mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-08-20 22:59:18 +03:00
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23888 3c298f89-4303-0410-b956-a3cf2f4a3e73
658 lines
18 KiB
Diff
658 lines
18 KiB
Diff
---
|
|
arch/arm/mach-omap2/board-n8x0.c | 13 +
|
|
drivers/cbus/Kconfig | 12 +
|
|
drivers/cbus/Makefile | 3
|
|
drivers/cbus/lipocharge.c | 63 ++++++
|
|
drivers/cbus/lipocharge.h | 50 ++++
|
|
drivers/cbus/n810bm_main.c | 397 +++++++++++++++++++++++++++++++++++++++
|
|
drivers/cbus/retu.c | 4
|
|
drivers/cbus/retu.h | 3
|
|
drivers/cbus/tahvo.h | 6
|
|
9 files changed, 548 insertions(+), 3 deletions(-)
|
|
|
|
Index: linux-2.6.37-rc1/drivers/cbus/Kconfig
|
|
===================================================================
|
|
--- linux-2.6.37-rc1.orig/drivers/cbus/Kconfig 2010-11-05 17:38:14.843000000 +0100
|
|
+++ linux-2.6.37-rc1/drivers/cbus/Kconfig 2010-11-05 17:38:14.894000001 +0100
|
|
@@ -94,4 +94,16 @@
|
|
to Retu/Vilma. Detection state and events are exposed through
|
|
sysfs.
|
|
|
|
+config N810BM
|
|
+ depends on CBUS_RETU && CBUS_TAHVO
|
|
+ tristate "Nokia n810 battery management"
|
|
+ ---help---
|
|
+ Nokia n810 device battery management.
|
|
+
|
|
+ WARNING: This driver is based on reverse engineered information.
|
|
+ It is possibly dangerous to use this software.
|
|
+ Use this software at your own risk!
|
|
+
|
|
+ If unsure, say N.
|
|
+
|
|
endmenu
|
|
Index: linux-2.6.37-rc1/drivers/cbus/Makefile
|
|
===================================================================
|
|
--- linux-2.6.37-rc1.orig/drivers/cbus/Makefile 2010-11-05 17:38:14.834000050 +0100
|
|
+++ linux-2.6.37-rc1/drivers/cbus/Makefile 2010-11-05 17:38:14.894000001 +0100
|
|
@@ -12,3 +12,6 @@
|
|
obj-$(CONFIG_CBUS_TAHVO_USER) += tahvo-user.o
|
|
obj-$(CONFIG_CBUS_RETU_USER) += retu-user.o
|
|
obj-$(CONFIG_CBUS_RETU_HEADSET) += retu-headset.o
|
|
+n810bm-y += n810bm_main.o
|
|
+n810bm-y += lipocharge.o
|
|
+obj-$(CONFIG_N810BM) += n810bm.o
|
|
Index: linux-2.6.37-rc1/drivers/cbus/n810bm_main.c
|
|
===================================================================
|
|
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
|
|
+++ linux-2.6.37-rc1/drivers/cbus/n810bm_main.c 2010-11-05 17:38:14.894000001 +0100
|
|
@@ -0,0 +1,397 @@
|
|
+/*
|
|
+ * Nokia n810 battery management
|
|
+ *
|
|
+ * WARNING: This driver is based on reverse engineered information.
|
|
+ * It is possibly dangerous to use this software.
|
|
+ * Use this software at your own risk!
|
|
+ *
|
|
+ * Copyright (c) 2010 Michael Buesch <mb@bu3sch.de>
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or
|
|
+ * modify it under the terms of the GNU General Public License
|
|
+ * as published by the Free Software Foundation; either version 2
|
|
+ * of the License, or (at your option) any later version.
|
|
+ *
|
|
+ * This program is distributed in the hope that it will be useful,
|
|
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
+ * GNU General Public License for more details.
