qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-09-12 23:07:43 +03:00
Code
15870b5ffe
openwrt-xburst/package/mac80211/patches/405-ath9k-use-correct-init-values-for-ar9100-devices.patch
juhosg 15870b5ffe [package] mac80211: update compat-wireless to 2009-03-04, and refresh patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14749 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-05 12:49:25 +00:00

276 lines
9.8 KiB
Diff
Raw Blame History

From 91ada2959c75a3690bf009fd4314dd52454568df Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Tue, 3 Mar 2009 15:21:30 +0100
Subject: [RFC] ath9k: use correct init values for ar9100 devices
Changes-licensed-under: ISC
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
---
drivers/net/wireless/ath9k/initvals.h | 44 ++++++++++++++++----------------
drivers/net/wireless/ath9k/reg.h | 32 ++++++++++++-----------
2 files changed, 39 insertions(+), 37 deletions(-)
Hi,
Currently I'm trying to resolve the following mysterious issues caused by the
ath9k driver on the ar913x based devices:
1. In some cases the ethernet interface goes down for a short time
after'ifconfig wlan0 up'.
2. Sometimes the device simply reboots itself after 'ifconfig wlan0 up'.
After I have added some printk statements into the code, I noticed that the
ar5416 and ar9100 devices use the same initval arrays currently. I assume
that they requires different initialization, because we have different
arrays for them.
Although I have no detailed knowledge about the evolution of the ath9k devices,
but the version checking macros for ther AR5416 cards seemed weird enough, so I
have replaced them. Unfortunately, this leaded to very bad performance with the
ar5416 cards I have, but the driver was working on the ar913x boards.
After some digging, I have found an interesting ifdef statement in Sam's current
HAL. In his ar5416Common initval array, this ifdef conditionally selects the
right RTC register offsets for the ar5416/ar9100 devices. The strange thing,
that in the ath9k driver the ar5416 specific RTC register offsets are used in
the ar5416Common_ar9100 array, while the ar9100 specific offsets are used in the
ar5416Common.
After I have renamed the arrays and tested the ath9k driver with the new
settings on the ar9100 devices, the strange problems I have mentioned above
disappeared. Unfortunately I have no ar5418 devices so I can't test them,
but they are using the same array as before so this change should not
cause problems on them.
Regards,
Gabor
--- a/drivers/net/wireless/ath9k/initvals.h
+++ b/drivers/net/wireless/ath9k/initvals.h
@@ -14,7 +14,7 @@
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
-static const u32 ar5416Modes_9100[][6] = {
+static const u32 ar5416Modes[][6] = {
{ 0x00001030, 0x00000230, 0x00000460, 0x000002c0, 0x00000160, 0x000001e0 },
{ 0x00001070, 0x00000168, 0x000002d0, 0x00000318, 0x0000018c, 0x000001e0 },
{ 0x000010b0, 0x00000e60, 0x00001cc0, 0x00007c70, 0x00003e38, 0x00001180 },
@@ -78,7 +78,7 @@ static const u32 ar5416Modes_9100[][6] =
{ 0x0000a334, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
};
-static const u32 ar5416Common_9100[][2] = {
+static const u32 ar5416Common[][2] = {
{ 0x0000000c, 0x00000000 },
{ 0x00000030, 0x00020015 },
{ 0x00000034, 0x00000005 },
