mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-08-22 06:41:31 +03:00
* backport 2.6.8 patches to .39 / .32.33 * remove lqtapi * bump tapi/dsl to .39 * migrate to new ltq_ style api * add amazon_se support git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27026 3c298f89-4303-0410-b956-a3cf2f4a3e73
1104 lines
29 KiB
Diff
1104 lines
29 KiB
Diff
From: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
|
|
Date: Thu, 3 Mar 2011 17:15:30 +0000 (+0100)
|
|
Subject: SPI: lantiq: Add driver for Lantiq SoC SPI controller
|
|
X-Git-Url: http://nbd.name/gitweb.cgi?p=lantiq.git;a=commitdiff_plain;h=653c95b8b9066c9c6ac08bd64d0ceee439e9fd90;hp=3d21b04682ae8eb1c1965aba39d1796e8c5ad84b
|
|
|
|
SPI: lantiq: Add driver for Lantiq SoC SPI controller
|
|
|
|
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
|
|
---
|
|
|
|
--- a/drivers/spi/Kconfig
|
|
+++ b/drivers/spi/Kconfig
|
|
@@ -133,6 +133,14 @@
|
|
This enables using the Freescale i.MX SPI controllers in master
|
|
mode.
|
|
|
|
+config SPI_LANTIQ
|
|
+ tristate "Lantiq SoC SPI controller"
|
|
+ depends on SOC_LANTIQ_XWAY
|
|
+ select SPI_BITBANG
|
|
+ help
|
|
+ This driver supports the Lantiq SoC SPI controller in master
|
|
+ mode.
|
|
+
|
|
config SPI_LM70_LLP
|
|
tristate "Parallel port adapter for LM70 eval board (DEVELOPMENT)"
|
|
depends on PARPORT && EXPERIMENTAL
|
|
--- a/drivers/spi/Makefile
|
|
+++ b/drivers/spi/Makefile
|
|
@@ -20,6 +20,7 @@
|
|
obj-$(CONFIG_SPI_GPIO) += spi_gpio.o
|
|
obj-$(CONFIG_SPI_GPIO_OLD) += spi_gpio_old.o
|
|
obj-$(CONFIG_SPI_IMX) += spi_imx.o
|
|
+obj-$(CONFIG_SPI_LANTIQ) += spi_lantiq.o
|
|
obj-$(CONFIG_SPI_LM70_LLP) += spi_lm70llp.o
|
|
obj-$(CONFIG_SPI_PXA2XX) += pxa2xx_spi.o
|
|
obj-$(CONFIG_SPI_OMAP_UWIRE) += omap_uwire.o
|
|
--- /dev/null
|
|
+++ b/drivers/spi/spi_lantiq.c
|
|
@@ -0,0 +1,1063 @@
|
|
+/*
|
|
+ * Lantiq SoC SPI controller
|
|
+ *
|
|
+ * Copyright (C) 2011 Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
|
|
+ *
|
|
+ * This program is free software; you can distribute it and/or modify it
|
|
+ * under the terms of the GNU General Public License (Version 2) as
|
|
+ * published by the Free Software Foundation.
|
|
+ */
|
|
+
|
|
+#include <linux/init.h>
|
|
+#include <linux/module.h>
|
|
+#include <linux/workqueue.h>
|
|
+#include <linux/platform_device.h>
|
|
+#include <linux/io.h>
|
|
+#include <linux/sched.h>
|
|
+#include <linux/delay.h>
|
|
+#include <linux/interrupt.h>
|
|
+#include <linux/completion.h>
|
|
+#include <linux/spinlock.h>
|
|
+#include <linux/err.h>
|
|
+#include <linux/clk.h>
|
|
+#include <linux/gpio.h>
|
|
+#include <linux/spi/spi.h>
|
|
+#include <linux/spi/spi_bitbang.h>
|
|
+
|
|
+#include <xway.h>
|
|
+#include <xway_irq.h>
|
|
+#include <lantiq_platform.h>
|
|
+
|
|
+#define LTQ_SPI_CLC 0x00 /* Clock control */
|
|
+#define LTQ_SPI_PISEL 0x04 /* Port input select */
|
|
+#define LTQ_SPI_ID 0x08 /* Identification */
|
|
+#define LTQ_SPI_CON 0x10 /* Control */
|
|
+#define LTQ_SPI_STAT 0x14 /* Status */
|
|
+#define LTQ_SPI_WHBSTATE 0x18 /* Write HW modified state */
|
|
+#define LTQ_SPI_TB 0x20 /* Transmit buffer */
|
|
+#define LTQ_SPI_RB 0x24 /* Receive buffer */
|
|
+#define LTQ_SPI_RXFCON 0x30 /* Receive FIFO control */
|
|
+#define LTQ_SPI_TXFCON 0x34 /* Transmit FIFO control */
|
|
+#define LTQ_SPI_FSTAT 0x38 /* FIFO status */
|
|
+#define LTQ_SPI_BRT 0x40 /* Baudrate timer */
|
|
+#define LTQ_SPI_BRSTAT 0x44 /* Baudrate timer status */
|
|
+#define LTQ_SPI_SFCON 0x60 /* Serial frame control */
|
|
+#define LTQ_SPI_SFSTAT 0x64 /* Serial frame status */
|
|
+#define LTQ_SPI_GPOCON 0x70 /* General purpose output control */
|
|
+#define LTQ_SPI_GPOSTAT 0x74 /* General purpose output status */
|
|
+#define LTQ_SPI_FGPO 0x78 /* Forced general purpose output */
|
|
+#define LTQ_SPI_RXREQ 0x80 /* Receive request */
|
|
+#define LTQ_SPI_RXCNT 0x84 /* Receive count */
|
|
+#define LTQ_SPI_DMACON 0xEC /* DMA control */
|
|
+#define LTQ_SPI_IRNEN 0xF4 /* Interrupt node enable */
|
|
+#define LTQ_SPI_IRNICR 0xF8 /* Interrupt node interrupt capture */
|
|
+#define LTQ_SPI_IRNCR 0xFC /* Interrupt node control */
|
|
+
|
|
+#define LTQ_SPI_CLC_SMC_SHIFT 16 /* Clock divider for sleep mode */
|
|
+#define LTQ_SPI_CLC_SMC_MASK 0xFF
|
|
+#define LTQ_SPI_CLC_RMC_SHIFT 8 /* Clock divider for normal run mode */