|
|
+ */
|
|
+
|
|
+#include <linux/module.h>
|
|
+#include <linux/device.h>
|
|
+#include <linux/platform_device.h>
|
|
+#include <linux/slab.h>
|
|
+#include <linux/spinlock.h>
|
|
+#include <linux/timer.h>
|
|
+#include <linux/reboot.h>
|
|
+
|
|
+#include "retu.h"
|
|
+#include "tahvo.h"
|
|
+#include "lipocharge.h"
|
|
+
|
|
+
|
|
+#define N810BM_CHECK_INTERVAL (HZ * 5)
|
|
+#define N810BM_MIN_VOLTAGE_THRES 3300 /* Absolute minimum voltage threshold */
|
|
+
|
|
+
|
|
+/* Battery related retu ADC channels */
|
|
+#define RETU_ADC_BSI 0x01 /* Battery Size Indicator */
|
|
+#define RETU_ADC_BATTVOLT 0x08 /* Battery voltage measurement */
|
|
+
|
|
+/* RETU_ADC_BSI
|
|
+ * The battery size indicator ADC measures the resistance between
|
|
+ * the battery BSI pin and ground. This is used to detect the battery
|
|
+ * capacity, as the BSI resistor is related to capacity.
|
|
+ *
|
|
+ * Manually measured lookup table.
|
|
+ * Hard to measure, thus not very accurate.
|
|
+ *
|
|
+ * Resistance | ADC value
|
|
+ * ========================
|
|
+ * 120k | 0x3AC
|
|
+ * 110k | 0x37C
|
|
+ * 100k | 0x351
|
|
+ * 90k | 0x329
|
|
+ */
|
|
+
|
|
+/* RETU_ADC_BATTVOLT
|
|
+ * Manually measured lookup table.
|
|
+ * Hard to measure, thus not very accurate.
|
|
+ *
|
|
+ * Voltage | ADC value
|
|
+ * =====================
|
|
+ * 2.80V | 0x037
|
|
+ * 2.90V | 0x05E
|
|
+ * 3.00V | 0x090
|
|
+ * 3.10V | 0x0A4
|
|
+ * 3.20V | 0x0CC
|
|
+ * 3.30V | 0x0EF
|
|
+ * 3.40V | 0x115
|
|
+ * 3.50V | 0x136
|
|
+ * 3.60V | 0x15C
|
|
+ * 3.70V | 0x187
|
|
+ * 3.80V | 0x1A5
|
|
+ * 3.90V | 0x1C9
|
|
+ * 4.00V | 0x1ED
|
|
+ * 4.10V | 0x212
|
|
+ * 4.20V | 0x236
|
|
+ */
|
|
+
|
|
+
|
|
+enum n810bm_capacity {
|
|
+ N810BM_CAP_UNKNOWN = 0,
|
|
+ N810BM_CAP_1500MAH = 1500, /* 1500 mAh battery */
|
|
+};
|
|
+
|
|
+struct n810bm {
|
|
+ struct platform_device *pdev;
|
|
+
|
|
+ enum n810bm_capacity capacity;
|
|
+ struct timer_list check_timer;
|
|
+
|
|
+ struct lipocharge *charger;
|
|
+
|
|
+ spinlock_t lock;
|
|
+};
|
|
+
|
|
+
|
|
+static NORET_TYPE void n810bm_emergency(struct n810bm *bm, const char *message) ATTRIB_NORET;
|
|
+static void n810bm_emergency(struct n810bm *bm, const char *message)
|
|
+{
|
|
+ printk(KERN_EMERG "n810 battery management fatal fault: %s\n", message);
|
|
+ /* Force a hard shutdown. */
|
|
+ machine_power_off();
|
|
+ panic("n810bm: Failed to halt machine in emergency state\n");
|
|
+}
|
|
+
|
|
+#if 0
|
|
+static u16 retu_read(struct n810bm *bm, unsigned int reg)
|
|
+{
|
|
+ int ret;
|
|
+ unsigned long flags;
|
|
+
|
|
+ spin_lock_irqsave(&retu_lock, flags);
|
|
+ ret = retu_read_reg(reg);
|
|
+ spin_unlock_irqrestore(&retu_lock, flags);
|
|
+ if (ret < 0 || ret > 0xFFFF)
|
|
+ n810bm_emergency(bm, "retu_read");
|
|
+
|
|
+ return ret;
|
|
+}
|
|
+#endif
|
|
+
|
|
+static void retu_maskset(struct n810bm *bm, unsigned int reg, u16 mask, u16 set)
|
|
+{
|
|
+ int ret;
|
|
+ unsigned long flags;
|
|
+ u16 value;
|
|
+
