mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-12-30 23:02:25 +02:00
d2f6c11460
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31126 3c298f89-4303-0410-b956-a3cf2f4a3e73
506 lines
13 KiB
Diff
506 lines
13 KiB
Diff
--- a/drivers/bcma/Kconfig
|
|
+++ b/drivers/bcma/Kconfig
|
|
@@ -38,6 +38,11 @@ config BCMA_HOST_SOC
|
|
bool
|
|
depends on BCMA_DRIVER_MIPS
|
|
|
|
+config BCMA_SFLASH
|
|
+ bool
|
|
+ depends on BCMA_DRIVER_MIPS
|
|
+ default y
|
|
+
|
|
config BCMA_DRIVER_MIPS
|
|
bool "BCMA Broadcom MIPS core driver"
|
|
depends on BCMA && MIPS
|
|
--- a/drivers/bcma/Makefile
|
|
+++ b/drivers/bcma/Makefile
|
|
@@ -1,5 +1,6 @@
|
|
bcma-y += main.o scan.o core.o sprom.o
|
|
bcma-y += driver_chipcommon.o driver_chipcommon_pmu.o
|
|
+bcma-$(CONFIG_BCMA_SFLASH) += driver_chipcommon_sflash.o
|
|
bcma-y += driver_pci.o
|
|
bcma-$(CONFIG_BCMA_DRIVER_PCI_HOSTMODE) += driver_pci_host.o
|
|
bcma-$(CONFIG_BCMA_DRIVER_MIPS) += driver_mips.o
|
|
--- a/drivers/bcma/bcma_private.h
|
|
+++ b/drivers/bcma/bcma_private.h
|
|
@@ -41,6 +41,11 @@ void bcma_chipco_serial_init(struct bcma
|
|
u32 bcma_pmu_alp_clock(struct bcma_drv_cc *cc);
|
|
u32 bcma_pmu_get_clockcpu(struct bcma_drv_cc *cc);
|
|
|
|
+#ifdef CONFIG_BCMA_SFLASH
|
|
+/* driver_chipcommon_sflash.c */
|
|
+int bcma_sflash_init(struct bcma_drv_cc *cc);
|
|
+#endif /* CONFIG_BCMA_SFLASH */
|
|
+
|
|
#ifdef CONFIG_BCMA_HOST_PCI
|
|
/* host_pci.c */
|
|
extern int __init bcma_host_pci_init(void);
|
|
--- /dev/null
|
|
+++ b/drivers/bcma/driver_chipcommon_sflash.c
|
|
@@ -0,0 +1,398 @@
|
|
+/*
|
|
+ * Broadcom SiliconBackplane chipcommon serial flash interface
|
|
+ *
|
|
+ * Copyright 2011, Jonas Gorski <jonas.gorski@gmail.com>
|
|
+ * Copyright 2011, 2012, Hauke Mehrtens <hauke@hauke-m.de>
|
|
+ * Copyright 2010, Broadcom Corporation
|
|
+ *
|
|
+ * Licensed under the GNU/GPL. See COPYING for details.
