ retu_disable_irq(RETU_INT_RTCA);
|
||
+ retu_rtc_alarm_expired = 0;
|
||
+ } else
|
||
+ /* enable the interrupt */
|
||
+ retu_enable_irq(RETU_INT_RTCA);
|
||
+ }
|
||
+ mutex_unlock(&retu_rtc_mutex);
|
||
+
|
||
+ return count;
|
||
+}
|
||
+
|
||
+static DEVICE_ATTR(alarm, S_IRUGO | S_IWUSR, retu_rtc_alarm_show,
|
||
+ retu_rtc_alarm_store);
|
||
+
|
||
+static ssize_t retu_rtc_alarm_expired_show(struct device *dev, struct device_attribute *attr,
|
||
+ char *buf)
|
||
+{
|
||
+ ssize_t retval;
|
||
+
|
||
+ retval = sprintf(buf, "%u\n", retu_rtc_alarm_expired);
|
||
+
|
||
+ return retval;
|
||
+}
|
||
+
|
||
+static ssize_t retu_rtc_alarm_expired_store(struct device *dev, struct device_attribute *attr,
|
||
+ const char *buf, size_t count)
|
||
+{
|
||
+ retu_rtc_alarm_expired = 0;
|
||
+
|
||
+ return count;
|
||
+}
|
||
+
|
||
+static DEVICE_ATTR(alarm_expired, S_IRUGO | S_IWUSR, retu_rtc_alarm_expired_show,
|
||
+ retu_rtc_alarm_expired_store);
|
||
+
|
||
+
|
||
+static ssize_t retu_rtc_cal_show(struct device *dev, struct device_attribute *attr,
|
||
+ char *buf)
|
||
+{
|
||
+ u16 rtccalr1;
|
||
+
|
||
+ mutex_lock(&retu_rtc_mutex);
|
||
+ rtccalr1 = retu_read_reg(RETU_REG_RTCCALR);
|
||
+ mutex_unlock(&retu_rtc_mutex);
|
||
+
|
||
+ /*
|
||
+ * Shows the status of the Calibration Register.
|
||
+ *
|
||
+ * Default, after power loss: 0x0000
|
||
+ * Default, for R&D: 0x00C0
|
||
+ * Default, for factory: 0x00??
|
||
+ *
|
||
+ */
|
||
+ return sprintf(buf, "0x%04x\n", rtccalr1 & 0x00ff);
|
||
+}
|
||
+
|
||
+static ssize_t retu_rtc_cal_store(struct device *dev, struct device_attribute *attr,
|
||
+ const char *buf, size_t count)
|
||
+{
|
||
+ unsigned calibration_value;
|
||
+
|
||
+ if (sscanf(buf, "%x", &calibration_value) != 1)
|
||
+ return count;
|
||
+
|
||
+ mutex_lock(&retu_rtc_mutex);
|
||
+ retu_rtc_barrier();
|
||
+ retu_write_reg(RETU_REG_RTCCALR, calibration_value & 0x00ff);
|
||
+ mutex_unlock(&retu_rtc_mutex);
|
||
+
|
||
+ return count;
|
||
+}
|
||
+
|
||
+static DEVICE_ATTR(cal, S_IRUGO | S_IWUSR, retu_rtc_cal_show,
|
||
+ retu_rtc_cal_store);
|
||
+
|
||
+static struct platform_device retu_rtc_device;
|
||
+
|
||
+static void retu_rtca_disable(void)
|
||
+{
|
||
+ retu_disable_irq(RETU_INT_RTCA);
|
||
+ retu_rtc_alarm_expired = 1;
|
||
+ retu_rtc_barrier();
|
||
+ retu_write_reg(RETU_REG_RTCHMAR, (24 << 8) | 60);
|
||
+}
|
||
+
|
||
+static void retu_rtca_expired(struct work_struct *unused)
|
||
+{
|
||
+ retu_rtca_disable();
|
||
+ sysfs_notify(&retu_rtc_device.dev.kobj, NULL, "alarm_expired");
|
||
+}
|
||
+
|
||
+DECLARE_WORK(retu_rtca_work, retu_rtca_expired);
|
||
+
|
||
+/*
|
||
+ * RTCHMR RTCHMAR RTCCAL must be accessed within 0.9 s since the seconds
|
||
+ * interrupt has been signaled in the IDR register
|
||
+ */
|
||
+static void retu_rtcs_interrupt(unsigned long unused)
|
||
+{
|
||
+ retu_ack_irq(RETU_INT_RTCS);
|
||
+ complete_all(&retu_rtc_sync);
|
||
+}
|
||
+
|
||
+static void retu_rtca_interrupt(unsigned long unused)
|
||
+{
|
||
+ retu_ack_irq(RETU_INT_RTCA);
|
||
+ schedule_work(&retu_rtca_work);
|
||
+}
|
||
+
|
||
+static int retu_rtc_init_irq(void)
|
||
+{
|
||
+ int ret;
|
||
+
|
||
+ ret = retu_request_irq(RETU_INT_RTCS, retu_rtcs_interrupt, 0, "RTCS");
|
||
+ if (ret != 0)
|
||
+ return ret;
|
||
+ /*
|
||
+ * We will take care of enabling and disabling the interrupt
|
||
+ * elsewhere, so leave it off by default..
|
||
+ */
|
||
+ retu_disable_irq(RETU_INT_RTCS);
|
||
+
|
||
+ ret = retu_request_irq(RETU_INT_RTCA, retu_rtca_interrupt, 0, "RTCA");
|
||
+ if (ret != 0) {
|
||
+ retu_free_irq(RETU_INT_RTCS);
|
||
+ return ret;
|
||
+ }
|
||
+ retu_disable_irq(RETU_INT_RTCA);
|
||
+
|
||
+ return 0;
|
||
+}
|
||
+
|
||
+
|
||
+static int __devinit retu_rtc_probe(struct device *dev)
|
||
+{
|
||
+ int r;
|
||
+
|
||
+ retu_rtc_alarm_expired = retu_read_reg(RETU_REG_IDR) &
|
||
+ (0x1 << RETU_INT_RTCA);
|
||
+
|
||
+ if ((r = retu_rtc_init_irq()) != 0)
|
||
+ return r;
|
||
+
|
||
+ mutex_init(&retu_rtc_mutex);
|
||
+
|
||
+ /* If the calibration register is zero, we've probably lost
|
||
+ * power */
|
||
+ if (retu_read_reg(RETU_REG_RTCCALR) & 0x00ff)
|
||
+ retu_rtc_reset_occurred = 0;
|
||
+ else
|
||
+ retu_rtc_do_reset();
|
||
+
|
||
+ if ((r = device_create_file(dev, &dev_attr_time)) != 0)
|
||
+ return r;
|
||
+ else if ((r = device_create_file(dev, &dev_attr_reset)) != 0)
|
||
+ goto err_unregister_time;
|
||
+ else if ((r = device_create_file(dev, &dev_attr_alarm)) != 0)
|
||
+ goto err_unregister_reset;
|
||
+ else if ((r = device_create_file(dev, &dev_attr_alarm_expired)) != 0)
|
||
+ goto err_unregister_alarm;
|
||
+ else if ((r = device_create_file(dev, &dev_attr_cal)) != 0)
|
||
+ goto err_unregister_alarm_expired;
|
||
+ else
|
||
+ return r;
|
||
+
|
||
+err_unregister_alarm_expired:
|
||
+ device_remove_file(dev, &dev_attr_alarm_expired);
|
||
+err_unregister_alarm:
|
||
+ device_remove_file(dev, &dev_attr_alarm);
|
||
+err_unregister_reset:
|
||
+ device_remove_file(dev, &dev_attr_reset);
|
||
+err_unregister_time:
|
||
+ device_remove_file(dev, &dev_attr_time);
|
||
+ return r;
|
||
+}
|
||
+
|
||
+static int __devexit retu_rtc_remove(struct device *dev)
|
||
+{
|
||
+ retu_disable_irq(RETU_INT_RTCS);
|
||
+ retu_free_irq(RETU_INT_RTCS);
|
||
+ retu_free_irq(RETU_INT_RTCA);
|
||
+ device_remove_file(dev, &dev_attr_cal);
|
||
+ device_remove_file(dev, &dev_attr_alarm_expired);
|
||
+ device_remove_file(dev, &dev_attr_alarm);
|
||
+ device_remove_file(dev, &dev_attr_reset);
|
||
+ device_remove_file(dev, &dev_attr_time);
|
||
+ return 0;
|
||
+}
|
||
+
|
||
+static struct device_driver retu_rtc_driver = {
|
||
+ .name = "retu-rtc",
|
||
+ .bus = &platform_bus_type,
|
||
+ .probe = retu_rtc_probe,
|
||
+ .remove = __devexit_p(retu_rtc_remove),
|
||
+};
|
||
+
|
||
+static struct platform_device retu_rtc_device = {
|
||
+ .name = "retu-rtc",
|
||
+ .id = -1,
|
||
+ .dev = {
|
||
+ .release = retu_rtc_device_release,
|
||
+ },
|
||
+};
|
||
+
|
||
+/* This function provides syncronization with the RTCS interrupt handler */
|
||
+static void retu_rtc_barrier(void)
|
||
+{
|
||
+ INIT_COMPLETION(retu_rtc_sync);
|
||
+ retu_ack_irq(RETU_INT_RTCS);
|
||
+ retu_enable_irq(RETU_INT_RTCS);
|
||
+ wait_for_completion(&retu_rtc_sync);
|
||
+ retu_disable_irq(RETU_INT_RTCS);
|
||
+}
|
||
+
|
||
+static int __init retu_rtc_init(void)
|
||
+{
|
||
+ int ret;
|
||
+
|
||
+ init_completion(&retu_rtc_exited);
|
||
+
|
||
+ if ((ret = driver_register(&retu_rtc_driver)) != 0)
|
||
+ return ret;
|
||
+
|
||
+ if ((ret = platform_device_register(&retu_rtc_device)) != 0)
|
||
+ goto err_unregister_driver;
|
||
+
|
||
+ return 0;
|
||
+
|
||
+err_unregister_driver:
|
||
+ driver_unregister(&retu_rtc_driver);
|
||
+ return ret;
|
||
+}
|
||
+
|
||
+static void __exit retu_rtc_exit(void)
|
||
+{
|
||
+ platform_device_unregister(&retu_rtc_device);
|
||
+ driver_unregister(&retu_rtc_driver);
|
||
+
|
||
+ wait_for_completion(&retu_rtc_exited);
|
||
+}
|
||
+
|
||
+module_init(retu_rtc_init);
|
||
+module_exit(retu_rtc_exit);
|
||
+
|
||
+MODULE_DESCRIPTION("Retu RTC");
|
||
+MODULE_LICENSE("GPL");
|
||
+MODULE_AUTHOR("Paul Mundt and Igor Stoppa");
|
||
diff --git a/drivers/cbus/retu-user.c b/drivers/cbus/retu-user.c
|
||
new file mode 100644
|
||
index 0000000..74a7d61
|
||
--- /dev/null
|
||
+++ b/drivers/cbus/retu-user.c
|
||
@@ -0,0 +1,423 @@
|
||
+/**
|
||
+ * drivers/cbus/retu-user.c
|
||
+ *
|
||
+ * Retu user space interface functions
|
||
+ *
|
||
+ * Copyright (C) 2004, 2005 Nokia Corporation
|
||
+ *
|
||
+ * Written by Mikko Ylinen <mikko.k.ylinen@nokia.com>
|
||
+ *
|
||
+ * This file is subject to the terms and conditions of the GNU General
|
||
+ * Public License. See the file "COPYING" in the main directory of this
|
||
+ * archive for more details.
|
||
+ *
|
||
+ * This program is distributed in the hope that it will be useful,
|
||
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
+ * GNU General Public License for more details.
|
||
+ *
|
||
+ * You should have received a copy of the GNU General Public License
|
||
+ * along with this program; if not, write to the Free Software
|
||
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||
+ */
|
||
+
|
||
+#include <linux/types.h>
|
||
+#include <linux/kernel.h>
|
||
+#include <linux/interrupt.h>
|
||
+#include <linux/module.h>
|
||
+#include <linux/init.h>
|
||
+#include <linux/fs.h>
|
||
+#include <linux/miscdevice.h>
|
||
+#include <linux/poll.h>
|
||
+#include <linux/list.h>
|
||
+#include <linux/spinlock.h>
|
||
+#include <linux/mutex.h>
|
||
+
|
||
+#include <asm/uaccess.h>
|
||
+
|
||
+#include "retu.h"
|
||
+
|
||
+#include "user_retu_tahvo.h"
|
||
+
|
||
+/* Maximum size of IRQ node buffer/pool */
|
||
+#define RETU_MAX_IRQ_BUF_LEN 16
|
||
+
|
||
+#define PFX "retu-user: "
|
||
+
|
||
+/* Bitmap for marking the interrupt sources as having the handlers */
|
||
+static u32 retu_irq_bits;
|
||
+
|
||
+/* For allowing only one user process to subscribe to the retu interrupts */
|
||
+static struct file *retu_irq_subscr = NULL;
|
||
+
|
||
+/* For poll and IRQ passing */
|
||
+struct retu_irq {
|
||
+ u32 id;
|
||
+ struct list_head node;
|
||
+};
|
||
+
|
||
+static spinlock_t retu_irqs_lock;
|
||
+static struct retu_irq *retu_irq_block;
|
||
+static LIST_HEAD(retu_irqs);
|
||
+static LIST_HEAD(retu_irqs_reserve);
|
||
+
|
||
+/* Wait queue - used when user wants to read the device */
|
||
+DECLARE_WAIT_QUEUE_HEAD(retu_user_waitqueue);
|
||
+
|
||
+/* Semaphore to protect irq subscription sequence */
|
||
+static struct mutex retu_mutex;
|
||
+
|
||
+/* This array specifies RETU register types (read/write/toggle) */
|
||
+static const u8 retu_access_bits[] = {
|
||
+ 1,
|
||
+ 4,
|
||
+ 3,
|
||
+ 3,
|
||
+ 1,
|
||
+ 3,
|
||
+ 3,
|
||
+ 0,
|
||
+ 3,
|
||
+ 3,
|
||
+ 3,
|
||
+ 3,
|
||
+ 3,
|
||
+ 3,
|
||
+ 3,
|
||
+ 4,
|
||
+ 4,
|
||
+ 3,
|
||
+ 0,
|
||
+ 0,
|
||
+ 0,
|
||
+ 0,
|
||
+ 1,
|
||
+ 3,
|
||
+ 3,
|
||
+ 3,
|
||
+ 3,
|
||
+ 3,
|
||
+ 3,
|
||
+ 3,
|
||
+ 3,
|
||
+ 3
|
||
+};
|
||
+
|
||
+/*
|
||
+ * The handler for all RETU interrupts.
|
||
+ *
|
||
+ * arg is the interrupt source in RETU.
|
||
+ */
|
||
+static void retu_user_irq_handler(unsigned long arg)
|
||
+{
|
||
+ struct retu_irq *irq;
|
||
+
|
||
+ retu_ack_irq(arg);
|
||
+
|
||
+ spin_lock(&retu_irqs_lock);
|
||
+ if (list_empty(&retu_irqs_reserve)) {
|
||
+ spin_unlock(&retu_irqs_lock);
|
||
+ return;
|
||
+ }
|
||
+ irq = list_entry((&retu_irqs_reserve)->next, struct retu_irq, node);
|
||
+ irq->id = arg;
|
||
+ list_move_tail(&irq->node, &retu_irqs);
|
||
+ spin_unlock(&retu_irqs_lock);
|
||
+
|
||
+ /* wake up waiting thread */
|
||
+ wake_up(&retu_user_waitqueue);
|
||
+}
|
||
+
|
||
+/*
|
||
+ * This routine sets up the interrupt handler and marks an interrupt source
|
||
+ * in RETU as a candidate for signal delivery to the user process.
|
||
+ */
|
||
+static int retu_user_subscribe_to_irq(int id, struct file *filp)
|
||
+{
|
||
+ int ret;
|
||
+
|
||
+ mutex_lock(&retu_mutex);
|
||
+ if ((retu_irq_subscr != NULL) && (retu_irq_subscr != filp)) {
|
||
+ mutex_unlock(&retu_mutex);
|
||
+ return -EBUSY;
|
||
+ }
|
||
+ /* Store the file pointer of the first user process registering IRQs */
|
||
+ retu_irq_subscr = filp;
|
||
+ mutex_unlock(&retu_mutex);
|
||
+
|
||
+ if (retu_irq_bits & (1 << id))
|
||
+ return 0;
|
||
+
|
||
+ ret = retu_request_irq(id, retu_user_irq_handler, id, "");
|
||
+ if (ret < 0)
|
||
+ return ret;
|
||
+
|
||
+ /* Mark that this interrupt has a handler */
|
||
+ retu_irq_bits |= 1 << id;
|
||
+
|
||
+ return 0;
|
||
+}
|
||
+
|
||
+/*
|
||
+ * Unregisters all RETU interrupt handlers.
|
||
+ */
|
||
+static void retu_unreg_irq_handlers(void)
|
||
+{
|
||
+ int id;
|
||
+
|
||
+ if (!retu_irq_bits)
|
||
+ return;
|
||
+
|
||
+ for (id = 0; id < MAX_RETU_IRQ_HANDLERS; id++)
|
||
+ if (retu_irq_bits & (1 << id))
|
||
+ retu_free_irq(id);
|
||
+
|
||
+ retu_irq_bits = 0;
|
||
+}
|
||
+
|
||
+/*
|
||
+ * Write to RETU register.
|
||
+ * Returns 0 upon success, a negative error value otherwise.
|
||
+ */
|
||
+static int retu_user_write_with_mask(u32 field, u16 value)
|
||
+{
|
||
+ u32 mask;
|
||
+ u32 reg;
|
||
+ u_short tmp;
|
||
+ unsigned long flags;
|
||
+
|
||
+ mask = MASK(field);
|
||
+ reg = REG(field);
|
||
+
|
||
+ /* Detect bad mask and reg */
|
||
+ if (mask == 0 || reg > RETU_REG_MAX ||
|
||
+ retu_access_bits[reg] == READ_ONLY) {
|
||
+ printk(KERN_ERR PFX "invalid arguments (reg=%#x, mask=%#x)\n",
|
||
+ reg, mask);
|
||
+ return -EINVAL;
|
||
+ }
|
||
+
|
||
+ /* Justify value according to mask */
|
||
+ while (!(mask & 1)) {
|
||
+ value = value << 1;
|
||
+ mask = mask >> 1;
|
||
+ }
|
||
+
|
||
+ spin_lock_irqsave(&retu_lock, flags);
|
||
+ if (retu_access_bits[reg] == TOGGLE) {
|
||
+ /* No need to detect previous content of register */
|
||
+ tmp = 0;
|
||
+ } else {
|
||
+ /* Read current value of register */
|
||
+ tmp = retu_read_reg(reg);
|
||
+ }
|
||
+
|
||
+ /* Generate new value */
|
||
+ tmp = (tmp & ~MASK(field)) | (value & MASK(field));
|
||
+ /* Write data to RETU */
|
||
+ retu_write_reg(reg, tmp);
|
||
+ spin_unlock_irqrestore(&retu_lock, flags);
|
||
+
|
||
+ return 0;
|
||
+}
|
||
+
|
||
+/*
|
||
+ * Read RETU register.
|
||
+ */
|
||
+static u32 retu_user_read_with_mask(u32 field)
|
||
+{
|
||
+ u_short value;
|
||
+ u32 mask, reg;
|
||
+
|
||
+ mask = MASK(field);
|
||
+ reg = REG(field);
|
||
+
|
||
+ /* Detect bad mask and reg */
|
||
+ if (mask == 0 || reg > RETU_REG_MAX) {
|
||
+ printk(KERN_ERR PFX "invalid arguments (reg=%#x, mask=%#x)\n",
|
||
+ reg, mask);
|
||
+ return -EINVAL;
|
||
+ }
|
||
+
|
||
+ /* Read the register */
|
||
+ value = retu_read_reg(reg) & mask;
|
||
+
|
||
+ /* Right justify value */
|
||
+ while (!(mask & 1)) {
|
||
+ value = value >> 1;
|
||
+ mask = mask >> 1;
|
||
+ }
|
||
+
|
||
+ return value;
|
||
+}
|
||
+
|
||
+/*
|
||
+ * Close device
|
||
+ */
|
||
+static int retu_close(struct inode *inode, struct file *filp)
|
||
+{
|
||
+ /* Unregister all interrupts that have been registered */
|
||
+ if (retu_irq_subscr == filp) {
|
||
+ retu_unreg_irq_handlers();
|
||
+ retu_irq_subscr = NULL;
|
||
+ }
|
||
+
|
||
+ return 0;
|
||
+}
|
||
+
|
||
+/*
|
||
+ * Device control (ioctl)
|
||
+ */
|
||
+static int retu_ioctl(struct inode *inode, struct file *filp,
|
||
+ unsigned int cmd, unsigned long arg)
|
||
+{
|
||
+ struct retu_tahvo_write_parms par;
|
||
+ int ret;
|
||
+
|
||
+ switch (cmd) {
|
||
+ case URT_IOCT_IRQ_SUBSCR:
|
||
+ return retu_user_subscribe_to_irq(arg, filp);
|
||
+ case RETU_IOCH_READ:
|
||
+ return retu_user_read_with_mask(arg);
|
||
+ case RETU_IOCX_WRITE:
|
||
+ ret = copy_from_user(&par, (void __user *) arg, sizeof(par));
|
||
+ if (ret)
|
||
+ printk(KERN_ERR "copy_from_user failed: %d\n", ret);
|
||
+ par.result = retu_user_write_with_mask(par.field, par.value);
|
||
+ ret = copy_to_user((void __user *) arg, &par, sizeof(par));
|
||
+ if (ret)
|
||
+ printk(KERN_ERR "copy_to_user failed: %d\n", ret);
|
||
+ break;
|
||
+ case RETU_IOCH_ADC_READ:
|
||
+ return retu_read_adc(arg);
|
||
+ default:
|
||
+ return -ENOIOCTLCMD;
|
||
+ }
|
||
+ return 0;
|
||
+}
|
||
+
|
||
+/*
|
||
+ * Read from device
|
||
+ */
|
||
+static ssize_t retu_read(struct file *filp, char *buf, size_t count,
|
||
+ loff_t * offp)
|
||
+{
|
||
+ struct retu_irq *irq;
|
||
+
|
||
+ u32 nr, i;
|
||
+
|
||
+ /* read not permitted if neither filp nor anyone has registered IRQs */
|
||
+ if (retu_irq_subscr != filp)
|
||
+ return -EPERM;
|
||
+
|
||
+ if ((count < sizeof(u32)) || ((count % sizeof(u32)) != 0))
|
||
+ return -EINVAL;
|
||
+
|
||
+ nr = count / sizeof(u32);
|
||
+
|
||
+ for (i = 0; i < nr; i++) {
|
||
+ unsigned long flags;
|
||
+ u32 irq_id;
|
||
+ int ret;
|
||
+
|
||
+ ret = wait_event_interruptible(retu_user_waitqueue,
|
||
+ !list_empty(&retu_irqs));
|
||
+ if (ret < 0)
|
||
+ return ret;
|
||
+
|
||
+ spin_lock_irqsave(&retu_irqs_lock, flags);
|
||
+ irq = list_entry((&retu_irqs)->next, struct retu_irq, node);
|
||
+ irq_id = irq->id;
|
||
+ list_move(&irq->node, &retu_irqs_reserve);
|
||
+ spin_unlock_irqrestore(&retu_irqs_lock, flags);
|
||
+
|
||
+ ret = copy_to_user(buf + i * sizeof(irq_id), &irq_id,
|
||
+ sizeof(irq_id));
|
||
+ if (ret)
|
||
+ printk(KERN_ERR "copy_to_user failed: %d\n", ret);
|
||
+ }
|
||
+
|
||
+ return count;
|
||
+}
|
||
+
|
||
+/*
|
||
+ * Poll method
|
||
+ */
|
||
+static unsigned retu_poll(struct file *filp, struct poll_table_struct *pt)
|
||
+{
|
||
+ if (!list_empty(&retu_irqs))
|
||
+ return POLLIN;
|
||
+
|
||
+ poll_wait(filp, &retu_user_waitqueue, pt);
|
||
+
|
||
+ if (!list_empty(&retu_irqs))
|
||
+ return POLLIN;
|
||
+ else
|
||
+ return 0;
|
||
+}
|
||
+
|
||
+static struct file_operations retu_user_fileops = {
|
||
+ .owner = THIS_MODULE,
|
||
+ .ioctl = retu_ioctl,
|
||
+ .read = retu_read,
|
||
+ .release = retu_close,
|
||
+ .poll = retu_poll
|
||
+};
|
||
+
|
||
+static struct miscdevice retu_device = {
|
||
+ .minor = MISC_DYNAMIC_MINOR,
|
||
+ .name = "retu",
|
||
+ .fops = &retu_user_fileops
|
||
+};
|
||
+
|
||
+/*
|
||
+ * Initialization
|
||
+ *
|
||
+ * @return 0 if successful, error value otherwise.
