mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-12-11 12:00:38 +02:00
dc3d3f1c49
it's basically also provided by ingenic and nativly based on 2.6.27, adjusted to fit into the OpenWrt-environment
268 lines
8.1 KiB
C
268 lines
8.1 KiB
C
|
|
/*
|
|
* linux/drivers/video/jz4750_lcd.h -- Ingenic Jz4750 On-Chip LCD frame buffer device
|
|
*
|
|
* Copyright (C) 2005-2008, Ingenic Semiconductor Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
*/
|
|
|
|
#ifndef __JZ4750_LCD_H__
|
|
#define __JZ4750_LCD_H__
|
|
|
|
/* Please define next in lcd panel header file
|
|
* __lcd_special_pin_init()
|
|
* __lcd_special_on()
|
|
* __lcd_special_off()
|
|
*/
|
|
|
|
#if defined(CONFIG_JZ4750_ANDROID_LCD_AUO_A043FL01V2)
|
|
#include "jz_auo_a043fl01v2.h"
|
|
#endif
|
|
|
|
#if defined(CONFIG_JZ4750_ANDROID_LCD_TOPPOLY_TD043MGEB1)
|
|
#include "jz_toppoly_td043mgeb1.h"
|
|
#endif
|
|
|
|
//#include <asm/io.h>
|
|
|
|
|
|
#define NR_PALETTE 256
|
|
#define PALETTE_SIZE (NR_PALETTE*2)
|
|
|
|
|
|
/* use new descriptor(8 words) */
|
|
struct jz4750_lcd_dma_desc {
|
|
unsigned int next_desc; /* LCDDAx */
|
|
unsigned int databuf; /* LCDSAx */
|
|
unsigned int frame_id; /* LCDFIDx */
|
|
unsigned int cmd; /* LCDCMDx */
|
|
unsigned int offsize; /* Stride Offsize(in word) */
|
|
unsigned int page_width; /* Stride Pagewidth(in word) */
|
|
unsigned int cmd_num; /* Command Number(for SLCD) */
|
|
unsigned int desc_size; /* Foreground Size */
|
|
};
|
|
|
|
struct jz4750lcd_panel_t {
|
|
unsigned int cfg; /* panel mode and pin usage etc. */
|
|
unsigned int slcd_cfg; /* Smart lcd configurations */
|
|
unsigned int ctrl; /* lcd controll register */
|
|
unsigned int w; /* Panel Width(in pixel) */
|
|
unsigned int h; /* Panel Height(in line) */
|
|
unsigned int fclk; /* frame clk */
|
|
unsigned int hsw; /* hsync width, in pclk */
|
|
unsigned int vsw; /* vsync width, in line count */
|
|
unsigned int elw; /* end of line, in pclk */
|
|
unsigned int blw; /* begin of line, in pclk */
|
|
unsigned int efw; /* end of frame, in line count */
|
|
unsigned int bfw; /* begin of frame, in line count */
|
|
};
|
|
|
|
|
|
struct jz4750lcd_fg_t {
|
|
int bpp; /* foreground bpp */
|
|
int x; /* foreground start position x */
|
|
int y; /* foreground start position y */
|
|
int w; /* foreground width */
|
|
int h; /* foreground height */
|
|
};
|
|
|
|
struct jz4750lcd_osd_t {
|
|
unsigned int osd_cfg; /* OSDEN, ALHPAEN, F0EN, F1EN, etc */
|
|
unsigned int osd_ctrl; /* IPUEN, OSDBPP, etc */
|
|
unsigned int rgb_ctrl; /* RGB Dummy, RGB sequence, RGB to YUV */
|
|
unsigned int bgcolor; /* background color(RGB888) */
|
|
unsigned int colorkey0; /* foreground0's Colorkey enable, Colorkey value */
|
|
unsigned int colorkey1; /* foreground1's Colorkey enable, Colorkey value */
|
|
unsigned int alpha; /* ALPHAEN, alpha value */
|
|
unsigned int ipu_restart; /* IPU Restart enable, ipu restart interval time */
|
|
|
|
#define FG_NOCHANGE 0x0000
|
|
#define FG0_CHANGE_SIZE 0x0001
|
|
#define FG0_CHANGE_POSITION 0x0002