|
|
+ */
|
|
+
|
|
+#include <linux/bcma/bcma.h>
|
|
+#include <linux/bcma/bcma_driver_chipcommon.h>
|
|
+#include <linux/delay.h>
|
|
+
|
|
+#include "bcma_private.h"
|
|
+
|
|
+#define NUM_RETRIES 3
|
|
+
|
|
+
|
|
+/* Issue a serial flash command */
|
|
+static inline void bcma_sflash_cmd(struct bcma_drv_cc *cc, u32 opcode)
|
|
+{
|
|
+ bcma_cc_write32(cc, BCMA_CC_FLASHCTL,
|
|
+ BCMA_CC_FLASHCTL_START | opcode);
|
|
+ while (bcma_cc_read32(cc, BCMA_CC_FLASHCTL) & BCMA_CC_FLASHCTL_BUSY)
|
|
+ ;
|
|
+}
|
|
+
|
|
+
|
|
+static inline void bcma_sflash_write_u8(struct bcma_drv_cc *cc,
|
|
+ u32 offset, u8 byte)
|
|
+{
|
|
+ bcma_cc_write32(cc, BCMA_CC_FLASHADDR, offset);
|
|
+ bcma_cc_write32(cc, BCMA_CC_FLASHDATA, byte);
|
|
+}
|
|
+
|
|
+/* Initialize serial flash access */
|
|
+int bcma_sflash_init(struct bcma_drv_cc *cc)
|
|
+{
|
|
+ u32 id, id2;
|
|
+
|
|
+ memset(&cc->sflash, 0, sizeof(struct bcma_sflash));
|
|
+
|
|
+ switch (cc->capabilities & BCMA_CC_CAP_FLASHT) {
|
|
+ case BCMA_CC_FLASHT_STSER:
|
|
+ /* Probe for ST chips */
|
|
+ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_DP);
|
|
+ bcma_cc_write32(cc, BCMA_CC_FLASHADDR, 0);
|
|
+ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_RES);
|
|
+ id = bcma_cc_read32(cc, BCMA_CC_FLASHDATA);
|
|
+ cc->sflash.blocksize = 64 * 1024;
|
|
+ switch (id) {
|
|
+ case 0x11:
|
|
+ /* ST M25P20 2 Mbit Serial Flash */
|
|
+ cc->sflash.numblocks = 4;
|
|
+ break;
|
|
+ case 0x12:
|
|
+ /* ST M25P40 4 Mbit Serial Flash */
|
|
+ cc->sflash.numblocks = 8;
|
|
+ break;
|
|
+ case 0x13:
|
|
+ /* ST M25P80 8 Mbit Serial Flash */
|
|
+ cc->sflash.numblocks = 16;
|
|
+ break;
|
|
+ case 0x14:
|
|
+ /* ST M25P16 16 Mbit Serial Flash */
|
|
+ cc->sflash.numblocks = 32;
|
|
+ break;
|
|
+ case 0x15:
|
|
+ /* ST M25P32 32 Mbit Serial Flash */
|
|
+ cc->sflash.numblocks = 64;
|
|
+ break;
|
|
+ case 0x16:
|
|
+ /* ST M25P64 64 Mbit Serial Flash */
|
|
+ cc->sflash.numblocks = 128;
|
|
+ break;
|
|
+ case 0x17:
|
|
+ /* ST M25FL128 128 Mbit Serial Flash */
|
|
+ cc->sflash.numblocks = 256;
|
|
+ break;
|
|
+ case 0xbf:
|
|
+ /* All of the following flashes are SST with
|
|
+ * 4KB subsectors. Others should be added but
|
|
+ * We'll have to revamp the way we identify them
|
|
+ * since RES is not eough to disambiguate them.
|
|
+ */
|
|
+ cc->sflash.blocksize = 4 * 1024;
|
|
+ bcma_cc_write32(cc, BCMA_CC_FLASHADDR, 1);
|
|
+ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_RES);
|
|
+ id2 = bcma_cc_read32(cc, BCMA_CC_FLASHDATA);
|
|
+ switch (id2) {
|
|
+ case 1:
|
|
+ /* SST25WF512 512 Kbit Serial Flash */
|
|
+ case 0x48:
|
|
+ /* SST25VF512 512 Kbit Serial Flash */
|
|
+ cc->sflash.numblocks = 16;
|
|
+ break;
|
|
+ case 2:
|
|
+ /* SST25WF010 1 Mbit Serial Flash */
|
|
+ case 0x49:
|
|
+ /* SST25VF010 1 Mbit Serial Flash */
|
|
+ cc->sflash.numblocks = 32;
|
|
+ break;
|
|
+ case 3:
|
|
+ /* SST25WF020 2 Mbit Serial Flash */
|
|
+ case 0x43:
|
|
+ /* SST25VF020 2 Mbit Serial Flash */
|
|
+ cc->sflash.numblocks = 64;
|
|
+ break;
|
|
+ case 4:
|
|
+ /* SST25WF040 4 Mbit Serial Flash */
|
|
+ case 0x44:
|
|
+ /* SST25VF040 4 Mbit Serial Flash */
|
|
+ case 0x8d:
|
|
+ /* SST25VF040B 4 Mbit Serial Flash */
|
|
+ cc->sflash.numblocks = 128;
|
|
+ break;
|
|
+ case 5:
|
|
+ /* SST25WF080 8 Mbit Serial Flash */
|
|
+ case 0x8e:
|
|
+ /* SST25VF080B 8 Mbit Serial Flash */
|
|
+ cc->sflash.numblocks = 256;
|
|
+ break;
|
|
+ case 0x41:
|
|
+ /* SST25VF016 16 Mbit Serial Flash */
|
|
+ cc->sflash.numblocks = 512;
|
|
+ break;
|
|
+ case 0x4a:
|
|
+ /* SST25VF032 32 Mbit Serial Flash */
|
|
+ cc->sflash.numblocks = 1024;
|
|
+ break;
|
|
+ case 0x4b:
|
|
+ /* SST25VF064 64 Mbit Serial Flash */
|
|
+ cc->sflash.numblocks = 2048;
|
|
+ break;
|
|
+ }
|
|
+ break;
|
|
+ }
|
|
+ break;
|
|
+
|
|
+ case BCMA_CC_FLASHT_ATSER:
|
|
+ /* Probe for Atmel chips */
|
|
+ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_AT_STATUS);
|
|
+ id = bcma_cc_read32(cc, BCMA_CC_FLASHDATA) & 0x3c;
|
|
+ switch (id) {
|
|
+ case 0xc:
|
|
+ /* Atmel AT45DB011 1Mbit Serial Flash */
|
|
+ cc->sflash.blocksize = 256;
|
|
+ cc->sflash.numblocks = 512;
|
|
+ break;
|
|
+ case 0x14:
|
|
+ /* Atmel AT45DB021 2Mbit Serial Flash */
|
|
+ cc->sflash.blocksize = 256;
|
|
+ cc->sflash.numblocks = 1024;
|
|
+ break;
|
|
+ case 0x1c:
|
|
+ /* Atmel AT45DB041 4Mbit Serial Flash */
|
|
+ cc->sflash.blocksize = 256;
|
|
+ cc->sflash.numblocks = 2048;
|
|
+ break;
|
|
+ case 0x24:
|
|
+ /* Atmel AT45DB081 8Mbit Serial Flash */
|
|
+ cc->sflash.blocksize = 256;
|
|
+ cc->sflash.numblocks = 4096;
|
|
+ break;
|
|
+ case 0x2c:
|
|
+ /* Atmel AT45DB161 16Mbit Serial Flash */
|
|
+ cc->sflash.blocksize = 512;
|
|
+ cc->sflash.numblocks = 4096;
|
|
+ break;
|
|
+ case 0x34:
|
|
+ /* Atmel AT45DB321 32Mbit Serial Flash */
|
|
+ cc->sflash.blocksize = 512;
|
|
+ cc->sflash.numblocks = 8192;
|
|
+ break;
|
|
+ case 0x3c:
|
|
+ /* Atmel AT45DB642 64Mbit Serial Flash */
|
|
+ cc->sflash.blocksize = 1024;
|
|
+ cc->sflash.numblocks = 8192;
|
|
+ break;
|
|
+ }
|
|
+ break;
|
|
+ }
|
|
+
|
|
+ cc->sflash.size = cc->sflash.blocksize * cc->sflash.numblocks;
|
|
+
|
|
+ return cc->sflash.size ? 0 : -ENODEV;
|
|
+}
|
|
+
|
|
+/* Read len bytes starting at offset into buf. Returns number of bytes read. */
|
|
+int bcma_sflash_read(struct bcma_drv_cc *cc, u32 offset, u32 len, u8 *buf)
|
|
+{
|
|
+ u8 *from, *to;
|
|
+ u32 cnt, i;
|
|
+
|
|
+ if (!len)
|
|