|
|
+#define LTQ_SPI_CLC_RMC_MASK 0xFF
|
|
+#define LTQ_SPI_CLC_DISS BIT(1) /* Disable status bit */
|
|
+#define LTQ_SPI_CLC_DISR BIT(0) /* Disable request bit */
|
|
+
|
|
+#define LTQ_SPI_ID_TXFS_SHIFT 24 /* Implemented TX FIFO size */
|
|
+#define LTQ_SPI_ID_TXFS_MASK 0x3F
|
|
+#define LTQ_SPI_ID_RXFS_SHIFT 16 /* Implemented RX FIFO size */
|
|
+#define LTQ_SPI_ID_RXFS_MASK 0x3F
|
|
+#define LTQ_SPI_ID_REV_MASK 0x1F /* Hardware revision number */
|
|
+#define LTQ_SPI_ID_CFG BIT(5) /* DMA interface support */
|
|
+
|
|
+#define LTQ_SPI_CON_BM_SHIFT 16 /* Data width selection */
|
|
+#define LTQ_SPI_CON_BM_MASK 0x1F
|
|
+#define LTQ_SPI_CON_EM BIT(24) /* Echo mode */
|
|
+#define LTQ_SPI_CON_IDLE BIT(23) /* Idle bit value */
|
|
+#define LTQ_SPI_CON_ENBV BIT(22) /* Enable byte valid control */
|
|
+#define LTQ_SPI_CON_RUEN BIT(12) /* Receive underflow error enable */
|
|
+#define LTQ_SPI_CON_TUEN BIT(11) /* Transmit underflow error enable */
|
|
+#define LTQ_SPI_CON_AEN BIT(10) /* Abort error enable */
|
|
+#define LTQ_SPI_CON_REN BIT(9) /* Receive overflow error enable */
|
|
+#define LTQ_SPI_CON_TEN BIT(8) /* Transmit overflow error enable */
|
|
+#define LTQ_SPI_CON_LB BIT(7) /* Loopback control */
|
|
+#define LTQ_SPI_CON_PO BIT(6) /* Clock polarity control */
|
|
+#define LTQ_SPI_CON_PH BIT(5) /* Clock phase control */
|
|
+#define LTQ_SPI_CON_HB BIT(4) /* Heading control */
|
|
+#define LTQ_SPI_CON_RXOFF BIT(1) /* Switch receiver off */
|
|
+#define LTQ_SPI_CON_TXOFF BIT(0) /* Switch transmitter off */
|
|
+
|
|
+#define LTQ_SPI_STAT_RXBV_MASK 0x7
|
|
+#define LTQ_SPI_STAT_RXBV_SHIFT 28
|
|
+#define LTQ_SPI_STAT_BSY BIT(13) /* Busy flag */
|
|
+#define LTQ_SPI_STAT_RUE BIT(12) /* Receive underflow error flag */
|
|
+#define LTQ_SPI_STAT_TUE BIT(11) /* Transmit underflow error flag */
|
|
+#define LTQ_SPI_STAT_AE BIT(10) /* Abort error flag */
|
|
+#define LTQ_SPI_STAT_RE BIT(9) /* Receive error flag */
|
|
+#define LTQ_SPI_STAT_TE BIT(8) /* Transmit error flag */
|
|
+#define LTQ_SPI_STAT_MS BIT(1) /* Master/slave select bit */
|
|
+#define LTQ_SPI_STAT_EN BIT(0) /* Enable bit */
|
|
+
|
|
+#define LTQ_SPI_WHBSTATE_SETTUE BIT(15) /* Set transmit underflow error flag */
|
|
+#define LTQ_SPI_WHBSTATE_SETAE BIT(14) /* Set abort error flag */
|
|
+#define LTQ_SPI_WHBSTATE_SETRE BIT(13) /* Set receive error flag */
|
|
+#define LTQ_SPI_WHBSTATE_SETTE BIT(12) /* Set transmit error flag */
|
|
+#define LTQ_SPI_WHBSTATE_CLRTUE BIT(11) /* Clear transmit underflow error flag */
|
|
+#define LTQ_SPI_WHBSTATE_CLRAE BIT(10) /* Clear abort error flag */
|
|
+#define LTQ_SPI_WHBSTATE_CLRRE BIT(9) /* Clear receive error flag */
|
|
+#define LTQ_SPI_WHBSTATE_CLRTE BIT(8) /* Clear transmit error flag */
|
|
+#define LTQ_SPI_WHBSTATE_SETME BIT(7) /* Set mode error flag */
|
|
+#define LTQ_SPI_WHBSTATE_CLRME BIT(6) /* Clear mode error flag */
|
|
+#define LTQ_SPI_WHBSTATE_SETRUE BIT(5) /* Set receive underflow error flag */
|
|
+#define LTQ_SPI_WHBSTATE_CLRRUE BIT(4) /* Clear receive underflow error flag */
|
|
+#define LTQ_SPI_WHBSTATE_SETMS BIT(3) /* Set master select bit */
|
|
+#define LTQ_SPI_WHBSTATE_CLRMS BIT(2) /* Clear master select bit */
|
|
+#define LTQ_SPI_WHBSTATE_SETEN BIT(1) /* Set enable bit (operational mode) */
|
|
+#define LTQ_SPI_WHBSTATE_CLREN BIT(0) /* Clear enable bit (config mode */
|
|
+#define LTQ_SPI_WHBSTATE_CLR_ERRORS 0x0F50
|
|
+
|
|
+#define LTQ_SPI_RXFCON_RXFITL_SHIFT 8 /* FIFO interrupt trigger level */
|
|
+#define LTQ_SPI_RXFCON_RXFITL_MASK 0x3F
|
|
+#define LTQ_SPI_RXFCON_RXFLU BIT(1) /* FIFO flush */
|
|
+#define LTQ_SPI_RXFCON_RXFEN BIT(0) /* FIFO enable */
|
|
+
|
|
+#define LTQ_SPI_TXFCON_TXFITL_SHIFT 8 /* FIFO interrupt trigger level */
|
|
+#define LTQ_SPI_TXFCON_TXFITL_MASK 0x3F
|
|
+#define LTQ_SPI_TXFCON_TXFLU BIT(1) /* FIFO flush */
|
|
+#define LTQ_SPI_TXFCON_TXFEN BIT(0) /* FIFO enable */
|
|
+
|
|
+#define LTQ_SPI_FSTAT_RXFFL_MASK 0x3f
|
|
+#define LTQ_SPI_FSTAT_RXFFL_SHIFT 0
|
|
+#define LTQ_SPI_FSTAT_TXFFL_MASK 0x3f
|
|
+#define LTQ_SPI_FSTAT_TXFFL_SHIFT 8
|
|
+
|
|
+#define LTQ_SPI_GPOCON_ISCSBN_SHIFT 8
|
|
+#define LTQ_SPI_GPOCON_INVOUTN_SHIFT 0
|
|
+
|
|
+#define LTQ_SPI_FGPO_SETOUTN_SHIFT 8
|
|
+#define LTQ_SPI_FGPO_CLROUTN_SHIFT 0
|
|
+
|
|
+#define LTQ_SPI_RXREQ_RXCNT_MASK 0xFFFF /* Receive count value */