|
||
+ */
|
||
+int retu_user_init(void)
|
||
+{
|
||
+ struct retu_irq *irq;
|
||
+ int res, i;
|
||
+
|
||
+ irq = kmalloc(sizeof(*irq) * RETU_MAX_IRQ_BUF_LEN, GFP_KERNEL);
|
||
+ if (irq == NULL) {
|
||
+ printk(KERN_ERR PFX "kmalloc failed\n");
|
||
+ return -ENOMEM;
|
||
+ }
|
||
+ memset(irq, 0, sizeof(*irq) * RETU_MAX_IRQ_BUF_LEN);
|
||
+ for (i = 0; i < RETU_MAX_IRQ_BUF_LEN; i++)
|
||
+ list_add(&irq[i].node, &retu_irqs_reserve);
|
||
+
|
||
+ retu_irq_block = irq;
|
||
+
|
||
+ spin_lock_init(&retu_irqs_lock);
|
||
+ mutex_init(&retu_mutex);
|
||
+
|
||
+ /* Request a misc device */
|
||
+ res = misc_register(&retu_device);
|
||
+ if (res < 0) {
|
||
+ printk(KERN_ERR PFX "unable to register misc device for %s\n",
|
||
+ retu_device.name);
|
||
+ kfree(irq);
|
||
+ return res;
|
||
+ }
|
||
+
|
||
+ return 0;
|
||
+}
|
||
+
|
||
+/*
|
||
+ * Cleanup.
|
||
+ */
|
||
+void retu_user_cleanup(void)
|
||
+{
|
||
+ /* Unregister our misc device */
|
||
+ misc_deregister(&retu_device);
|
||
+ /* Unregister and disable all RETU interrupts used by this module */
|
||
+ retu_unreg_irq_handlers();
|
||
+ kfree(retu_irq_block);
|
||
+}
|
||
+
|
||
+MODULE_DESCRIPTION("Retu ASIC user space functions");
|
||
+MODULE_LICENSE("GPL");
|
||
+MODULE_AUTHOR("Mikko Ylinen");
|
||
diff --git a/drivers/cbus/retu-wdt.c b/drivers/cbus/retu-wdt.c
|
||
new file mode 100644
|
||
index 0000000..b7b20b7
|
||
--- /dev/null
|
||
+++ b/drivers/cbus/retu-wdt.c
|
||
@@ -0,0 +1,202 @@
|
||
+/**
|
||
+ * drivers/cbus/retu-wdt.c
|
||
+ *
|
||
+ * Driver for Retu watchdog
|
||
+ *
|
||
+ * Copyright (C) 2004, 2005 Nokia Corporation
|
||
+ *
|
||
+ * Written by Amit Kucheria <amit.kucheria@nokia.com>
|
||
+ *
|
||
+ * This file is subject to the terms and conditions of the GNU General
|
||
+ * Public License. See the file "COPYING" in the main directory of this
|
||
+ * archive for more details.
|
||
+ *
|
||
+ * This program is distributed in the hope that it will be useful,
|
||
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
+ * GNU General Public License for more details.
|
||
+ *
|
||
+ * You should have received a copy of the GNU General Public License
|
||
+ * along with this program; if not, write to the Free Software
|
||
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||
+ */
|
||
+
|
||
+#include <linux/kernel.h>
|
||
+#include <linux/module.h>
|
||
+#include <linux/device.h>
|
||
+#include <linux/init.h>
|
||
+
|
||
+#include <linux/completion.h>
|
||
+#include <linux/errno.h>
|
||
+#include <linux/moduleparam.h>
|
||
+#include <linux/platform_device.h>
|
||
+
|
||
+#include "cbus.h"
|
||
+#include "retu.h"
|
||
+
|
||
+/* Watchdog timeout in seconds */
|
||
+#define RETU_WDT_MIN_TIMER 0
|
||
+#define RETU_WDT_DEFAULT_TIMER 32
|
||
+#define RETU_WDT_MAX_TIMER 63
|
||
+
|
||
+static struct completion retu_wdt_completion;
|
||
+static DEFINE_MUTEX(retu_wdt_mutex);
|
||
+
|
||
+/* Current period of watchdog */
|
||
+static unsigned int period_val = RETU_WDT_DEFAULT_TIMER;
|
||
+static int counter_param = RETU_WDT_MAX_TIMER;
|
||
+
|
||
+static int retu_modify_counter(unsigned int new)
|
||
+{
|
||
+ int ret = 0;
|
||
+
|
||
+ if (new < RETU_WDT_MIN_TIMER || new > RETU_WDT_MAX_TIMER)
|
||
+ return -EINVAL;
|
||
+
|
||
+ mutex_lock(&retu_wdt_mutex);
|
||
+
|
||
+ period_val = new;
|
||
+ retu_write_reg(RETU_REG_WATCHDOG, (u16)period_val);
|
||
+
|
||
+ mutex_unlock(&retu_wdt_mutex);
|
||
+ return ret;
|
||
+}
|
||
+
|
||
+static ssize_t retu_wdt_period_show(struct device *dev,
|
||
+ struct device_attribute *attr, char *buf)
|
||
+{
|
||
+ /* Show current max counter */
|
||
+ return sprintf(buf, "%u\n", (u16)period_val);
|
||
+}
|
||
+
|
||
+static ssize_t retu_wdt_period_store(struct device *dev,
|
||
+ struct device_attribute *attr,
|
||
+ const char *buf, size_t count)
|
||
+{
|
||
+ unsigned int new_period;
|
||
+ int ret;
|
||
+
|
||
+ if (sscanf(buf, "%u", &new_period) != 1) {
|
||
+ printk(KERN_ALERT "retu_wdt_period_store: Invalid input\n");
|
||
+ return -EINVAL;
|
||
+ }
|
||
+
|
||
+ ret = retu_modify_counter(new_period);
|
||
+ if (ret < 0)
|
||
+ return ret;
|
||
+
|
||
+ return strnlen(buf, count);
|
||
+}
|
||
+
|
||
+static ssize_t retu_wdt_counter_show(struct device *dev,
|
||
+ struct device_attribute *attr, char *buf)
|
||
+{
|
||
+ u16 counter;
|
||
+
|
||
+ /* Show current value in watchdog counter */
|
||
+ counter = retu_read_reg(RETU_REG_WATCHDOG);
|
||
+
|
||
+ /* Only the 5 LSB are important */
|
||
+ return snprintf(buf, PAGE_SIZE, "%u\n", (counter & 0x3F));
|
||
+}
|
||
+
|
||
+static DEVICE_ATTR(period, S_IRUGO | S_IWUSR, retu_wdt_period_show, \
|
||
+ retu_wdt_period_store);
|
||
+static DEVICE_ATTR(counter, S_IRUGO, retu_wdt_counter_show, NULL);
|
||
+
|
||
+static int __devinit retu_wdt_probe(struct device *dev)
|
||
+{
|
||
+ int ret;
|
||
+
|
||
+ ret = device_create_file(dev, &dev_attr_period);
|
||
+ if (ret) {
|
||
+ printk(KERN_ERR "retu_wdt_probe: Error creating "
|
||
+ "sys device file: period\n");
|
||
+ return ret;
|
||
+ }
|
||
+
|
||
+ ret = device_create_file(dev, &dev_attr_counter);
|
||
+ if (ret) {
|
||
+ device_remove_file(dev, &dev_attr_period);
|
||
+ printk(KERN_ERR "retu_wdt_probe: Error creating "
|
||
+ "sys device file: counter\n");
|
||
+ }
|
||
+
|
||
+ return ret;
|
||
+}
|
||
+
|
||
+static int __devexit retu_wdt_remove(struct device *dev)
|
||
+{
|
||
+ device_remove_file(dev, &dev_attr_period);
|
||
+ device_remove_file(dev, &dev_attr_counter);
|
||
+ return 0;
|
||
+}
|
||
+
|
||
+static void retu_wdt_device_release(struct device *dev)
|
||
+{
|
||
+ complete(&retu_wdt_completion);
|
||
+}
|
||
+
|
||
+static struct platform_device retu_wdt_device = {
|
||
+ .name = "retu-watchdog",
|
||
+ .id = -1,
|
||
+ .dev = {
|
||
+ .release = retu_wdt_device_release,
|
||
+ },
|
||
+};
|
||
+
|
||
+static struct device_driver retu_wdt_driver = {
|
||
+ .name = "retu-watchdog",
|
||
+ .bus = &platform_bus_type,
|
||
+ .probe = retu_wdt_probe,
|
||
+ .remove = __devexit_p(retu_wdt_remove),
|
||
+};
|
||
+
|
||
+static int __init retu_wdt_init(void)
|
||
+{
|
||
+ int ret;
|
||
+
|
||
+ init_completion(&retu_wdt_completion);
|
||
+
|
||
+ ret = driver_register(&retu_wdt_driver);
|
||
+ if (ret)
|
||
+ return ret;
|
||
+
|
||
+ ret = platform_device_register(&retu_wdt_device);
|
||
+ if (ret)
|
||
+ goto exit1;
|
||
+
|
||
+ /* passed as module parameter? */
|
||
+ ret = retu_modify_counter(counter_param);
|
||
+ if (ret == -EINVAL) {
|
||
+ ret = retu_modify_counter(RETU_WDT_DEFAULT_TIMER);
|
||
+ printk(KERN_INFO
|
||
+ "retu_wdt_init: Intializing to default value\n");
|
||
+ }
|
||
+
|
||
+ printk(KERN_INFO "Retu watchdog driver initialized\n");
|
||
+ return ret;
|
||
+
|
||
+exit1:
|
||
+ driver_unregister(&retu_wdt_driver);
|
||
+ wait_for_completion(&retu_wdt_completion);
|
||
+
|
||
+ return ret;
|
||
+}
|
||
+
|
||
+static void __exit retu_wdt_exit(void)
|
||
+{
|
||
+ platform_device_unregister(&retu_wdt_device);
|
||
+ driver_unregister(&retu_wdt_driver);
|
||
+
|
||
+ wait_for_completion(&retu_wdt_completion);
|
||
+}
|
||
+
|
||
+module_init(retu_wdt_init);
|
||
+module_exit(retu_wdt_exit);
|
||
+module_param(counter_param, int, 0);
|
||
+
|
||
+MODULE_DESCRIPTION("Retu WatchDog");
|
||
+MODULE_AUTHOR("Amit Kucheria");
|
||
+MODULE_LICENSE("GPL");
|
||
+
|
||
diff --git a/drivers/cbus/retu.c b/drivers/cbus/retu.c
|
||
new file mode 100644
|
||
index 0000000..84d7840
|
||
--- /dev/null
|
||
+++ b/drivers/cbus/retu.c
|
||
@@ -0,0 +1,467 @@
|
||
+/**
|
||
+ * drivers/cbus/retu.c
|
||
+ *
|
||
+ * Support functions for Retu ASIC
|
||
+ *
|
||
+ * Copyright (C) 2004, 2005 Nokia Corporation
|
||
+ *
|
||
+ * Written by Juha Yrj<72>l<EFBFBD> <juha.yrjola@nokia.com>,
|
||
+ * David Weinehall <david.weinehall@nokia.com>, and
|
||
+ * Mikko Ylinen <mikko.k.ylinen@nokia.com>
|
||
+ *
|
||
+ * This file is subject to the terms and conditions of the GNU General
|
||
+ * Public License. See the file "COPYING" in the main directory of this
|
||
+ * archive for more details.
|
||
+ *
|
||
+ * This program is distributed in the hope that it will be useful,
|
||
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
+ * GNU General Public License for more details.
|
||
+ *
|
||
+ * You should have received a copy of the GNU General Public License
|
||
+ * along with this program; if not, write to the Free Software
|
||
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||
+ */
|
||
+
|
||
+#include <linux/module.h>
|
||
+#include <linux/init.h>
|
||
+
|
||
+#include <linux/kernel.h>
|
||
+#include <linux/errno.h>
|
||
+#include <linux/device.h>
|
||
+#include <linux/miscdevice.h>
|
||
+#include <linux/poll.h>
|
||
+#include <linux/fs.h>
|
||
+#include <linux/irq.h>
|
||
+#include <linux/interrupt.h>
|
||
+#include <linux/platform_device.h>
|
||
+#include <linux/gpio.h>
|
||
+
|
||
+#include <asm/uaccess.h>
|
||
+
|
||
+#include <mach/mux.h>
|
||
+#include <mach/board.h>
|
||
+#include <mach/board-nokia.h>
|
||
+
|
||
+#include "cbus.h"
|
||
+#include "retu.h"
|
||
+
|
||
+#define RETU_ID 0x01
|
||
+#define PFX "retu: "
|
||
+
|
||
+static int retu_initialized;
|
||
+static int retu_irq_pin;
|
||
+static int retu_is_vilma;
|
||
+
|
||
+static struct tasklet_struct retu_tasklet;
|
||
+spinlock_t retu_lock = SPIN_LOCK_UNLOCKED;
|
||
+
|
||
+static struct completion device_release;
|
||
+
|
||
+struct retu_irq_handler_desc {
|
||
+ int (*func)(unsigned long);
|
||
+ unsigned long arg;
|
||
+ char name[8];
|
||
+};
|
||
+
|
||
+static struct retu_irq_handler_desc retu_irq_handlers[MAX_RETU_IRQ_HANDLERS];
|
||
+
|
||
+/**
|
||
+ * retu_read_reg - Read a value from a register in Retu
|
||
+ * @reg: the register to read from
|
||
+ *
|
||
+ * This function returns the contents of the specified register
|
||
+ */
|
||
+int retu_read_reg(int reg)
|
||
+{
|
||
+ BUG_ON(!retu_initialized);
|
||
+ return cbus_read_reg(cbus_host, RETU_ID, reg);
|
||
+}
|
||
+
|
||
+/**
|
||
+ * retu_write_reg - Write a value to a register in Retu
|
||
+ * @reg: the register to write to
|
||
+ * @reg: the value to write to the register
|
||
+ *
|
||
+ * This function writes a value to the specified register
|
||
+ */
|
||
+void retu_write_reg(int reg, u16 val)
|
||
+{
|
||
+ BUG_ON(!retu_initialized);
|
||
+ cbus_write_reg(cbus_host, RETU_ID, reg, val);
|
||
+}
|
||
+
|
||
+void retu_set_clear_reg_bits(int reg, u16 set, u16 clear)
|
||
+{
|
||
+ unsigned long flags;
|
||
+ u16 w;
|
||
+
|
||
+ spin_lock_irqsave(&retu_lock, flags);
|
||
+ w = retu_read_reg(reg);
|
||
+ w &= ~clear;
|
||
+ w |= set;
|
||
+ retu_write_reg(reg, w);
|
||
+ spin_unlock_irqrestore(&retu_lock, flags);
|
||
+}
|
||
+
|
||
+#define ADC_MAX_CHAN_NUMBER 13
|
||
+
|
||
+int retu_read_adc(int channel)
|
||
+{
|
||
+ unsigned long flags;
|
||
+ int res;
|
||
+
|
||
+ if (channel < 0 || channel > ADC_MAX_CHAN_NUMBER)
|
||
+ return -EINVAL;
|
||
+
|
||
+ spin_lock_irqsave(&retu_lock, flags);
|
||
+
|
||
+ if ((channel == 8) && retu_is_vilma) {
|
||
+ int scr = retu_read_reg(RETU_REG_ADCSCR);
|
||
+ int ch = (retu_read_reg(RETU_REG_ADCR) >> 10) & 0xf;
|
||
+ if (((scr & 0xff) != 0) && (ch != 8))
|
||
+ retu_write_reg (RETU_REG_ADCSCR, (scr & ~0xff));
|
||
+ }
|
||
+
|
||
+ /* Select the channel and read result */
|
||
+ retu_write_reg(RETU_REG_ADCR, channel << 10);
|
||
+ res = retu_read_reg(RETU_REG_ADCR) & 0x3ff;
|
||
+
|
||
+ if (retu_is_vilma)
|
||
+ retu_write_reg(RETU_REG_ADCR, (1 << 13));
|
||
+
|
||
+ /* Unlock retu */
|
||
+ spin_unlock_irqrestore(&retu_lock, flags);
|
||
+
|
||
+ return res;
|
||
+}
|
||
+
|
||
+
|
||
+static u16 retu_disable_bogus_irqs(u16 mask)
|
||
+{
|
||
+ int i;
|
||
+
|
||
+ for (i = 0; i < MAX_RETU_IRQ_HANDLERS; i++) {
|
||
+ if (mask & (1 << i))
|
||
+ continue;
|
||
+ if (retu_irq_handlers[i].func != NULL)
|
||
+ continue;
|
||
+ /* an IRQ was enabled but we don't have a handler for it */
|
||
+ printk(KERN_INFO PFX "disabling bogus IRQ %d\n", i);
|
||
+ mask |= (1 << i);
|
||
+ }
|
||
+ return mask;
|
||
+}
|
||
+
|
||
+/*
|
||
+ * Disable given RETU interrupt
|
||
+ */
|
||
+void retu_disable_irq(int id)
|
||
+{
|
||
+ unsigned long flags;
|
||
+ u16 mask;
|
||
+
|
||
+ spin_lock_irqsave(&retu_lock, flags);
|
||
+ mask = retu_read_reg(RETU_REG_IMR);
|
||
+ mask |= 1 << id;
|
||
+ mask = retu_disable_bogus_irqs(mask);
|
||
+ retu_write_reg(RETU_REG_IMR, mask);
|
||
+ spin_unlock_irqrestore(&retu_lock, flags);
|
||
+}
|
||
+
|
||
+/*
|
||
+ * Enable given RETU interrupt
|
||
+ */
|
||
+void retu_enable_irq(int id)
|
||
+{
|
||
+ unsigned long flags;
|
||
+ u16 mask;
|
||
+
|
||
+ if (id == 3) {
|
||
+ printk("Enabling Retu IRQ %d\n", id);
|
||
+ dump_stack();
|
||
+ }
|
||
+ spin_lock_irqsave(&retu_lock, flags);
|
||
+ mask = retu_read_reg(RETU_REG_IMR);
|
||
+ mask &= ~(1 << id);
|
||
+ mask = retu_disable_bogus_irqs(mask);
|
||
+ retu_write_reg(RETU_REG_IMR, mask);
|
||
+ spin_unlock_irqrestore(&retu_lock, flags);
|
||
+}
|
||
+
|
||
+/*
|
||
+ * Acknowledge given RETU interrupt
|
||
+ */
|
||
+void retu_ack_irq(int id)
|
||
+{
|
||
+ retu_write_reg(RETU_REG_IDR, 1 << id);
|
||
+}
|
||
+
|
||
+/*
|
||
+ * RETU interrupt handler. Only schedules the tasklet.
|
||
+ */
|
||
+static irqreturn_t retu_irq_handler(int irq, void *dev_id)
|
||
+{
|
||
+ tasklet_schedule(&retu_tasklet);
|
||
+ return IRQ_HANDLED;
|
||
+}
|
||
+
|
||
+/*
|
||
+ * Tasklet handler
|
||
+ */
|
||
+static void retu_tasklet_handler(unsigned long data)
|
||
+{
|
||
+ struct retu_irq_handler_desc *hnd;
|
||
+ u16 id;
|
||
+ u16 im;
|
||
+ int i;
|
||
+
|
||
+ for (;;) {
|
||
+ id = retu_read_reg(RETU_REG_IDR);
|
||
+ im = ~retu_read_reg(RETU_REG_IMR);
|
||
+ id &= im;
|
||
+
|
||
+ if (!id)
|
||
+ break;
|
||
+
|
||
+ for (i = 0; id != 0; i++, id >>= 1) {
|
||
+ if (!(id & 1))
|
||
+ continue;
|
||
+ hnd = &retu_irq_handlers[i];
|
||
+ if (hnd->func == NULL) {
|
||
+ /* Spurious retu interrupt - disable and ack it */
|
||
+ printk(KERN_INFO "Spurious Retu interrupt "
|
||
+ "(id %d)\n", i);
|
||
+ retu_disable_irq(i);
|
||
+ retu_ack_irq(i);
|
||
+ continue;
|
||
+ }
|
||
+ hnd->func(hnd->arg);
|
||
+ /*
|
||
+ * Don't acknowledge the interrupt here
|
||
+ * It must be done explicitly
|
||
+ */
|
||
+ }
|
||
+ }
|
||
+}
|
||
+
|
||
+/*
|
||
+ * Register the handler for a given RETU interrupt source.
