mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-12-05 04:49:44 +02:00
10f03e0475
This patch adds 802.1Q VLAN support for the ADM6996M chip. The driver is loaded for both the FC and M model. It will detect which of the two chips is connected. The FC model is initialised, but no further functionality is offered. The PHY driver will always report "100 Mbit/s, link up", for both the M and FC models. This reflects the fact that the link between switch chip and Ethernet MAC is always on[1]. Further documentation can be found in the kernel's Documentation/networking/adm6996.txt Signed-of-By: Peter Lebbing <peter@digitalbrains.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26865 3c298f89-4303-0410-b956-a3cf2f4a3e73
738 lines
16 KiB
C
738 lines
16 KiB
C
/*
|
|
* ADM6996 switch driver
|
|
*
|
|
* swconfig interface based on ar8216.c
|
|
*
|
|
* Copyright (c) 2008 Felix Fietkau <nbd@openwrt.org>
|
|
* VLAN support Copyright (c) 2010, 2011 Peter Lebbing <peter@digitalbrains.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License v2 as published by the
|
|
* Free Software Foundation
|
|
*/
|
|
|
|
/*#define DEBUG 1*/
|
|
#include <linux/kernel.h>
|
|
#include <linux/string.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/unistd.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mii.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/phy.h>
|
|
#include <linux/switch.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/uaccess.h>
|
|
#include "adm6996.h"
|
|
|
|
MODULE_DESCRIPTION("Infineon ADM6996 Switch");
|
|
MODULE_AUTHOR("Felix Fietkau, Peter Lebbing <peter@digitalbrains.com>");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
enum adm6996_model {
|
|
ADM6996FC,
|
|
ADM6996M
|
|
};
|
|
|
|
static const char * const adm6996_model_name[] =
|
|
{
|
|
"ADM6996FC",
|
|
"ADM6996M"
|
|
};
|
|
|
|
struct adm6996_priv {
|
|
struct switch_dev dev;
|
|
struct phy_device *phydev;
|
|
|
|
enum adm6996_model model;
|
|
|
|
bool enable_vlan;
|
|
bool vlan_enabled; /* Current hardware state */
|
|
|
|
#ifdef DEBUG
|
|
u16 addr; /* Debugging: register address to operate on */
|
|
#endif
|
|
|
|
u16 pvid[ADM_NUM_PORTS]; /* Primary VLAN ID */
|
|
|
|
u16 vlan_id[ADM_NUM_VLANS];
|
|
u8 vlan_table[ADM_NUM_VLANS]; /* bitmap, 1 = port is member */
|
|
u8 vlan_tagged[ADM_NUM_VLANS]; /* bitmap, 1 = tagged member */
|
|
|
|
struct mutex reg_mutex;
|
|
|
|
/* use abstraction for regops, we want to add gpio support in the future */
|
|
u16 (*read)(struct phy_device *phydev, enum admreg reg);
|
|
void (*write)(struct phy_device *phydev, enum admreg reg, u16 val);
|
|
};
|
|
|
|
#define to_adm(_dev) container_of(_dev, struct adm6996_priv, dev)
|
|
#define phy_to_adm(_phy) ((struct adm6996_priv *) (_phy)->priv)
|
|
|
|
static inline u16
|
|
r16(struct phy_device *pdev, enum admreg reg)
|
|
{
|
|
return phy_to_adm(pdev)->read(pdev, reg);
|
|
}
|
|
|
|
static inline void
|
|