|
|
+#define LTQ_SPI_RXCNT_TODO_MASK 0xFFFF /* Recevie to-do value */
|
|
+
|
|
+#define LTQ_SPI_IRNEN_F BIT(3) /* Frame end interrupt request */
|
|
+#define LTQ_SPI_IRNEN_E BIT(2) /* Error end interrupt request */
|
|
+#define LTQ_SPI_IRNEN_T BIT(1) /* Transmit end interrupt request */
|
|
+#define LTQ_SPI_IRNEN_R BIT(0) /* Receive end interrupt request */
|
|
+#define LTQ_SPI_IRNEN_ALL 0xF
|
|
+
|
|
+/* Hard-wired GPIOs used by SPI controller */
|
|
+#define LTQ_SPI_GPIO_DI 16
|
|
+#define LTQ_SPI_GPIO_DO 17
|
|
+#define LTQ_SPI_GPIO_CLK 18
|
|
+
|
|
+struct ltq_spi {
|
|
+ struct spi_bitbang bitbang;
|
|
+ struct completion done;
|
|
+ spinlock_t lock;
|
|
+
|
|
+ struct device *dev;
|
|
+ void __iomem *base;
|
|
+ struct clk *clk;
|
|
+
|
|
+ int status;
|
|
+ int irq[3];
|
|
+
|
|
+ const u8 *tx;
|
|
+ u8 *rx;
|
|
+ u32 tx_cnt;
|
|
+ u32 rx_cnt;
|
|
+ u32 len;
|
|
+ struct spi_transfer *curr_transfer;
|
|
+
|
|
+ u32 (*get_tx) (struct ltq_spi *);
|
|
+
|
|
+ u16 txfs;
|
|
+ u16 rxfs;
|
|
+ unsigned dma_support:1;
|
|
+ unsigned cfg_mode:1;
|
|
+
|
|
+};
|
|
+
|
|
+struct ltq_spi_controller_state {
|
|
+ void (*cs_activate) (struct spi_device *);
|
|
+ void (*cs_deactivate) (struct spi_device *);
|
|
+};
|
|
+
|
|
+struct ltq_spi_irq_map {
|
|
+ char *name;
|
|
+ irq_handler_t handler;
|
|
+};
|
|
+
|
|
+struct ltq_spi_cs_gpio_map {
|
|
+ unsigned gpio;
|
|
+ unsigned altsel0;
|
|
+ unsigned altsel1;
|
|
+};
|
|
+
|
|
+static inline struct ltq_spi *ltq_spi_to_hw(struct spi_device *spi)
|
|
+{
|
|
+ return spi_master_get_devdata(spi->master);
|
|
+}
|
|
+
|
|
+static inline u32 ltq_spi_reg_read(struct ltq_spi *hw, u32 reg)
|
|
+{
|
|
+ return ioread32be(hw->base + reg);
|
|
+}
|
|
+
|
|
+static inline void ltq_spi_reg_write(struct ltq_spi *hw, u32 val, u32 reg)
|
|
+{
|
|
+ iowrite32be(val, hw->base + reg);
|
|
+}
|
|
+
|
|
+static inline void ltq_spi_reg_setbit(struct ltq_spi *hw, u32 bits, u32 reg)
|
|
+{
|
|
+ u32 val;
|
|
+
|
|
+ val = ltq_spi_reg_read(hw, reg);
|
|
+ val |= bits;
|
|
+ ltq_spi_reg_write(hw, val, reg);
|
|
+}
|
|
+
|
|
+static inline void ltq_spi_reg_clearbit(struct ltq_spi *hw, u32 bits, u32 reg)
|
|
+{
|
|
+ u32 val;
|
|
+
|
|
+ val = ltq_spi_reg_read(hw, reg);
|
|
+ val &= ~bits;
|
|
+ ltq_spi_reg_write(hw, val, reg);
|
|
+}
|
|
+
|
|
+static void ltq_spi_hw_enable(struct ltq_spi *hw)
|
|
+{
|
|
+ u32 clc;
|
|
+
|
|
+ /* Power-up mdule */
|
|
+ ltq_pmu_enable(PMU_SPI);
|
|
+
|
|
+ /*
|
|
+ * Set clock divider for run mode to 1 to
|
|
+ * run at same frequency as FPI bus
|
|
+ */
|
|
+ clc = (1 << LTQ_SPI_CLC_RMC_SHIFT);
|
|
+ ltq_spi_reg_write(hw, clc, LTQ_SPI_CLC);
|
|
+}
|
|
+
|
|
+static void ltq_spi_hw_disable(struct ltq_spi *hw)
|
|
+{
|
|
+ /* Set clock divider to 0 and set module disable bit */
|
|
+ ltq_spi_reg_write(hw, LTQ_SPI_CLC_DISS, LTQ_SPI_CLC);
|
|
+
|
|
+ /* Power-down mdule */
|
|
+ ltq_pmu_disable(PMU_SPI);
|
|
+}
|
|
+
|
|
+static void ltq_spi_reset_fifos(struct ltq_spi *hw)
|
|
+{
|
|
+ u32 val;
|
|
+
|
|
+ /*
|
|
+ * Enable and flush FIFOs. Set interrupt trigger level to
|
|
+ * half of FIFO count implemented in hardware.
|
|
+ */
|
|
+ if (hw->txfs > 1) {
|
|
+ val = hw->txfs << (LTQ_SPI_TXFCON_TXFITL_SHIFT - 1);
|
|
+ val |= LTQ_SPI_TXFCON_TXFEN | LTQ_SPI_TXFCON_TXFLU;
|
|
+ ltq_spi_reg_write(hw, val, LTQ_SPI_TXFCON);
|
|
+ }
|
|
+
|
|
+ if (hw->rxfs > 1) {
|
|
+ val = hw->rxfs << (LTQ_SPI_RXFCON_RXFITL_SHIFT - 1);
|
|
+ val |= LTQ_SPI_RXFCON_RXFEN | LTQ_SPI_RXFCON_RXFLU;
|
|
+ ltq_spi_reg_write(hw, val, LTQ_SPI_RXFCON);
|
|
+ }
|
|
+}
|
|
+
|
|
+static inline int ltq_spi_wait_ready(struct ltq_spi *hw)
|
|
+{
|
|
+ u32 stat;
|
|
+ unsigned long timeout;
|
|
+
|
|
+ timeout = jiffies + msecs_to_jiffies(200);
|
|
+
|
|
+ do {
|
|
+ stat = ltq_spi_reg_read(hw, LTQ_SPI_STAT);
|
|
+ if (!(stat & LTQ_SPI_STAT_BSY))
|
|
+ return 0;
|
|
+
|
|
+ cond_resched();
|
|
+ } while (!time_after_eq(jiffies, timeout));
|
|
+
|
|
+ dev_err(hw->dev, "SPI wait ready timed out\n");
|
|
+
|
|
+ return -ETIMEDOUT;
|
|
+}
|
|
+
|
|
+static void ltq_spi_config_mode_set(struct ltq_spi *hw)
|
|
+{
|
|
+ if (hw->cfg_mode)
|
|
+ return;
|
|
+
|
|
+ /*
|
|
+ * Putting the SPI module in config mode is only safe if no
|
|
+ * transfer is in progress as indicated by busy flag STATE.BSY.