|
|
#define FG1_CHANGE_SIZE 0x0010
|
|
#define FG1_CHANGE_POSITION 0x0020
|
|
#define FG_CHANGE_ALL ( FG0_CHANGE_SIZE | FG0_CHANGE_POSITION | \
|
|
FG1_CHANGE_SIZE | FG1_CHANGE_POSITION )
|
|
int fg_change;
|
|
struct jz4750lcd_fg_t fg0; /* foreground 0 */
|
|
struct jz4750lcd_fg_t fg1; /* foreground 1 */
|
|
};
|
|
|
|
struct jz4750lcd_info {
|
|
struct jz4750lcd_panel_t panel;
|
|
struct jz4750lcd_osd_t osd;
|
|
};
|
|
|
|
|
|
/***********************Emily****************************/
|
|
|
|
#define JZ_ANDROID_PANELNUM 2
|
|
struct jz_android_din_t{
|
|
unsigned int w;
|
|
unsigned int h;
|
|
unsigned int index;
|
|
};
|
|
|
|
struct android_display_info_t {
|
|
unsigned int flag;
|
|
unsigned int fg0_number; /**/
|
|
unsigned int fg0_index;
|
|
unsigned int fg0_alpha; /* */
|
|
unsigned int fg0_colorkey;/**/
|
|
unsigned int fg0_enable;/**/
|
|
unsigned int fg0_x; /*fg0 start position x*/
|
|
unsigned int fg0_y; /*fg0 start position y*/
|
|
unsigned int fg0_w; /*the weight of fg0*/
|
|
unsigned int fg0_h; /*the height of fg0*/
|
|
unsigned int fg1_x; /*fg1 start position x*/
|
|
unsigned int fg1_y; /*fg1 start position y*/
|
|
unsigned int fg1_w; /*the weight of fg1*/
|
|
unsigned int fg1_h; /*the height of fg1*/
|
|
unsigned int fg1_enable; /*start or stop fg1*/
|
|
unsigned int fg1_short_cut;/*IPU direct*/
|
|
};
|
|
|
|
#define FBIO_ANDROID_CTL 0xad10
|
|
|
|
#define ANDROID_GET_DISPLAY_NUM 0x00000001
|
|
#define ANDROID_GET_DISPLAY_INFO 0x00000002
|
|
#define ANDROID_SET_DISPLAY_INDEX 0x00000004
|
|
#define ANDROID_SET_FG0_ALPHA 0x00000008
|
|
#define ANDROID_SET_FG0_COLORKEY 0x00000010
|
|
#define ANDROID_SET_FG0_ENABLE 0x00000020
|
|
#define ANDROID_SET_FG1_POS 0x00000040
|
|
#define ANDROID_SET_FG1_SIZE 0x00000080
|
|
#define ANDROID_SET_FG1_ENABLE 0x00000100
|
|
#define ANDROID_SET_FG1_IPU_DIRECT 0x00000200
|
|
#define ANDROID_GET_PANEL_SIZE 0x00000400
|
|
|
|
#define BARRIER __asm__ __volatile__(".set noreorder\n\t" \
|
|
"nop; nop; nop; nop; nop; nop;\n\t" \
|
|
".set reorder\n\t")
|
|
extern void local_flush_tlb_all(void);
|
|
|
|
/******************************Emily**************************************/
|
|
|
|
/* Jz LCDFB supported I/O controls. */
|
|
#define FBIOSETBACKLIGHT 0x4688 /* set back light level */
|
|
#define FBIODISPON 0x4689 /* display on */
|
|
#define FBIODISPOFF 0x468a /* display off */
|
|
#define FBIORESET 0x468b /* lcd reset */
|
|
#define FBIOPRINT_REG 0x468c /* print lcd registers(debug) */
|
|
#define FBIOROTATE 0x46a0 /* rotated fb */
|
|
#define FBIOGETBUFADDRS 0x46a1 /* get buffers addresses */
|
|
#define FBIO_GET_MODE 0x46a2 /* get lcd info */
|
|
#define FBIO_SET_MODE 0x46a3 /* set osd mode */
|
|
#define FBIO_DEEP_SET_MODE 0x46a4 /* set panel and osd mode */
|
|
#define FBIO_MODE_SWITCH 0x46a5 /* switch mode between LCD and TVE */
|
|
#define FBIO_GET_TVE_MODE 0x46a6 /* get tve info */
|
|
#define FBIO_SET_TVE_MODE 0x46a7 /* set tve mode */
|
|
#define FBIODISON_FG 0x46a8 /* FG display on */
|
|