w16(struct phy_device *pdev, enum admreg reg, u16 val)
|
|
{
|
|
phy_to_adm(pdev)->write(pdev, reg, val);
|
|
}
|
|
|
|
|
|
static u16
|
|
adm6996_read_mii_reg(struct phy_device *phydev, enum admreg reg)
|
|
{
|
|
return phydev->bus->read(phydev->bus, PHYADDR(reg));
|
|
}
|
|
|
|
static void
|
|
adm6996_write_mii_reg(struct phy_device *phydev, enum admreg reg, u16 val)
|
|
{
|
|
phydev->bus->write(phydev->bus, PHYADDR(reg), val);
|
|
}
|
|
|
|
static int
|
|
adm6996_set_enable_vlan(struct switch_dev *dev, const struct switch_attr *attr,
|
|
struct switch_val *val)
|
|
{
|
|
struct adm6996_priv *priv = to_adm(dev);
|
|
|
|
if (val->value.i > 1)
|
|
return -EINVAL;
|
|
|
|
priv->enable_vlan = val->value.i;
|
|
|
|
return 0;
|
|
};
|
|
|
|
static int
|
|
adm6996_get_enable_vlan(struct switch_dev *dev, const struct switch_attr *attr,
|
|
struct switch_val *val)
|
|
{
|
|
struct adm6996_priv *priv = to_adm(dev);
|
|
|
|
val->value.i = priv->enable_vlan;
|
|
|
|
return 0;
|
|
};
|
|
|
|
#ifdef DEBUG
|
|
|
|
static int
|
|
adm6996_set_addr(struct switch_dev *dev, const struct switch_attr *attr,
|
|
struct switch_val *val)
|
|
{
|
|
struct adm6996_priv *priv = to_adm(dev);
|
|
|
|
if (val->value.i > 1023)
|
|
return -EINVAL;
|
|
|
|
priv->addr = val->value.i;
|
|
|
|
return 0;
|
|
};
|
|
|
|
static int
|
|
adm6996_get_addr(struct switch_dev *dev, const struct switch_attr *attr,
|
|
struct switch_val *val)
|
|
{
|
|
struct adm6996_priv *priv = to_adm(dev);
|
|
|
|
val->value.i = priv->addr;
|
|
|
|
return 0;
|
|
};
|
|
|
|
static int
|
|
adm6996_set_data(struct switch_dev *dev, const struct switch_attr *attr,
|
|
struct switch_val *val)
|
|
{
|
|
struct adm6996_priv *priv = to_adm(dev);
|
|
|
|
if (val->value.i > 65535)
|
|
return -EINVAL;
|
|
|
|
w16(priv->phydev, priv->addr, val->value.i);
|
|
|
|
return 0;
|
|
};
|
|
|
|
static int
|
|
adm6996_get_data(struct switch_dev *dev, const struct switch_attr *attr,
|
|
struct switch_val *val)
|
|
{
|
|
struct adm6996_priv *priv = to_adm(dev);
|
|
|
|
val->value.i = r16(priv->phydev, priv->addr);
|
|
|
|
return 0;
|
|
};
|
|
|
|
#endif /* def DEBUG */
|
|
|
|
static int
|
|
adm6996_set_pvid(struct switch_dev *dev, int port, int vlan)
|
|
{
|
|
struct adm6996_priv *priv = to_adm(dev);
|
|
|
|
dev_dbg (&priv->phydev->dev, "set_pvid port %d vlan %d\n", port
|
|
, vlan);
|
|
|
|
if (vlan > ADM_VLAN_MAX_ID)
|
|
return -EINVAL;
|
|
|
|
priv->pvid[port] = vlan;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
adm6996_get_pvid(struct switch_dev *dev, int port, int *vlan)
|
|
{
|
|
struct adm6996_priv *priv = to_adm(dev);
|
|
|
|
dev_dbg (&priv->phydev->dev, "get_pvid port %d\n", port);
|
|
*vlan = priv->pvid[port];
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
adm6996_set_vid(struct switch_dev *dev, const struct switch_attr *attr,
|
|
struct switch_val *val)
|
|
{
|
|
struct adm6996_priv *priv = to_adm(dev);
|
|
|
|