|
|
+ */
|
|
+ if (ltq_spi_wait_ready(hw)) {
|
|
+ ltq_spi_reset_fifos(hw);
|
|
+ hw->status = -ETIMEDOUT;
|
|
+ }
|
|
+ ltq_spi_reg_write(hw, LTQ_SPI_WHBSTATE_CLREN, LTQ_SPI_WHBSTATE);
|
|
+
|
|
+ hw->cfg_mode = 1;
|
|
+}
|
|
+
|
|
+static void ltq_spi_run_mode_set(struct ltq_spi *hw)
|
|
+{
|
|
+ if (!hw->cfg_mode)
|
|
+ return;
|
|
+
|
|
+ ltq_spi_reg_write(hw, LTQ_SPI_WHBSTATE_SETEN, LTQ_SPI_WHBSTATE);
|
|
+
|
|
+ hw->cfg_mode = 0;
|
|
+}
|
|
+
|
|
+static u32 ltq_spi_tx_word_u8(struct ltq_spi *hw)
|
|
+{
|
|
+ const u8 *tx = hw->tx;
|
|
+ u32 data = *tx++;
|
|
+
|
|
+ hw->tx_cnt++;
|
|
+ hw->tx++;
|
|
+
|
|
+ return data;
|
|
+}
|
|
+
|
|
+static u32 ltq_spi_tx_word_u16(struct ltq_spi *hw)
|
|
+{
|
|
+ const u16 *tx = (u16 *) hw->tx;
|
|
+ u32 data = *tx++;
|
|
+
|
|
+ hw->tx_cnt += 2;
|
|
+ hw->tx += 2;
|
|
+
|
|
+ return data;
|
|
+}
|
|
+
|
|
+static u32 ltq_spi_tx_word_u32(struct ltq_spi *hw)
|
|
+{
|
|
+ const u32 *tx = (u32 *) hw->tx;
|
|
+ u32 data = *tx++;
|
|
+
|
|
+ hw->tx_cnt += 4;
|
|
+ hw->tx += 4;
|
|
+
|
|
+ return data;
|
|
+}
|
|
+
|
|
+static void ltq_spi_bits_per_word_set(struct spi_device *spi)
|
|
+{
|
|
+ struct ltq_spi *hw = ltq_spi_to_hw(spi);
|
|
+ u32 bm;
|
|
+ u8 bits_per_word = spi->bits_per_word;
|
|
+
|
|
+ /*
|
|
+ * Use either default value of SPI device or value
|
|
+ * from current transfer.
|
|
+ */
|
|
+ if (hw->curr_transfer && hw->curr_transfer->bits_per_word)
|
|
+ bits_per_word = hw->curr_transfer->bits_per_word;
|
|
+
|
|
+ if (bits_per_word <= 8)
|
|
+ hw->get_tx = ltq_spi_tx_word_u8;
|
|
+ else if (bits_per_word <= 16)
|
|
+ hw->get_tx = ltq_spi_tx_word_u16;
|
|
+ else if (bits_per_word <= 32)
|
|
+ hw->get_tx = ltq_spi_tx_word_u32;
|
|
+
|
|
+ /* CON.BM value = bits_per_word - 1 */
|
|
+ bm = (bits_per_word - 1) << LTQ_SPI_CON_BM_SHIFT;
|
|
+
|
|
+ ltq_spi_reg_clearbit(hw, LTQ_SPI_CON_BM_MASK <<
|
|
+ LTQ_SPI_CON_BM_SHIFT, LTQ_SPI_CON);
|
|
+ ltq_spi_reg_setbit(hw, bm, LTQ_SPI_CON);
|
|
+}
|
|
+
|
|
+static void ltq_spi_speed_set(struct spi_device *spi)
|
|
+{
|
|
+ struct ltq_spi *hw = ltq_spi_to_hw(spi);
|
|
+ u32 br, max_speed_hz, spi_clk;
|
|
+ u32 speed_hz = spi->max_speed_hz;
|
|
+
|
|
+ /*
|
|
+ * Use either default value of SPI device or value
|
|
+ * from current transfer.
|
|
+ */
|
|
+ if (hw->curr_transfer && hw->curr_transfer->speed_hz)
|
|
+ speed_hz = hw->curr_transfer->speed_hz;
|
|
+
|
|
+ /*
|
|
+ * SPI module clock is derived from FPI bus clock dependent on
|
|
+ * divider value in CLC.RMS which is always set to 1.
|
|
+ */
|
|
+ spi_clk = clk_get_rate(hw->clk);
|
|
+
|
|
+ /*
|
|
+ * Maximum SPI clock frequency in master mode is half of
|
|
+ * SPI module clock frequency. Maximum reload value of
|
|
+ * baudrate generator BR is 2^16.
|
|
+ */
|
|
+ max_speed_hz = spi_clk / 2;
|
|
+ if (speed_hz >= max_speed_hz)
|
|
+ br = 0;
|
|
+ else
|
|
+ br = (max_speed_hz / speed_hz) - 1;
|
|
+
|
|
+ if (br > 0xFFFF)
|
|
+ br = 0xFFFF;
|
|
+
|
|
+ ltq_spi_reg_write(hw, br, LTQ_SPI_BRT);
|
|
+}
|
|
+
|
|
+static void ltq_spi_clockmode_set(struct spi_device *spi)
|
|
+{
|
|
+ struct ltq_spi *hw = ltq_spi_to_hw(spi);
|
|
+ u32 con;
|
|
+
|
|
+ con = ltq_spi_reg_read(hw, LTQ_SPI_CON);
|
|
+
|
|
+ /*
|
|
+ * SPI mode mapping in CON register:
|
|
+ * Mode CPOL CPHA CON.PO CON.PH
|
|
+ * 0 0 0 0 1
|
|
+ * 1 0 1 0 0
|
|
+ * 2 1 0 1 1
|
|
+ * 3 1 1 1 0
|
|
+ */
|
|
+ if (spi->mode & SPI_CPHA)
|
|
+ con &= ~LTQ_SPI_CON_PH;
|
|
+ else
|
|
+ con |= LTQ_SPI_CON_PH;
|
|
+
|
|
+ if (spi->mode & SPI_CPOL)
|
|
+ con |= LTQ_SPI_CON_PO;
|
|
+ else
|
|
+ con &= ~LTQ_SPI_CON_PO;
|
|
+
|
|
+ /* Set heading control */
|
|
+ if (spi->mode & SPI_LSB_FIRST)
|
|
+ con &= ~LTQ_SPI_CON_HB;
|
|
+ else
|
|
+ con |= LTQ_SPI_CON_HB;
|
|
+
|
|
+ ltq_spi_reg_write(hw, con, LTQ_SPI_CON);
|
|
+}
|
|
+
|
|
+static void ltq_spi_xmit_set(struct ltq_spi *hw, struct spi_transfer *t)
|
|
+{
