juhosg 29b4b3c009 ip17xx: Initialize VLAN state upon reset ... Let VLAN state variables be initialized not only when the enable VLAN bit is toggled, but also upon reset. At this point, this should be a no-op, since the driver reads the current hardware state before doing any modifications anyway, but I plan to keep some state locally in the subsequent patches. Signed-off-by: Martin Mares <mj@ucw.cz> Signed-off-by: Patrick Horn <patrick.horn@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21716 3c298f89-4303-0410-b956-a3cf2f4a3e73		2010-06-08 20:18:30 +00:00
..
adm6996.c	fix link status detection in various switch drivers	2009-12-08 14:06:09 +00:00
adm6996.h	Add stub driver for ADM6996F switches (configured through MII)	2008-04-20 02:53:04 +00:00
ar8216.c	Generic: Clean up output of AR8216 driver.	2010-04-10 11:34:11 +00:00
ar8216.h	[PATCH 1/2] Add support for the ar8316 switch.	2010-04-05 23:03:16 +00:00
ip175c.c	ip17xx: Initialize VLAN state upon reset	2010-06-08 20:18:30 +00:00
mvswitch.c	fix link status detection in various switch drivers	2009-12-08 14:06:09 +00:00
mvswitch.h	add missing defines for mvswitch	2008-07-21 18:12:38 +00:00
rtl8306.c	rtl8306: manage the wan port as a separate phy device with proper link status reading and autonegotiation - the genphy driver does not handle it properly	2009-12-09 03:25:33 +00:00
rtl8366_smi.c	rtl8366_smi: sanitize gpio values to a 0/1 boolean	2010-01-30 15:25:12 +00:00
rtl8366_smi.h	rtl8366: make it available on all platforms	2010-01-25 15:13:38 +00:00
rtl8366rb.c	kernel: add driver for the RTL8366RB switch	2010-02-24 13:39:02 +00:00
rtl8366s.c	rtl8366s: reset the chip early, this allows ethernet to work as soon as possible	2010-01-27 21:01:48 +00:00
swconfig.c	swconfig: Fix a bug in use of SWITCH_PORT_FLAG_TAGGED	2010-06-08 20:17:03 +00:00