1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-24 19:56:15 +02:00
openwrt-xburst/target/image/rb532/Makefile
nbd 99f2f68b6f Add NAND flash/YAFFS2 patches for RB532 by David Goodenough
Read the kernel command line from an otherwise unused area of the kernel image (will be used for changing the command line on the fly when copying the system from CF to NAND)


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@5296 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-10-26 01:08:41 +00:00

77 lines
2.3 KiB
Makefile

#
# Copyright (C) 2006 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
include $(INCLUDE_DIR)/kernel.mk
LOADADDR = 0x81000000 # RAM start + 16M
KERNEL_ENTRY = 0x80101000
RAMSIZE = 0x00100000 # 1MB
IMAGE_COPY = 1
LOADER_MAKEOPTS= \
KDIR=$(KDIR) \
LOADADDR=$(LOADADDR) \
KERNEL_ENTRY=$(KERNEL_ENTRY) \
RAMSIZE=$(RAMSIZE) \
IMAGE_COPY=$(IMAGE_COPY)
define Build/Clean
$(MAKE) -C ../generic/lzma-loader $(LOADER_MAKEOPTS) clean
endef
CMDLINE_SIZE=512
CMDLINE_OFFSET=4112
define Image/Prepare
echo 'root=/dev/cfa2 ' | \
dd bs=$(CMDLINE_SIZE) count=1 conv=sync | \
dd of=$(LINUX_DIR)/vmlinux bs=$(CMDLINE_OFFSET) conv=notrunc seek=1
$(KERNEL_CROSS)objcopy -O binary -R .reginfo -R .note -R .comment -R .mdebug -S $(LINUX_DIR)/vmlinux $(LINUX_KERNEL)
endef
define Image/BuildKernel
cat $(KDIR)/vmlinux | $(STAGING_DIR)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux.lzma
$(MAKE) -C ../generic/lzma-loader $(LOADER_MAKEOPTS) clean compile
$(CP) $(KDIR)/loader.elf $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-vmlinux
endef
PARTITION1=\x80\x01\x01\x00\x27\x01\x20\x7b\x20\x00\x00\x00\xe0\x1e\x00\x00# 4 MB (kernel part)
PARTITION2=\x00\x00\x01\x7c\x83\x01\xa0\x64\x00\x1f\x00\x00\x40\x7a\x00\x00# 16 MB (rootfs part)
define Image/cmdline/jffs2-64k
block2mtd.block2mtd=/dev/cfa2,65536 root=/dev/mtdblock0 rootfstype=jffs2
endef
define Image/cmdline/jffs2-128k
block2mtd.block2mtd=/dev/cfa2,131072 root=/dev/mtdblock0 rootfstype=jffs2
endef
define Image/cmdline/ext2
root=/dev/cfa2 rootfstype=ext2
endef
define Image/Build
echo '$(strip $(call Image/cmdline/$(1))) ' | \
dd bs=$(CMDLINE_SIZE) count=1 conv=sync | \
dd of=$(LINUX_DIR)/vmlinux bs=$(CMDLINE_OFFSET) conv=notrunc seek=1
( \
echo -ne OWRT | dd bs=$$$$((0x1be)) conv=sync; \
( \
echo -ne '$(strip $(PARTITION1))'; \
echo -ne '$(strip $(PARTITION2))'; \
) | dd bs=$$$$((0x40)) conv=sync; \
echo -ne '\x55\xaa'; \
dd if=/dev/zero bs=$$$$((0x3e00)) conv=sync count=1; \
dd if=$(LINUX_DIR)/vmlinux bs=$$$$((0x3dc000)) conv=sync; \
cat $(KDIR)/root.$(1); \
echo -ne '\xde\xad\xc0\xde'; \
) > $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).bin
endef
$(eval $(call BuildImage))