+ return 0;
|
|
+
|
|
+ if ((offset + len) > cc->sflash.size)
|
|
+ return -EINVAL;
|
|
+
|
|
+ if ((len >= 4) && (offset & 3))
|
|
+ cnt = 4 - (offset & 3);
|
|
+ else if ((len >= 4) && ((u32)buf & 3))
|
|
+ cnt = 4 - ((u32)buf & 3);
|
|
+ else
|
|
+ cnt = len;
|
|
+
|
|
+ from = (u8 *)KSEG0ADDR(BCMA_FLASH2 + offset);
|
|
+
|
|
+ to = (u8 *)buf;
|
|
+
|
|
+ if (cnt < 4) {
|
|
+ for (i = 0; i < cnt; i++) {
|
|
+ *to = readb(from);
|
|
+ from++;
|
|
+ to++;
|
|
+ }
|
|
+ return cnt;
|
|
+ }
|
|
+
|
|
+ while (cnt >= 4) {
|
|
+ *(u32 *)to = readl(from);
|
|
+ from += 4;
|
|
+ to += 4;
|
|
+ cnt -= 4;
|
|
+ }
|
|
+
|
|
+ return len - cnt;
|
|
+}
|
|
+
|
|
+/* Poll for command completion. Returns zero when complete. */
|
|
+int bcma_sflash_poll(struct bcma_drv_cc *cc, u32 offset)
|
|
+{
|
|
+ if (offset >= cc->sflash.size)
|
|
+ return -22;
|
|
+
|
|
+ switch (cc->capabilities & BCMA_CC_CAP_FLASHT) {
|
|
+ case BCMA_CC_FLASHT_STSER:
|
|
+ /* Check for ST Write In Progress bit */
|
|
+ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_RDSR);
|
|
+ return bcma_cc_read32(cc, BCMA_CC_FLASHDATA)
|
|
+ & BCMA_CC_FLASHDATA_ST_WIP;
|
|
+ case BCMA_CC_FLASHT_ATSER:
|
|
+ /* Check for Atmel Ready bit */
|
|
+ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_AT_STATUS);
|
|
+ return !(bcma_cc_read32(cc, BCMA_CC_FLASHDATA)
|
|
+ & BCMA_CC_FLASHDATA_AT_READY);
|
|
+ }
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+
|
|
+static int sflash_st_write(struct bcma_drv_cc *cc, u32 offset, u32 len,
|
|
+ const u8 *buf)
|
|
+{
|
|
+ int written = 1;
|
|
+
|
|
+ /* Enable writes */
|
|
+ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_WREN);
|
|
+ bcma_sflash_write_u8(cc, offset, *buf++);
|
|
+ /* Issue a page program with CSA bit set */
|
|
+ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_CSA | BCMA_CC_FLASHCTL_ST_PP);
|
|
+ offset++;
|
|
+ len--;
|
|
+ while (len > 0) {
|
|
+ if ((offset & 255) == 0) {
|
|
+ /* Page boundary, poll droping cs and return */
|
|
+ bcma_cc_write32(cc, BCMA_CC_FLASHCTL, 0);
|
|
+ udelay(1);
|
|
+ if (!bcma_sflash_poll(cc, offset)) {
|
|
+ /* Flash rejected command */
|
|
+ return -EAGAIN;
|
|
+ }
|
|
+ return written;
|
|
+ } else {
|
|
+ /* Write single byte */
|
|
+ bcma_sflash_cmd(cc,
|
|
+ BCMA_CC_FLASHCTL_ST_CSA |
|
|
+ *buf++);
|
|
+ }
|
|
+ written++;
|
|
+ offset++;
|
|
+ len--;
|
|
+ }
|
|
+ /* All done, drop cs & poll */
|
|
+ bcma_cc_write32(cc, BCMA_CC_FLASHCTL, 0);
|
|
+ udelay(1);
|
|
+ if (!bcma_sflash_poll(cc, offset)) {
|
|
+ /* Flash rejected command */
|
|
+ return -EAGAIN;
|
|
+ }
|
|
+ return written;
|
|
+}
|
|
+
|
|
+static int sflash_at_write(struct bcma_drv_cc *cc, u32 offset, u32 len,
|
|
+ const u8 *buf)
|
|
+{
|
|