|
||
+ */
|
||
+int retu_request_irq(int id, void *irq_handler, unsigned long arg, char *name)
|
||
+{
|
||
+ struct retu_irq_handler_desc *hnd;
|
||
+
|
||
+ if (irq_handler == NULL || id >= MAX_RETU_IRQ_HANDLERS ||
|
||
+ name == NULL) {
|
||
+ printk(KERN_ERR PFX "Invalid arguments to %s\n",
|
||
+ __FUNCTION__);
|
||
+ return -EINVAL;
|
||
+ }
|
||
+ hnd = &retu_irq_handlers[id];
|
||
+ if (hnd->func != NULL) {
|
||
+ printk(KERN_ERR PFX "IRQ %d already reserved\n", id);
|
||
+ return -EBUSY;
|
||
+ }
|
||
+ printk(KERN_INFO PFX "Registering interrupt %d for device %s\n",
|
||
+ id, name);
|
||
+ hnd->func = irq_handler;
|
||
+ hnd->arg = arg;
|
||
+ strlcpy(hnd->name, name, sizeof(hnd->name));
|
||
+
|
||
+ retu_ack_irq(id);
|
||
+ retu_enable_irq(id);
|
||
+
|
||
+ return 0;
|
||
+}
|
||
+
|
||
+/*
|
||
+ * Unregister the handler for a given RETU interrupt source.
|
||
+ */
|
||
+void retu_free_irq(int id)
|
||
+{
|
||
+ struct retu_irq_handler_desc *hnd;
|
||
+
|
||
+ if (id >= MAX_RETU_IRQ_HANDLERS) {
|
||
+ printk(KERN_ERR PFX "Invalid argument to %s\n",
|
||
+ __FUNCTION__);
|
||
+ return;
|
||
+ }
|
||
+ hnd = &retu_irq_handlers[id];
|
||
+ if (hnd->func == NULL) {
|
||
+ printk(KERN_ERR PFX "IRQ %d already freed\n", id);
|
||
+ return;
|
||
+ }
|
||
+
|
||
+ retu_disable_irq(id);
|
||
+ hnd->func = NULL;
|
||
+}
|
||
+
|
||
+/**
|
||
+ * retu_power_off - Shut down power to system
|
||
+ *
|
||
+ * This function puts the system in power off state
|
||
+ */
|
||
+static void retu_power_off(void)
|
||
+{
|
||
+ /* Ignore power button state */
|
||
+ retu_write_reg(RETU_REG_CC1, retu_read_reg(RETU_REG_CC1) | 2);
|
||
+ /* Expire watchdog immediately */
|
||
+ retu_write_reg(RETU_REG_WATCHDOG, 0);
|
||
+ /* Wait for poweroff*/
|
||
+ for (;;);
|
||
+}
|
||
+
|
||
+/**
|
||
+ * retu_probe - Probe for Retu ASIC
|
||
+ * @dev: the Retu device
|
||
+ *
|
||
+ * Probe for the Retu ASIC and allocate memory
|
||
+ * for its device-struct if found
|
||
+ */
|
||
+static int __devinit retu_probe(struct device *dev)
|
||
+{
|
||
+ const struct omap_em_asic_bb5_config * em_asic_config;
|
||
+ int rev, ret;
|
||
+
|
||
+ /* Prepare tasklet */
|
||
+ tasklet_init(&retu_tasklet, retu_tasklet_handler, 0);
|
||
+
|
||
+ em_asic_config = omap_get_config(OMAP_TAG_EM_ASIC_BB5,
|
||
+ struct omap_em_asic_bb5_config);
|
||
+ if (em_asic_config == NULL) {
|
||
+ printk(KERN_ERR PFX "Unable to retrieve config data\n");
|
||
+ return -ENODATA;
|
||
+ }
|
||
+
|
||
+ retu_irq_pin = em_asic_config->retu_irq_gpio;
|
||
+
|
||
+ if ((ret = gpio_request(retu_irq_pin, "RETU irq")) < 0) {
|
||
+ printk(KERN_ERR PFX "Unable to reserve IRQ GPIO\n");
|
||
+ return ret;
|
||
+ }
|
||
+
|
||
+ /* Set the pin as input */
|
||
+ gpio_direction_input(retu_irq_pin);
|
||
+
|
||
+ /* Rising edge triggers the IRQ */
|
||
+ set_irq_type(gpio_to_irq(retu_irq_pin), IRQ_TYPE_EDGE_RISING);
|
||
+
|
||
+ retu_initialized = 1;
|
||
+
|
||
+ rev = retu_read_reg(RETU_REG_ASICR) & 0xff;
|
||
+ if (rev & (1 << 7))
|
||
+ retu_is_vilma = 1;
|
||
+
|
||
+ printk(KERN_INFO "%s v%d.%d found\n", retu_is_vilma ? "Vilma" : "Retu",
|
||
+ (rev >> 4) & 0x07, rev & 0x0f);
|
||
+
|
||
+ /* Mask all RETU interrupts */
|
||
+ retu_write_reg(RETU_REG_IMR, 0xffff);
|
||
+
|
||
+ ret = request_irq(gpio_to_irq(retu_irq_pin), retu_irq_handler, 0,
|
||
+ "retu", 0);
|
||
+ if (ret < 0) {
|
||
+ printk(KERN_ERR PFX "Unable to register IRQ handler\n");
|
||
+ gpio_free(retu_irq_pin);
|
||
+ return ret;
|
||
+ }
|
||
+ set_irq_wake(gpio_to_irq(retu_irq_pin), 1);
|
||
+
|
||
+ /* Register power off function */
|
||
+ pm_power_off = retu_power_off;
|
||
+
|
||
+#ifdef CONFIG_CBUS_RETU_USER
|
||
+ /* Initialize user-space interface */
|
||
+ if (retu_user_init() < 0) {
|
||
+ printk(KERN_ERR "Unable to initialize driver\n");
|
||
+ free_irq(gpio_to_irq(retu_irq_pin), 0);
|
||
+ gpio_free(retu_irq_pin);
|
||
+ return ret;
|
||
+ }
|
||
+#endif
|
||
+
|
||
+ return 0;
|
||
+}
|
||
+
|
||
+static int retu_remove(struct device *dev)
|
||
+{
|
||
+#ifdef CONFIG_CBUS_RETU_USER
|
||
+ retu_user_cleanup();
|
||
+#endif
|
||
+ /* Mask all RETU interrupts */
|
||
+ retu_write_reg(RETU_REG_IMR, 0xffff);
|
||
+ free_irq(gpio_to_irq(retu_irq_pin), 0);
|
||
+ gpio_free(retu_irq_pin);
|
||
+ tasklet_kill(&retu_tasklet);
|
||
+
|
||
+ return 0;
|
||
+}
|
||
+
|
||
+static void retu_device_release(struct device *dev)
|
||
+{
|
||
+ complete(&device_release);
|
||
+}
|
||
+
|
||
+static struct device_driver retu_driver = {
|
||
+ .name = "retu",
|
||
+ .bus = &platform_bus_type,
|
||
+ .probe = retu_probe,
|
||
+ .remove = retu_remove,
|
||
+};
|
||
+
|
||
+static struct platform_device retu_device = {
|
||
+ .name = "retu",
|
||
+ .id = -1,
|
||
+ .dev = {
|
||
+ .release = retu_device_release,
|
||
+ }
|
||
+};
|
||
+
|
||
+/**
|
||
+ * retu_init - initialise Retu driver
|
||
+ *
|
||
+ * Initialise the Retu driver and return 0 if everything worked ok
|
||
+ */
|
||
+static int __init retu_init(void)
|
||
+{
|
||
+ int ret = 0;
|
||
+
|
||
+ printk(KERN_INFO "Retu/Vilma driver initialising\n");
|
||
+
|
||
+ init_completion(&device_release);
|
||
+
|
||
+ if ((ret = driver_register(&retu_driver)) < 0)
|
||
+ return ret;
|
||
+
|
||
+ if ((ret = platform_device_register(&retu_device)) < 0) {
|
||
+ driver_unregister(&retu_driver);
|
||
+ return ret;
|
||
+ }
|
||
+ return 0;
|
||
+}
|
||
+
|
||
+/*
|
||
+ * Cleanup
|
||
+ */
|
||
+static void __exit retu_exit(void)
|
||
+{
|
||
+ platform_device_unregister(&retu_device);
|
||
+ driver_unregister(&retu_driver);
|
||
+ wait_for_completion(&device_release);
|
||
+}
|
||
+
|
||
+EXPORT_SYMBOL(retu_request_irq);
|
||
+EXPORT_SYMBOL(retu_free_irq);
|
||
+EXPORT_SYMBOL(retu_enable_irq);
|
||
+EXPORT_SYMBOL(retu_disable_irq);
|
||
+EXPORT_SYMBOL(retu_ack_irq);
|
||
+EXPORT_SYMBOL(retu_read_reg);
|
||
+EXPORT_SYMBOL(retu_write_reg);
|
||
+
|
||
+subsys_initcall(retu_init);
|
||
+module_exit(retu_exit);
|
||
+
|
||
+MODULE_DESCRIPTION("Retu ASIC control");
|
||
+MODULE_LICENSE("GPL");
|
||
+MODULE_AUTHOR("Juha Yrj<72>l<EFBFBD>, David Weinehall, and Mikko Ylinen");
|
||
diff --git a/drivers/cbus/retu.h b/drivers/cbus/retu.h
|
||
new file mode 100644
|
||
index 0000000..c9e044c
|
||
--- /dev/null
|
||
+++ b/drivers/cbus/retu.h
|
||
@@ -0,0 +1,77 @@
|
||
+/**
|
||
+ * drivers/cbus/retu.h
|
||
+ *
|
||
+ * Copyright (C) 2004, 2005 Nokia Corporation
|
||
+ *
|
||
+ * Written by Juha Yrj<72>l<EFBFBD> <juha.yrjola@nokia.com> and
|
||
+ * David Weinehall <david.weinehall@nokia.com>
|
||
+ *
|
||
+ * This file is subject to the terms and conditions of the GNU General
|
||
+ * Public License. See the file "COPYING" in the main directory of this
|
||
+ * archive for more details.
|
||
+ *
|
||
+ * This program is distributed in the hope that it will be useful,
|
||
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
+ * GNU General Public License for more details.
|
||
+
|
||
+ * You should have received a copy of the GNU General Public License
|
||
+ * along with this program; if not, write to the Free Software
|
||
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||
+ */
|
||
+
|
||
+#ifndef __DRIVERS_CBUS_RETU_H
|
||
+#define __DRIVERS_CBUS_RETU_H
|
||
+
|
||
+#include <linux/types.h>
|
||
+
|
||
+/* Registers */
|
||
+#define RETU_REG_ASICR 0x00 /* ASIC ID & revision */
|
||
+#define RETU_REG_IDR 0x01 /* Interrupt ID */
|
||
+#define RETU_REG_IMR 0x02 /* Interrupt mask */
|
||
+#define RETU_REG_RTCDSR 0x03 /* RTC seconds register */
|
||
+#define RETU_REG_RTCHMR 0x04 /* RTC hours and minutes register */
|
||
+#define RETU_REG_RTCHMAR 0x05 /* RTC hours and minutes alarm and time set register */
|
||
+#define RETU_REG_RTCCALR 0x06 /* RTC calibration register */
|
||
+#define RETU_REG_ADCR 0x08 /* ADC result */
|
||
+#define RETU_REG_ADCSCR 0x09 /* ADC sample ctrl */
|
||
+#define RETU_REG_CC1 0x0d /* Common control register 1 */
|
||
+#define RETU_REG_CC2 0x0e /* Common control register 2 */
|
||
+#define RETU_REG_CTRL_CLR 0x0f /* Regulator clear register */
|
||
+#define RETU_REG_CTRL_SET 0x10 /* Regulator set register */
|
||
+#define RETU_REG_STATUS 0x16 /* Status register */
|
||
+#define RETU_REG_WATCHDOG 0x17 /* Watchdog register */
|
||
+#define RETU_REG_AUDTXR 0x18 /* Audio Codec Tx register */
|
||
+#define RETU_REG_MAX 0x1f
|
||
+
|
||
+/* Interrupt sources */
|
||
+#define RETU_INT_PWR 0
|
||
+#define RETU_INT_CHAR 1
|
||
+#define RETU_INT_RTCS 2
|
||
+#define RETU_INT_RTCM 3
|
||
+#define RETU_INT_RTCD 4
|
||
+#define RETU_INT_RTCA 5
|
||
+#define RETU_INT_HOOK 6
|
||
+#define RETU_INT_HEAD 7
|
||
+#define RETU_INT_ADCS 8
|
||
+
|
||
+#define MAX_RETU_IRQ_HANDLERS 16
|
||
+
|
||
+int retu_read_reg(int reg);
|
||
+void retu_write_reg(int reg, u16 val);
|
||
+void retu_set_clear_reg_bits(int reg, u16 set, u16 clear);
|
||
+int retu_read_adc(int channel);
|
||
+int retu_request_irq(int id, void *irq_handler, unsigned long arg, char *name);
|
||
+void retu_free_irq(int id);
|
||
+void retu_enable_irq(int id);
|
||
+void retu_disable_irq(int id);
|
||
+void retu_ack_irq(int id);
|
||
+
|
||
+#ifdef CONFIG_CBUS_RETU_USER
|
||
+int retu_user_init(void);
|
||
+void retu_user_cleanup(void);
|
||
+#endif
|
||
+
|
||
+extern spinlock_t retu_lock;
|
||
+
|
||
+#endif /* __DRIVERS_CBUS_RETU_H */
|
||
diff --git a/drivers/cbus/tahvo-usb.c b/drivers/cbus/tahvo-usb.c
|
||
new file mode 100644
|
||
index 0000000..d8ad836
|
||
--- /dev/null
|
||
+++ b/drivers/cbus/tahvo-usb.c
|
||
@@ -0,0 +1,777 @@
|
||
+/**
|
||
+ * drivers/cbus/tahvo-usb.c
|
||
+ *
|
||
+ * Tahvo USB transeiver
|
||
+ *
|
||
+ * Copyright (C) 2005-2006 Nokia Corporation
|
||
+ *
|
||
+ * Parts copied from drivers/i2c/chips/isp1301_omap.c
|
||
+ * Copyright (C) 2004 Texas Instruments
|
||
+ * Copyright (C) 2004 David Brownell
|
||
+ *
|
||
+ * Written by Juha Yrj<72>l<EFBFBD> <juha.yrjola@nokia.com>,
|
||
+ * Tony Lindgren <tony@atomide.com>, and
|
||
+ * Timo Ter<65>s <timo.teras@nokia.com>
|
||
+ *
|
||
+ * This file is subject to the terms and conditions of the GNU General
|
||
+ * Public License. See the file "COPYING" in the main directory of this
|
||
+ * archive for more details.
|
||
+ *
|
||
+ * This program is distributed in the hope that it will be useful,
|
||
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
+ * GNU General Public License for more details.
|
||
+ *
|
||
+ * You should have received a copy of the GNU General Public License
|
||
+ * along with this program; if not, write to the Free Software
|
||
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||
+ */
|
||
+
|
||
+#include <linux/kernel.h>
|
||
+#include <linux/module.h>
|
||
+#include <linux/init.h>
|
||
+#include <linux/slab.h>
|
||
+#include <linux/io.h>
|
||
+#include <linux/interrupt.h>
|
||
+#include <linux/platform_device.h>
|
||
+#include <linux/usb/ch9.h>
|
||
+#include <linux/usb/gadget.h>
|
||
+#include <linux/usb.h>
|
||
+#include <linux/usb/otg.h>
|
||
+#include <linux/i2c.h>
|
||
+#include <linux/workqueue.h>
|
||
+#include <linux/kobject.h>
|
||
+#include <linux/clk.h>
|
||
+#include <linux/mutex.h>
|
||
+
|
||
+#include <asm/irq.h>
|
||
+#include <mach/usb.h>
|
||
+
|
||
+#include "cbus.h"
|
||
+#include "tahvo.h"
|
||
+
|
||
+#define DRIVER_NAME "tahvo-usb"
|
||
+
|
||
+#define USBR_SLAVE_CONTROL (1 << 8)
|
||
+#define USBR_VPPVIO_SW (1 << 7)
|
||
+#define USBR_SPEED (1 << 6)
|
||
+#define USBR_REGOUT (1 << 5)
|
||
+#define USBR_MASTER_SW2 (1 << 4)
|
||
+#define USBR_MASTER_SW1 (1 << 3)
|
||
+#define USBR_SLAVE_SW (1 << 2)
|
||
+#define USBR_NSUSPEND (1 << 1)
|
||
+#define USBR_SEMODE (1 << 0)
|
||
+
|
||
+/* bits in OTG_CTRL */
|
||
+
|
||
+/* Bits that are controlled by OMAP OTG and are read-only */
|
||
+#define OTG_CTRL_OMAP_MASK (OTG_PULLDOWN|OTG_PULLUP|OTG_DRV_VBUS|\
|
||
+ OTG_PD_VBUS|OTG_PU_VBUS|OTG_PU_ID)
|
||
+/* Bits that are controlled by transceiver */
|
||
+#define OTG_CTRL_XCVR_MASK (OTG_ASESSVLD|OTG_BSESSEND|\
|
||
+ OTG_BSESSVLD|OTG_VBUSVLD|OTG_ID)
|
||
+/* Bits that are controlled by system */
|
||
+#define OTG_CTRL_SYS_MASK (OTG_A_BUSREQ|OTG_A_SETB_HNPEN|OTG_B_BUSREQ|\
|
||
+ OTG_B_HNPEN|OTG_BUSDROP)
|
||
+
|
||
+#if defined(CONFIG_USB_OHCI_HCD) && !defined(CONFIG_USB_OTG)
|
||
+#error tahvo-otg.c does not work with OCHI yet!
|
||
+#endif
|
||
+
|
||
+#define TAHVO_MODE_HOST 0
|
||
+#define TAHVO_MODE_PERIPHERAL 1
|
||
+
|
||
+#ifdef CONFIG_USB_OTG
|
||
+#define TAHVO_MODE(tu) (tu)->tahvo_mode
|
||
+#elif defined(CONFIG_USB_GADGET_OMAP)
|
||
+#define TAHVO_MODE(tu) TAHVO_MODE_PERIPHERAL
|
||
+#else
|
||
+#define TAHVO_MODE(tu) TAHVO_MODE_HOST
|
||
+#endif
|
||
+
|
||
+struct tahvo_usb {
|
||
+ struct platform_device *pt_dev;
|
||
+ struct otg_transceiver otg;
|
||
+ int vbus_state;
|
||
+ struct work_struct irq_work;
|
||
+ struct mutex serialize;
|
||
+#ifdef CONFIG_USB_OTG
|
||
+ int tahvo_mode;
|
||
+#endif
|
||
+};
|
||
+static struct platform_device tahvo_usb_device;
|
||
+
|
||
+/*
|
||
+ * ---------------------------------------------------------------------------
|
||
+ * OTG related functions
|
||
+ *
|
||
+ * These shoud be separated into omap-otg.c driver module, as they are used
|
||
+ * by various transceivers. These functions are needed in the UDC-only case
|
||
+ * as well. These functions are copied from GPL isp1301_omap.c
|
||
+ * ---------------------------------------------------------------------------
|
||
+ */
|
||
+static struct platform_device *tahvo_otg_dev;
|
||
+
|
||
+static irqreturn_t omap_otg_irq(int irq, void *arg)
|
||
+{
|
||
+ struct platform_device *otg_dev = (struct platform_device *) arg;
|
||
+ struct tahvo_usb *tu = (struct tahvo_usb *) otg_dev->dev.driver_data;
|
||
+ u16 otg_irq;
|
||
+
|
||
+ otg_irq = omap_readw(OTG_IRQ_SRC);
|
||
+ if (otg_irq & OPRT_CHG) {
|
||
+ omap_writew(OPRT_CHG, OTG_IRQ_SRC);
|
||
+ } else if (otg_irq & B_SRP_TMROUT) {
|
||
+ omap_writew(B_SRP_TMROUT, OTG_IRQ_SRC);
|
||
+ } else if (otg_irq & B_HNP_FAIL) {
|
||
+ omap_writew(B_HNP_FAIL, OTG_IRQ_SRC);
|
||
+ } else if (otg_irq & A_SRP_DETECT) {
|
||
+ omap_writew(A_SRP_DETECT, OTG_IRQ_SRC);
|
||
+ } else if (otg_irq & A_REQ_TMROUT) {
|
||
+ omap_writew(A_REQ_TMROUT, OTG_IRQ_SRC);
|
||
+ } else if (otg_irq & A_VBUS_ERR) {
|
||
+ omap_writew(A_VBUS_ERR, OTG_IRQ_SRC);
|
||
+ } else if (otg_irq & DRIVER_SWITCH) {
|
||
+ if ((!(omap_readl(OTG_CTRL) & OTG_DRIVER_SEL)) &&
|
||
+ tu->otg.host && tu->otg.state == OTG_STATE_A_HOST) {
|
||
+ /* role is host */
|
||
+ usb_bus_start_enum(tu->otg.host,
|
||
+ tu->otg.host->otg_port);
|
||
+ }
|
||
+ omap_writew(DRIVER_SWITCH, OTG_IRQ_SRC);
|
||
+ } else
|
||
+ return IRQ_NONE;
|
||
+
|
||
+ return IRQ_HANDLED;
|
||
+
|
||
+}
|
||
+
|
||
+static int omap_otg_init(void)
|
||
+{
|
||
+ u32 l;
|
||
+
|
||
+#ifdef CONFIG_USB_OTG
|
||
+ if (!tahvo_otg_dev) {
|
||
+ printk("tahvo-usb: no tahvo_otg_dev\n");
|
||
+ return -ENODEV;
|
||
+ }
|
||
+#endif
|
||
+
|
||
+ l = omap_readl(OTG_SYSCON_1);
|
||
+ l &= ~OTG_IDLE_EN;
|
||
+ omap_writel(l, OTG_SYSCON_1);
|
||
+ udelay(100);
|
||
+
|
||
+ /* some of these values are board-specific... */
|
||
+ l = omap_readl(OTG_SYSCON_2);
|
||
+ l |= OTG_EN
|
||
+ /* for B-device: */
|
||
+ | SRP_GPDATA /* 9msec Bdev D+ pulse */
|
||
+ | SRP_GPDVBUS /* discharge after VBUS pulse */
|
||
+ // | (3 << 24) /* 2msec VBUS pulse */
|
||
+ /* for A-device: */
|
||
+ | (0 << 20) /* 200ms nominal A_WAIT_VRISE timer */
|
||
+ | SRP_DPW /* detect 167+ns SRP pulses */
|
||
+ | SRP_DATA | SRP_VBUS; /* accept both kinds of SRP pulse */
|
||
+ omap_writel(l, OTG_SYSCON_2);
|
||
+
|
||
+ omap_writew(DRIVER_SWITCH | OPRT_CHG
|
||
+ | B_SRP_TMROUT | B_HNP_FAIL
|
||
+ | A_VBUS_ERR | A_SRP_DETECT | A_REQ_TMROUT,
|
||
+ OTG_IRQ_EN);
|
||
+ l = omap_readl(OTG_SYSCON_2);
|
||
+ l |= OTG_EN;
|
||
+ omap_writel(l, OTG_SYSCON_2);
|
||
+
|
||
+ return 0;
|
||
+}
|
||
+
|
||
+static int omap_otg_probe(struct device *dev)
|
||
+{
|
||
+ int ret;
|
||
+
|
||
+ tahvo_otg_dev = to_platform_device(dev);
|
||
+ ret = omap_otg_init();
|
||
+ if (ret != 0) {
|
||
+ printk(KERN_ERR "tahvo-usb: omap_otg_init failed\n");
|
||
+ return ret;
|
||
+ }
|
||
+
|
||
+ return request_irq(tahvo_otg_dev->resource[1].start,
|
||
+ omap_otg_irq, IRQF_DISABLED, DRIVER_NAME,
|
||
+ &tahvo_usb_device);
|
||
+}
|
||
+
|
||
+static int omap_otg_remove(struct device *dev)
|
||
+{
|
||
+ free_irq(tahvo_otg_dev->resource[1].start, &tahvo_usb_device);
|
||
+ tahvo_otg_dev = NULL;
|
||
+
|
||
+ return 0;
|
||
+}
|
||
+
|
||
+struct device_driver omap_otg_driver = {
|
||
+ .name = "omap_otg",
|
||
+ .bus = &platform_bus_type,
|
||
+ .probe = omap_otg_probe,
|
||
+ .remove = omap_otg_remove,
|
||
+};
|
||
+
|
||
+/*
|
||
+ * ---------------------------------------------------------------------------
|
||
+ * Tahvo related functions
|
||
+ * These are Nokia proprietary code, except for the OTG register settings,
|
||
+ * which are copied from isp1301.c
|
||
+ * ---------------------------------------------------------------------------
|
||
+ */
|
||
+static ssize_t vbus_state_show(struct device *device,
|
||
+ struct device_attribute *attr, char *buf)
|
||
+{
|
||
+ struct tahvo_usb *tu = (struct tahvo_usb*) device->driver_data;
|
||
+ return sprintf(buf, "%d\n", tu->vbus_state);
|
||
+}
|
||
+static DEVICE_ATTR(vbus_state, 0444, vbus_state_show, NULL);
|
||
+
|
||
+int vbus_active = 0;
|
||
+
|
||
+#if 0
|
||
+
|
||
+static int host_suspend(struct tahvo_usb *tu)
|
||
+{
|
||
+ struct device *dev;
|
||
+
|
||
+ if (!tu->otg.host)
|
||
+ return -ENODEV;
|
||
+
|
||
+ /* Currently ASSUMES only the OTG port matters;
|
||
+ * other ports could be active...