|
|
+ u32 con;
|
|
+
|
|
+ con = ltq_spi_reg_read(hw, LTQ_SPI_CON);
|
|
+
|
|
+ if (t) {
|
|
+ if (t->tx_buf && t->rx_buf) {
|
|
+ con &= ~(LTQ_SPI_CON_TXOFF | LTQ_SPI_CON_RXOFF);
|
|
+ } else if (t->rx_buf) {
|
|
+ con &= ~LTQ_SPI_CON_RXOFF;
|
|
+ con |= LTQ_SPI_CON_TXOFF;
|
|
+ } else if (t->tx_buf) {
|
|
+ con &= ~LTQ_SPI_CON_TXOFF;
|
|
+ con |= LTQ_SPI_CON_RXOFF;
|
|
+ }
|
|
+ } else
|
|
+ con |= (LTQ_SPI_CON_TXOFF | LTQ_SPI_CON_RXOFF);
|
|
+
|
|
+ ltq_spi_reg_write(hw, con, LTQ_SPI_CON);
|
|
+}
|
|
+
|
|
+static void ltq_spi_gpio_cs_activate(struct spi_device *spi)
|
|
+{
|
|
+ struct ltq_spi_controller_data *cdata = spi->controller_data;
|
|
+ int val = spi->mode & SPI_CS_HIGH ? 1 : 0;
|
|
+
|
|
+ gpio_set_value(cdata->gpio, val);
|
|
+}
|
|
+
|
|
+static void ltq_spi_gpio_cs_deactivate(struct spi_device *spi)
|
|
+{
|
|
+ struct ltq_spi_controller_data *cdata = spi->controller_data;
|
|
+ int val = spi->mode & SPI_CS_HIGH ? 0 : 1;
|
|
+
|
|
+ gpio_set_value(cdata->gpio, val);
|
|
+}
|
|
+
|
|
+static void ltq_spi_internal_cs_activate(struct spi_device *spi)
|
|
+{
|
|
+ struct ltq_spi *hw = ltq_spi_to_hw(spi);
|
|
+ u32 fgpo;
|
|
+
|
|
+ fgpo = (1 << (spi->chip_select + LTQ_SPI_FGPO_CLROUTN_SHIFT));
|
|
+ ltq_spi_reg_setbit(hw, fgpo, LTQ_SPI_FGPO);
|
|
+}
|
|
+
|
|
+static void ltq_spi_internal_cs_deactivate(struct spi_device *spi)
|
|
+{
|
|
+ struct ltq_spi *hw = ltq_spi_to_hw(spi);
|
|
+ u32 fgpo;
|
|
+
|
|
+ fgpo = (1 << (spi->chip_select + LTQ_SPI_FGPO_SETOUTN_SHIFT));
|
|
+ ltq_spi_reg_setbit(hw, fgpo, LTQ_SPI_FGPO);
|
|
+}
|
|
+
|
|
+static void ltq_spi_chipselect(struct spi_device *spi, int cs)
|
|
+{
|
|
+ struct ltq_spi *hw = ltq_spi_to_hw(spi);
|
|
+ struct ltq_spi_controller_state *cstate = spi->controller_state;
|
|
+
|
|
+ switch (cs) {
|
|
+ case BITBANG_CS_ACTIVE:
|
|
+ ltq_spi_bits_per_word_set(spi);
|
|
+ ltq_spi_speed_set(spi);
|
|
+ ltq_spi_clockmode_set(spi);
|
|
+ ltq_spi_run_mode_set(hw);
|
|
+
|
|
+ cstate->cs_activate(spi);
|
|
+ break;
|
|
+
|
|
+ case BITBANG_CS_INACTIVE:
|
|
+ cstate->cs_deactivate(spi);
|
|
+
|
|
+ ltq_spi_config_mode_set(hw);
|
|
+
|
|
+ break;
|
|
+ }
|
|
+}
|
|
+
|
|
+static int ltq_spi_setup_transfer(struct spi_device *spi,
|
|
+ struct spi_transfer *t)
|
|
+{
|
|
+ struct ltq_spi *hw = ltq_spi_to_hw(spi);
|
|
+ u8 bits_per_word = spi->bits_per_word;
|
|
+
|
|
+ hw->curr_transfer = t;
|
|
+
|
|
+ if (t && t->bits_per_word)
|
|
+ bits_per_word = t->bits_per_word;
|
|
+
|
|
+ if (bits_per_word > 32)
|
|
+ return -EINVAL;
|
|
+
|
|
+ ltq_spi_config_mode_set(hw);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static const struct ltq_spi_cs_gpio_map ltq_spi_cs[] = {
|
|
+ { 15, 1, 0 },
|
|
+ { 22, 1, 0 },
|
|
+ { 13, 0, 1 },
|
|
+ { 10, 0, 1 },
|
|
+ { 9, 0, 1 },
|
|
+ { 11, 1, 1 },
|
|
+};
|
|
+
|
|
+static int ltq_spi_setup(struct spi_device *spi)
|
|
+{
|
|
+ struct ltq_spi *hw = ltq_spi_to_hw(spi);
|
|
+ struct ltq_spi_controller_data *cdata = spi->controller_data;
|
|
+ struct ltq_spi_controller_state *cstate;
|
|
+ u32 gpocon, fgpo;
|
|
+ int ret;
|
|
+
|
|
+ /* Set default word length to 8 if not set */
|
|
+ if (!spi->bits_per_word)
|
|
+ spi->bits_per_word = 8;
|
|
+
|
|
+ if (spi->bits_per_word > 32)
|
|
+ return -EINVAL;
|
|
+
|
|
+ if (!spi->controller_state) {
|
|
+ cstate = kzalloc(sizeof(struct ltq_spi_controller_state),
|
|
+ GFP_KERNEL);
|
|
+ if (!cstate)
|
|
+ return -ENOMEM;
|
|
+
|
|
+ spi->controller_state = cstate;
|
|
+ } else
|
|
+ return 0;
|
|
+
|
|
+ /*
|
|
+ * Up to six GPIOs can be connected to the SPI module
|
|
+ * via GPIO alternate function to control the chip select lines.
|
|
+ * For more flexibility in board layout this driver can also control
|
|
+ * the CS lines via GPIO API. If GPIOs should be used, board setup code
|
|
+ * have to register the SPI device with struct ltq_spi_controller_data
|
|
+ * attached.