|
|
+ spin_lock_irqsave(&retu_lock, flags);
|
|
+ if (~mask) {
|
|
+ ret = retu_read_reg(reg);
|
|
+ if (ret < 0 || ret > 0xFFFF)
|
|
+ goto fatal_unlock;
|
|
+ value = ret;
|
|
+ } else
|
|
+ value = 0;
|
|
+ value &= ~mask;
|
|
+ value |= set;
|
|
+ ret = retu_write_reg(reg, value);
|
|
+ if (ret)
|
|
+ goto fatal_unlock;
|
|
+ spin_unlock_irqrestore(&retu_lock, flags);
|
|
+
|
|
+ return;
|
|
+
|
|
+fatal_unlock:
|
|
+ spin_unlock_irqrestore(&retu_lock, flags);
|
|
+ n810bm_emergency(bm, "retu_maskset");
|
|
+}
|
|
+
|
|
+static inline void retu_write(struct n810bm *bm, unsigned int reg, u16 value)
|
|
+{
|
|
+ return retu_maskset(bm, reg, 0xFFFF, value);
|
|
+}
|
|
+
|
|
+static int retu_adc_average(struct n810bm *bm, unsigned int chan,
|
|
+ unsigned int nr_passes)
|
|
+{
|
|
+ unsigned int i, value = 0;
|
|
+ int ret;
|
|
+
|
|
+ if (WARN_ON(!nr_passes))
|
|
+ return 0;
|
|
+ for (i = 0; i < nr_passes; i++) {
|
|
+ ret = retu_read_adc(chan);
|
|
+ if (ret < 0)
|
|
+ return ret;
|
|
+ value += ret;
|
|
+ }
|
|
+ value /= nr_passes;
|
|
+
|
|
+ return value;
|
|
+}
|
|
+
|
|
+/* Measure the battery voltage. Returns the value in mV (or negative value on error). */
|
|
+static int n810bm_measure_batt_voltage(struct n810bm *bm)
|
|
+{
|
|
+ int adc;
|
|
+ unsigned int mv;
|
|
+ const unsigned int scale = 1000;
|
|
+
|
|
+ adc = retu_adc_average(bm, RETU_ADC_BATTVOLT, 5);
|
|
+ if (adc < 0)
|
|
+ return adc;
|
|
+ if (adc <= 0x37)
|
|
+ return 2800;
|
|
+ mv = 2800 + ((adc - 0x37) * (((4200 - 2800) * scale) / (0x236 - 0x37))) / scale;
|
|
+
|
|
+ return mv;
|
|
+}
|
|
+
|
|
+/* Read the battery capacity via BSI pin. */
|
|
+static enum n810bm_capacity n810bm_read_batt_capacity(struct n810bm *bm)
|
|
+{
|
|
+ int adc;
|
|
+ const unsigned int hyst = 20;
|
|
+
|
|
+ adc = retu_adc_average(bm, RETU_ADC_BSI, 5);
|
|
+ if (adc < 0) {
|
|
+ dev_err(&bm->pdev->dev, "Failed to read BSI ADC");
|
|
+ return N810BM_CAP_UNKNOWN;
|
|
+ }
|
|
+
|
|
+ if (adc >= 0x3B5 - hyst && adc <= 0x3B5 + hyst)
|
|
+ return N810BM_CAP_1500MAH;
|
|
+
|
|
+ dev_err(&bm->pdev->dev, "Capacity indicator 0x%X unknown", adc);
|
|
+
|
|
+ return N810BM_CAP_UNKNOWN;
|
|
+}
|
|
+
|
|
+/* Convert a battery voltage (in mV) to percentage. */
|
|
+static unsigned int n810bm_mvolt2percent(unsigned int mv)
|
|
+{
|
|
+ const unsigned int minv = 3700;
|
|
+ const unsigned int maxv = 4150;
|
|
+ unsigned int percent;
|
|
+
|
|
+ mv = clamp(mv, minv, maxv);
|
|
+ percent = (mv - minv) * 100 / (maxv - minv);
|
|
+
|
|
+ return percent;
|
|
+}
|
|
+
|
|
+static void n810bm_check_timer(unsigned long data)
|
|
+{
|
|
+ struct n810bm *bm = (struct n810bm *)data;
|
|
+ unsigned long flags;
|
|
+ int mv;
|
|
+
|
|
+ spin_lock_irqsave(&bm->lock, flags);
|
|
+
|
|
+ mv = n810bm_measure_batt_voltage(bm);
|
|
+ if (mv < 0)
|
|
+ n810bm_emergency(bm, "check timer: Failed to measure");
|
|
+ if (mv < N810BM_MIN_VOLTAGE_THRES)
|
|
+ n810bm_emergency(bm, "check timer: Minimum voltage threshold reached");
