mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-11-24 21:52:49 +02:00
cc5064c30c
git-svn-id: svn://svn.openwrt.org/openwrt/trunk/openwrt@257 3c298f89-4303-0410-b956-a3cf2f4a3e73
118 lines
4.9 KiB
Plaintext
118 lines
4.9 KiB
Plaintext
CPU revision is: 00029007
|
|
Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes.
|
|
Primary data cache 4kB, 2-way, linesize 16 bytes.
|
|
Linux version 2.4.29 (wbx@auriga) (gcc version 3.3.5) #1 Thu Feb 17 23:51:07 CET 2005
|
|
Determined physical RAM map:
|
|
memory: 01000000 @ 00000000 (usable)
|
|
On node 0 totalpages: 4096
|
|
zone(0): 4096 pages.
|
|
zone(1): 0 pages.
|
|
zone(2): 0 pages.
|
|
Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs init=/etc/preinit noinitrd console=ttyS0,115200
|
|
CPU: BCM4712 rev 1 at 200 MHz
|
|
Using 100.000 MHz high precision timer.
|
|
Calibrating delay loop... 199.06 BogoMIPS
|
|
Memory: 14044k/16384k available (1474k kernel code, 2340k reserved, 100k data, 100k init, 0k highmem)
|
|
Dentry cache hash table entries: 2048 (order: 2, 16384 bytes)
|
|
Inode cache hash table entries: 1024 (order: 1, 8192 bytes)
|
|
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
|
|
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
|
|
Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
|
|
Checking for 'wait' instruction... unavailable.
|
|
POSIX conformance testing by UNIFIX
|
|
PCI: Disabled
|
|
PCI: Fixing up bus 0
|
|
Linux NET4.0 for Linux 2.4
|
|
Based upon Swansea University Computer Society NET3.039
|
|
Initializing RT netlink socket
|
|
Starting kswapd
|
|
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
|
|
devfs: boot_options: 0x1
|
|
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
|
|
Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher
|
|
pty: 256 Unix98 ptys configured
|
|
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
|
|
ttyS00 at 0xb8000300 (irq = 3) is a 16550A
|
|
ttyS01 at 0xb8000400 (irq = 0) is a 16550A
|
|
Software Watchdog Timer: 0.05, timer margin: 60 sec
|
|
loop: loaded (max 8 devices)
|
|
PPP generic driver version 2.4.2
|
|
Physically mapped flash: Found an alias at 0x400000 for the chip at 0x0
|
|
Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0
|
|
Physically mapped flash: Found an alias at 0xc00000 for the chip at 0x0
|
|
Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0
|
|
Physically mapped flash: Found an alias at 0x1400000 for the chip at 0x0
|
|
Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0
|
|
Physically mapped flash: Found an alias at 0x1c00000 for the chip at 0x0
|
|
cfi_cmdset_0001: Erase suspend on write enabled
|
|
0: offset=0x0,size=0x2000,blocks=8
|
|
1: offset=0x10000,size=0x10000,blocks=63
|
|
Using word write method
|
|
Flash device: 0x400000 at 0x1c000000
|
|
Physically mapped flash: squashfs filesystem found at block 946
|
|
Creating 5 MTD partitions on "Physically mapped flash":
|
|
0x00000000-0x00040000 : "pmon"
|
|
0x00040000-0x003f0000 : "linux"
|
|
0x000ec990-0x001ceb48 : "rootfs"
|
|
mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only
|
|
0x003f0000-0x00400000 : "nvram"
|
|
0x001d0000-0x003f0000 : "OpenWrt"
|
|
sflash: found no supported devices
|
|
NET4: Linux TCP/IP 1.0 for NET4.0
|
|
IP Protocols: ICMP, UDP, TCP, IGMP
|
|
IP: routing cache hash table of 512 buckets, 4Kbytes
|
|
TCP: Hash tables configured (established 1024 bind 2048)
|
|
ip_conntrack version 2.1 (128 buckets, 1024 max) - 288 bytes per conntrack
|
|
ip_tables: (C) 2000-2002 Netfilter core team
|
|
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
|
|
NET4: Ethernet Bridge 008 for NET4.0
|
|
Bridge firewalling registered
|
|
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
|
|
All bugs added by David S. Miller <davem@redhat.com>
|
|
VFS: Mounted root (squashfs filesystem) readonly.
|
|
Mounted devfs on /dev
|
|
Freeing unused kernel memory: 100k freed
|
|
Algorithmics/MIPS FPU Emulator v1.5
|
|
diag boardtype: 00000708
|
|
using v1 hardware
|
|
led -> 00
|
|
led -> 01
|
|
jffs2.bbc: SIZE compression mode activated.
|
|
PCI: Setting latency timer of device 00:02.0 to 64
|
|
5325E phy=0
|
|
5325E VLAN programming for BCM5325E-MDIO I/F switch
|
|
1:(0x00) value=0x0000
|
|
2:(0x00) value=0x0000
|
|
1:(0x13) value=0x001e
|
|
2:(0x13) value=0x001e
|
|
1:(0x00) value=0x0000
|
|
2:(0x00) value=0x0000
|
|
1:(0x13) value=0x001e
|
|
2:(0x13) value=0x001e
|
|
1:(0x00) value=0x0000
|
|
2:(0x00) value=0x0000
|
|
1:(0x13) value=0x001e
|
|
2:(0x13) value=0x001e
|
|
1:(0x00) value=0x0000
|
|
2:(0x00) value=0x0000
|
|
1:(0x13) value=0x001e
|
|
2:(0x13) value=0x001e
|
|
1:(0x00) value=0x0000
|
|
2:(0x00) value=0x0000
|
|
eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.13.0
|
|
PCI: Setting latency timer of device 00:01.0 to 64
|
|
eth1: Broadcom BCM4320 802.11 Wireless Controller 3.60.13.0
|
|
device eth0 entered promiscuous mode
|
|
vlan0: add 01:00:5e:00:00:01 mcast address to master interface
|
|
device eth1 entered promiscuous mode
|
|
br0: port 2(eth1) entering learning state
|
|
br0: port 1(vlan0) entering learning state
|
|
br0: port 2(eth1) entering forwarding state
|
|
br0: topology change detected, propagating
|
|
br0: port 1(vlan0) entering forwarding state
|
|
br0: topology change detected, propagating
|
|
vlan1: Setting MAC address to 00 12 17 cc cd 25.
|
|
vlan1: add 01:00:5e:00:00:01 mcast address to master interface
|
|
led -> 00
|
|
|