openwrt-xburst/target/linux/lantiq/files-3.3/drivers/spi/spi-falcon.c

/*
 *  This program is free software; you can redistribute it and/or modify it
 *  under the terms of the GNU General Public License version 2 as published
 *  by the Free Software Foundation.
 *
 *  Copyright (C) 2010 Thomas Langer <thomas.langer@lantiq.com>
 */

#include <linux/module.h>
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <linux/delay.h>
#include <linux/workqueue.h>

#include <lantiq_soc.h>

#define DRV_NAME			"falcon_spi"

#define FALCON_SPI_XFER_BEGIN		(1 << 0)
#define FALCON_SPI_XFER_END		(1 << 1)

/* Bus Read Configuration Register0 */
#define LTQ_BUSRCON0	0x00000010
/* Bus Write Configuration Register0 */
#define LTQ_BUSWCON0	0x00000018
/* Serial Flash Configuration Register */
#define LTQ_SFCON	0x00000080
/* Serial Flash Time Register */
#define LTQ_SFTIME	0x00000084
/* Serial Flash Status Register */
#define LTQ_SFSTAT	0x00000088
/* Serial Flash Command Register */
#define LTQ_SFCMD	0x0000008C
/* Serial Flash Address Register */
#define LTQ_SFADDR	0x00000090
/* Serial Flash Data Register */
#define LTQ_SFDATA	0x00000094
/* Serial Flash I/O Control Register */
#define LTQ_SFIO	0x00000098
/* EBU Clock Control Register */
#define LTQ_EBUCC	0x000000C4

/* Dummy Phase Length */
#define SFCMD_DUMLEN_OFFSET	16
#define SFCMD_DUMLEN_MASK	0x000F0000
/* Chip Select */
#define SFCMD_CS_OFFSET		24
#define SFCMD_CS_MASK		0x07000000
/* field offset */
#define SFCMD_ALEN_OFFSET	20
#define SFCMD_ALEN_MASK		0x00700000
/* SCK Rise-edge Position */
#define SFTIME_SCKR_POS_OFFSET	8
#define SFTIME_SCKR_POS_MASK	0x00000F00
/* SCK Period */
#define SFTIME_SCK_PER_OFFSET	0
#define SFTIME_SCK_PER_MASK	0x0000000F
/* SCK Fall-edge Position */
#define SFTIME_SCKF_POS_OFFSET	12
#define SFTIME_SCKF_POS_MASK	0x0000F000
/* Device Size */
#define SFCON_DEV_SIZE_A23_0	0x03000000
#define SFCON_DEV_SIZE_MASK	0x0F000000
/* Read Data Position */
#define SFTIME_RD_POS_MASK	0x000F0000
/* Data Output */
#define SFIO_UNUSED_WD_MASK	0x0000000F
/* Command Opcode mask */
#define SFCMD_OPC_MASK		0x000000FF
/* dlen bytes of data to write */
#define SFCMD_DIR_WRITE		0x00000100
/* Data Length offset */
#define SFCMD_DLEN_OFFSET	9
/* Command Error */
#define SFSTAT_CMD_ERR		0x20000000
/* Access Command Pending */
#define SFSTAT_CMD_PEND		0x00400000
/* Frequency set to 100MHz. */
#define EBUCC_EBUDIV_SELF100	0x00000001
/* Serial Flash */
#define BUSRCON0_AGEN_SERIAL_FLASH	0xF0000000
/* 8-bit multiplexed */
#define BUSRCON0_PORTW_8_BIT_MUX	0x00000000
/* Serial Flash */
#define BUSWCON0_AGEN_SERIAL_FLASH	0xF0000000
/* Chip Select after opcode */
#define SFCMD_KEEP_CS_KEEP_SELECTED	0x00008000

struct falcon_spi {
	u32 sfcmd; /* for caching of opcode, direction, ... */
	struct spi_master *master;
};