|
|
+ */
|
|
+ if (cdata && cdata->gpio) {
|
|
+ ret = gpio_request(cdata->gpio, "spi-cs");
|
|
+ if (ret)
|
|
+ return -EBUSY;
|
|
+
|
|
+ ret = spi->mode & SPI_CS_HIGH ? 0 : 1;
|
|
+ gpio_direction_output(cdata->gpio, ret);
|
|
+
|
|
+ cstate->cs_activate = ltq_spi_gpio_cs_activate;
|
|
+ cstate->cs_deactivate = ltq_spi_gpio_cs_deactivate;
|
|
+ } else {
|
|
+ ret = ltq_gpio_request(ltq_spi_cs[spi->chip_select].gpio,
|
|
+ ltq_spi_cs[spi->chip_select].altsel0,
|
|
+ ltq_spi_cs[spi->chip_select].altsel1,
|
|
+ 1, "spi-cs");
|
|
+ if (ret)
|
|
+ return -EBUSY;
|
|
+
|
|
+ gpocon = (1 << (spi->chip_select +
|
|
+ LTQ_SPI_GPOCON_ISCSBN_SHIFT));
|
|
+
|
|
+ if (spi->mode & SPI_CS_HIGH)
|
|
+ gpocon |= (1 << spi->chip_select);
|
|
+
|
|
+ fgpo = (1 << (spi->chip_select + LTQ_SPI_FGPO_SETOUTN_SHIFT));
|
|
+
|
|
+ ltq_spi_reg_setbit(hw, gpocon, LTQ_SPI_GPOCON);
|
|
+ ltq_spi_reg_setbit(hw, fgpo, LTQ_SPI_FGPO);
|
|
+
|
|
+ cstate->cs_activate = ltq_spi_internal_cs_activate;
|
|
+ cstate->cs_deactivate = ltq_spi_internal_cs_deactivate;
|
|
+ }
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static void ltq_spi_cleanup(struct spi_device *spi)
|
|
+{
|
|
+ struct ltq_spi_controller_data *cdata = spi->controller_data;
|
|
+ struct ltq_spi_controller_state *cstate = spi->controller_state;
|
|
+ unsigned gpio;
|
|
+
|
|
+ if (cdata && cdata->gpio)
|
|
+ gpio = cdata->gpio;
|
|
+ else
|
|
+ gpio = ltq_spi_cs[spi->chip_select].gpio;
|
|
+
|
|
+ gpio_free(gpio);
|
|
+ kfree(cstate);
|
|
+}
|
|
+
|
|
+static void ltq_spi_txfifo_write(struct ltq_spi *hw)
|
|
+{
|
|
+ u32 fstat, data;
|
|
+ u16 fifo_space;
|
|
+
|
|
+ /* Determine how much FIFOs are free for TX data */
|
|
+ fstat = ltq_spi_reg_read(hw, LTQ_SPI_FSTAT);
|
|
+ fifo_space = hw->txfs - ((fstat >> LTQ_SPI_FSTAT_TXFFL_SHIFT) &
|
|
+ LTQ_SPI_FSTAT_TXFFL_MASK);
|
|
+
|
|
+ if (!fifo_space)
|
|
+ return;
|
|
+
|
|
+ while (hw->tx_cnt < hw->len && fifo_space) {
|
|
+ data = hw->get_tx(hw);
|
|
+ ltq_spi_reg_write(hw, data, LTQ_SPI_TB);
|
|
+ fifo_space--;
|
|
+ }
|
|
+}
|
|
+
|
|
+static void ltq_spi_rxfifo_read(struct ltq_spi *hw)
|
|
+{
|
|
+ u32 fstat, data, *rx32;
|
|
+ u16 fifo_fill;
|
|
+ u8 rxbv, shift, *rx8;
|
|
+
|
|
+ /* Determine how much FIFOs are filled with RX data */
|
|
+ fstat = ltq_spi_reg_read(hw, LTQ_SPI_FSTAT);
|
|
+ fifo_fill = ((fstat >> LTQ_SPI_FSTAT_RXFFL_SHIFT)
|
|
+ & LTQ_SPI_FSTAT_RXFFL_MASK);
|
|
+
|
|
+ if (!fifo_fill)
|
|
+ return;
|
|
+
|
|
+ /*
|
|
+ * The 32 bit FIFO is always used completely independent from the
|
|
+ * bits_per_word value. Thus four bytes have to be read at once
|
|
+ * per FIFO.
|
|
+ */
|
|
+ rx32 = (u32 *) hw->rx;
|
|
+ while (hw->len - hw->rx_cnt >= 4 && fifo_fill) {
|
|
+ *rx32++ = ltq_spi_reg_read(hw, LTQ_SPI_RB);
|
|
+ hw->rx_cnt += 4;
|
|
+ hw->rx += 4;
|
|
+ fifo_fill--;
|
|
+ }
|
|
+
|
|
+ /*
|
|
+ * If there are remaining bytes, read byte count from STAT.RXBV
|
|
+ * register and read the data byte-wise.
|
|
+ */
|
|
+ while (fifo_fill && hw->rx_cnt < hw->len) {
|
|
+ rxbv = (ltq_spi_reg_read(hw, LTQ_SPI_STAT) >>
|
|
+ LTQ_SPI_STAT_RXBV_SHIFT) & LTQ_SPI_STAT_RXBV_MASK;
|
|
+ data = ltq_spi_reg_read(hw, LTQ_SPI_RB);
|
|
+
|
|
+ shift = (rxbv - 1) * 8;
|
|
+ rx8 = hw->rx;
|
|
+
|
|
+ while (rxbv) {
|
|
+ *rx8++ = (data >> shift) & 0xFF;
|
|
+ rxbv--;
|
|
+ shift -= 8;
|
|
+ hw->rx_cnt++;
|
|
+ hw->rx++;
|
|
+ }
|
|
+
|
|
+ fifo_fill--;
|
|
+ }
|
|
+}
|
|
+
|
|
+static void ltq_spi_rxreq_set(struct ltq_spi *hw)
|
|
+{
|
|
+ u32 rxreq, rxreq_max, rxtodo;
|
|
+
|
|
+ rxtodo = ltq_spi_reg_read(hw, LTQ_SPI_RXCNT) & LTQ_SPI_RXCNT_TODO_MASK;
|
|
+
|
|
+ /*
|
|
+ * In RX-only mode the serial clock is activated only after writing
|
|
+ * the expected amount of RX bytes into RXREQ register.
|
|
+ * To avoid receive overflows at high clocks it is better to request
|
|
+ * only the amount of bytes that fits into all FIFOs. This value
|
|
+ * depends on the FIFO size implemented in hardware.