|
||
+ */
|
||
+ dev = tu->otg.host->controller;
|
||
+ return dev->driver->suspend(dev, PMSG_SUSPEND);
|
||
+}
|
||
+
|
||
+static int host_resume(struct tahvo_usb *tu)
|
||
+{
|
||
+ struct device *dev;
|
||
+
|
||
+ if (!tu->otg.host)
|
||
+ return -ENODEV;
|
||
+
|
||
+ dev = tu->otg.host->controller;
|
||
+ return dev->driver->resume(dev);
|
||
+}
|
||
+
|
||
+#else
|
||
+
|
||
+static int host_suspend(struct tahvo_usb *tu)
|
||
+{
|
||
+ return 0;
|
||
+}
|
||
+
|
||
+static int host_resume(struct tahvo_usb *tu)
|
||
+{
|
||
+ return 0;
|
||
+}
|
||
+
|
||
+#endif
|
||
+
|
||
+static void check_vbus_state(struct tahvo_usb *tu)
|
||
+{
|
||
+ int reg, prev_state;
|
||
+
|
||
+ reg = tahvo_read_reg(TAHVO_REG_IDSR);
|
||
+ if (reg & 0x01) {
|
||
+ u32 l;
|
||
+
|
||
+ vbus_active = 1;
|
||
+ switch (tu->otg.state) {
|
||
+ case OTG_STATE_B_IDLE:
|
||
+ /* Enable the gadget driver */
|
||
+ if (tu->otg.gadget)
|
||
+ usb_gadget_vbus_connect(tu->otg.gadget);
|
||
+ /* Set B-session valid and not B-sessio ended to indicate
|
||
+ * Vbus to be ok. */
|
||
+ l = omap_readl(OTG_CTRL);
|
||
+ l &= ~OTG_BSESSEND;
|
||
+ l |= OTG_BSESSVLD;
|
||
+ omap_writel(l, OTG_CTRL);
|
||
+
|
||
+ tu->otg.state = OTG_STATE_B_PERIPHERAL;
|
||
+ break;
|
||
+ case OTG_STATE_A_IDLE:
|
||
+ /* Session is now valid assuming the USB hub is driving Vbus */
|
||
+ tu->otg.state = OTG_STATE_A_HOST;
|
||
+ host_resume(tu);
|
||
+ break;
|
||
+ default:
|
||
+ break;
|
||
+ }
|
||
+ printk("USB cable connected\n");
|
||
+ } else {
|
||
+ switch (tu->otg.state) {
|
||
+ case OTG_STATE_B_PERIPHERAL:
|
||
+ if (tu->otg.gadget)
|
||
+ usb_gadget_vbus_disconnect(tu->otg.gadget);
|
||
+ tu->otg.state = OTG_STATE_B_IDLE;
|
||
+ break;
|
||
+ case OTG_STATE_A_HOST:
|
||
+ tu->otg.state = OTG_STATE_A_IDLE;
|
||
+ break;
|
||
+ default:
|
||
+ break;
|
||
+ }
|
||
+ printk("USB cable disconnected\n");
|
||
+ vbus_active = 0;
|
||
+ }
|
||
+
|
||
+ prev_state = tu->vbus_state;
|
||
+ tu->vbus_state = reg & 0x01;
|
||
+ if (prev_state != tu->vbus_state)
|
||
+ sysfs_notify(&tu->pt_dev->dev.kobj, NULL, "vbus_state");
|
||
+}
|
||
+
|
||
+static void tahvo_usb_become_host(struct tahvo_usb *tu)
|
||
+{
|
||
+ u32 l;
|
||
+
|
||
+ /* Clear system and transceiver controlled bits
|
||
+ * also mark the A-session is always valid */
|
||
+ omap_otg_init();
|
||
+
|
||
+ l = omap_readl(OTG_CTRL);
|
||
+ l &= ~(OTG_CTRL_XCVR_MASK | OTG_CTRL_SYS_MASK);
|
||
+ l |= OTG_ASESSVLD;
|
||
+ omap_writel(l, OTG_CTRL);
|
||
+
|
||
+ /* Power up the transceiver in USB host mode */
|
||
+ tahvo_write_reg(TAHVO_REG_USBR, USBR_REGOUT | USBR_NSUSPEND |
|
||
+ USBR_MASTER_SW2 | USBR_MASTER_SW1);
|
||
+ tu->otg.state = OTG_STATE_A_IDLE;
|
||
+
|
||
+ check_vbus_state(tu);
|
||
+}
|
||
+
|
||
+static void tahvo_usb_stop_host(struct tahvo_usb *tu)
|
||
+{
|
||
+ host_suspend(tu);
|
||
+ tu->otg.state = OTG_STATE_A_IDLE;
|
||
+}
|
||
+
|
||
+static void tahvo_usb_become_peripheral(struct tahvo_usb *tu)
|
||
+{
|
||
+ u32 l;
|
||
+
|
||
+ /* Clear system and transceiver controlled bits
|
||
+ * and enable ID to mark peripheral mode and
|
||
+ * BSESSEND to mark no Vbus */
|
||
+ omap_otg_init();
|
||
+ l = omap_readl(OTG_CTRL);
|
||
+ l &= ~(OTG_CTRL_XCVR_MASK | OTG_CTRL_SYS_MASK | OTG_BSESSVLD);
|
||
+ l |= OTG_ID | OTG_BSESSEND;
|
||
+ omap_writel(l, OTG_CTRL);
|
||
+
|
||
+ /* Power up transceiver and set it in USB perhiperal mode */
|
||
+ tahvo_write_reg(TAHVO_REG_USBR, USBR_SLAVE_CONTROL | USBR_REGOUT | USBR_NSUSPEND | USBR_SLAVE_SW);
|
||
+ tu->otg.state = OTG_STATE_B_IDLE;
|
||
+
|
||
+ check_vbus_state(tu);
|
||
+}
|
||
+
|
||
+static void tahvo_usb_stop_peripheral(struct tahvo_usb *tu)
|
||
+{
|
||
+ u32 l;
|
||
+
|
||
+ l = omap_readl(OTG_CTRL);
|
||
+ l &= ~OTG_BSESSVLD;
|
||
+ l |= OTG_BSESSEND;
|
||
+ omap_writel(l, OTG_CTRL);
|
||
+
|
||
+ if (tu->otg.gadget)
|
||
+ usb_gadget_vbus_disconnect(tu->otg.gadget);
|
||
+ tu->otg.state = OTG_STATE_B_IDLE;
|
||
+
|
||
+}
|
||
+
|
||
+static void tahvo_usb_power_off(struct tahvo_usb *tu)
|
||
+{
|
||
+ u32 l;
|
||
+ int id;
|
||
+
|
||
+ /* Disable gadget controller if any */
|
||
+ if (tu->otg.gadget)
|
||
+ usb_gadget_vbus_disconnect(tu->otg.gadget);
|
||
+
|
||
+ host_suspend(tu);
|
||
+
|
||
+ /* Disable OTG and interrupts */
|
||
+ if (TAHVO_MODE(tu) == TAHVO_MODE_PERIPHERAL)
|
||
+ id = OTG_ID;
|
||
+ else
|
||
+ id = 0;
|
||
+ l = omap_readl(OTG_CTRL);
|
||
+ l &= ~(OTG_CTRL_XCVR_MASK | OTG_CTRL_SYS_MASK | OTG_BSESSVLD);
|
||
+ l |= id | OTG_BSESSEND;
|
||
+ omap_writel(l, OTG_CTRL);
|
||
+ omap_writew(0, OTG_IRQ_EN);
|
||
+
|
||
+ l = omap_readl(OTG_SYSCON_2);
|
||
+ l &= ~OTG_EN;
|
||
+ omap_writel(l, OTG_SYSCON_2);
|
||
+
|
||
+ l = omap_readl(OTG_SYSCON_1);
|
||
+ l |= OTG_IDLE_EN;
|
||
+ omap_writel(l, OTG_SYSCON_1);
|
||
+
|
||
+ /* Power off transceiver */
|
||
+ tahvo_write_reg(TAHVO_REG_USBR, 0);
|
||
+ tu->otg.state = OTG_STATE_UNDEFINED;
|
||
+}
|
||
+
|
||
+
|
||
+static int tahvo_usb_set_power(struct otg_transceiver *dev, unsigned mA)
|
||
+{
|
||
+ struct tahvo_usb *tu = container_of(dev, struct tahvo_usb, otg);
|
||
+
|
||
+ dev_dbg(&tu->pt_dev->dev, "set_power %d mA\n", mA);
|
||
+
|
||
+ if (dev->state == OTG_STATE_B_PERIPHERAL) {
|
||
+ /* REVISIT: Can Tahvo charge battery from VBUS? */
|
||
+ }
|
||
+ return 0;
|
||
+}
|
||
+
|
||
+static int tahvo_usb_set_suspend(struct otg_transceiver *dev, int suspend)
|
||
+{
|
||
+ struct tahvo_usb *tu = container_of(dev, struct tahvo_usb, otg);
|
||
+ u16 w;
|
||
+
|
||
+ dev_dbg(&tu->pt_dev->dev, "set_suspend\n");
|
||
+
|
||
+ w = tahvo_read_reg(TAHVO_REG_USBR);
|
||
+ if (suspend)
|
||
+ w &= ~USBR_NSUSPEND;
|
||
+ else
|
||
+ w |= USBR_NSUSPEND;
|
||
+ tahvo_write_reg(TAHVO_REG_USBR, w);
|
||
+
|
||
+ return 0;
|
||
+}
|
||
+
|
||
+static int tahvo_usb_start_srp(struct otg_transceiver *dev)
|
||
+{
|
||
+ struct tahvo_usb *tu = container_of(dev, struct tahvo_usb, otg);
|
||
+ u32 otg_ctrl;
|
||
+
|
||
+ dev_dbg(&tu->pt_dev->dev, "start_srp\n");
|
||
+
|
||
+ if (!dev || tu->otg.state != OTG_STATE_B_IDLE)
|
||
+ return -ENODEV;
|
||
+
|
||
+ otg_ctrl = omap_readl(OTG_CTRL);
|
||
+ if (!(otg_ctrl & OTG_BSESSEND))
|
||
+ return -EINVAL;
|
||
+
|
||
+ otg_ctrl |= OTG_B_BUSREQ;
|
||
+ otg_ctrl &= ~OTG_A_BUSREQ & OTG_CTRL_SYS_MASK;
|
||
+ omap_writel(otg_ctrl, OTG_CTRL);
|
||
+ tu->otg.state = OTG_STATE_B_SRP_INIT;
|
||
+
|
||
+ return 0;
|
||
+}
|
||
+
|
||
+static int tahvo_usb_start_hnp(struct otg_transceiver *otg)
|
||
+{
|
||
+ struct tahvo_usb *tu = container_of(otg, struct tahvo_usb, otg);
|
||
+
|
||
+ dev_dbg(&tu->pt_dev->dev, "start_hnp\n");
|
||
+#ifdef CONFIG_USB_OTG
|
||
+ /* REVISIT: Add this for OTG */
|
||
+#endif
|
||
+ return -EINVAL;
|
||
+}
|
||
+
|
||
+static int tahvo_usb_set_host(struct otg_transceiver *otg, struct usb_bus *host)
|
||
+{
|
||
+ struct tahvo_usb *tu = container_of(otg, struct tahvo_usb, otg);
|
||
+ u32 l;
|
||
+
|
||
+ dev_dbg(&tu->pt_dev->dev, "set_host %p\n", host);
|
||
+
|
||
+ if (otg == NULL)
|
||
+ return -ENODEV;
|
||
+
|
||
+#if defined(CONFIG_USB_OTG) || !defined(CONFIG_USB_GADGET_OMAP)
|
||
+
|
||
+ mutex_lock(&tu->serialize);
|
||
+
|
||
+ if (host == NULL) {
|
||
+ if (TAHVO_MODE(tu) == TAHVO_MODE_HOST)
|
||
+ tahvo_usb_power_off(tu);
|
||
+ tu->otg.host = NULL;
|
||
+ mutex_unlock(&tu->serialize);
|
||
+ return 0;
|
||
+ }
|
||
+
|
||
+ l = omap_readl(OTG_SYSCON_1);
|
||
+ l &= ~(OTG_IDLE_EN | HST_IDLE_EN | DEV_IDLE_EN);
|
||
+ omap_writel(l, OTG_SYSCON_1);
|
||
+
|
||
+ if (TAHVO_MODE(tu) == TAHVO_MODE_HOST) {
|
||
+ tu->otg.host = NULL;
|
||
+ tahvo_usb_become_host(tu);
|
||
+ } else
|
||
+ host_suspend(tu);
|
||
+
|
||
+ tu->otg.host = host;
|
||
+
|
||
+ mutex_unlock(&tu->serialize);
|
||
+#else
|
||
+ /* No host mode configured, so do not allow host controlled to be set */
|
||
+ return -EINVAL;
|
||
+#endif
|
||
+
|
||
+ return 0;
|
||
+}
|
||
+
|
||
+static int tahvo_usb_set_peripheral(struct otg_transceiver *otg, struct usb_gadget *gadget)
|
||
+{
|
||
+ struct tahvo_usb *tu = container_of(otg, struct tahvo_usb, otg);
|
||
+
|
||
+ dev_dbg(&tu->pt_dev->dev, "set_peripheral %p\n", gadget);
|
||
+
|
||
+ if (!otg)
|
||
+ return -ENODEV;
|
||
+
|
||
+#if defined(CONFIG_USB_OTG) || defined(CONFIG_USB_GADGET_OMAP)
|
||
+
|
||
+ mutex_lock(&tu->serialize);
|
||
+
|
||
+ if (!gadget) {
|
||
+ if (TAHVO_MODE(tu) == TAHVO_MODE_PERIPHERAL)
|
||
+ tahvo_usb_power_off(tu);
|
||
+ tu->otg.gadget = NULL;
|
||
+ mutex_unlock(&tu->serialize);
|
||
+ return 0;
|
||
+ }
|
||
+
|
||
+ tu->otg.gadget = gadget;
|
||
+ if (TAHVO_MODE(tu) == TAHVO_MODE_PERIPHERAL)
|
||
+ tahvo_usb_become_peripheral(tu);
|
||
+
|
||
+ mutex_unlock(&tu->serialize);
|
||
+#else
|
||
+ /* No gadget mode configured, so do not allow host controlled to be set */
|
||
+ return -EINVAL;
|
||
+#endif
|
||
+
|
||
+ return 0;
|
||
+}
|
||
+
|
||
+static void tahvo_usb_irq_work(struct work_struct *work)
|
||
+{
|
||
+ struct tahvo_usb *tu = container_of(work, struct tahvo_usb, irq_work);
|
||
+
|
||
+ mutex_lock(&tu->serialize);
|
||
+ check_vbus_state(tu);
|
||
+ mutex_unlock(&tu->serialize);
|
||
+}
|
||
+
|
||
+static void tahvo_usb_vbus_interrupt(unsigned long arg)
|
||
+{
|
||
+ struct tahvo_usb *tu = (struct tahvo_usb *) arg;
|
||
+
|
||
+ tahvo_ack_irq(TAHVO_INT_VBUSON);
|
||
+ /* Seems we need this to acknowledge the interrupt */
|
||
+ tahvo_read_reg(TAHVO_REG_IDSR);
|
||
+ schedule_work(&tu->irq_work);
|
||
+}
|
||
+
|
||
+#ifdef CONFIG_USB_OTG
|
||
+static ssize_t otg_mode_show(struct device *device,
|
||
+ struct device_attribute *attr, char *buf)
|
||
+{
|
||
+ struct tahvo_usb *tu = (struct tahvo_usb*) device->driver_data;
|
||
+ switch (tu->tahvo_mode) {
|
||
+ case TAHVO_MODE_HOST:
|
||
+ return sprintf(buf, "host\n");
|
||
+ case TAHVO_MODE_PERIPHERAL:
|
||
+ return sprintf(buf, "peripheral\n");
|
||
+ }
|
||
+ return sprintf(buf, "unknown\n");
|
||
+}
|
||
+
|
||
+static ssize_t otg_mode_store(struct device *device,
|
||
+ struct device_attribute *attr,
|
||
+ const char *buf, size_t count)
|
||
+{
|
||
+ struct tahvo_usb *tu = (struct tahvo_usb*) device->driver_data;
|
||
+ int r;
|
||
+
|
||
+ r = strlen(buf);
|
||
+ mutex_lock(&tu->serialize);
|
||
+ if (strncmp(buf, "host", 4) == 0) {
|
||
+ if (tu->tahvo_mode == TAHVO_MODE_PERIPHERAL)
|
||
+ tahvo_usb_stop_peripheral(tu);
|
||
+ tu->tahvo_mode = TAHVO_MODE_HOST;
|
||
+ if (tu->otg.host) {
|
||
+ printk(KERN_INFO "Selected HOST mode: host controller present.\n");
|
||
+ tahvo_usb_become_host(tu);
|
||
+ } else {
|
||
+ printk(KERN_INFO "Selected HOST mode: no host controller, powering off.\n");
|
||
+ tahvo_usb_power_off(tu);
|
||
+ }
|
||
+ } else if (strncmp(buf, "peripheral", 10) == 0) {
|
||
+ if (tu->tahvo_mode == TAHVO_MODE_HOST)
|
||
+ tahvo_usb_stop_host(tu);
|
||
+ tu->tahvo_mode = TAHVO_MODE_PERIPHERAL;
|
||
+ if (tu->otg.gadget) {
|
||
+ printk(KERN_INFO "Selected PERIPHERAL mode: gadget driver present.\n");
|
||
+ tahvo_usb_become_peripheral(tu);
|
||
+ } else {
|
||
+ printk(KERN_INFO "Selected PERIPHERAL mode: no gadget driver, powering off.\n");
|
||
+ tahvo_usb_power_off(tu);
|
||
+ }
|
||
+ } else
|
||
+ r = -EINVAL;
|
||
+
|
||
+ mutex_unlock(&tu->serialize);
|
||
+ return r;
|
||
+}
|
||
+
|
||
+static DEVICE_ATTR(otg_mode, 0644, otg_mode_show, otg_mode_store);
|
||
+#endif
|
||
+
|
||
+static int tahvo_usb_probe(struct device *dev)
|
||
+{
|
||
+ struct tahvo_usb *tu;
|
||
+ int ret;
|
||
+
|
||
+ dev_dbg(dev, "probe\n");
|
||
+
|
||
+ /* Create driver data */
|
||
+ tu = kmalloc(sizeof(*tu), GFP_KERNEL);
|
||
+ if (!tu)
|
||
+ return -ENOMEM;
|
||
+ memset(tu, 0, sizeof(*tu));
|
||
+ tu->pt_dev = container_of(dev, struct platform_device, dev);
|
||
+#ifdef CONFIG_USB_OTG
|
||
+ /* Default mode */
|
||
+#ifdef CONFIG_CBUS_TAHVO_USB_HOST_BY_DEFAULT
|
||
+ tu->tahvo_mode = TAHVO_MODE_HOST;
|
||
+#else
|
||
+ tu->tahvo_mode = TAHVO_MODE_PERIPHERAL;
|
||
+#endif
|
||
+#endif
|
||
+
|
||
+ INIT_WORK(&tu->irq_work, tahvo_usb_irq_work);
|
||
+ mutex_init(&tu->serialize);
|
||
+
|
||
+ /* Set initial state, so that we generate kevents only on
|
||
+ * state changes */
|
||
+ tu->vbus_state = tahvo_read_reg(TAHVO_REG_IDSR) & 0x01;
|
||
+
|
||
+ /* We cannot enable interrupt until omap_udc is initialized */
|
||
+ ret = tahvo_request_irq(TAHVO_INT_VBUSON, tahvo_usb_vbus_interrupt,
|
||
+ (unsigned long) tu, "vbus_interrupt");
|
||
+ if (ret != 0) {
|
||
+ kfree(tu);
|
||
+ printk(KERN_ERR "Could not register Tahvo interrupt for VBUS\n");
|
||
+ return ret;
|
||
+ }
|
||
+
|
||
+ /* Attributes */
|
||
+ ret = device_create_file(dev, &dev_attr_vbus_state);
|
||
+#ifdef CONFIG_USB_OTG
|
||
+ ret |= device_create_file(dev, &dev_attr_otg_mode);
|
||
+#endif
|
||
+ if (ret)
|
||
+ printk(KERN_ERR "attribute creation failed: %d\n", ret);
|
||
+
|
||
+ /* Create OTG interface */
|
||
+ tahvo_usb_power_off(tu);
|
||
+ tu->otg.state = OTG_STATE_UNDEFINED;
|
||
+ tu->otg.label = DRIVER_NAME;
|
||
+ tu->otg.set_host = tahvo_usb_set_host;
|
||
+ tu->otg.set_peripheral = tahvo_usb_set_peripheral;
|
||
+ tu->otg.set_power = tahvo_usb_set_power;
|
||
+ tu->otg.set_suspend = tahvo_usb_set_suspend;
|
||
+ tu->otg.start_srp = tahvo_usb_start_srp;
|
||
+ tu->otg.start_hnp = tahvo_usb_start_hnp;
|
||
+
|
||
+ ret = otg_set_transceiver(&tu->otg);
|
||
+ if (ret < 0) {
|
||
+ printk(KERN_ERR "Cannot register USB transceiver\n");
|
||
+ kfree(tu);
|
||
+ tahvo_free_irq(TAHVO_INT_VBUSON);
|
||
+ return ret;
|
||
+ }
|
||
+
|
||
+ dev->driver_data = tu;
|
||
+
|
||
+ /* Act upon current vbus state once at startup. A vbus state irq may or
|
||
+ * may not be generated in addition to this. */
|
||
+ schedule_work(&tu->irq_work);
|
||
+ return 0;
|
||
+}
|
||
+
|
||
+static int tahvo_usb_remove(struct device *dev)
|
||
+{
|
||
+ dev_dbg(dev, "remove\n");
|
||
+
|
||
+ tahvo_free_irq(TAHVO_INT_VBUSON);
|
||
+ flush_scheduled_work();
|
||
+ otg_set_transceiver(0);
|
||
+ device_remove_file(dev, &dev_attr_vbus_state);
|
||
+#ifdef CONFIG_USB_OTG
|
||
+ device_remove_file(dev, &dev_attr_otg_mode);
|
||
+#endif
|
||
+ return 0;
|
||
+}
|
||
+
|
||
+static struct device_driver tahvo_usb_driver = {
|
||
+ .name = "tahvo-usb",
|
||
+ .bus = &platform_bus_type,
|
||
+ .probe = tahvo_usb_probe,
|
||
+ .remove = tahvo_usb_remove,
|
||
+};
|
||
+
|
||
+static struct platform_device tahvo_usb_device = {
|
||
+ .name = "tahvo-usb",
|
||
+ .id = -1,
|
||
+};
|
||
+
|
||
+static int __init tahvo_usb_init(void)
|
||
+{
|
||
+ int ret = 0;
|
||
+
|
||
+ printk(KERN_INFO "Tahvo USB transceiver driver initializing\n");
|
||
+ ret = driver_register(&tahvo_usb_driver);
|
||
+ if (ret)
|
||
+ return ret;
|
||
+ ret = platform_device_register(&tahvo_usb_device);
|
||
+ if (ret < 0) {
|
||
+ driver_unregister(&tahvo_usb_driver);
|
||
+ return ret;
|
||
+ }
|
||
+ ret = driver_register(&omap_otg_driver);
|
||
+ if (ret) {
|
||
+ platform_device_unregister(&tahvo_usb_device);
|
||
+ driver_unregister(&tahvo_usb_driver);
|
||
+ return ret;
|
||
+ }
|
||
+ return 0;
|
||
+}
|
||
+
|
||
+subsys_initcall(tahvo_usb_init);
|
||
+
|
||
+static void __exit tahvo_usb_exit(void)
|
||
+{
|
||
+ driver_unregister(&omap_otg_driver);
|
||
+ platform_device_unregister(&tahvo_usb_device);
|
||
+ driver_unregister(&tahvo_usb_driver);
|
||
+}
|
||
+module_exit(tahvo_usb_exit);
|
||
+
|
||
+MODULE_DESCRIPTION("Tahvo USB OTG Transceiver Driver");
|
||
+MODULE_LICENSE("GPL");
|
||
+MODULE_AUTHOR("Juha Yrj<72>l<EFBFBD>, Tony Lindgren, and Timo Ter<65>s");
|
||
diff --git a/drivers/cbus/tahvo-user.c b/drivers/cbus/tahvo-user.c
|
||
new file mode 100644
|
||
index 0000000..873d648
|
||
--- /dev/null
|
||
+++ b/drivers/cbus/tahvo-user.c
|
||
@@ -0,0 +1,405 @@
|
||
+/**
|
||
+ * drivers/cbus/tahvo-user.c
|
||
+ *
|
||
+ * Tahvo user space interface functions
|
||
+ *
|
||
+ * Copyright (C) 2004, 2005 Nokia Corporation
|
||
+ *
|
||
+ * Written by Mikko Ylinen <mikko.k.ylinen@nokia.com>
|
||
+ *
|
||
+ * This file is subject to the terms and conditions of the GNU General
|
||
+ * Public License. See the file "COPYING" in the main directory of this
|
||
+ * archive for more details.
