mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-12-05 04:25:05 +02:00
8f313bd0fd
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31902 3c298f89-4303-0410-b956-a3cf2f4a3e73
92 lines
2.9 KiB
Diff
92 lines
2.9 KiB
Diff
From 2dcb0ca66d0bffc23d5f001fad81fb1a7a2c371b Mon Sep 17 00:00:00 2001
|
|
From: Maarten ter Huurne <maarten@treewalker.org>
|
|
Date: Tue, 28 Jun 2011 22:28:59 +0200
|
|
Subject: [PATCH 14/21] MIPS: JZ4740: reset: Initialize hibernate wakeup
|
|
counters.
|
|
|
|
In hibernation mode only the wakeup logic and the RTC are left running,
|
|
so this is what users perceive as power down.
|
|
|
|
If the counters are not initialized, the corresponding pin (typically
|
|
connected to the power button) has to be asserted for two seconds
|
|
before the device wakes up. Most users expect a shorter wakeup time.
|
|
|
|
I took the timing values of 100 ms and 60 ms from BouKiCHi's patch for
|
|
the Dingoo A320 kernel.
|
|
---
|
|
arch/mips/jz4740/reset.c | 46 ++++++++++++++++++++++++++++++++++++++++------
|
|
1 files changed, 40 insertions(+), 6 deletions(-)
|
|
|
|
--- a/arch/mips/jz4740/reset.c
|
|
+++ b/arch/mips/jz4740/reset.c
|
|
@@ -21,6 +21,9 @@
|
|
#include <asm/mach-jz4740/base.h>
|
|
#include <asm/mach-jz4740/timer.h>
|
|
|
|
+#include "reset.h"
|
|
+#include "clock.h"
|
|
+
|
|
static void jz4740_halt(void)
|
|
{
|
|
while (1) {
|
|
@@ -53,21 +56,52 @@ static void jz4740_restart(char *command
|
|
jz4740_halt();
|
|
}
|
|
|
|
-#define JZ_REG_RTC_CTRL 0x00
|
|
-#define JZ_REG_RTC_HIBERNATE 0x20
|
|
-
|
|
-#define JZ_RTC_CTRL_WRDY BIT(7)
|
|
+#define JZ_REG_RTC_CTRL 0x00
|
|
+#define JZ_REG_RTC_HIBERNATE 0x20
|
|
+#define JZ_REG_RTC_WAKEUP_FILTER 0x24
|
|
+#define JZ_REG_RTC_RESET_COUNTER 0x28
|
|
+
|
|
+#define JZ_RTC_CTRL_WRDY BIT(7)
|
|
+#define JZ_RTC_WAKEUP_FILTER_MASK 0x0000FFE0
|
|
+#define JZ_RTC_RESET_COUNTER_MASK 0x00000FE0
|
|
|
|
-static void jz4740_power_off(void)
|
|
+static inline void jz4740_rtc_wait_ready(void __iomem *rtc_base)
|
|
{
|
|
- void __iomem *rtc_base = ioremap(JZ4740_RTC_BASE_ADDR, 0x24);
|
|
uint32_t ctrl;
|
|
-
|
|
do {
|
|
ctrl = readl(rtc_base + JZ_REG_RTC_CTRL);
|
|
} while (!(ctrl & JZ_RTC_CTRL_WRDY));
|
|
+}
|
|
|
|
+static void jz4740_power_off(void)
|
|
+{
|
|
+ void __iomem *rtc_base = ioremap(JZ4740_RTC_BASE_ADDR, 0x38);
|
|
+ unsigned long long wakeup_filter_ticks;
|
|
+ unsigned long long reset_counter_ticks;
|
|
+
|
|
+ /* Set minimum wakeup pin assertion time: 100 ms.
|
|
+ Range is 0 to 2 sec if RTC is clocked at 32 kHz. */
|
|
+ wakeup_filter_ticks = (100 * jz4740_clock_bdata.rtc_rate) / 1000;
|
|
+ if (wakeup_filter_ticks < JZ_RTC_WAKEUP_FILTER_MASK)
|
|
+ wakeup_filter_ticks &= JZ_RTC_WAKEUP_FILTER_MASK;
|
|
+ else
|
|
+ wakeup_filter_ticks = JZ_RTC_WAKEUP_FILTER_MASK;
|
|
+ jz4740_rtc_wait_ready(rtc_base);
|
|
+ writel(wakeup_filter_ticks, rtc_base + JZ_REG_RTC_WAKEUP_FILTER);
|
|
+
|
|
+ /* Set reset pin low-level assertion time after wakeup: 60 ms.
|
|
+ Range is 0 to 125 ms if RTC is clocked at 32 kHz. */
|
|
+ reset_counter_ticks = (60 * jz4740_clock_bdata.rtc_rate) / 1000;
|
|
+ if (reset_counter_ticks < JZ_RTC_RESET_COUNTER_MASK)
|
|
+ reset_counter_ticks &= JZ_RTC_RESET_COUNTER_MASK;
|
|
+ else
|
|
+ reset_counter_ticks = JZ_RTC_RESET_COUNTER_MASK;
|
|
+ jz4740_rtc_wait_ready(rtc_base);
|
|
+ writel(reset_counter_ticks, rtc_base + JZ_REG_RTC_RESET_COUNTER);
|
|
+
|
|
+ jz4740_rtc_wait_ready(rtc_base);
|
|
writel(1, rtc_base + JZ_REG_RTC_HIBERNATE);
|
|
+
|
|
jz4740_halt();
|
|
}
|
|
|