|
|
+ */
|
|
+ rxreq = hw->len - hw->rx_cnt;
|
|
+ rxreq_max = hw->rxfs << 2;
|
|
+ rxreq = min(rxreq_max, rxreq);
|
|
+
|
|
+ if (!rxtodo && rxreq)
|
|
+ ltq_spi_reg_write(hw, rxreq, LTQ_SPI_RXREQ);
|
|
+}
|
|
+
|
|
+static inline void ltq_spi_complete(struct ltq_spi *hw)
|
|
+{
|
|
+ complete(&hw->done);
|
|
+}
|
|
+
|
|
+irqreturn_t ltq_spi_tx_irq(int irq, void *data)
|
|
+{
|
|
+ struct ltq_spi *hw = data;
|
|
+ unsigned long flags;
|
|
+ int completed = 0;
|
|
+
|
|
+ spin_lock_irqsave(&hw->lock, flags);
|
|
+
|
|
+ if (hw->tx_cnt < hw->len)
|
|
+ ltq_spi_txfifo_write(hw);
|
|
+
|
|
+ if (hw->tx_cnt == hw->len)
|
|
+ completed = 1;
|
|
+
|
|
+ spin_unlock_irqrestore(&hw->lock, flags);
|
|
+
|
|
+ if (completed)
|
|
+ ltq_spi_complete(hw);
|
|
+
|
|
+ return IRQ_HANDLED;
|
|
+}
|
|
+
|
|
+irqreturn_t ltq_spi_rx_irq(int irq, void *data)
|
|
+{
|
|
+ struct ltq_spi *hw = data;
|
|
+ unsigned long flags;
|
|
+ int completed = 0;
|
|
+
|
|
+ spin_lock_irqsave(&hw->lock, flags);
|
|
+
|
|
+ if (hw->rx_cnt < hw->len) {
|
|
+ ltq_spi_rxfifo_read(hw);
|
|
+
|
|
+ if (hw->tx && hw->tx_cnt < hw->len)
|
|
+ ltq_spi_txfifo_write(hw);
|
|
+ }
|
|
+
|
|
+ if (hw->rx_cnt == hw->len)
|
|
+ completed = 1;
|
|
+ else if (!hw->tx)
|
|
+ ltq_spi_rxreq_set(hw);
|
|
+
|
|
+ spin_unlock_irqrestore(&hw->lock, flags);
|
|
+
|
|
+ if (completed)
|
|
+ ltq_spi_complete(hw);
|
|
+
|
|
+ return IRQ_HANDLED;
|
|
+}
|
|
+
|
|
+irqreturn_t ltq_spi_err_irq(int irq, void *data)
|
|
+{
|
|
+ struct ltq_spi *hw = data;
|
|
+ unsigned long flags;
|
|
+
|
|
+ spin_lock_irqsave(&hw->lock, flags);
|
|
+
|
|
+ /* Disable all interrupts */
|
|
+ ltq_spi_reg_clearbit(hw, LTQ_SPI_IRNEN_ALL, LTQ_SPI_IRNEN);
|
|
+
|
|
+ /* Clear all error flags */
|
|
+ ltq_spi_reg_write(hw, LTQ_SPI_WHBSTATE_CLR_ERRORS, LTQ_SPI_WHBSTATE);
|
|
+
|
|
+ /* Flush FIFOs */
|
|
+ ltq_spi_reg_setbit(hw, LTQ_SPI_RXFCON_RXFLU, LTQ_SPI_RXFCON);
|
|
+ ltq_spi_reg_setbit(hw, LTQ_SPI_TXFCON_TXFLU, LTQ_SPI_TXFCON);
|
|
+
|
|
+ hw->status = -EIO;
|
|
+ spin_unlock_irqrestore(&hw->lock, flags);
|
|
+
|
|
+ ltq_spi_complete(hw);
|
|
+
|
|
+ return IRQ_HANDLED;
|
|
+}
|
|
+
|
|
+static int ltq_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
|
|
+{
|
|
+ struct ltq_spi *hw = ltq_spi_to_hw(spi);
|
|
+ u32 irq_flags = 0;
|
|
+
|
|
+ hw->tx = t->tx_buf;
|
|
+ hw->rx = t->rx_buf;
|
|
+ hw->len = t->len;
|
|
+ hw->tx_cnt = 0;
|
|
+ hw->rx_cnt = 0;
|
|
+ hw->status = 0;
|
|
+ INIT_COMPLETION(hw->done);
|
|
+
|
|
+ ltq_spi_xmit_set(hw, t);
|
|
+
|
|
+ /* Enable error interrupts */
|
|
+ ltq_spi_reg_setbit(hw, LTQ_SPI_IRNEN_E, LTQ_SPI_IRNEN);
|
|
+
|
|
+ if (hw->tx) {
|
|
+ /* Initially fill TX FIFO with as much data as possible */
|
|
+ ltq_spi_txfifo_write(hw);
|
|
+ irq_flags |= LTQ_SPI_IRNEN_T;
|
|
+
|
|
+ /* Always enable RX interrupt in Full Duplex mode */
|
|
+ if (hw->rx)
|
|
+ irq_flags |= LTQ_SPI_IRNEN_R;
|
|
+ } else if (hw->rx) {
|
|
+ /* Start RX clock */
|
|
+ ltq_spi_rxreq_set(hw);
|
|
+
|
|
+ /* Enable RX interrupt to receive data from RX FIFOs */
|
|
+ irq_flags |= LTQ_SPI_IRNEN_R;
|
|
+ }
|
|
+
|
|
+ /* Enable TX or RX interrupts */
|
|
+ ltq_spi_reg_setbit(hw, irq_flags, LTQ_SPI_IRNEN);
|
|
+ wait_for_completion_interruptible(&hw->done);
|
|
+
|
|
+ /* Disable all interrupts */
|
|
+ ltq_spi_reg_clearbit(hw, LTQ_SPI_IRNEN_ALL, LTQ_SPI_IRNEN);
|
|
+
|
|
+ /*
|
|
+ * Return length of current transfer for bitbang utility code if
|
|
+ * no errors occured during transmission.
|
|
+ */
|
|
+ if (!hw->status)
|
|
+ hw->status = hw->len;
|
|
+
|
|
+ return hw->status;
|
|
+}
|
|
+
|
|
+static const struct ltq_spi_irq_map ltq_spi_irqs[] = {
|
|
+ { "spi_tx", ltq_spi_tx_irq },
|
|
+ { "spi_rx", ltq_spi_rx_irq },
|
|
+ { "spi_err", ltq_spi_err_irq },
|
|
+};
|
|
+
|
|
+static int __init ltq_spi_probe(struct platform_device *pdev)
|
|
+{
|
|
+ struct spi_master *master;
|
|
+ struct resource *r;
|
|
+ struct ltq_spi *hw;
|
|
+ struct ltq_spi_platform_data *pdata = pdev->dev.platform_data;
|
|
+ int ret, i;
|
|
+ u32 data, id;
|
|
+
|
|
+ master = spi_alloc_master(&pdev->dev, sizeof(struct ltq_spi));
|
|
+ if (!master) {
|
|
+ dev_err(&pdev->dev, "spi_alloc_master\n");
|
|
+ ret = -ENOMEM;
|
|
+ goto err;
|
|
+ }
|
|
+
|
|
+ hw = spi_master_get_devdata(master);
|
|
+
|
|
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
+ if (r == NULL) {
|
|
+ dev_err(&pdev->dev, "platform_get_resource\n");
|
|
+ ret = -ENOENT;
|
|
+ goto err_master;
|
|
+ }
|
|
+
|
|
+ r = devm_request_mem_region(&pdev->dev, r->start, resource_size(r),
|
|
+ pdev->name);
|
|
+ if (!r) {
|
|
+ dev_err(&pdev->dev, "devm_request_mem_region\n");
|
|
+ ret = -ENXIO;
|
|
+ goto err_master;
|
|