|
||
+ *
|
||
+ * This program is distributed in the hope that it will be useful,
|
||
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
+ * GNU General Public License for more details.
|
||
+ *
|
||
+ * You should have received a copy of the GNU General Public License
|
||
+ * along with this program; if not, write to the Free Software
|
||
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||
+ */
|
||
+
|
||
+#include <linux/types.h>
|
||
+#include <linux/kernel.h>
|
||
+#include <linux/interrupt.h>
|
||
+#include <linux/module.h>
|
||
+#include <linux/init.h>
|
||
+#include <linux/fs.h>
|
||
+#include <linux/miscdevice.h>
|
||
+#include <linux/poll.h>
|
||
+#include <linux/list.h>
|
||
+#include <linux/spinlock.h>
|
||
+#include <linux/mutex.h>
|
||
+
|
||
+#include <asm/uaccess.h>
|
||
+
|
||
+#include "tahvo.h"
|
||
+
|
||
+#include "user_retu_tahvo.h"
|
||
+
|
||
+/* Maximum size of IRQ node buffer/pool */
|
||
+#define TAHVO_MAX_IRQ_BUF_LEN 16
|
||
+
|
||
+#define PFX "tahvo-user: "
|
||
+
|
||
+/* Bitmap for marking the interrupt sources as having the handlers */
|
||
+static u32 tahvo_irq_bits;
|
||
+
|
||
+/* For allowing only one user process to subscribe to the tahvo interrupts */
|
||
+static struct file *tahvo_irq_subscr = NULL;
|
||
+
|
||
+/* For poll and IRQ passing */
|
||
+struct tahvo_irq {
|
||
+ u32 id;
|
||
+ struct list_head node;
|
||
+};
|
||
+
|
||
+static spinlock_t tahvo_irqs_lock;
|
||
+static struct tahvo_irq *tahvo_irq_block;
|
||
+static LIST_HEAD(tahvo_irqs);
|
||
+static LIST_HEAD(tahvo_irqs_reserve);
|
||
+
|
||
+/* Wait queue - used when user wants to read the device */
|
||
+DECLARE_WAIT_QUEUE_HEAD(tahvo_user_waitqueue);
|
||
+
|
||
+/* Semaphore to protect irq subscription sequence */
|
||
+static struct mutex tahvo_mutex;
|
||
+
|
||
+/* This array specifies TAHVO register types (read/write/toggle) */
|
||
+static const u8 tahvo_access_bits[] = {
|
||
+ 1,
|
||
+ 4,
|
||
+ 1,
|
||
+ 3,
|
||
+ 3,
|
||
+ 3,
|
||
+ 3,
|
||
+ 3,
|
||
+ 3,
|
||
+ 3,
|
||
+ 3,
|
||
+ 3,
|
||
+ 3,
|
||
+ 1
|
||
+};
|
||
+
|
||
+/*
|
||
+ * The handler for all TAHVO interrupts.
|
||
+ *
|
||
+ * arg is the interrupt source in TAHVO.
|
||
+ */
|
||
+static void tahvo_user_irq_handler(unsigned long arg)
|
||
+{
|
||
+ struct tahvo_irq *irq;
|
||
+
|
||
+ /* user has to re-enable the interrupt once ready
|
||
+ * for receiving them again */
|
||
+ tahvo_disable_irq(arg);
|
||
+ tahvo_ack_irq(arg);
|
||
+
|
||
+ spin_lock(&tahvo_irqs_lock);
|
||
+ if (list_empty(&tahvo_irqs_reserve)) {
|
||
+ spin_unlock(&tahvo_irqs_lock);
|
||
+ return;
|
||
+ }
|
||
+ irq = list_entry((&tahvo_irqs_reserve)->next, struct tahvo_irq, node);
|
||
+ irq->id = arg;
|
||
+ list_move_tail(&irq->node, &tahvo_irqs);
|
||
+ spin_unlock(&tahvo_irqs_lock);
|
||
+
|
||
+ /* wake up waiting thread */
|
||
+ wake_up(&tahvo_user_waitqueue);
|
||
+}
|
||
+
|
||
+/*
|
||
+ * This routine sets up the interrupt handler and marks an interrupt source
|
||
+ * in TAHVO as a candidate for signal delivery to the user process.
|
||
+ */
|
||
+static int tahvo_user_subscribe_to_irq(int id, struct file *filp)
|
||
+{
|
||
+ int ret;
|
||
+
|
||
+ mutex_lock(&tahvo_mutex);
|
||
+ if ((tahvo_irq_subscr != NULL) && (tahvo_irq_subscr != filp)) {
|
||
+ mutex_unlock(&tahvo_mutex);
|
||
+ return -EBUSY;
|
||
+ }
|
||
+ /* Store the file pointer of the first user process registering IRQs */
|
||
+ tahvo_irq_subscr = filp;
|
||
+ mutex_unlock(&tahvo_mutex);
|
||
+
|
||
+ if (tahvo_irq_bits & (1 << id))
|
||
+ return 0;
|
||
+
|
||
+ ret = tahvo_request_irq(id, tahvo_user_irq_handler, id, "");
|
||
+ if (ret < 0)
|
||
+ return ret;
|
||
+
|
||
+ /* Mark that this interrupt has a handler */
|
||
+ tahvo_irq_bits |= 1 << id;
|
||
+
|
||
+ return 0;
|
||
+}
|
||
+
|
||
+/*
|
||
+ * Unregister all TAHVO interrupt handlers
|
||
+ */
|
||
+static void tahvo_unreg_irq_handlers(void)
|
||
+{
|
||
+ int id;
|
||
+
|
||
+ if (!tahvo_irq_bits)
|
||
+ return;
|
||
+
|
||
+ for (id = 0; id < MAX_TAHVO_IRQ_HANDLERS; id++)
|
||
+ if (tahvo_irq_bits & (1 << id))
|
||
+ tahvo_free_irq(id);
|
||
+
|
||
+ tahvo_irq_bits = 0;
|
||
+}
|
||
+
|
||
+/*
|
||
+ * Write to TAHVO register.
|
||
+ * Returns 0 upon success, a negative error value otherwise.
|
||
+ */
|
||
+static int tahvo_user_write_with_mask(u32 field, u16 value)
|
||
+{
|
||
+ u32 mask;
|
||
+ u32 reg;
|
||
+ u_short tmp;
|
||
+ unsigned long flags;
|
||
+
|
||
+ mask = MASK(field);
|
||
+ reg = REG(field);
|
||
+
|
||
+ /* Detect bad mask and reg */
|
||
+ if (mask == 0 || reg > TAHVO_REG_MAX ||
|
||
+ tahvo_access_bits[reg] == READ_ONLY) {
|
||
+ printk(KERN_ERR PFX "invalid arguments (reg=%#x, mask=%#x)\n",
|
||
+ reg, mask);
|
||
+ return -EINVAL;
|
||
+ }
|
||
+
|
||
+ /* Justify value according to mask */
|
||
+ while (!(mask & 1)) {
|
||
+ value = value << 1;
|
||
+ mask = mask >> 1;
|
||
+ }
|
||
+
|
||
+ spin_lock_irqsave(&tahvo_lock, flags);
|
||
+ if (tahvo_access_bits[reg] == TOGGLE) {
|
||
+ /* No need to detect previous content of register */
|
||
+ tmp = 0;
|
||
+ } else {
|
||
+ /* Read current value of register */
|
||
+ tmp = tahvo_read_reg(reg);
|
||
+ }
|
||
+ /* Generate a new value */
|
||
+ tmp = (tmp & ~MASK(field)) | (value & MASK(field));
|
||
+ /* Write data to TAHVO */
|
||
+ tahvo_write_reg(reg, tmp);
|
||
+ spin_unlock_irqrestore(&tahvo_lock, flags);
|
||
+
|
||
+ return 0;
|
||
+}
|
||
+
|
||
+/*
|
||
+ * Read TAHVO register.
|
||
+ */
|
||
+static u32 tahvo_user_read_with_mask(u32 field)
|
||
+{
|
||
+ u_short value;
|
||
+ u32 mask, reg;
|
||
+
|
||
+ mask = MASK(field);
|
||
+ reg = REG(field);
|
||
+
|
||
+ /* Detect bad mask and reg */
|
||
+ if (mask == 0 || reg > TAHVO_REG_MAX) {
|
||
+ printk(KERN_ERR PFX "invalid arguments (reg=%#x, mask=%#x)\n",
|
||
+ reg, mask);
|
||
+ return -EINVAL;
|
||
+ }
|
||
+
|
||
+ /* Read the register */
|
||
+ value = tahvo_read_reg(reg) & mask;
|
||
+
|
||
+ /* Right justify value */
|
||
+ while (!(mask & 1)) {
|
||
+ value = value >> 1;
|
||
+ mask = mask >> 1;
|
||
+ }
|
||
+
|
||
+ return value;
|
||
+}
|
||
+
|
||
+/*
|
||
+ * Close device
|
||
+ */
|
||
+static int tahvo_close(struct inode *inode, struct file *filp)
|
||
+{
|
||
+ /* Unregister all interrupts that have been registered */
|
||
+ if (tahvo_irq_subscr == filp) {
|
||
+ tahvo_unreg_irq_handlers();
|
||
+ tahvo_irq_subscr = NULL;
|
||
+ }
|
||
+
|
||
+ return 0;
|
||
+}
|
||
+
|
||
+/*
|
||
+ * Device control (ioctl)
|
||
+ */
|
||
+static int tahvo_ioctl(struct inode *inode, struct file *filp,
|
||
+ unsigned int cmd, unsigned long arg)
|
||
+{
|
||
+ struct retu_tahvo_write_parms par;
|
||
+ int ret;
|
||
+
|
||
+ switch (cmd) {
|
||
+ case URT_IOCT_IRQ_SUBSCR:
|
||
+ return tahvo_user_subscribe_to_irq(arg, filp);
|
||
+ case TAHVO_IOCH_READ:
|
||
+ return tahvo_user_read_with_mask(arg);
|
||
+ case TAHVO_IOCX_WRITE:
|
||
+ ret = copy_from_user(&par, (void __user *) arg, sizeof(par));
|
||
+ if (ret)
|
||
+ printk(KERN_ERR "copy_from_user failed: %d\n", ret);
|
||
+ par.result = tahvo_user_write_with_mask(par.field, par.value);
|
||
+ ret = copy_to_user((void __user *) arg, &par, sizeof(par));
|
||
+ if (ret)
|
||
+ printk(KERN_ERR "copy_to_user failed: %d\n", ret);
|
||
+ break;
|
||
+ default:
|
||
+ return -ENOIOCTLCMD;
|
||
+ }
|
||
+ return 0;
|
||
+}
|
||
+
|
||
+/*
|
||
+ * Read from device
|
||
+ */
|
||
+static ssize_t tahvo_read(struct file *filp, char *buf, size_t count,
|
||
+ loff_t * offp)
|
||
+{
|
||
+ struct tahvo_irq *irq;
|
||
+
|
||
+ u32 nr, i;
|
||
+
|
||
+ /* read not permitted if neither filp nor anyone has registered IRQs */
|
||
+ if (tahvo_irq_subscr != filp)
|
||
+ return -EPERM;
|
||
+
|
||
+ if ((count < sizeof(u32)) || ((count % sizeof(u32)) != 0))
|
||
+ return -EINVAL;
|
||
+
|
||
+ nr = count / sizeof(u32);
|
||
+
|
||
+ for (i = 0; i < nr; i++) {
|
||
+ unsigned long flags;
|
||
+ u32 irq_id;
|
||
+ int ret;
|
||
+
|
||
+ ret = wait_event_interruptible(tahvo_user_waitqueue,
|
||
+ !list_empty(&tahvo_irqs));
|
||
+ if (ret < 0)
|
||
+ return ret;
|
||
+
|
||
+ spin_lock_irqsave(&tahvo_irqs_lock, flags);
|
||
+ irq = list_entry((&tahvo_irqs)->next, struct tahvo_irq, node);
|
||
+ irq_id = irq->id;
|
||
+ list_move(&irq->node, &tahvo_irqs_reserve);
|
||
+ spin_unlock_irqrestore(&tahvo_irqs_lock, flags);
|
||
+
|
||
+ ret = copy_to_user(buf + i * sizeof(irq_id), &irq_id,
|
||
+ sizeof(irq_id));
|
||
+ if (ret)
|
||
+ printk(KERN_ERR "copy_to_user failed: %d\n", ret);
|
||
+ }
|
||
+
|
||
+ return count;
|
||
+}
|
||
+
|
||
+/*
|
||
+ * Poll method
|
||
+ */
|
||
+static unsigned tahvo_poll(struct file *filp, struct poll_table_struct *pt)
|
||
+{
|
||
+ if (!list_empty(&tahvo_irqs))
|
||
+ return POLLIN;
|
||
+
|
||
+ poll_wait(filp, &tahvo_user_waitqueue, pt);
|
||
+
|
||
+ if (!list_empty(&tahvo_irqs))
|
||
+ return POLLIN;
|
||
+ else
|
||
+ return 0;
|
||
+}
|
||
+
|
||
+static struct file_operations tahvo_user_fileops = {
|
||
+ .owner = THIS_MODULE,
|
||
+ .ioctl = tahvo_ioctl,
|
||
+ .read = tahvo_read,
|
||
+ .release = tahvo_close,
|
||
+ .poll = tahvo_poll
|
||
+};
|
||
+
|
||
+static struct miscdevice tahvo_device = {
|
||
+ .minor = MISC_DYNAMIC_MINOR,
|
||
+ .name = "tahvo",
|
||
+ .fops = &tahvo_user_fileops
|
||
+};
|
||
+
|
||
+/*
|
||
+ * Initialization
|
||
+ *
|
||
+ * @return 0 if successful, error value otherwise.
|
||
+ */
|
||
+int tahvo_user_init(void)
|
||
+{
|
||
+ struct tahvo_irq *irq;
|
||
+ int res, i;
|
||
+
|
||
+ irq = kmalloc(sizeof(*irq) * TAHVO_MAX_IRQ_BUF_LEN, GFP_KERNEL);
|
||
+ if (irq == NULL) {
|
||
+ printk(KERN_ERR PFX "kmalloc failed\n");
|
||
+ return -ENOMEM;
|
||
+ }
|
||
+ memset(irq, 0, sizeof(*irq) * TAHVO_MAX_IRQ_BUF_LEN);
|
||
+ for (i = 0; i < TAHVO_MAX_IRQ_BUF_LEN; i++)
|
||
+ list_add(&irq[i].node, &tahvo_irqs_reserve);
|
||
+
|
||
+ tahvo_irq_block = irq;
|
||
+
|
||
+ spin_lock_init(&tahvo_irqs_lock);
|
||
+ mutex_init(&tahvo_mutex);
|
||
+
|
||
+ /* Request a misc device */
|
||
+ res = misc_register(&tahvo_device);
|
||
+ if (res < 0) {
|
||
+ printk(KERN_ERR PFX "unable to register misc device for %s\n",
|
||
+ tahvo_device.name);
|
||
+ kfree(irq);
|
||
+ return res;
|
||
+ }
|
||
+
|
||
+ return 0;
|
||
+}
|
||
+
|
||
+/*
|
||
+ * Cleanup.
|
||
+ */
|
||
+void tahvo_user_cleanup(void)
|
||
+{
|
||
+ /* Unregister our misc device */
|
||
+ misc_deregister(&tahvo_device);
|
||
+ /* Unregister and disable all TAHVO interrupts */
|
||
+ tahvo_unreg_irq_handlers();
|
||
+ kfree(tahvo_irq_block);
|
||
+}
|
||
+
|
||
+MODULE_DESCRIPTION("Tahvo ASIC user space functions");
|
||
+MODULE_LICENSE("GPL");
|
||
+MODULE_AUTHOR("Mikko Ylinen");
|
||
diff --git a/drivers/cbus/tahvo.c b/drivers/cbus/tahvo.c
|
||
new file mode 100644
|
||
index 0000000..e734c4c
|
||
--- /dev/null
|
||
+++ b/drivers/cbus/tahvo.c
|
||
@@ -0,0 +1,442 @@
|
||
+/**
|
||
+ * drivers/cbus/tahvo.c
|
||
+ *
|
||
+ * Support functions for Tahvo ASIC
|
||
+ *
|
||
+ * Copyright (C) 2004, 2005 Nokia Corporation
|
||
+ *
|
||
+ * Written by Juha Yrj<72>l<EFBFBD> <juha.yrjola@nokia.com>,
|
||
+ * David Weinehall <david.weinehall@nokia.com>, and
|
||
+ * Mikko Ylinen <mikko.k.ylinen@nokia.com>
|
||
+ *
|
||
+ * This file is subject to the terms and conditions of the GNU General
|
||
+ * Public License. See the file "COPYING" in the main directory of this
|
||
+ * archive for more details.
|
||
+ *
|
||
+ * This program is distributed in the hope that it will be useful,
|
||
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
+ * GNU General Public License for more details.