int
falcon_spi_xfer(struct spi_device *spi,
		    struct spi_transfer *t,
		    unsigned long flags)
{
	struct device *dev = &spi->dev;
	struct falcon_spi *priv = spi_master_get_devdata(spi->master);
	const u8 *txp = t->tx_buf;
	u8 *rxp = t->rx_buf;
	unsigned int bytelen = ((8 * t->len + 7) / 8);
	unsigned int len, alen, dumlen;
	u32 val;
	enum {
		state_init,
		state_command_prepare,
		state_write,
		state_read,
		state_disable_cs,
		state_end
	} state = state_init;

	do {
		switch (state) {
		case state_init: /* detect phase of upper layer sequence */
		{
			/* initial write ? */
			if (flags & FALCON_SPI_XFER_BEGIN) {
				if (!txp) {
					dev_err(dev,
						"BEGIN without tx data!\n");
					return -1;
				}
				/*
				 * Prepare the parts of the sfcmd register,
				 * which should not
				 * change during a sequence!
				 * Only exception are the length fields,
				 * especially alen and dumlen.
				 */

				priv->sfcmd = ((spi->chip_select
						<< SFCMD_CS_OFFSET)
					       & SFCMD_CS_MASK);
				priv->sfcmd |= SFCMD_KEEP_CS_KEEP_SELECTED;
				priv->sfcmd |= *txp;
				txp++;
				bytelen--;
				if (bytelen) {
					/*
					 * more data:
					 * maybe address and/or dummy
					 */
					state = state_command_prepare;
					break;
				} else {
					dev_dbg(dev, "write cmd %02X\n",
						priv->sfcmd & SFCMD_OPC_MASK);
				}
			}
			/* continued write ? */
			if (txp && bytelen) {
				state = state_write;
				break;
			}
			/* read data? */
			if (rxp && bytelen) {
				state = state_read;
				break;
			}
			/* end of sequence? */
			if (flags & FALCON_SPI_XFER_END)
				state = state_disable_cs;
			else
				state = state_end;
			break;
		}
		/* collect tx data for address and dummy phase */
		case state_command_prepare:
		{
			/* txp is valid, already checked */
			val = 0;
			alen = 0;
			dumlen = 0;
			while (bytelen > 0) {
				if (alen < 3) {
					val = (val<<8)|(*txp++);
					alen++;
				} else if ((dumlen < 15) && (*txp == 0)) {
					/*
					 * assume dummy bytes are set to 0
					 * from upper layer
					 */
					dumlen++;
					txp++;
				} else
					break;
				bytelen--;
			}
			priv->sfcmd &= ~(SFCMD_ALEN_MASK | SFCMD_DUMLEN_MASK);
			priv->sfcmd |= (alen << SFCMD_ALEN_OFFSET) |
					 (dumlen << SFCMD_DUMLEN_OFFSET);
			if (alen > 0)
				ltq_ebu_w32(val, LTQ_SFADDR);

			dev_dbg(dev, "write cmd %02X, alen=%d "
				"(addr=%06X) dumlen=%d\n",
				priv->sfcmd & SFCMD_OPC_MASK,
				alen, val, dumlen);