dev_dbg (&priv->phydev->dev, "set_vid port %d vid %d\n", val->port_vlan,
|
|
val->value.i);
|
|
|
|
if (val->value.i > ADM_VLAN_MAX_ID)
|
|
return -EINVAL;
|
|
|
|
priv->vlan_id[val->port_vlan] = val->value.i;
|
|
|
|
return 0;
|
|
};
|
|
|
|
static int
|
|
adm6996_get_vid(struct switch_dev *dev, const struct switch_attr *attr,
|
|
struct switch_val *val)
|
|
{
|
|
struct adm6996_priv *priv = to_adm(dev);
|
|
|
|
dev_dbg (&priv->phydev->dev, "get_vid port %d\n", val->port_vlan);
|
|
|
|
val->value.i = priv->vlan_id[val->port_vlan];
|
|
|
|
return 0;
|
|
};
|
|
|
|
static int
|
|
adm6996_get_ports(struct switch_dev *dev, struct switch_val *val)
|
|
{
|
|
struct adm6996_priv *priv = to_adm(dev);
|
|
u8 ports = priv->vlan_table[val->port_vlan];
|
|
u8 tagged = priv->vlan_tagged[val->port_vlan];
|
|
int i;
|
|
|
|
dev_dbg (&priv->phydev->dev, "get_ports port_vlan %d\n",
|
|
val->port_vlan);
|
|
|
|
val->len = 0;
|
|
|
|
for (i = 0; i < ADM_NUM_PORTS; i++) {
|
|
struct switch_port *p;
|
|
|
|
if (!(ports & (1 << i)))
|
|
continue;
|
|
|
|
p = &val->value.ports[val->len++];
|
|
p->id = i;
|
|
if (tagged & (1 << i))
|
|
p->flags = (1 << SWITCH_PORT_FLAG_TAGGED);
|
|
else
|
|
p->flags = 0;
|
|
}
|
|
|
|
return 0;
|
|
};
|
|
|
|
static int
|
|
adm6996_set_ports(struct switch_dev *dev, struct switch_val *val)
|
|
{
|
|
struct adm6996_priv *priv = to_adm(dev);
|
|
u8 *ports = &priv->vlan_table[val->port_vlan];
|
|
u8 *tagged = &priv->vlan_tagged[val->port_vlan];
|
|
int i;
|
|
|
|
dev_dbg (&priv->phydev->dev, "set_ports port_vlan %d ports",
|
|
val->port_vlan);
|
|
|
|
*ports = 0;
|
|
*tagged = 0;
|
|
|
|
for (i = 0; i < val->len; i++) {
|
|
struct switch_port *p = &val->value.ports[i];
|
|
|
|
#ifdef DEBUG
|
|
pr_cont(" %d%s", p->id,
|
|
((p->flags & (1 << SWITCH_PORT_FLAG_TAGGED)) ? "T" :
|
|
""));
|
|
#endif
|
|
|
|
if (p->flags & (1 << SWITCH_PORT_FLAG_TAGGED))
|
|
*tagged |= (1 << p->id);
|
|
|
|
*ports |= (1 << p->id);
|
|
}
|
|
|
|
#ifdef DEBUG
|
|
pr_cont("\n");
|
|
#endif
|
|
|
|
return 0;
|
|
};
|
|
|
|
/*
|
|
* Precondition: reg_mutex must be held
|
|
*/
|
|
static void
|
|
adm6996_enable_vlan(struct adm6996_priv *priv)
|
|
{
|
|
u16 reg;
|
|
|
|
reg = r16(priv->phydev, ADM_OTBE_P2_PVID);
|
|
reg &= ~(ADM_OTBE_MASK);
|
|
w16(priv->phydev, ADM_OTBE_P2_PVID, reg);
|
|
reg = r16(priv->phydev, ADM_IFNTE);
|
|
reg &= ~(ADM_IFNTE_MASK);
|
|
w16(priv->phydev, ADM_IFNTE, reg);
|
|
reg = r16(priv->phydev, ADM_VID_CHECK);
|
|
reg |= ADM_VID_CHECK_MASK;
|
|
w16(priv->phydev, ADM_VID_CHECK, reg);
|
|
reg = r16(priv->phydev, ADM_SYSC0);
|
|
reg |= ADM_NTTE;
|
|
reg &= ~(ADM_RVID1);
|
|
w16(priv->phydev, ADM_SYSC0, reg);
|
|
reg = r16(priv->phydev, ADM_SYSC3);
|
|
reg |= ADM_TBV;
|
|
w16(priv->phydev, ADM_SYSC3, reg);
|
|
|
|
};
|
|
|
|
/*
|
|
* Disable VLANs
|
|
*
|
|
* Sets VLAN mapping for port-based VLAN with all ports connected to
|
|
* eachother (this is also the power-on default).