|
||
+ *
|
||
+ * You should have received a copy of the GNU General Public License
|
||
+ * along with this program; if not, write to the Free Software
|
||
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||
+ */
|
||
+
|
||
+#include <linux/module.h>
|
||
+#include <linux/init.h>
|
||
+
|
||
+#include <linux/kernel.h>
|
||
+#include <linux/errno.h>
|
||
+#include <linux/device.h>
|
||
+#include <linux/miscdevice.h>
|
||
+#include <linux/poll.h>
|
||
+#include <linux/fs.h>
|
||
+#include <linux/irq.h>
|
||
+#include <linux/interrupt.h>
|
||
+#include <linux/platform_device.h>
|
||
+#include <linux/gpio.h>
|
||
+
|
||
+#include <asm/uaccess.h>
|
||
+
|
||
+#include <mach/mux.h>
|
||
+#include <mach/board.h>
|
||
+#include <mach/board-nokia.h>
|
||
+
|
||
+#include "cbus.h"
|
||
+#include "tahvo.h"
|
||
+
|
||
+#define TAHVO_ID 0x02
|
||
+#define PFX "tahvo: "
|
||
+
|
||
+static int tahvo_initialized;
|
||
+static int tahvo_irq_pin;
|
||
+static int tahvo_is_betty;
|
||
+
|
||
+static struct tasklet_struct tahvo_tasklet;
|
||
+spinlock_t tahvo_lock = SPIN_LOCK_UNLOCKED;
|
||
+
|
||
+static struct completion device_release;
|
||
+
|
||
+struct tahvo_irq_handler_desc {
|
||
+ int (*func)(unsigned long);
|
||
+ unsigned long arg;
|
||
+ char name[8];
|
||
+};
|
||
+
|
||
+static struct tahvo_irq_handler_desc tahvo_irq_handlers[MAX_TAHVO_IRQ_HANDLERS];
|
||
+
|
||
+/**
|
||
+ * tahvo_read_reg - Read a value from a register in Tahvo
|
||
+ * @reg: the register to read from
|
||
+ *
|
||
+ * This function returns the contents of the specified register
|
||
+ */
|
||
+int tahvo_read_reg(int reg)
|
||
+{
|
||
+ BUG_ON(!tahvo_initialized);
|
||
+ return cbus_read_reg(cbus_host, TAHVO_ID, reg);
|
||
+}
|
||
+
|
||
+/**
|
||
+ * tahvo_write_reg - Write a value to a register in Tahvo
|
||
+ * @reg: the register to write to
|
||
+ * @reg: the value to write to the register
|
||
+ *
|
||
+ * This function writes a value to the specified register
|
||
+ */
|
||
+void tahvo_write_reg(int reg, u16 val)
|
||
+{
|
||
+ BUG_ON(!tahvo_initialized);
|
||
+ cbus_write_reg(cbus_host, TAHVO_ID, reg, val);
|
||
+}
|
||
+
|
||
+/**
|
||
+ * tahvo_set_clear_reg_bits - set and clear register bits atomically
|
||
+ * @reg: the register to write to
|
||
+ * @bits: the bits to set
|
||
+ *
|
||
+ * This function sets and clears the specified Tahvo register bits atomically
|
||
+ */
|
||
+void tahvo_set_clear_reg_bits(int reg, u16 set, u16 clear)
|
||
+{
|
||
+ unsigned long flags;
|
||
+ u16 w;
|
||
+
|
||
+ spin_lock_irqsave(&tahvo_lock, flags);
|
||
+ w = tahvo_read_reg(reg);
|
||
+ w &= ~clear;
|
||
+ w |= set;
|
||
+ tahvo_write_reg(reg, w);
|
||
+ spin_unlock_irqrestore(&tahvo_lock, flags);
|
||
+}
|
||
+
|
||
+/*
|
||
+ * Disable given TAHVO interrupt
|
||
+ */
|
||
+void tahvo_disable_irq(int id)
|
||
+{
|
||
+ unsigned long flags;
|
||
+ u16 mask;
|
||
+
|
||
+ spin_lock_irqsave(&tahvo_lock, flags);
|
||
+ mask = tahvo_read_reg(TAHVO_REG_IMR);
|
||
+ mask |= 1 << id;
|
||
+ tahvo_write_reg(TAHVO_REG_IMR, mask);
|
||
+ spin_unlock_irqrestore(&tahvo_lock, flags);
|
||
+}
|
||
+
|
||
+/*
|
||
+ * Enable given TAHVO interrupt
|
||
+ */
|
||
+void tahvo_enable_irq(int id)
|
||
+{
|
||
+ unsigned long flags;
|
||
+ u16 mask;
|
||
+
|
||
+ spin_lock_irqsave(&tahvo_lock, flags);
|
||
+ mask = tahvo_read_reg(TAHVO_REG_IMR);
|
||
+ mask &= ~(1 << id);
|
||
+ tahvo_write_reg(TAHVO_REG_IMR, mask);
|
||
+ spin_unlock_irqrestore(&tahvo_lock, flags);
|
||
+}
|
||
+
|
||
+/*
|
||
+ * Acknowledge given TAHVO interrupt
|
||
+ */
|
||
+void tahvo_ack_irq(int id)
|
||
+{
|
||
+ tahvo_write_reg(TAHVO_REG_IDR, 1 << id);
|
||
+}
|
||
+
|
||
+static int tahvo_7bit_backlight;
|
||
+
|
||
+int tahvo_get_backlight_level(void)
|
||
+{
|
||
+ int mask;
|
||
+
|
||
+ if (tahvo_7bit_backlight)
|
||
+ mask = 0x7f;
|
||
+ else
|
||
+ mask = 0x0f;
|
||
+ return tahvo_read_reg(TAHVO_REG_LEDPWMR) & mask;
|
||
+}
|
||
+
|
||
+int tahvo_get_max_backlight_level(void)
|
||
+{
|
||
+ if (tahvo_7bit_backlight)
|
||
+ return 0x7f;
|
||
+ else
|
||
+ return 0x0f;
|
||
+}
|
||
+
|
||
+void tahvo_set_backlight_level(int level)
|
||
+{
|
||
+ int max_level;
|
||
+
|
||
+ max_level = tahvo_get_max_backlight_level();
|
||
+ if (level > max_level)
|
||
+ level = max_level;
|
||
+ tahvo_write_reg(TAHVO_REG_LEDPWMR, level);
|
||
+}
|
||
+
|
||
+/*
|
||
+ * TAHVO interrupt handler. Only schedules the tasklet.
|
||
+ */
|
||
+static irqreturn_t tahvo_irq_handler(int irq, void *dev_id)
|
||
+{
|
||
+ tasklet_schedule(&tahvo_tasklet);
|
||
+ return IRQ_HANDLED;
|
||
+}
|
||
+
|
||
+/*
|
||
+ * Tasklet handler
|
||
+ */
|
||
+static void tahvo_tasklet_handler(unsigned long data)
|
||
+{
|
||
+ struct tahvo_irq_handler_desc *hnd;
|
||
+ u16 id;
|
||
+ u16 im;
|
||
+ int i;
|
||
+
|
||
+ for (;;) {
|
||
+ id = tahvo_read_reg(TAHVO_REG_IDR);
|
||
+ im = ~tahvo_read_reg(TAHVO_REG_IMR);
|
||
+ id &= im;
|
||
+
|
||
+ if (!id)
|
||
+ break;
|
||
+
|
||
+ for (i = 0; id != 0; i++, id >>= 1) {
|
||
+ if (!(id & 1))
|
||
+ continue;
|
||
+ hnd = &tahvo_irq_handlers[i];
|
||
+ if (hnd->func == NULL) {
|
||
+ /* Spurious tahvo interrupt - just ack it */
|
||
+ printk(KERN_INFO "Spurious Tahvo interrupt "
|
||
+ "(id %d)\n", i);
|
||
+ tahvo_disable_irq(i);
|
||
+ tahvo_ack_irq(i);
|
||
+ continue;
|
||
+ }
|
||
+ hnd->func(hnd->arg);
|
||
+ /*
|
||
+ * Don't acknowledge the interrupt here
|
||
+ * It must be done explicitly
|
||
+ */
|
||
+ }
|
||
+ }
|
||
+}
|
||
+
|
||
+/*
|
||
+ * Register the handler for a given TAHVO interrupt source.
|
||
+ */
|
||
+int tahvo_request_irq(int id, void *irq_handler, unsigned long arg, char *name)
|
||
+{
|
||
+ struct tahvo_irq_handler_desc *hnd;
|
||
+
|
||
+ if (irq_handler == NULL || id >= MAX_TAHVO_IRQ_HANDLERS ||
|
||
+ name == NULL) {
|
||
+ printk(KERN_ERR PFX "Invalid arguments to %s\n",
|
||
+ __FUNCTION__);
|
||
+ return -EINVAL;
|
||
+ }
|
||
+ hnd = &tahvo_irq_handlers[id];
|
||
+ if (hnd->func != NULL) {
|
||
+ printk(KERN_ERR PFX "IRQ %d already reserved\n", id);
|
||
+ return -EBUSY;
|
||
+ }
|
||
+ printk(KERN_INFO PFX "Registering interrupt %d for device %s\n",
|
||
+ id, name);
|
||
+ hnd->func = irq_handler;
|
||
+ hnd->arg = arg;
|
||
+ strlcpy(hnd->name, name, sizeof(hnd->name));
|
||
+
|
||
+ tahvo_ack_irq(id);
|
||
+ tahvo_enable_irq(id);
|
||
+
|
||
+ return 0;
|
||
+}
|
||
+
|
||
+/*
|
||
+ * Unregister the handler for a given TAHVO interrupt source.
|
||
+ */
|
||
+void tahvo_free_irq(int id)
|
||
+{
|
||
+ struct tahvo_irq_handler_desc *hnd;
|
||
+
|
||
+ if (id >= MAX_TAHVO_IRQ_HANDLERS) {
|
||
+ printk(KERN_ERR PFX "Invalid argument to %s\n",
|
||
+ __FUNCTION__);
|
||
+ return;
|
||
+ }
|
||
+ hnd = &tahvo_irq_handlers[id];
|
||
+ if (hnd->func == NULL) {
|
||
+ printk(KERN_ERR PFX "IRQ %d already freed\n", id);
|
||
+ return;
|
||
+ }
|
||
+
|
||
+ tahvo_disable_irq(id);
|
||
+ hnd->func = NULL;
|
||
+}
|
||
+
|
||
+/**
|
||
+ * tahvo_probe - Probe for Tahvo ASIC
|
||
+ * @dev: the Tahvo device
|
||
+ *
|
||
+ * Probe for the Tahvo ASIC and allocate memory
|
||
+ * for its device-struct if found
|
||
+ */
|
||
+static int __devinit tahvo_probe(struct device *dev)
|
||
+{
|
||
+ const struct omap_em_asic_bb5_config * em_asic_config;
|
||
+ int rev, id, ret;
|
||
+
|
||
+ /* Prepare tasklet */
|
||
+ tasklet_init(&tahvo_tasklet, tahvo_tasklet_handler, 0);
|
||
+
|
||
+ em_asic_config = omap_get_config(OMAP_TAG_EM_ASIC_BB5,
|
||
+ struct omap_em_asic_bb5_config);
|
||
+ if (em_asic_config == NULL) {
|
||
+ printk(KERN_ERR PFX "Unable to retrieve config data\n");
|
||
+ return -ENODATA;
|
||
+ }
|
||
+
|
||
+ tahvo_initialized = 1;
|
||
+
|
||
+ rev = tahvo_read_reg(TAHVO_REG_ASICR);
|
||
+
|
||
+ id = (rev >> 8) & 0xff;
|
||
+ if (id == 0x03) {
|
||
+ if ((rev & 0xff) >= 0x50)
|
||
+ tahvo_7bit_backlight = 1;
|
||
+ } else if (id == 0x0b) {
|
||
+ tahvo_is_betty = 1;
|
||
+ tahvo_7bit_backlight = 1;
|
||
+ } else {
|
||
+ printk(KERN_ERR "Tahvo/Betty chip not found");
|
||
+ return -ENODEV;
|
||
+ }
|
||
+
|
||
+ printk(KERN_INFO "%s v%d.%d found\n", tahvo_is_betty ? "Betty" : "Tahvo",
|
||
+ (rev >> 4) & 0x0f, rev & 0x0f);
|
||
+
|
||
+ tahvo_irq_pin = em_asic_config->tahvo_irq_gpio;
|
||
+
|
||
+ if ((ret = gpio_request(tahvo_irq_pin, "TAHVO irq")) < 0) {
|
||
+ printk(KERN_ERR PFX "Unable to reserve IRQ GPIO\n");
|
||
+ return ret;
|
||
+ }
|
||
+
|
||
+ /* Set the pin as input */
|
||
+ gpio_direction_input(tahvo_irq_pin);
|
||
+
|
||
+ /* Rising edge triggers the IRQ */
|
||
+ set_irq_type(gpio_to_irq(tahvo_irq_pin), IRQ_TYPE_EDGE_RISING);
|
||
+
|
||
+ /* Mask all TAHVO interrupts */
|
||
+ tahvo_write_reg(TAHVO_REG_IMR, 0xffff);
|
||
+
|
||
+ ret = request_irq(gpio_to_irq(tahvo_irq_pin), tahvo_irq_handler, 0,
|
||
+ "tahvo", 0);
|
||
+ if (ret < 0) {
|
||
+ printk(KERN_ERR PFX "Unable to register IRQ handler\n");
|
||
+ gpio_free(tahvo_irq_pin);
|
||
+ return ret;
|
||
+ }
|
||
+#ifdef CONFIG_CBUS_TAHVO_USER
|
||
+ /* Initialize user-space interface */
|
||
+ if (tahvo_user_init() < 0) {
|
||
+ printk(KERN_ERR "Unable to initialize driver\n");
|
||
+ free_irq(gpio_to_irq(tahvo_irq_pin), 0);
|
||
+ gpio_free(tahvo_irq_pin);
|
||
+ return ret;
|
||
+ }
|
||
+#endif
|
||
+ return 0;
|
||
+}
|
||
+
|
||
+static int tahvo_remove(struct device *dev)
|
||
+{
|
||
+#ifdef CONFIG_CBUS_TAHVO_USER
|
||
+ tahvo_user_cleanup();
|
||
+#endif
|
||
+ /* Mask all TAHVO interrupts */
|
||
+ tahvo_write_reg(TAHVO_REG_IMR, 0xffff);
|
||
+ free_irq(gpio_to_irq(tahvo_irq_pin), 0);
|
||
+ gpio_free(tahvo_irq_pin);
|
||
+ tasklet_kill(&tahvo_tasklet);
|
||
+
|
||
+ return 0;
|
||
+}
|
||
+
|
||
+static void tahvo_device_release(struct device *dev)
|
||
+{
|
||
+ complete(&device_release);
|
||
+}
|
||
+
|
||
+static struct device_driver tahvo_driver = {
|
||
+ .name = "tahvo",
|
||
+ .bus = &platform_bus_type,
|
||
+ .probe = tahvo_probe,
|
||
+ .remove = tahvo_remove,
|
||
+};
|
||
+
|
||
+static struct platform_device tahvo_device = {
|
||
+ .name = "tahvo",
|
||
+ .id = -1,
|
||
+ .dev = {
|
||
+ .release = tahvo_device_release,
|
||
+ }
|
||
+};
|
||
+
|
||
+/**
|
||
+ * tahvo_init - initialise Tahvo driver
|
||
+ *
|
||
+ * Initialise the Tahvo driver and return 0 if everything worked ok
|
||
+ */
|
||
+static int __init tahvo_init(void)
|
||
+{
|
||
+ int ret = 0;
|
||
+
|
||
+ printk(KERN_INFO "Tahvo/Betty driver initialising\n");
|
||
+
|
||
+ init_completion(&device_release);
|
||
+
|
||
+ if ((ret = driver_register(&tahvo_driver)) < 0)
|
||
+ return ret;
|
||
+
|
||
+ if ((ret = platform_device_register(&tahvo_device)) < 0) {
|
||
+ driver_unregister(&tahvo_driver);
|
||
+ return ret;
|
||
+ }
|
||
+ return 0;
|
||
+}
|
||
+
|
||
+/*
|
||
+ * Cleanup
|
||
+ */
|
||
+static void __exit tahvo_exit(void)
|
||
+{
|
||
+ platform_device_unregister(&tahvo_device);
|
||
+ driver_unregister(&tahvo_driver);
|
||
+ wait_for_completion(&device_release);
|
||
+}
|
||
+
|
||
+EXPORT_SYMBOL(tahvo_request_irq);
|
||
+EXPORT_SYMBOL(tahvo_free_irq);
|
||
+EXPORT_SYMBOL(tahvo_enable_irq);
|
||
+EXPORT_SYMBOL(tahvo_disable_irq);
|
||
+EXPORT_SYMBOL(tahvo_ack_irq);
|
||
+EXPORT_SYMBOL(tahvo_read_reg);
|
||
+EXPORT_SYMBOL(tahvo_write_reg);
|
||
+EXPORT_SYMBOL(tahvo_get_backlight_level);
|
||
+EXPORT_SYMBOL(tahvo_get_max_backlight_level);
|
||
+EXPORT_SYMBOL(tahvo_set_backlight_level);
|
||
+
|
||
+subsys_initcall(tahvo_init);
|
||
+module_exit(tahvo_exit);
|
||
+
|
||
+MODULE_DESCRIPTION("Tahvo ASIC control");
|
||
+MODULE_LICENSE("GPL");
|
||
+MODULE_AUTHOR("Juha Yrj<72>l<EFBFBD>, David Weinehall, and Mikko Ylinen");
|
||
diff --git a/drivers/cbus/tahvo.h b/drivers/cbus/tahvo.h
|
||
new file mode 100644
|
||
index 0000000..b7a8ee1
|
||
--- /dev/null
|
||
+++ b/drivers/cbus/tahvo.h
|
||
@@ -0,0 +1,61 @@
|
||
+/*
|
||
+ * drivers/cbus/tahvo.h
|
||
+ *
|
||
+ * Copyright (C) 2004, 2005 Nokia Corporation
|
||
+ *
|
||
+ * Written by Juha Yrj<72>l<EFBFBD> <juha.yrjola@nokia.com> and
|
||
+ * David Weinehall <david.weinehall@nokia.com>
|
||
+ *
|
||
+ * This file is subject to the terms and conditions of the GNU General
|
||
+ * Public License. See the file "COPYING" in the main directory of this
|
||
+ * archive for more details.
|
||
+ *
|
||
+ * This program is distributed in the hope that it will be useful,
|
||
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
+ * GNU General Public License for more details.
|
||
+
|
||
+ * You should have received a copy of the GNU General Public License
|
||
+ * along with this program; if not, write to the Free Software
|
||
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||
+ */
|
||
+
|
||
+#ifndef __DRIVERS_CBUS_TAHVO_H
|
||
+#define __DRIVERS_CBUS_TAHVO_H
|
||
+
|
||
+#include <linux/types.h>
|
||
+
|
||
+/* Registers */
|
||
+#define TAHVO_REG_ASICR 0x00 /* ASIC ID & revision */
|
||
+#define TAHVO_REG_IDR 0x01 /* Interrupt ID */
|
||
+#define TAHVO_REG_IDSR 0x02 /* Interrupt status */
|
||
+#define TAHVO_REG_IMR 0x03 /* Interrupt mask */
|
||
+#define TAHVO_REG_LEDPWMR 0x05 /* LED PWM */
|
||
+#define TAHVO_REG_USBR 0x06 /* USB control */
|
||
+#define TAHVO_REG_MAX 0x0d
|
||
+
|
||
+/* Interrupt sources */
|
||
+#define TAHVO_INT_VBUSON 0
|
||
+
|
||
+#define MAX_TAHVO_IRQ_HANDLERS 8
|
||
+
|
||
+int tahvo_read_reg(int reg);
|
||
+void tahvo_write_reg(int reg, u16 val);
|
||
+void tahvo_set_clear_reg_bits(int reg, u16 set, u16 clear);
|
||
+int tahvo_request_irq(int id, void *irq_handler, unsigned long arg, char *name);
|
||
+void tahvo_free_irq(int id);
|
||
+void tahvo_enable_irq(int id);
|
||
+void tahvo_disable_irq(int id);
|
||
+void tahvo_ack_irq(int id);
|
||
+int tahvo_get_backlight_level(void);
|
||
+int tahvo_get_max_backlight_level(void);
|
||
+void tahvo_set_backlight_level(int level);
|
||
+
|
||
+#ifdef CONFIG_CBUS_TAHVO_USER
|
||
+int tahvo_user_init(void);
|
||
+void tahvo_user_cleanup(void);
|
||
+#endif
|
||
+
|
||
+extern spinlock_t tahvo_lock;
|
||
+
|
||
+#endif /* __DRIVERS_CBUS_TAHVO_H */
|
||
diff --git a/drivers/cbus/user_retu_tahvo.h b/drivers/cbus/user_retu_tahvo.h
|
||
new file mode 100644
|
||
index 0000000..a5c2190
|
||
--- /dev/null
|
||
+++ b/drivers/cbus/user_retu_tahvo.h
|
||
@@ -0,0 +1,75 @@
|
||
+/**
|
||
+ * drivers/cbus/user_retu_tahvo.h
|
||
+ *
|
||
+ * Copyright (C) 2004, 2005 Nokia Corporation
|
||
+ *
|
||
+ * Written by Mikko Ylinen <mikko.k.ylinen@nokia.com>
|
||
+ *
|
||
+ * Definitions and types used by both retu-user and tahvo-user.
|
||
+ *
|
||
+ * This file is subject to the terms and conditions of the GNU General
|
||
+ * Public License. See the file "COPYING" in the main directory of this
|
||
+ * archive for more details.
|
||
+ *
|
||
+ * This program is distributed in the hope that it will be useful,
|
||
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
+ * GNU General Public License for more details.