			if (bytelen > 0) {
				/* continue with write */
				state = state_write;
			} else if (flags & FALCON_SPI_XFER_END) {
				/* end of sequence? */
				state = state_disable_cs;
			} else {
				/*
				 * go to end and expect another
				 * call (read or write)
				 */
				state = state_end;
			}
			break;
		}
		case state_write:
		{
			/* txp still valid */
			priv->sfcmd |= SFCMD_DIR_WRITE;
			len = 0;
			val = 0;
			do {
				if (bytelen--)
					val |= (*txp++) << (8 * len++);
				if ((flags & FALCON_SPI_XFER_END)
				    && (bytelen == 0)) {
					priv->sfcmd &=
						~SFCMD_KEEP_CS_KEEP_SELECTED;
				}
				if ((len == 4) || (bytelen == 0)) {
					ltq_ebu_w32(val, LTQ_SFDATA);
					ltq_ebu_w32(priv->sfcmd
						| (len<<SFCMD_DLEN_OFFSET),
						LTQ_SFCMD);
					len = 0;
					val = 0;
					priv->sfcmd &= ~(SFCMD_ALEN_MASK
							 | SFCMD_DUMLEN_MASK);
				}
			} while (bytelen);
			state = state_end;
			break;
		}
		case state_read:
		{
			/* read data */
			priv->sfcmd &= ~SFCMD_DIR_WRITE;
			do {
				if ((flags & FALCON_SPI_XFER_END)
				    && (bytelen <= 4)) {
					priv->sfcmd &=
						~SFCMD_KEEP_CS_KEEP_SELECTED;
				}
				len = (bytelen > 4) ? 4 : bytelen;
				bytelen -= len;
				ltq_ebu_w32(priv->sfcmd
					|(len<<SFCMD_DLEN_OFFSET), LTQ_SFCMD);
				priv->sfcmd &= ~(SFCMD_ALEN_MASK
						 | SFCMD_DUMLEN_MASK);
				do {
					val = ltq_ebu_r32(LTQ_SFSTAT);
					if (val & SFSTAT_CMD_ERR) {
						/* reset error status */
						dev_err(dev, "SFSTAT: CMD_ERR "
							"(%x)\n", val);
						ltq_ebu_w32(SFSTAT_CMD_ERR,
							LTQ_SFSTAT);
						return -1;
					}
				} while (val & SFSTAT_CMD_PEND);
				val = ltq_ebu_r32(LTQ_SFDATA);
				do {
					*rxp = (val & 0xFF);
					rxp++;
					val >>= 8;
					len--;
				} while (len);
			} while (bytelen);
			state = state_end;
			break;
		}
		case state_disable_cs:
		{
			priv->sfcmd &= ~SFCMD_KEEP_CS_KEEP_SELECTED;
			ltq_ebu_w32(priv->sfcmd | (0 << SFCMD_DLEN_OFFSET),
				LTQ_SFCMD);
			val = ltq_ebu_r32(LTQ_SFSTAT);
			if (val & SFSTAT_CMD_ERR) {
				/* reset error status */
				dev_err(dev, "SFSTAT: CMD_ERR (%x)\n", val);
				ltq_ebu_w32(SFSTAT_CMD_ERR, LTQ_SFSTAT);
				return -1;
			}
			state = state_end;
			break;
		}
		case state_end:
			break;
		}
	} while (state != state_end);

	return 0;
}

static int
falcon_spi_setup(struct spi_device *spi)
{
	struct device *dev = &spi->dev;
	const u32 ebuclk = 100000000;
	unsigned int i;
	unsigned long flags;

	dev_dbg(dev, "setup\n");

	if (spi->master->bus_num > 0 || spi->chip_select > 0)
		return -ENODEV;

	spin_lock_irqsave(&ebu_lock, flags);

	if (ebuclk < spi->max_speed_hz) {
		/* set EBU clock to 100 MHz */
		ltq_sys1_w32_mask(0, EBUCC_EBUDIV_SELF100, LTQ_EBUCC);
		i = 1; /* divider */
	} else {
		/* set EBU clock to 50 MHz */
		ltq_sys1_w32_mask(EBUCC_EBUDIV_SELF100, 0, LTQ_EBUCC);

		/* search for suitable divider */
		for (i = 1; i < 7; i++) {
			if (ebuclk / i <= spi->max_speed_hz)
				break;
		}
	}

	/* setup period of serial clock */
	ltq_ebu_w32_mask(SFTIME_SCKF_POS_MASK
		     | SFTIME_SCKR_POS_MASK
		     | SFTIME_SCK_PER_MASK,
		     (i << SFTIME_SCKR_POS_OFFSET)
		     | (i << (SFTIME_SCK_PER_OFFSET + 1)),
		     LTQ_SFTIME);