|
|
*
|
|
* Precondition: reg_mutex must be held
|
|
*/
|
|
static void
|
|
adm6996_disable_vlan(struct adm6996_priv *priv)
|
|
{
|
|
u16 reg;
|
|
int i;
|
|
|
|
for (i = 0; i < ADM_NUM_PORTS; i++) {
|
|
reg = ADM_VLAN_FILT_MEMBER_MASK;
|
|
w16(priv->phydev, ADM_VLAN_FILT_L(i), reg);
|
|
reg = ADM_VLAN_FILT_VALID | ADM_VLAN_FILT_VID(1);
|
|
w16(priv->phydev, ADM_VLAN_FILT_H(i), reg);
|
|
}
|
|
|
|
reg = r16(priv->phydev, ADM_OTBE_P2_PVID);
|
|
reg |= ADM_OTBE_MASK;
|
|
w16(priv->phydev, ADM_OTBE_P2_PVID, reg);
|
|
reg = r16(priv->phydev, ADM_IFNTE);
|
|
reg |= ADM_IFNTE_MASK;
|
|
w16(priv->phydev, ADM_IFNTE, reg);
|
|
reg = r16(priv->phydev, ADM_VID_CHECK);
|
|
reg &= ~(ADM_VID_CHECK_MASK);
|
|
w16(priv->phydev, ADM_VID_CHECK, reg);
|
|
reg = r16(priv->phydev, ADM_SYSC0);
|
|
reg &= ~(ADM_NTTE);
|
|
reg |= ADM_RVID1;
|
|
w16(priv->phydev, ADM_SYSC0, reg);
|
|
reg = r16(priv->phydev, ADM_SYSC3);
|
|
reg &= ~(ADM_TBV);
|
|
w16(priv->phydev, ADM_SYSC3, reg);
|
|
}
|
|
|
|
/*
|
|
* Precondition: reg_mutex must be held
|
|
*/
|
|
static void
|
|
adm6996_apply_port_pvids(struct adm6996_priv *priv)
|
|
{
|
|
u16 reg;
|
|
int i;
|
|
|
|
for (i = 0; i < ADM_NUM_PORTS; i++) {
|
|
reg = r16(priv->phydev, adm_portcfg[i]);
|
|
reg &= ~(ADM_PORTCFG_PVID_MASK);
|
|
reg |= ADM_PORTCFG_PVID(priv->pvid[i]);
|
|
w16(priv->phydev, adm_portcfg[i], reg);
|
|
}
|
|
|
|
w16(priv->phydev, ADM_P0_PVID, ADM_P0_PVID_VAL(priv->pvid[0]));
|
|
w16(priv->phydev, ADM_P1_PVID, ADM_P1_PVID_VAL(priv->pvid[1]));
|
|
reg = r16(priv->phydev, ADM_OTBE_P2_PVID);
|
|
reg &= ~(ADM_P2_PVID_MASK);
|
|
reg |= ADM_P2_PVID_VAL(priv->pvid[2]);
|
|
w16(priv->phydev, ADM_OTBE_P2_PVID, reg);
|
|
reg = ADM_P3_PVID_VAL(priv->pvid[3]);
|
|
reg |= ADM_P4_PVID_VAL(priv->pvid[4]);
|
|
w16(priv->phydev, ADM_P3_P4_PVID, reg);
|
|
w16(priv->phydev, ADM_P5_PVID, ADM_P5_PVID_VAL(priv->pvid[5]));
|
|
}
|
|
|
|
/*
|
|
* Precondition: reg_mutex must be held
|
|
*/
|
|
static void
|
|
adm6996_apply_vlan_filters(struct adm6996_priv *priv)
|
|
{
|
|
u8 ports, tagged;
|
|
u16 vid, reg;
|
|
int i;
|
|
|
|
for (i = 0; i < ADM_NUM_VLANS; i++) {
|
|
vid = priv->vlan_id[i];
|
|
ports = priv->vlan_table[i];
|
|
tagged = priv->vlan_tagged[i];
|
|
|
|
if (ports == 0) {
|
|
/* Disable VLAN entry */
|
|
w16(priv->phydev, ADM_VLAN_FILT_H(i), 0);
|
|
w16(priv->phydev, ADM_VLAN_FILT_L(i), 0);
|
|
continue;
|
|
}
|
|
|
|
reg = ADM_VLAN_FILT_MEMBER(ports);
