1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-13 02:34:58 +02:00
openwrt-xburst/target/linux/omap35xx/gumstix/base-files/lib/wifi/mac80211.sh
hcg 47e7657ec4 gumstix: Update wifi default settings
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22509 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-06 11:12:36 +00:00

441 lines
11 KiB
Bash

#!/bin/sh
append DRIVERS "mac80211"
mac80211_hostapd_setup_base() {
local phy="$1"
local ifname="$2"
cfgfile="/var/run/hostapd-$phy.conf"
config_get device "$vif" device
config_get country "$device" country
config_get hwmode "$device" hwmode
config_get channel "$device" channel
config_get_bool noscan "$device" noscan
[ -n "$channel" -a -z "$hwmode" ] && wifi_fixup_hwmode "$device"
[ "$channel" = auto ] && channel=
[ -n "$hwmode" ] && {
config_get hwmode_11n "$device" hwmode_11n
[ -n "$hwmode_11n" ] && {
hwmode="$hwmode_11n"
append base_cfg "ieee80211n=1" "$N"
config_get htmode "$device" htmode
config_get ht_capab_list "$device" ht_capab
case "$htmode" in
HT20|HT40+|HT40-) ht_capab="[$htmode]";;
*)ht_capab=;;
esac
for cap in $ht_capab_list; do
ht_capab="$ht_capab[$cap]"
done
[ -n "$ht_capab" ] && append base_cfg "ht_capab=$ht_capab" "$N"
}
}
cat > "$cfgfile" <<EOF
ctrl_interface=/var/run/hostapd-$phy
driver=nl80211
wmm_ac_bk_cwmin=4
wmm_ac_bk_cwmax=10
wmm_ac_bk_aifs=7
wmm_ac_bk_txop_limit=0
wmm_ac_bk_acm=0
wmm_ac_be_aifs=3
wmm_ac_be_cwmin=4
wmm_ac_be_cwmax=10
wmm_ac_be_txop_limit=0
wmm_ac_be_acm=0
wmm_ac_vi_aifs=2
wmm_ac_vi_cwmin=3
wmm_ac_vi_cwmax=4
wmm_ac_vi_txop_limit=94
wmm_ac_vi_acm=0
wmm_ac_vo_aifs=2
wmm_ac_vo_cwmin=2
wmm_ac_vo_cwmax=3
wmm_ac_vo_txop_limit=47
wmm_ac_vo_acm=0
tx_queue_data3_aifs=7
tx_queue_data3_cwmin=15
tx_queue_data3_cwmax=1023
tx_queue_data3_burst=0
tx_queue_data2_aifs=3
tx_queue_data2_cwmin=15
tx_queue_data2_cwmax=63
tx_queue_data2_burst=0
tx_queue_data1_aifs=1
tx_queue_data1_cwmin=7
tx_queue_data1_cwmax=15
tx_queue_data1_burst=3.0
tx_queue_data0_aifs=1
tx_queue_data0_cwmin=3
tx_queue_data0_cwmax=7
tx_queue_data0_burst=1.5
${hwmode:+hw_mode=$hwmode}
${channel:+channel=$channel}
${country:+country_code=$country}
${noscan:+noscan=$noscan}
$base_cfg
EOF
}
mac80211_hostapd_setup_bss() {
local phy="$1"
local vif="$2"
hostapd_cfg=
cfgfile="/var/run/hostapd-$phy.conf"
config_get ifname "$vif" ifname
if [ -f "$cfgfile" ]; then
append hostapd_cfg "bss=$ifname" "$N"
else
mac80211_hostapd_setup_base "$phy" "$ifname"
append hostapd_cfg "interface=$ifname" "$N"
fi
local net_cfg bridge
net_cfg="$(find_net_config "$vif")"
[ -z "$net_cfg" ] || bridge="$(bridge_interface "$net_cfg")"
config_set "$vif" bridge "$bridge"
hostapd_set_bss_options hostapd_cfg "$vif"
config_get_bool wds "$vif" wds 0
[ "$wds" -gt 0 ] && append hostapd_cfg "wds_sta=1" "$N"
config_get macaddr "$vif" macaddr
config_get_bool hidden "$vif" hidden 0
cat >> /var/run/hostapd-$phy.conf <<EOF
$hostapd_cfg
wmm_enabled=1
bssid=$macaddr
ignore_broadcast_ssid=$hidden
EOF
}
mac80211_start_vif() {
local vif="$1"
local ifname="$2"
local net_cfg
net_cfg="$(find_net_config "$vif")"
[ -z "$net_cfg" ] || start_net "$ifname" "$net_cfg"
set_wifi_up "$vif" "$ifname"
}
find_mac80211_phy() {
local device="$1"
local macaddr="$(config_get "$device" macaddr | tr 'A-Z' 'a-z')"
config_get phy "$device" phy
[ -z "$phy" -a -n "$macaddr" ] && {
for phy in $(ls /sys/class/ieee80211 2>/dev/null); do
[ "$macaddr" = "$(cat /sys/class/ieee80211/${phy}/macaddress)" ] || continue
config_set "$device" phy "$phy"
break