	/*
	 * set some bits of unused_wd, to not trigger HOLD/WP
	 * signals on non QUAD flashes
	 */
	ltq_ebu_w32((SFIO_UNUSED_WD_MASK & (0x8 | 0x4)), LTQ_SFIO);

	ltq_ebu_w32(BUSRCON0_AGEN_SERIAL_FLASH | BUSRCON0_PORTW_8_BIT_MUX,
		LTQ_BUSRCON0);
	ltq_ebu_w32(BUSWCON0_AGEN_SERIAL_FLASH, LTQ_BUSWCON0);
	/* set address wrap around to maximum for 24-bit addresses */
	ltq_ebu_w32_mask(SFCON_DEV_SIZE_MASK, SFCON_DEV_SIZE_A23_0, LTQ_SFCON);

	spin_unlock_irqrestore(&ebu_lock, flags);

	return 0;
}

static int
falcon_spi_transfer(struct spi_device *spi, struct spi_message *m)
{
	struct falcon_spi *priv = spi_master_get_devdata(spi->master);
	struct spi_transfer *t;
	unsigned long spi_flags;
	unsigned long flags;
	int ret = 0;

	priv->sfcmd = 0;
	m->actual_length = 0;

	spi_flags = FALCON_SPI_XFER_BEGIN;
	list_for_each_entry(t, &m->transfers, transfer_list) {
		if (list_is_last(&t->transfer_list, &m->transfers))
			spi_flags |= FALCON_SPI_XFER_END;

		spin_lock_irqsave(&ebu_lock, flags);
		ret = falcon_spi_xfer(spi, t, spi_flags);
		spin_unlock_irqrestore(&ebu_lock, flags);

		if (ret)
			break;

		m->actual_length += t->len;

		if (t->delay_usecs || t->cs_change)
			BUG();

		spi_flags = 0;
	}

	m->status = ret;
	m->complete(m->context);

	return 0;
}

static void
falcon_spi_cleanup(struct spi_device *spi)
{
	struct device *dev = &spi->dev;

	dev_dbg(dev, "cleanup\n");
}

static int __devinit
falcon_spi_probe(struct platform_device *pdev)
{
	struct device *dev = &pdev->dev;
	struct falcon_spi *priv;
	struct spi_master *master;
	int ret;

	dev_dbg(dev, "probing\n");

	master = spi_alloc_master(&pdev->dev, sizeof(*priv));
	if (!master) {
		dev_err(dev, "no memory for spi_master\n");
		return -ENOMEM;
	}

	priv = spi_master_get_devdata(master);
	priv->master = master;

	master->mode_bits = SPI_MODE_3;
	master->num_chipselect = 1;
	master->bus_num = 0;

	master->setup = falcon_spi_setup;
	master->transfer = falcon_spi_transfer;
	master->cleanup = falcon_spi_cleanup;

	platform_set_drvdata(pdev, priv);

	ret = spi_register_master(master);
	if (ret)
		spi_master_put(master);

	return ret;
}

static int __devexit
falcon_spi_remove(struct platform_device *pdev)
{
	struct device *dev = &pdev->dev;
	struct falcon_spi *priv = platform_get_drvdata(pdev);

	dev_dbg(dev, "removed\n");

	spi_unregister_master(priv->master);

	return 0;
}

static struct platform_driver falcon_spi_driver = {
	.probe	= falcon_spi_probe,
	.remove	= __devexit_p(falcon_spi_remove),
	.driver = {
		.name	= DRV_NAME,
		.owner	= THIS_MODULE
	}
};

static int __init
falcon_spi_init(void)
{
	return platform_driver_register(&falcon_spi_driver);
}

static void __exit
falcon_spi_exit(void)
{
	platform_driver_unregister(&falcon_spi_driver);
}

module_init(falcon_spi_init);
module_exit(falcon_spi_exit);

MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Lantiq Falcon SPI controller driver");