|
||
+
|
||
+ * You should have received a copy of the GNU General Public License
|
||
+ * along with this program; if not, write to the Free Software
|
||
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||
+ */
|
||
+
|
||
+#ifndef _USER_RETU_TAHVO_H
|
||
+#define _USER_RETU_TAHVO_H
|
||
+
|
||
+/* Chip IDs */
|
||
+#define CHIP_RETU 1
|
||
+#define CHIP_TAHVO 2
|
||
+
|
||
+/* Register access type bits */
|
||
+#define READ_ONLY 1
|
||
+#define WRITE_ONLY 2
|
||
+#define READ_WRITE 3
|
||
+#define TOGGLE 4
|
||
+
|
||
+#define MASK(field) ((u16)(field & 0xFFFF))
|
||
+#define REG(field) ((u16)((field >> 16) & 0x3F))
|
||
+
|
||
+/*** IOCTL definitions. These should be kept in sync with user space **********/
|
||
+
|
||
+#define URT_IOC_MAGIC '`'
|
||
+
|
||
+/*
|
||
+ * IOCTL function naming conventions:
|
||
+ * ==================================
|
||
+ * 0 -- No argument and return value
|
||
+ * S -- Set through a pointer
|
||
+ * T -- Tell directly with the argument value
|
||
+ * G -- Reply by setting through a pointer
|
||
+ * Q -- response is on the return value
|
||
+ * X -- S and G atomically
|
||
+ * H -- T and Q atomically
|
||
+ */
|
||
+
|
||
+/* General */
|
||
+#define URT_IOCT_IRQ_SUBSCR _IO(URT_IOC_MAGIC, 0)
|
||
+
|
||
+/* RETU */
|
||
+#define RETU_IOCH_READ _IO(URT_IOC_MAGIC, 1)
|
||
+#define RETU_IOCX_WRITE _IO(URT_IOC_MAGIC, 2)
|
||
+#define RETU_IOCH_ADC_READ _IO(URT_IOC_MAGIC, 3)
|
||
+
|
||
+/* TAHVO */
|
||
+#define TAHVO_IOCH_READ _IO(URT_IOC_MAGIC, 4)
|
||
+#define TAHVO_IOCX_WRITE _IO(URT_IOC_MAGIC, 5)
|
||
+
|
||
+/* This structure is used for writing RETU/TAHVO registers */
|
||
+struct retu_tahvo_write_parms {
|
||
+ u32 field;
|
||
+ u16 value;
|
||
+ u8 result;
|
||
+};
|
||
+
|
||
+#endif
|
||
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
|
||
index 4487cc0..0aecaae 100644
|
||
--- a/drivers/mmc/host/omap_hsmmc.c
|
||
+++ b/drivers/mmc/host/omap_hsmmc.c
|
||
@@ -2013,7 +2013,7 @@ static struct platform_driver omap_hsmmc_driver = {
|
||
static int __init omap_hsmmc_init(void)
|
||
{
|
||
/* Register the MMC driver */
|
||
- return platform_driver_register(&omap_hsmmc_driver);
|
||
+ return platform_driver_probe(&omap_hsmmc_driver, omap_hsmmc_probe);
|
||
}
|
||
|
||
static void __exit omap_hsmmc_cleanup(void)
|
||
diff --git a/drivers/spi/omap_uwire.c b/drivers/spi/omap_uwire.c
|
||
index e75ba9b..7bcf409 100644
|
||
--- a/drivers/spi/omap_uwire.c
|
||
+++ b/drivers/spi/omap_uwire.c
|
||
@@ -52,7 +52,7 @@
|
||
#include <asm/mach-types.h>
|
||
|
||
#include <mach/mux.h>
|
||
-#include <mach/omap730.h> /* OMAP730_IO_CONF registers */
|
||
+#include <mach/omap7xx.h> /* OMAP7XX_IO_CONF registers */
|
||
|
||
|
||
/* FIXME address is now a platform device resource,
|
||
@@ -504,7 +504,7 @@ static int __init uwire_probe(struct platform_device *pdev)
|
||
}
|
||
clk_enable(uwire->ck);
|
||
|
||
- if (cpu_is_omap730())
|
||
+ if (cpu_is_omap7xx())
|
||
uwire_idx_shift = 1;
|
||
else
|
||
uwire_idx_shift = 2;
|
||
@@ -573,8 +573,8 @@ static int __init omap_uwire_init(void)
|
||
}
|
||
if (machine_is_omap_perseus2()) {
|
||
/* configure pins: MPU_UW_nSCS1, MPU_UW_SDO, MPU_UW_SCLK */
|
||
- int val = omap_readl(OMAP730_IO_CONF_9) & ~0x00EEE000;
|
||
- omap_writel(val | 0x00AAA000, OMAP730_IO_CONF_9);
|
||
+ int val = omap_readl(OMAP7XX_IO_CONF_9) & ~0x00EEE000;
|
||
+ omap_writel(val | 0x00AAA000, OMAP7XX_IO_CONF_9);
|
||
}
|
||
|
||
return platform_driver_probe(&uwire_driver, uwire_probe);
|
||
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
|
||
index 2407508..5620e92 100644
|
||
--- a/drivers/usb/Kconfig
|
||
+++ b/drivers/usb/Kconfig
|
||
@@ -60,6 +60,7 @@ config USB_ARCH_HAS_EHCI
|
||
default y if ARCH_IXP4XX
|
||
default y if ARCH_W90X900
|
||
default y if ARCH_AT91SAM9G45
|
||
+ default y if ARCH_OMAP34XX
|
||
default PCI
|
||
|
||
# ARM SA1111 chips have a non-PCI based "OHCI-compatible" USB host interface.
|
||
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
|
||
index 9835e07..44c208c 100644
|
||
--- a/drivers/usb/host/ehci-hcd.c
|
||
+++ b/drivers/usb/host/ehci-hcd.c
|
||
@@ -1108,6 +1108,11 @@ MODULE_LICENSE ("GPL");
|
||
#define PLATFORM_DRIVER ehci_hcd_au1xxx_driver
|
||
#endif
|
||
|
||
+#ifdef CONFIG_ARCH_OMAP34XX
|
||
+#include "ehci-omap.c"
|
||
+#define PLATFORM_DRIVER ehci_hcd_omap_driver
|
||
+#endif
|
||
+
|
||
#ifdef CONFIG_PPC_PS3
|
||
#include "ehci-ps3.c"
|
||
#define PS3_SYSTEM_BUS_DRIVER ps3_ehci_driver
|
||
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
|
||
new file mode 100644
|
||
index 0000000..7ba8df3
|
||
--- /dev/null
|
||
+++ b/drivers/usb/host/ehci-omap.c
|
||
@@ -0,0 +1,755 @@
|
||
+/*
|
||
+ * ehci-omap.c - driver for USBHOST on OMAP 34xx processor
|
||
+ *
|
||
+ * Bus Glue for OMAP34xx USBHOST 3 port EHCI controller
|
||
+ * Tested on OMAP3430 ES2.0 SDP
|
||
+ *
|
||
+ * Copyright (C) 2007-2008 Texas Instruments, Inc.
|
||
+ * Author: Vikram Pandita <vikram.pandita@ti.com>
|
||
+ *
|
||
+ * Copyright (C) 2009 Nokia Corporation
|
||
+ * Contact: Felipe Balbi <felipe.balbi@nokia.com>
|
||
+ *
|
||
+ * Based on "ehci-fsl.c" and "ehci-au1xxx.c" ehci glue layers
|
||
+ *
|
||
+ * This program is free software; you can redistribute it and/or modify
|
||
+ * it under the terms of the GNU General Public License as published by
|
||
+ * the Free Software Foundation; either version 2 of the License, or
|
||
+ * (at your option) any later version.
|
||
+ *
|
||
+ * This program is distributed in the hope that it will be useful,
|
||
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
+ * GNU General Public License for more details.
|
||
+ *
|
||
+ * You should have received a copy of the GNU General Public License
|
||
+ * along with this program; if not, write to the Free Software
|
||
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||
+ *
|
||
+ * TODO (last updated Feb 23rd, 2009):
|
||
+ * - add kernel-doc
|
||
+ * - enable AUTOIDLE
|
||
+ * - move DPLL5 programming to clock fw
|
||
+ * - add suspend/resume
|
||
+ * - move workarounds to board-files
|
||
+ */
|
||
+
|
||
+#include <linux/platform_device.h>
|
||
+#include <linux/clk.h>
|
||
+#include <linux/gpio.h>
|
||
+#include <mach/usb.h>
|
||
+
|
||
+/*
|
||
+ * OMAP USBHOST Register addresses: VIRTUAL ADDRESSES
|
||
+ * Use ehci_omap_readl()/ehci_omap_writel() functions
|
||
+ */
|
||
+
|
||
+/* TLL Register Set */
|
||
+#define OMAP_USBTLL_REVISION (0x00)
|
||
+#define OMAP_USBTLL_SYSCONFIG (0x10)
|
||
+#define OMAP_USBTLL_SYSCONFIG_CACTIVITY (1 << 8)
|
||
+#define OMAP_USBTLL_SYSCONFIG_SIDLEMODE (1 << 3)
|
||
+#define OMAP_USBTLL_SYSCONFIG_ENAWAKEUP (1 << 2)
|
||
+#define OMAP_USBTLL_SYSCONFIG_SOFTRESET (1 << 1)
|
||
+#define OMAP_USBTLL_SYSCONFIG_AUTOIDLE (1 << 0)
|
||
+
|
||
+#define OMAP_USBTLL_SYSSTATUS (0x14)
|
||
+#define OMAP_USBTLL_SYSSTATUS_RESETDONE (1 << 0)
|
||
+
|
||
+#define OMAP_USBTLL_IRQSTATUS (0x18)
|
||
+#define OMAP_USBTLL_IRQENABLE (0x1C)
|
||
+
|
||
+#define OMAP_TLL_SHARED_CONF (0x30)
|
||
+#define OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN (1 << 6)
|
||
+#define OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN (1 << 5)
|
||
+#define OMAP_TLL_SHARED_CONF_USB_DIVRATION (1 << 2)
|
||
+#define OMAP_TLL_SHARED_CONF_FCLK_REQ (1 << 1)
|
||
+#define OMAP_TLL_SHARED_CONF_FCLK_IS_ON (1 << 0)
|
||
+
|
||
+#define OMAP_TLL_CHANNEL_CONF(num) (0x040 + 0x004 * num)
|
||
+#define OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF (1 << 11)
|
||
+#define OMAP_TLL_CHANNEL_CONF_ULPI_ULPIAUTOIDLE (1 << 10)
|
||
+#define OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE (1 << 9)
|
||
+#define OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE (1 << 8)
|
||
+#define OMAP_TLL_CHANNEL_CONF_CHANEN (1 << 0)
|
||
+
|
||
+#define OMAP_TLL_ULPI_FUNCTION_CTRL(num) (0x804 + 0x100 * num)
|
||
+#define OMAP_TLL_ULPI_INTERFACE_CTRL(num) (0x807 + 0x100 * num)
|
||
+#define OMAP_TLL_ULPI_OTG_CTRL(num) (0x80A + 0x100 * num)
|
||
+#define OMAP_TLL_ULPI_INT_EN_RISE(num) (0x80D + 0x100 * num)
|
||
+#define OMAP_TLL_ULPI_INT_EN_FALL(num) (0x810 + 0x100 * num)
|
||
+#define OMAP_TLL_ULPI_INT_STATUS(num) (0x813 + 0x100 * num)
|
||
+#define OMAP_TLL_ULPI_INT_LATCH(num) (0x814 + 0x100 * num)
|
||
+#define OMAP_TLL_ULPI_DEBUG(num) (0x815 + 0x100 * num)
|
||
+#define OMAP_TLL_ULPI_SCRATCH_REGISTER(num) (0x816 + 0x100 * num)
|
||
+
|
||
+#define OMAP_TLL_CHANNEL_COUNT 3
|
||
+#define OMAP_TLL_CHANNEL_1_EN_MASK (1 << 1)
|
||
+#define OMAP_TLL_CHANNEL_2_EN_MASK (1 << 2)
|
||
+#define OMAP_TLL_CHANNEL_3_EN_MASK (1 << 4)
|
||
+
|
||
+/* UHH Register Set */
|
||
+#define OMAP_UHH_REVISION (0x00)
|
||
+#define OMAP_UHH_SYSCONFIG (0x10)
|
||
+#define OMAP_UHH_SYSCONFIG_MIDLEMODE (1 << 12)
|
||
+#define OMAP_UHH_SYSCONFIG_CACTIVITY (1 << 8)
|
||
+#define OMAP_UHH_SYSCONFIG_SIDLEMODE (1 << 3)
|
||
+#define OMAP_UHH_SYSCONFIG_ENAWAKEUP (1 << 2)
|
||
+#define OMAP_UHH_SYSCONFIG_SOFTRESET (1 << 1)
|
||
+#define OMAP_UHH_SYSCONFIG_AUTOIDLE (1 << 0)
|
||
+
|
||
+#define OMAP_UHH_SYSSTATUS (0x14)
|
||
+#define OMAP_UHH_HOSTCONFIG (0x40)
|
||
+#define OMAP_UHH_HOSTCONFIG_ULPI_BYPASS (1 << 0)
|
||
+#define OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS (1 << 0)
|
||
+#define OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS (1 << 11)
|
||
+#define OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS (1 << 12)
|
||
+#define OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN (1 << 2)
|
||
+#define OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN (1 << 3)
|
||
+#define OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN (1 << 4)
|
||
+#define OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN (1 << 5)
|
||
+#define OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS (1 << 8)
|
||
+#define OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS (1 << 9)
|
||
+#define OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS (1 << 10)
|
||
+
|
||
+#define OMAP_UHH_DEBUG_CSR (0x44)
|
||
+
|
||
+/* EHCI Register Set */
|
||
+#define EHCI_INSNREG05_ULPI (0xA4)
|
||
+#define EHCI_INSNREG05_ULPI_CONTROL_SHIFT 31
|
||
+#define EHCI_INSNREG05_ULPI_PORTSEL_SHIFT 24
|
||
+#define EHCI_INSNREG05_ULPI_OPSEL_SHIFT 22
|
||
+#define EHCI_INSNREG05_ULPI_REGADD_SHIFT 16
|
||
+#define EHCI_INSNREG05_ULPI_EXTREGADD_SHIFT 8
|
||
+#define EHCI_INSNREG05_ULPI_WRDATA_SHIFT 0
|
||
+
|
||
+/*-------------------------------------------------------------------------*/
|
||
+
|
||
+static inline void ehci_omap_writel(void __iomem *base, u32 reg, u32 val)
|
||
+{
|
||
+ __raw_writel(val, base + reg);
|
||
+}
|
||
+
|
||
+static inline u32 ehci_omap_readl(void __iomem *base, u32 reg)
|
||
+{
|
||
+ return __raw_readl(base + reg);
|
||
+}
|
||
+
|
||
+static inline void ehci_omap_writeb(void __iomem *base, u8 reg, u8 val)
|
||
+{
|
||
+ __raw_writeb(val, base + reg);
|
||
+}
|
||
+
|
||
+static inline u8 ehci_omap_readb(void __iomem *base, u8 reg)
|
||
+{
|
||
+ return __raw_readb(base + reg);
|
||
+}
|
||
+
|
||
+/*-------------------------------------------------------------------------*/
|
||
+
|
||
+struct ehci_hcd_omap {
|
||
+ struct ehci_hcd *ehci;
|
||
+ struct device *dev;
|
||
+
|
||
+ struct clk *usbhost_ick;
|
||
+ struct clk *usbhost2_120m_fck;
|
||
+ struct clk *usbhost1_48m_fck;
|
||
+ struct clk *usbtll_fck;
|
||
+ struct clk *usbtll_ick;
|
||
+
|
||
+ /* FIXME the following two workarounds are
|
||
+ * board specific not silicon-specific so these
|
||
+ * should be moved to board-file instead.
|
||
+ *
|
||
+ * Maybe someone from TI will know better which
|
||
+ * board is affected and needs the workarounds
|
||
+ * to be applied
|
||
+ */
|
||
+
|
||
+ /* gpio for resetting phy */
|
||
+ int reset_gpio_port[OMAP3_HS_USB_PORTS];
|
||
+
|
||
+ /* phy reset workaround */
|
||
+ int phy_reset;
|
||
+
|
||
+ /* desired phy_mode: TLL, PHY */
|
||
+ enum ehci_hcd_omap_mode port_mode[OMAP3_HS_USB_PORTS];
|
||
+
|
||
+ void __iomem *uhh_base;
|
||
+ void __iomem *tll_base;
|
||
+ void __iomem *ehci_base;
|
||
+};
|
||
+
|
||
+/*-------------------------------------------------------------------------*/
|
||
+
|
||
+static void omap_usb_utmi_init(struct ehci_hcd_omap *omap, u8 tll_channel_mask)
|
||
+{
|
||
+ unsigned reg;
|
||
+ int i;
|
||
+
|
||
+ /* Program the 3 TLL channels upfront */
|
||
+ for (i = 0; i < OMAP_TLL_CHANNEL_COUNT; i++) {
|
||
+ reg = ehci_omap_readl(omap->tll_base, OMAP_TLL_CHANNEL_CONF(i));
|
||
+
|
||
+ /* Disable AutoIdle, BitStuffing and use SDR Mode */
|
||
+ reg &= ~(OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE
|
||
+ | OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF
|
||
+ | OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE);
|
||
+ ehci_omap_writel(omap->tll_base, OMAP_TLL_CHANNEL_CONF(i), reg);
|
||
+ }
|
||
+
|
||
+ /* Program Common TLL register */
|
||
+ reg = ehci_omap_readl(omap->tll_base, OMAP_TLL_SHARED_CONF);
|
||
+ reg |= (OMAP_TLL_SHARED_CONF_FCLK_IS_ON
|
||
+ | OMAP_TLL_SHARED_CONF_USB_DIVRATION
|
||
+ | OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN);
|
||
+ reg &= ~OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN;
|
||
+
|
||
+ ehci_omap_writel(omap->tll_base, OMAP_TLL_SHARED_CONF, reg);
|
||
+
|
||
+ /* Enable channels now */
|
||
+ for (i = 0; i < OMAP_TLL_CHANNEL_COUNT; i++) {
|
||
+ reg = ehci_omap_readl(omap->tll_base, OMAP_TLL_CHANNEL_CONF(i));
|
||
+
|
||
+ /* Enable only the reg that is needed */
|
||
+ if (!(tll_channel_mask & 1<<i))
|
||
+ continue;
|
||
+
|
||
+ reg |= OMAP_TLL_CHANNEL_CONF_CHANEN;
|
||
+ ehci_omap_writel(omap->tll_base, OMAP_TLL_CHANNEL_CONF(i), reg);
|
||
+
|
||
+ ehci_omap_writeb(omap->tll_base,
|
||
+ OMAP_TLL_ULPI_SCRATCH_REGISTER(i), 0xbe);
|
||
+ dev_dbg(omap->dev, "ULPI_SCRATCH_REG[ch=%d]= 0x%02x\n",
|
||
+ i+1, ehci_omap_readb(omap->tll_base,
|
||
+ OMAP_TLL_ULPI_SCRATCH_REGISTER(i)));
|
||
+ }
|
||
+}
|
||
+
|
||
+/*-------------------------------------------------------------------------*/
|
||
+
|
||
+/* omap_start_ehc
|
||
+ * - Start the TI USBHOST controller
|
||
+ */
|
||
+static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
|
||
+{
|
||
+ unsigned long timeout = jiffies + msecs_to_jiffies(1000);
|
||
+ u8 tll_ch_mask = 0;
|
||
+ unsigned reg = 0;
|
||
+ int ret = 0;
|
||
+
|
||
+ dev_dbg(omap->dev, "starting TI EHCI USB Controller\n");
|
||
+
|
||
+ /* Enable Clocks for USBHOST */
|
||
+ omap->usbhost_ick = clk_get(omap->dev, "usbhost_ick");
|
||
+ if (IS_ERR(omap->usbhost_ick)) {
|
||
+ ret = PTR_ERR(omap->usbhost_ick);
|
||
+ goto err_host_ick;
|
||
+ }
|
||
+ clk_enable(omap->usbhost_ick);
|
||
+
|
||
+ omap->usbhost2_120m_fck = clk_get(omap->dev, "usbhost_120m_fck");
|
||
+ if (IS_ERR(omap->usbhost2_120m_fck)) {
|
||
+ ret = PTR_ERR(omap->usbhost2_120m_fck);
|
||
+ goto err_host_120m_fck;
|
||
+ }
|
||
+ clk_enable(omap->usbhost2_120m_fck);
|
||
+
|
||
+ omap->usbhost1_48m_fck = clk_get(omap->dev, "usbhost_48m_fck");
|
||
+ if (IS_ERR(omap->usbhost1_48m_fck)) {
|
||
+ ret = PTR_ERR(omap->usbhost1_48m_fck);
|
||
+ goto err_host_48m_fck;
|
||
+ }
|
||
+ clk_enable(omap->usbhost1_48m_fck);
|
||
+
|
||
+ if (omap->phy_reset) {
|
||
+ /* Refer: ISSUE1 */
|
||
+ if (gpio_is_valid(omap->reset_gpio_port[0])) {
|
||
+ gpio_request(omap->reset_gpio_port[0],
|
||
+ "USB1 PHY reset");
|
||
+ gpio_direction_output(omap->reset_gpio_port[0], 0);
|
||
+ }
|
||
+
|
||
+ if (gpio_is_valid(omap->reset_gpio_port[1])) {
|
||
+ gpio_request(omap->reset_gpio_port[1],
|
||
+ "USB2 PHY reset");
|
||
+ gpio_direction_output(omap->reset_gpio_port[1], 0);
|
||
+ }
|
||
+
|
||
+ /* Hold the PHY in RESET for enough time till DIR is high */
|
||
+ udelay(10);
|
||
+ }
|
||
+
|
||
+ /* Configure TLL for 60Mhz clk for ULPI */
|
||
+ omap->usbtll_fck = clk_get(omap->dev, "usbtll_fck");
|
||
+ if (IS_ERR(omap->usbtll_fck)) {
|
||
+ ret = PTR_ERR(omap->usbtll_fck);
|
||
+ goto err_tll_fck;
|
||
+ }
|
||
+ clk_enable(omap->usbtll_fck);
|
||
+
|
||
+ omap->usbtll_ick = clk_get(omap->dev, "usbtll_ick");
|
||
+ if (IS_ERR(omap->usbtll_ick)) {
|
||
+ ret = PTR_ERR(omap->usbtll_ick);
|
||
+ goto err_tll_ick;
|
||
+ }
|
||
+ clk_enable(omap->usbtll_ick);
|
||
+
|
||
+ /* perform TLL soft reset, and wait until reset is complete */
|
||
+ ehci_omap_writel(omap->tll_base, OMAP_USBTLL_SYSCONFIG,
|
||
+ OMAP_USBTLL_SYSCONFIG_SOFTRESET);
|
||
+
|
||
+ /* Wait for TLL reset to complete */
|
||
+ while (!(ehci_omap_readl(omap->tll_base, OMAP_USBTLL_SYSSTATUS)
|
||
+ & OMAP_USBTLL_SYSSTATUS_RESETDONE)) {
|
||
+ cpu_relax();
|
||
+
|
||
+ if (time_after(jiffies, timeout)) {
|
||
+ dev_dbg(omap->dev, "operation timed out\n");
|
||
+ ret = -EINVAL;
|
||
+ goto err_sys_status;
