cshore 636113691a [brcm63xx] Fixed Comtrend CT536_CT5621 board settings. These boards are based on the 96348GW-11 reference design but have different GPIOs therefore we use the board fixups now availabed (thanks the patches by Jonas Gorski) to create a separate board entry for these boards and leave the reference design with reference GPIOs. Also these boards only have enet1 (no enet0) so we set that in the board definition, and use a defconfig for a single interface network. ...

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24442 3c298f89-4303-0410-b956-a3cf2f4a3e73

2010-12-10 18:59:58 +00:00

..

imagebuilder

[imagebuilder] allow overriding BIN_DIR (#7412)

2010-10-26 14:15:52 +00:00

linux

[brcm63xx] Fixed Comtrend CT536_CT5621 board settings. These boards are based on the 96348GW-11 reference design but have different GPIOs therefore we use the board fixups now availabed (thanks the patches by Jonas Gorski) to create a separate board entry for these boards and leave the reference design with reference GPIOs. Also these boards only have enet1 (no enet0) so we set that in the board definition, and use a defconfig for a single interface network.

2010-12-10 18:59:58 +00:00

sdk

sdk: fix up paths for $(ARCH_SUFFIX)

2010-03-17 16:03:08 +00:00

toolchain

target/toolchain: fix installation after r22723

2010-09-04 11:56:33 +00:00

Config.in

switch from ext2 to ext4 (w/o) journaling

2010-11-22 12:12:39 +00:00

Makefile

Add a target (CONFIG_MAKE_CONFIG) that creates an exportable toolchain. The toolchain will zipped and saved under $(TOPDIR)/bin directory.

2009-11-14 17:51:32 +00:00