#define FBIODISOFF_FG 0x46a9 /* FG display on */
|
|
#define FBIO_SET_LCD_TO_TVE 0x46b0 /* set lcd to tve mode */
|
|
#define FBIO_SET_FRM_TO_LCD 0x46b1 /* set framebuffer to lcd */
|
|
#define FBIO_SET_IPU_TO_LCD 0x46b2 /* set ipu to lcd directly */
|
|
#define FBIO_CHANGE_SIZE 0x46b3 /* change FG size */
|
|
#define FBIO_CHANGE_POSITION 0x46b4 /* change FG starts position */
|
|
#define FBIO_SET_BG_COLOR 0x46b5 /* set background color */
|
|
#define FBIO_SET_IPU_RESTART_VAL 0x46b6 /* set ipu restart value */
|
|
#define FBIO_SET_IPU_RESTART_ON 0x46b7 /* set ipu restart on */
|
|
#define FBIO_SET_IPU_RESTART_OFF 0x46b8 /* set ipu restart off */
|
|
#define FBIO_ALPHA_ON 0x46b9 /* enable alpha */
|
|
#define FBIO_ALPHA_OFF 0x46c0 /* disable alpha */
|
|
#define FBIO_SET_ALPHA_VAL 0x46c1 /* set alpha value */
|
|
|
|
/*
|
|
* Platform specific definition
|
|
*/
|
|
#if defined(CONFIG_SOC_JZ4750) || defined(CONFIG_SOC_JZ4750D)
|
|
|
|
#if defined(CONFIG_JZ4750_APUS) /* board apus */
|
|
#define __lcd_display_pin_init() \
|
|
do { \
|
|
__gpio_as_output(GPIO_LCD_VCC_EN_N); \
|
|
__lcd_special_pin_init(); \
|
|
} while (0)
|
|
#define __lcd_display_on() \
|
|
do { \
|
|
__gpio_clear_pin(GPIO_LCD_VCC_EN_N); \
|
|
__lcd_special_on(); \
|
|
} while (0)
|
|
|
|
#define __lcd_display_off() \
|
|
do { \
|
|
__lcd_special_off(); \
|
|
} while (0)
|
|
|
|
#elif defined(CONFIG_JZ4750D_CETUS)/* board apus */
|
|
|
|
#define __lcd_display_pin_init() \
|
|
do { \
|
|
__gpio_as_output(GPIO_LCD_VCC_EN_N); \
|
|
__lcd_special_pin_init(); \
|
|
} while (0)
|
|
#define __lcd_display_on() \
|
|
do { \
|
|
__gpio_set_pin(GPIO_LCD_VCC_EN_N); \
|
|
__lcd_special_on(); \
|
|
} while (0)
|
|
|
|
#define __lcd_display_off() \
|
|
do { \
|
|
__lcd_special_off(); \
|
|
} while (0)
|
|
|
|
#else /* other boards */
|
|
|
|
#define __lcd_display_pin_init() \
|
|
do { \
|
|
__lcd_special_pin_init(); \
|
|
} while (0)
|
|
#define __lcd_display_on() \
|
|
do { \
|
|
__lcd_special_on(); \
|
|
} while (0)
|
|
|
|
#define __lcd_display_off() \
|
|
do { \
|
|
__lcd_special_off(); \
|
|
} while (0)
|
|
#endif /* APUS */
|
|
#endif /* CONFIG_SOC_JZ4750 */
|
|
|
|
|
|
/*****************************************************************************
|
|
* LCD display pin dummy macros
|
|
*****************************************************************************/
|
|
#ifndef __lcd_special_pin_init
|
|
#define __lcd_special_pin_init()
|
|
#endif
|
|
#ifndef __lcd_special_on
|
|
#define __lcd_special_on()
|
|
#endif
|
|
#ifndef __lcd_special_off
|
|
#define __lcd_special_off()
|
|
#endif
|
|
|
|
#ifndef __lcd_display_pin_init
|
|
#define __lcd_display_pin_init()
|
|
#endif
|
|
#ifndef __lcd_slcd_special_on
|
|
#define __lcd_slcd_special_on()
|
|
#endif
|
|
#ifndef __lcd_display_on
|
|
#define __lcd_display_on()
|
|
#endif
|
|
#ifndef __lcd_display_off
|
|
#define __lcd_display_off()
|
|
#endif
|
|
#ifndef __lcd_set_backlight_level
|
|
#define __lcd_set_backlight_level(n)
|
|
#endif
|
|
|
|
#endif /* __JZ4750_LCD_H__ */
|