@@ -456,12 +456,12 @@ static const u32 ar5416Common_9100[][2]
{ 0x0000a3e0, 0x000001ce },
};
-static const u32 ar5416Bank0_9100[][2] = {
+static const u32 ar5416Bank0[][2] = {
{ 0x000098b0, 0x1e5795e5 },
{ 0x000098e0, 0x02008020 },
};
-static const u32 ar5416BB_RfGain_9100[][3] = {
+static const u32 ar5416BB_RfGain[][3] = {
{ 0x00009a00, 0x00000000, 0x00000000 },
{ 0x00009a04, 0x00000040, 0x00000040 },
{ 0x00009a08, 0x00000080, 0x00000080 },
@@ -528,21 +528,21 @@ static const u32 ar5416BB_RfGain_9100[][
{ 0x00009afc, 0x000000f9, 0x000000f9 },
};
-static const u32 ar5416Bank1_9100[][2] = {
+static const u32 ar5416Bank1[][2] = {
{ 0x000098b0, 0x02108421 },
{ 0x000098ec, 0x00000008 },
};
-static const u32 ar5416Bank2_9100[][2] = {
+static const u32 ar5416Bank2[][2] = {
{ 0x000098b0, 0x0e73ff17 },
{ 0x000098e0, 0x00000420 },
};
-static const u32 ar5416Bank3_9100[][3] = {
+static const u32 ar5416Bank3[][3] = {
{ 0x000098f0, 0x01400018, 0x01c00018 },
};
-static const u32 ar5416Bank6_9100[][3] = {
+static const u32 ar5416Bank6[][3] = {
{ 0x0000989c, 0x00000000, 0x00000000 },
{ 0x0000989c, 0x00000000, 0x00000000 },
@@ -579,7 +579,7 @@ static const u32 ar5416Bank6_9100[][3] =
{ 0x000098d0, 0x0000000f, 0x0010000f },
};
-static const u32 ar5416Bank6TPC_9100[][3] = {
+static const u32 ar5416Bank6TPC[][3] = {
{ 0x0000989c, 0x00000000, 0x00000000 },
{ 0x0000989c, 0x00000000, 0x00000000 },
{ 0x0000989c, 0x00000000, 0x00000000 },
@@ -615,13 +615,13 @@ static const u32 ar5416Bank6TPC_9100[][3
{ 0x000098d0, 0x0000000f, 0x0010000f },
};
-static const u32 ar5416Bank7_9100[][2] = {
+static const u32 ar5416Bank7[][2] = {
{ 0x0000989c, 0x00000500 },
{ 0x0000989c, 0x00000800 },
{ 0x000098cc, 0x0000000e },
};
-static const u32 ar5416Addac_9100[][2] = {
+static const u32 ar5416Addac[][2] = {
{0x0000989c, 0x00000000 },
{0x0000989c, 0x00000003 },
{0x0000989c, 0x00000000 },
@@ -661,7 +661,7 @@ static const u32 ar5416Addac_9100[][2] =
{0x000098cc, 0x00000000 },
};
-static const u32 ar5416Modes[][6] = {
+static const u32 ar5416Modes_9100[][6] = {
{ 0x00001030, 0x00000230, 0x00000460, 0x000002c0, 0x00000160, 0x000001e0 },
{ 0x00001070, 0x00000168, 0x000002d0, 0x00000318, 0x0000018c, 0x000001e0 },
{ 0x000010b0, 0x00000e60, 0x00001cc0, 0x00007c70, 0x00003e38, 0x00001180 },
@@ -735,7 +735,7 @@ static const u32 ar5416Modes[][6] = {
{ 0x0000a334, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
};
-static const u32 ar5416Common[][2] = {
+static const u32 ar5416Common_9100[][2] = {
{ 0x0000000c, 0x00000000 },
{ 0x00000030, 0x00020015 },
{ 0x00000034, 0x00000005 },
@@ -1109,12 +1109,12 @@ static const u32 ar5416Common[][2] = {
{ 0x0000a3e0, 0x000001ce },
};
-static const u32 ar5416Bank0[][2] = {
+static const u32 ar5416Bank0_9100[][2] = {
{ 0x000098b0, 0x1e5795e5 },
{ 0x000098e0, 0x02008020 },
};
-static const u32 ar5416BB_RfGain[][3] = {
+static const u32 ar5416BB_RfGain_9100[][3] = {
{ 0x00009a00, 0x00000000, 0x00000000 },
{ 0x00009a04, 0x00000040, 0x00000040 },
{ 0x00009a08, 0x00000080, 0x00000080 },
@@ -1181,21 +1181,21 @@ static const u32 ar5416BB_RfGain[][3] =
{ 0x00009afc, 0x000000f9, 0x000000f9 },
};
-static const u32 ar5416Bank1[][2] = {
+static const u32 ar5416Bank1_9100[][2] = {
{ 0x000098b0, 0x02108421},
{ 0x000098ec, 0x00000008},
};
-static const u32 ar5416Bank2[][2] = {