|
|
reg |= ADM_VLAN_FILT_TAGGED(tagged);
|
|
w16(priv->phydev, ADM_VLAN_FILT_L(i), reg);
|
|
reg = ADM_VLAN_FILT_VALID | ADM_VLAN_FILT_VID(vid);
|
|
w16(priv->phydev, ADM_VLAN_FILT_H(i), reg);
|
|
}
|
|
}
|
|
|
|
static int
|
|
adm6996_hw_apply(struct switch_dev *dev)
|
|
{
|
|
struct adm6996_priv *priv = to_adm(dev);
|
|
|
|
dev_dbg(&priv->phydev->dev, "hw_apply\n");
|
|
|
|
mutex_lock(&priv->reg_mutex);
|
|
|
|
if (!priv->enable_vlan) {
|
|
if (priv->vlan_enabled) {
|
|
adm6996_disable_vlan(priv);
|
|
priv->vlan_enabled = 0;
|
|
}
|
|
goto out;
|
|
}
|
|
|
|
if (!priv->vlan_enabled) {
|
|
adm6996_enable_vlan(priv);
|
|
priv->vlan_enabled = 1;
|
|
}
|
|
|
|
adm6996_apply_port_pvids(priv);
|
|
adm6996_apply_vlan_filters(priv);
|
|
|
|
out:
|
|
mutex_unlock(&priv->reg_mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Reset the switch
|
|
*
|
|
* The ADM6996 can't do a software-initiated reset, so we just initialise the
|
|
* registers we support in this driver.
|
|
*
|
|
* Precondition: reg_mutex must be held
|
|
*/
|
|
static void
|
|
adm6996_perform_reset (struct adm6996_priv *priv)
|
|
{
|
|
int i;
|
|
|
|
/* initialize port and vlan settings */
|
|
for (i = 0; i < ADM_NUM_PORTS - 1; i++) {
|
|
w16(priv->phydev, adm_portcfg[i], ADM_PORTCFG_INIT |
|
|
ADM_PORTCFG_PVID(0));
|
|
}
|
|
w16(priv->phydev, adm_portcfg[5], ADM_PORTCFG_CPU);
|
|
|
|
/* reset all PHY ports */
|
|
for (i = 0; i < ADM_PHY_PORTS; i++) {
|
|
w16(priv->phydev, ADM_PHY_PORT(i), ADM_PHYCFG_INIT);
|
|
}
|
|
|
|
priv->enable_vlan = 0;
|
|
priv->vlan_enabled = 0;
|
|
|
|
for (i = 0; i < ADM_NUM_PORTS; i++) {
|
|
priv->pvid[i] = 0;
|
|
}
|
|
|
|
for (i = 0; i < ADM_NUM_VLANS; i++) {
|
|
priv->vlan_id[i] = i;
|
|
priv->vlan_table[i] = 0;
|
|
priv->vlan_tagged[i] = 0;
|
|
}
|
|
|
|
if (priv->model == ADM6996M) {
|
|
/* Clear VLAN priority map so prio's are unused */
|
|
w16 (priv->phydev, ADM_VLAN_PRIOMAP, 0);
|
|
|
|
adm6996_disable_vlan(priv);
|
|
adm6996_apply_port_pvids(priv);
|
|
}
|
|
}
|
|
|
|
static int
|
|
adm6996_reset_switch(struct switch_dev *dev)
|
|
{
|
|
struct adm6996_priv *priv = to_adm(dev);
|
|
|
|
dev_dbg (&priv->phydev->dev, "reset\n");
|
|
mutex_lock(&priv->reg_mutex);
|
|
adm6996_perform_reset (priv);
|
|
mutex_unlock(&priv->reg_mutex);
|
|
return 0;
|
|
}
|
|
|
|
static struct switch_attr adm6996_globals[] = {
|
|
{
|
|
.type = SWITCH_TYPE_INT,
|
|