+ }
|
|
+
|
|
+ hw->base = devm_ioremap_nocache(&pdev->dev, r->start, resource_size(r));
|
|
+ if (!hw->base) {
|
|
+ dev_err(&pdev->dev, "devm_ioremap_nocache\n");
|
|
+ ret = -ENXIO;
|
|
+ goto err_master;
|
|
+ }
|
|
+
|
|
+ hw->clk = clk_get(&pdev->dev, "fpi");
|
|
+ if (IS_ERR(hw->clk)) {
|
|
+ dev_err(&pdev->dev, "clk_get\n");
|
|
+ ret = PTR_ERR(hw->clk);
|
|
+ goto err_master;
|
|
+ }
|
|
+
|
|
+ memset(hw->irq, 0, sizeof(hw->irq));
|
|
+ for (i = 0; i < ARRAY_SIZE(ltq_spi_irqs); i++) {
|
|
+ ret = platform_get_irq_byname(pdev, ltq_spi_irqs[i].name);
|
|
+ if (0 > ret) {
|
|
+ dev_err(&pdev->dev, "platform_get_irq_byname\n");
|
|
+ goto err_irq;
|
|
+ }
|
|
+
|
|
+ hw->irq[i] = ret;
|
|
+ ret = request_irq(hw->irq[i], ltq_spi_irqs[i].handler,
|
|
+ 0, ltq_spi_irqs[i].name, hw);
|
|
+ if (ret) {
|
|
+ dev_err(&pdev->dev, "request_irq\n");
|
|
+ goto err_irq;
|
|
+ }
|
|
+ }
|
|
+
|
|
+ hw->bitbang.master = spi_master_get(master);
|
|
+ hw->bitbang.chipselect = ltq_spi_chipselect;
|
|
+ hw->bitbang.setup_transfer = ltq_spi_setup_transfer;
|
|
+ hw->bitbang.txrx_bufs = ltq_spi_txrx_bufs;
|
|
+
|
|
+ master->bus_num = pdev->id;
|
|
+ master->num_chipselect = pdata->num_chipselect;
|
|
+ master->setup = ltq_spi_setup;
|
|
+ master->cleanup = ltq_spi_cleanup;
|
|
+
|
|
+ hw->dev = &pdev->dev;
|
|
+ init_completion(&hw->done);
|
|
+ spin_lock_init(&hw->lock);
|
|
+
|
|
+ /* Set GPIO alternate functions to SPI */
|
|
+ ltq_gpio_request(LTQ_SPI_GPIO_DI, 1, 0, 0, "spi-di");
|
|
+ ltq_gpio_request(LTQ_SPI_GPIO_DO, 1, 0, 1, "spi-do");
|
|
+ ltq_gpio_request(LTQ_SPI_GPIO_CLK, 1, 0, 1, "spi-clk");
|
|
+
|
|
+ ltq_spi_hw_enable(hw);
|
|
+
|
|
+ /* Read module capabilities */
|
|
+ id = ltq_spi_reg_read(hw, LTQ_SPI_ID);
|
|
+ hw->txfs = (id >> LTQ_SPI_ID_TXFS_SHIFT) & LTQ_SPI_ID_TXFS_MASK;
|
|
+ hw->rxfs = (id >> LTQ_SPI_ID_TXFS_SHIFT) & LTQ_SPI_ID_TXFS_MASK;
|
|
+ hw->dma_support = (id & LTQ_SPI_ID_CFG) ? 1 : 0;
|
|
+
|
|
+ ltq_spi_config_mode_set(hw);
|
|
+
|
|
+ /* Enable error checking, disable TX/RX, set idle value high */
|
|
+ data = LTQ_SPI_CON_RUEN | LTQ_SPI_CON_AEN |
|
|
+ LTQ_SPI_CON_TEN | LTQ_SPI_CON_REN |
|
|
+ LTQ_SPI_CON_TXOFF | LTQ_SPI_CON_RXOFF | LTQ_SPI_CON_IDLE;
|
|
+ ltq_spi_reg_write(hw, data, LTQ_SPI_CON);
|
|
+
|
|
+ /* Enable master mode and clear error flags */
|
|
+ ltq_spi_reg_write(hw, LTQ_SPI_WHBSTATE_SETMS |
|
|
+ LTQ_SPI_WHBSTATE_CLR_ERRORS, LTQ_SPI_WHBSTATE);
|
|
+
|
|
+ /* Reset GPIO/CS registers */
|
|
+ ltq_spi_reg_write(hw, 0x0, LTQ_SPI_GPOCON);
|
|
+ ltq_spi_reg_write(hw, 0xFF00, LTQ_SPI_FGPO);
|
|
+
|
|
+ /* Enable and flush FIFOs */
|
|
+ ltq_spi_reset_fifos(hw);
|
|
+
|
|
+ ret = spi_bitbang_start(&hw->bitbang);
|
|
+ if (ret) {
|
|
+ dev_err(&pdev->dev, "spi_bitbang_start\n");
|
|
+ goto err_bitbang;
|
|
+ }
|
|
+
|
|
+ platform_set_drvdata(pdev, hw);
|
|
+
|
|
+ pr_info("Lantiq SoC SPI controller rev %u (TXFS %u, RXFS %u, DMA %u)\n",
|
|
+ id & LTQ_SPI_ID_REV_MASK, hw->txfs, hw->rxfs, hw->dma_support);
|
|
+
|
|
+ return 0;
|
|
+
|
|
+err_bitbang:
|
|
+ ltq_spi_hw_disable(hw);
|
|
+
|
|
+err_irq:
|
|
+ clk_put(hw->clk);
|
|
+
|
|
+ for (; i > 0; i--)
|
|
+ free_irq(hw->irq[i], hw);
|
|
+
|
|
+err_master:
|
|
+ spi_master_put(master);
|
|
+
|
|
+err:
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+static int __exit ltq_spi_remove(struct platform_device *pdev)
|
|
+{
|
|
+ struct ltq_spi *hw = platform_get_drvdata(pdev);
|
|
+ int ret, i;
|
|
+
|
|
+ ret = spi_bitbang_stop(&hw->bitbang);
|
|
+ if (ret)
|
|
+ return ret;
|
|
+
|
|
+ platform_set_drvdata(pdev, NULL);
|
|
+
|
|
+ ltq_spi_config_mode_set(hw);
|
|
+ ltq_spi_hw_disable(hw);
|
|
+
|
|
+ for (i = 0; i < ARRAY_SIZE(hw->irq); i++)
|
|
+ if (0 < hw->irq[i])
|
|
+ free_irq(hw->irq[i], hw);
|
|
+
|
|
+ gpio_free(LTQ_SPI_GPIO_DI);
|
|
+ gpio_free(LTQ_SPI_GPIO_DO);
|
|
+ gpio_free(LTQ_SPI_GPIO_CLK);
|
|
+
|
|
+ clk_put(hw->clk);
|
|
+ spi_master_put(hw->bitbang.master);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static struct platform_driver ltq_spi_driver = {
|
|
+ .driver = {
|
|
+ .name = "ltq-spi",
|
|
+ .owner = THIS_MODULE,
|
|
+ },
|
|
+ .remove = __exit_p(ltq_spi_remove),
|
|
+};
|
|
+
|
|
+static int __init ltq_spi_init(void)
|
|
+{
|
|
+ return platform_driver_probe(<q_spi_driver, ltq_spi_probe);
|
|
+}
|
|
+module_init(ltq_spi_init);
|
|
+
|
|
+static void __exit ltq_spi_exit(void)
|
|
+{
|
|
+ platform_driver_unregister(<q_spi_driver);
|
|
+}
|
|
+module_exit(ltq_spi_exit);
|
|
+
|
|
+MODULE_DESCRIPTION("Lantiq SoC SPI controller driver");
|
|
+MODULE_AUTHOR("Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>");
|
|
+MODULE_LICENSE("GPL");
|
|
+MODULE_ALIAS("platform:ltq-spi");
|