+ struct bcma_sflash *sfl = &cc->sflash;
|
|
+ u32 page, byte, mask;
|
|
+ int ret = 0;
|
|
+
|
|
+ mask = sfl->blocksize - 1;
|
|
+ page = (offset & ~mask) << 1;
|
|
+ byte = offset & mask;
|
|
+ /* Read main memory page into buffer 1 */
|
|
+ if (byte || (len < sfl->blocksize)) {
|
|
+ int i = 100;
|
|
+ bcma_cc_write32(cc, BCMA_CC_FLASHADDR, page);
|
|
+ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_AT_BUF1_LOAD);
|
|
+ /* 250 us for AT45DB321B */
|
|
+ while (i > 0 && bcma_sflash_poll(cc, offset)) {
|
|
+ udelay(10);
|
|
+ i--;
|
|
+ }
|
|
+ BUG_ON(!bcma_sflash_poll(cc, offset));
|
|
+ }
|
|
+ /* Write into buffer 1 */
|
|
+ for (ret = 0; (ret < (int)len) && (byte < sfl->blocksize); ret++) {
|
|
+ bcma_sflash_write_u8(cc, byte++, *buf++);
|
|
+ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_AT_BUF1_WRITE);
|
|
+ }
|
|
+ /* Write buffer 1 into main memory page */
|
|
+ bcma_cc_write32(cc, BCMA_CC_FLASHADDR, page);
|
|
+ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_AT_BUF1_PROGRAM);
|
|
+
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+/* Write len bytes starting at offset into buf. Returns number of bytes
|
|
+ * written. Caller should poll for completion.
|
|
+ */
|
|
+int bcma_sflash_write(struct bcma_drv_cc *cc, u32 offset, u32 len,
|
|
+ const u8 *buf)
|
|
+{
|
|
+ struct bcma_sflash *sfl;
|
|
+ int ret = 0, tries = NUM_RETRIES;
|
|
+
|
|
+ if (!len)
|
|
+ return 0;
|
|
+
|
|
+ if ((offset + len) > cc->sflash.size)
|
|
+ return -EINVAL;
|
|
+
|
|
+ sfl = &cc->sflash;
|
|
+ switch (cc->capabilities & BCMA_CC_CAP_FLASHT) {
|
|
+ case BCMA_CC_FLASHT_STSER:
|
|
+ do {
|
|
+ ret = sflash_st_write(cc, offset, len, buf);
|
|
+ tries--;
|
|
+ } while (ret == -EAGAIN && tries > 0);
|
|
+
|
|
+ if (ret == -EAGAIN && tries == 0) {
|
|
+ pr_info("ST Flash rejected write\n");
|
|
+ ret = -EIO;
|
|
+ }
|
|
+ break;
|
|
+ case BCMA_CC_FLASHT_ATSER:
|
|
+ ret = sflash_at_write(cc, offset, len, buf);
|
|
+ break;
|
|
+ }
|
|
+
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+/* Erase a region. Returns number of bytes scheduled for erasure.
|
|
+ * Caller should poll for completion.
|
|
+ */
|
|
+int bcma_sflash_erase(struct bcma_drv_cc *cc, u32 offset)
|
|
+{
|
|
+ struct bcma_sflash *sfl;
|
|
+
|
|
+ if (offset >= cc->sflash.size)
|
|
+ return -EINVAL;
|
|
+
|
|
+ sfl = &cc->sflash;
|
|
+ switch (cc->capabilities & BCMA_CC_CAP_FLASHT) {
|
|
+ case BCMA_CC_FLASHT_STSER:
|
|
+ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_WREN);
|
|
+ bcma_cc_write32(cc, BCMA_CC_FLASHADDR, offset);
|
|
+ /* Newer flashes have "sub-sectors" which can be erased independently
|
|
+ * with a new command: ST_SSE. The ST_SE command erases 64KB just as
|
|
+ * before.