|
|
+
|
|
+ mod_timer(&bm->check_timer, round_jiffies(jiffies + N810BM_CHECK_INTERVAL));
|
|
+ spin_unlock_irqrestore(&bm->lock, flags);
|
|
+
|
|
+ return;
|
|
+}
|
|
+
|
|
+static void n810bm_adc_irq_handler(unsigned long data)
|
|
+{
|
|
+ struct n810bm *bm = (struct n810bm *)data;
|
|
+
|
|
+ retu_ack_irq(RETU_INT_ADCS);
|
|
+ //TODO
|
|
+printk("n810bm: ADC timer triggered\n");
|
|
+}
|
|
+
|
|
+static ssize_t n810bm_attr_charge_show(struct device *dev,
|
|
+ struct device_attribute *attr,
|
|
+ char *buf)
|
|
+{
|
|
+ struct platform_device *pdev = to_platform_device(dev);
|
|
+ struct n810bm *bm = platform_get_drvdata(pdev);
|
|
+ int err = -ENODEV;
|
|
+ ssize_t count = 0;
|
|
+ int millivolt;
|
|
+
|
|
+ spin_lock_irq(&bm->lock);
|
|
+ millivolt = n810bm_measure_batt_voltage(bm);
|
|
+ if (millivolt >= 0) {
|
|
+ count = snprintf(buf, PAGE_SIZE, "%u\n",
|
|
+ n810bm_mvolt2percent(millivolt));
|
|
+ err = 0;
|
|
+ }
|
|
+ spin_unlock_irq(&bm->lock);
|
|
+
|
|
+ return err ? err : count;
|
|
+}
|
|
+static DEVICE_ATTR(batt_charge, 0444, n810bm_attr_charge_show, NULL);
|
|
+
|
|
+static ssize_t n810bm_attr_capacity_show(struct device *dev,
|
|
+ struct device_attribute *attr,
|
|
+ char *buf)
|
|
+{
|
|
+ struct platform_device *pdev = to_platform_device(dev);
|
|
+ struct n810bm *bm = platform_get_drvdata(pdev);
|
|
+ ssize_t count;
|
|
+
|
|
+ spin_lock_irq(&bm->lock);
|
|
+ count = snprintf(buf, PAGE_SIZE, "%u\n",
|
|
+ (unsigned int)bm->capacity);
|
|
+ spin_unlock_irq(&bm->lock);
|
|
+
|
|
+ return count;
|
|
+}
|
|
+static DEVICE_ATTR(batt_capacity, 0444, n810bm_attr_capacity_show, NULL);
|
|
+
|
|
+static void n810bm_hw_exit(struct n810bm *bm)
|
|
+{
|
|
+ retu_write(bm, RETU_REG_ADCSCR, 0);
|
|
+}
|
|
+
|
|
+static int n810bm_hw_init(struct n810bm *bm)
|
|
+{
|
|
+ retu_write(bm, RETU_REG_ADCSCR, 0);
|
|
+
|
|
+ bm->capacity = n810bm_read_batt_capacity(bm);
|
|
+ if (bm->capacity == N810BM_CAP_UNKNOWN) {
|
|
+ dev_err(&bm->pdev->dev, "Unknown battery detected");
|
|
+ return -ENODEV;
|
|
+ }
|
|
+ dev_info(&bm->pdev->dev, "Detected %u mAh battery\n",
|
|
+ (unsigned int)bm->capacity);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int __devinit n810bm_probe(struct platform_device *pdev)
|
|
+{
|
|
+ struct n810bm *bm;
|
|
+ int err;
|
|
+
|
|
+ bm = kzalloc(sizeof(*bm), GFP_KERNEL);
|
|
+ if (!bm)
|
|
+ return -ENOMEM;
|
|
+ bm->pdev = pdev;
|
|
+ platform_set_drvdata(pdev, bm);
|
|
+ spin_lock_init(&bm->lock);
|
|
+ setup_timer(&bm->check_timer, n810bm_check_timer, (unsigned long)bm);
|
|
+
|
|
+ err = n810bm_hw_init(bm);
|
|
+ if (err)
|
|
+ goto err_free;
|
|
+ err = device_create_file(&pdev->dev, &dev_attr_batt_charge);
|
|
+ if (err)
|
|
+ goto err_exit;
|
|
+ err = device_create_file(&pdev->dev, &dev_attr_batt_capacity);
|
|
+ if (err)
|
|
+ goto err_rem_charge;
|
|
+ err = retu_request_irq(RETU_INT_ADCS, n810bm_adc_irq_handler,
|
|
+ (unsigned long)bm, "n810bm");
|
|
+ if (err)