|
||
+ }
|
||
+ }
|
||
+
|
||
+ dev_dbg(omap->dev, "TLL RESET DONE\n");
|
||
+
|
||
+ /* (1<<3) = no idle mode only for initial debugging */
|
||
+ ehci_omap_writel(omap->tll_base, OMAP_USBTLL_SYSCONFIG,
|
||
+ OMAP_USBTLL_SYSCONFIG_ENAWAKEUP |
|
||
+ OMAP_USBTLL_SYSCONFIG_SIDLEMODE |
|
||
+ OMAP_USBTLL_SYSCONFIG_CACTIVITY);
|
||
+
|
||
+
|
||
+ /* Put UHH in NoIdle/NoStandby mode */
|
||
+ reg = ehci_omap_readl(omap->uhh_base, OMAP_UHH_SYSCONFIG);
|
||
+ reg |= (OMAP_UHH_SYSCONFIG_ENAWAKEUP
|
||
+ | OMAP_UHH_SYSCONFIG_SIDLEMODE
|
||
+ | OMAP_UHH_SYSCONFIG_CACTIVITY
|
||
+ | OMAP_UHH_SYSCONFIG_MIDLEMODE);
|
||
+ reg &= ~OMAP_UHH_SYSCONFIG_AUTOIDLE;
|
||
+
|
||
+ ehci_omap_writel(omap->uhh_base, OMAP_UHH_SYSCONFIG, reg);
|
||
+
|
||
+ reg = ehci_omap_readl(omap->uhh_base, OMAP_UHH_HOSTCONFIG);
|
||
+
|
||
+ /* setup ULPI bypass and burst configurations */
|
||
+ reg |= (OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN
|
||
+ | OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN
|
||
+ | OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN);
|
||
+ reg &= ~OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN;
|
||
+
|
||
+ if (omap->port_mode[0] == EHCI_HCD_OMAP_MODE_UNKNOWN)
|
||
+ reg &= ~OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS;
|
||
+ if (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_UNKNOWN)
|
||
+ reg &= ~OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS;
|
||
+ if (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_UNKNOWN)
|
||
+ reg &= ~OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS;
|
||
+
|
||
+ /* Bypass the TLL module for PHY mode operation */
|
||
+ if (omap_rev() <= OMAP3430_REV_ES2_1) {
|
||
+ dev_dbg(omap->dev, "OMAP3 ES version <= ES2.1 \n");
|
||
+ if ((omap->port_mode[0] == EHCI_HCD_OMAP_MODE_PHY) ||
|
||
+ (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_PHY) ||
|
||
+ (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_PHY))
|
||
+ reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
|
||
+ else
|
||
+ reg |= OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
|
||
+ } else {
|
||
+ dev_dbg(omap->dev, "OMAP3 ES version > ES2.1\n");
|
||
+ if (omap->port_mode[0] == EHCI_HCD_OMAP_MODE_PHY)
|
||
+ reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
|
||
+ else if (omap->port_mode[0] == EHCI_HCD_OMAP_MODE_TLL)
|
||
+ reg |= OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
|
||
+
|
||
+ if (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_PHY)
|
||
+ reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS;
|
||
+ else if (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_TLL)
|
||
+ reg |= OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS;
|
||
+
|
||
+ if (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_PHY)
|
||
+ reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS;
|
||
+ else if (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_TLL)
|
||
+ reg |= OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS;
|
||
+
|
||
+ }
|
||
+ ehci_omap_writel(omap->uhh_base, OMAP_UHH_HOSTCONFIG, reg);
|
||
+ dev_dbg(omap->dev, "UHH setup done, uhh_hostconfig=%x\n", reg);
|
||
+
|
||
+
|
||
+ if ((omap->port_mode[0] == EHCI_HCD_OMAP_MODE_TLL) ||
|
||
+ (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_TLL) ||
|
||
+ (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_TLL)) {
|
||
+
|
||
+ if (omap->port_mode[0] == EHCI_HCD_OMAP_MODE_TLL)
|
||
+ tll_ch_mask |= OMAP_TLL_CHANNEL_1_EN_MASK;
|
||
+ if (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_TLL)
|
||
+ tll_ch_mask |= OMAP_TLL_CHANNEL_2_EN_MASK;
|
||
+ if (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_TLL)
|
||
+ tll_ch_mask |= OMAP_TLL_CHANNEL_3_EN_MASK;
|
||
+
|
||
+ /* Enable UTMI mode for required TLL channels */
|
||
+ omap_usb_utmi_init(omap, tll_ch_mask);
|
||
+ }
|
||
+
|
||
+ if (omap->phy_reset) {
|
||
+ /* Refer ISSUE1:
|
||
+ * Hold the PHY in RESET for enough time till
|
||
+ * PHY is settled and ready
|
||
+ */
|
||
+ udelay(10);
|
||
+
|
||
+ if (gpio_is_valid(omap->reset_gpio_port[0]))
|
||
+ gpio_set_value(omap->reset_gpio_port[0], 1);
|
||
+
|
||
+ if (gpio_is_valid(omap->reset_gpio_port[1]))
|
||
+ gpio_set_value(omap->reset_gpio_port[1], 1);
|
||
+ }
|
||
+
|
||
+ return 0;
|
||
+
|
||
+err_sys_status:
|
||
+ clk_disable(omap->usbtll_ick);
|
||
+ clk_put(omap->usbtll_ick);
|
||
+
|
||
+err_tll_ick:
|
||
+ clk_disable(omap->usbtll_fck);
|
||
+ clk_put(omap->usbtll_fck);
|
||
+
|
||
+err_tll_fck:
|
||
+ clk_disable(omap->usbhost1_48m_fck);
|
||
+ clk_put(omap->usbhost1_48m_fck);
|
||
+
|
||
+ if (omap->phy_reset) {
|
||
+ if (gpio_is_valid(omap->reset_gpio_port[0]))
|
||
+ gpio_free(omap->reset_gpio_port[0]);
|
||
+
|
||
+ if (gpio_is_valid(omap->reset_gpio_port[1]))
|
||
+ gpio_free(omap->reset_gpio_port[1]);
|
||
+ }
|
||
+
|
||
+err_host_48m_fck:
|
||
+ clk_disable(omap->usbhost2_120m_fck);
|
||
+ clk_put(omap->usbhost2_120m_fck);
|
||
+
|
||
+err_host_120m_fck:
|
||
+ clk_disable(omap->usbhost_ick);
|
||
+ clk_put(omap->usbhost_ick);
|
||
+
|
||
+err_host_ick:
|
||
+ return ret;
|
||
+}
|
||
+
|
||
+static void omap_stop_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
|
||
+{
|
||
+ unsigned long timeout = jiffies + msecs_to_jiffies(100);
|
||
+
|
||
+ dev_dbg(omap->dev, "stopping TI EHCI USB Controller\n");
|
||
+
|
||
+ /* Reset OMAP modules for insmod/rmmod to work */
|
||
+ ehci_omap_writel(omap->uhh_base, OMAP_UHH_SYSCONFIG,
|
||
+ OMAP_UHH_SYSCONFIG_SOFTRESET);
|
||
+ while (!(ehci_omap_readl(omap->uhh_base, OMAP_UHH_SYSSTATUS)
|
||
+ & (1 << 0))) {
|
||
+ cpu_relax();
|
||
+
|
||
+ if (time_after(jiffies, timeout))
|
||
+ dev_dbg(omap->dev, "operation timed out\n");
|
||
+ }
|
||
+
|
||
+ while (!(ehci_omap_readl(omap->uhh_base, OMAP_UHH_SYSSTATUS)
|
||
+ & (1 << 1))) {
|
||
+ cpu_relax();
|
||
+
|
||
+ if (time_after(jiffies, timeout))
|
||
+ dev_dbg(omap->dev, "operation timed out\n");
|
||
+ }
|
||
+
|
||
+ while (!(ehci_omap_readl(omap->uhh_base, OMAP_UHH_SYSSTATUS)
|
||
+ & (1 << 2))) {
|
||
+ cpu_relax();
|
||
+
|
||
+ if (time_after(jiffies, timeout))
|
||
+ dev_dbg(omap->dev, "operation timed out\n");
|
||
+ }
|
||
+
|
||
+ ehci_omap_writel(omap->tll_base, OMAP_USBTLL_SYSCONFIG, (1 << 1));
|
||
+
|
||
+ while (!(ehci_omap_readl(omap->tll_base, OMAP_USBTLL_SYSSTATUS)
|
||
+ & (1 << 0))) {
|
||
+ cpu_relax();
|
||
+
|
||
+ if (time_after(jiffies, timeout))
|
||
+ dev_dbg(omap->dev, "operation timed out\n");
|
||
+ }
|
||
+
|
||
+ if (omap->usbtll_fck != NULL) {
|
||
+ clk_disable(omap->usbtll_fck);
|
||
+ clk_put(omap->usbtll_fck);
|
||
+ omap->usbtll_fck = NULL;
|
||
+ }
|
||
+
|
||
+ if (omap->usbhost_ick != NULL) {
|
||
+ clk_disable(omap->usbhost_ick);
|
||
+ clk_put(omap->usbhost_ick);
|
||
+ omap->usbhost_ick = NULL;
|
||
+ }
|
||
+
|
||
+ if (omap->usbhost1_48m_fck != NULL) {
|
||
+ clk_disable(omap->usbhost1_48m_fck);
|
||
+ clk_put(omap->usbhost1_48m_fck);
|
||
+ omap->usbhost1_48m_fck = NULL;
|
||
+ }
|
||
+
|
||
+ if (omap->usbhost2_120m_fck != NULL) {
|
||
+ clk_disable(omap->usbhost2_120m_fck);
|
||
+ clk_put(omap->usbhost2_120m_fck);
|
||
+ omap->usbhost2_120m_fck = NULL;
|
||
+ }
|
||
+
|
||
+ if (omap->usbtll_ick != NULL) {
|
||
+ clk_disable(omap->usbtll_ick);
|
||
+ clk_put(omap->usbtll_ick);
|
||
+ omap->usbtll_ick = NULL;
|
||
+ }
|
||
+
|
||
+ if (omap->phy_reset) {
|
||
+ if (gpio_is_valid(omap->reset_gpio_port[0]))
|
||
+ gpio_free(omap->reset_gpio_port[0]);
|
||
+
|
||
+ if (gpio_is_valid(omap->reset_gpio_port[1]))
|
||
+ gpio_free(omap->reset_gpio_port[1]);
|
||
+ }
|
||
+
|
||
+ dev_dbg(omap->dev, "Clock to USB host has been disabled\n");
|
||
+}
|
||
+
|
||
+/*-------------------------------------------------------------------------*/
|
||
+
|
||
+static const struct hc_driver ehci_omap_hc_driver;
|
||
+
|
||
+/* configure so an HC device and id are always provided */
|
||
+/* always called with process context; sleeping is OK */
|
||
+
|
||
+/**
|
||
+ * ehci_hcd_omap_probe - initialize TI-based HCDs
|
||
+ *
|
||
+ * Allocates basic resources for this USB host controller, and
|
||
+ * then invokes the start() method for the HCD associated with it
|
||
+ * through the hotplug entry's driver_data.
|
||
+ */
|
||
+static int ehci_hcd_omap_probe(struct platform_device *pdev)
|
||
+{
|
||
+ struct ehci_hcd_omap_platform_data *pdata = pdev->dev.platform_data;
|
||
+ struct ehci_hcd_omap *omap;
|
||
+ struct resource *res;
|
||
+ struct usb_hcd *hcd;
|
||
+
|
||
+ int irq = platform_get_irq(pdev, 0);
|
||
+ int ret = -ENODEV;
|
||
+
|
||
+ if (!pdata) {
|
||
+ dev_dbg(&pdev->dev, "missing platform_data\n");
|
||
+ goto err_pdata;
|
||
+ }
|
||
+
|
||
+ if (usb_disabled())
|
||
+ goto err_disabled;
|
||
+
|
||
+ omap = kzalloc(sizeof(*omap), GFP_KERNEL);
|
||
+ if (!omap) {
|
||
+ ret = -ENOMEM;
|
||
+ goto err_create_hcd;
|
||
+ }
|
||
+
|
||
+ hcd = usb_create_hcd(&ehci_omap_hc_driver, &pdev->dev,
|
||
+ dev_name(&pdev->dev));
|
||
+ if (!hcd) {
|
||
+ dev_dbg(&pdev->dev, "failed to create hcd with err %d\n", ret);
|
||
+ ret = -ENOMEM;
|
||
+ goto err_create_hcd;
|
||
+ }
|
||
+
|
||
+ platform_set_drvdata(pdev, omap);
|
||
+ omap->dev = &pdev->dev;
|
||
+ omap->phy_reset = pdata->phy_reset;
|
||
+ omap->reset_gpio_port[0] = pdata->reset_gpio_port[0];
|
||
+ omap->reset_gpio_port[1] = pdata->reset_gpio_port[1];
|
||
+ omap->reset_gpio_port[2] = pdata->reset_gpio_port[2];
|
||
+ omap->port_mode[0] = pdata->port_mode[0];
|
||
+ omap->port_mode[1] = pdata->port_mode[1];
|
||
+ omap->port_mode[2] = pdata->port_mode[2];
|
||
+ omap->ehci = hcd_to_ehci(hcd);
|
||
+ omap->ehci->sbrn = 0x20;
|
||
+
|
||
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||
+
|
||
+ hcd->rsrc_start = res->start;
|
||
+ hcd->rsrc_len = resource_size(res);
|
||
+
|
||
+ hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
|
||
+ if (!hcd->regs) {
|
||
+ dev_err(&pdev->dev, "EHCI ioremap failed\n");
|
||
+ ret = -ENOMEM;
|
||
+ goto err_ioremap;
|
||
+ }
|
||
+
|
||
+ /* we know this is the memory we want, no need to ioremap again */
|
||
+ omap->ehci->caps = hcd->regs;
|
||
+ omap->ehci_base = hcd->regs;
|
||
+
|
||
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
|
||
+ omap->uhh_base = ioremap(res->start, resource_size(res));
|
||
+ if (!omap->uhh_base) {
|
||
+ dev_err(&pdev->dev, "UHH ioremap failed\n");
|
||
+ ret = -ENOMEM;
|
||
+ goto err_uhh_ioremap;
|
||
+ }
|
||
+
|
||
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
|
||
+ omap->tll_base = ioremap(res->start, resource_size(res));
|
||
+ if (!omap->tll_base) {
|
||
+ dev_err(&pdev->dev, "TLL ioremap failed\n");
|
||
+ ret = -ENOMEM;
|
||
+ goto err_tll_ioremap;
|
||
+ }
|
||
+
|
||
+ ret = omap_start_ehc(omap, hcd);
|
||
+ if (ret) {
|
||
+ dev_dbg(&pdev->dev, "failed to start ehci\n");
|
||
+ goto err_start;
|
||
+ }
|
||
+
|
||
+ omap->ehci->regs = hcd->regs
|
||
+ + HC_LENGTH(readl(&omap->ehci->caps->hc_capbase));
|
||
+
|
||
+ /* cache this readonly data; minimize chip reads */
|
||
+ omap->ehci->hcs_params = readl(&omap->ehci->caps->hcs_params);
|
||
+
|
||
+ /* SET 1 micro-frame Interrupt interval */
|
||
+ writel(readl(&omap->ehci->regs->command) | (1 << 16),
|
||
+ &omap->ehci->regs->command);
|
||
+
|
||
+ ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
|
||
+ if (ret) {
|
||
+ dev_dbg(&pdev->dev, "failed to add hcd with err %d\n", ret);
|
||
+ goto err_add_hcd;
|
||
+ }
|
||
+
|
||
+ return 0;
|
||
+
|
||
+err_add_hcd:
|
||
+ omap_stop_ehc(omap, hcd);
|
||
+
|
||
+err_start:
|
||
+ iounmap(omap->tll_base);
|
||
+
|
||
+err_tll_ioremap:
|
||
+ iounmap(omap->uhh_base);
|
||
+
|
||
+err_uhh_ioremap:
|
||
+ iounmap(hcd->regs);
|
||
+
|
||
+err_ioremap:
|
||
+ usb_put_hcd(hcd);
|
||
+
|
||
+err_create_hcd:
|
||
+err_disabled:
|
||
+err_pdata:
|
||
+ return ret;
|
||
+}
|
||
+
|
||
+/* may be called without controller electrically present */
|
||
+/* may be called with controller, bus, and devices active */
|
||
+
|
||
+/**
|
||
+ * ehci_hcd_omap_remove - shutdown processing for EHCI HCDs
|
||
+ * @pdev: USB Host Controller being removed
|
||
+ *
|
||
+ * Reverses the effect of usb_ehci_hcd_omap_probe(), first invoking
|
||
+ * the HCD's stop() method. It is always called from a thread
|
||
+ * context, normally "rmmod", "apmd", or something similar.
|
||
+ */
|
||
+static int ehci_hcd_omap_remove(struct platform_device *pdev)
|
||
+{
|
||
+ struct ehci_hcd_omap *omap = platform_get_drvdata(pdev);
|
||
+ struct usb_hcd *hcd = ehci_to_hcd(omap->ehci);
|
||
+
|
||
+ usb_remove_hcd(hcd);
|
||
+ omap_stop_ehc(omap, hcd);
|
||
+ iounmap(hcd->regs);
|
||
+ iounmap(omap->tll_base);
|
||
+ iounmap(omap->uhh_base);
|
||
+ usb_put_hcd(hcd);
|
||
+
|
||
+ return 0;
|
||
+}
|
||
+
|
||
+static void ehci_hcd_omap_shutdown(struct platform_device *pdev)
|
||
+{
|
||
+ struct ehci_hcd_omap *omap = platform_get_drvdata(pdev);
|
||
+ struct usb_hcd *hcd = ehci_to_hcd(omap->ehci);
|
||
+
|
||
+ if (hcd->driver->shutdown)
|
||
+ hcd->driver->shutdown(hcd);
|
||
+}
|
||
+
|
||
+static struct platform_driver ehci_hcd_omap_driver = {
|
||
+ .probe = ehci_hcd_omap_probe,
|
||
+ .remove = ehci_hcd_omap_remove,
|
||
+ .shutdown = ehci_hcd_omap_shutdown,
|
||
+ /*.suspend = ehci_hcd_omap_suspend, */
|
||
+ /*.resume = ehci_hcd_omap_resume, */
|
||
+ .driver = {
|
||
+ .name = "ehci-omap",
|
||
+ }
|
||
+};
|
||
+
|
||
+/*-------------------------------------------------------------------------*/
|
||
+
|
||
+static const struct hc_driver ehci_omap_hc_driver = {
|
||
+ .description = hcd_name,
|
||
+ .product_desc = "OMAP-EHCI Host Controller",
|
||
+ .hcd_priv_size = sizeof(struct ehci_hcd),
|
||
+
|
||
+ /*
|
||
+ * generic hardware linkage
|
||
+ */
|
||
+ .irq = ehci_irq,
|
||
+ .flags = HCD_MEMORY | HCD_USB2,
|
||
+
|
||
+ /*
|
||
+ * basic lifecycle operations
|
||
+ */
|
||
+ .reset = ehci_init,
|
||
+ .start = ehci_run,
|
||
+ .stop = ehci_stop,
|
||
+ .shutdown = ehci_shutdown,
|
||
+
|
||
+ /*
|
||
+ * managing i/o requests and associated device resources
|
||
+ */
|
||
+ .urb_enqueue = ehci_urb_enqueue,
|
||
+ .urb_dequeue = ehci_urb_dequeue,
|
||
+ .endpoint_disable = ehci_endpoint_disable,
|
||
+ .endpoint_reset = ehci_endpoint_reset,
|
||
+
|
||
+ /*
|
||
+ * scheduling support
|
||
+ */
|
||
+ .get_frame_number = ehci_get_frame,
|
||
+
|
||
+ /*
|
||
+ * root hub support
|
||
+ */
|
||
+ .hub_status_data = ehci_hub_status_data,
|
||
+ .hub_control = ehci_hub_control,
|
||
+ .bus_suspend = ehci_bus_suspend,
|
||
+ .bus_resume = ehci_bus_resume,
|
||
+
|
||
+ .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
|
||
+};
|
||
+
|
||
+MODULE_ALIAS("platform:omap-ehci");
|
||
+MODULE_AUTHOR("Texas Instruments, Inc.");
|
||
+MODULE_AUTHOR("Felipe Balbi <felipe.balbi@nokia.com>");
|
||
+
|
||
diff --git a/drivers/video/omap/dispc.c b/drivers/video/omap/dispc.c
|
||
index f16e421..6f957ce 100644
|
||
--- a/drivers/video/omap/dispc.c
|
||
+++ b/drivers/video/omap/dispc.c
|
||
@@ -204,6 +204,7 @@ static u32 inline dispc_read_reg(int idx)
|
||
/* Select RFBI or bypass mode */
|
||
static void enable_rfbi_mode(int enable)
|
||
{
|
||
+ void __iomem *rfbi_control;
|
||
u32 l;
|
||
|
||
l = dispc_read_reg(DISPC_CONTROL);
|
||
@@ -216,9 +217,15 @@ static void enable_rfbi_mode(int enable)
|
||
dispc_write_reg(DISPC_CONTROL, l);
|
||
|
||
/* Set bypass mode in RFBI module */
|
||
- l = __raw_readl(OMAP2_IO_ADDRESS(RFBI_CONTROL));
|
||
+ rfbi_control = ioremap(RFBI_CONTROL, SZ_1K);
|
||
+ if (!rfbi_control) {
|
||
+ pr_err("Unable to ioremap rfbi_control\n");
|
||
+ return;
|
||
+ }
|
||
+ l = __raw_readl(rfbi_control);
|
||
l |= enable ? 0 : (1 << 1);
|
||
- __raw_writel(l, OMAP2_IO_ADDRESS(RFBI_CONTROL));
|
||
+ __raw_writel(l, rfbi_control);
|
||
+ iounmap(rfbi_control);
|
||
}
|
||
|
||
static void set_lcd_data_lines(int data_lines)
|
||
@@ -1367,6 +1374,7 @@ static int omap_dispc_init(struct omapfb_device *fbdev, int ext_mode,
|
||
int r;
|
||
u32 l;
|
||
struct lcd_panel *panel = fbdev->panel;
|
||
+ void __iomem *ram_fw_base;
|
||
int tmo = 10000;
|
||
int skip_init = 0;
|
||
int i;
|
||
@@ -1441,7 +1449,13 @@ static int omap_dispc_init(struct omapfb_device *fbdev, int ext_mode,
|
||
}
|
||
|
||
/* L3 firewall setting: enable access to OCM RAM */
|
||
- __raw_writel(0x402000b0, OMAP2_IO_ADDRESS(0x680050a0));
|
||
+ ram_fw_base = ioremap(0x68005000, SZ_1K);
|
||
+ if (!ram_fw_base) {
|
||
+ dev_err(dispc.fbdev->dev, "Cannot ioremap to enable OCM RAM\n");
|
||
+ goto fail1;
|
||
+ }
|
||
+ __raw_writel(0x402000b0, ram_fw_base + 0xa0);
|
||
+ iounmap(ram_fw_base);
|
||
|
||
if ((r = alloc_palette_ram()) < 0)
|
||
goto fail2;
|