+static const u32 ar5416Bank2_9100[][2] = {
{ 0x000098b0, 0x0e73ff17},
{ 0x000098e0, 0x00000420},
};
-static const u32 ar5416Bank3[][3] = {
+static const u32 ar5416Bank3_9100[][3] = {
{ 0x000098f0, 0x01400018, 0x01c00018 },
};
-static const u32 ar5416Bank6[][3] = {
+static const u32 ar5416Bank6_9100[][3] = {
{ 0x0000989c, 0x00000000, 0x00000000 },
{ 0x0000989c, 0x00000000, 0x00000000 },
@@ -1233,7 +1233,7 @@ static const u32 ar5416Bank6[][3] = {
};
-static const u32 ar5416Bank6TPC[][3] = {
+static const u32 ar5416Bank6TPC_9100[][3] = {
{ 0x0000989c, 0x00000000, 0x00000000 },
{ 0x0000989c, 0x00000000, 0x00000000 },
@@ -1270,13 +1270,13 @@ static const u32 ar5416Bank6TPC[][3] = {
{ 0x000098d0, 0x0000000f, 0x0010000f },
};
-static const u32 ar5416Bank7[][2] = {
+static const u32 ar5416Bank7_9100[][2] = {
{ 0x0000989c, 0x00000500 },
{ 0x0000989c, 0x00000800 },
{ 0x000098cc, 0x0000000e },
};
-static const u32 ar5416Addac[][2] = {
+static const u32 ar5416Addac_9100[][2] = {
{0x0000989c, 0x00000000 },
{0x0000989c, 0x00000000 },
{0x0000989c, 0x00000000 },
--- a/drivers/net/wireless/ath9k/reg.h
+++ b/drivers/net/wireless/ath9k/reg.h
@@ -158,14 +158,6 @@
#define AR_CST_TIMEOUT_LIMIT 0xFFFF0000
#define AR_CST_TIMEOUT_LIMIT_S 16
-#define AR_SREV_VERSION_9100 0x014
-
-#define AR_SREV_9100(ah) ((ah->hw_version.macVersion) == AR_SREV_VERSION_9100)
-#define AR_SREV_5416_V20_OR_LATER(_ah) \
- (AR_SREV_9100((_ah)) || AR_SREV_5416_20_OR_LATER(_ah))
-#define AR_SREV_5416_V22_OR_LATER(_ah) \
- (AR_SREV_9100((_ah)) || AR_SREV_5416_22_OR_LATER(_ah))
-
#define AR_ISR 0x0080
#define AR_ISR_RXOK 0x00000001
#define AR_ISR_RXDESC 0x00000002
@@ -734,6 +726,7 @@
#define AR_SREV_REVISION_5416_10 0
#define AR_SREV_REVISION_5416_20 1
#define AR_SREV_REVISION_5416_22 2
+#define AR_SREV_VERSION_9100 0x14
#define AR_SREV_VERSION_9160 0x40
#define AR_SREV_REVISION_9160_10 0
#define AR_SREV_REVISION_9160_11 1
@@ -746,14 +739,23 @@
#define AR_SREV_REVISION_9285_11 1
#define AR_SREV_REVISION_9285_12 2
+#define AR_SREV_5416(_ah) \
+ (((_ah)->hw_version.macVersion == AR_SREV_VERSION_5416_PCIE) || \
+ ((_ah)->hw_version.macVersion == AR_SREV_VERSION_5416_PCI))
+#define AR_SREV_5416_V20_OR_LATER(_ah) \
+ (((_ah)->hw_version.macVersion > AR_SREV_VERSION_5416_PCIE) || \
+ ((AR_SREV_5416(_ah)) && \
+ ((_ah)->hw_version.macRev >= AR_SREV_REVISION_5416_20)))
+#define AR_SREV_5416_V22_OR_LATER(_ah) \
+ (((_ah)->hw_version.macVersion > AR_SREV_VERSION_5416_PCIE) || \
+ ((AR_SREV_5416(_ah)) && \
+ ((_ah)->hw_version.macRev >= AR_SREV_REVISION_5416_22)))
+
+#define AR_SREV_9100(ah) \
+ ((ah->hw_version.macVersion) == AR_SREV_VERSION_9100)
#define AR_SREV_9100_OR_LATER(_ah) \
- (((_ah)->hw_version.macVersion >= AR_SREV_VERSION_5416_PCIE))
-#define AR_SREV_5416_20_OR_LATER(_ah) \
- (((_ah)->hw_version.macVersion >= AR_SREV_VERSION_9160) || \
- ((_ah)->hw_version.macRev >= AR_SREV_REVISION_5416_20))
-#define AR_SREV_5416_22_OR_LATER(_ah) \
- (((_ah)->hw_version.macVersion >= AR_SREV_VERSION_9160) || \
- ((_ah)->hw_version.macRev >= AR_SREV_REVISION_5416_22))
+ ((_ah)->hw_version.macVersion >= AR_SREV_VERSION_9100)
+
#define AR_SREV_9160(_ah) \
(((_ah)->hw_version.macVersion == AR_SREV_VERSION_9160))
#define AR_SREV_9160_10_OR_LATER(_ah) \
View Git Blame Copy Permalink