mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-11-25 09:18:27 +02:00
e7b7cd0133
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13674 3c298f89-4303-0410-b956-a3cf2f4a3e73
67 lines
2.5 KiB
Bash
Executable File
67 lines
2.5 KiB
Bash
Executable File
#!/bin/bash
|
|
#
|
|
# tftp flash script for wireless routers
|
|
#
|
|
# Copyright (C) 2004 by Oleg I. Vdovikin <oleg@cs.msu.su>
|
|
# Copyright (C) 2005 by Waldemar Brodkorb <wbx@openwrt.org>
|
|
#
|
|
# This program is free software; you can redistribute it and/or modify
|
|
# it under the terms of the GNU General Public License as published by
|
|
# the Free Software Foundation; either version 2 of the License, or
|
|
# (at your option) any later version.
|
|
#
|
|
# This program is distributed in the hope that it will be useful,
|
|
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
# General Public License for more details.
|
|
#
|
|
# You should have received a copy of the GNU General Public License
|
|
# along with this program; if not, write to the Free Software
|
|
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
#
|
|
|
|
if [ -z "$1" ] || [ ! -f $1 ] || [ -z $2 ]; then
|
|
echo Usage: $0 firmware vendor
|
|
cat << EOF
|
|
IMPORTANT:
|
|
Notes for Linksys / Asus WL500gx router:
|
|
be sure you have set boot_wait to yes. Power on your router
|
|
after executing this script.
|
|
|
|
Notes for Asus WL500g router:
|
|
be sure POWER led is flashing (If this is not the case
|
|
poweroff the device, push the reset button & power on
|
|
it again, then release button)
|
|
|
|
1) connect your pc to the LAN port
|
|
2) be sure your link is up and has an address in the
|
|
192.168.1.0/24 address range (and not the 192.168.1.1)
|
|
|
|
Notes for Toshiba router:
|
|
boot_wait is enabled by default on these units.
|
|
|
|
1) connect your pc to any of the four LAN ports
|
|
2) be sure your link is up and has an address in the
|
|
192.168.10.1/24 address range (and not the 192.168.10.1)
|
|
3) run this script (unit will only accept .trx images)
|
|
4) Turn unit power on.
|
|
|
|
EOF
|
|
exit 0
|
|
fi
|
|
if [ "$2" == "asus" ]; then
|
|
echo Confirming IP address setting...
|
|
echo -en "get ASUSSPACELINK\x01\x01\xa8\xc0 /dev/null\nquit\n" | tftp 192.168.1.1
|
|
echo Flashing 192.168.1.1 using $1...
|
|
echo -en "binary\nput $1 ASUSSPACELINK\nquit\n" | tftp 192.168.1.1
|
|
echo Please wait until leds stops flashing.
|
|
elif [ "$2" == "linksys" ]; then
|
|
echo Flashing 192.168.1.1 using $1...
|
|
echo -en "rexmt 1\ntrace\nbinary\nput $1\nquit\n" | tftp 192.168.1.1
|
|
echo Please wait until power led stops flashing. Do not poweroff! Then you can login via telnet 192.168.1.1.
|
|
elif [ "$2" == "toshiba" ]; then
|
|
echo Flashing 192.168.10.1 using $1...
|
|
echo -en "rexmt 1\ntrace\nbinary\nput $1\nquit\n" | tftp 192.168.10.1
|
|
echo Unit will automatically reboot within 5 minutes. Do not power off. Then you can login via telnet 192.168.10.1.
|
|
fi
|