|
|
+ */
|
|
+ if (sfl->blocksize < (64 * 1024))
|
|
+ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_SSE);
|
|
+ else
|
|
+ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_SE);
|
|
+ return sfl->blocksize;
|
|
+ case BCMA_CC_FLASHT_ATSER:
|
|
+ bcma_cc_write32(cc, BCMA_CC_FLASHADDR, offset << 1);
|
|
+ bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_AT_PAGE_ERASE);
|
|
+ return sfl->blocksize;
|
|
+ }
|
|
+
|
|
+ return 0;
|
|
+}
|
|
--- a/drivers/bcma/driver_mips.c
|
|
+++ b/drivers/bcma/driver_mips.c
|
|
@@ -185,7 +185,13 @@ static void bcma_core_mips_flash_detect(
|
|
switch (bus->drv_cc.capabilities & BCMA_CC_CAP_FLASHT) {
|
|
case BCMA_CC_FLASHT_STSER:
|
|
case BCMA_CC_FLASHT_ATSER:
|
|
- pr_err("Serial flash not supported.\n");
|
|
+#ifdef CONFIG_BCMA_SFLASH
|
|
+ pr_info("found serial flash.\n");
|
|
+ bus->drv_cc.flash_type = BCMA_SFLASH;
|
|
+ bcma_sflash_init(&bus->drv_cc);
|
|
+#else
|
|
+ pr_info("serial flash not supported.\n");
|
|
+#endif /* CONFIG_BCMA_SFLASH */
|
|
break;
|
|
case BCMA_CC_FLASHT_PARA:
|
|
pr_info("found parallel flash.\n");
|
|
--- a/include/linux/bcma/bcma_driver_chipcommon.h
|
|
+++ b/include/linux/bcma/bcma_driver_chipcommon.h
|
|
@@ -375,6 +375,7 @@ struct bcma_chipcommon_pmu {
|
|
#ifdef CONFIG_BCMA_DRIVER_MIPS
|
|
enum bcma_flash_type {
|
|
BCMA_PFLASH,
|
|
+ BCMA_SFLASH,
|
|
};
|
|
|
|
struct bcma_pflash {
|
|
@@ -383,6 +384,14 @@ struct bcma_pflash {
|
|
u32 window_size;
|
|
};
|
|
|
|
+#ifdef CONFIG_BCMA_SFLASH
|
|
+struct bcma_sflash {
|
|
+ u32 blocksize; /* Block size */
|
|
+ u32 numblocks; /* Number of blocks */
|
|
+ u32 size; /* Total size in bytes */
|
|
+};
|
|
+#endif /* CONFIG_BCMA_SFLASH */
|
|
+
|
|
struct bcma_serial_port {
|
|
void *regs;
|
|
unsigned long clockspeed;
|
|
@@ -405,6 +414,9 @@ struct bcma_drv_cc {
|
|
enum bcma_flash_type flash_type;
|
|
union {
|
|
struct bcma_pflash pflash;
|
|
+#ifdef CONFIG_BCMA_SFLASH
|
|
+ struct bcma_sflash sflash;
|
|
+#endif /* CONFIG_BCMA_SFLASH */
|
|
};
|
|
|
|
int nr_serial_ports;
|
|
@@ -459,4 +471,14 @@ extern void bcma_chipco_chipctl_maskset(
|
|
extern void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc,
|
|
u32 offset, u32 mask, u32 set);
|
|
|
|
+#ifdef CONFIG_BCMA_SFLASH
|
|
+/* Chipcommon sflash support. */
|
|
+int bcma_sflash_read(struct bcma_drv_cc *cc, u32 offset, u32 len,
|
|
+ u8 *buf);
|
|
+int bcma_sflash_poll(struct bcma_drv_cc *cc, u32 offset);
|
|
+int bcma_sflash_write(struct bcma_drv_cc *cc, u32 offset, u32 len,
|
|
+ const u8 *buf);
|
|
+int bcma_sflash_erase(struct bcma_drv_cc *cc, u32 offset);
|
|
+#endif /* CONFIG_BCMA_SFLASH */
|
|
+
|
|
#endif /* LINUX_BCMA_DRIVER_CC_H_ */
|