|
|
+ goto err_rem_capa;
|
|
+
|
|
+ mod_timer(&bm->check_timer, round_jiffies(jiffies + N810BM_CHECK_INTERVAL));
|
|
+
|
|
+ dev_info(&pdev->dev, "Battery management initialized");
|
|
+
|
|
+ return 0;
|
|
+
|
|
+err_rem_capa:
|
|
+ device_remove_file(&pdev->dev, &dev_attr_batt_capacity);
|
|
+err_rem_charge:
|
|
+ device_remove_file(&pdev->dev, &dev_attr_batt_charge);
|
|
+err_exit:
|
|
+ n810bm_hw_exit(bm);
|
|
+err_free:
|
|
+ kfree(bm);
|
|
+ platform_set_drvdata(pdev, NULL);
|
|
+ return err;
|
|
+}
|
|
+
|
|
+static int __devexit n810bm_remove(struct platform_device *pdev)
|
|
+{
|
|
+ struct n810bm *bm = platform_get_drvdata(pdev);
|
|
+
|
|
+ retu_free_irq(RETU_INT_ADCS);
|
|
+ del_timer_sync(&bm->check_timer);
|
|
+ device_remove_file(&pdev->dev, &dev_attr_batt_capacity);
|
|
+ device_remove_file(&pdev->dev, &dev_attr_batt_charge);
|
|
+ n810bm_hw_exit(bm);
|
|
+
|
|
+ kfree(bm);
|
|
+ platform_set_drvdata(pdev, NULL);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static struct platform_driver n810bm_driver = {
|
|
+ .remove = __devexit_p(n810bm_remove),
|
|
+ .driver = {
|
|
+ .name = "n810bm",
|
|
+ }
|
|
+};
|
|
+
|
|
+static int __init n810bm_modinit(void)
|
|
+{
|
|
+ return platform_driver_probe(&n810bm_driver, n810bm_probe);
|
|
+}
|
|
+module_init(n810bm_modinit);
|
|
+
|
|
+static void __exit n810bm_modexit(void)
|
|
+{
|
|
+ platform_driver_unregister(&n810bm_driver);
|
|
+}
|
|
+module_exit(n810bm_modexit);
|
|
+
|
|
+MODULE_DESCRIPTION("Nokia n810 battery management");
|
|
+MODULE_LICENSE("GPL");
|
|
+MODULE_AUTHOR("Michael Buesch");
|
|
Index: linux-2.6.37-rc1/drivers/cbus/retu.c
|
|
===================================================================
|
|
--- linux-2.6.37-rc1.orig/drivers/cbus/retu.c 2010-11-05 17:38:14.834000050 +0100
|
|
+++ linux-2.6.37-rc1/drivers/cbus/retu.c 2010-11-05 17:38:14.895000001 +0100
|
|
@@ -85,10 +85,10 @@
|
|
*
|
|
* This function writes a value to the specified register
|
|
*/
|
|
-void retu_write_reg(int reg, u16 val)
|
|
+int retu_write_reg(int reg, u16 val)
|
|
{
|
|
BUG_ON(!retu_initialized);
|
|
- cbus_write_reg(cbus_host, RETU_ID, reg, val);
|
|
+ return cbus_write_reg(cbus_host, RETU_ID, reg, val);
|
|
}
|
|
|
|
void retu_set_clear_reg_bits(int reg, u16 set, u16 clear)
|
|
Index: linux-2.6.37-rc1/drivers/cbus/retu.h
|
|
===================================================================
|
|
--- linux-2.6.37-rc1.orig/drivers/cbus/retu.h 2010-11-05 17:38:14.834000050 +0100
|
|
+++ linux-2.6.37-rc1/drivers/cbus/retu.h 2010-11-05 17:38:14.895000001 +0100
|
|
@@ -39,6 +39,7 @@
|
|
#define RETU_REG_CC2 0x0e /* Common control register 2 */
|
|
#define RETU_REG_CTRL_CLR 0x0f /* Regulator clear register */
|
|
#define RETU_REG_CTRL_SET 0x10 /* Regulator set register */
|
|
+#define RETU_REG_UNK1 0x14 /* 0x1000 is set when charger is plugged in */
|
|
#define RETU_REG_STATUS 0x16 /* Status register */
|
|
#define RETU_REG_WATCHDOG 0x17 /* Watchdog register */