done
config_get phy "$device" phy
}
[ -n "$phy" -a -d "/sys/class/ieee80211/$phy" ] || {
echo "PHY for wifi device $1 not found"
return 1
}
[ -z "$macaddr" ] && {
config_set "$device" macaddr "$(cat /sys/class/ieee80211/${phy}/macaddress)"
}
return 0
}
scan_mac80211() {
local device="$1"
local adhoc sta ap monitor mesh
config_get vifs "$device" vifs
for vif in $vifs; do
config_get mode "$vif" mode
case "$mode" in
adhoc|sta|ap|monitor|mesh)
append $mode "$vif"
;;
*) echo "$device($vif): Invalid mode, ignored."; continue;;
esac
done
config_set "$device" vifs "${ap:+$ap }${adhoc:+$adhoc }${sta:+$sta }${monitor:+$monitor }${mesh:+$mesh}"
}
disable_mac80211() (
local device="$1"
find_mac80211_phy "$device" || return 0
config_get phy "$device" phy
set_wifi_down "$device"
# kill all running hostapd and wpa_supplicant processes that
# are running on atheros/mac80211 vifs
for pid in `pidof hostapd`; do
grep -E "$phy" /proc/$pid/cmdline >/dev/null && \
kill $pid
done
include /lib/network
for wdev in $(ls /sys/class/ieee80211/${phy}/device/net 2>/dev/null); do
[ -f "/var/run/$wdev.pid" ] && kill $(cat /var/run/$wdev.pid) >&/dev/null 2>&1
for pid in `pidof wpa_supplicant`; do
grep "$wdev" /proc/$pid/cmdline >/dev/null && \
kill $pid
done
ifconfig "$wdev" down 2>/dev/null
unbridge "$dev"
iw dev "$wdev" del
done
return 0
)
get_freq() {
local phy="$1"
local chan="$2"
iw "$phy" info | grep -E -m1 "(\* ${chan:-....} MHz${chan:+|\\[$chan\\]})" | grep MHz | awk '{print $2}'
}
enable_mac80211() {
local device="$1"
config_get channel "$device" channel
config_get vifs "$device" vifs
config_get txpower "$device" txpower
config_get country "$device" country
config_get distance "$device" distance
find_mac80211_phy "$device" || return 0
config_get phy "$device" phy
local i=0
local macidx=0
local apidx=0
fixed=""
[ -n "$country" ] && iw reg set "$country"
[ "$channel" = "auto" -o "$channel" = "0" ] || {
fixed=1
}
[ -n "$distance" ] && iw phy "$phy" set distance "$distance"
export channel fixed
# convert channel to frequency
local freq="$(get_freq "$phy" "${fixed:+$channel}")"
wifi_fixup_hwmode "$device" "g"
for vif in $vifs; do
while [ -d "/sys/class/net/wlan$i" ]; do
i=$(($i + 1))
done
config_get ifname "$device" ifname
[ -n "$ifname" ] || {
ifname="wlan0"
}
config_set "$vif" ifname "$ifname"
config_get mode "$vif" mode
config_get ssid "$vif" ssid
# It is far easier to delete and create the desired interface
case "$mode" in
adhoc)
iw phy "$phy" interface add "$ifname" type adhoc
;;
ap)
# Hostapd will handle recreating the interface and
# it's accompanying monitor
apidx="$(($apidx + 1))"
i=$(($i + 1))
[ "$apidx" -gt 1 ] || iw phy "$phy" interface add "$ifname" type managed
;;
mesh)
config_get mesh_id "$vif" mesh_id
iw phy "$phy" interface add "$ifname" type mp mesh_id "$mesh_id"
;;
monitor)
iw phy "$phy" interface add "$ifname" type monitor
;;
sta)
local wdsflag
config_get_bool wds "$vif" wds 0
;;
esac
# All interfaces must have unique mac addresses
# which can either be explicitly set in the device
# section, or automatically generated
config_get macaddr "$device" macaddr
local mac_1="${macaddr%%:*}"
local mac_2="${macaddr#*:}"
config_get vif_mac "$vif" macaddr
[ -n "$vif_mac" ] || {
if [ "$macidx" -gt 0 ]; then
offset="$(( 2 + $macidx * 4 ))"
else
offset="0"
fi
vif_mac="$( printf %02x $((0x$mac_1 + $offset)) ):$mac_2"
macidx="$(($macidx + 1))"
}
[ "$mode" = "ap" ] || ifconfig "$ifname" hw ether "$vif_mac"
config_set "$vif" macaddr "$vif_mac"