.name = "enable_vlan",
|
|
.description = "Enable VLANs",
|
|
.set = adm6996_set_enable_vlan,
|
|
.get = adm6996_get_enable_vlan,
|
|
},
|
|
#ifdef DEBUG
|
|
{
|
|
.type = SWITCH_TYPE_INT,
|
|
.name = "addr",
|
|
.description =
|
|
"Direct register access: set register address (0 - 1023)",
|
|
.set = adm6996_set_addr,
|
|
.get = adm6996_get_addr,
|
|
},
|
|
{
|
|
.type = SWITCH_TYPE_INT,
|
|
.name = "data",
|
|
.description =
|
|
"Direct register access: read/write to register (0 - 65535)",
|
|
.set = adm6996_set_data,
|
|
.get = adm6996_get_data,
|
|
},
|
|
#endif /* def DEBUG */
|
|
};
|
|
|
|
static struct switch_attr adm6996_port[] = {
|
|
};
|
|
|
|
static struct switch_attr adm6996_vlan[] = {
|
|
{
|
|
.type = SWITCH_TYPE_INT,
|
|
.name = "vid",
|
|
.description = "VLAN ID",
|
|
.set = adm6996_set_vid,
|
|
.get = adm6996_get_vid,
|
|
},
|
|
};
|
|
|
|
static const struct switch_dev_ops adm6996_ops = {
|
|
.attr_global = {
|
|
.attr = adm6996_globals,
|
|
.n_attr = ARRAY_SIZE(adm6996_globals),
|
|
},
|
|
.attr_port = {
|
|
.attr = adm6996_port,
|
|
.n_attr = ARRAY_SIZE(adm6996_port),
|
|
},
|
|
.attr_vlan = {
|
|
.attr = adm6996_vlan,
|
|
.n_attr = ARRAY_SIZE(adm6996_vlan),
|
|
},
|
|
.get_port_pvid = adm6996_get_pvid,
|
|
.set_port_pvid = adm6996_set_pvid,
|
|
.get_vlan_ports = adm6996_get_ports,
|
|
.set_vlan_ports = adm6996_set_ports,
|
|
.apply_config = adm6996_hw_apply,
|
|
.reset_switch = adm6996_reset_switch,
|
|
};
|
|
|
|
static int adm6996_config_init(struct phy_device *pdev)
|
|
{
|
|
struct adm6996_priv *priv;
|
|
struct switch_dev *swdev;
|
|
|
|
int ret;
|
|
u16 test, old;
|
|
|
|
pdev->supported = ADVERTISED_100baseT_Full;
|
|
pdev->advertising = ADVERTISED_100baseT_Full;
|
|
|
|
if (pdev->addr != 0) {
|
|
pr_info ("%s: PHY overlaps ADM6996, providing fixed PHY 0x%x.\n"
|
|
, pdev->attached_dev->name, pdev->addr);
|
|
return 0;
|
|
}
|
|
|
|
priv = kzalloc(sizeof(struct adm6996_priv), GFP_KERNEL);
|
|
if (priv == NULL)
|
|
return -ENOMEM;
|
|
|
|
mutex_init(&priv->reg_mutex);
|
|
priv->phydev = pdev;
|
|
priv->read = adm6996_read_mii_reg;
|
|
priv->write = adm6996_write_mii_reg;
|
|
pdev->priv = priv;
|
|
|
|
/* Detect type of chip */
|
|
old = r16(pdev, ADM_VID_CHECK);
|
|
test = old ^ (1 << 12);
|
|
w16(pdev, ADM_VID_CHECK, test);
|
|
test ^= r16(pdev, ADM_VID_CHECK);
|
|
if (test & (1 << 12)) {
|
|
/*
|
|
* Bit 12 of this register is read-only.