|
|
#define RETU_REG_AUDTXR 0x18 /* Audio Codec Tx register */
|
|
@@ -58,7 +59,7 @@
|
|
#define MAX_RETU_IRQ_HANDLERS 16
|
|
|
|
int retu_read_reg(int reg);
|
|
-void retu_write_reg(int reg, u16 val);
|
|
+int retu_write_reg(int reg, u16 val);
|
|
void retu_set_clear_reg_bits(int reg, u16 set, u16 clear);
|
|
int retu_read_adc(int channel);
|
|
int retu_request_irq(int id, void *irq_handler, unsigned long arg, char *name);
|
|
Index: linux-2.6.37-rc1/arch/arm/mach-omap2/board-n8x0.c
|
|
===================================================================
|
|
--- linux-2.6.37-rc1.orig/arch/arm/mach-omap2/board-n8x0.c 2010-11-05 17:38:14.819000329 +0100
|
|
+++ linux-2.6.37-rc1/arch/arm/mach-omap2/board-n8x0.c 2010-11-05 17:38:14.895000001 +0100
|
|
@@ -908,6 +908,17 @@
|
|
ARRAY_SIZE(n8x0_gpio_switches));
|
|
}
|
|
|
|
+static struct platform_device n810_bm_device = {
|
|
+ .name = "n810bm",
|
|
+ .id = -1,
|
|
+};
|
|
+
|
|
+static void __init n810_bm_init(void)
|
|
+{
|
|
+ if (platform_device_register(&n810_bm_device))
|
|
+ BUG();
|
|
+}
|
|
+
|
|
static void __init n8x0_init_machine(void)
|
|
{
|
|
omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAC);
|
|
@@ -930,6 +941,8 @@
|
|
n8x0_onenand_init();
|
|
n8x0_mmc_init();
|
|
n8x0_usb_init();
|
|
+
|
|
+ n810_bm_init();
|
|
}
|
|
|
|
MACHINE_START(NOKIA_N800, "Nokia N800")
|
|
Index: linux-2.6.37-rc1/drivers/cbus/lipocharge.c
|
|
===================================================================
|
|
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
|
|
+++ linux-2.6.37-rc1/drivers/cbus/lipocharge.c 2010-11-05 17:38:14.895000001 +0100
|
|
@@ -0,0 +1,63 @@
|
|
+/*
|
|
+ * Generic LIPO battery charger
|
|
+ *
|
|
+ * Copyright (c) 2010 Michael Buesch <mb@bu3sch.de>
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or
|
|
+ * modify it under the terms of the GNU General Public License
|
|
+ * as published by the Free Software Foundation; either version 2
|
|
+ * of the License, or (at your option) any later version.
|
|
+ *
|
|
+ * This program is distributed in the hope that it will be useful,
|
|
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
+ * GNU General Public License for more details.
|
|
+ */
|
|
+
|
|
+#include "lipocharge.h"
|
|
+
|
|
+#include <linux/slab.h>
|
|
+
|
|
+
|
|
+static void lipocharge_timer(unsigned long data)
|
|
+{
|
|
+ struct lipocharge *c = (struct lipocharge *)data;
|
|
+
|
|
+ spin_lock(&c->lock);
|
|
+ //TODO
|
|
+ spin_unlock(&c->lock);
|
|
+}
|
|
+
|
|
+struct lipocharge * lipocharge_alloc(gfp_t gfp)
|
|
+{
|
|
+ struct lipocharge *c;
|
|
+
|
|
+ c = kzalloc(sizeof(*c), gfp);
|
|
+ if (!c)
|
|
+ return NULL;
|
|
+ spin_lock_init(&c->lock);
|
|
+ setup_timer(&c->timer, lipocharge_timer, (unsigned long)c);
|
|
+
|
|
+ return c;
|
|
+}
|
|
+
|
|
+void lipocharge_free(struct lipocharge *c)
|
|
+{
|
|
+ kfree(c);
|
|
+}
|
|
+
|
|
+int lipocharge_start(struct lipocharge *c)
|
|
+{
|
|
+ if (!c->set_current || !c->get_voltage ||
