1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-07 13:51:34 +02:00
openwrt-xburst/target/linux/ar71xx/base-files/etc/uci-defaults
juhosg 2b1cf2b32c ar71xx: add support for TP-Link TL-MR3020
This patch adds support for the TP-Link device TL-MR3020 which is very
similiar to the TL-WR703N.
The TL-MR3020 uses 5 LEDs, 1 push button and a switch with 3 positions.
Only four LEDs can be controlled via GPIO. The power LED is connected to
the power supply.
The WPS push button has been mapped to KEY_WPS_BUTTON. The two GPIO signals
of the sliding switch have been mapped to BTN_0 and BTN_1.

I have also setup a wiki page with details here:
http://wiki.openwrt.org/toh/tp-link/tl-mr3020

USB is working and has been tested with USB mass storage and USB UMTS
stick.

Wifi also seems to work.

Ethernet is working too.

Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29651 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-04 17:30:47 +00:00
..
inittab-console-fixup [ar71xx] base-files: make sure inittab-console-fixup returns with success (#10275) 2011-10-24 21:35:43 +00:00
leds ar71xx: add support for the ALFA Network N2/N5 boards 2012-01-01 19:30:25 +00:00
network ar71xx: add support for TP-Link TL-MR3020 2012-01-04 17:30:47 +00:00
ubootenv ar71xx: generate ubootenv from uci-defaults instead of providing defconfig 2011-11-12 10:54:04 +00:00
vlan-migration [ar71xx] add uci-defaults script to migrate vlan 0 to vlan 1 after sysupgrade on devices using the RTL8366s switch 2010-08-13 19:29:51 +00:00
wrt160nl ar71xx: combine LEDs setup in one file 2011-11-01 11:20:49 +00:00