|
|
* This is the FC model.
|
|
*/
|
|
priv->model = ADM6996FC;
|
|
} else {
|
|
/* Bit 12 is read-write. This is the M model. */
|
|
priv->model = ADM6996M;
|
|
w16(pdev, ADM_VID_CHECK, old);
|
|
}
|
|
|
|
swdev = &priv->dev;
|
|
swdev->name = (adm6996_model_name[priv->model]);
|
|
swdev->cpu_port = ADM_CPU_PORT;
|
|
swdev->ports = ADM_NUM_PORTS;
|
|
swdev->vlans = ADM_NUM_VLANS;
|
|
swdev->ops = &adm6996_ops;
|
|
|
|
pr_info ("%s: %s model PHY found.\n", pdev->attached_dev->name,
|
|
swdev->name);
|
|
|
|
mutex_lock(&priv->reg_mutex);
|
|
adm6996_perform_reset (priv);
|
|
mutex_unlock(&priv->reg_mutex);
|
|
|
|
if (priv->model == ADM6996M) {
|
|
if ((ret = register_switch(swdev, pdev->attached_dev)) < 0) {
|
|
kfree(priv);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Warning: phydev->priv is NULL if phydev->addr != 0
|
|
*/
|
|
static int adm6996_read_status(struct phy_device *phydev)
|
|
{
|
|
phydev->speed = SPEED_100;
|
|
phydev->duplex = DUPLEX_FULL;
|
|
phydev->link = 1;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Warning: phydev->priv is NULL if phydev->addr != 0
|
|
*/
|
|
static int adm6996_config_aneg(struct phy_device *phydev)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static int adm6996_fixup(struct phy_device *dev)
|
|
{
|
|
struct mii_bus *bus = dev->bus;
|
|
u16 reg;
|
|
|
|
/* Our custom registers are at PHY addresses 0-10. Claim those. */
|
|
if (dev->addr > 10)
|
|
return 0;
|
|
|
|
/* look for the switch on the bus */
|
|
reg = bus->read(bus, PHYADDR(ADM_SIG0)) & ADM_SIG0_MASK;
|
|
if (reg != ADM_SIG0_VAL)
|
|
return 0;
|
|
|
|
reg = bus->read(bus, PHYADDR(ADM_SIG1)) & ADM_SIG1_MASK;
|
|
if (reg != ADM_SIG1_VAL)
|
|
return 0;
|
|
|
|
dev->phy_id = (ADM_SIG0_VAL << 16) | ADM_SIG1_VAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int adm6996_probe(struct phy_device *pdev)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static void adm6996_remove(struct phy_device *pdev)
|
|
{
|
|
struct adm6996_priv *priv = phy_to_adm(pdev);
|
|
|
|
if (priv != NULL && priv->model == ADM6996M)
|
|
unregister_switch(&priv->dev);
|
|
|
|
kfree(priv);
|
|
}
|
|
|
|
|
|
static struct phy_driver adm6996_driver = {
|
|
.name = "Infineon ADM6996",
|
|
.phy_id = (ADM_SIG0_VAL << 16) | ADM_SIG1_VAL,
|
|
.phy_id_mask = 0xffffffff,
|
|
.features = PHY_BASIC_FEATURES,
|
|
.probe = adm6996_probe,
|
|
.remove = adm6996_remove,
|
|
.config_init = &adm6996_config_init,
|
|
.config_aneg = &adm6996_config_aneg,
|
|
.read_status = &adm6996_read_status,
|
|
.driver = { .owner = THIS_MODULE,},
|
|
};
|
|
|
|
static int __init adm6996_init(void)
|
|
{
|
|
phy_register_fixup_for_id(PHY_ANY_ID, adm6996_fixup);
|
|
return phy_driver_register(&adm6996_driver);
|
|
}
|
|
|
|
static void __exit adm6996_exit(void)
|
|
{
|
|
phy_driver_unregister(&adm6996_driver);
|
|
}
|
|
|
|
module_init(adm6996_init);
|
|
module_exit(adm6996_exit);
|