blogic 0f85365209 The ralink rt305x board has a wireless card that can be used with the rt2800pci driver (it does not work yet but basically should). Hence, register the appropriate platform device to allow developing/testing the rt2800pci driver. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> ...

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20599 3c298f89-4303-0410-b956-a3cf2f4a3e73

2010-03-30 12:04:05 +00:00

..

devices.c

The ralink rt305x board has a wireless card that can be used with the rt2800pci driver (it does not work yet but basically should). Hence, register the appropriate platform device to allow developing/testing the rt2800pci driver. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

2010-03-30 12:04:05 +00:00

devices.h

The ralink rt305x board has a wireless card that can be used with the rt2800pci driver (it does not work yet but basically should). Hence, register the appropriate platform device to allow developing/testing the rt2800pci driver. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

2010-03-30 12:04:05 +00:00

early_printk.c

[ramips] initial support for RT288x/RT305x

2009-08-30 19:15:51 +00:00

irq.c

[ramips] share common INTC code

2009-08-30 19:15:58 +00:00

Kconfig

ramips: register gpio buttons on the Fonera 2.0N board

2010-01-30 15:25:52 +00:00

mach-dir-300-revb.c

ramips: register gpio buttons on the DIR-300 revB board

2010-01-30 15:25:44 +00:00

mach-fonera20n.c

ramips: register gpio buttons on the Fonera 2.0N board

2010-01-30 15:25:52 +00:00

mach-v22rw-2x2.c

ramips: register gpio buttons on the V22RW-2x2 board

2010-01-30 15:25:47 +00:00

mach-whr-g300n.c

ramips: register gpio buttons on the WHR-G300N board

2010-01-30 15:25:49 +00:00

Makefile

[ramips] adds mach type for fonera20n

2009-10-24 20:55:36 +00:00

rt305x.c

[ramips] add GPIO configuration feature

2009-09-04 15:08:26 +00:00

setup.c

[ramips] use common code for early_serial setup

2009-09-02 12:44:17 +00:00