|
|
+ !c->finished || !c->emergency)
|
|
+ return -EINVAL;
|
|
+ if (!c->top_voltage || c->top_voltage > 4200)
|
|
+ return -EINVAL;
|
|
+ //TODO
|
|
+}
|
|
+
|
|
+void lipocharge_stop(struct lipocharge *c)
|
|
+{
|
|
+ del_timer_sync(&c->timer);
|
|
+ //TODO
|
|
+}
|
|
Index: linux-2.6.37-rc1/drivers/cbus/lipocharge.h
|
|
===================================================================
|
|
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
|
|
+++ linux-2.6.37-rc1/drivers/cbus/lipocharge.h 2010-11-05 17:38:14.895000001 +0100
|
|
@@ -0,0 +1,50 @@
|
|
+#ifndef LIPOCHARGE_H_
|
|
+#define LIPOCHARGE_H_
|
|
+
|
|
+#include <linux/timer.h>
|
|
+#include <linux/spinlock.h>
|
|
+
|
|
+
|
|
+#define LIPORATE(a,b) (((a) * 1000) + (b))
|
|
+#define LIPORATE_1C LIPORATE(1,0) /* 1C */
|
|
+#define LIPORATE_p8C LIPORATE(0,8) /* 0.8C */
|
|
+
|
|
+/** struct lipocharge - A generic LIPO charger
|
|
+ *
|
|
+ * @capacity: Battery capacity in mAh.
|
|
+ * @rate: Charge rate.
|
|
+ * @top_voltage: Fully charged voltage, in mV.
|
|
+ *
|
|
+ * @set_current: Set the charge current, in mA.
|
|
+ * @get_voltage: Get the battery voltage, in mV.
|
|
+ *
|
|
+ * @emergency: Something went wrong. Force shutdown.
|
|
+ *
|
|
+ * @priv: opaque pointer.
|
|
+ */
|
|
+struct lipocharge
|
|
+{
|
|
+ unsigned int capacity;
|
|
+ unsigned int rate;
|
|
+ unsigned int top_voltage;
|
|
+
|
|
+ int (*set_current)(struct lipocharge *c, unsigned int ma);
|
|
+ int (*get_voltage)(struct lipocharge *c, unsigned int *mv);
|
|
+
|
|
+ void (*finished)(struct lipocharge *c);
|
|
+ void (*emergency)(struct lipocharge *c);
|
|
+
|
|
+ void *priv;
|
|
+
|
|
+ /* internal */
|
|
+ spinlock_t lock;
|
|
+ struct timer_list timer;
|
|
+};
|
|
+
|
|
+struct lipocharge * lipocharge_alloc(gfp_t gfp);
|
|
+void lipocharge_free(struct lipocharge *c);
|
|
+
|
|
+int lipocharge_start(struct lipocharge *c);
|
|
+void lipocharge_stop(struct lipocharge *c);
|
|
+
|
|
+#endif /* LIPOCHARGE_H_ */
|
|
Index: linux-2.6.37-rc1/drivers/cbus/tahvo.h
|
|
===================================================================
|
|
--- linux-2.6.37-rc1.orig/drivers/cbus/tahvo.h 2010-11-05 17:38:14.835000037 +0100
|
|
+++ linux-2.6.37-rc1/drivers/cbus/tahvo.h 2010-11-05 17:38:14.895000001 +0100
|
|
@@ -30,8 +30,14 @@
|
|
#define TAHVO_REG_IDR 0x01 /* Interrupt ID */
|
|
#define TAHVO_REG_IDSR 0x02 /* Interrupt status */
|
|
#define TAHVO_REG_IMR 0x03 /* Interrupt mask */
|
|
+#define TAHVO_REG_CHGCURR 0x04 /* Charge current control (8-bit) */
|
|
#define TAHVO_REG_LEDPWMR 0x05 /* LED PWM */
|
|
#define TAHVO_REG_USBR 0x06 /* USB control */
|
|
+#define TAHVO_REG_CHGCTL 0x08 /* Charge control register */
|
|
+#define TAHVO_REG_CHGCTL_EN 0x0001 /* Global charge enable */
|
|
+#define TAHVO_REG_CHGCTL2 0x0c /* Charge control register 2 */
|
|
+#define TAHVO_REG_BATCURR 0x0d /* Battery (dis)charge current (signed 16-bit) */
|
|
+
|
|
#define TAHVO_REG_MAX 0x0d
|
|
|
|
/* Interrupt sources */
|