# !! ap !!
#
# ALL ap functionality will be passed to hostapd
#
# !! station !!
#
# ALL station functionality will be passed to wpa_supplicant
#
#if [ ! "$mode" = "ap" ]; then
# We attempt to set the channel for all interfaces, although
# mac80211 may not support it or the driver might not yet
# for ap mode this is handled by hostapd
# echo "iw dev set channel"
# [ -n "$fixed" -a -n "$channel" ] && iw dev "$ifname" set channel "$channel"
#fi
# txpower is not yet implemented in iw
# config_get vif_txpower "$vif" txpower
# use vif_txpower (from wifi-iface) to override txpower (from
# wifi-device) if the latter doesn't exist
# txpower="${txpower:-$vif_txpower}"
# [ -z "$txpower" ] || iwconfig "$ifname" txpower "${txpower%%.*}"
done
local start_hostapd=
rm -f /var/run/hostapd-$phy.conf
for vif in $vifs; do
config_get mode "$vif" mode
[ "$mode" = "ap" ] || continue
mac80211_hostapd_setup_bss "$phy" "$vif"
start_hostapd=1
done
[ -n "$start_hostapd" ] && {
hostapd -P /var/run/wifi-$phy.pid -B /var/run/hostapd-$phy.conf || {
echo "Failed to start hostapd for $phy"
return
}
sleep 2
for vif in $vifs; do
config_get mode "$vif" mode
config_get ifname "$vif" ifname
[ "$mode" = "ap" ] || continue
mac80211_start_vif "$vif" "$ifname"
done
}
for vif in $vifs; do
config_get mode "$vif" mode
config_get ifname "$vif" ifname
[ ! "$mode" = "ap" ] || continue
ifconfig "$ifname" up
if [ ! "$mode" = "ap" ]; then
ifconfig "$ifname" up
case "$mode" in
adhoc)
config_get bssid "$vif" bssid
config_get ssid "$vif" ssid
iw dev "$ifname" ibss join "$ssid" $freq ${fixed:+fixed-freq} $bssid
;;
sta)
if eval "type wpa_supplicant_setup_vif" 2>/dev/null >/dev/null; then
wpa_supplicant_setup_vif "$vif" mac80211 || {
echo "enable_mac80211($device): Failed to set up wpa_supplicant for interface $ifname" >&2
# make sure this wifi interface won't accidentally stay open without encryption
ifconfig "$ifname" down
continue
}
fi
;;
esac
mac80211_start_vif "$vif" "$ifname"
fi
done
}
check_device() {
config_get phy "$1" phy
[ -z "$phy" ] && {
find_mac80211_phy "$1" >/dev/null || return 0
config_get phy "$1" phy
}
[ "$phy" = "$dev" ] && found=1
}
detect_mac80211() {
devidx=0
config_load wireless
while :; do
config_get type "radio$devidx" type
[ -n "$type" ] || break
devidx=$(($devidx + 1))
done
for dev in $(ls /sys/class/ieee80211); do
found=0
config_foreach check_device wifi-device
[ "$found" -gt 0 ] && continue
mode_11n=""
mode_band="g"
channel="6"
ht_cap=0
for cap in $(iw phy "$dev" info | grep 'Capabilities:' | cut -d: -f2); do
ht_cap="$(($ht_cap | $cap))"
done
ht_capab="";
[ "$ht_cap" -gt 0 ] && {
mode_11n="n"
append ht_capab " option htmode HT20" "$N"
list=" list ht_capab"
[ "$(($ht_cap & 1))" -eq 1 ] && append ht_capab "$list LDPC" "$N"
[ "$(($ht_cap & 32))" -eq 32 ] && append ht_capab "$list SHORT-GI-20" "$N"
[ "$(($ht_cap & 64))" -eq 64 ] && append ht_capab "$list SHORT-GI-40" "$N"
[ "$(($ht_cap & 128))" -eq 128 ] && append ht_capab "$list TX-STBC" "$N"
[ "$(($ht_cap & 768))" -eq 256 ] && append ht_capab "$list RX-STBC1" "$N"
[ "$(($ht_cap & 768))" -eq 512 ] && append ht_capab "$list RX-STBC12" "$N"
[ "$(($ht_cap & 768))" -eq 768 ] && append ht_capab "$list RX-STBC123" "$N"
[ "$(($ht_cap & 4096))" -eq 4096 ] && append ht_capab "$list DSSS_CCK-40" "$N"
}
iw phy "$dev" info | grep -q '2412 MHz' || { mode_band="a"; channel="36"; }
cat <<EOF
config wifi-device radio$devidx
option type mac80211
option channel ${channel}
option macaddr $(cat /sys/class/net/wlan0/address)
option phy phy0
option hwmode 11${mode_11n}${mode_band}
option vifs radio0
option ifname wlan0
$ht_capab
# REMOVE THIS LINE TO ENABLE WIFI:
option disabled 1
config wifi-iface
option device radio$devidx
option network lan
option mode sta
option ssid OpenWrt
option encryption none
EOF
devidx=$(($devidx + 1))
done
}